Visualization and correlation of drug release of risperidone/clozapine microspheres in vitro and in vivo based on FRET mechanism.

This study addresses the challenging task of quantitatively investigating drug release from PLGA microspheres after in vivo administration. The objective is to employ Förster resonance energy transfer (FRET) to visualize drug-encapsulated microspheres in both in vitro and in vivo settings. The primary goal is to establish a quantitative correlation between FRET fluorescence changes and microsphere drug release. The study selects drugs with diverse structures and lipid solubility to explore release mechanisms, using PLGA as the matrix material. Clozapine and risperidone serve as model drugs. FRET molecules, Cy5 and Cy5.5, along with Cy7 derivatives, create FRET donor-acceptor pairs. In vitro results show that FRET fluorescence changes align closely with microsphere drug release, particularly for the Cy5.5-Cy7 pair. In vivo experiments involve subcutaneous administration of microspheres to rats, tracking FRET fluorescence changes while collecting blood samples. Pharmacokinetic studies on clozapine and risperidone reveal in vivo absorption fractions using the Loo-Riegelman method. Correlating FRET and in vivo absorption data establishes an in vitro-in vivo relationship (IVIVR). The study demonstrates that FRET-based fluorescence changes quantitatively link to microsphere drug release, offering an innovative method for visualizing and monitoring release in both in vitro and in vivo settings, potentially advancing clinical applications of such formulations.

Reverse engineering of Perseris and development of compositionally equivalent formulations.

Six injectable, long-acting in situ forming implant drug products based on poly(lactide-co-glycolide) (PLGA) and N-Methyl-2-Pyrrolidone (NMP) are available on the market. However, generic products, which would likely be more affordable for patients, are not yet available. This is partially due to the unique complexity of these formulations as well as the inherent heterogeneity of PLGA and the challenges in the manufacture and characterization of this polymer. This article focuses on a comprehensive characterization of Perseris (risperidone) in situ forming implant drug product, and the development of compositionally equivalent formulations. The molecular weight (MW), lactide/glycolide (L/G) ratio, end group, blockiness and glass transition temperature (Tg) of PLGA, as well as the crystal form and particle size of risperidone powder used in Perseris were identified through reverse engineering. The dissolved/suspended drug ratio in the final implant suspension for administration, as well as the real-time drug solid state in the solidified Perseris drug depot were investigated. Two compositionally equivalent formulations prepared using customized PLGA polymers with similar properties to the Perseris PLGA showed similar in vitro release and swelling behavior to Perseris as demonstrated using a novel adapter-based dissolution method. The novelty of this dissolution method lies in its ability to control implant shape, generate reproducible data, distinguish different release phases, as well as identify formulation changes. The knowledge gained in this work and the methodology established for characterization of the implant formulations are important for implant formulation development.

Drug Repurposing: Deferasirox Inhibits the Anti-Apoptotic Activity of Mcl-1.

INTRODUCTION: With the aim of repositioning commercially available drugs for the inhibition of the anti-apoptotic myeloid cell leukemia protein, Mcl-1, implied in various cancers, five molecules, highlighted from a published theoretical screening, were selected to experimentally validate their affinity toward Mcl-1. RESULTS: A detailed NMR study revealed that only two of the five tested drugs, Torsemide and Deferasirox, interacted with Mcl-1. NMR data analysis allowed the complete characterization of the binding mode of both drugs to Mcl-1, including the estimation of their affinity for Mcl-1. Biological assays evidenced that the biological activity of Torsemide was lower as compared to the Deferasirox, which was able to efficiently and selectively inhibit the anti-apoptotic activity of Mcl-1. Finally, docking and molecular dynamics led to a 3D model for the Deferasirox:Mcl-1 complex and revealed the positioning of the drug in the Mcl-1 P2/P3 pockets as well as almost all synthetic Mcl-1 inhibitors. Interestingly, contrary to known synthetic Mcl-1 inhibitors which interact through Arg263, Deferasirox, establishes a salt bridge with Lys234. CONCLUSION: Deferasirox could be a potential candidate for drug repositioning as Mcl-1 inhibitor.

Main interactions of dopamine and risperidone with the dopamine D2 receptor.

