Direct Electrochemical Generation of Catalytically Competent Oxyferryl Species of Classes I and P Dye Decolorizing Peroxidases.

This work introduces a novel way to obtain catalytically competent oxyferryl species for two different dye-decolorizing peroxidases (DyPs) in the absence of H2O2 or any other peroxide by simply applying a reductive electrochemical potential under aerobic conditions. UV-vis and resonance Raman spectroscopies show that this method yields long-lived compounds II and I for the DyPs from Bacillus subtilis (BsDyP; Class I) and Pseudomonas putida (PpDyP; Class P), respectively. Both electrochemically generated high valent intermediates are able to oxidize ABTS at both acidic and alkaline pH. Interestingly, the electrocatalytic efficiencies obtained at pH 7.6 are very similar to the values recorded for regular catalytic ABTS/H2O2 assays at the optimal pH of the enzymes, ca. 3.7. These findings pave the way for the design of DyP-based electrocatalytic reactors operable in an extended pH range without the need of harmful reagents such as H2O2.

Biosorption of aluminum through the use of non-viable biomass of Pseudomonas putida.

Living and non-living biomass of Pseudomonas putida A (ATCC 12633) was used as biosorbent for the removing of Al(3+) from aqueous solutions. The process was stable with time, efficient at pH 4.3 and between 15°C and 42°C. Two isotherms models were applied to describe the interaction between the biosorbent and Al(3+). Non-living biomass of P. putida A (ATCC 12633) was found to be the most efficient at adsorbing Al(3+) with a maximum sorption capacity of 0.55mg Al(3+)/gr adsorbent and with 36×10(5) binding sites of Al(3+)/microorganisms. Infrared spectroscopy analysis shows that the biosorbent present some vibrational band of functional groups that change in presence of Al(3+): hydroxyl, carboxyl and phosphate. Considering that Al(3+) binds to the phosphate group of phosphatidylcholine, non-viable biomass of P. putida PB01 (mutant lacking phosphatidylcholine) was used. Aluminum adsorption of the parental strain was 30 times higher than values registered in P. putida PB01 (36×10(5) sites/microorganism vs 1.2×10(5) sites/microorganism, respectively). This result evidenced that the absence of phosphatidylcholine significantly affected the availability of the binding sites and consequently the efficiency of the biomass to adsorb Al(3+).

Content of cardiolipin of the membrane and sensitivity to cationic surfactants in Pseudomonas putida.

AIMS: To establish the role of cardiolipin (CL) of the membrane in response to the presence of tetradecyltrimethylammonium in Pseudomonas putida A (ATCC 12633). METHODS AND RESULTS: Two ORFs of Ps. putida A (ATCC 12633), which in Ps. putida KT2440 encode the putative CL synthase genes cls and cls2, were cloned, sequenced and mutated. Only the double mutant lacking cls and cls2 showed a reduction of the CL content, 83% lower than the amount produced by the wild-type. Accompanying this change was a 40% decrease in the content of unsaturated fatty acid. Consequently, the membrane of the mutant was more rigid than the one of the parental strain, as observed using fluorescence polarization techniques. The mutant strain showed reduced viability in the presence of tetradecyltrimethylammonium. The incorporation of exogenous CL into its membrane relieved sensitivity to the cationic detergent. CONCLUSIONS: Pseudomonas Putida cells with low levels of CL die in the presence of tetradecyltrimethylammonium, because they cannot counter the fluidizing effect of the cationic surfactant. SIGNIFICANCE AND IMPACT OF THE STUDY: The modification in the membrane phospholipids composition allows knowing the adaptation strategy of Ps. putida when these bacteria are exposed to cationic surfactant.

Crystal Structures of Apo and Liganded 4-Oxalocrotonate Decarboxylase Uncover a Structural Basis for the Metal-Assisted Decarboxylation of a Vinylogous ß-Keto Acid.

