Responses of physiological, microbiome and lipid metabolism to lignocellulose wastes in gut of yellow mealworm (Tenebrio molitor).

There is limited research on physiological and degradation mechanisms of yellow mealworm, a novel organic waste converter, in processing lignocellulosic wastes. This study has selected two types of lignocellulosic wastes, distillers' grains (DG) and maize straw (MS), to feed yellow mealworms. This study investigated the effects of lignocellulosic wastes on the growth, antioxidant system, microbiome, and lipidome of yellow mealworms. The relative growth of lignocellulosic waste group was not significantly different from wheat bran. The antioxidant level was elevated in DG. MS was significantly enriched in cellulose-degrading bacteria in the gut and was accompanied by disturbances in lipid metabolism. The correlation coefficients were used to construct a network connecting diet, microbiota, and lipids. The correlation analysis indicated that two sphingolipids, hexylglyceramide and dihydroglyceramide, were strongly and positively linked with the dominating species. This study provides comprehensive information on physiological and mechanism of mealworms in process of treating lignocellulosic waste.

Biodegradation of aged polyethylene (PE) and polystyrene (PS) microplastics by yellow mealworms (Tenebrio molitor larvae).

Globally, over 287 million tons of plastic are disposed in landfills, rivers, and oceans or are burned every year. The results are devastating to our ecosystems, wildlife and human health. One promising remedy is the yellow mealworm (Tenebrio molitor larvae), which has proved capable of degrading microplastics (MPs). This paper presents a new investigation into the biodegradation of aged polyethylene (PE) film and polystyrene (PS) foam by the Tenebrio molitor larvae. After a 35 - day feeding period, both pristine and aged MPs can be consumed by larvae. Even with some inhibitions in larvae growth due to the limited nutrient supply of aged MPs, when compared with pristine MPs, the aged MPs were depolymerized more efficiently in gut microbiota based on gel permeation chromatography (GPC) and Fourier transform infrared spectroscopy (FTIR) analysis. With the change in surface chemical properties, the metabolic intermediates of aged MPs contained more oxygen-containing functional groups and shortened long-chain alkane, which was confirmed by gas chromatography and mass spectrometry (GC-MS). High-throughput sequencing revealed that the richness and diversity of gut microbes were restricted in the MPs-fed group. Although MPs had a negative effect on the relative abundance of the two dominant bacteria Enterococcaceae and Lactobacillaceae, the aged MPs may promote the relative abundance of Enterobacteriaceae and Streptococcaceae. Redundancy analysis (RDA) further verified that the aged MPs are effectively biodegraded by yellow mealworm. This work provides new insights into insect-mediated mechanisms of aged MP degradation and promising strategies for MP sustainable and efficient solutions.

Effects of dietary urea supplementation on performance of selected insect species.

Feeding costs of farmed insects may be reduced by applying alternative nitrogen sources such as urea that can partly substitute true proteins. The aim of this study was to examine the effects of different nitrogen sources on body weight (BW) and survival rate (SR) of the Jamaican field cricket (JFC, Gryllus assimilis), the house cricket (HC, Acheta domesticus), yellow mealworm larvae (YM, Tenebrio molitor) and superworm larvae (SW, Zophobas morio). Crickets were either housed individually or in groups, and larvae were group-housed. Six isonitrogenous feeds composed of 3.52% nitrogen were designed for all four insect species using four independent replicates with micellar casein: urea proportions of 100-0%, 75-25%, 50-50%, 25-75%, 0-100% and 100% extracted soybean meal. All selected insect species were able to utilise urea. However, urea as the only nitrogen source resulted in low final BW. In the HC, the JFC, and the YM on nitrogen basis urea can replace 25% of micellar casein without having any negative effects on BW and SR in comparison to the 100% micellar casein group. In the SW, a 25% urea level did not have a significant effect on final BW, but SR decreased significantly.

