Evaluation of nutritional, technological, oxidative, and sensory properties of low-sodium and phosphate-free mortadellas produced with bamboo fiber, pea protein, and mushroom powder.

This study examined the effects of replacing alkaline phosphate (AP) with bamboo fiber (BF), isolated pea protein (PP), and mushroom powder (MP) on the nutritional, technological, oxidative, and sensory characteristics of low-sodium mortadellas. Results indicated that this reformulation maintained the nutritional quality of the products. Natural substitutes were more effective than AP in reducing water and fat exudation. This led to decreased texture profile analysis (TPA) values such as hardness, cohesiveness, gumminess, and chewiness. The reformulation reduced the L* values and increased the b* values, leading to color modifications rated from noticeable to appreciable according to the National Bureau of Standards (NBS) index. Despite minor changes in oxidative stability indicated by increased values in TBARS (from 0.19 to 0.33 mg MDA/kg), carbonyls (from 2.1 to 4.4 nmol carbonyl/mg protein), and the volatile compound profile, the sensory profile revealed a beneficial increase in salty taste, especially due to the inclusion of MP, which was enhanced by the synergy with BF and PP. In summary, the results confirmed the potential of natural alternatives to replace chemical additives in meat products. Incorporating natural antioxidants into future formulations could address the minor oxidation issues observed and enhance the applicability of this reformulation strategy.

Enhanced flexibility of high-yield bamboo pulp fibers via cellulase immobilization within guar gum/polyacrylamide/polydopamine interpenetrating network hydrogels.

Softness is a crucial criterion in assessing the comfort and usability of tissue paper. Flexible fibers contribute to the softness of the tissue paper by allowing the sheets to conform to the contours of the skin without feeling rough or abrasive. This study focuses on developing innovative CGG/APAM/PDA hydrogels with interpenetrating networks consisting of cationic guar gum, anionic polyacrylamide, and polydopamine for cellulase immobilization, aimed at improving bamboo fiber flexibility. Cellulase biomolecules are efficiently immobilized on CGG/APAM/PDA hydrogels through the Schiff base reaction. Immobilized cellulases have a wider pH applicability than free cellulases, good storage stability, and can maintain high relative activity at relatively high temperatures. The treatment of bamboo fibers with immobilized cellulase results in a significant increase in flexibility, reaching 6.90 × 1014 N·m2, which is 7.18 times higher than that of untreated fibers. The immobilization of cellulases using CGG/APAM/PDA hydrogels as carriers results in a substantial enhancement of storage stability, pH applicability, and inter-fiber bonding strength, as well as the capacity to sustain high relative enzymatic activity at elevated temperatures. The immobilization of cellulase within CGG/APAM/PDA interpenetrating network hydrogels presents a viable strategy for enhancing bamboo fiber flexibility, thereby expanding the accessibility of tissue products.

Revealing spatial distribution and accessibility of cell wall polymers in bamboo through chemical imaging and mild chemical treatments.

Understanding the distribution and accessibility of polymers within plant cell walls is crucial for addressing biomass recalcitrance in lignocellulosic materials. In this work, Imaging Fourier Transform Infrared (FTIR) and Raman spectroscopy, coupled with targeted chemical treatments, were employed to investigate cell wall polymer distribution in two bamboo species at both tissue and cell wall levels. Tissue-level Imaging FTIR revealed significant disparities in the distribution and chemical activity of cell wall polymers between the fibrous sheath and fibrous strand. At the cell wall level, Imaging Raman spectroscopy delineated a distinct difference between the secondary wall and intercellular layer, with the latter containing higher levels of lignin, hydroxycinnamic acid (HCA), and xylan, and lower cellulose. Mild acidified sodium chlorite treatment led to partial removal of lignin, HCA, and xylan from the intercellular layer, albeit to a lesser extent than alkaline treatment, indicating susceptibility of these polymers to chemical treatment. In contrast, lignin in the secondary wall exhibited limited reactivity to acidified sodium chlorite but was slightly removed by alkaline treatment, suggesting stable chemical properties with slight alkaline intolerance. These findings provide valuable insights into the inherent design mechanism of plant cells and their efficient utilization.

