[Bone remodeling after total hip arthroplasty with anatomic medullary locking prosthesis and its long-term effectiveness].

OBJECTIVE: To investigate the femoral bone remodeling and long-term effectiveness of total hip arthroplasty (THA) with anatomic medullary locking (AML) prosthesis. METHODS: The clinical data of 24 cases (26 hips) who were treated with THA with AML prosthesis between November 1997 and January 2003 were retrospectively analyzed. There were 12 males and 12 females with an age of 32-69 years (mean, 53.7 years). There were 5 cases (5 hips) of avascular necrosis of the femoral head, 6 cases (7 hips) of secondary osteoarthritis of the hip dysplasia, 6 cases (6 hips) of femoral neck fracture, 2 cases (2 hips) of primary osteoarthritis, 3 cases (3 hips) of revision surgery, 1 case (2 hips) of ankylosing spondylitis, 1 case (1 hip) of femoral head fracture. The patients were followed up at immediate, 6 weeks, 3 months, 6 months, 1 year, and then every year after operation for imaging evaluation (X-ray film was taken immediately after operation to evaluate the femoral isthmus compression, Engh standard was used to evaluate the biological fixation of the femoral shaft prosthesis, and Brooker method was used to evaluate the occurrence of heterotopic ossification); bone reconstruction evaluation [reconstruction of prosthesis and bone interface (type of bone reaction, Gruen zone, incidence, and occurrence time were recorded), reconstruction of bone around prosthesis (proximal femur stress shielding bone absorption was evaluated according to Engh and Bobyn methods, and bone mineral density change rate was measured)]; clinical efficacy evaluation [Harris score for efficacy, visual analogue scale (VAS) score for thigh pain]. RESULTS: All patients were followed up 15 years and 2 months to 20 years and 4 months, with a median of 16 years and 6 months. At immediate after operation, 24 hips (92.3%) had good femoral isthums compression, 24 hips (92.3%) had good bone ingrowth. Heterotopic ossification occurred in 2 patients with degree 1, 2 patients with degree 2, and 1 patient with degree 3 at 3-6 months after operation. Hyperplastic bone reactions were more common in Gruen 2, 3, 4, 5, 6, 10, 11, and 12 zones, mainly occurring at 6-20 months after operation, with the incidence of 3.8%-69.2%, with the highest incidence of spot welding. All absorptive bone reactions were osteolysis, which was common in Gruen 1 and 7 zones, and mainly occurred at 8 years after operation, with an incidence of 42.3%. No clear line (area) or enlarged sign of medullary cavity was observed. Twenty-one hips (80.8%) had 1 degree stress shieding, and 5 hips (19.2%) had 2 degree stress shieding. It mainly occurred at 10-24 months after operation in Gruen 1 and 7 zones. Dual energy X-ray absorptiometry showed that bone mineral density mainly decreased in Gruen 1, 2, 6, and 7 zones, mainly increased in Gruen 3, 4, and 5 zones. Bone mineral density loss progressed slowly after 2 years of operation, and it was stable in 5-8 years, but decreased rapidly in 8-9 years, and stabilized after 10 years. The Harris score increased from 51.1±6.2 before operation to 88.3±5.1 at last follow-up ( t=-21.774, P=0.000). Mild thigh pain occurred in only 2 cases (7.7%) with the VAS score of 2. No aseptic loosening or revision of femoral prosthesis occurred during the follow-up. CONCLUSION: The application of AML prosthesis in THA has a good bone remodeling and a good long-term effectiveness.

Does artificial aging correctly predict the long-term in-vivo degradation behavior in zirconia hip prostheses?

BACKGROUND: Accelerated hydrothermal aging has long been one of the most widely accepted quality control tests for simulating low-temperature degradation (LTD) in zirconia-containing implants used in total hip arthroplasty (THA). However, it is still unclear how much consistency there is between the experimental prediction from the internationally-standardized tests and the actual measurements from surgically-removed implants after a long period of implantation. This question is fundamentally related to a lack of understanding of mechanical/tribological contribution to the in-vivo LTD kinetics. OBJECTIVE: The main purpose of this study is to validate the clinical relevance of standardized accelerated aging by comparing artificially-aged and in-vivo used prostheses, and to clarify the long-term effects of in-vivo mechanics/tribology on the LTD progression upon service in the body environment. METHODS: Surface magnitudes of phase transformation and residual stress in zirconia femoral head retrievals (13.1-18.4 yrs) were evaluated by using confocal Raman microspectroscopy. RESULTS: The long-term aging behavior in unworn head surface was in agreement with the experimental prediction estimated as 1 h aging at 134 °C = 4 years in-vivo. However, the current aging protocols based on ASTM and ISO criteria were not accurately predictive for the worn surfaces, and the tribologically-induced phase transformation and tensile stress were up to 6.5-times and 3.3-times higher than the environmentally-induced ones. CONCLUSION: Our study suggests that wear/scratching, frictional heating, tribochemical reactions, and metal transfer may become far more intense triggers to phase transformation than the mere exposure to body fluid.

