Force-controlled release of small molecules with a rotaxane actuator.

Force-controlled release of small molecules offers great promise for the delivery of drugs and the release of healing or reporting agents in a medical or materials context1-3. In polymer mechanochemistry, polymers are used as actuators to stretch mechanosensitive molecules (mechanophores)4. This technique has enabled the release of molecular cargo by rearrangement, as a direct5,6 or indirect7-10 consequence of bond scission in a mechanophore, or by dissociation of cage11, supramolecular12 or metal complexes13,14, and even by 'flex activation'15,16. However, the systems described so far are limited in the diversity and/or quantity of the molecules released per stretching event1,2. This is due to the difficulty in iteratively activating scissile mechanophores, as the actuating polymers will dissociate after the first activation. Physical encapsulation strategies can be used to deliver a larger cargo load, but these are often subject to non-specific (that is, non-mechanical) release3. Here we show that a rotaxane (an interlocked molecule in which a macrocycle is trapped on a stoppered axle) acts as an efficient actuator to trigger the release of cargo molecules appended to its axle. The release of up to five cargo molecules per rotaxane actuator was demonstrated in solution, by ultrasonication, and in bulk, by compression, achieving a release efficiency of up to 71% and 30%, respectively, which places this rotaxane device among the most efficient release systems achieved so far1. We also demonstrate the release of three representative functional molecules (a drug, a fluorescent tag and an organocatalyst), and we anticipate that a large variety of cargo molecules could be released with this device. This rotaxane actuator provides a versatile platform for various force-controlled release applications.

Preparation of External Stimulus-Free Gelatin-Catechol Hydrogels with Injectability and Tunable Temperature Responsiveness.

Gelatin is one of the most versatile biopolymers in various biomedical applications. A gelatin derivative gelatin-catechol (Gel-C) was developed in this study to further optimize its chemical and physical properties such as thermal reversibility and injectability. We found that Gel-C remains in a solution state at room temperature, and the temperature-dependent gelation capability of gelatin is well preserved in Gel-C. Its gel-forming temperature decreased to about 10 °C (about 30 °C for gelatin), and a series of gelatin derivatives with different gel-forming temperatures (10-30 °C) were formed by mixing gelatin and Gel-C in different ratios. Additionally, irreversible Gel-C hydrogels could be made without the addition of external stimuli by combining the physical cross-linking of gelatin and the chemical cross-linking of catechol. At the same time, properties of Gel-C hydrogels such as thermal reversibility and injectability could be manipulated by controlling the temperature and pH of the precursor solution. By simulating the formation of an irreversible Gel-C hydrogel in vivo, an in situ gelling system was fabricated by lowering the local temperature of the hydrogel with cold shock, thus realizing targeted and localized molecular delivery with prolonged retention time. This simple system integrated with the temperature responsiveness of gelatin and chemical cross-linking of catechol groups thus provides a promising platform to fabricate an in situ gelling system for drug delivery.

Synthesis, classification and properties of hydrogels: their applications in drug delivery and agriculture.