Structural elucidation of lignin, hemicelluloses and LCC from both bamboo fibers and parenchyma cells.

Biomass recalcitrance, a key challenge in biomass utilization, is closely linked to the architectural composition and cross-linkages of molecules within cell walls. With three bamboo species investigated, this study aims to elucidate the inherent molecular-scale structural differences between bamboo fibers and parenchyma cells through a systematic chemical extraction and structural characterization of isolated hemicelluloses, lignin, and lignin-carbohydrate complexes (LCC). We observed that parenchyma cells exhibit superior alkaline extractability compared to fibers. Additionally, we identified the hemicelluloses in parenchyma cells as L-arabino-4-O-methyl-D-glucurono-D-xylan, displaying a highly branched structure, while that in fibers is L-arabino-D-xylan. Furthermore, the parenchyma cell lignin exhibited a higher syringyl-to-guaiacyl (S/G) ratio and ß-O-4 linkage content compared to fibers, whereas fibers contain more carbon­carbon linkages including ß-ß, ß-5, and ß-1. This notable structural difference suggests a denser and more stable lignin in bamboo fibers. Importantly, we found that LCC in parenchyma cells predominantly comprises γ-ester linkages, which exhibit an alkaline-unstable nature. In contrast, fibers predominantly contain phenyl glycoside linkages, characterized by their alkaline-stable nature. These findings were observed for all the tested bamboo species, indicating the conclusions should be also valid for other bamboo species, suggesting the competitiveness of bamboo parenchyma cells as a valuable biofuel feedstock.

Improving structural damage tolerance and fracture energy via bamboo-inspired void patterns.

Bamboo has a functionally-graded microstructure that endows it with a combination of desirable properties, such as high failure strain, high toughness, and a low density. As a result, bamboo has been widely used in load-bearing structures. In this work, we study the use of bamboo-inspired void patterns to geometrically improve the failure properties of structures made from brittle polymers. We perform finite element analysis and experiments on 3D-printed structures to quantify the effect of the shape and spatial distribution of voids on the fracture behavior. The introduction of periodic, uniformly distributed voids in notched bend specimens leads to a 15-fold increase in the fracture energy relative to solid specimens. Adding a gradient to the pattern of voids leads to a cumulative 55-fold improvement in the fracture energy. Mechanistically, the individual voids result in crack blunting, which suppresses crack initiation, while neighboring voids redistribute stresses throughout the sample to enable large deformation before failure.

Fully upgrade bamboo biomass into three multifunctional products through biphasic γ-valerolactone and aqueous phosphoric acid pretreatment.

In this manuscript, three components of lignocellulosic biomass were obtained by deconstructing bamboo with γ-valerolactone-H2O biphasic system, and the delignification rate of 80.92 % was achieved at 120 °C for 90 min. Lignin nanospheres with diameters ranging from 75 nm to 2 um could be customized by varying the self-assembly rate. Furthermore, the lignin nanospheres-poly(vinyl alcohol) film was prepared by cross-linking lignin nanospheres and poly(vinyl alcohol), which can obtain 90 % ultraviolet absorption capacity, while the light transmittance in non-ultraviolet band was almost unchanged. At the same time, due to the strong hydrogen formation between lignin nanospheres and poly(vinyl alcohol) bond network, the tensile properties of the composite film were also improved by 30 %. Besides, the high specific surface area of biomass-derived porous biochar (2056 m2/g) can be obtained after carbonization of solid residues at 850 °C for 2 h, which was almost 8 times the specific surface area of the direct biomass carbonization due to the removal of lignin and hemicellulose. biomass-derived porous biochar can be used as an adsorbent, with a CO2 capture capacity of 4.5 mmol g-1 at normal temperature (25 °C, 1 bar). The filtrate after the reaction contained a large amount of hemicellulose oligomers, which can be reacted with dichloromethane at 170 °C for 1 h to obtain the furfural yield of 74 %. In summary, the proposed biorefinery scheme achieves a full-component upgrade of lignocellulose and can be further applied in various downstream fields.

An efficient preparation process of sisal fibers via the specialized retting microorganisms: Based on the ideal combination of degumming-related enzymes for the effective removal of non-cellulosic macromolecules.