Molecular-Weight-Dependent Degradation of Plastics: Deciphering Host-Microbiome Synergy Biodegradation of High-Purity Polypropylene Microplastics by Mealworms.

The biodegradation of polypropylene (PP), a highly persistent nonhydrolyzable polymer, by Tenebrio molitor has been confirmed using commercial PP microplastics (MPs) (Mn 26.59 and Mw 187.12 kDa). This confirmation was based on the reduction of the PP mass, change in molecular weight (MW), and a positive Δδ13C in the residual PP. A MW-dependent biodegradation mechanism was investigated using five high-purity PP MPs, classified into low (0.83 and 6.20 kDa), medium (50.40 and 108.0 kDa), and high (575.0 kDa) MW categories to access the impact of MW on the depolymerization pattern and associated gene expression of gut bacteria and the larval host. The larvae can depolymerize/biodegrade PP polymers with high MW although the consumption rate and weight losses increased, and survival rates declined with increasing PP MW. This pattern is similar to observations with polystyrene (PS) and polyethylene (PE), i.e., both Mn and Mw decreased after being fed low MW PP, while Mn and/or Mw increased after high MW PP was fed. The gut microbiota exhibited specific bacteria associations, such as Kluyvera sp. and Pediococcus sp. for high MW PP degradation, Acinetobacter sp. for medium MW PP, and Bacillus sp. alongside three other bacteria for low MW PP metabolism. In the host transcriptome, digestive enzymes and plastic degradation-related bacterial enzymes were up-regulated after feeding on PP depending on different MWs. The T. molitor host exhibited both defensive function and degradation capability during the biodegradation of plastics, with high MW PP showing a relatively negative impact on the larvae.

Biodegradation of various grades of polyethylene microplastics by Tenebrio molitor and Tenebrio obscurus larvae: Effects on their physiology.

Polyethylene (PE) is the most productive plastic product and includes three major polymers including high-density polyethylene (HDPE), linear low-density polyethylene (LLDPE) and low-density polyethylene (LDPE) variation in the PE depends on the branching of the polymer chain and its crystallinity. Tenebrio obscurus and Tenebrio molitor larvae biodegrade PE. We subsequently tested larval physiology, gut microbiome, oxidative stress, and PE degradation capability and degradation products under high-purity HDPE, LLDPE, and LDPE powders (<300 µm) diets for 21 days at 65 ± 5% humidity and 25 ± 0.5 °C. Our results demonstrated the specific PE consumption rates by T. molitor was 8.04-8.73 mg PE ∙ 100 larvae-1⋅day-1 and by T. obscurus was 7.68-9.31 for LDPE, LLDPE and HDPE, respectively. The larvae digested nearly 40% of the ingested three PE and showed similar survival rates and weight changes but their fat content decreased by 30-50% over 21-day period. All the PE-fed groups exhibited adverse effects, such as increased benzoquinone concentrations, intestinal tissue damage and elevated oxidative stress indicators, compared with bran-fed control. In the current study, the digestive tract or gut microbiome exhibited a high level of adaptability to PE exposure, altering the width of the gut microbial ecological niche and community diversity, revealing notable correlations between Tenebrio species and the physical and chemical properties (PCPs) of PE-MPs, with the gut microbiome and molecular weight change due to biodegradation. An ecotoxicological simulation by T.E.S.T. confirmed that PE degradation products were little ecotoxic to Daphnia magna and Rattus norvegicus providing important novel insights for future investigations into the environmentally-friendly approach of insect-mediated biodegradation of persistent plastics.

Go local: Enhancing sustainable production of Tenebrio molitor through valorization of locally available agricultural byproducts.

