[Analysis of Flame Retardants Bis(2,3-dibromopropyl) phosphate and Tris(2,3-dibromopropyl) phosphate in Textile Products by GC-MS].

The use of flame retardants, namely bis(2,3-dibromopropyl) phosphate (BDBPP) and tris(2,3-dibromopropyl) phosphate (TDBPP), in textile products such as curtains, carpets and sleeping clothes is banned in Japan under the 'Act on the Control of Household Products Containing Harmful Substances'. Herein, we developed a GC-MS based method to quantify these compounds with greater accuracy and safety than the current official method. For accurate and sensitive quantification, deuterated compounds, BDBPP-d10 and TDBPP-d15, were used as surrogate standards. In consideration of the safety of the analyst, certain solvents and reagents used for the pretreatment that are carcinogenic or have a risk of explosion were replaced. For the extraction step, benzene was replaced by ethyl acetate, and for the methyl derivatization step, the reagent was changed from a self-prepared solution of diazomethane in ether to a solution of trimethylsilyl diazomethane in hexane, a safe and easy-to-use commercially available reagent. The calibration curves were liner in the range of 0.5-8.0 µg/mL for both methylated BDBPP (BDBPP-Me) and TDBPP. The detection limit was 0.05 µg/g for BDBPP-Me and 0.3 µg/g for TDBPP, which is sufficiently low compared to the current detection limits of 10 µg/g for BDBPP-Me and 8 µg/g for TDBPP. The recoveries in various curtain material were 66-108% and relative standard deviations were 1.2-10.2% when 5 µg BDBPP and TDBPP were added to 0.5 g of samples. Thus, the developed method is applicable to textile products of various materials.

[Examination of Analytical Method for Mothproofing Agents to Revise the Official Methods Based on "Act on the Control of Household Products Containing Harmful Substances"].

In Japan, the use of mothproofing agents [dieldrin and 4,6-dichloro-7-(2,4,5-trichlorophenoxy)-2-trifluoromethylbenzimidazole; DTTB] in textiles is regulated by the Act on the Control of Household Products Containing Harmful Substances. Since official analytical methods for these agents have been in place for approximately 40 years, we developed an improved method in a previous study. In the present study, we validated this method. Accordingly, six laboratories analyzed the sample prepared at 3 µg/g (1/10 of the regulation value) and 30 µg/g (the regulation value). The high accuracy of the results for these samples in almost all the cases (accuracy: 70-120%, repeatability: <10%, reproducibility: <15%), confirmed the validity of the method. In addition, we examined three samples that were distributed before the introduction of the regulation. The analysis results for these samples showed little variation between laboratiories, indicating that our method is also applicable to actual samples. Meanwhile, the quantitative value was clearly lower in one laboratory than in the others. We presumed that the enhanced effect of the sample matrix (matrix effect) on the internal standards in GC-MS analysis was the main cause for this trend. Therefore, we examined the analytical method using polyethylene glycol 300 (PEG) as an analyte protectant. As PEG minimized the GC-MS response difference between the standard solution and the matrix-containing solution, GC-MS analysis with PEG would be useful for matrix effect measurements in this method.

[Examination of Analytical Methods for Methanol, Trichloroethylene, and Tetrachloroethylene to Revise the Official Methods Based on the Act on the Control of Household Products Containing Harmful Substances].

In Japan, the use of methanol, trichloroethylene, and tetrachloroethylene in aerosol household products is banned under the Act on the Control of Household Products Containing Harmful Substances. As the official analytical methods for testing for these substances have not been revised for over 35 years, several issues have been pointed out. Thus, we developed a new method to revise the official method in our previous study. In this study, validation of the proposed method for detecting the target substances was conducted using two aerosol-product samples (A and B), which contained methanol, trichloroethylene, and tetrachloroethylene. Sample A comprised regulated values of these compounds, while sample B comprised one-tenth of the regulated amounts. They also contained several volatile compounds that served as interfering substances. Subsequently, the samples were analyzed using head space/gas chromatography-mass spectrometry, and it was confirmed that the three target substances were separated from the other chemicals on chromatograms. Validation tests were conducted at seven laboratories to evaluate the proposed method using the prepared samples. In one laboratory, the recovery of trichloroethylene and tetrachloroethylene in sample B was slightly higher at 120%, while the recoveries obtained from the other tests were between 70% and 120%. Relative standard deviation at each laboratory was less than 10%. Furthermore, the relative standard deviations between the validation tests with respect to each chemical were less than 15%. Therefore, the method validated in this study was considered to be effective as a revised method for testing for methanol, trichloroethylene, and trichloroethylene in household aerosol products.