Bioaugmentation retting with the specialized pectinolytic and xylanolytic microorganisms can accelerate the removal of non-cellulosic macromolecules around plant fibers, thus shortening retting time and facilitating fiber quality. Currently, few specialized microorganisms have been explored for the retting of sisal fibers. The present study excavated the retting fungi including Aspergillus micronesiensis HD 3-6, Penicillium citrinum HD 3-12-3, and Cladosporium sp. HD 4-13 from the region-specific soil samples of planting sisal, and investigated their bioaugmentation retting effects on raw sisal leaves. Results showed that combination of the three fungi achieved the most excellent degumming efficiency (13.69 % of residual gum in sisal fibers) and the highest fiber yield (4.47 %). Furthermore, this fungi combination had the ideal enzymatic hydrolysis features with high activities of pectinase, xylanase and mannanase whereas a low activity of cellulase during the whole retting process, thus endowing the prepared sisal fibers with the lowest mass percentage of non-cellulosic macromolecules (9.76 wt%) and the highest cellulose content (89.23 wt%). SEM and FT-IR analysis further verified that the non-cellulosic substances around sisal fibers were efficiently removed. In summary, the consortia of the three fungi achieved ideal degumming-related enzymes for the removal of non-cellulosic macromolecules, thus acquiring the efficient preparation of sisal fibers.

Processing natural bamboo into white bamboo through photocatalyzed lignin oxidation.

Scalable and highly efficient bamboo whitening remains a great challenge. Herein, an effective bamboo whitening strategy is proposed based on photocatalyzed oxidation, which involves H2O2 infiltration and UV illumination. The as-prepared white bamboo well maintains the nature structure of natural bamboo and demonstrates high whiteness and superior mechanical properties. The absorbance value is significantly decreased to 3.5 and the transmittance is increased to 0.04 % in UV-visible wavelength range due to the removal of light-absorbing chromospheres of lignin, resulting in a high whiteness when the UV illumination time is 8 h. In addition, the white bamboo displays a high tensile strength of 30 MPa and a high flexural strength of 36 MPa due to the well-preserved lignin units (lignin preservation is about 89 %). XRD patterns and analysis show that photocatalyzed oxidation has no effect on the crystal parameters of cellulose. Compared with the traditional bamboo whitening technology, our photocatalyzed oxidation strategy demonstrates significant advantage including chemical and time conservation, high efficiency, environment friendliness, and mechanical robustness. This highly efficient and environmentally friendly photocatalyzed oxidation strategy for the fabrication of white bamboo may pave the way of bamboo-based energy-efficient structural materials for engineering application.

How lignocellulose degradation can promote the quality and function of dietary fiber from bamboo shoot residue by Inonotus obliquus fermentation.

Lignocellulose constitutes the primary component of dietary fiber. We assessed how fermenting bamboo shoot residue with the medicinal white-rot fungus Inonotus obliquus affected the yield, composition, and functional attributes of dietary fiber by altering bamboo shoot residue lignocellulose's spatial structure and composition. I. obliquus secretes lignocellulolytic enzymes, which effectively enhance the degradation of holocellulose and lignin by 87.8% and 25.5%, respectively. Fermentation led to a more porous structure and reduced crystallinity. The yield of soluble dietary fiber increased from 5.1 g/100 g raw BSR to 7.1 g/100 g 9-day-fermented bamboo shoot residue. The total soluble sugar content of dietary fiber significantly increased from 9.2% to 13.8%, which improved the hydration, oil holding capacity, in vitro cholesterol, sodium cholate, and nitrite adsorption properties of dietary fiber from bamboo shoot residue. These findings confirm that I. obliquus biotransformation is promising for enhancing dietary fiber yield and quality.

Organic/metallic component analysis of lignocellulosic biomass: A thermochemical-perspective-based study on rice and bamboo waste.