Absorbent polymers or hydrogel polymer materials have an enhanced water retention capacity and are widely used in agriculture and medicine. The controlled release of bioactive molecules (especially drug proteins) by hydrogels and the encapsulation of living cells are some of the active areas of drug discovery research. Hydrogel-based delivery systems may result in a therapeutically advantageous outcome for drug delivery. They can provide various sequential therapeutic agents including macromolecular drugs, small molecule drugs, and cells to control the release of molecules. Due to their controllable degradability, ability to protect unstable drugs from degradation and flexible physical properties, hydrogels can be used as a platform in which various chemical and physical interactions with encapsulated drugs for controlled release in the system can be studied. Practically, hydrogels that possess biodegradable properties have aroused greater interest in drug delivery systems. The original three-dimensional structure gets broken down into non-toxic substances, thus confirming the excellent biocompatibility of the gel. Chemical crosslinking is a resource-rich method for forming hydrogels with excellent mechanical strength. But in some cases the crosslinker used in the synthesis of the hydrogels may cause some toxicity. However, the physically cross-linked hydrogel preparative method is an alternative solution to overcome the toxicity of cross-linkers. Hydrogels that are responsive to stimuli formed from various natural and synthetic polymers can show significant changes in their properties under external stimuli such as temperature, pH, light, ion changes, and redox potential. Stimulus-responsive hydrogels have a wider range of applications in biomedicine including drug delivery, gene delivery and tissue regeneration. Stimulus-responsive hydrogels loaded with multiple drugs show controlled and sustained drug release and can act as drug carriers. By integrating stimulus-responsive hydrogels, such as those with improved thermal responsiveness, pH responsiveness and dual responsiveness, into textile materials, advanced functions can be imparted to the textile materials, thereby improving the moisture and water retention performance, environmental responsiveness, aesthetic appeal, display and comfort of textiles. This review explores the stimuli-responsive hydrogels in drug delivery systems and examines super adsorbent hydrogels and their application in the field of agriculture.

Injectable Micelle-Incorporated Hydrogels for the Localized Chemo-Immunotherapy of Breast Tumors.

Although immune checkpoint blockade (ICB) holds potential for the treatment of various tumors, a considerable proportion of patients show a limited response to ICB therapy due to the low immunogenicity of a variety of tumors. It has been shown that some chemotherapeutics can turn low-immunogenic tumors into immunogenic phenotypes by inducing a cascade of immune responses. In this paper, we synthesized an injectable micelle-incorporated hydrogel, which was able to sequentially release the chemotherapeutic gemcitabine (GEM) and the hydrophobic indoleamine 2, 3-dioxygenase inhibitor, d-1-methyltryptophan (d-1MT) at tumor sites. The hydrogel was formed via the thiol-ene click reaction between the thiolated chondroitin sulfate and the micelle formed by amphiphilic methacrylated Pluronic F127, in which hydrophobic d-1MT was encapsulated in the core of the F127 micelles and the hydrophilic GEM was dispersed in the hydrogel network. The successive release of chemotherapeutics and immune checkpoint inhibitors at tumor tissues will first promote the infiltration of cytotoxic T lymphocytes and subsequently induce a robust antitumor immune response, ultimately exerting a synergetic therapeutic efficacy. In a 4T1 tumor-bearing mice model, our results showed that the combination of chemotherapy and immunotherapy through the micelle-incorporated hydrogel triggered an effective antitumor immune response and inhibited tumor metastasis to the lung. Our results highlight the potential of the injectable micelle-incorporated hydrogel for the localized chemo-immunotherapy in the treatment of breast tumors.

ROS-Responsive Selenium-Containing Carriers for Coencapsulation of Photosensitizer and Hypoxia-Activated Prodrug and Their Cellular Behaviors.

The integration of hypoxia-activated chemotherapy with photodynamic therapy (PDT) has newly become a potent strategy for tumor treatment. Herein, a reactive oxygen species (ROS)-responsive drug carriers (PS@AQ4N/mPEG-b-PSe NPs) are fabricated based on the amphiphilic selenium-containing methoxy poly(ethylene glycol)-polycarbonate (mPEG-b-PSe), the hydrophobic photosensitizer (PS), and hypoxia-activated prodrug Banoxantrone (AQ4N). The obtained nanoparticles are spherical with an average diameter of 100 nm as characterized by transmission electron microscope (TEM) and dynamic laser scattering (DLS) respectively. The encapsulation efficiency of the PS and AQ4N reaches 92.83% and 51.04% at different conditions, respectively, by UV-vis spectrophotometer. It is found that the drug release is accelerated due to the good ROS responsiveness of mPEG-b-PSe and the cumulative release of AQ4N is up to 89% within 30 h. The cell test demonstrates that the nanoparticles dissociate when triggered by the ROS stimuli in the cancer cells, thus the PS is exposed to more oxygen and the ROS generation efficiency is enhanced accordingly. The consumption of oxygen during PDT leads to the increased tumor hypoxia, and subsequently activates AQ4N into cytotoxic counterpart to inhibit tumor growth. Therefore, the synergistic therapeutic efficacy demonstrates this drug delivery has great potential for antitumor therapy.