Insects receive increasing attention as an alternative source of protein for animals and humans, and thus, the production of low-cost insects for meeting the dietary demand on sustained basis is an ever-growing concept. This study aims to design dietswith locally available agricultural byproducts from Greece as feed for larvae of the yellow mealworm, Tenebrio molitor L. (Coleoptera: Tenebrionidae). This will considerably reduce the cost of insect feed and the environmental impact of insect farming by using locally available agricultural byproducts as economic insect feedstock. More specifically, five agricultural byproducts derived from the production of cereals and legumes were utilized to design twelve different diets at two protein levels, i.e., 17.4 and 22.5% protein content. All diets were evaluated both at laboratory scale, but also at pilot scale. Based on the obtained results, both bioassays revealed that the diets contained one legume and one cereal byproduct (i.e., lupin and triticale as well as lupin and oat) supported more efficiently the growth and performance of the larvae, irrespective of the protein level. Indicatively, individual larval weight of the best performed larvae from both groups ranged from 132 to 142 mg. Moreover, our results highlight the fact that data derived from laboratory scale bioassays are not always easy to be extrapolated to industrial production. For instance, the total harvest of larvae, a parameter assessed in the tray scale bioassay, exhibited a disparity between diet A2 (910 g) and diet A3 (749 g), despite both being deemed optimal in the laboratory-scale experiment. Our study aims to promote a circular approach for the industrial rearing of insects through integration of local agricultural byproducts into specific diets for T. molitor larvae.

Differences in ingestion and biodegradation of the melamine formaldehyde plastic by yellow mealworms Tenebrio molitor and superworms Zophobas atratus, and the prediction of functional gut microbes.

Plastics biodegradation by insect larvae is considered as a new strategy for plastic wastes treatment. To uncover the biodegradation of a more complex chemical polymer of melamine formaldehyde (MF) by insect larvae, two worm species of yellow mealworm Tenebrio molitor and superworm Zophobas atratus were fed on MF foam as sole diet for 45 days with sole bran diet as control. Although the MF foam consumption by yellow mealworms of 0.38 mg/d/g-larvae was almost 40% higher than that by superworms of 0.28 mg/d/g-larvae, a similar decrease of survival rates in both species were obtained at about 58%, indicating the adverse effects on their growth. Depolymerization and biodegradation of MF foam occurred in both larval guts, but was more extensive in yellow mealworms. MF foam sole diet influenced gut bacterial and fungal microbiomes of both larvae species, which were assessed by Illumina MiSeq on day 45. Compared to the bran-fed group, both gut bacterial and fungal communities significantly changed in MF-fed groups, but differed in the two larvae species. The results demonstrated a strong association between the distinctive gut microbiome and MF foam degradation, such as unclassified Enterobacteriaceae, Hyphopichia and Issatchenkia. However, sole MF foam diet negatively influenced worms, like lower survival rates and gut abnormalities. In summary, MF foam could be degraded by both yellow mealworms and superworms, albeit with adverse effects. Gut microbes were strongly associated to MF foam degradation, especially the gut fungi.

Properties of co-gel between Tenebrio Molitor larvae protein and myofibrillar protein induced by transglutaminase.

This study explored the effect of adding transglutaminase (TGase) to a co-gel of Tenebrio Molitor larvae protein (TMLP) and myofibrillar protein (MP). Different concentrations of TGase (0-90 U/g) were added to the co-gel. The results showed that 60 U/g TGase treatment significantly improved the gel strength and water holding capacity (WHC) by 26.51 g and 9.2 %, respectively. TGase promoted the rheological properties and accelerated the three-dimensional network structure of the co-gel. Moreover, TGase significantly increased (P < 0.05) the tyrosine residues, tryptophan residues content and hydrophobic interactions of the aliphatic groups. The chemical forces between the protein molecules changed. TGase promoted the transition of α-helix to ß-sheet and free water to immobilized water, thereby improving the WHC of co-gel. The principal component analysis reflected the links among indicators. This study illustrated that TGase might be an effective strategy to improve the co-gel of TMLP and MP and emulsified meat products with insects.

Biodegradation of polyethylene terephthalate by Tenebrio molitor: Insights for polymer chain size, gut metabolome and host genes.