Thermochemical treatment is significantly impacted by the physiochemical properties of lignocellulosic biomass. Traditional characterization methods lack granularity, requiring advanced analytical techniques for comprehensive biomass characterization. This study analyzed elemental composition and their distribution in untreated rice husk, rice straw, and bamboo chips at micron and sub-micron scales. Results reveal significant variations in composition and spatial distribution of metallic components among agro-residues. Thermogravimetric analysis shows divergent decomposition patterns, while spectroscopic analysis indicates structural complexities and distinct silica content. Surface mapping illustrates prevalent silica and alkali metals on rice husk and rice straw. Atomic force microscopy depicts distinctive surface morphologies, with rice straw exhibiting heightened roughness due to silica bodies. Inductively coupled plasma-mass-spectrometry identified the abundance of alkali and alkaline earth metals in rice waste. Time-of-flight secondary ion mass spectrometry elucidates elemental spatial localization, affirming heterogeneous distribution across rice waste and homogenous distribution across bamboo waste. This study bridges the gap between biomass composition and optimized thermochemical conversion outcomes.

Adsorption of Cu (II) and Zn (II) in aqueous solution by modified bamboo charcoal.

Due to the development of industries such as mining, smelting, industrial electroplating, tanning, and mechanical manufacturing, heavy metals were discharged into water bodies seriously affecting water quality. Bamboo charcoal, as an environmentally friendly new adsorbent material, in this paper, the virgin bamboo charcoal (denoted as WBC) was modified with different concentrations of KMnO4 and NaOH to obtain KMnO4-modified bamboo charcoal (KBC) and NaOH-modified bamboo charcoal (NBC) which was used to disposed of water bodies containing Cu2+ and Zn2+. The main conclusions were as following: The adsorption of Cu2+ by WBC, KBC and NBC was significantly affected by pH value, and the optimum pH was 5.0. Differently, the acidity and alkalinity of the solution doesn't effect the adsorption of Zn2+ seriousely. Meanwhile, surface diffusion and pore diffusion jointly determine the adsorption rate of Cu2+ and Zn2+. The test result of EDS showed that Mn-O groups formed on the surface of K6 (WBC treated by 0.06 mol/L KMnO4) can promote the adsorption of Cu2+ and Zn2+ at a great degree. The O content on N6(WBC treated by 6 mol/L NaOH) surface increased by 30.95% compared with WBC. It is speculated that the increase of carbonyl group on the surface of NBC is one of the reasons for the improvement of Cu2+ and Zn2+ adsorption capacity. Finally, the residual concentrations of Cu2+ and Zn2+ in wastewater are much lower than 0.5 mg/L and 1.0 mg/L, respectively. Thus it can be seen, KBC and NBC could be a promising adsorbent for heavy metals.

Glued-bamboo composite based on a highly cross-linked cellulose-based adhesive and an epoxy functionalized bamboo surface.

Bamboo, as a renewable bioresource, exhibits advantages of fast growth cycle and high strength. Bamboo-based composite materials are a promising alternative to load-bearing structural materials. It is urgent to develop high-performance glued-bamboo composite materials. This study focused on the chemical bonding interface to achieve high bonding strength and water resistance between bamboo and dialdehyde cellulose-polyamine (DAC-PA4N) adhesive by activating the bamboo surface. The bamboo surface was initially modified in a directional manner to create an epoxy-bamboo interface using GPTES. The epoxy groups on the interface were then chemically crosslinked with the amino groups of the DAC-PA4N adhesive, forming covalent bonds within the adhesive layer. The results demonstrated that the hot water strength of the modified bamboo was improved by 75.8 % (from 5.17 to 9.09 MPa), and the boiling water strength was enhanced by 232 % (from 2.10 to 6.99 MPa). The bonding and flexural properties of this work are comparable to those of commercial phenolic resin. The activation modification of the bamboo surface offers a novel approach to the development of low-carbon, environmentally friendly, and sustainable bamboo engineering composites.

Effects of bamboo leaf flavonoids on growth performance, antioxidants, immune function, intestinal morphology, and cecal microbiota in broilers.

