[Development and optimization of perfusion process for mammalian cell culture].

In recent years, the demand of biologics has increased rapidly. Cell culture process with perfusion mode has become more and more popular due to its high productivity, good quality and high efficiency. In this paper, the unique operation and the details of process optimization for perfusion culture mode are discussed by comparing with traditional batch culture process. Meanwhile, the progress and strategies in the development and optimization of perfusion culture process in recent years are summarized to provide reference for the future development of mammalian cell perfusion culture technology.

Scale-Down Model Development in ambr systems: An Industrial Perspective.

High-Throughput (HT) technologies such as miniature bioreactors (MBRs) are increasingly employed within the biopharmaceutical manufacturing industry. Traditionally, these technologies have been utilized for discrete screening approaches during pre-clinical development (e.g., cell line selection and process optimization). However, increasing interest is focused towards their use during late clinical phase process characterization studies as a scale-down model (SDM) of the cGMP manufacturing process. In this review, the authors describe a systematic approach toward SDM development in one of the most widely adopted MBRs, the ambr 15 and 250 mL (Sartorius Stedim Biotech) systems. Recent efforts have shown promise in qualifying ambr systems as SDMs to support more efficient, robust and safe biomanufacturing processes. The authors suggest that combinatorial improvements in process understanding (matching of mass transfer and cellular stress between scales through computational fluid dynamics and in vitro analysis), experimental design (advanced risk assessment and statistical design of experiments), and data analysis (combining uni- and multi-variate techniques) will ultimately yield ambr SDMs applicable for future regulatory submissions.

Tumor-infiltrating lymphocytes: Streamlining a complex manufacturing process.

Adoptive cell therapy of tumor-infiltrating lymphocytes has shown promise for treatment of refractory melanoma and other solid malignancies; however, challenges to manufacturing have limited its widespread use. Traditional manufacturing efforts were lengthy, cumbersome and used open culture systems. We describe changes in testing and manufacturing that decreased the process cycle time, enhanced the robustness of critical quality attribute testing and facilitated a functionally closed system. These changes have enabled export of the manufacturing process to support multi-center clinical trials.

A Different Perspective: How Much Innovation Is Really Needed for Monoclonal Antibody Production Using Mammalian Cell Technology?

As biopharmaceutical companies have optimized cell line and production culture process development, titers of recombinant antibodies have risen steadily to 3-8 g/L for fed-batch mammalian cultures at production scales of 10 kL or larger. Most new antibody products are produced from Chinese Hamster Ovary (CHO) cell lines, and there are relatively few alternative production hosts under active evaluation. Many companies have adopted a strategy of using the same production cell line for early clinical phases as well as commercial production, which reduces the risk of product comparability issues during the development lifecycle. Product quality and consistency expectations rest on the platform knowledge of the CHO host cell line and processes used for the production of many licensed antibodies. The lack of impact of low-level product variants common to this platform on product safety and efficacy also builds on the established commercial history of recombinant antibodies, which dates back to 1997.Efforts to increase titers further will likely yield diminishing returns. Very few products would benefit significantly from a titer greater than 8 g/L; in many cases, a downstream processing bottleneck would preclude full recovery from production-scale bioreactors for high titer processes. The benefits of a process platform based on standard fed-batch production culture include predictable scale-up, process transfer, and production within a company's manufacturing network or at a contract manufacturing organization. Furthermore, the confidence in an established platform provides key support towards regulatory flexibility (e.g., design space) for license applications following a quality-by-design strategy.These factors suggest that novel technologies for antibody production may not provide a substantial return on investment. What, then, should be the focus of future process development efforts for companies that choose to launch antibody products using their current platform? This review proposes key focus areas in an effort to continually improve process consistency, assure acceptable product quality, and establish appropriate process parameter limits to enable flexible manufacturing options.

Comparative study of therapeutic antibody candidates derived from mini-pool and clonal cell lines.

The long journey of developing a drug from initial discovery target identification to regulatory approval often leaves many patients with missed window of opportunities. Both regulatory agencies and biopharmaceutical industry continue to develop creative approaches to shorten the time of new drug development in order to deliver life-saving medicine to patients. Generally, drug substance materials to support the toxicology and early phase clinical study can only be manufactured after creating the final Master Cell Bank (MCB) of the clonally derived cell line, which normally takes 1-2 years. With recent advances in cell line development, cell culture process and analytical technologies, generating more homogeneous bulk/mini-pool population with higher productivity and acceptable quality attributes has become a norm, thereby making it possible to shorten the timeline to initiate First in Human (FIH) trial by using bulk/mini-pool generated materials to support toxicology and FIH studies. In this study, two monoclonal antibodies of different subclasses (IgG1 and IgG4) were expressed from the mini-pool cells as well as clonally derived cell lines generated from the same mini-pool. Cell growth, productivity, and product quality were compared between the materials generated from the mini-pool and clonally derived cell line. The results demonstrate the similarity of the antibody products generated from mini-pool cells and clonally derived cell lines from the same mini-pool, and strongly support the concept and feasibility of using antibody materials produced from mini-pool cultures for toxicology and FIH studies. The strategy to potentially shorten the FIH timeline is discussed. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1456-1462, 2017.