Polyethylene terephthalate (PET or polyester) is a commonly used plastic and also contributes to the majority of plastic wastes. Mealworms (Tenebrio molitor larvae) are capable of biodegrading major plastic polymers but their degrading ability for PET has not been characterized based on polymer chain size molecular size, gut microbiome, metabolome and transcriptome. We verified biodegradation of commercial PET by T. molitor larvae in a previous report. Here, we reported that biodegradation of commercial PET (Mw 29.43 kDa) was further confirmed by using the δ13C signature as an indication of bioreaction, which was increased from - 27.50‰ to - 26.05‰. Under antibiotic suppression of gut microbes, the PET was still depolymerized, indicating that the host digestive enzymes could degrade PET independently. Biodegradation of high purity PET with low, medium, and high molecular weights (MW), i.e., Mw values of 1.10, 27.10, and 63.50 kDa with crystallinity 53.66%, 33.43%, and 4.25%, respectively, showed a mass reduction of > 95%, 86%, and 74% via broad depolymerization. Microbiome analyses indicated that PET diets shifted gut microbiota to three distinct structures, depending on the low, medium, and high MW. Metagenome sequencing, transcriptomic, and metabolic analyses indicated symbiotic biodegradation of PET by the host and gut microbiota. After PET was fed, the host's genes encoding degradation enzymes were upregulated, including genes encoding oxidizing, hydrolyzing, and non-specific CYP450 enzymes. Gut bacterial genes for biodegrading intermediates and nitrogen fixation also upregulated. The multiple-functional metabolic pathways for PET biodegradation ensured rapid biodegradation resulting in a half-life of PET less than 4 h with less negative impact by PET MW and crystallinity.

Characterization of Priestia megaterium S1, a polymer degrading gut microbe isolated from the gut of Tenebrio molitor larvae fed on Styrofoam.

This study reveals that Tenebrio molitor larvae are fed with two different feeds i.e., barley bran along with Styrofoam, and barley bran without Styrofoam, the survival percentage of mealworms shows 86 and 89%, respectively. Five isolates namely S1, S2, S3, S4, and S5 were isolated from the gut of Styrofoam-feeding Tenebrio molitor larvae and tested for Hydrophobicity percentage, clear zone assay and turbidity measurement. S1 isolate showed best (turbidity percentage of 19.65%, 13.54% hydrophobicity percentage, and 37% zone of clearance) when compared to other isolates, respectively. 16S rRNA characterization of S1 isolate revealed that the isolate belongs to Priestia megaterium S1(ON024787). Biodegradation of PE and PS beads by Priestia megaterium S1 makes physical and structural changes over 180 days, after microbial adhesion to the beads. Growth parameters have shown that the Priestia megaterium S1 thrives more effectively in the pH (6.5), temperature (28 °C) and at 1.5% LDPE/HDPE/PS concentration there is maximum utilization of carbon and a high percentage survival rate. Significant colonization of the isolate after 30 days over beads of LDPE (52.47%), HDPE (49.26%), and PS (48.11%), respectively. Experimental data revealed that Priestia megaterium S1 have PE and PS beads degradation capacity, proven by weight loss studies, at 6th-month percentage weight loss of LDPE (36.1%), HDPE (31.9%), and PS (28.6%), the percentage loss of carbon and hydrogen shows higher when compared to control. One month Biological Oxygen Demand (BOD) showed that LDPE (7.4 mg/l), HDPE (7.2 mg/l), PS (6.7 mg/l), and simultaneous studies on CO2 evolution over LDPE treatment is 5.05 g/l, HDPE (4.26 g/l), and PS (3.91 g/l), respectively. Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscope (SEM) prove the occurrence of biodegradation on the surface of beads. This work highlights that Priestia megaterium S1 plays a vital role in effectively degrading PE and PS beads.

The Genome of the Yellow Mealworm, Tenebrio molitor: It's Bigger Than You Think.

