Selective photodynamic effects on cervical adenocarcinoma cells provided by F127 Pluronic®-based micelles modulating hypericin delivery

Abstract Cervical cancer is a leading cause of death among women. The endocervical adenocarcinoma (ECA) represents an aggressive and metastatic type of cancer with no effective treatment options currently available. We evaluated the antitumoral and anti-migratory effects of hypericin (HYP) encapsulated on Pluronic F127 (F127/HYP) photodynamic therapy (PDT) against a human cell line derived from invasive cervical adenocarcinoma (HeLa) compared to a human epithelial cell line (HaCaT). The phototoxicity and cytotoxicity of F127/HYP were evaluated by the following assays: colorimetric assay, MTT, cellular morphological changes by microscopy and long-term cytotoxicity by clonogenic assay. In addition, we performed fluorescence microscopy to analyze cell uptake and subcellular distribution of F127/HYP, cell death pathway and reactive oxygen species (ROS) production. The PDT mechanism was determined with sodium azide and D-mannitol and cell migration by wound-healing assay. The treatment with F127/HYP promoted a phototoxic result in the HeLa cells in a dose-dependent and selective form. Internalization of F127/HYP was observed mainly in the mitochondria, causing cell death by necrosis and ROS production especially by the type II PDT mechanism. Furthermore, F127/HYP reduced the long-term proliferation and migration capacity of HeLa cells. Overall, our results indicate a potentially application of F127/HYP micelles as a novel approach for PDT with HYP delivery to more specifically treat ECA.

Poloxamer-enhanced solubility of griseofulvin and its related antifungal activity against Trichophyton spp

Abstract Poorly water-soluble drugs, such as the antifungal drug griseofulvin (GF), exhibit limited bioavailability, despite their high membrane permeability. Several technological approaches have been proposed to enhance the water solubility and bioavailability of GF, including micellar solubilization. Poloxamers are amphiphilic block copolymers that increase drug solubility by forming micelles and supra-micellar structures via molecular self-association. In this regard, the aim of this study was to evaluate the water solubility increment of GF by poloxamer 407 (P407) and its effect on the antifungal activity against three Trichophyton mentagrophytes and two T. rubrum isolates. The GF water solubility profile with P407 revealed a non-linear behavior, well-fitted by the sigmoid model of Morgan-Mercer-Flodin. The polymer promoted an 8-fold increase in GF water solubility. Fourier-transform infrared (FT-IR) spectroscopy, differential scanning calorimetry (DSC), and 2D nuclear magnetic resonance (NMR Roesy) spectroscopy suggested a GF-P407 interaction, which occurs in the GF cyclohexene ring. These results were supported by an increase in the water solubility of the GF impurities with the same molecular structure. The MIC values recorded for GF ranged from 0.0028 to 0.0172 mM, except for T. Mentagrophytes TME34. Notably, the micellar solubilization of GF did not increase its antifungal activity, which could be related to the high binding constant between GF and P407.

Injectable Micelle-Incorporated Hydrogels for the Localized Chemo-Immunotherapy of Breast Tumors.

Although immune checkpoint blockade (ICB) holds potential for the treatment of various tumors, a considerable proportion of patients show a limited response to ICB therapy due to the low immunogenicity of a variety of tumors. It has been shown that some chemotherapeutics can turn low-immunogenic tumors into immunogenic phenotypes by inducing a cascade of immune responses. In this paper, we synthesized an injectable micelle-incorporated hydrogel, which was able to sequentially release the chemotherapeutic gemcitabine (GEM) and the hydrophobic indoleamine 2, 3-dioxygenase inhibitor, d-1-methyltryptophan (d-1MT) at tumor sites. The hydrogel was formed via the thiol-ene click reaction between the thiolated chondroitin sulfate and the micelle formed by amphiphilic methacrylated Pluronic F127, in which hydrophobic d-1MT was encapsulated in the core of the F127 micelles and the hydrophilic GEM was dispersed in the hydrogel network. The successive release of chemotherapeutics and immune checkpoint inhibitors at tumor tissues will first promote the infiltration of cytotoxic T lymphocytes and subsequently induce a robust antitumor immune response, ultimately exerting a synergetic therapeutic efficacy. In a 4T1 tumor-bearing mice model, our results showed that the combination of chemotherapy and immunotherapy through the micelle-incorporated hydrogel triggered an effective antitumor immune response and inhibited tumor metastasis to the lung. Our results highlight the potential of the injectable micelle-incorporated hydrogel for the localized chemo-immunotherapy in the treatment of breast tumors.