The enzymes in the catechol meta-fission pathway have been studied for more than 50 years in several species of bacteria capable of degrading a number of aromatic compounds. In a related pathway, naphthalene, a toxic polycyclic aromatic hydrocarbon, is fully degraded to intermediates of the tricarboxylic acid cycle by the soil bacteria Pseudomonas putida G7. In this organism, the 83 kb NAH7 plasmid carries several genes involved in this biotransformation process. One enzyme in this route, NahK, a 4-oxalocrotonate decarboxylase (4-OD), converts 2-oxo-3-hexenedioate to 2-hydroxy-2,4-pentadienoate using Mg(2+) as a cofactor. Efforts to study how 4-OD catalyzes this decarboxylation have been hampered because 4-OD is present in a complex with vinylpyruvate hydratase (VPH), which is the next enzyme in the same pathway. For the first time, a monomeric, stable, and active 4-OD has been expressed and purified in the absence of VPH. Crystal structures for NahK in the apo form and bonded with five substrate analogues were obtained using two distinct crystallization conditions. Analysis of the crystal structures implicates a lid domain in substrate binding and suggests roles for specific residues in a proposed reaction mechanism. In addition, we assign a possible function for the NahK N-terminal domain, which differs from most of the other members of the fumarylacetoacetate hydrolase superfamily. Although the structural basis for metal-dependent ß-keto acid decarboxylases has been reported, this is the first structural report for that of a vinylogous ß-keto acid decarboxylase and the first crystal structure of a 4-OD.

Toluene Dioxygenase-Catalysed Oxidation of Benzyl Azide to Benzonitrile: Mechanistic Insights for an Unprecedented Enzymatic Transformation.

Enzymatic dioxygenation of benzyl azide by toluene dioxygenase (TDO) produces significant amounts of the cis-cyclohexadienediol derived from benzonitrile, along with the expected azido diols. We demonstrate that TDO catalyses the oxidation of benzyl azide to benzonitrile, which is further dioxygenated to produce the observed cis-diol. A proposed mechanism for this transformation involves initial benzylic monooxygenation followed by a nitrene-mediated rearrangement to form an oxime, which is further dehydrated to afford the nitrile. To the best of our knowledge, this is the first report of enzymatic oxidation of an alkyl azide to a nitrile. In addition, the described oxime-dehydration activity has not been reported for Rieske dioxygenases.

Comparison of mcl-Poly(3-hydroxyalkanoates) synthesis by different Pseudomonas putida strains from crude glycerol: citrate accumulates at high titer under PHA-producing conditions.

BACKGROUND: Achieving a sustainable society requires, among other things, the use of renewable feedstocks to replace chemicals obtained from petroleum-derived compounds. Crude glycerol synthesized inexpensively as a byproduct of biodiesel production is currently considered a waste product, which can potentially be converted into value-added compounds by bacterial fermentation. This study aimed at evaluating several characterized P. putida strains to produce medium-chain-length poly(3-hydroxyalkanoates) (mcl-PHA) using raw glycerol as the only carbon/energy source. RESULTS: Among all tested strains, P. putida KT2440 most efficiently synthesized mcl-PHA under nitrogen-limiting conditions, amassing more than 34% of its cell dry weight as PHA. Disruption of the PHA depolymerase gene (phaZ) in P. putida KT2440 enhanced the biopolymer titer up to 47% PHA (%wt/wt). The low biomass and PHA titer found in the mutant strain and the wild-type strain KT2440 seems to be triggered by the high production of the side-product citrate during the fermentation process which shows a high yield of 0.6 g/g. CONCLUSIONS: Overall, this work demonstrates the importance of choosing an appropriate microbe for the synthesis of mcl-PHA from waste materials, and a close inspection of the cell metabolism in order to identify undesired compounds that diminish the availability of precursors in the synthesis of biopolymers such as polyhydroxyalkanoates. Future metabolic engineering works should focus on reducing the production of citrate in order to modulate resource allocation in the cell's metabolism of P. putida, and finally increase the biopolymer production.

Biodegradation kinetics of o-cresol by Pseudomonas putida DSM 548 (pJP4) and o-cresol removal in a batch-recirculation bioreactor system

The biodegradation kinetics of o-cresol was examined by acclimatized P. putida DSM 548 (pJP4) in batch experiments at varying initial o-cresol concentrations (from 50 to 500 mg/L). The kinetic parameters of o-cresol aerobic biodegradation were estimated by using the Haldane substrate inhibition equation. The biodegradation kinetics of o-cresol was investigated. In batch culture reactors, the Maximum specific growth rate (μmax), Monod constant (Ks) and the inhibition constant (Ki) were established as 0.519 h-1, 223.84 mg/L and 130.883 mg/L, respectively. o-cresol biodegradation in a batch-recirculation bioreactor system by immobilized P. putida was also studied. The recycled packed bed reactor system, which was composed of Ca-alginate beads and pumice on which cells immobilized, has been performed to determine possible stability for further developments.