BACKGROUND: Insects are a sustainable source of protein for human food and animal feed. We present a genome assembly, CRISPR gene editing, and life stage-specific transcriptomes for the yellow mealworm, Tenebrio molitor, one of the most intensively farmed insects worldwide. METHODS: Long and short reads and long-range data were obtained from a T. molitor male pupa. Sequencing transcripts from 12 T. molitor life stages resulted in 279 million reads for gene prediction and genetic engineering. A unique plasmid delivery system containing guide RNAs targeting the eye color gene vermilion flanking the muscle actin gene promoter and EGFP marker was used in CRISPR/Cas9 transformation. RESULTS: The assembly is approximately 53% of the genome size of 756.8 ± 9.6 Mb, measured using flow cytometry. Assembly was complicated by a satellitome of at least 11 highly conserved satDNAs occupying 28% of the genome. The injection of the plasmid into embryos resulted in knock-out of Tm vermilion and knock-in of EGFP. CONCLUSIONS: The genome of T. molitor is longer than current assemblies (including ours) due to a substantial amount (26.5%) of only one highly abundant satellite DNA sequence. Genetic sequences and transformation tools for an insect important to the food and feed industries will promote the sustainable utilization of mealworms and other farmed insects.

Unveiling Fragmentation of Plastic Particles during Biodegradation of Polystyrene and Polyethylene Foams in Mealworms: Highly Sensitive Detection and Digestive Modeling Prediction.

It remains unknown whether plastic-biodegrading macroinvertebrates generate microplastics (MPs) and nanoplastics (NPs) during the biodegradation of plastics. In this study, we utilized highly sensitive particle analyzers and pyrolyzer-gas chromatography mass spectrometry (Py-GCMS) to investigate the possibility of generating MPs and NPs in frass during the biodegradation of polystyrene (PS) and low-density polyethylene (LDPE) foams by mealworms (Tenebrio molitor larvae). We also developed a digestive biofragmentation model to predict and unveil the fragmentation process of ingested plastics. The mealworms removed 77.3% of ingested PS and 71.1% of ingested PE over a 6-week test period. Biodegradation of both polymers was verified by the increase in the δ13C signature of residual plastics, changes in molecular weights, and the formation of new oxidative functional groups. MPs accumulated in the frass due to biofragmentation, with residual PS and PE exhibiting the maximum percentage by number at 2.75 and 7.27 µm, respectively. Nevertheless, NPs were not detected using a laser light scattering sizer with a detection limit of 10 nm and Py-GCMS analysis. The digestive biofragmentation model predicted that the ingested PS and PE were progressively size-reduced and rapidly biodegraded, indicating the shorter half-life the smaller plastic particles have. This study allayed concerns regarding the accumulation of NPs by plastic-degrading mealworms and provided critical insights into the factors controlling MP and NP generation during macroinvertebrate-mediated plastic biodegradation.

Ingestion and biodegradation of disposable surgical masks by yellow mealworms Tenebrio molitor larvae: Differences in mask layers and effects on the larval gut microbiome.

During the COVID-19 pandemic, the usage and production of face masks considerably increased, resulting in large quantities of mask waste accumulating in the natural environment. To investigate whether masks of polypropylene (PP) material could be ingested and degraded by insect worms like PP foam plastic, yellow mealworms were provided with different layers of disposable surgical masks as sole diets for 30 d. Although mask layers, especially the middle layer of melt-blown filter, could be ingested by yellow mealworms, sole mask layer diets had adverse effects on the larval survival and growth. Analyses of Fourier transform infrared spectroscopy, differential scanning calorimeter and thermogravimetric, and gel permeation chromatography demonstrated the changes of functional groups, thermostability and molecular weights in frass compared to original masks, indicating the partial oxidation and degradation of masks. And the depolymerization of the middle layer of masks by yellow mealworms was different from that of other layers. The larval gut bacterial and fungal microbiomes were assessed by Illumina MiSeq, indicating that both of them shifted upon sole layer mask diets. Changes in relative abundances of dominant bacterial and fungal genera demonstrated the strong association between gut microbiome and mask degradation. For instance, unclassified Enterobacteriaceae was closely associated with outer layers degradation. Lactococcus and unclassified Ascomycota were responsible for middle layers degradation, while Lactococcus and Morganella for inner layers degradation. In conclusion, disposable surgical masks of PP material could be ingested and biodegraded by yellow mealworms. The diversities of gut bacterial and fungal microbiomes were associated with the differences in rigid crystalline structures of the layer masks.