Effects of Daily Activities and Position on Kinematics and Contact Mechanics of Dual Mobility Hip Implant.

Dual mobility hip implants have been widely introduced to overcome dislocation in recent years. However, the potential influence of different gaits on kinematics and contact mechanics for dual mobility hip implants is still unclear. Furthermore, a large range of motion coupling with the implant position, especially high inclination or anteversion angle, may result in poor kinematics and contact mechanics. A previously developed dynamic finite element method was adopted in this study to examine the kinematics and corresponding stability of dual mobility hip implants under different gaits coupling with different inclinations or anteversion angles. The results showed only inner relative sliding under knee-bending for dual mobility hip implants under moderate inclination and anteversion angles, whereas an anteversion angle of 25° induced both impingement and consequent relative sliding of the outer articulation. However, the impingement (between the stem neck and the liner inner rim) indeed happened under stair-climbing and sitting-down/stand-up as well as combined movements when inclination and anteversion angles were set as 45° and 0°, respectively, and this finally led to relative sliding at the outer articulation. A high inclination angle did not worsen both the impingement and related outer sliding compared to modest inclination and anteversion angles of the liner, but a high anteversion angle prolonged the period of both the impingement and the outer relative sliding. The extreme motions and high anteversion angles are hardly inevitable, and they indeed lead to motions at both articulations for dual mobility hip implants.

A simple angle-measuring instrument for measuring cemented stem anteversion during total hip arthroplasty.

BACKGROUND: During total hip arthroplasty (THA), the accurate placement of the femoral components is an important determinant of the success of the procedure. This study assessed the accuracy of cemented stem placement using a new angle-measuring instrument. The primary objective was to investigate the accuracy of the intraoperative measurements of cemented stem anteversion obtained using the angle-measuring instrument. Our secondary objective was to evaluate the accuracy of stem positioning performed using the angle-measuring instrument. METHODS: We compared the intraoperative stem anteversion measurements obtained using the angle-measuring instrument with postoperative stem anteversion measurements obtained using computed tomography in 149 hips (measurement accuracy). We also compared the target angle and postoperative stem anteversion in 105 hips (implantation accuracy). RESULTS: The mean amount of intraoperative stem anteversion was 37.9° ± 10.1°, and the mean amount of postoperative stem anteversion was 37.0° ± 10.4°. The mean measurement accuracy was 0.9° ± 6.1°, and the absolute measurement accuracy was 4.9° ± 3.7°. The correlation coefficient for the relationship between the intraoperative and postoperative stem anteversion measurements was 0.824 (p = 0.000). The mean amount of target angle was 37.4° ± 7.6°, and the mean amount of postoperative stem anteversion was 35.9° ± 9.1°. The mean implantation accuracy was 1.4° ± 5.6°, and the mean absolute implantation accuracy was 4.3° ± 3.6°. The correlation coefficient for the relationship between the target angle and postoperative stem anteversion was 0.795 (p = 0.000). CONCLUSIONS: The angle-measuring instrument measured intraoperative stem anteversion accurately, and cemented stem was implanted accurately during THA with the angle-measuring instrument.

Polyethylene manufacturing characteristics have a major effect on the risk of revision surgery in cementless and hybrid total hip arthroplasties.

