Improving Low-Density Fat by Condensing Cellular and Collagen Content through a Mechanical Process: Basic Research and Clinical Applications.

BACKGROUND: Large-volume fat grafting results in high absorption and complication rates. Low-density fat includes small numbers of viable cells and considerable oil, resulting in nodules and oil cysts. This study evaluated a strategy for large-volume fat grafting using a mechanical process to condense low-density fat and transplanting it with high-density fat. METHODS: Low-density fat, defined as the upper half of centrifuged lipoaspirates, was emulsified by intersyringe shifting and centrifuged to obtain condensed low-density fat. Fresh condensed low-density fat was analyzed by counting cells in the stromal vascular fraction, and by electron scanning and Western blotting. The retention rate and histologic changes of the product were analyzed using a fat grafting model in nude mice. Transplantation with a combination of condensed low-density fat and high-density fat was tested in patients undergoing breast reconstruction and breast augmentation. RESULTS: The condensed low-density fat derived from low-density fat contained a large number of stromal vascular fraction cells and collagens, comparable to that of high-density fat and much higher than in low-density fat and Coleman fat. Retention rates 12 weeks after transplantation were higher for condensed low-density fat (55.0 ± 7.5 percent) than for low-density fat (31.1 ± 5.7 percent) and Coleman fat (41.1 ± 6.8 percent), with condensed low-density fat having fewer oil cysts and lower macrophage infiltration. Patients grafted with combined condensed low-density fat and high-density fat showed good long-term volume retention. CONCLUSIONS: Using mechanical methods to condense low-density fat to a level comparable to that of high-density fat is a practical method of improving fat graft retention and avoiding severe complications. This new strategy may improve the quality of lipoaspirates for patients requiring large-volume augmentation.

Robotic DIEP Flap Harvest through a Totally Extraperitoneal Approach Using a Single-Port Surgical Robotic System.

SUMMARY: Deep inferior epigastric artery perforator (DIEP) flap surgery is one of the most common techniques for breast reconstruction using abdominal tissue. Although the DIEP flap reduces donor-site morbidity when compared with the conventional free transverse rectus abdominis musculocutaneous flap, violation of the anterior rectus sheath, rectus muscle, and motor nerves cannot be avoided. To further minimize tissue damage in the donor site, the use of a surgical robotic system for DIEP flap harvest with a totally extraperitoneal approach has been suggested. This totally extraperitoneal approach has a long learning curve because of the narrow preperitoneal space and the difficulty of converting a potential space to an actual space. Thus, the authors suggest a single-port robotic system optimized for narrow surgical spaces as a feasible option for DIEP flap harvest by a totally extraperitoneal approach, which has a shorter learning curve.

Protection From the Second Warm Ischemic Injury in Kidney Transplantation Using an Ex Vivo Porcine Model and Thermally Insulating Jackets.

BACKGROUND: Kidney transplantation is the optimum treatment for kidney failure in carefully selected patients. Technical surgical complications and second warm ischemic time (SWIT) increase the risk of delayed graft function (DGF) and subsequent short- and long-term graft outcomes including the need for post-transplant dialysis and graft failure. Intraoperative organ thermal regulation could reduce SWIT, minimizing surgical complications due to time pressure, and limiting graft ischemia-reperfusion injury. METHODS: A novel ischemic-injury thermal protection jacket (iiPJ) was designed and fabricated in silicone composite and polyurethane (PU) elastomer prototypes. Both were compared with no thermal insulation as controls. Time to reach ischemic threshold (15°C) and thermal energy transfer were compared. A water bath model was used to examine the thermal protective properties of porcine kidneys, as a feasibility study prior to in vivo translation. RESULTS: In both iterations of the iiPJ, the time taken to reach the warm ischemia threshold was 35.2 ± 1.4 minutes (silicone) and 38.4 ± 3.1 minutes (PU), compared with 17.2 ± 1.5 minutes for controls (n = 5, P < .001 for both comparisons). Thermal energy transfer was also found to be significantly less for both iiPJ variants compared with controls. There was no significant difference between the thermal performance of the 2 iiPJ variants. CONCLUSION: Protection from SWIT by using a protective insulation jacket is feasible. With clinical translation, this novel strategy could facilitate more optimal surgical performance and reduce transplanted organ ischemia-reperfusion injury, in particular the SWIT, potentially affecting delayed graft function and long-term outcomes.