Psychosis is one of the psychiatric disorders that is controlled by dopaminergic drugs such as antipsychotics that have affinity for the dopamine D2 receptor (DRD2). In this investigation we perform quantum chemical calculations of two molecules [dopamine and risperidone] within a large cavity of DRD2 that represents the binding site of the receptor. Dopamine is an endogenous neurotransmitter and risperidone is a second-generation antipsychotic. Non-covalent interactions of dopamine and risperidone with DRD2 are analyzed using the Quantum Theory of Atoms in Molecules (QTAIM) and the Non-Covalent Interaction index (NCI). The QTAIM results show that these molecules strongly interact with the receptor. There are 22 non-covalent interactions for dopamine and 54 for risperidone. The electron density evaluated at each critical binding point is small in both systems but it is higher for dopamine than for risperidone, indicating that the interactions of DRD2 with the first are stronger than with the second molecule. However, the binding energy is higher for risperidone (-72.6 kcal mol-1) than for dopamine (-22.8 kcal mol-1). Thus, the strength of the binding energy is due to the number of contacts rather than the strength of the interactions themselves. This could be related to the ability of risperidone to block DRD2 and may explain the efficacy of this drug for controlling the symptoms of schizophrenia, but likewise its secondary effects.

Interaction of graphene with antipsychotic drugs: Is there any charge transfer process?

Antipsychotics represent an effective therapy for schizophrenia (a chronic mental disorder). Their benefits are related to the interaction of the drugs with dopamine D2 receptor (D2R). Antipsychotics are classified as agonists or antagonists. One of the working hypotheses is that there is a charge transfer process between the drugs and the receptors, which is different for agonists and antagonists. To have more insight into the nature of the interaction of these molecules and the differences between agonists and antagonists, we analyze the interaction of graphene with three molecules: dopamine, pramipexole (an agonist of dopamine), and risperidone (an antagonist of dopamine). The idea is to use graphene as a simple model to analyze the charge transfer process of these three drugs. Optimized structures, atomic charges, and Density of States results indicate that global charges of dopamine and pramipexole are similar, while for risperidone, it is more than double. Pramipexole is an agonist, and the charge transfer process is similar to that of dopamine. Risperidone is an antagonist, and the charge transfer process is different from dopamine. The charge transfer is more significant with risperidone than with dopamine, and this could be related to the mechanism of action. This is in agreement with the working hypotheses that establish that it is possible to distinguish between agonists and antagonists since they have different capacity to transfer charge.

Encapsulation of Risperidone by Methylated ß-Cyclodextrins: Physicochemical and Molecular Modeling Studies.

Risperidone (RSP) is an atypical antipsychotic drug which acts as a potent antagonist of serotonin-2 (5TH2) and dopamine-2 (D2) receptors in the brain; it is used to treat schizophrenia, behavioral and psychological symptoms of dementia and irritability associated with autism. It is a poorly water soluble benzoxazole derivative with high lipophilicity. Supramolecular adducts between drug substance and two methylated ß-cyclodextrins, namely heptakis(2,6-di-O-methyl)-ß-cyclodextrin (DM-ß-CD) and heptakis(2,3,6-tri-O-methyl)-ß-cyclodextrin (TM-ß-CD) were obtained in order to enhance RSP solubility and improve its biopharmaceutical profile. The inclusion complexes were evaluated by means of thermoanalytical methods (TG-thermogravimetry/DTG-derivative thermogravimetry/HF-heat flow), powder X-ray diffractometry (PXRD), universal-attenuated total reflectance Fourier transform infrared (UATR-FTIR), UV spectroscopy and saturation solubility studies. Job's method was employed for the determination of the stoichiometry of the inclusion complexes, which was found to be 2:1 for both guest-host systems. Molecular modeling studies were carried out for an in-depth characterization of the interaction between drug substance and cyclodextrins (CDs). The physicochemical properties of the supramolecular systems differ from those of RSP, demonstrating the inclusion complex formation between drug and CDs. The RSP solubility was enhanced as a result of drug encapsulation in the CDs cavity, the higher increase being obtained with DM-ß-CD as host; the guest-host system RSP/DM-ß-CD can thus be a starting point for further research in developing new formulations containing RSP, with enhanced bioavailability.