Risk communication for labeling all ingredients in consumer products.

The labeling of all ingredients contained in consumer products has been requested by consumers concerned regarding their safety. Consequently, regulatory agencies have set guidelines for industries on how to provide safety information regarding the ingredients in their products. However, discordant opinions were raised from stakeholders, resulting in the formation of a risk communication forum among industries, regulatory agencies, consumer groups, and academia. There are several methods that might be utilized to provide ingredient information to consumers: (1) listing all ingredients on the label of products, (2) providing major ingredients on the label of products, (3) presenting all ingredients on the websites of each manufacturer, and (4) listing major ingredients on the label of products and the remainder of ingredients (not on the label) on the websites. Each method might have its own advantages and disadvantages with respect to providing the information regarding the names of the ingredients used in consumer products to the consumers. A continuous risk communication forum might be an effective tool to facilitate an improved understanding of chemical information, toxicological science, regulatory guidelines, labeling methods, and consumers' concern. This study suggests that risk communication efforts may be helpful and a good opportunity for stakeholders to exchange opinions and reach a harmonious conclusion on labeling of consumer products ingredients.

Factors influencing appropriate management of household hazardous waste in Nakhon Nayok, Thailand: A multilevel analysis.

Household hazardous products contain hazardous chemicals, so when discarding these products a household hazardous waste (HHW) stream is created. HHW is a major environmental problem in Thailand, yet HHW has received scant attention so management is often inadequate or inappropriate. The objective of this study was to investigate the factors associated with appropriate HHW management in Thailand. Data were collected using a structured questionnaire completed during randomly assigned household interviews in Nakhon Nayok province, Thailand, between February and May 2017. The proportion of "appropriate management" was presented as percentage with its 95% confidence interval (CI). A multilevel mixed-effects logistic regression model was performed to determine the factors associated with appropriate HHW management, with 663 households included. The proportion of appropriate HHW management was 23.4% (95%CI: 20.2% to 26.6%). Both individual and local government administrative organization factors had on an effect on appropriate HHW management, including (a) being female (adjusted odds ratio [OR]:1.59; 95%CI: 1.03 to 2.46); (b) household size (adjusted OR: 1.66; 95%CI: 1.09 to 2.54); (c) knowledge score vis-à-vis HHW management (adjusted OR: 1.78; 95%CI: 1.43 to 2.02); (d) appropriate HHW storage behavior (adjusted OR: 2.48; 95%CI: 1.60 to 3.83); and (e) appropriate HHW use behavior (adjusted OR: 3.97; 95%CI: 2.40 to 6.58). The government of Thailand might consider a program to increase appropriate management of household hazardous waste to mitigate public health and environmental contamination risks. Implications: Household hazardous waste becomes a major concern in many countries, including Thailand. The household hazardous waste management should be started at the source first, because household hazardous waste is mixed with the municipal waste stream. Thus, this study finding will be important for policymakers such as government and local government and can be used to create a specific policy and campaigns for household hazardous waste management.

Health impact assessment of a skin sensitizer: Analysis of potential policy measures aimed at reducing geraniol concentrations in personal care products and household cleaning products.

A methodology to assess the health impact of skin sensitizers is introduced, which consists of the comparison of the probabilistic aggregated exposure with a probabilistic (individual) human sensitization or elicitation induction dose. The health impact of potential policy measures aimed at reducing the concentration of a fragrance allergen, geraniol, in consumer products is analysed in a simulated population derived from multiple product use surveys. Our analysis shows that current dermal exposure to geraniol from personal care and household cleaning products lead to new cases of contact allergy and induce clinical symptoms for those already sensitized. We estimate that this exposure results yearly in 34 new cases of geraniol contact allergy per million consumers in Western and Northern Europe, mainly due to exposure to household cleaning products. About twice as many consumers (60 per million) are projected to suffer from clinical symptoms due to re-exposure to geraniol. Policy measures restricting geraniol concentrations to <0.01% will noticeably reduce new cases of sensitization and decrease the number of people with clinical symptoms as well as the frequency of occurrence of these clinical symptoms. The estimated numbers should be interpreted with caution and provide only a rough indication of the health impact.

Exposure factors for cleaning, automotive care, and surface protection products for exposure assessments.