AIMS: The aim of this study was to identify the effect of the manufacturing characteristics of polyethylene acetabular liners on the survival of cementless and hybrid total hip arthroplasty (THA). METHODS: Prospective cohort study using linked National Joint Registry (NJR) and manufacturer data. The primary endpoint was revision for aseptic loosening. Cox proportional hazard regression was the primary analytical approach. Manufacturing variables included resin type, crosslinking radiation dose, terminal sterilization method, terminal sterilization radiation dose, stabilization treatment, total radiation dose, packaging, and face asymmetry. Total radiation dose was further divided into G1 (no radiation), G2 (> 0 Mrad to < 5 Mrad), G3 (≥ 5 Mrad to < 10 Mrad), and G4 (≥ 10 Mrad). RESULTS: A total of 5,329 THAs were revised, 1,290 of which were due to aseptic loosening. Total radiation dose, face asymmetry, and stabilization treatments were found to significantly affect implant survival. G1 had the highest revision risk for any reason and for aseptic loosening and G3 and G4 the lowest. Compared with G1, the adjusted hazard ratio for G2 was 0.74 (95% confidence interval (CI) 0.64 to 0.86), G3 was 0.36 (95% CI 0.30 to 0.43), and G4 was 0.38 (95% CI 0.31 to 0.47). The cumulative incidence of revision for aseptic loosening at 12 years was 0.52 and 0.54 per 100 THAs for G3 and G4, respectively, compared with 1.95 per 100 THAs in G1. Asymmetrical liners had a lower revision risk due to aseptic loosening and reasons other than aseptic loosening compared with symmetric (flat) liners. In G3 and G4, stabilization with vitamin E and heating above melting point performed best. CONCLUSION: Polyethylene liners with a total radiation dose of ≥ 5 Mrad, an asymmetrical liner face, and stabilization with heating above the melting point demonstrate best survival. Cite this article: Bone Joint J 2020;102-B(1):90-101.

Two Different Methods to Measure the Stability of Acetabular Implants: A Comparison Using Artificial Acetabular Models.

The total number of total hip arthroplasties is increasing every year, and approximately 10% of these surgeries are revisions. New implant design and surgical techniques are evolving quickly and demand accurate preclinical evaluation. The initial stability of cementless implants is one of the main concerns of these preclinical evaluations. A broad range of initial stability test methods is currently used, which can be categorized into two main groups: Load-to-failure tests and relative micromotion measurements. Measuring relative micromotion between implant and bone is recognized as the golden standard for implant stability testing as this micromotion is directly linked to the long-term fixation of cementless implants. However, specific custom-made set-ups are required to measure this micromotion, with the result that numerous studies opt to perform more straightforward load-to-failure tests. A custom-made micromotion test set-up for artificial acetabular bone models was developed and used to compare load-to-failure (implant push-out test) with micromotion and to assess the influence of bone material properties and press-fit on the implant stability. The results showed a high degree of correlation between micromotion and load-to-failure stability metrics, which indicates that load-to-failure stability tests can be an appropriate estimator of the primary stability of acetabular implants. Nevertheless, micromotions still apply as the golden standard and are preferred when high accuracy is necessary. Higher bone density resulted in an increase in implant stability. An increase of press-fit from 0.7 mm to 1.2 mm did not significantly increase implant stability.

Three-dimensional technology assisted trabecular metal cup and augments positioning in revision total hip arthroplasty with complex acetabular defects.

BACKGROUND: Revision total hip arthroplasty (THA) with large acetabular defect remains a challenge. Though trabecular metal (TM) cup and augments have been introduced in defect reconstruction with good result, the accurate positioning of implant is important to avoid complications. Therefore, we aimed to evaluate the usefulness of three-dimensional (3D) simulation and 3D model in assisting implant positioning during complex revision THA. METHODS: Sixteen patients (18 hips) who underwent revision THA with a Paprosky type III acetabular defect were analyzed retrospectively. Placement of acetabular cup and TM augments was simulated with 3D simulation software and 3D model preoperatively. Cup anteversion, abduction angle, and hip center were measured in each case preoperatively and postoperatively. Primary outcome was the percentage of outliers according to Lewinnek safe zone and Harris hip score (HHS). Secondary outcome was the correlation between the 3D planned and the postoperative value. RESULTS: The percentage of outliers was significantly corrected from 77.78% (14/18) preoperatively to 38.88% (7/18) postoperatively (p = 0.04). There was a significant correlation between mean planned cup anteversion and postoperative value (13.39 vs 11.99, r = 0.894; p < 0.001). There was a significant correlation between mean planned abduction and postoperative value (42.67 vs 44.91, r = 0.921, p < 0.001). The number of planned and used augments was the same in all the cases. In 15 cases (83.33%), the size of planned and used TM augments was the same. The HHS was significantly improved at final follow-up (80.94 vs 27.50, p < 0.001). No cases presented dislocation or radiological signs of loosening. CONCLUSION: Preoperative 3D simulation and model were considered the useful method to assist implant positioning in revision THA with complex acetabular defect, with moderate to high accuracy and satisfied clinical outcome.