Systematic development of a bioanalytical UPLC-MS/MS method for estimation of risperidone and its active metabolite in long-acting microsphere formulation in rat plasma.

A systematic approach to develop a UPLC-MS/MS method was applied for quantifying of risperidone (RISP), its active metabolite, 9-hydroxy risperidone (9-OH-RISP) and internal standard (propranolol) in rat plasma. Liquid-liquid extraction was performed using methyl tert-butyl ether for quantification of drug and its active metabolite by MS detection in the positive ion mode. Acquity UPLC system with BEH C18 (2.1 mm × 100 mm, particle size 1.7 µm) column was used along with acetonitrile (0.1% formic acid)-2 mM (milli mole) ammonium acetate in isocratic condition was used as the mobile phase. Detection was performed by multiple reactions monitoring with precursor-to-product ion transitions with m/z 411.2 â†’ 191.0 for RISP, m/z 427.2 â†’ 207.0 for 9-OH-RISP and m/z 260.1 â†’ 116.0 for IS. The method was validated as per the FDA guidance on bioanalytical method validation. Linearity (r2 = 0.999) was observed in the drug concentration ranging between 0.1 and 50 ng mL-1, while all other parameters were found to be within the acceptable ranges. Method robustness was optimized by Box-Behnken design to monitor the influential variables to achieve maximal recovery of the analytes in the rat plasma. Pharmacokinetic evaluation of the analytes from long-acting microparticles in rat plasma showed two peaks indicating an initial burst effect within 24 h of administration followed by controlled drug release pattern upto 45 days, while marketed formulation (Risperdal Consta®) showed no plasma concentration during the lag-time of 21 days followed by maximal drug absorption between 28 and 40 days.

Designed proteinoid polymers and nanoparticles encapsulating risperidone for enhanced antipsychotic activity.

BACKGROUND: Nanoparticles (NPs) incorporating drug formulations can be used to facilitate passage through biological barriers including the blood-brain barrier (BBB) and increase drug delivery and bioavailability. Hence, NP-based administration may enhance the efficiency of current antipsychotics. Encapsulation within NPs can resolve aqueous solubility problems that not only reduce permeability through the BBB but also affect targeting. The present study describes a new drug delivery system based on proteinoid NPs to explore the possibility of improving drug efficacy. Risperidone (RSP) is a commonly used atypical antipsychotic medication, and was therefore selected for encapsulation by proteinoid NPs. RESULTS: Proteinoid polymers with high molecular weight and low polydispersity were synthesized from L-amino acids and poly-L-lactic acid (PLLA) by thermal step-growth polymerization mechanism. RSP-loaded proteinoid NPs were then prepared using a self-assembly process in the presence of RSP, followed by PEGylation. The optimal PEGylated RSP-loaded NPs were characterized in terms of diameter and size distribution, drug loading, ζ-potential, cytotoxicity, biodistribution, and psychopharmacological effects. The findings indicate significantly higher antipsychotic activity of drug-loaded proteinoid NPs compared to free RSP. CONCLUSIONS: Proteinoid NPs enhance RSP delivery and may potentially increase drug efficiency by reducing dosage and side effects.

Proteinoid Nanocapsules as Drug Delivery System for Improving Antipsychotic Activity of Risperidone.

Risperidone (RSP) is an atypical antipsychotic drug widely used to treat schizophrenia and bipolar disorder. Nanoparticles (NPs) are being developed as in vivo targeted drug delivery systems, which cross the blood-brain barrier and improve pharmacokinetics and drug effectiveness. Here, biodegradable proteinoids were synthesized by thermal step-growth polymerization from the amino acids l-glutamic acid, l-phenylalanine and l-histidine and poly (l-lactic acid). Proteinoid NPs containing RSP were then formed by self-assembly, overcoming the insolubility of the drug in water, followed by PEGylation (poly ethylene glycol (PEG) conjugation to increase the stability of the NPs in the aqueous continuous phase. These NPs are biodegradable owing to their peptide and ester moieties. They were characterized in terms of diameter, size distribution, drug loading, and long-term storage. Behavioral studies on mice found enhanced antipsychotic activity compared to free RSP.