Accurately measuring the usage patterns of consumer products (CPs) is important to conduct realistic exposure assessments. We determined the exposure factors for 18 consumer products: household bleach, mold stain remover, all-purpose cleaner, washing machine cleaner, air conditioner cleaner, glass cleaner, drain cleaner, adhesive remover, liquid snow chain, tire shine spray, wheel cleaner, rain repellent, car wax spray, leather polish, furniture polish, anti-fog product, fabric waterproofing spray, and rust inhibitor. Field survey staff visited homes and collected product use information via face-to-face interviews. In total, 10,000 participants (5010 men and 4990 women) aged 15 years and older completed the questionnaire. Household bleach had the highest use rate of 47.4% and use rates for the other products ranged from 0.8 to 21.7%. The use rates of many CPs differed by age group and gender. Many household cleaning products were used regularly, but some products, such as air conditioner cleaner and liquid snow chain, were used in specific seasons or for specific purposes; therefore, they were used less frequently compared to cleaning products. These exposure factor data will be useful as input data for exposure and risk assessments and setting safety guidelines.

Determination of Common Adulterants in Herbal Medicine and Food Samples using Core-shell Column Coupled to Tandem Mass Spectrometry.

High-performance liquid chromatography coupled to tandem mass spectrometry was used to develop and validate a rapid method to qualitatively and quantitatively analyse 18 common adulterants in herbal medicine and food samples. Initially, the mobile phase composition was optimized in three different columns: core-shell, monolithic and standard 3.5-µm-particle-size columns. The results show that the core-shell column provides the best separation. Moreover, the tandem mass spectrometry was optimized. The linear range for all adulterants was 0.5-500 µg mL-1. Finally, the samples that were supplied by the Public Authority of Customer Protection, Ministry of Health, and those collected from the local market were analysed. The results indicate that 7 of 33 analysed samples contained adulterants. The adulterated samples mainly contain sildenafil, tadalafil or vardenafil. The concentrations of these three adulterants in the samples were 0.18-39 wt%. This study is the first report in the Sultanate of Oman about adulteration in herbal medicine and food samples. The results clearly raise some concern and require proper plan of action to increase public awareness about this serious issue.

Pregnant Women's perceptions of exposure to brominated flame retardants.

BACKGROUND: Recent media reports on human studies associating brominated flame retardants (BFRs) in household products in pregnancy with urogenital anomalies in boys and endocrine disruption in both sexes. We sought to explore the perceptions of pregnant women of brominated flame retardant (BFR) exposure, in light of recent media reports on the adverse health effects of BFR exposure prenatally. METHODS: Pregnant women were recruited for interviews through posters and pamphlets in prenatal clinics, prenatal fairs and community centres. Interviews were audiotaped and transcribed verbatim for Charmaz-based qualitative analysis supported by NVIVO 10™. RESULTS: Theoretical sufficiency was reached after analyzing the interviews of 23 pregnant women. Themes co-constructed were: I-Lack of Awareness of BFRs; II-Factors Influencing BFR Exposure; III-Responsibility; IV-Informed Choice. Almost all participants felt it was difficult to make informed choices to avoid BFRs, and wanted communication from clinicians and regulation from governments regarding decreasing BFR exposure. CONCLUSION: Pregnant women in Canada may be unaware of the potential risks of exposure to BFRs. Professional organizations and governments should further study risk associated with BFR exposure in pregnancy and provide educational materials for pregnant women and clinicians regarding BFR exposure.

Possible underestimations of risks for the environment due to unregulated emissions of biocides from households to wastewater.

The aim of this study was to investigate the role of household products as possible sources of biocidal active substances in municipal wastewater and their regulation under the Biocidal Products Regulation (EU) 528/2012. In 131 households, we investigated the prevalence of products used to control pests, washing and cleaning agents and select personal care products with high release to wastewater. Inventories of these products were established with the help of barcode scanning. All uses of biocidal active substances were evaluated regarding their assessment under the Biocidal Products Regulation. 2963 products were scanned in total, with 48% being washing and cleaning agents, 43% personal care products and 9% products used to control pests. Biocidal active substances were found in each household. These were observed primarily in washing and cleaning agents and personal care products (90%), while only a small percentage of the observations of biocidal active substances was in biocidal products. 64% of the observations of biocidal active substances were in applications that do not fall under the Biocidal Products Regulation and are thus not subject to its environmental risk assessment. This study shows clearly that risks for the environment are underestimated because unregulated emissions to wastewater occur. It demonstrates that there are gaps in the current chemical legislation that lead to a release of substances into wastewater that were not subject to environmental risk assessment under the Biocidal Products Regulation. This is one example of the limitations of scientific risk assessment of chemicals - its complexity is immense. From our point of view, the results underline the importance of a sustainable use of the substances as this is the only way to decrease yet unidentified risks.