A novel positioner for accurately sitting the acetabular component: a retrospective comparative study.

INTRODUCTION: In this study, we described a positioner which allows a combination of preoperative plan and intraoperative insertion of the cup to improve the reconstruction of the rotation center of the hip. MATERIALS AND METHODS: A retrospective study was conducted on 32 consecutive patients (group A) using this positioner and 40 consecutive patients (group B) using conventional method; radiological parameters and clinical measurements before operation and at last follow-up were collected and evaluated. RESULTS: Group A had a reconstructed center of rotation (COR) that was 0.19 mm closer to the anatomic COR in height (P < 0.005), compared with group B with 3.45 mm vertical dislocation. There were no statistically significant differences in the horizontal displacement between the two groups. The accuracy of cup inclination was 42.14 ± 3.57 in the group A and 38.73 ± 7.65 in the group B (P = 0.015). The accuracy of cup anteversion was 14.82 ± 1.44 in the group A and 13.08 ± 5.95 in the group B (P = 0.082). All cups in the group A were radiologically stable, while one cup in the group B was radiologically unstable and was successfully treated with second-stage revision. Both of the groups obtained a higher mean postoperative Harris Hip Score. CONCLUSIONS: Utilizing this positioner helps to restore the COR position more precisely and provides satisfactory radiological and clinical outcomes in the short term, and more studies are required before its widespread adoption for complicated cases.

A traditional hip implant is as effective as newer types for people over 65.

The studyFawsitt C, Thom H, Hunt L. Choice of prosthetic implant combinations in total hip replacement: cost-effectiveness analysis using UK and Swedish hip joint registries data. Value Health 2019;22:303-12.This study was funded by the NIHR Research for Patient Benefit Programme (project number PB-PG-0613-31032).To read the full NIHR Signal, go to https://discover.dc.nihr.ac.uk/content/signal-000771/a-traditional-hip-implant-is-as-effective-as-more-expensive-newer-types-for-older-people.

Mid-term progressive loosening of hydroxyapatite-coated femoral stems paired with a metal-on-metal bearing.

BACKGROUND: Several hydroxyapatite (HA)-coated femoral stems from a single manufacturer were identified to have aseptically loosened at mid-term follow-up despite prior radiographic appearance of osseointegration. Possible causes and associated risk factors for stem loosening were explored through radiographic review and implant retrieval analysis. METHODS: Forty-six retrieved hip stems (Corail, DePuy-Synthes) were identified and grouped by bearing type: metal-on-metal (MoM), metal-on-polyethylene, and ceramic-on-ceramic. Stem lucency was graded on post-operative radiographs up to the time of revision. Stems were examined for stripping of the HA coating, taper corrosion, and bearing wear in metal-on-metal cases. Patient demographics, implant design features, and perioperative data were collected from electronic databases and patient charts. RESULTS: Aseptic loosening occurred in 37% of cases examined. MoM bearings were associated with 7.25 times greater risk of loosening compared to other bearing types. Stem radiolucency was more prevalent for MoM cases and, although not statistically significant, demonstrated progressive lucency. Taper corrosion appeared more severe for MoM cases and correlated with proximal stem radiolucency. Removal of the HA coating from the stems was associated with both taper corrosion and MoM bearing wear. Length of implantation was a confounding factor for the MoM cases. CONCLUSION: This study has demonstrated a high risk of mid-term loosening of previously osseointegrated HA-coated femoral stems when paired with a MoM bearing. The mechanism of loosening appears progressive in nature and related to the MoM bearing, possibly interacting with the HA coating. If such loosening is recognized early, rapid revision may allow for retention of the femoral stem.

Mid-Term Results of Modular Tapered Femoral Stems in Revision Total Hip Arthroplasty.