Nanoencapsulated hypericin in P-123 associated with photodynamic therapy for the treatment of dermatophytosis.

The antifungal application of photodynamic therapy (PDT) has been widely explored. According to superficial nature of tinea capitis and the facility of application of light sources, the use of nanoencapsulated hypericin in P-123 associated with PDT (P123-Hy-PDT) has been a poweful tool to treat this pathology. Thus, the aim of this study was to evaluate the efficiency of P123-Hy-PDT against planktonic cells and in a murine model of dermatophytosis caused by Microsporum canis. In vitro antifungal susceptibility and in vivo efficiency tests were performed, including a skin toxicity assay, analysis of clinical signs by evaluating score, and photoacoustic spectroscopy. In addition, tissue analyses by histopathology and levels of pro-inflammatory cytokines, such as quantitative and qualitative antifungal assays, were employed. The in vitro assays demonstrated antifungal susceptibility with 6.25 and 12.5 µmol/L P123-Hy-PDI; these experiments are the first that have used this treatment of animals. P123-Hyp-mediated PDT showed neither skin nor biochemical alteration in vivo; it was safe for dermatophytosis treatment. Additionally, the treatment revealed rapid improvement in clinical signs at the site of infection after only three treatment sessions, with a clinical score confirmed by photoacoustic spectroscopy. The mycological reduction occurred after six treatment sessions, with a statistically significant decrease compared with untreated infected animals. These findings showed that P123-Hy-PDT restored tissue damage caused by infection, a phenomenon confirmed by histopathological analysis and proinflammatory cytokine levels. Our results reveal for the first time that P123-Hy-PDT is a promising treatment for tinea capitis and tinea corporis caused by M. canis, because it showed rapid clinical improvement and mycological reduction without causing toxicity.

Desenvolvimento e caracterização de dispersões sólidas de efavirenz / Development and characterization of efavirenz solid dispersions

A baixa solubilidade aquosa dos insumos farmacêuticos ativos (IFA) é um grande desafio no desenvolvimento de formulações farmacêuticas, pois pode resultar em biodisponibilidade insuficiente e variável. Diversas estratégias de modificação do estado sólido dos compostos ativos, têm sido propostas para incrementar a solubilidade de fármacos pouco solúveis em água. Dentre as estratégias abordadas a ispersão sólida (DS) é uma das formas mais promissoras de aumentar a solubilidade, dissolução e a biodisponibilidade de IFAs com baixa solubilidade aquosa. O efavirenz (EFV) é um inibidor não nucleosídeo da transcriptase reversa (NNRTI) e um dos componentes da terapia antirretroviral de alta atividade (HAART), sendo parte da primeira linha de tratamento de infecções do vírus HIV tipo 1. O antirretroviral está classificado como pertencente à classe II do SCB, e exibe baixa solubilidade aquosa (solubilidade menor que 10 µg/mL) e alta permeabilidade com absorção dependente da taxa de dissolução, resultando em biodisponibilidade oral baixa e variável. A administração de fármacos pouco solúveis na forma de DS é um método atraente para aumentar a biodisponibilidade in vivo. Neste estudo, um método de triagem rápida por evaporação de solvente foi empregado para preparar DS de EFV, variando-se proporções em misturas compostas pelos carreadores, polivinilpirrolidona K-28/32 (PVP K-28/32), copovidona (CoPVP), hidroxipropilmetilcelulose ftalato (HPMCP-50, HPMCP-55 e HPMCP-55s), poloxâmero 188 (P188) e poloxâmero 407 (P407). A solubilidade das DS foi avaliada por meio do método do equilíbrio (shake-flask), onde selecionou-se os polímeros P188 e P407 que conduziram a uma elevada capacidade de saturação em meio aquoso, superior a 1.000 vezes ao fármaco puro. As propriedades físico-químicas e do estado sólido das amostras foram avaliadas por meio de calorimetria exploratória diferencial (DSC); termogravimetria (TG); espectroscopia do infravermelho com transformada de Fourier (FTIR), difratometria de raios X pelo método do pó (DRXP) e ensaios de dissolução com emprego do aparato IV USP. Os resultados de DRXP demonstraram que os carreadores P188 e P407 foram capazes de estabilizar o EFV na forma amorfa nas DS, fato esse evidenciado pela ausência de picos característicos do antirretroviral