Cosmet'eau-Changes in the personal care product consumption practices: from whistle-blowers to impacts on aquatic environments.

The Cosmet'eau project (2015-2018) investigates the "changes in the personal care product (PCP) consumption practices: from whistle-blowers to impacts on aquatic environments." In this project, the example of PCPs will be used to understand how public health concerns related to micropollutants can be addressed by public authorities-including local authorities, industries, and consumers. The project aims to characterize the possible changes in PCP consumption practices and to evaluate the impact of their implementation on aquatic contamination. Our goals are to study the whistle-blowers, the risk perception of consumers linked with their practices, and the contamination in parabens and their substitutes, triclosan, and triclocarban from wastewater to surface water. The project investigates the following potential solutions: modifications of industrial formulation or changes in consumption practices. The final purpose is to provide policy instruments for local authorities aiming at building effective strategies to fight against micropollutants in receiving waters.

Assessment of Emergency Preparedness of Households in Israel for War--Current Status.

OBJECTIVE: In recent decades, many efforts have been made, both globally and locally, to enhance household preparedness for emergencies. In the State of Israel in particular, substantial investment has been made throughout the years in preparing the population for one of the major threats to the civilian population--a rapidly deteriorating regional conflict that involves high-trajectory weapons (ie, rocket and missile fire) launched at the home front. The purpose of this study was to examine the current preparedness level of the Israeli public for this threat and determine the correlates of such preparedness with known factors. METHODS: A telephone-based, random sampling of 503 households representative of the Israeli population was carried out during October 2013. The questionnaire examined the level of household preparedness as well as attitudes towards threat perception, responsibility, willingness to search for information, and sense of preparedness. Statistical analysis was performed to determine the level of preparedness in the general population and to find correlates to this preparedness in attitudes and demographic variables. RESULTS: More than half of the sample reported complying with 50% or fewer of the actions recommended by the Israeli Home Front Command. Having an increased sense of preparedness and willingness to search for related information were positively correlated with actual household preparedness, and the latter was also found to be the most predictive variable of household preparedness. CONCLUSIONS: Although the overall household preparedness reported is mediocre, the level of preparedness found in this study suggests better preparedness of the population in Israel for its primary threat. The findings suggest that in order to promote preparedness of the Israeli public for war, emphasis should be put on increasing the public demand for information and encouraging people to evaluate their sense of preparedness.

Determining the exposure factors of personal and home care products for exposure assessment.

An accurate understanding of the usage patterns of consumer products is important for realistic exposure assessment. Since such patterns differ by country, a Korean national database for exposure factors is needed. We determined the exposure factors of 10 consumer products (face cleanser, toothpaste, shampoo, hair conditioner, body wash, dish and laundry detergents, fabric deodorizer, antistatic spray, and shoe polish. Field survey staff visited homes and collected product use information by questionnaire. In total, 816 men and 2517 women aged 15 years and older from 2500 households completed the questionnaire. Field technicians also re-visited 85 households to investigate the circumstances of use and the reliability of the questionnaire data. Greater than 97% of the sampled population reported use of toothpaste and shampoo. Hair conditioner, body wash, and face cleanser were used by ~60% of the population and by specific age groups and genders. The amount of consumer products used was comparable between that reported in the questionnaire and that measured directly during house visits, and the ratios of usage amounts ranged from 0.75 to 1.69. The exposure factor data obtained from this study could be useful for regulatory agencies when setting safety guidelines for product use.

Electrical safety of conducted electrical weapons relative to requirements of relevant electrical standards.

INTRODUCTION: TASER(®) conducted electrical weapons (CEW) deliver electrical pulses that can inhibit a person's neuromuscular control or temporarily incapacitate. TASER X26, X26P, and X2 are among CEW models most frequently deployed by law enforcement agencies. The X2 CEW uses two cartridge bays while the X26 and X26P CEWs have only one. The TASER X26P CEW electronic output circuit design is equivalent to that of any one of the two TASER X2 outputs. The goal of this paper was to analyze the nominal electrical outputs of TASER X26, X26P, and X2 CEWs in reference to provisions of several international standards that specify safety requirements for electrical medical devices and electrical fences. Although these standards do not specifically mention CEWs, they are the closest electrical safety standards and hence give very relevant guidance. METHODS: The outputs of two TASER X26 and two TASER X2 CEWs were measured and confirmed against manufacturer and other published specifications. The TASER X26, X26P, and X2 CEWs electrical output parameters were reviewed against relevant safety requirements of UL 69, IEC 60335-2-76 Ed 2.1, IEC 60479-1, IEC 60479-2, AS/NZS 60479.1, AS/NZS 60479.2 and IEC 60601-1. Prior reports on similar topics were reviewed as well. RESULTS AND CONCLUSION: Our measurements and analyses confirmed that the nominal electrical outputs of TASER X26, X26P and X2 CEWs lie within safety bounds specified by relevant requirements of the above standards.