Biodegradation of polyvinyl chloride, polystyrene, and polylactic acid microplastics in Tenebrio molitor larvae: Physiological responses.

It is widely understood that microplastics (MPs) can induce various biological stresses in macroinvertebrates that are incapable of biodegrading plastics. However, the biodegradation and physiological responses of plastic-degrading macroinvertebrates toward MPs of different degradability levels remain unexplored. In this study, Tenebrio molitor larvae (mealworms) were selected as a model of plastics-degrading macroinvertebrate, and were tested against three common plastics of different degradability rankings: polyvinyl chloride (PVC), polystyrene (PS), and polylactic acid (PLA) MPs (size <300 µm). These three MPs were biodegraded with the rate sequence of PLA > PS > PVC, resulting in a reversed order of negative physiological responses (body weight loss, decreased survival, and biomass depletion) of mealworms. Simultaneously, the levels of reactive oxygen species (ROS), antioxidant enzyme activities, and lipid peroxidation were uniformly increased as polymer degradability decreased and intermediate toxicity increased. PVC MPs exhibited higher toxicity than the other two polymers. The oxidative stresses were effectively alleviated by supplementing co-diet bran. The T. molitor larvae fed with PLA plus bran showed sustainable growth without an increase in oxidative stress. The results provide new insights into the biotoxicity of MPs on macroinvertebrates and offer comprehensive information on the physiological stress responses of plastic-degrading macroinvertebrates during the biodegradation of plastics with different degradability levels.

Enzymatic Characterization of a Novel HSL Family IV Esterase EstD04 from Pseudomonas sp. D01 in Mealworm Gut Microbiota.

Pseudomonas sp. D01, capable of growing in tributyrin medium, was isolated from the gut microbiota of yellow mealworm. By using in silico analyses, we discovered a hypothesized esterase encoding gene in the D01 bacterium, and its encoded protein, EstD04, was classified as a bacterial hormone-sensitive lipase (bHSL) of the type IV lipase family. The study revealed that the recombinant EstD04-His(6x) protein exhibited esterase activity and broad substrate specificity, as it was capable of hydrolyzing p-nitrophenyl derivatives with different acyl chain lengths. By using the most favorable substrate p-nitrophenyl butyrate (C4), we defined the optimal temperature and pH value for EstD04 esterase activity as 40 °C and pH 8, respectively, with a catalytic efficiency (kcat/Km) of 6.17 × 103 mM-1 s-1 at 40 °C. EstD04 demonstrated high stability between pH 8 and 10, and thus, it might be capably used as an alkaline esterase in industrial applications. The addition of Mg2+ and NH4+, as well as DMSO, could stimulate EstD04 enzyme activity. Based on bioinformatic motif analyses and tertiary structural simulation, we determined EstD04 to be a typical bHSL protein with highly conserved motifs, including a triad catalytic center (Ser160, Glu253, and His283), two cap regions, hinge sites, and an oxyanion hole, which are important for the type IV enzyme activity. Moreover, the sequence analysis suggested that the two unique discrete cap regions of EstD04 may contribute to its alkali mesophilic nature, allowing EstD04 to exhibit extremely distinct physiological properties from its evolutionarily closest esterase.

The nutritional profile, mineral content and heavy metal uptake of yellow mealworm reared with supplementation of agricultural sidestreams.

