Assembly mechanism and cryoEM structure of RecA recombination nucleofilaments from Streptococcus pneumoniae.

RecA-mediated homologous recombination (HR) is a key mechanism for genome maintenance and plasticity in bacteria. It proceeds through RecA assembly into a dynamic filament on ssDNA, the presynaptic filament, which mediates DNA homology search and ordered DNA strand exchange. Here, we combined structural, single molecule and biochemical approaches to characterize the ATP-dependent assembly mechanism of the presynaptic filament of RecA from Streptococcus pneumoniae (SpRecA), in comparison to the Escherichia coli RecA (EcRecA) paradigm. EcRecA polymerization on ssDNA is assisted by the Single-Stranded DNA Binding (SSB) protein, which unwinds ssDNA secondary structures that block EcRecA nucleofilament growth. We report by direct microscopic analysis of SpRecA filamentation on ssDNA that neither of the two paralogous pneumococcal SSBs could assist the extension of SpRecA nucleopolymers. Instead, we found that the conserved RadA helicase promotes SpRecA nucleofilamentation in an ATP-dependent manner. This allowed us to solve the atomic structure of such a long native SpRecA nucleopolymer by cryoEM stabilized with ATPγS. It was found to be equivalent to the crystal structure of the EcRecA filament with a marked difference in how RecA mediates nucleotide orientation in the stretched ssDNA. Then, our results show that SpRecA and EcRecA HR activities are different, in correlation with their distinct ATP-dependent ssDNA binding modes.

Active displacement of RecA filaments by UvrD translocase activity.

The UvrD helicase has been implicated in the disassembly of RecA nucleoprotein filaments in vivo and in vitro. We demonstrate that UvrD utilizes an active mechanism to remove RecA from the DNA. Efficient RecA removal depends on the availability of DNA binding sites for UvrD and/or the accessibility of the RecA filament ends. The removal of RecA from DNA also requires ATP hydrolysis by the UvrD helicase but not by RecA protein. The RecA-removal activity of UvrD is slowed by RecA variants with enhanced DNA-binding properties. The ATPase rate of UvrD during RecA removal is much slower than the ATPase activity of UvrD when it is functioning either as a translocase or a helicase on DNA in the absence of RecA. Thus, in this context UvrD may operate in a specialized disassembly mode.

Structural studies on Mycobacterium tuberculosis RecA: molecular plasticity and interspecies variability.

Structures of crystals of Mycobacterium tuberculosis RecA, grown and analysed under different conditions, provide insights into hitherto underappreciated details of molecular structure and plasticity. In particular, they yield information on the invariant and variable features of the geometry of the P-loop, whose binding to ATP is central for all the biochemical activities of RecA. The strengths of interaction of the ligands with the P-loop reveal significant differences. This in turn affects the magnitude of the motion of the 'switch' residue, Gln195 in M. tuberculosis RecA, which triggers the transmission of ATP-mediated allosteric information to the DNA binding region. M. tuberculosis RecA is substantially rigid compared with its counterparts from M. smegmatis and E. coli, which exhibit concerted internal molecular mobility. The interspecies variability in the plasticity of the two mycobacterial proteins is particularly surprising as they have similar sequence and 3D structure. Details of the interactions of ligands with the protein, characterized in the structures reported here, could be useful for design of inhibitors against M. tuberculosis RecA.

gEMfitter: a highly parallel FFT-based 3D density fitting tool with GPU texture memory acceleration.