he low aqueous solubility of the active pharmaceutical ingredient (API) is a major challenge in the development of pharmaceutical formulations as it may result in insufficient and variable bioavailability. Several strategies for modifying the solid-state of the active compounds have been proposed to increase solubility of drugs that are poorly soluble in water. Among the strategies approaches, solid dispersion (SD) is one of the most promising ways to increase solubility, dissolution and bioavailability of APIs with low aqueous solubility. Efavirenz (EFV) is a non-nucleoside reverse transcriptase inhibitor (NNRTI) and one of the components of highly active antiretroviral therapy (HAART), being part of the first line of treatment of type 1 HIV virus infections. The antiretroviral is classified as belonging to BCS class II, and exhibits low aqueous solubility (solubility less than 10 µg / mL) and high permeability with dissolution ratedependent absorption, resulting in low and variable oral bioavailability. Drug delivery of poorly aqueous soluble drugs in form SD is an appealing method to increase in vivo bioavailability. In this study, a fast screening method of solvent evaporation method was used to prepare EFV SD, varying the proportions in mixtures composed by the carriers polyvinylpyrrolidone K-28/32 (PVP K-28/32), copovidone (CoPVP), hydroxypropylmethylcellulose phthalate (HPMCP-50, HPMCP-55 e HPMCP-55s), poloxamer 188 (P188) e poloxamer 407 (P407). The solubility of the samples was evaluated by the method of equilibrium (shake-flask), wherein the polymers P188 and P407 were selected due to the capacity to promote high saturation in aqueous medium, 1,000 times superior to the pure drug. The physicochemical and solid-state properties of the samples were evaluated by differential scanning calorimetry (DSC); thermogravimetry (TG); Fourier transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRPD) and dissolution assays using the IV USP apparatus. The results of XRPD demonstrated that the carriers P188 and P407 were able to stabilize the EFV in amorphous form in the SD, a fact evidenced by the absence of characteristic peaks of the antiretroviral

Impact of solid surface hydrophobicity and micrococcal nuclease production on Staphylococcus aureus Newman biofilms.

Staphylococcus aureus is commonly associated with biofilm-related infections and contributes to the large financial loss that accompany nosocomial infections. The micrococcal nuclease Nuc1 enzyme limits biofilm formation via cleavage of eDNA, a structural component of the biofilm matrix. Solid surface hydrophobicity influences bacterial adhesion forces and may as well influence eDNA production. Therefore, it is hypothesized that the impact of Nuc1 activity is dependent on surface characteristics of solid surfaces. For this reason, this study investigated the influence of solid surface hydrophobicity on S. aureus Newman biofilms where Nuc1 is constitutively produced. To this end, biofilms of both a wild-type and a nuc1 knockout mutant strain, grown on glass, salinized glass and Pluronic F-127-coated silanized glass were analysed. Results indicated that biofilms can grow in the presence of Nuc1 activity. Also, Nuc1 and solid surface hydrophobicity significantly affected the biofilm 3D-architecture. In particular, biofilm densities of the wild-type strain on hydrophilic surfaces appeared higher than of the mutant nuc1 knockout strain. Since virulence is related to bacterial cell densities, this suggests that the virulence of S. aureus Newman biofilms is increased by its nuclease production in particular on a hydrophilic surface.

Novel folated pluronic F127 modified liposomes for delivery of curcumin: preparation, release, and cytotoxicity.

Aim: A novel folated pluronic F127 (FA-F127) was synthesised, so as to modify liposomes with FA group on the surface, and evaluate the effects of FA-F127 modification on the properties of the modified liposomes.Methods: FA was linked to one end of pluronic F127, via the terminal OH group, to obtain FA-F127 and the structure was characterised. FA-F127 modified curcumin liposomes (cur-FA-F127-Lps) were prepared. The physicochemical characteristics of cur-FA-F127-Lps, including morphology and particle size, were studied. The in vitro cytotoxicity of cur-FA-F127-Lps against KB cancer cells was determined by MTT tests.Results: The effects of FA-F127 modification on the average particle size, PDI, curcumin encapsulation efficiency and microstructure were not significant. Compared with nonfolated F127 liposomes (cur-F127-Lps), cur-FA-F127-Lps exhibited significantly higher cytotoxicity towards KB cells.Conclusions: Folic acid modified liposomes provide a novel strategy to improve the chemotherapeutic efficacy of hydrophobic bioactive compounds.