BACKGROUND: In revision total hip arthroplasty (THA), modular femoral components aid the surgeon in reconstructing joints compromised by loss of bone and soft-tissue integrity, providing customization to address bony deficits, deformity, limb length, and offset challenges. The purpose of this study was to review the survival and outcomes at minimum five-year follow up of patients who underwent revision THA at our center with a single modular femoral revision hip system offering a wide range of proximal body and distal stem geometries and sizing options. MATERIALS AND METHODS: A query of our practice arthroplasty registry revealed 66 consented patients (69 hips) who underwent revision THA using a modular femoral stem between December 2009 and July 2013 with minimum five-year follow up. There were 35 men (53%) and 31 women (47%). Mean age was 65.2 years (range, 36-87). Etiology for index revision was 32 aseptic loosening, 20 infection, nine periprosthetic fracture, three nonunion of internal fixation, three instability, one stem breakage, and one metal complication. RESULTS: Mean follow up was 6.3 years (range, 5-9). Harris Hip Scores improved from a mean of 45.4 preoperatively to 72.0 at most recent evaluations. There have been four re-revisions of the femoral stem: one infection, two periprosthetic femoral fracture, and one (proximal segment only) for instability. Radiographic assessment revealed satisfactory position, fixation, and alignment in all hips. Radiographic subsidence of 6-10mm occurred in four (none revised), and none had subsidence > 10mm. There were no modular junction failures. Kaplan-Meier survival to endpoint of femoral revision was 93.3% (95% CI ±3.3%) at 8.7 years. CONCLUSIONS: The minimum five-year results of this modular THA revision system are promising, with low rates of aseptic failure, minimal subsidence, and no modular junction failures. While there may be roles for the use of non-modular revision stems, the mid-term clinical results in this cohort of patients was found to be acceptable.

The 10-year outcomes of the ASR XL Acetabular System: a single-center experience from China.

BACKGROUND: The revision rate of articular surface replacement (ASR) implants continues to rise in China because of metal debris. However, there are few reports on the clinical results of ASR implants with prolonged follow-up time in China. This study investigated the clinical outcomes and the risk factors of revision surgery in patients with ASR implants. METHODS: In total, 74 patients (74 hips) who underwent primary total hip arthroplasty (THA) with ASR implants over the past 4 to 10 years were retrospectively analyzed. Relevant clinical, radiographic, and biochemical data were examined. RESULTS: The average follow-up time was 88.46 (range 23-114) months, and the ASR implants of 18 hips (24.3%) were revised. Patients who received revision surgery had worse joint function with significantly lower Harris Hip Score and Western Ontario and McMaster Universities index than non-revision patients (61.11 ± 6.68 vs 85.30 ± 9.16, p < 0.001; 61.00 ± 3.83 vs 79.04 ± 14.49, p < 0.001; respectively). Higher acetabular abduction angle and serum Co and Cr concentration were significantly relevant to worse joint function as measured by HSS (p = 0.018, 0.009, 0.043, respectively). ROC curve analysis was applied to categorize the optimal cutoff values of acetabular abduction angle and serum Cr and Co concentration for revision surgery, which were settled as 47.80°, 98.44 µg/L, and 6.95 µg/L, respectively. Overall survival of the prostheses with high acetabular abduction angle (> 47.80°, HR = 70.145, 95% CI 1.558-3158.213, p = 0.029), high serum Cr concentration (98.44 µg/L, HR = 58.956, 95% CI 1.294-2685.203, p = 0.036), and high serum Co concentration (> 6.95 µg/L, HR = 179.511, 95% CI 2.360-13656.941, p = 0.019) decreased significantly than the lower groups. CONCLUSIONS: Evaluation of the DePuy ASR XL articulation demonstrated increased rates of revision following a longer follow-up period. High acetabular abduction angle and serum Cr and Co concentration correlated with worse clinical outcomes and high revision rate. Therefore, we advocate that patients with DePuy ASR XL implants be followed up more closely than those with other implants, especially with high acetabular abduction angle and serum Cr or Co concentration.

Assessing the non-inferiority of prosthesis constructs used in hip replacement using data from the National Joint Registry of England, Wales, Northern Ireland and the Isle of Man: a benchmarking study.