Fitting high resolution protein structures into low resolution cryo-electron microscopy (cryo-EM) density maps is an important technique for modeling the atomic structures of very large macromolecular assemblies. This article presents "gEMfitter", a highly parallel fast Fourier transform (FFT) EM density fitting program which can exploit the special hardware properties of modern graphics processor units (GPUs) to accelerate both the translational and rotational parts of the correlation search. In particular, by using the GPU's special texture memory hardware to rotate 3D voxel grids, the cost of rotating large 3D density maps is almost completely eliminated. Compared to performing 3D correlations on one core of a contemporary central processor unit (CPU), running gEMfitter on a modern GPU gives up to 26-fold speed-up. Furthermore, using our parallel processing framework, this speed-up increases linearly with the number of CPUs or GPUs used. Thus, it is now possible to use routinely more robust but more expensive 3D correlation techniques. When tested on low resolution experimental cryo-EM data for the GroEL-GroES complex, we demonstrate the satisfactory fitting results that may be achieved by using a locally normalised cross-correlation with a Laplacian pre-filter, while still being up to three orders of magnitude faster than the well-known COLORES program.

Direct visualization of the formation of RecA/dsDNA complexes at the single-molecule level.

The assembly of RecA on linear dsDNA with ATPγS in the reaction was elucidated using atomic force microscopy (AFM) on a single-molecule level. It was found that assembly generally (∼95%) proceeded from a single nucleation site that started from one end of the DNA strand. About 5% of the complexes were formed starting either from both ends or from the middle of dsDNA strand. In all these cases, the RecA coating was contiguous for each region suggesting the binding of RecA to DNA is cooperative. The AFM observation provides direct experimental evidence to show how RecA binds to linear dsDNA in the presence of ATPγS.

Probing the dynamic differential stiffness of dsDNA interacting with RecA in the enthalpic regime.

RecA plays a central role in homologous recombination of DNA. When RecA combines with dsDNA to form RecA-dsDNA nucleofilament, it unwinds dsDNA and changes its structure. The unwinding length extension of a DNA segment interacting with RecA has been studied by various techniques, but the dynamic differential stiffness of dsDNA conjugating with RecA has not been well characterized. We applied oscillatory optical tweezers to measure the differential stiffness of dsDNA molecules, interacting with RecA, as a function of time at a constant stretching force of 33.6pN. The values of the differential stiffness of DNA (for stretching force in the range of 20.0pN to 33.6pN) measured by oscillatory optical tweezers, both before and after its interaction with RecA, are consistent with those measured by stationary optical tweezers. In the dynamic measurement, we have shown that the association (or binding) rate increases with higher concentration of RecA; besides, we have also monitored in real-time the dissociation of RecA from the stretched RecA-dsDNA filament as ATPgammaS was washed off from the sample chamber. Finally, we verified that RecA (I26C), a form of RecA mutant, does not affect the differential stiffness of the stretched DNA sample. It implies that mutant RecA (I26C) does not bind to the DNA, which is consistent with the result obtained by conventional biochemical approach.

Electrophoretic force on a protein-coated DNA molecule in a solid-state nanopore.

Using solid-state nanopores with optical tweezers, we perform force spectroscopy on DNA molecules that are coated with RecA proteins. We observe that the electrophoretic force is 2-4 times larger for RecA-DNA filaments than for uncoated DNA molecules and that this force increases at lower salt concentrations. The data demonstrate the efficacy of solid-state nanopores for locally probing the forces on DNA-bound proteins. Our results are described quantitatively by a model that treats the electrophoretic and hydrodynamic forces. The conductance steps that occur when RecA-DNA enters the nanopore change from conductance decreases at high salt to conductance increases at low salt, which allows the apparent charge of the RecA-DNA filament to be extracted. The combination of conductance measurements with local force spectroscopy increases the potential for future solid-state nanopore screening devices.

Electron microscopy of helical filaments: rediscovering buried treasures in negative stain.

Although negative stain electron microscopy is a wonderfully simple way of directly visualizing protein complexes and other biological macromolecules, the images are not really comparable to those of objects seen in everyday life. The failure to appreciate this has recently led to an incorrect interpretation of RecA-family filament structures.

The N-terminal domain of Escherichia coli RecA have multiple functions in promoting homologous recombination.