Evaluation of the Impacts of Formulation Parameters on the Pharmacokinetics and Bioequivalence of Risperidone Orodispersible Film: a Physiologically Based Pharmacokinetic Modeling Approach.

The purpose of this study was to investigate the impacts of the formulation parameters on the pharmacokinetics and bioequivalence of risperidone orodispersible film (ODF) using physiologically based pharmacokinetic model. The pharmacokinetic profiles of two risperidone ODFs, which exhibit different in vitro dissolution, were examined in Beagle dogs after supralingual administration. Subsequently, a physiologically based pharmacokinetic (PBPK) model was constructed to evaluate the in vivo performance of risperidone ODF. The parameter sensitivity analysis (PSA) was used to access the impacts of formulation parameters on the pharmacokinetics of risperidone. Moreover, the validated PBPK model was applied to predict human pharmacokinetic profiles and examine the bioequivalence of these two ODFs. These two ODFs displayed similar risperidone pharmacokinetic profiles in dogs. The parameter sensitivity analysis indicated that the changes in the solubility, particle size, particle density, and diffusion coefficient did not have obvious influence on the in vivo properties of risperidone ODF. Alternation of the in vitro complete dissolution time in water from 15 to 30 min led to a 30% decrease in Cmax and 20% of increase in Tmax. AUC0-∞ would be decreased if risperidone was not fully released within 1 h. As both ODFs completely released risperidone within 15 min, the difference in the extent of in vivo absorption, intestinal regional absorption location, and plasma concentration-time curves between these two ODFs was almost negligible. Consequently, a bioequivalence was foreseen in humans. The in vitro cumulative dissolution percentage in water at 15 min was found to be the major determinant on the in vivo properties of risperidone ODF. PBPK modeling appears to be an innovative strategy to guide the development of risperidone ODF.

Electromembrane extraction of chlorprothixene, haloperidol and risperidone from whole blood and urine.

Separation of antipsychotic drugs from whole blood and urine is of great importance for clinic and forensic laboratories. In this work, chlorprothixene, haloperidol and risperidone representing the first and second generations of antipsychotic drugs were studied. Among them, chlorprothixene and risperidone were investigated for the first time by electromembrane extraction (EME). After the screening, 2-nitrophenyl octyl ether (NPOE) was used as the supported liquid membrane (SLM). The EME performance for spiked water (pH 2), whole blood and urine was tested and optimized individually. Using NPOE and 60 V, efficient EME was achieved from urine and whole blood with trifluoroacetic acid as the acceptor solution. The equilibrium time required for EME was dependent on the sample matrices. The steady-state of EME was reached in 30 min and 20 min for whole blood and urine, respectively. At steady-state, the EME recoveries of the targets from different sample matrices were satisfactory, and were in the range of 74%-100%. The proposed EME approach combined with liquid chromatography-tandem mass spectrometry (LC-MS/MS) was evaluated using whole blood and urine. The obtained linearity was 1-200 ng mL-1, and the coefficient of determination (R2) was ≥ 0.9853 for haloperidol and ≥ 0.9936 for chlorprothixene and risperidone. The limit of detection (LOD) and accuracy for all the targets ranged from 0.2-0.6 ng mL-1 and 102%-110%, respectively, and the repeatability at low (1 ng mL-1), medium (10 ng mL-1) and high (200 ng mL-1) concentration was ≤ 12% (RSD). Finally, the validated approach was successfully used to determine chlorprothixene, risperidone and haloperidol in whole blood and urine from rats, which were treated with chlorprothixene, risperidone and haloperidol at low therapeutic dose, respectively.

The effect of PLGA molecular weight differences on risperidone release from microspheres.

The objective of the present study was to investigate the effect of molecular weight differences of poly (lactic-co-glycolic acid) (PLGA) on the in vitro release profile of risperidone microspheres. Four different PLGA molecular weights were investigated and all the microsphere formulations were prepared using the same manufacturing process. Physicochemical properties (particle size, drug loading, morphology and molecular weight) as well as in vitro degradation profiles of the prepared microspheres were investigated in addition to in vitro release testing. The in vitro release tests were performed using a previously developed flow through cell (USP apparatus 4) method. The particle size of the four prepared microsphere formulations varied, however there were no significant differences in the drug loading. Interestingly, the in vitro release profiles did not follow the molecular weight of the polymers used. Instead, the drug release appeared to be dependent on the glass transition temperature of the polymers as well as the porosity of the prepared formulations. The catalytic effect of risperidone (an amine drug) on PLGA during manufacturing and release testing, minimized the differences in the molecular weights of the four formulations, explaining the independence of the release profiles on PLGA molecular weight.