A protocol for rat kidney normothermic machine perfusion and subsequent transplantation.

End-stage renal disease is a major global health burden. The only definitive treatment existing is renal transplantation. Worldwide, the demand for donated kidneys by far exceeds the supply. A novel technique for organ preservation, normothermic machine perfusion (NMP), now promises to increase the potential pool of available organs by extending the spectrum of donors and reducing the incidence of graft failure. First studies in humans and large animals are being performed with promising results, but refinement of the technique, buffer, and machines involved is labor-intensive and expensive. To our knowledge, this is the first report of a small animal model of NMP and subsequent transplantation.

Feasibility of bilateral internal thoracic artery harvesting using the da Vinci SP system.

PURPOSE: We conducted this study to investigate the feasibility of mobilizing the bilateral internal thoracic arteries (ITAs) using the da Vinci SP through a single intercostal incision and to compare the amount of rib spreading with that required for mini-thoracotomy procedures. We also evaluated the construction of an intrathoracic T-graft anastomosis using existing instrumentation of the SP system. METHODS: We harvested bilateral ITAs from two male cadavers via a single incision made in the fifth intercostal space using the da Vinci SP. A T-graft end-to-side anastomosis was created in one cadaver. RESULTS: The bilateral ITAs were harvested in less than 60 min and a T-graft was completed. No additional rib spreading was required. Intraoperative adjustments of the da Vinci SP were necessary to maintain alignment with the surgical targets. CONCLUSIONS: Bilateral ITA harvest using the da Vinci SP through a single intercostal incision was feasible, with less rib spreading than in mini-thoracotomy procedures. Thus, creating an intrathoracic T-graft with the existing da Vinci SP instruments is possible.

A Case Series of Robot-assisted Rectus Abdominis Flap Harvest for Pelvic Reconstruction: A Single Institution Experience.

STUDY OBJECTIVE: To analyze outcomes and postoperative complications in patients undergoing robot-assisted rectus abdominis flap harvest for pelvic floor reconstruction. DESIGN: Case series. SETTING: Academic setting. PATIENTS: Pelvic reconstruction surgery patients. INTERVENTIONS: The rectus abdominis muscle flap can be used as a flap for pelvic reconstruction, providing a large volume of soft tissue that can be used in the treatment of many comorbid conditions, including genital fistulas, postradiation pelvic exenteration, and abdominoperineal resection defects. Intraperitoneal harvest of the rectus muscle using a robotic approach allows avoidance of laparotomy and subsequent disruption of the anterior rectus sheath, thus preserving the integrity of the abdominal wall. MEASUREMENTS AND MAIN RESULTS: A retrospective analysis of patient demographic and clinical characteristics was performed for all patients who underwent robot-assisted rectus abdominis flap harvest for pelvic floor reconstruction at our institution from October 1, 2016, to October 31, 2018. The postoperative complications analyzed included bowel obstructions, surgical site infections, emergency room visits, and need for readmission. Six patients (4 women and 2 men), with a mean age of 69.2 years (range = 57-79 years) and median follow-up time of 9.2 months (range = 5-12 months), were included. Muscle flap harvest was performed on the right side in 4 patients and on the left in 2 patients. The indications for reconstructive surgery included vesicovaginal fistula, complex pelvic organ prolapse, anterior and posterior exenteration, partial and total vaginectomy, partial vulvectomy, and abdominoperineal resection. Two patients received neoadjuvant chemoradiation. One of the 6 cases was converted to laparotomy; however, this was not owing to the rectus harvest. Three patients experienced no complications after reconstruction; 1 patient reported occasional abdominal pain; 1 patient had intermittent bowel obstruction; and 1 patient developed a pelvic abscess, requiring readmission. All 6 patients achieved satisfactory healing of the pelvic wound after robot-assisted rectus abdominis flap inset. CONCLUSION: Robot-assisted rectus abdominis flap harvest for pelvic floor reconstruction is a reliable means of defect closure, despite the presence of substantial comorbidities and risk factors in this patient cohort. Patient selection and counseling are crucial to optimize surgical outcomes in this complex population.