Insect farming, a potential approach to deal with the increasing global protein demand, is a new activity in the Western world with many unanswered questions regarding product quality and safety. Insects may fulfill an important role in a circular economy by upcycling biowaste into valuable biomass. About half of the total mass of mealworm feeding substrates exists out of wet feed. This can be sourced from biowaste, increasing the sustainability of insect farming. This paper reports on the nutritional profile of yellow mealworm, Tenebrio molitor, reared with supplementation of organic sidestreams. These included unsold vegetables, potato cuttings, fermented chicory roots and horticultural foliage. The evaluation was performed by analyzing proximate compositions, fatty acid profiles, mineral and heavy metal contents. Mealworms fed with potato cuttings doubled their fat content and increased saturated and mono-unsaturated fatty acids. Providing fermented chicory roots increased the mineral content and accumulated heavy metals. Additionally, the uptake of minerals by mealworms was selective as only calcium, iron and manganese concentrations increased. Adding vegetable mix or horticultural foliage to the diet did not significantly change the nutritional profile. In conclusion, sidestreams were successfully recycled into protein-rich biomass and their nutrient content and bio-availability influenced the composition of mealworms.

Biodegradation of additive-free polypropylene by bacterial consortia enriched from the ocean and from the gut of Tenebrio molitor larvae.

Accumulation of highly recalcitrant PP wastes has caused a serious environmental pollution. We evaluated the biodegradation of two types of additive-free PP polymers by microbial degraders from different environments. Two bacterial consortia, designated as PP1M and PP2G, were enriched from the ocean and from the guts of Tenebrio molitor larvae. Both consortia were able to utilize each of two different additive-free PP plastics with relatively low molecular weights (low molecular weight PP powder and amorphous PP pellets) as the sole carbon source for growth. After a 30-day incubation, several plastic characterization methods, including high-temperature gel permeation chromatography, scanning electron microscopy, Fourier transform infrared spectroscopy, and differential scanning calorimetry, were used to characterize the PP samples. The bio-treated PP powder was covered with tight biofilms and extracellular secretions with significantly increased hydroxyl and carbonyl groups and slightly decreased methyl groups. This suggested that degradation and oxidation had occurred. The altered molecular weights and the increased melting enthalpy and average crystallinity of the bio-treated PP samples all suggested that both consortia preferred to depolymerize and degrade the fractions with molecular weights of ≤34 kDa and the amorphous phase fractions of the two types of PP. Furthermore, low molecular weight PP powder was more susceptible to bacterial degradation compared to amorphous PP pellets. This study provides a unique example of different types of additive-free PP degradation by different culturable bacteria from the ocean and insect guts as well as a feasibility of PP waste removal in different environments.

Responses of gut microbiomes to commercial polyester polymer biodegradation in Tenebrio molitor Larvae.

Polyethylene terephthalate (PET) is a mass-produced fossil-based plastic polymer that contributes to catastrophic levels of plastic pollution. Here we demonstrated that Tenebrio molitor (mealworms) was capable of rapidly biodegrading two commercial PET resins (microplastics) with respective weight-average molecular weight (Mw) of 39.33 and 29.43 kDa and crystallinity of 22.8 ± 3.06% and 18 ± 2.25%, resulting in an average mass reduction of 71.03% and 73.28% after passage of their digestive tract, and respective decrease by 9.22% and 11.36% in Mw of residual PET polymer in egested frass. Sequencing of 16 S rRNA gene amplicons of gut microbial communities showed that dominant bacterial genera were enriched and associated with PET degradation. Also, PICRUSt prediction exhibited that oxidases (monooxygenases and dioxygenases), hydrolases (cutinase, carboxylesterase and chitinase), and PET metabolic enzymes, and chemotaxis related functions were up-regulated in the PET-fed larvae. Additionally, metabolite analyses revealed that PET uptake caused alterations of stress response and plastic degradation related pathways, and lipid metabolism pathways in the T. molitor larvae could be reprogrammed when the larvae fed on PET. This study provides new insights into gut microbial community adaptation to PET diet under nutritional stress (especially nitrogen deficiency) and its contribution to PET degradation.