Current state and perspectives in modeling and control of human pluripotent stem cell expansion processes in stirred-tank bioreactors.

Implementation of model-based practices for process development, control, automation, standardization, and validation are important factors for therapeutic and industrial applications of human pluripotent stem cells. As robust cultivation strategies for pluripotent stem cell expansion and differentiation have yet to be determined, process development could be enhanced by application of mathematical models and advanced control systems to optimize growth conditions. Therefore, it is important to understand both the potential of possible applications and the apparent limitations of existing mathematical models to improve pluripotent stem cell cultivation technologies. In the present review, the authors focus on these issues as they apply to stem cell expansion processes. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:355-364, 2017.

Toward Sustainable Amino Acid Production.

Because the global amino acid production industry has been growing steadily and is expected to grow even more in the future, efficient production by fermentation is of great importance from economic and sustainability viewpoints. Many systems biology technologies, such as genome breeding, omics analysis, metabolic flux analysis, and metabolic simulation, have been employed for the improvement of amino acid-producing strains of bacteria. Synthetic biological approaches have recently been applied to strain development. It is also important to use sustainable carbon sources, such as glycerol or pyrolytic sugars from cellulosic biomass, instead of conventional carbon sources, such as glucose or sucrose, which can be used as food. Furthermore, reduction of sub-raw substrates has been shown to lead to reduction of environmental burdens and cost. Recently, a new fermentation system for glutamate production under acidic pH was developed to decrease the amount of one sub-raw material, ammonium, for maintenance of culture pH. At the same time, the utilization of fermentation coproducts, such as cells, ammonium sulfate, and fermentation broth, is a useful approach to decrease waste. In this chapter, further perspectives for future amino acid fermentation from one-carbon compounds are described.

New biotechnological applications for Ashbya gossypii: Challenges and perspectives.

The filamentous fungus Ashbya gossypii has long been considered a paradigm of the White Biotechnology in what concerns riboflavin production. Its industrial relevance led to the development of a significant molecular and in silico modeling toolbox for its manipulation. This, together with the increasing knowledge of its genome and metabolism has helped designing effective metabolic engineering strategies for optimizing riboflavin production, but also for developing new A. gossypii strains for novel biotechnological applications, such as production of recombinant proteins, single cell oils (SCOs), and flavour compounds. With the recent availability of its genome-scale metabolic model, the exploration of the full biotechnological potential of A. gossypii is now in the spotlight. Here, we will discuss some of the challenges that these emerging A. gossypii applications still need to overcome to become economically attractive and will present future perspectives for these and other possible biotechnological applications for A. gossypii.

Heralding a new paradigm in 3D tumor modeling.

Numerous studies to date have contributed to a paradigm shift in modeling cancer, moving from the traditional two-dimensional culture system to three-dimensional (3D) culture systems for cancer cell culture. This led to the inception of tumor engineering, which has undergone rapid advances over the years. In line with the recognition that tumors are not merely masses of proliferating cancer cells but rather, highly complex tissues consisting of a dynamic extracellular matrix together with stromal, immune and endothelial cells, significant efforts have been made to better recapitulate the tumor microenvironment in 3D. These approaches include the development of engineered matrices and co-cultures to replicate the complexity of tumor-stroma interactions in vitro. However, the tumor engineering and cancer biology fields have traditionally relied heavily on the use of cancer cell lines as a cell source in tumor modeling. While cancer cell lines have contributed to a wealth of knowledge in cancer biology, the use of this cell source is increasingly perceived as a major contributing factor to the dismal failure rate of oncology drugs in drug development. Backing this notion is the increasing evidence that tumors possess intrinsic heterogeneity, which predominantly homogeneous cancer cell lines poorly reflect. Tumor heterogeneity contributes to therapeutic resistance in patients. To overcome this limitation, cancer cell lines are beginning to be replaced by primary tumor cell sources, in the form of patient-derived xenografts and organoids cultures. Moving forward, we propose that further advances in tumor engineering would require that tumor heterogeneity (tumor variants) be taken into consideration together with tumor complexity (tumor-stroma interactions). In this review, we provide a comprehensive overview of what has been achieved in recapitulating tumor complexity, and discuss the importance of incorporating tumor heterogeneity into 3D in vitro tumor models. This work carves out the roadmap for 3D tumor engineering and highlights some of the challenges that need to be addressed as we move forward into the next chapter.

Stem cells: to be born great, achieve greatness, or have greatness thrust upon them?

Induced pluripotent stem cells (iPSCs) have opened new doors in providing an ethical, patient-specific cell source towards tissue engineering. Developing these therapies involves the production of reprogrammed iPSCs, expanding them while maintaining pluripotency, then differentiating them into functional tissues. To bring these therapies to the clinic, efficient and GMP-compliant manufacturing methods are required. In this Research Highlight, we describe recent innovations to several aspects of the pluripotent cell therapy pipeline.

Next generation tools to accelerate the synthetic biology process.