3D printing and enteric coating of a hollow capsular device with controlled drug release characteristics prepared using extruded Eudragit® filaments.

This work focuses on the extrusion of a brittle, tacky, cationic copolymer i.e. Eudragit® E-100 to prepare filament and subsequent 3D printing of hollow capsular device using the extruded filament. An optimum amount of talc and triethyl citrate was used for the possible extrusion of the polymer. There was no thermal and chemical degradation of the polymer observed after extrusion confirmed by DSC and FTIR analysis. Microscopic analysis of the printed capsule showed the layer-by-layer manner of 3D printing. Capsule parts were printed according to the set dimensions (00 size) with minimal deviation. Printed capsule showed the soluble behaviour in gastric fluid pH 1.2 where within 15 min the encapsulated drug encounters with the dissolution medium and almost 70% drug was dissolved within 4 hr. In case of phosphate buffer pH 6.8, the printed capsule showed a longed swelling behaviour up to 12 hr and then gradually bursting of capsule occurred wherein more than 90% encapsulated drug was dissolved within 36 hr. Enteric coating of the printed capsule showed similar behaviour in alkaline medium that observed with non-enteric capsule. This indicates the potential application of this printed capsules for both gastric and intestinal specific delayed drug delivery by a single step enteric coating process.

Formulation development and in-vitro evaluation of gastroretentive drug delivery system of loxoprofen sodium: A natural excipients based approach.

The limitations of conventional type delivery systems to retain drug (s) in the stomach has resulted in the development of novel gastroretentive drug delivery system. We developed single-layer effervescent floating tablets of loxoprofen sodium for prolong delivery in the stomach using natural polymers xanthan gum, guar gum and semisynthetic polymer HPMCK4M. All the formulations (F1-F9) were developed by varying concentrations of xanthan gum and HPMCK4M while guar gum concentration was kept constant. Two gas generating agent (s) incorporated were sodium bicarbonate and citric acid. All compendial pre and post-compression tests results were in the acceptable limits. FTIR analysis confirmed drug-polymer compatibility. The in-vitro drug release in simulated conditions i.e., 0.1 N HCl for 12 h revealed orderly increase in total floating time, i.e., less than 6 h for F1 over 12 h for F9. Formulations F1 to F4 were not capable to retard drug release up to 12 h, whereas F5-F7 for 12 h, while F8 and F9 for more than 12 h. Data fitting in various kinetic models showed that drug release best fit in first order kinetic model and F9 in zero order. Based on results data, F7 was the best among all.

Efficient Design to Monitor the Site-specific Sustained Release of a Non-Emissive Anticancer Drug.

A pH-responsive smart nanocarrier with significant components was synthesized by conjugating the non-emissive anticancer drug methyl orange and polyethylene glycol derived folate moiety to the backbone of polynorbornene. Complete synthesis procedure and characterization methods of three monomers included in the work: norbornene-derived Chlorambucil (Monomer 1), norbornene grafted with polyethylene glycol, and folic acid (Monomer 2) and norbornene attached methyl orange (Monomer 3) connected to the norbornene backbone through ester linkage were clearly discussed. Finally, the random copolymer CHO PEG FOL METH was synthesized by ring-opening metathesis polymerization (ROMP) using Grubbs' second-generation catalyst. Advanced polymer chromatography (APC) was used to find the final polymer's molecular weight and polydispersity index (PDI). Dynamic light scattering, scanning electron microscopy (SEM), and transmission electron microscopy (TEM) were utilized to explore the prodrug's size and morphology. Release experiments of the anticancer drug, Chlorambucil and the coloring agent, methyl orange, were performed at different pH and time. Cell viability assay was carried out for determining the rate of survived cells, followed by the treatment of our final polymer named CHO PEG FOL METH.