BACKGROUND: Bamboo leaf flavonoids (BLF) are the main bioactive ingredients in bamboo leaves. They have antioxidant, anti-inflammatory, antibacterial, and other effects. In this study, the effects of dietary BLF on growth performance, immune response, antioxidant capacity, and intestinal microbiota of broilers were investigated. A total of 288 broilers were divided into three groups with eight replicates and 12 birds in each replicate. Broilers were fed a basic diet or the basic diet supplemented with 1000 or 2000 mg kg-1 BLF for 56 days. RESULTS: The results showed that supplementation of BLF increased body weight (BW) and average daily weight gain (ADG), and reduced average daily feed intake (ADFI) (P < 0.05). The serum immunoglobulin A (IgA), immunoglobulin M (IgM), and interleukin 10 (IL-10) content of broilers in the BLF1000 group was increased and the interleukin 1ß (IL-1ß) and tumor necrosis factor-α (TNF-α) content was decreased (P < 0.05). The levels of IgM and IL-10 in jejunum mucosa were found to be enhanced by BLF (P < 0.05). The BLF1000 group exhibited a significant reduction in the concentration of TNF-α (P < 0.05). Serum and jejunum mucosa total antioxidant capacity (T-AOC) levels in the BLF1000 group were increased (P < 0.05). The serum catalase (CAT) and glutathione peroxidase (GSH-Px) effects of the BLF1000 group and serum CAT effects of BLF2000 group were increased (P < 0.05). The CON group demonstrated a lower relative abundance of Christensenellaceae_R-7_group and Oscillibacter than the BLF group (P < 0.05). CONCLUSION: Dietary BLF inclusion enhanced the growth performance, immune, and antioxidant functions, improved the intestinal morphology, and ameliorated the intestinal microflora structure in broiler. Adding 1000 mg kg-1 BLF to the broiler diet can be considered as an effective growth promoter. © 2024 Society of Chemical Industry.

Efficient extraction of lignin from moso bamboo by microwave-assisted ternary deep eutectic solvent pretreatment for enhanced enzymatic hydrolysis.

Applications of deep eutectic solvent (DES) systems to separate lignocellulosic components are of interest to develop environmentally friendly processes and achieve efficient utilization of biomass. To enhance the performance of a binary neutral DES (glycerol:guanidine hydrochloride), various Lewis acids (e.g., AlCl3·6H2O, FeCl3·6H2O, etc.) were introduced to synthesize a series of ternary DES systems; these were coupled with microwave heating and applied to moso bamboo. Among the ternary DES systems evaluated, the FeCl3-based DES effectively removed lignin (81.17%) and xylan (85.42%), significantly improving enzymatic digestibility of the residual glucan and xylan (90.15% and 99.51%, respectively). Furthermore, 50.74% of the lignin, with high purity and a well-preserved structure, was recovered. A recyclability experiment showed that the pretreatment performance of the FeCl3-based DES was still basically maintained after five cycles. Overall, the microwave-assisted ternary DES pretreatment approach proposed in this study appears to be a promising option for sustainable biorefinery operations.

Unveiling the Dissolution Regularities of the Lignin-Carbohydrate Complex in Bamboo Cell Walls during Alkali Pretreatment.

Bamboo is a promising biomass resource. However, the complex multilayered structure and chemical composition of bamboo cell walls create a unique anti-depolymerization barrier, which increases the difficulty of separation and utilization of bamboo. In this study, the relationship between the connections of lignin-carbohydrate complexes (LCCs) within bamboo cell walls and their multilayered structural compositions was investigated. The chemical composition, structural properties, dissolution processes, and migration mechanisms of LCCs were analyzed. Alkali-stabilized LCC bonds were found to be predominantly characterized by phenyl glycoside (PhGlc) bonds along with numerous p-coumaric acid (PCA) linkage structures. As demonstrated by the NMR and CLSM results, the dissolution of the LCC during the alkaline pretreatment process was observed to migrate from the inner secondary wall (S-layer) of the bamboo fiber cell walls to the cell corner middle lamella (CCML) and compound middle lamella (CML), ultimately leading to its release from the bamboo. Furthermore, the presence of H-type lignin-FA-arabinoxylan linkage structures within the bamboo LCC was identified with their primary dissolution observed in the S-layer of the bamboo fiber cell walls. The study results provided a clear target for breaking down the anti-depolymerization barrier in bamboo, signifying a major advancement in achieving the comprehensive separation of bamboo components.