A New Device for Autologous Small Volume Fat Grafting.

BACKGROUND: Many techniques and devices have been developed to improve small volume fat grafting efficiency and consistency for use in the operating room and outpatient procedure room. These methods require cumbersome or messy processing to remove excess oil and fluid from adipose graft. OBJECTIVES: The aim of this study was to compare the fat processing efficiency of a novel handheld device, the Push-to-Spin (P2S) system, with that of other common processing techniques and validate tissue quality after lipoaspirate processing. METHODS: Human lipoaspirate samples were processed by 1 of 3 methods: cotton gauze (Telfa) rolling, centrifugation (Coleman technique), or the P2S system. Efficiency of fat processing was evaluated in terms of total processing time, fat harvest ratio, and fat processed ratio. Histologic examination and immunohistochemical staining were used to compare tissue morphology and adipocyte viability, respectively. Experimental samples were compared with unprocessed lipoaspirate controls. RESULTS: Lipoaspirate processing was significantly faster with the P2S device than with other techniques. All 3 methods achieved similar fat harvest and fat processing ratios. Additionally, the P2S, Telfa, and Coleman techniques yielded grafts with similar cellularity and with similar perilipin and glycerol-3-phosphate dehydrogenase 1 expression. Measured differences between experimental and control samples were statistically significant. CONCLUSIONS: The P2S device is an easy-to-use, efficient, and potentially cost-effective handheld device that can be used for lipoaspirate harvest, processing, and grafting in any procedural setting. The resulting adipocytes have similar morphology, viability, and function to those yielded by other techniques. This handheld technology decreases procedure time, thereby improving surgeon efficiency and patient experience.

Clips Can be Safely Used for Vascular Control of the Renal Vessels During Laparoscopic Donor Nephrectomy.

OBJECTIVE: To review our experience using clips to control the renal vessels during laparoscopic donor nephrectomy (LDN) and determine the safety of this practice. METHODS: We performed a retrospective review of patients who underwent LDN at our centre January 1, 2007-September 17, 2019. The primary outcome was the rate of complication associated with vascular control of the renal vessels, which included (1) conversion to open to manage bleeding, (2) additional procedures for bleeding, and (3) major bleeding requiring blood transfusion. Secondary outcomes included the rate of renal artery/vein clip dislodgement or crossing, change in hemoglobin, warm ischemia time and the incidence of intra-operative complications and postoperative in-hospital complications. RESULTS: We included 503 patients who underwent LDN, of which 497 were left sided. The main renal artery was controlled with 3 titanium clips in 489 (97%) cases. The main renal vein was controlled with 2 polymer-locking clips in 478 (95%) cases. For our primary outcome, there were no conversions to open to manage bleeding, no secondary procedures due to bleeding and no major bleeding requiring blood transfusion. Additionally, there were no donor deaths. Regarding our secondary outcomes, there were 5 intraoperative events related to the titanium clips being placed on the renal artery and 1 intraoperative event related to the polymer-locking clips on the renal vein, none of which resulted in any morbidity. CONCLUSION: Using 3 titanium clips on the renal artery and 2 polymer-locking clips on the renal vein during left LDN is safe and provides excellent vascular control.

Minimal Access Tendon Harvesting without a Harvester: A Cheap and Effective Alternative Technique Using a Plastic Yankauer Suction Tip.