Design and In Vitro Evaluation of a Slow-Release Intraocular Implant of Betamethasone.

Posterior eye diseases are a common cause of vision problems in developing countries, which have encouraged the development of new treatment models for these degenerative diseases. Intraocular implants are one of the drug delivery systems to the posterior region of the eye. Using these implants, the blood-eye barrier can be bypassed; the complications caused by repeated in vitro administrations can be eliminated, and smaller amounts of the drug would be used during the treatment process. Meanwhile, biodegradable implants have received more attention due to their biodegradable structure and the lack of need for re-surgery to remove the rest of the system from the eye. The aim of this study is to employ biodegradable implants composed of polyethylene glycol (PEG) and 3-hydroxybutyrate-co-3-hydroxyvalerat (PHBV) to deliver betamethasone to the back of the eye in the treatment of retinopathy. PHBV polymer has been selected as the main polymer with a certain ratio of drug to polymer for fabrication of enamel and different amounts of PEG with three molecular weights used as pore generators to control drug release over a period of time. Based on the analysis of the results of differential scanning calorimetry (DSC) and FTIR spectroscopy, none of the polymers were degraded in the temperature range of the manufacturing process, and among betamethasone derivatives, the best option for implant preparation is the use of its basic form. Drug release studies over a period of three months showed that implants containing PHBV HV2% and PEG 6000 had a more appropriate release profile.

Process Optimization for the Continuous Production of a Gastroretentive Dosage Form Based on Melt Foaming.

Several drugs have poor oral bioavailability due to low or incomplete absorption which is affected by various effects as pH, motility of GI, and enzyme activity. The gastroretentive drug delivery systems are able to deal with these problems by prolonging the gastric residence time, while increasing the therapeutic efficacy of drugs. Previously, we developed a novel technology to foam hot and molten dispersions on atmospheric pressure by a batch-type in-house apparatus. Our aim was to upgrade this technology by a new continuous lab-scale apparatus and confirm that our formulations are gastroretentive. At first, we designed and built the apparatus and continuous production was optimized using a Box-Behnken experimental design. Then, we formulated barium sulfate-loaded samples with the optimal production parameters, which was suitable for in vivo imaging analysis. In vitro study proved the low density, namely 507 mg/cm3, and the microCT record showed high porosity with 40 µm average size of bubbles in the molten suspension. The BaSO4-loaded samples showed hard structure at room temperature and during the wetting test, the complete wetting was detected after 120 min. During the in vivo study, the X-ray taken showed the retention of the formulation in the rat stomach after 2 h. We can conclude that with our device low-density floating formulations were prepared with prolonged gastric residence time. This study provides a promising platform for marketed active ingredients with low bioavailability.

Fluvastatin-Loaded Emulsomes Exhibit Improved Cytotoxic and Apoptosis in Prostate Cancer Cells.

Fluvastatin (FLV) is known to inhibit the 3-hydroxy-3-methylglutaryl coenzyme A (HMG-CoA), which is over-expressed in various cancers. FLV has been reported to decrease cancer development and metastasis. However, because of low bioavailability, extensive first-pass metabolism and short half-life of FLV (1.2 h), it is not appropriate for clinical application. Therefore, FLV-loaded emulsomes were formulated and optimized using Box-Behnken experimental design to achieve higher efficiency of formulation. Antitumor activity of optimized FLV-loaded emulsomes was evaluated in prostate cancer cells using cell cytotoxicity, apoptotic activity, cell cycle analysis, and enzyme-linked immunosorbent assay. The FLV-loaded emulsomes exhibited a monodispersed size distribution with a mean particle size less than 100 nm as measured by zetasizer. The entrapment efficiency was found to be 93.74% with controlled drug release profile. FLV-EMLs showed a significant inhibitory effect on the viability of PC3 cells when compared to the free FLV (P < 0.0025). Furthermore, FLV-EMLs showed significant arrest in G2/M and increase in percentage of apoptotic cells as compared to free FLV. FLV-EMLs were more effective than free FLV in reducing mitochondrial membrane potential and increase in caspase-3 activity. These results suggesting that FLV-EMLs caused cell cycle arrest which clarifies its significant antiproliferative effect compared to the free drug. Therefore, optimized FLV-EMLs may be an effective carrier for FLV in prostate cancer treatment.