Eradication of cancer stem cells in triple negative breast cancer using doxorubicin/pluronic polymeric micelles.

The potency of polymeric micelle-based doxorubicin, SP1049C, against cancer stem cells (CSCs) in triple negative breast cancer (TNBC) is evaluated. CSCs with high epithelial specific antigen (ESA), high CD44 and low CD24 expression levels were derived from the TNBC cancer cells, MDA-MB-231 and MDA-MB-468. These CSCs were resistant to free doxorubicin (Dox) and displayed increased colony formation, migration, and invasion in vitro, along with higher tumorigenicity in vivo, compared to the parental and non-CSCs counterparts. SP1049C downregulated the expression and inhibited the functional activity of the breast cancer resistance protein (BCRP/ABCG2) in CSCs. The polymeric micelle drug had higher cytotoxicity and potency in reducing the colony formation of CSCs compared to the free drug. It was also more potent in inhibiting the tumor growth in the orthotopic animal tumor models derived from CSCs. These results indicate that SP1049C is active against CSCs and has potential in treating TNBC.

Screening of Ketoprofen-Poloxamer and Ketoprofen-Eudragit solid dispersions for improved physicochemical characteristics and dissolution profile

The aim of the present study was to enhance the dissolution rate of an NSAID drug Ketoprofen by formulating it into solid dispersions with water soluble carrier Poloxamer 188 and Eudragit S 100. The solid dispersions of Ketoprofen with Poloxamer 188 were prepared at 1:1, 1:1.5 and 1:2 (Ketoprofen: Poloxamer 188) ratio by Solvent evaporation methods. The same concentration ratio was used for the preparation of solid dispersion with Eudragit S 100 by melting/fusion technique. Further, solid dispersions were investigated by solubility, ATR-FTIR, XRD, DSC, surface morphology, in-vitro dissolution and accelerated stability study. Results demonstrated that both Poloxamer 188 and Eudragit S 100 improve solubility of drugs by 8­10 folds. The result of ATR-FTIR study showed the slight shifting/broadening of principle peaks. In vitro dissolution studies showed that in the solid dispersion system containing Ketoprofen: Poloxamer 188 batch P2 (1:1.5) gives faster dissolution rate of Ketoprofen than the physical mixtures. The solid dispersion with Eudragit S 100, batch E1 (1:1) gives faster dissolution rate of Ketoprofen than the physical mixtures. In phase solubility study with Poloxamer 188 showed concentration dependent solubilization of drug but Eudragit S 100 produced opposite result. The effect of pH on solubility of Eudragit S 100 was carried out which showed solubility at pH 7.4. The dissolution profile of solid dispersion with Eudragit S 100 at pH 7.4 gives excellent result. The Accelerated stability of solid dispersions & its physical mixtures were studied at 400±2 °C/75 ± 5% RH for a period of 1 month. In these studies, Solid Dispersion batches produced an unstable formulation. The Ketoprofen solid dispersions with Poloxamer 188 and Eudragit S 100 could be introduced as a suitable form with improved solubility

Vepoloxamer Enhances Fibrinolysis of tPA (Tissue-Type Plasminogen Activator) on Acute Ischemic Stroke.