Tendon grafting is a key component of hand reconstructive procedures. Commercially produced tendon harvesters facilitate this grafting process but are not always available. We present an innovative technique that allows tendon harvest to be undertaken using equipment readily available in all hospitals. Only a scalpel blade and a plastic Yankauer suction tip are required. Two simple and rapid modifications are made to the suction tip using the blade prior to its use. The described tool has been conceived, refined and used successfully by the authors, without complications, and allows tendon harvest via the standard minimally invasive approach associated with a conventional harvester. Creating this improvised harvester is neither challenging nor time-consuming, and this cheap and effective substitute allows tendon grafts to be harvested using a minimal access approach in environments where a traditional harvester is not available, or not sterile.

Comparison of Telfa Rolling and a Closed Washing System for Autologous Fat Processing Techniques in Postmastectomy Breast Reconstruction.

BACKGROUND: The purpose of this study was to compare the commonly used fat grafting techniques-Telfa rolling and a closed washing system-in breast reconstruction patients. METHODS: Consecutive patients undergoing fat grafting were retrospectively reviewed and grouped by technique. Patients with less than 180 days of follow-up were excluded. Demographics, operative details, and complications were compared using univariate analysis with significance set at p < 0.05. RESULTS: Between January of 2013 and September of 2017, 186 women underwent a total of 319 fat grafting procedures. There was no difference in demographics, number of procedures performed, volume of fat grafted, and number of days after reconstruction that fat grafting was performed between groups (p > 0.05). Telfa rolling patients had longer operative times for second fat grafting procedures (implant exchange often completed prior) [100.0 minutes (range, 60.0 to 150.0 minutes) versus 79.0 minutes (range, 64.0 to 94.0 minutes); p = 0.03]. Telfa rolling breasts had more palpable masses requiring imaging (26.0 percent versus 14.4 percent; p = 0.01) and an increased incidence of fat necrosis (20.6 percent versus 8.0 percent; p < 0.01). The closed washing system was found to be an independent predictor of decreased rates of imaging-confirmed fat necrosis (OR, 0.29; p = 0.048). There was no difference in fat necrosis excision or cancer recurrence between the groups. CONCLUSION: The closed washing system was independently associated with decreased rates of imaging-confirmed fat necrosis compared to Telfa rolling without an increase in other complications. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, III.

Follicular Unit Excision Punches and Devices.

BACKGROUND: Follicular unit excision (FUE) is used to harvest follicular units for hair transplantation using trephine punches. The characteristics of FUE punches can impact the success of this technique; thus, many innovative punch designs and devices have been developed. With many options available, it can be difficult for the hair restoration surgeon to know which punch best suits the needs of their patients. OBJECTIVE: To provide a comprehensive review of punch shapes and devices available. METHODS: Search of PubMed, reference mining of relevant publications, and hand searching trade publications. RESULTS: We examined FUE punches and devices and consolidated descriptive information for each to create textual and visual guides. No single punch shape or device may suit all cases; thus, it is important to know the best uses and limitations of each. CONCLUSION: The surgeon should have a comprehensive knowledge base of available punch shapes and devices and understand the advantages and disadvantages of each. It is also beneficial to have an in-depth knowledge of skin properties and follicular unit structure. Ultimately, understanding the dynamics behind punch excision will enhance the FUE technique.

"POMELO PROJECT" - a simple and low cost simulator for harvesting skin graft by plastic surgery residents.