Controlled release of iodine from cross-linked cyclodextrin metal-organic frameworks for prolonged periodontal pocket therapy.

Effective therapeutic system to periodontitis was designed using cross-linked cyclodextrin metal-organic framework (COF) as carrier for iodine and further suspended in hydroxyethyl cellulose gel as I2@COF-HEC hydrogel. Inclusion of iodine within the COF was demonstrated by SR-FTIR spectral and characteristic DSC and TGA changes. Molecular modelling identified the interaction of iodine with both COF central cavity and individual cyclodextrin moieties of COF. In vitro results of study demonstrated that iodine release in artificial saliva from I2@COF-HEC hydrogel could be extended up to 5 days, which was slower than I2@COF particles. Using an in vivo rat model of periodontitis, micro-computed tomography of alveolar bone morphology demonstrated that I2@COF-HEC hydrogel showed similar effects in decreasing periodontal pocket depth and alveolar bone resorption to minocycline ointment, a periodontitis antibiotic. The I2@COF-HEC hydrogel is a novel local delivery device of iodine as a broad spectrum antimicrobial use for treatment of periodontitis.

In vitro Preparation and Evaluation of Sustained-Release Microcapsules of Salvianolic Acid.

OBJECTIVE: This study aims to investigate the preparation of sustained-release microcapsules of salvianolic acid. METHODS: The stability of salvianolic acid microcapsules was improved, and the time of action was prolonged in the present study. This was prepared using the spray-drying method, with chitosan as the carrier. In the preparation process, the prescription and process were optimized by L9 (34) using an orthogonal design, with yield and drug loading as indexes, in order to obtain optimum conditions. RESULTS: The optimal process and prescription for the preparation of salvianolic acid microcapsules were found to be as follows: mass concentration of chitosan, 1.5%; mass ratio of salvianolic acid to chitosan, 1:3; inlet air temperature, 190°C; and peristaltic pump speed, 300 mL·h-1. The surface of the microcapsules was round, the drug loading was 25.99% ± 2.14%, the yield was 51.88% ± 2.84%, the entrapment efficiency was 86.21% ± 2.89%, and the average particle size was 105.6 ± 2.56 nm. The microcapsules in vitro had certain sustained release characteristics. The internally fitted first-order release model equation was ln(1-Q) = -0.236 t + 4.591 7, r = 0.920. In addition, the results of differential scanning calorimetry show that the properties of salvianolic acid were not changed by the microcapsules. CONCLUSION: Sustained-release microcapsules of salvianolic acid can be successfully prepared by adopting marine polysaccharide as a carrier.

Chitosan-glucuronic acid conjugate coated mesoporous silica nanoparticles: A smart pH-responsive and receptor-targeted system for colorectal cancer therapy.