Background and Purpose- Thrombolytic treatment of acute ischemic stroke with tPA (tissue-type plasminogen activator) is hampered by its narrow therapeutic window and potential hemorrhagic complication. Vepoloxamer is a nonionic surfactant that exerts potent hemorheologic and antithrombotic properties in various thrombotic diseases. The current study investigated the effect of vepoloxamer on tPA treatment in a rat model of embolic stroke. Methods- Male Wistar rats subjected to embolic middle cerebral artery occlusion were treated with the combination of vepoloxamer and tPA, vepoloxamer alone, tPA alone, or saline initiated 4 hours after middle cerebral artery occlusion. Results- Monotherapy with tPA did not reduce infarct volume, and adversely potentiated microvascular thrombosis and vascular leakage compared with the saline treatment. Vepoloxamer monotherapy reduced infarct volume by 25% and improved brain perfusion. However, the combination treatment with vepoloxamer and tPA significantly reduced infarct volume by 32% and improved neurological function, without increasing the incidence of gross hemorrhage. Compared with vepoloxamer alone, the combination treatment with vepoloxamer and tPA robustly reduced secondary thrombosis and tPA-augmented microvascular leakage and further improved brain perfusion, which was associated with substantial reductions of serum active PAI-1 (plasminogen activator inhibitor-1) level and tPA-upregulated PAI-1 in the ischemic brain. Mechanistically, exosomes derived from platelets of ischemic rats treated with tPA-augmented cerebral endothelial barrier permeability and elevated protein levels of PAI-1 and TF (tissue factor) in the endothelial cells, whereas exosomes derived from platelets of rats subjected to the combination treatment with vepoloxamer and tPA diminished endothelial permeability augmented by tPA and fibrin and reduced PAI-1 and TF levels in the endothelial cells. Conclusions- The combination treatment with vepoloxamer and tPA exerts potent thrombolytic effects in rats subjected to acute ischemic stroke. Vepoloxamer reduces tPA-aggravated prothrombotic effect of platelet-derived exosomes on cerebral endothelial cells, which may contribute to the therapeutic effect of the combination treatment.

Loading of some quinoxaline derivatives in poly (l-lactic) acid/Pluronic® F-127 nanofibers enhances their anticancer efficiency and induces a p53 and p21 apoptotic-signaling pathway.

The objective of this study was to evaluate the anticancer activity on cancer cell models of a drug delivery system consisting of poly (l-lactic) acid/Pluronic® F-127 (PLLA/PF127) loaded with the new N-butylpyridoquinoxaline 1,4-dioxide (NBPQD) or 2-amino-3-cyano-6-methylquinoxaline 1,4-dioxide (ACMQD) that was synthesized using an electrospinning process compared to free NBPQD and ACMQD. PLLA/PF127-NBPQD and PLLA/PF127-ACMQD nanofibers were prepared, and their shape, size, Fourier-transform infrared spectroscopy (FTIR), thermogravimetric (TGA) analysis, water contact angel (WCA), drug release, anticancer activity against five human cancer cell lines, and flowcytometeric analyses of cell cycle, p21 and p53 activities were investigated. PLLA/PF127 nanofibers with NBPQD or ACMQD were smooth, and no NBPQD or ACMQD clusters were found on nanofibers surface. FTIR analysis indicated that intermolecular hydrogen bonding between NBPQD or ACMQD and the polymer matrix is present. PLLA/PF127 nanofibers with NBPQD or ACMQD showed quite stable thermal stability with degradation at about 400 °C, and showed high WCA values of 68.72 ± 3.83° and 110.59 ± 0.21°, respectively. They showed higher in vitro anticancer activity towards all investigated cell lines compared to free NBPQD or free ACMQD. The lowest IC50 value for PLLA/PF127-NBPQD was 1.7 µg/ml with colorectal carcinoma (HCT-116) and was 4.5 µg/ml for PLLA/PF127-ACMQD with hepatocellular carcinoma (HepG2). PLLA/PF127 nanofibers with NBPQD or ACMQD increased anticancer efficiency via inducing cancer cell apoptosis through activation of a p53 and p21 apoptotic-signaling pathway.

Hypericin photodynamic activity. Part III: in vitro evaluation in different nanocarriers against trypomastigotes of Trypanosoma cruzi.