Marine Pseudomonas putida: a potential source of antimicrobial substances against antibiotic-resistant bacteria.

Bacteria isolated from marine sponges found off the coast of Rio de Janeiro, Brazil, were screened for the production of antimicrobial substances. We report a new Pseudomonas putida strain (designated P. putida Mm3) isolated from the sponge Mycale microsigmatosa that produces a powerful antimicrobial substance active against multidrug-resistant bacteria. P. putida Mm3 was identified on the basis of 16S rRNA gene sequencing and phenotypic tests. Molecular typing for Mm3 was performed by RAPD-PCR and comparison of the results to other Pseudomonas strains. Our results contribute to the search for new antimicrobial agents, an important strategy for developing alternative therapies to treat infections caused by multidrug-resistant bacteria.

Physiological role of phosphatidylcholine in the Pseudomonas putida A ATCC 12633 response to tetradecyltrimethylammonium bromide and aluminium.

AIMS: To evaluate the effect of tetradecyltrimethylammonium bromide (TTAB) and aluminium stresses on the phospholipid (PL) composition of Pseudomonas putida A ATCC 12633. METHODS AND RESULTS: Pseudomonas putida were grown with TTAB in the presence or absence of AlCl(3), and the PL composition was analysed. The presence of TTAB resulted in an increase in phosphatidylglycerol and phosphatidic acid levels (6- and 20-fold, respectively) with respect to the levels in cells grown without the surfactant. With AlCl(3), phosphatidylcholine (PC) increased (threefold) and cell-free extracts contained approximately threefold more phosphatidylcholine synthase activities than extracts without AlCl(3), indicating that the PC level is dependent upon activation of this enzyme. CONCLUSIONS: The negative charges of the headgroups of PL are the primary membrane-associated factors for the response to TTAB. PC are involved in cellular responses to binding Al(3+) and should be viewed as a temporary reservoir of available Al(3+) to allow a more efficient utilization of TTAB by Ps. putida. SIGNIFICANCE AND IMPACT OF THE STUDY: The changes in the PL of Ps. putida in the presence of TTAB and AlCl(3) indicate that different responses are utilized by bacteria to maintain optimal PL composition in the presence of such environmental pollutants.

Marine Pseudomonas putida: a potential source of antimicrobial substances against antibiotic-resistant bacteria

Bacteria isolated from marine sponges found off the coast of Rio de Janeiro, Brazil, were screened for the production of antimicrobial substances. We report a new Pseudomonas putida strain (designated P. putida Mm3) isolated from the sponge Mycale microsigmatosa that produces a powerful antimicrobial substance active against multidrug-resistant bacteria. P. putida Mm3 was identified on the basis of 16S rRNA gene sequencing and phenotypic tests. Molecular typing for Mm3 was performed by RAPD-PCR and comparison of the results to other Pseudomonas strains. Our results contribute to the search for new antimicrobial agents, an important strategy for developing alternative therapies to treat infections caused by multidrug-resistant bacteria.

Molecular structure of the lipoamide dehydrogenase domain of a surface antigen from Neisseria meningitidis.

The protein p64k from the surface of the Neisseria meningitidis bacteria has been characterized as a two-domain protein. It contains a dihydrolipoamide dehydrogenase domain of 482 residues, involving a FAD prosthetic group as a cofactor, and a smaller lipoic acid binding domain of 86 residues. The two domains are joined by a flexible segment rich in alanine and proline residues. The structure of the dihydrolipoamide dehydrogenase domain was determined by X-ray diffraction. It was solved by a combination of molecular replacement and multiple isomorphous replacement techniques and refined to 2.7 A resolution. In the crystal, the recombinant p64k mimics the functional homo-dimer by using one of the crystallographic 2-fold axes. The reactive disulphide bridge Cys161-Cys166 is in the oxidised state and the FAD is bound in an extended conformation. This main domain contains the major antigenic determinant of the protein, an extended loop of 32 residues at the surface of the protein. A mis-attribution at residue 553 in the sequence has been detected by inspection of electron density maps and the geometry. However, when compared to the other dihydrolipoamide dehydrogenases, there are some significant differences: (1) an unusual number of cis-proline residues and (2) a new motif built around a 2-fold axis by the sulphur atoms of residues Met558, Cys560 and their symmetry related equivalents.