Glycosylated pH-sensitive mesoporous silica nanoparticles (MSNs) of capecitabine (CAP) were developed for targeting colorectal cancer. The MSNs possessed an average pore diameter of 8.12 ± 0.43 nm, pore volume of 0.73 ± 0.21 cm3/g, and particle size of 245.24 ± 5.75 nm. A high loading of 180.51 ± 5.23 mg/g attributed to the larger pore volume was observed. The surface of the drug-loaded MSNs were capped with chitosan-glucuronic acid (CHS-GCA) conjugate to combine two strategies viz. pH-sensitive, and lectin receptor mediated uptake. In vitro studies demonstrated a pH-sensitive and controlled release of CAP which was further enhanced in the presence of rat caecal content. Higher uptake of the (CAP-MSN)CHS-GCA was observed in HCT 116 cell lines. The glycosylated nanoparticles revealed reduction in the tumors, aberrant crypt foci, dysplasia and inflammation, and alleviation in the toxic features. This illustrated that the nanoparticles showed promising antitumor efficacy with reduced toxicity and may be used as a effective carrier against cancer.

Development of multifunctional nanocomposites for controlled drug delivery and hyperthermia.

Magnetic nano/micro-particles based on clinoptilolite-type of natural zeolite (CZ) were fabricated and were expected to act as carriers for controlled drug delivery/release, imaging and local heating in biological systems. Adsorption of rhodamine B, sulfonated aluminum phthalocyanine and hypericin by magnetic CZ nano/micro-particles was investigated, as was the release of hypericin. Using an alternating magnetic field, local temperature increase by 10 °C in animal tissue with injected magnetic CZ particles was demonstrated. In addition, the CZ-based particles have been found to exhibit an anti-amyloidogenic effect on the amyloid aggregation of insulin and lysozyme in a dose- and temperature-dependent manner. Therefore, the mesoporous structure of CZ particles provided a unique platform for preparation of multifunctional magnetic and optical probes suitable for optical imaging, MRI, thermo- and phototherapy and as effective containers for controlled drug delivery. We concluded that magnetic CZ nano/micro-particles could be evaluated for further application in cancer hyperthermia therapy and as anti-amyloidogenic agents.

Preparation of double-layer nanoemulsions with controlled release of glucose as prevention of hypoglycemia in diabetic patients.

Encapsulation systems promote targeted delivery to the gastrointestinal tract. An oil-in-water (O/W) nanoemulsion was covered using new delivery system composition based on zein and sodium alginate. The impact of aqueous phase (distilled water and cooked pumpkin puree), pH (2-4), and zein-alginate concentration solution (0.05-0.20% w/v) was investigated on particle size, zeta potential, incorporation efficiency (IE), stability, viscosity, and glucose release from single-layer (SLN) and double-layer nanoemulsion (DLN). DLNs showed a larger droplet size and zeta potential. The slow gradual release of glucose proved effective application of zein/alginate as delivery system for nanoemulsion. Moreover, cooked pumpkin and 0.12% of zein exhibited more delayed release of glucose than distilled water as an aqueous phase of DLN and as a delivery system respectively. Up-to-49% IE, up-to-50% stability in a period of 7-day storage, and controlled-release glucose for 240 min under in vitro gastrointestinal conditions were obtained in DLN. The results of the current study revealed that SLN covered by zein at 0.12% of concentration can be an ideal delivery system composition for patients with hypoglycemia and clinical problems.

Construction and research on size and phase 'fixed-point remodelling' intelligent drug delivery system.

It is important to enhance penetration depth of nanomedicine and realise rapid drug release simultaneously at targeted tumour for improving anti-tumour efficiency of chemotherapeutic drugs. This project employed sodium alginate (Alg) as matrix material, to establish tumour-responsive nanogels with particle size conversion and drug controlled release functions. Specifically, tumour-targeting peptide CRGDK was conjugated with Alg first (CRGDK-Alg). Then, doxorubicin (DOX) was efficiently encapsulated in CRGDK-FeAlg nanogel during the cross-linking process (CRGDK-FeAlg/DOX). This system was closed during circulation. Once reaching tumour, the particle size of nanogels was reduced to ∼25 nm, which facilitated deep penetration of DOX in tumour tissues. After entering tumour cells, the size of nanogels was further reduced to ∼10 nm and DOX was released simultaneously. Meanwhile, FeAlg efficiently catalysed H2O2 to produce •OH by Fenton reaction, achieving local chemodynamic therapy without O2 mediation. Results showed CRGDK-FeAlg/DOX significantly inhibited tumour proliferation in vivo with V/V0 of 1.13 after treatment, significantly lower than that of control group with V/V0 of 4.79.