Chagas is a parasitic endemic disease caused by the protozoan Trypanosoma cruzi. It represents a strong threat to public health due to its strong resistance against commonly available drugs. We studied the in vitro ability to inactivate the trypomastigote form of this parasite using photodynamic inactivation of microorganisms (or antimicrobial Photodynamic Therapy, aPDT). For this, we chose to use the photosensitizer hypericin (Hyp) formulated in ethanol/water (1% v/v) and Hyp loaded in the dispersion of different aqueous nanocarrier systems. These included polymeric micelles of F-127 and P-123 (both Pluronic™ surfactants), and liposomal vesicles of phospholipid 2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC). These systems with Hyp had their activity compared against trypomastigote forms under light and in the dark. Hyp revealed a high level of effectiveness to eradicate protozoa in vitro. Samples at concentrations higher than 0.8 µmol L-1 of Hyp in Pluronic micelles showed efficacy even in the dark, with the EC50 around (6-8) µmol L-1. Therefore, Hyp/Pluronics can be used also as a chemotherapeutic agent. The best result for EC50 is at approximately 0.31 µmol L-1 for illuminated systems of Hyp in F-127 micelles. For Hyp in P-123 micelles under light, the results also led to a low EC50 value of 0.36 µmol L-1. The highest value of EC50 was 2.22 µmol L-1, which was found for Hyp/DPPC liposomes under light. For the Hyp-free (ethanol/water, 1% v/v)/illuminated group, the EC50 value was 0.37 µmol L-1, which also is a value that shows effectiveness. However, in free-form, Hyp is not protected against blood components, unlike when Hyp is loaded into the nanocarriers.

Synthesis of Zwitterionic Pluronic Analogs.

Novel polymer amphiphiles with chemical structures designed as zwitterionic analogs of Pluronic block copolymers were prepared by controlled free radical polymerization of phosphorylcholine (PC) or choline phosphate (CP) methacrylate monomers from a difunctional poly(propylene oxide) (PPO) macroinitiator. Well-defined, water-dispersible zwitterionic triblock copolymers, or "zwitteronics", were prepared with PC content ranging from 5 to 47 mol percent and composition-independent surfactant characteristics in water, which deviate from the properties of conventional Pluronic amphiphiles. These PC-zwitteronics assembled into nanoparticles in water, with tunable sizes and critical aggregation concentrations (CACs) based on their hydrophilic-lipophilic balance (HLB). Owing to the lower critical solution temperature (LCST) miscibility of the hydrophobic PPO block in water, PC-zwitteronics exhibited thermoreversible aqueous solubility tuned by block copolymer composition. The chemical versatility of this approach was demonstrated by embedding functionality, in the form of alkyne groups, directly into the zwitterion moieties. These alkynes proved ideal for cross-linking the zwitteronic nanoparticles and for generating nanoparticle-cross-linked hydrogels using UV-initiated thiol-yne "click" chemistry.

Synthesis, characterization, and biological verification of anti-HER2 indocyanine green-doxorubicin-loaded polyethyleneimine-coated perfluorocarbon double nanoemulsions for targeted photochemotherapy of breast cancer cells.

BACKGROUND: Breast cancer is the most frequently diagnosed cancer and the leading cause of cancer death among females worldwide. Among various types of breast cancer, the human epidermal growth factor receptor 2 (HER2)-overexpressing breast cancer is known to be more aggressive and often resistant to medicinal treatment, leading to an insufficient prognosis and poor susceptibility to chemotherapy and/or hormonal therapy in the current clinic. These circumstances implicate that developing an improved therapeutic strategy rather than persistently changing the anticancer drugs for trying is truly needed to successfully cure this type of breast cancer. In this study, we aimed to fabricate anti-HER2 indocyanine green (ICG)-doxorubicin (DOX)-loaded polyethyleneimine-coated perfluorocarbon double nanoemulsions (HIDPPDNEs) to explore the co-administration of phototherapy and chemotherapy for HER2-overexpressing breast cancer in vitro. RESULTS: The HIDPPDNE was first characterized as a sphere-like nanoparticle with surface charge of -57.1 ± 5.6 mV and size of 340.6 ± 4.5 nm, whereas the DOX release rates for the nanodroplets within 48 h in 4 and 37 °C were obtained by 8.13 ± 2.46% and 19.88 ± 2.75%, respectively. We then examined the target-ability of the nanostructure and found that the adhesion efficiency of the HIDPPDNEs onto HER2+ MDA-MB-453 cells was threefold higher than the nanodroplets without anti-HER2 antibody, indicating that the HIDPPDNEs are the product with HER2 binding specificity. In comparison to freely dissolved ICG, the HIDPPDNEs conferred an enhanced thermal stability to the entrapped ICG, and were able to provide a comparable hyperthermia effect and markedly increased production of singlet oxygen under near infrared irradiation (808 nm; 6 W/cm2). Based on the viability analyses, the results showed that the HIDPPDNEs were effective on cell eradication upon near infrared irradiation (808 nm; 6 W/cm2), and the resulting cell mortality was even higher than that caused by using twice amount of encapsulated DOX or ICG alone. CONCLUSIONS: This work demonstrates that the HIDPPDNEs are able to provide improved ICG stability, binding specificity, and enhanced anticancer efficacy as compared to equal dosage of free ICG and/or DOX, showing a high potential for use in HER2 breast cancer therapy with reduced chemotoxicity.