Synthetic biology follows the traditional engineering paradigm of designing, building, testing and learning to create new biological systems. While such approaches have enormous potential, major challenges still exist in this field including increasing the speed at which this workflow can be performed. Here, we present recently developed microfluidic tools that can be used to automate the synthetic biology workflow with the goal of advancing the likelihood of producing desired functionalities. With the potential for programmability, automation, and robustness, the integration of microfluidics and synthetic biology has the potential to accelerate advances in areas such as bioenergy, health, and biomaterials.

Technological developments for small-scale downstream processing of cell therapies.

Despite considerable regulatory and clinical hurdles, the development and use of cell-based therapies are gaining momentum. As more of these therapies move toward commercial approval and larger-scale distribution, associated manufacturing and processing technologies are being advanced. Modern technologies directed at downstream processing seek to distribute such therapies from the manufacturing site to the patient more efficiently and reliably. Novel small-scale downstream solutions boost the transformation of cell therapies from abstraction to reality.

Industrial systems biology and its impact on synthetic biology of yeast cell factories.

Engineering industrial cell factories to effectively yield a desired product while dealing with industrially relevant stresses is usually the most challenging step in the development of industrial production of chemicals using microbial fermentation processes. Using synthetic biology tools, microbial cell factories such as Saccharomyces cerevisiae can be engineered to express synthetic pathways for the production of fuels, biopharmaceuticals, fragrances, and food flavors. However, directing fluxes through these synthetic pathways towards the desired product can be demanding due to complex regulation or poor gene expression. Systems biology, which applies computational tools and mathematical modeling to understand complex biological networks, can be used to guide synthetic biology design. Here, we present our perspective on how systems biology can impact synthetic biology towards the goal of developing improved yeast cell factories. Biotechnol. Bioeng. 2016;113: 1164-1170. © 2015 Wiley Periodicals, Inc.

Biology and Industrial Applications of Chlorella: Advances and Prospects.

Chlorella represents a group of eukaryotic green microalgae that has been receiving increasing scientific and commercial interest. It possesses high photosynthetic ability and is capable of growing robustly under mixotrophic and heterotrophic conditions as well. Chlorella has long been considered as a source of protein and is now industrially produced for human food and animal feed. Chlorella is also rich in oil, an ideal feedstock for biofuels. The exploration of biofuel production by Chlorella is underway. Chlorella has the ability to fix carbon dioxide efficiently and to remove nutrients of nitrogen and phosphorous, making it a good candidate for greenhouse gas biomitigation and wastewater bioremediation. In addition, Chlorella shows potential as an alternative expression host for recombinant protein production, though challenges remain to be addressed. Currently, omics analyses of certain Chlorella strains are being performed, which will help to unravel the biological implications of Chlorella and facilitate the future exploration of industrial applications.

Bioengineering for Organ Transplantation: Progress and Challenges.

Organ transplantation can offer a curative option for patients with end stage organ failure. Unfortunately the treatment is severely limited by the availability of donor organs. Organ bioengineering could provide a solution to the worldwide critical organ shortage. The majority of protocols to date have employed the use of decellularization-recellularization technology of naturally occurring tissues and organs with promising results in heart, lung, liver, pancreas, intestine and kidney engineering. Successful decellularization has provided researchers with suitable scaffolds to attempt cell reseeding. Future work will need to focus on the optimization of organ specific recellularization techniques before organ bioengineering can become clinically translatable. This review will examine the current progress in organ bioengineering and highlight future challenges in the field.

Developing diatoms for value-added products: challenges and opportunities.

As a major primary producer in marine environments, diatoms have been considered as promising feedstocks for their applications in functional foods, bioactive pharmaceuticals, and cosmetics. This review focuses on the biotechnology potential of diatoms for value-added products like carotenoids. The impact of abiotic environmental stresses, such as intensity and quality of incident light, nutrient deficiency and silicon depletion, on diatoms has been examined to determine key factors that affect the growth performance and the accumulation of valuable compounds. Previous studies suggested that adaptive evolution could be an efficient method to improve the diatom productivity of valuable compounds. Light emitting diode (LED)-based photobioreactors were introduced and proposed as a promising new technology for producing quality products from diatoms. Currently available molecular biology tools were also summarized and discussed in relation to their application in the production of carotenoids and other valuable products. Taken together, systems biology and synthetic biology approaches have the potential to address the challenges faced while working toward the industrial application of diatoms.

Developing cellular systems in vitro to simulate regeneration.

In the past two decades, cellular systems in vitro have progressed from predominantly monocellular testing models to study the toxic effects of new biomaterials for replacement to relevant human coculture systems for regeneration, often a combination of progenitor cells with novel biomaterials. Considerable progress has been made in understanding cellular cross talk and its contribution to the vascularization of bone. Future challenges include using the established physiological, that is, nonactivated, stem cell niches as a platform to develop coculture models, which will enable the true in situ regenerative niche to be investigated. Hypoxia and a changing inflammatory status are factors that need to be incorporated. Major advances in polymer synthesis permitting the incorporation of specific biologically relevant signals in hydrogels will help make this a reality.