Physicochemical, pharmacokinetic, and pharmacodynamic characterization of isradipine tablets for controlled release.

Isradipine is a dihydropyridine calcium channel blocker (CCB) commonly used as vasodilator with antihypertensive properties. A remote-controlled release formulation for isradipine would substantially improve the clinical outcomes of the patients requiring chronic long-term treatment. In this work, sustained release (SR) tablets of isradipine, composed of hydroxypropylmethyl cellulose (HPMC), have been produced by wet granulation and their in vitro and in vivo characterization was compared to a conventional tablet dosage form of immediate release (IR) as preliminary assessment. Tablets composed of 15.0% (wt/wt) HPMC exhibited a SR profile over a period of 24 hours. The release of isradipine followed a Fickian diffusion pattern obeying to the first order kinetics and the extent of absorption was even higher in comparison to the developed conventional tablets, which showed immediate drug release. In vivo studies were carried out in rabbits, showing that the extent of isradipine absorption from the developed tablets was higher in comparison to IR tablets due to the modified release profile obtained for the former (p < 0.05). Our results suggest that SR tablets of isradipine are an efficient solid dosage form to overcome the limitations encountered in conventional IR tablets.

Connecting the dots in drug delivery: A tour d'horizon of chitosan-based nanocarriers system.

One of the most promising pharmaceutical research areas is developing advanced delivery systems for controlled and sustained drug release. The drug delivery system (DDS) can be designed to strengthen the pharmacological and therapeutic characteristics of different medicines. Natural polymers have resolved numerous commencing hurdles, which hindered the clinical implementation of traditional DDS. The naturally derived polymers furnish various advantages such as biodegradability, biocompatibility, inexpensiveness, easy availability, and biologically identifiable moieties, which endorse cellular activity in contrast to synthetic polymers. Among them, chitosan has recently been in the spotlight for devising safe and efficient DDSs due to its superior properties such as minimal toxicity, bio-adhesion, stability, biodegradability, and biocompatibility. The primary amino group in chitosan shows exceptional qualities such as the rate of drug release, anti-microbial properties, the ability to cross-link with various polymers, and macrophage activation. This review intends to provide a glimpse into different practical utilization of chitosan as a drug carrier. The first segment of the review will give cognizance into the source of extraction and chitosan's remarkable properties. Further, we have endeavored to provide recent literature pertaining to chitosan applications in various drug delivery systems via different administration routes along with current patented chitosan formulations.

Preparation, Characterization and Antioxidant Activities of Kelp Phlorotannin Nanoparticles.

Phlorotannins are a group of major polyphenol secondary metabolites found only in brown algae and are known for their bioactivities and multiple health benefits. However, they can be oxidized due to external factors and their bioavailability is low due to their low water solubility. In this study, the potential of utilizing nanoencapsulation with polyvinylpyrrolidone (PVP) to improve various activities of phlorotannins was explored. Phlorotannins encapsulated by PVP nanoparticles (PPNPS) with different loading ratios were prepared for characterization. Then, the PPNPS were evaluated for in vitro controlled release of phlorotannin, toxicity and antioxidant activities at the ratio of phlorotannin to PVP 1:8. The results indicated that the PPNPS showed a slow and sustained kinetic release of phlorotannin in simulated gastrointestinal fluids, they were non-toxic to HaCaT keratinocytes and they could reduce the generation of endogenous reactive oxygen species (ROS). Therefore, PPNPS have the potential to be a useful platform for the utilization of phlorotannin in both pharmaceutical and cosmetics industries.