Escherichia coli RecA mediates homologous recombination, a process essential to maintaining genome integrity. In the presence of ATP, RecA proteins bind a single-stranded DNA (ssDNA) to form a RecA-ssDNA presynaptic nucleoprotein filament that captures donor double-stranded DNA (dsDNA), searches for homology, and then catalyzes the strand exchange between ssDNA and dsDNA to produce a new heteroduplex DNA. Based upon a recently reported crystal structure of the RecA-ssDNA nucleoprotein filament, we carried out structural and functional studies of the N-terminal domain (NTD) of the RecA protein. The RecA NTD was thought to be required for monomer-monomer interaction. Here we report that it has two other distinct roles in promoting homologous recombination. It first facilitates the formation of a RecA-ssDNA presynaptic nucleoprotein filament by converting ATP to an ADP-Pi intermediate. Then, once the RecA-ssDNA presynaptic nucleoprotein filament is stably assembled in the presence of ATPgammaS, the NTD is required to capture donor dsDNA. Our results also suggest that the second function of NTD may be similar to that of Arg243 and Lys245, which were implicated earlier as binding sites of donor dsDNA. A two-step model is proposed to explain how a RecA-ssDNA presynaptic nucleoprotein filament interacts with donor dsDNA.

RecA-mediated SOS induction requires an extended filament conformation but no ATP hydrolysis.

The Escherichia coli SOS response to DNA damage is modulated by the RecA protein, a recombinase that forms an extended filament on single-stranded DNA and hydrolyzes ATP. The RecA K72R (recA2201) mutation eliminates the ATPase activity of RecA protein. The mutation also limits the capacity of RecA to form long filaments in the presence of ATP. Strains with this mutation do not undergo SOS induction in vivo. We have combined the K72R variant of RecA with another mutation, RecA E38K (recA730). In vitro, the double mutant RecA E38K/K72R (recA730,2201) mimics the K72R mutant protein in that it has no ATPase activity. The double mutant protein will form long extended filaments on ssDNA and facilitate LexA cleavage almost as well as wild-type, and do so in the presence of ATP. Unlike recA K72R, the recA E38K/K72R double mutant promotes SOS induction in vivo after UV treatment. Thus, SOS induction does not require ATP hydrolysis by the RecA protein, but does require formation of extended RecA filaments. The RecA E38K/K72R protein represents an improved reagent for studies of the function of ATP hydrolysis by RecA in vivo and in vitro.

Atomic force microscopic study of low temperature induced disassembly of RecA-dsDNA filaments.

The assembly and disassembly of RecA-DNA nucleoprotein filaments on double-stranded DNA (dsDNA) or single-stranded DNA (ssDNA) are important steps for homologous recombination and DNA repair. The assembly and disassembly of the nucleoprotein filaments are sensitive to the reaction conditions. In this work, we investigated different morphologies of the formed nucleoprotein filaments at low temperature under different solution conditions by atomic force microscopy (AFM). We found that low temperature and long keeping time could induce the incomplete disassembly of the formed nucleoprotein filaments. In addition, when the formed filaments were kept at -20 degrees C for 20 h with 1,4-dithiothreitol (DTT), the integrated filaments disassembled. It was similar to the case under the same condition without anything added. However, when glycerol was used as a substitute for DTT, there was no obvious disassembly at the same condition. Oppositely, when the formed filaments were kept at 4 degrees C for 20 h, the disassembly with additional DTT was not as obvious as the case at -20 degrees C for 20 h, whereas the case with additional glycerol disassembled. The experiments indicated the effect of cold denaturation on the interaction of DNA and RecA. Meanwhile, the study of these phenomena can supply guidelines for the property and stability of RecA as well as the relevant roles of influencing factors to RecA and DNA in further theoretical studies.

Dynamic structures of Bacillus subtilis RecN-DNA complexes.