BACKGROUND: Harvesting partial thickness skin grafts is an important technical skill the training plastic surgeon is required to hone. Historically accomplished via manual dermatome (Humby's knife) or the modern day electric dermatome. OBJECTIVE: Presenting a means of practicing the use of Humby's knife for novice surgeons. METHODS: 15 plastic surgeons comprising 8 seniors and 7 residents, in a single tertiary center participated. Each utilised a Humby knife to harvest 4 skin grafts from a Pomelo. The graft areas were measured via computerised image processing, comparing measures of graft harvest consistency across groups of surgeons. RESULTS: In the resident surgeon group, the average relative difference between exact graft area and encompassing area was 0.45, as compared with 0.15 in the Senior surgeon group, indicating a greater degree of inconsistency in graft harvest. Comparisons across groups yielded significant differences per each of the 4 grafts harvested (p <=0.005). LIMITATIONS: single center and small cohort (inherent to the sparsity of plastic surgeons), marginal statistical evidence. CONCLUSIONS: Citrus Maxima (Pomelo) is a useful substrate to instruct and practice the use of Humby knife effectively, allowing novice surgeons to practice the manual manoeuvres required therefore as well as increase confidence in its subsequent operative use.

Ultrastructural Investigations of Arterial Bypass Conduits after the Use of Different Harvesting Techniques Using an Electron Microscope.

OBJECTIVES: The aim of this study was to perform morphometric analysis of arterial conduits harvested by harmonic scalpel in coronary artery bypass grafting (CABG) patients. METHODS: From 100 CABG patients, 200 arterial conduits-100 radial arteries (RAs) and 100 left internal thoracic artery (LITAs)-were harvested. The patients had similar characteristics (mean age, sex ratio, comorbidities, etc.). We divided the patients into 2 groups according to harvesting technique. In group 1, a harmonic scalpel was used in 50 patients for harvesting arterial conduits (50 LITA and 50 RA). In group 2, conduits were harvested using low-voltage electrocautery. To prevent side effects of clipping, all conduits in both groups remained in perfused condition until anastomosis. A 10-mm length of conduit was cut for transmission electron microscopy investigation. We calculated duration of harvesting, blood flow changes, and histopathologic changes of the conduits according to a vessel scoring system. RESULTS: In the harmonic scalpel group, we detected pathologic findings-corruption of endothelial integrity, subendothelial damage, and endothelial pathology-in 5 specimens (10%) (3 LITA  [6%] and 2 RA [4%]). In group 2, pathologic findings were detected in 16 conduits (32%; 11 LITA, 22%, and 5 RA, 10%). Endothelial dissection, subendothelial disarrangement, cellular separation due to intercellular edema, and subadventitial hematoma were the main pathologic changes in the classic harvesting method. There was a significant difference between the groups (P = .001). Harvesting time of LITA was nearly similar in both groups: 26.9 ± 11.1 min (range 25-38) in group 1 and 21.3 ± 8.6 min (range 21-25) in group 2 (P = .049). RA harvesting time was significantly shorter with the harmonic scalpel technique (20.3 ± 3.9 versus 27.6 ± 5.4 min, P = .022). The blood flow of the conduits was similar, with no statistical difference for the 2 arterial conduits (LITA, P = .76; RA, P = .55). CONCLUSION: In the learning curve period, the use of a harmonic scalpel is time consuming and presents some difficulties during the harvesting of conduits. According to our study results, however, the harmonic scalpel technique may be useful because of decreased pathology, including spasm. In our opinion, graft occlusion or thrombus as a life-threatening condition and endothelial dysfunction may decrease with the use of this alternative harvesting technique.

Harvest of the right gastroepiploic artery graft using a novel hybrid ultrasonic/bipolar energy device.

BACKGROUND: The right gastroepiploic artery (RGEA) is a useful in-situ graft, and skeletonization is effective to prevent spasm and achieve good patency. To harvest the skeletonized RGEA easily, ultrasonic scalpel has been widely used, but the tip shape of conventional ultrasonic device was not optimal for this procedure. Recently, a novel hybrid ultrasonic/bipolar energy device (THUNDERBEAT Open Fine Jaw [TOFJ]) has been developed and is widely used in general surgery. SURGICAL TECHNIQUE: The operator holds forceps in left hand and TOFJ in right hand, incises the anterior layer of the omentum, and extends the incision distally along the RGEA. The side branches and satellite veins were sealed and cut. Because the tip of the TOFJ is well-designed to easily grasp and peel off the tissue, there is no need to change instruments throughout the procedure. After the dissection was advanced distally, the proximal side was subsequently dissected. CONCLUSIONS: This novel device is useful for harvesting skeletonized RGEA.