Sustainable high-strength and dimensionally stable composites through in situ regulation and reconstitution of bamboo-derived lignin and hemicellulose contents.

The development of modern construction and transportation industries demands increasingly high requirements for thin, lightweight, high-strength, and highly tough composite materials, such as metal carbides and concrete. Bamboo is a green, low-carbon, fast-growing, renewable, and biodegradable material with high strength and toughness. However, the density of its inner layer is low due to the functional gradient (the volume fraction of vascular bundles decreases from the outer layer to the inner layer), resulting in low performance, high compressibility, and significant amounts of bamboo waste. We utilized chemical and mechanical treatments of bamboo's low-density, low-strength inner layers to create lightweight, ultra-thin, high-strength, and high-toughness composites. The treatment included the partial removal of lignin and hemicellulose to alter the chemical components, followed by mechanical drying and hot pressing. The treated bamboo had 100.8 % higher tensile strength (150.35 MPa), 47.7 % higher flexural strength (97.67 MPa), and 132.0 % higher water resistance and was approximately 68.9 % thinner than the natural bamboo. The excellent physical and mechanical properties of the treated bamboo are attributed to the contraction of parenchyma cells during delignification, the interlocking due to the collapse of parenchyma cells during mechanical drying, and an increase in the density of hydrogen bonds between cellulose molecular chains during hot pressing. Our research provides a new strategy for obtaining sustainable, ultra-thin, lightweight, high-strength, and high-toughness composite materials from bamboo for construction and transportation applications.

A strong hydrogen bond bridging interface based on tannic acid for improving the performance of high-filled bamboo fibers/poly (butylene succinate-co-butylene adipate) (PBSA)biocomposites.

Natural plant fiber-reinforced bio-based polymer composites are widely attracting attention because of their economical, readily available, low carbon, and biodegradable, and showing promise in gradually replacing petroleum-based composites. Nevertheless, the fragile interfacial bonding between fiber and substrate hinders the progression of low-cost and abundant sustainable high-performance biocomposites. In this paper, a novel high-performance sustainable biocomposite was built by introducing a high density strong hydrogen-bonded bridging interface based on tannic acid (TA) between bamboo fibers (BFs) and PBSA. Through comprehensive analysis, this strategy endowed the biocomposites with better mechanical properties, thermal stability, dynamic thermo-mechanical properties and water resistance. The optimum performance of the composites was achieved when the TA concentration was 2 g/L. Tensile strength as well as modulus, flexural strength as well as modulus, and impact strength improved by 22 %, 10 %, 15 %, 35 %, and 25 % respectively. Additionally, the initial degradation temperature(Tonset) and maximum degradation temperature(Tmax) increased by 12.07 °C and 14.8 °C respectively. The maximum storage modulus(E'), room temperature E', and loss modulus(E")elevated by 199 %, 75 %, and 181 % respectively. Moreover, the water absorption rate decreased by 59 %. The strong hydrogen-bonded bridging interface serves as a novel model and theory for biocomposite interface engineering. At the same time, it offers a promising future for the development of high performance sustainable biocomposites with low cost and abundant biomass resources and contributes to their wide application in aerospace, automotive, biomedical and other field.

Fermented bamboo powder activates gut odorant receptors, and promotes intestinal health and growth performance of dwarf yellow-feathered broiler chickens.