Distinct inactive conformations of the dopamine D2 and D3 receptors correspond to different extents of inverse agonism.

By analyzing and simulating inactive conformations of the highly homologous dopamine D2 and D3 receptors (D2R and D3R), we find that eticlopride binds D2R in a pose very similar to that in the D3R/eticlopride structure but incompatible with the D2R/risperidone structure. In addition, risperidone occupies a sub-pocket near the Na+ binding site, whereas eticlopride does not. Based on these findings and our experimental results, we propose that the divergent receptor conformations stabilized by Na+-sensitive eticlopride and Na+-insensitive risperidone correspond to different degrees of inverse agonism. Moreover, our simulations reveal that the extracellular loops are highly dynamic, with spontaneous transitions of extracellular loop 2 from the helical conformation in the D2R/risperidone structure to an extended conformation similar to that in the D3R/eticlopride structure. Our results reveal previously unappreciated diversity and dynamics in the inactive conformations of D2R. These findings are critical for rational drug discovery, as limiting a virtual screen to a single conformation will miss relevant ligands.

Almost a third of prescribed drugs work by acting on a group of proteins known as GPCRs (short for G-protein coupled receptors), which help to transmit messages across the cell's outer barrier. The neurotransmitter dopamine, for instance, can act in the brain and body by attaching to dopamine receptors, a sub-family of GPCRs. The binding process changes the three-dimensional structure (or conformation) of the receptor from an inactive to active state, triggering a series of molecular events in the cell. However, GPCRs do not have a single 'on' or 'off' state; they can adopt different active shapes depending on the activating molecule they bind to, and this influences the type of molecular cascade that will take place in the cell. Some evidence also shows that classes of GPCRs can have different inactive structures; whether this is also the case for the dopamine D₂ and D₃ receptors remained unclear. Mapping out inactive conformations of receptors is important for drug discovery, as compounds called antagonists can bind to inactive receptors and interfere with their activation. Lane et al. proposed that different types of antagonists could prefer specific types of inactive conformations of the dopamine D₂ and D₃ receptors. Based on the structures of these two receptors, the conformations of D₂ bound with the drugs risperidone and eticlopride (two dopamine antagonists) were simulated and compared. The results show that the inactive conformations of D₂ were very different when it was bound to eticlopride as opposed to risperidone. In addition D₂ and D₃ showed a very similar conformation when attached to eticlopride. The two drugs also bound to the inactive receptors in overlapping but different locations. These computational findings, together with experimental validations, suggest that D₂ and D₃ exist in several inactive states that only allow the binding of specific drugs; these states could also reflect different degrees of inactivation. Overall, the work by Lane et al. contributes to a more refined understanding of the complex conformations of GPCRs, which could be helpful to screen and develop better drugs.

Organogels based on amino acid derivatives and their optimization for drug release using response surface methodology.

Organogels are excellent drug carrier for controlled release. Organogels based on amino acid derivatives has been widely used in the area of drug delivery. In this study, a series of the organogel system based on amino acid derivatives gelators was designed and prepared to investigate the structure-property correlation in organogels. To investigate the factors that influence the property of drug release, we varied the formulation in the organogels: gelator structure, gelator concentration, volume of antigelation solvent, and drug loading. Through the Box-Behnken tests, the optimum organogel formulation in vitro was obtained. The self-healing properties of the organogel have been utilised for injection of a model lipophilic risperidone in situ, and sustained release of the drug has been studied over about one week in vivo. In conclusion, the gelation ability of gelators could be adjusted by the gelator structure. Gel property is related with the whole composition of the formulation. As drug carrier, the drug release property of organogels is affected by multiple factors. Our investigation of the gel release property will play a theoretical guiding role in the application in the in situ drug delivery system.

In vitro-in vivo correlation of parenteral PLGA microspheres: Effect of variable burst release.