[Examination of analytical method for triphenyltin (TPT) and tributyltin (TBT) to revise the official methods based on "Act on the Control of Household Products Containing Harmful Substances"].

The use of triphenyltin (TPT) and tributyltin (TBT) in some household products is banned by "Act on the Control of Household Products Containing Harmful Substances" in Japan. To revise the official analytical method, the method for detecting these organotin compounds was examined in six laboratories using a textile product, water-based adhesive, oil-based paint, which contained known amounts of TPT and TBT (0.1, 1.0, 10 µg/g). TPT and TBT were measured by GC-MS after ethyl-derivation with sodium tetraethylborate. The TBT recoveries in the samples were 70-120%. The TPT recoveries in the water-based adhesive samples were 80-110%, while its concentrations in the textile product and oil-based paint samples decreased because of dephenylation during storage. However, the precision of the method examined was satisfactory because most coefficients of variation for TPT and TBT in the samples were less than 10%. Furthermore, the revised method was able to detect concentrations lower than the officially regulated value. However, the sample matrix and the condition of analytical instrument might affect the estimated TPT and TBT concentrations. Therefore, the revised method may not be suitable for quantitative tests; rather, it can be employed to judge the acceptable levels of these organotin compounds by comparing the values of control sample containing regulated amounts of TPT and TBT with those for an unknown sample, with deuterated TPT and TBT as surrogate substances. It is desirable that TPT in textile and oil-based paint samples are analyzed immediately after the samples obtained because of the decomposition of TPT.

Comparison of wipe materials and wetting agents for pesticide residue collection from hard surfaces.

Different wipe materials and wetting agents have been used to collect pesticide residues from surfaces, but little is known about their comparability. To inform the selection of a wipe for the National Children's Study, the analytical feasibility, collection efficiency, and precision of Twillwipes wetted with isopropanol (TI), Ghost Wipes (GW), and Twillwipes wetted with water (TW), were evaluated. Wipe samples were collected from stainless steel surfaces spiked with high and low concentrations of 27 insecticides, including organochlorines, organophosphates, and pyrethroids. Samples were analyzed by GC/MS/SIM. No analytical interferences were observed for any of the wipes. The mean percent collection efficiencies across all pesticides for the TI, GW, and TW were 69.3%, 31.1%, and 10.3% at the high concentration, respectively, and 55.6%, 22.5%, and 6.9% at the low concentration, respectively. The collection efficiencies of the TI were significantly greater than that of GW or TW (p<0.0001). Collection efficiency also differed significantly by pesticide (p<0.0001) and spike concentration (p<0.0001). The pooled coefficients of variation (CVs) of the collection efficiencies for the TI, GW, and TW at high concentration were 0.08, 0.17, and 0.24, respectively. The pooled CV of the collection efficiencies for the TI, GW, and TW at low concentration were 0.15, 0.19, and 0.36, respectively. The TI had significantly lower CVs than either of the other two wipes (p=0.0008). Though the TI was superior in terms of both accuracy and precision, it requires multiple preparation steps, which could lead to operational challenges in a large-scale study.

Animal use in the chemical and product manufacturing sectors - can the downtrend continue?

During the 1990s and early 2000s, a number of manufacturing companies in the cosmetic, personal care and household product industries were able to substantially reduce their use of animals for testing (or to not use animals in the first place). These reductions were almost always the result of significant financial contributions to either direct, in-house alternatives research, or to support personnel whose duties were to understand and apply the current state-of-the-art for in vitro testing. They occurred almost exclusively in non-regulatory areas, and primarily involved acute topical toxicities. Over the last few years, the reduction in animal use has been much less dramatic, because some companies are still reluctant to change from the traditional animal studies, because systemic, repeat-dose toxicity is more difficult to model in vitro, and because many products still require animal testing for regulatory approval. Encouragingly, we are now observing an increased acceptance of non-animal methods by regulatory agencies. This is due to mounting scientific evidence from larger databases, agreement by companies to share data and testing strategies with regulatory agencies, and a focus on smaller domains of applicability. These changes, along with new emphasis and financial support for addressing systemic toxicities, promise to provide additional possibilities for industry to replace animals with in vitro methods, alone or in combination with in silico methods. However, the largest advance will not occur until more companies commit to using the non-animal test strategies that are currently available.