Nanostructured Polymeric Micelles Carrying Xanthene Dyes for Photodynamic Evaluation.

It was evaluated the properties of the xanthene dyes Erythrosin B, Eosin Y and theirs Methyl, Butyl and Decyl ester derivatives as possible photosensitizers (PS) for photodynamic treatments. The more hydrophobic dyes self-aggregate in water/ethanol solutions above 70% water (vol/vol) in the mixture. In buffered water, these PS were encapsulated in Pluronic polymeric surfactants of P-123 and F-127 by two methodologies: direct addition and the thin-film solid dispersion methods. The thin-film solid method provided formulations with higher stabilities besides effective encapsulation of the PS as monomers. Size measurements demonstrated that Pluronic forms self-assembled micelles with uniform size, which present slightly negative surface potential and a spherical form detected by TEM microscopy. The ester length modulates xanthene localization in the micelle, which is deeper with the increase in the alkyl chain. Moreover, some PS are distributed into two populations: one on the corona micelle interface shell (PEO layer) and the other into the core (PPO region). Although all PS formulations show high singlet oxygen quantum yield, promising results were obtained for Erythrosin B esters with the hydrophobic P-123, which ensures their potential as drug for clinical photodynamic applications.

Encapsulation of Antioxidant Gallate Derivatives in Biocompatible Poly(ε-caprolactone)-b-Pluronic-b-Poly(ε-caprolactone) Micelles.

Formulation of antioxidant agents is still a challenge that limits their application in the biomedical field. Pentablock copolymers obtained through modification of two common PEO-PPO-PEO copolymers (Pluronic F127 and F68) with poly(ε-carprolactone) (PCL) were evaluated regarding their capability to form nanocarriers suitable for gallic acid, methyl gallate, and ethyl gallate. Applying a dialysis method, PCL/F127/PCL and PCL/F68/PCL self-assembled into spherical micelles in 0.9% NaCl aqueous solution but notably differed in critical micellar concentration (CMC), micelle core hydrophobicity, and micelle size, as evidenced by pyrene fluorescence, transmission electron microscopy, and dynamic light scattering. Cytotoxicity studies showed that the copolymers were safe at concentrations well above the CMC. Transfer of gallic acid and derivatives from aqueous medium to the micelle phase was characterized in terms of distribution constant and free energy of transference, which were shown to be strongly dependent on the hydrophobicity of the gallate derivatives and the length of PCL in the pentablock copolymer. Antioxidant activity of gallates was challenged against DPPH previously loaded in PCL/F127/PCL and PCL/F68/PCL micelles. The more the hydrophobicity of the gallate derivative, the greater the capability to enter in the micelle and to consume free radicals. In vitro release studies of gallic acid, methyl gallate, and ethyl gallate from the pentablock copolymer micelles also evidenced the influence of the hydrophobicity of both the gallate derivative and the micelle core on release rate, recording a variety of release patterns. Overall, PCL/F127/PCL and PCL/F68/PCL appear as suitable nanocarriers of potent antioxidant agents in a wide range of polarities, which may be useful for diverse therapeutic applications.

Nitric oxide-releasing polymer incorporated ointment for cutaneous wound healing.

This work demonstrates the development of nitric oxide-releasing ointment and its potential on efficient wound healing. Nitric oxide-releasing polymer was successfully synthesized, which is composed of biocompatible Pluronic F127, branched polyethylenimine and 1-substituted diazen-1-ium-1,2-diolates. The synthesized nitric oxide-releasing polymer was incorporated into the PEG-based ointment which not only facilitated nitric oxide release in a slow manner, but also served as a moisturizer to enhance the wound healing. As compared to control groups, the nitric oxide-releasing ointment showed the accelerated wound closure with enhanced re-epithelialization, collagen deposition, and blood vessel formation in vivo. Therefore, this nitric oxide-based ointment presents the promising potential for the efficient strategy to heal the cutaneous wound.

In vitro characterisation of Span 65 niosomal formulations containing proteins.