Laparoscopic myomectomy using self-made retrieval bag to contain tissue extraction.

OBJECTIVE: To introduce an effective approach using a self-made retrieval bag during laparoscopic myomectomy to contain tissue extraction. DESIGN: Step-by-step video explanation of the surgical procedure with still pictures and surgical video clips to demonstrate the detailed technique, approved by the Shengjing Hospital of China Medical University. SETTING: University hospital. PATIENT(S): A 32-year-old woman diagnosed with a uterine myoma (diameter, 6 cm). She had endured 5 years of intermittent lower abdominal pain and 2 years of infertility. INTERVENTION(S): A self-made retrieval bag during laparoscopic myomectomy was used (consists of four steps) to contain tissue extraction. 1. Self-made retrieval bag using a sterile medical bag. 2. Inspect the pelvic cavity, evaluate and determine the location and number of myomas. 3. Resect the myoma. 4. Morcellate the myoma into pieces inside the retrieval bag using laparoscopic power morcellation. MAIN OUTCOME MEASURE(S): Value and feasibility of using a self-made retrieval bag in laparoscopic myomectomy. RESULT(S): The myoma was successfully and completely resected by laparoscopy using a self-made retrieval bag to contain tissue extraction. Operative time was 93 minutes. In the follow-up period, the patient did not report any symptom of iatrogenic parasitic myoma. The woman had a pregnancy at month 26 after operation and underwent a cesarean section. This resulted in a full-term baby. CONCLUSION(S): Our surgical approach demonstrated a number of noteworthy advantages. The use of retrieval bag to contain tissue extraction during laparoscopic morcellation can avoid the risk of iatrogenic parasitic myoma. The retrieval bag is self-made using a sterile packing bag, which is cost free and also reduces operative expenses.

Randomized Trial of 2 Endoscopic Radial Artery Harvesting Devices-Immunofluorescence Assessment.

BACKGROUND: Various devices are available for endoscopic radial artery harvesting during coronary artery bypass grafting. Thermal spread and graft damage, however, are common concerns. The aim of this study was to compare the MiFusion TLS2 system (Endotrust, Nettetal Germany) with direct heat technique and the LigaSure Maryland system (Medtronic, Dublin, Ireland) using advanced bipolar technique in a prospective randomized study. METHODS: One hundred consecutive patients undergoing coronary artery bypass grafting with endoscopic radial artery harvesting were prospectively included and randomized 1:1. The proximal (brachial) ends of the grafts were analyzed using fluorescence microscopy with focus on graft integrity. In addition, harvesting time, graft sealing, residual bleeding, and incidence of neurological disorders were compared. RESULTS: Patient age was 67 ± 8 years. Mean harvesting time was 26.5 ± 9 minutes for the TLS2 and 23.2 ± 8 minutes for the LigaSure (P = .049). Overall graft integrity was good in both groups. A significantly better graft integrity was observed in the LigaSure group (scale 0 to 3; 3 = best) with 2.5 ± 0.6 for TLS2 and 2.8 ± 0.4 for LigaSure (P = .031). LigaSure provided significantly better graft sealing (scale 0 to 2; 0 = best) with 0.6 ± 0.7 vs 1.0 ± 0.6 (TLS2) (P = .006) and less residual bleeding (scale 1 to 5; 1 = best) with 1.4 ± 0.6 vs 2.0 ± 0.9 (TLS2) (P < .001). Transient sensibility disorders were less frequently observed with LigaSure (2% vs 16%, P = .015). CONCLUSIONS: Endoscopic radial artery harvesting can be performed with excellent results and good graft integrity using both devices. Compared with the MiFusion TLS2, the LigaSure device led to faster procedural times and resulted in better graft integrity. Along with providing a better seal, LigaSure was associated with less sensibility disorders.