Genetic and cytological evidences suggest that Bacillus subtilis RecN acts prior to and after end-processing of DNA double-strand ends via homologous recombination, appears to participate in the assembly of a DNA repair centre and interacts with incoming single-stranded (ss) DNA during natural transformation. We have determined the architecture of RecN-ssDNA complexes by atomic force microscopy (AFM). ATP induces changes in the architecture of the RecN-ssDNA complexes and stimulates inter-complex assembly, thereby increasing the local concentration of DNA ends. The large CII and CIII complexes formed are insensitive to SsbA (counterpart of Escherichia coli SSB or eukaryotic RPA protein) addition, but RecA induces dislodging of RecN from the overhangs of duplex DNA molecules. Reciprocally, in the presence of RecN, RecA does not form large RecA-DNA networks. Based on these results, we hypothesize that in the presence of ATP, RecN tethers the 3'-ssDNA ends, and facilitates the access of RecA to the high local concentration of DNA ends. Then, the resulting RecA nucleoprotein filaments, on different ssDNA segments, might promote the simultaneous genome-wide homology search.

Liquid crystal formation of RecA-DNA filamentous complexes.

Spontaneous optical birefringence of RecA-bound linear and closed circular single-stranded DNA filaments, as well as RecA self-assembled polymer, was observed in aqueous buffer solutions, which demonstrates the formation of lyotropic liquid crystalline phases.

Mechanism for intein C-terminal cleavage: a proposal from quantum mechanical calculations.

Inteins are autocatalytic protein cleavage and splicing elements. A cysteine to alanine mutation at the N-terminal of inteins inhibits splicing and isolates the C-terminal cleavage reaction. Experiments indicate an enhanced C-terminal cleavage reaction rate upon decreasing the solution pH for the cleavage mutant, which cannot be explained by the existing mechanistic framework. We use intein crystal structure data and the information about conserved amino acids to perform semiempirical PM3 calculations followed by high-level density functional theory calculations in both gas phase and implicit solvent environments. Based on these calculations, we propose a detailed "low pH" mechanism for intein C-terminal cleavage. Water plays an important role in the proposed reaction mechanism, acting as an acid as well as a base. The protonation of the scissile peptide bond nitrogen by a hydronium ion is an important first step in the reaction. That step is followed by the attack of the C-terminal asparagine side chain on its carbonyl carbon, causing succinimide formation and simultaneous peptide bond cleavage. The computed reaction energy barrier in the gas phase is approximately 33 kcal/mol and reduces to approximately 25 kcal/mol in solution, close to the 21 kcal/mol experimentally observed at pH 6.0. This mechanism is consistent with the observed increase in C-terminal cleavage activity at low pH for the cleavage mutant of the Mycobacterium tuberculosis RecA mini-intein.

Atomic force microscopic study of aggregation of RecA-DNA nucleoprotein filaments into left-handed supercoiled bundles.

RecA and its complexes with double-stranded DNA (dsDNA) and single-stranded DNA (ssDNA) are responsible for homologous recombination and DNA repair. In this study, we have observed, by atomic force microscopy (AFM), two-filament left-handed superhelices of RecA-dsDNA filaments that further interwind into four- or six-filament bundles, in addition to previously reported left-handed bundles of three or six filaments. Also revealed are four-filament bundles formed by further interwinding of two intrafilament superhelices of individual filaments. Pitches of superhelices of RecA-DNA filaments are similar to each other regardless the number of component filaments, and those formed on Phix174 RFII dsDNA and pNEB206A dsDNA are measured as 339.3 +/- 6.2 nm (690 counts of pitch/2) and 321.6 +/- 11.7 nm (101 counts of pitch/2), respectively, consistent with earlier measurements made by electron microscopy with a much smaller sample size. The study of these structures provides insight into the self-interactions of RecA and RecA-like proteins, which are present in all living cells, and into the general phenomenon of bundling, which is relevant to both biological and nonbiological filaments.

Fission yeast rad51 and dmc1, two efficient DNA recombinases forming helical nucleoprotein filaments.