Development of IVIVCs is a very complicated process, especially for complex drug products such as parenteral PLGA microspheres with multiphasic drug release characteristics. Specifically, microspheres that exhibit an initial burst release phase are even more challenging since the in vitro and in vivo burst release phases may not be comparable if drug absorption is rate-limiting at this stage. Therefore, the objectives of the present work were: 1) to investigate the predictability of developed IVIVCs for the in vivo burst release phase based on the in vitro burst release phase of the formulations; and 2) to evaluate the impact of variable burst release on the predictability of the developed IVIVCs for two different types of microsphere-based drug products. Accordingly, Risperdal Consta® (Risperidone) and Lupron Depot® (Leuprolide acetate, LA) were selected as model products. Compositionally equivalent risperidone and LA formulations with variable burst release phases were prepared with manufacturing process changes (such as solvent systems and mixing methods). The prepared microspheres exhibited differences in critical physicochemical properties (such as particle size, porosity, average pore diameter, and drug distribution) and hence differences in their in vitro release characteristics (such as variable burst release and release rate). The in vitro and in vivo (rabbit model (intramuscular injection) burst release were similar for the risperidone microspheres but were significantly different for the LA microspheres. This had an impact on the complexity of the developed IVIVC models. Level A IVIVCs with the ability to predict various types of burst release were developed using time scaling and shifting factors. Moreover, it was observed that IVIVCs developed using formulations with less variation in burst release had better predictability and vice-versa. Thus, the present research has provided a comprehensive understanding of the impact of the burst release phase on the development, complexity, and predictability of IVIVCs for complex parenteral microspheres containing a variety of therapeutic molecules.

Probing Binding Landscapes and Molecular Recognition Mechanisms of Atypical Antipsychotic Drugs towards the Selective Targeting of D2 Dopamine Receptor.

Dopamine receptors constitute a unique class of G-protein coupled receptors that mediate the activities of dopamine, a neurotransmitter implicated in diverse neurological diseases when dysregulated. Over the years, antipsychotic drugs have been primarily directed towards D2 dopamine receptor (DRD2) while associable adverse effects have been centred on non-selective targeting. The recent crystal structure of DRD2 in complex with atypical antipsychotic could further aid the structure-based design of highly DRD2-selective antipsychotics. Therefore, in this study, we comprehensively investigate the molecular recognition and differential binding landscapes of class-I and II DRD2 atypical antipsychotics, using membrane-bilayer molecular dynamics simulation and binding free energy techniques. Findings revealed that selected class-I antipsychotics exhibited binding dynamics and poses dissimilar to the class-II types with different interactive mechanisms at the binding cavity of DRD2. More interestingly, the class-II drugs established a highly coordinated binding at the DRD2 active site with a pertinent and recurrent involvement of Asp114 via strong hydrogen interactions. Furthermore, while these compounds exert distinct effects on DRD2 structure, findings revealed that the class-II types favourably engaged the deep hydrophobic pocket of DRD2 compared to the class-I drugs. We speculate that these findings will be fundamental to the discovery of highly selective DRD2 antipsychotics.

Effect of minor manufacturing changes on stability of compositionally equivalent PLGA microspheres.

The physicochemical properties and drug release characteristics of Q1/Q2 equivalent microspheres are sensitive to minor manufacturing changes, which may alter their stability under different storage-conditions. This may be undesirable due to the presence of a substantial amount of drug in microsphere products. Hence, the objective of the present work was to investigate the impact of minor manufacturing changes on the stability of Q1/Q2 equivalent microspheres under various storage conditions. Two Q1/Q2 equivalent risperidone microsphere formulations prepared with minor manufacturing changes (solvent system etc.) showed differences in their physicochemical properties (size, morphology, porosity etc.), drug release characteristics and hence, storage stability. Overall, both formulations were stable under long-term storage conditions (4 °C/ambient humidity). However, under the intermediate storage conditions (25 °C/ambient humidity), only formulation 1 was stable while formulation 2 showed significant polymer degradation, particle aggregation and alteration in the drug release characteristics. Lastly, under accelerated storage conditions (40 °C/ambient humidity vs 75% RH), the extent of polymer degradation, morphological changes and alteration of drug release characteristics of formulation 2 was significantly higher compared to that of formulation 1. Thus, minor manufacturing changes have the potential to significantly alter the storage stability and, hence, the quality and performance of complex drug products such as microspheres.