Proteins can be encapsulated in niosomes as they are known to protect proteins against the surrounding environment. Niosomes of Span 65/cholesterol/pluronic F -127 were prepared by thin film hydration method. Insulin and lysozyme were chosen as model proteins. Niosomes were characterised for morphology by Transmission Electron Microscopy (TEM) and vesicles size using Dynamic Light Scattering. The entrapment efficiency of protein in niosomes was determined by complete vesicle disruption using 50:50% isopropanol:buf fer, followed by analysis of the resulting solutions by HPLC method. Thermal behaviour of the niosomes was investigated using Differential Scanning Calorimetry (DSC). Protection of proteins against simulated gastric fluid (SGF) and simulated intestinal fluid (SIF) were also assessed. The results showed that niosomes prepared with different molar ratios % of Span 65, cholesterol and pluronic F-127 successfully produced with insulin and lysozyme. For insulin containing niosomes, the ratio % of 64.7 (Span 65): 32.3 (cholesterol): 3.0 (pluronic F - 127) produced the highest protein encapsulation efficiency and the smallest vesicle size of 653.6 nm. For lysozyme containing niosomes, the maximum protein encapsulation was found in 72.75/24.25/3.00% molar ratio of Span 65/cholesterol/pluronic F -127 niosomes with vesicle size of 627.3 nm. The release study of proteins from the niosomal preparations in simulated gastric fluid (SGF) and simulated intestinal fluid (SIF) revealed that insulin and lysozyme efflux from the niosomes is a biphasic process. The results indicate that Span 65 niosomes could be developed as controlled release dosage forms for delivery of peptides and proteins such as insulin and lysozyme.

Formulation of Aluminum Chloride Phthalocyanine in Pluronic(™) P-123 and F-127 Block Copolymer Micelles: Photophysical properties and Photodynamic Inactivation of Microorganisms.

Aluminum Chloride Phthalocyanine (AlPcCl) can be used as a photosensitizer (PS) for Photodynamic Inactivation of Microorganisms (PDI). The AlPcCl showed favorable characteristics for PDI due to high quantum yield of singlet oxygen (ΦΔ ) and photostability. Physicochemical properties and photodynamic inactivation of AlPcCl incorporated in polymeric micelles of tri-block copolymer (P-123 and F-127) against microorganisms Staphylococcus aureus, Escherichia coli and Candida albicans were investigated in this work. Previously, it was observed that the AlPcCl undergoes self-aggregation in F-127, while in P-123 the PS is in a monomeric form suitable for PDI. Due to the self-aggregation of AlPcCl in F-127, this formulation did not show any effect on these microorganisms. On the other hand, AlPcCl formulated in P-123 was effective against S. aureus and C. albicans and the death of microorganisms was dependent on the PS concentration and illumination time. Additionally, it was found that the values of PS concentration and illumination time to eradicate 90% of the initial population of microorganisms (IC90 and D90 , respectively) were small for the AlPcCl in P-123, showing the effectiveness of this formulation for PDI.

Synthesis and characterization of PEPO grafted carboxymethyl guar and carboxymethyl tamarind as new thermo-associating polymers.

New thermo associating polymers were designed and synthesized by grafting amino terminated poly(ethylene oxide-co-propylene oxide) (PEPO) onto carboxymethyl guar (CMG) and carboxymethyl tamarind (CMT). The grafting was performed by coupling reaction between NH2 groups of PEPO and COOH groups of CMG and CMT using water-soluble EDC/NHS as coupling agents. The grafting efficiency and the temperature of thermo-association, T(assoc) in the copolymer were studied by NMR spectroscopy. The graft copolymers, CMG-g-PEPO and CMT-g-PEPO exhibited interesting thermo-associating behavior which was evidenced by the detailed rheological and fluorescence measurements. The visco-elastic properties (storage modulus, G'; loss modulus, G") of the copolymer solutions were investigated using oscillatory shear experiments. The influence of salt and surfactant on the T(assoc) was also studied by rheology, where the phenomenon of "Salting out" and "Salting in" was observed for salt and surfactant, respectively, which can give an easy access to tunable properties of these copolymers. These thermo-associating polymers with biodegradable nature of CMG and CMT can have potential applications as smart injectables in controlled release technology and as thickeners in cosmetics and pharmaceutical formulations.