Homologous recombination is important for the repair of double-strand breaks during meiosis. Eukaryotic cells require two homologs of Escherichia coli RecA protein, Rad51 and Dmc1, for meiotic recombination. To date, it is not clear, at the biochemical level, why two homologs of RecA are necessary during meiosis. To gain insight into this, we purified Schizosaccharomyces pombe Rad51 and Dmc1 to homogeneity. Purified Rad51 and Dmc1 form homo-oligomers, bind single-stranded DNA preferentially, and exhibit DNA-stimulated ATPase activity. Both Rad51 and Dmc1 promote the renaturation of complementary single-stranded DNA. Importantly, Rad51 and Dmc1 proteins catalyze ATP-dependent strand exchange reactions with homologous duplex DNA. Electron microscopy reveals that both S. pombe Rad51 and Dmc1 form nucleoprotein filaments. Rad51 formed helical nucleoprotein filaments on single-stranded DNA, whereas Dmc1 was found in two forms, as helical filaments and also as stacked rings. These results demonstrate that Rad51 and Dmc1 are both efficient recombinases in lower eukaryotes and reveal closer functional and structural similarities between the meiotic recombinase Dmc1 and Rad51. The DNA strand exchange activity of both Rad51 and Dmc1 is most likely critical for proper meiotic DNA double-strand break repair in lower eukaryotes.

Cooperativity and intermediate structures of single-stranded DNA binding-assisted RecA-single-stranded DNA complex formation studied by atomic force microscopy.

The formation of a complex between RecA protein and single-stranded (ss) DNA was studied systematically by atomic force microscopy (AFM) by varying incubation time and the molecular ratio of RecA protein to single-stranded DNA binding (SSB) protein. New intermediate structures, such as small circular, tangled, and protruded structures in the absence of SSB and sharply turned structures in the presence of SSB, were clearly identified at the early stage of complex formation. These structures have probably resulted from competitive binding of RecA and SSB to DNA. After long incubation, only fully covered RecA-ssDNA and totally RecA-free SSB-ssDNA complexes were present regardless of RecA concentrations. Together with intermediate structures which consisted of only two parts, that is, ssDNA covered by SSB and by RecA proteins, the observation suggested strong neighbor cooperative binding of RecA to ssDNA assisted by SSB.

Direct observation of the assembly of RecA/DNA complexes by atomic force microscopy.

The formation of the RecA/DNA nucleofilament on nicked circular double stranded (ds) DNA in the presence of ATPgammaS was studied using the atomic force microscope (AFM) at nanometer resolution. The AFM allowed simultaneous observation of both dsDNA substrate and RecA protein-coated sections such that they are highly distinguishable. Using a time series of images, the complex formation was monitored. AFM imaging provided direct evidence that assembly of the nucleofilaments occurs via a nucleation and growth mechanism. The nucleation step is much slower than the growth phase, as demonstrated by the predominance of naked dsDNA at early and middle time points, followed by the rapid appearance of partially then fully formed complexes. Observation of the formation of nucleation sites without accompanying growth on unnicked dsDNA enabled an estimate of the nucleation rate, of 5 x 10(-5) RecA min(-1) bp(-1). The published model for the analysis of RecA assembly on dsDNA deduces a single kinetic parameter that prevents the separate determination of nucleation rate and growth rate. By directly measuring the nucleation rate with the AFM, this model is employed to determine a growth rate of 202 min(-1). These AFM results provide the first direct evidence of previous results on complex formation obtained only by indirect means.

What is the structure of the RecA-DNA filament?

The bacterial RecA protein has been a model system for understanding how a protein can catalyze homologous genetic recombination. RecA-like proteins have now been characterized from many organisms, from bacteriophage to humans. Some of the RecA-like proteins, including human RAD51, appear to function as helical filaments formed on DNA. However, we currently have high resolution structures of inactive forms of the protein, and low resolution structures of the active complexes formed by RecA-like proteins on DNA in the presence of ATP or ATP analogs. Within a crystal of the E. coli RecA protein, a helical polymer exists, and it has been widely assumed that this polymer is quite similar to the active helical filament formed on DNA. Recent developments have suggested that this may not be the case.