Yellow Mealworm (Tenebrio molitor) and Lesser Mealworm (Alphitobius diaperinus) Proteins Slowed Weight Gain and Improved Metabolism of Diet-Induced Obesity Mice.

BACKGROUND: High-protein diets not only meet amino acid needs but also modulate satiety and energy metabolism. Insect-based proteins are sustainable, high-quality proteins. Mealworms have been studied, but limited information is known about their ability to impact metabolism and obesity. OBJECTIVE: We determined the effects of defatted yellow mealworm (Tenebrio molitor)- and whole lesser mealworm (Alphitobius diaperinus)-based proteins on the body weight (BW), serum metabolites, and liver and adipose tissue (AT) histology and gene expression of diet-induced obesity mice. METHODS: Male C57BL/6J mice were fed a high-fat diet (HFD; 46% kcal) to induce obesity and metabolic syndrome. Obese mice were then assigned to treatments (n = 10/group) and fed for 8 wk: HFD: HFD with casein protein; B50: HFD with 50% protein from whole lesser mealworm; B100: HFD with 100% protein from whole lesser mealworm; Y50: HFD with 50% protein from defatted yellow mealworm; Y100: HFD with 100% protein from defatted yellow mealworm. Lean mice (n = 10) fed a low-fat-diet (LFD; 10% kcal) were included. Longitudinal food intake, BW, body composition, and glucose response were measured. At time of killing, serum metabolites, tissue histopathology and gene expression, and hepatic triglycerides were analyzed. RESULTS: After 8 wk, HFD, B50, and B100 had greater (P < 0.05) weight gain than LFD, whereas Y50 and Y100 did not. Y50, B100, and Y100 had a lower (P < 0.05) BW change rate than HFD. Mealworm-based diets led to increased (P < 0.05) serum high-density lipoprotein (HDL) and reduced (P < 0.05) serum low-density lipoprotein (LDL) concentrations and reduced (P<0.05) LDL/HDL ratio. Mealworm-based diets led to increased (P < 0.05) hepatic expression of genes related to energy balance, immune response, and antioxidants and reduced (P < 0.05) AT expression of genes associated with inflammation and apoptosis. Mealworm-based diets altered (P < 0.05) hepatic and AT expression of glucose and lipid metabolism genes. CONCLUSIONS: In addition to serving as an alternative protein source, mealworms may confer health benefits to obese patients.

Ingestion of Nylon 11 Polymers by the Mealworm (Tenebrio molitor) Beetle and Subsequent Enrichment of Monomer-Metabolizing Bacteria in Fecal Microbiome.

BACKGROUND: Nylon 11 is a synthetic plastic widely used in commercial products such as tubing for automobiles, offshore oilfields, and medical devices. An increasing amount of nylon and other plastic wastes have been released into various environments, posing ecological threats. The biodegradation of bundled nylon polymers has been considered impossible due to their crystalline structures. METHODS: Nylon 11 film was created and incubated with adult mealworms. The mass, as well as structures, of nylon 11 films at pre- and post-incubation with beetles were compared. The number of nylon 11 monomer degrading bacteria in feces were determined by culture-dependent approach. The t-test was utilized to examine the statistical significance. RESULTS: We discovered that adult mealworm (Tenebrio molitor) beetle can ingest nylon 11 when stretched thin. The microscopic observation of their feces did not identify the presence of large fragments of nylon 11. The analysis of fecal bacteria revealed that while the total number of culturable bacteria did not change significantly, the number of 11-aminoundecanoic acid-metabolizing bacteria increased by 10,000-fold. CONCLUSIONS: Our results suggest that bundled nylon 11 polymers were fragmented into smaller pieces, including monomeric units (11-aminoundecanoic acid) by adult mealworm. The monomers seem to have supported the proliferation of gut microbial communities capable of utilizing 11-aminoundecanoic acid as a carbon and nitrogen source. Our work implies the potential use of the mealworm beetle as a means to fragment nylon polymers for remediation applications.