The present study investigated the effects of fermented bamboo powder (FPB) on gut odorant receptors (OR), intestinal health, and growth performance of dwarf yellow-feathered broiler chickens. Six hundred (600) healthy 1-day-old chicks were randomly assigned into 2 groups, with 10 replicates consisting of 30 chicks each. The control group was fed a basal diet. In contrast, the experimental group was fed the basal diet supplemented with 1.0, 2.0, 4.0, and 6.0 g/kg FBP for 4 different phases, namely phase I (1-22 d), phase II (23-45 d), phase III (46-60 d), and phase IV (61-77 d), respectively. The first 2 phases were considered pretreatment (0-45 d), and the remaining were experimental (46-77 d) periods. The tissue samples were collected from phase IV. The chickens in the FBP supplementation group exhibited a significant increment in body weight gain, evisceration yield, breast, thigh, and liver weight, while also experiencing a decrease in the FCR (P < 0.05). Furthermore, the villus height, crypt depth, and villus area exhibited significant increases in the FBP group (P < 0.01). Additionally, the secretion levels of gut hormones such as glucagon-like peptide-1, peptide YY, cholecystokinin, and 5-hydroxytryptamine were significantly elevated in the serum, duodenum, jejunum, and ileum tissues in the FBP group (P < 0.05). The results of qRT-PCR indicated that ORs had responsive expression in the gizzard, proventriculus, and small intestine of chickens when fed with the FBP diet (P < 0.05). Notably, the expression of the COR1, COR2, COR4, COR6, COR8, COR9, OR52R1, OR51M1, OR1F2P, OR5AP2, and OR14J1L112 genes was stronger in the small intestines compared to the gizzard and proventriculus. In conclusion, these results suggest that the FPB plays a crucial role in growth performance, activation of ORs, and gut health and development.

An improved plastination method for strengthening bamboo culms, without compromising biodegradability.

Biomaterials are increasingly being designed and adapted to a wide range of structural applications, owing to their superior mechanical property-to-weight ratios, low cost, biodegradability, and CO2 capture. Bamboo, specifically, has an interesting anatomy with long tube-like vessels present in its microstructure, which can be exploited to improve its mechanical properties for structural applications. By filling these vessels with a resin, e.g. an applied external loading would be better distributed in the structure. One recent method of impregnating the bamboo is plastination, which was originally developed for preserving human remains. However, the original plastination process was found to be slow for bamboo impregnation application, while being also rather complicated/methodical for industrial adaptation. Accordingly, in this study, an improved plastination method was developed that is 40% faster and simpler than the original method. It also resulted in a 400% increase in open-vessel impregnation, as revealed by Micro-X-ray Computed Tomography imaging. The improved method involves three steps: acetone dehydration at room temperature, forced polymer impregnation with a single pressure drop to - 23 inHg, and polymer curing at 130 °C for 20 min. Bamboo plastinated using the new method was 60% stronger flexurally, while maintaining the same modulus of elasticity, as compared to the virgin bamboo. Most critically, it also maintained its biodegradability from cellulolytic enzymes after plastination, as measured by a respirometric technique. Fourier transform infrared-attenuated total reflection, and thermogravimetric analyses were conducted and showed that the plastinated bamboo's functional groups were not altered significantly during the process, possibly explaining the biodegradability. Finally, using cone calorimetry, plastinated bamboo showed a faster ignition time, due to the addition of silicone, but a lower carbon monoxide yield. These results are deemed as a promising step forward for further improvement and application of this highly abundant natural fiber in engineering structures.

Comparison of the improving embryo development effects of Sasa quelpaertensis Nakai extract, p-coumaric acid, and myricetin on porcine oocytes according to their antioxidant capacities.

This study investigated the antioxidant activities of Sasa quelpaertensis Nakai extract (SQE), p-coumaric acid (PCA) and myricetin (MY), and their effects on the in vitro maturation and developmental ability of porcine oocytes. Liquid chromatography-tandem mass spectrometry (LC-MS/MS) showed that 1 mg of SQE contained 3.92 µg of PCA and 0.19 µg of MY. The concentrations required to inhibit 50% of DPPH radicals were 2732.8 ppm, 38.8 mg/mL, and 0.110 mg/mL for SQE, PCA, and MY, respectively. The reducing power increased as the concentration increased, and the reducing power of MY was higher than that of PCA. The polar body extrusion rate was highest upon treatment with 1250 ppm SQE and 10 µM MY. The reactive oxygen species and glutathione levels were significantly decreased and increased, respectively. In a normal or peroxidative environment, the embryo development rate upon parthenogenetic activation was increased, and the total cell number, apoptosis rate, and development-related gene expression were altered to enhance embryonic development. The embryo development rate and total cell number upon somatic cell nuclear transfer did not differ between the groups. These results show that the antioxidant effects of SQE and MY enhance the in vitro maturation and subsequent embryonic development.