Formulation and biopharmaceutical evaluation of risperidone-loaded chitosan nanoparticles for intranasal delivery.

Objective: High lipophilicity and extensive hepatic metabolism limits the oral application of risperidone in the treatment of CNS disorders. In order address this limitation, risperidone (RS) loaded chitosan nanoparticles (CS-NPs) were processed for intranasal administration in the management of schizophrenia. Methods: RS loaded CS-NPs were prepared by ionic gelation of chitosan with tripolyphosphate and stabilized by tween 80/ poloxamer 188. The CS-NPs were characterized by FTIR, DSC, particle size, zeta potential and surface morphology. Entrapment efficiency, mucoadhesive strength, in vitro drug release, and release kinetics of CS-NPs were evaluated. Pharmacokinetics and pharmacodynamics of RS loaded CS-NPs were studied using Wistar rats. Stereotypy behavior and swimming normalization tests were conducted in amphetamine induced psychosis in animals. Results: Risperidone nanoparticles (RP12) were produced with an average size of 86 nm, polydispersity index of 0.287, zeta potential of +36.6 mV, mucoadhesion of 68.9% and entrapment efficiency of 77.96%. CS-NPs released the RS in controlled manner with Fickian diffusion mode. Maximum concentration of RS in plasma was 1240 ng/ml at 4 h for RP12, and 403.8 ng/ml at 2 h for RS sample. RS loaded CS-NPs significantly reduced the stereotypy score in experimental animals that indicated the efficiency of CS-NPs in delivery of RS at brain tissues and moreover amphetamine effect was reversed. Thus, RS loaded CS-NPs proved as potential delivery systems against induced psychotic disorders. Conclusion: Risperidone loaded chitosan nanoparticles were effective against schizophrenia via intranasal route.

Liquid jet breakup: A new method for the preparation of poly lactic-co-glycolic acid microspheres.

The purpose of this study was to apply the phenomenon of liquid jet breakup to the preparation of sustained-release microspheres. The mechanisms of liquid jet breakup in different jet states were investigated and the single factor method was used to study the effect of each process parameter on the particle size and size distribution of microspheres. Meantime, the prepared microspheres were characterized by morphology, drug loading, encapsulation efficiency and in vitro release. The results indicated that the process of liquid jet breakup could have 5 different states. The laminar flow state dominated when the Reynolds number (Re) was low, and the prepared microspheres had larger particle sizes. When the Re was high, the turbulent state was dominant and the microspheres had smaller particle sizes. And during the transition state from the laminar flow to the turbulence, the microspheres had a wide particle size distribution. Different process parameters could affect the particle size and distribution of microspheres by changing the Re, surface tension coefficient and viscosity. The microspheres prepared by liquid jet breakup were smooth and round with the drug loading of 35% and the encapsulation efficiency of 88%. In addition, when the polymeric carrier materials were different, the microspheres could have various drug release models such as sustained release with a lag phase, sustained release with no lag phase, pulsed release and so on, which could be applied widespread in the future.

Structures of the 5-HT2A receptor in complex with the antipsychotics risperidone and zotepine.

Many drugs target the serotonin 2A receptor (5-HT2AR), including second-generation antipsychotics that also target the dopamine D2 receptor (D2R). These drugs often produce severe side effects due to non-selective binding to other aminergic receptors. Here, we report the structures of human 5-HT2AR in complex with the second-generation antipsychotics risperidone and zotepine. These antipsychotics effectively stabilize the inactive conformation by forming direct contacts with the residues at the bottom of the ligand-binding pocket, the movements of which are important for receptor activation. 5-HT2AR is structurally similar to 5-HT2CR but possesses a unique side-extended cavity near the orthosteric binding site. A docking study and mutagenic studies suggest that a highly 5-HT2AR-selective antagonist binds the side-extended cavity. The conformation of the ligand-binding pocket in 5-HT2AR significantly differs around extracellular loops 1 and 2 from that in D2R. These findings are beneficial for the rational design of safer antipsychotics and 5-HT2AR-selective drugs.