OBJECTIVES: To investigate the relative performance of hip prosthesis constructs as compared with the best performing prosthesis constructs and illustrate the substantial variability in performance of currently used prostheses. DESIGN: A non-inferiority study. SETTING: The National Joint Registry for England, Wales, Northern Ireland and the Isle of Man (NJR). PARTICIPANTS: All patients with a primary total hip replacement registered in the NJR between 1 April 2003 and 31 December 2016. MAIN OUTCOME MEASURES: Kaplan-Meier failure function for hip prosthesis constructs. Failure difference between best performing construct and remaining constructs. METHODS: Using a non-inferiority analysis, the performance of hip prosthesis constructs by brand were compared with the best performing contemporary construct. Construct failure was estimated using the 1-Kaplan-Meier survival function method, that is, an estimate of net failure. The difference in failure between the contemporary benchmark and all other constructs was tested. RESULTS: Of the 4442 constructs used, only 134 had ≥500 procedures at risk at 3 years postprimary, 89 of which were not demonstrated to be inferior to the benchmark by at least 100% relative risk. By 10 years postprimary, there were 26 constructs with ≥500 at risk, 13 of which were not demonstrated to be inferior by at least 20% relative risk.Even fewer constructs were not inferior to the benchmark when analysed by age and gender. At 5 years postprimary, there were 15 constructs in males and 11 in females, aged 55-75 years, not shown to be inferior. CONCLUSIONS: There is great variability in construct performance and the majority of constructs have not been demonstrated to be non-inferior to contemporary benchmarks. These results can help to inform patients, clinicians and commissioners when considering hip replacement surgery.

Prospective 5-year study with 96 short curved Fitmore™ hip stems shows a high incidence of cortical hypertrophy with no clinical relevance.

BACKGROUND: An increased occurrence of cortical hypertrophy (CH) was observed 1-2 years after implanting short curved Fitmore hip stems. There are no published data about either the clinical relevance or the progression of CH over the long term. METHODS: Ninety-six primary total hip arthroplasties were performed between 2008 and 2010 using the Fitmore hip stem. Clinical and radiological parameters were recorded preoperatively and at 1, 2, 3, and 5 year follow-up. RESULTS: CH appeared mainly on antero-posterior radiographs in Gruen Zones 2, 3, 5, and 6. After 1 year, the diameter was 10 ± 2 mm and remained constant thereafter. The CH rate after 1 year was 69% and after 5 years 71%. Subsidence after 1 year was 1.6 ± 1.55 mm and 1.93 ± 1.72 mm after 5 years. Cortical thinning was 46% after 1 year and 56% after 5 years, mainly in Gruen Zones 7 and 8. In the first year radiolucencies were found in 51% in all Gruen Zones, and in 20% after 5 years. Patient, implant, and surgical factors did not correlate with radiological outcomes except that larger stems had more CH. After 5 years, the Harris Hip Score had improved from 59 to 94 and the Oxford Hip Score from 22 to 41. Radiographic parameters, notably CH, were not associated with clinical outcomes except that cortical thinning correlated with lower outcome scores. CONCLUSIONS: CH correlated neither with clinical outcome nor with patient, surgical or implant factors, except for a positive correlation with stem size. The Fitmore hip stems settled within the first year to a stable fixation and then remained almost unchanged. However, cortical thinning is common in Gruen Zone 7 and 8 meaning that there is stress-shielding.

An international comparison of THA patients, implants, techniques, and survivorship in Sweden, Australia, and the United States.

Background and purpose - International comparisons of total hip arthroplasty (THA) practices and outcomes provide an opportunity to enhance the quality of care worldwide. We compared THA patients, implants, techniques, and survivorship in Sweden, Australia, and the United States. Patients and methods - Primary THAs due to osteoarthritis were identified using Swedish (n = 159,695), Australian (n = 279,693), and US registries (n = 69,641) (2003-2015). We compared patients, practices, and implant usage across the countries using descriptive statistics. We evaluated time to all-cause revision using Kaplan-Meier survival curves. We assessed differences in countries' THA survival using chi-square tests of survival probabilities. Results - Sweden had fewer comorbidities than the United States and Australia. Cement fixation was used predominantly in Sweden and cementless in the United States and Australia. The direct anterior approach was used more frequently in the United States and Australia. Smaller head sizes (≤ 32 mm vs. ≥ 36 mm) were used more often in Sweden than the United States and Australia. Metal-on-highly cross-linked polyethylene was used more frequently in the United States and Australia than in Sweden. Sweden's 5- (97.8%) and 10-year THA survival (95.8%) was higher than the United States' (5-year: 97.0%; 10-year: 95.2%) and Australia (5-year: 96.3%; 10-year: 93.5%). Interpretation - Patient characteristics, surgical techniques, and implants differed across the 3 countries, emphasizing the need to adjust for demographics, surgical techniques, and implants and the need for global standardized definitions to compare THA survivorship internationally.

The design of the cemented stem influences the risk of Vancouver type B fractures, but not of type C: an analysis of 82,837 Lubinus SPII and Exeter Polished stems.

Background and purpose - In total hip replacements, stem design may affect the occurrence of periprosthetic femoral fracture. We studied risk factors for fractures around and distal to the 2 most used cemented femoral stems in Sweden. Patients and methods - This is a register study including all standard primary Lubinus SPII and Exeter Polished stems operated in Sweden between 2001 and 2009. The outcome was any kind of reoperation due to fracture around (Vancouver type B) or distal to the stem (Vancouver type C), with use of age, sex, diagnosis at primary THR, and year of index operation as covariates in a Cox regression analysis. A separate analysis of the primary osteoarthritis patient group was done in order to evaluate eventual influence of the surgical approach (lateral versus posterior) on the risk for Vancouver type B fractures. Results - The Exeter stem had a 10-times (95% CI 7-13) higher risk for type B fractures, compared with the Lubinus, while no statistically significant difference was noticed for type C fractures. The elderly, and patients with hip fracture or idiopathic femoral head necrosis, had a higher risk for both fracture types. Inflammatory arthritis was a risk factor only for type C fractures. Type B fractures were more common in men, and type C in women. A lateral approach was associated with decreased risk for Type B fracture. Interpretation - Stem design influenced the risk for type B, but not for type C fracture. The influence of surgical approach on the risk for periprosthetic femoral fracture should be studied further.

Low Revision Rates at 10 years for Metal on Metal Hip Implants in a Military Population.

INTRODUCTION: Prior to being largely abandoned due to unacceptably high failure rates and the adverse physiologic reactions to metal ions, metal-on-metal (MoM) total hip arthroplasty (THA) and hip resurfacing (HR) were in widespread use throughout the USA, and the potential benefit of decreased volumetric wear rates made it of particular interest to those who serve a young active population, such as military surgeons. The aim of our study was to determine the revision rate of metal on metal hip implants performed at our military institution and obtain current patient reported outcomes from this cohort. MATERIALS AND METHODS: We conducted a retrospective review of patients who underwent MoM total hip arthroplasty (THA) or hip resurfacing (HR) at our institution from 2006 to 2012. Revision status and component type were determined, and patients were contacted to obtain current HOOS JR scores. RESULTS: We identified 103 THAs in 88 patients and 38 HRs in 33 patients, with mean follow up of 10.2 years. Average age at time of surgery was 48 years, and 85% of the patients were male. The mean HOOS JR score in the THA and HR groups were 84.9 ± 17.6 and 75.8 ± 24.9, respectively (p = 0.38), and were not significantly lower in those who were revised. Two THA revisions occurred for metallosis and one for aseptic loosening of the femoral component. One HR revision occurred for breach of the anterior femoral neck, and one occurred for heterotopicossification. CONCLUSIONS: Revision rates of MoM THA and HR in this young, predominantly male population were 2.9% and 5.3%, respectively, and patients maintained generally good hip-specific outcomes.

Patient-specific design process and evaluation of a hip prosthesis femoral stem.

INTRODUCTION: There are several commercially available hip implant systems. However, for some cases, custom implant designed based on patient-specific anatomy can offer the patient the best available implant solution. Currently, there is a growing trend toward personalization of medical implants involving additive manufacturing into orthopedic medical implants' manufacturing. METHODS: This article introduces a systematic design methodology of femoral stem prosthesis based on patient's computer tomography data. Finite element analysis is used to evaluate and compare the micromotion and stress distribution of the customized femoral component and a conventional stem. RESULTS: The proposed customized femoral stem achieved close geometrical fit and fill between femoral canal and stem surfaces. The customized stem demonstrated lower micromotion (peak: 21 µm) than conventional stem (peak: 34 µm). Stress results indicate up to 89% increase in load transfer by conventional stem than custom stem because the higher stiffness of patient-specific femoral stem proximally increases the custom stem shielding in Gruen's zone 7. Moreover, patient-specific femoral stem transfers the load widely in metaphyseal region. CONCLUSION: The customized femoral stem presented satisfactory results related to primary stability, but compromising proximo-medial load transfer due to increased stem cross-sectional area increased stem stiffness.