Superior Pain Reduction with Anteromedialization Tibial Tubercle Osteotomy Versus Non-Operative Management for Patellofemoral Osteoarthritis.

PURPOSE: The purpose of this study was to compare the clinical outcomes of patients with patellofemoral osteoar-thritis (PFOA) treated non-operatively with those treated operatively with an unloading anteromedialization tibial tubercle osteotomy (TTO). METHODS: A retrospective chart review was performed to identify patients with isolated PFOA who were either managed non-operatively or surgically with a TTO and who had a minimum follow-up of 2 years. Patients were surveyed with the visual analog scale (VAS) for pain, Knee Injury and Osteoarthritis Outcome Score for Joint Replacement (KOOS-JR), Anterior Knee Pain scale (Kujala), and Tegner Activity scale. Statistical analysis included two-sample t-testing, one-way ANOVA, and bivariate analysis. RESULTS: The clinical outcomes of 49 non-operatively managed patients (mean age: 52.7 ± 11.3 years; mean follow-up: 1.7 ± 1.0 years) and 35 operatively managed patients (mean age: 31.8 ± 9.4 years; mean follow-up: 3.5 ± 1.7 years) were assessed. The mean VAS improved sig-nificantly in both groups [6.12 to 4.22 (non-operative), p < 0.0001; 6.94 to 2.45 (TTO); p < 0.0001], with operatively treated patients having significantly lower postoperative pain than non-operatively managed patients at the time of final follow-up [2.45 (TTO) vs. 4.22 (non-operative), p < 0.001]. The mean KOOS-JR score was significantly greater in the operative group at time of final follow-up [78.7 ± 11.6 (TTO) vs. 71.7 ± 17.8 (non-operative), p = 0.035]. There was no significant difference in Kujala or Tegner scores between the treatment groups. Additionally, there was no sig-nificant relationship between the number of intra-articular injections, duration of NSAID use, and number of physical therapy sessions on clinical outcomes in the non-operatively treated group (p > 0.05). CONCLUSIONS: An unloading anteromedialization TTO provides significantly better pain relief and restoration of function compared to non-operative management in the treatment of symptomatic PFOA.

Impaired bone mineral density and microarchitecture in female adolescents with IgE-mediated cow's milk allergy.

This study compared the bone parameters of adolescents with persistent cow's milk allergy (CMA) with those of healthy adolescents. Adolescents with CMA had compromised bone parameters (lower bone mineral density, impaired trabecular microarchitecture, and lower bone strength). Partial exclusion diet was associated with better bone parameters than total exclusion diet. BACKGROUND: Persistent immunoglobulin E (IgE)-mediated cow's milk allergy (CMA) may impair bone parameters and increase the risk of fractures. High-resolution peripheral quantitative computed tomography (HR-pQCT) is a novel methodology that not only assesses trabecular and cortical bone compartments and volumetric density measurements, but also evaluates bone microarchitecture and estimates biomechanical properties through finite element analysis (FEA). Both HR-pQCT and bone strength parameters derived from FEA have shown a strong correlation with fracture risk. PURPOSE: To assess the bone density, microarchitecture, and bone strength of adolescents with persistent IgE-mediated CMA (IgE-CMA). METHODS: This was an observational, cross-sectional study with female adolescents with persistent IgE-CMA and healthy control participants matched by female sex and sexual maturation. Bone parameters were assessed by areal bone mineral density (aBMD) through dual-energy X-ray absorptiometry (DXA), bone microarchitecture by HR-pQCT at the radius and tibia, and laboratory markers related to bone metabolism. RESULTS: The median age of adolescents with persistent IgE-CMA (n = 26) was 13.0 years (interquartile range (IQR) 11.4-14.7) and of healthy control participants (n = 28) was 13.6 years (IQR 11.9-14.9). Adolescents with IgE-CMA ingested 27.4% less calcium (p = 0.012) and 28.8% less phosphorus (p = 0.009) than controls. Adolescents with IgE-CMA had lower bone mineral content (BMC) (38.83 g vs. 44.50 g) and aBMD (0.796 g/cm2 vs. 0.872 g/cm2) at lumbar spine, and lower BMC (1.11 kg vs. 1.27 kg) and aBMD (0.823 g/cm2 vs. 0.877 g/cm2) at total body less head (TBLH) (p < 0.05). However, Z-scores BMC and Z-scores aBMD at lumbar spine and TBLH, when adjusted for Z-score height/age, were not significantly different between the groups. Moreover, CMA adolescents had lower bone strength at the distal tibia (S 169 kN/mm vs. 194 kN/mm; F Load 8030 N vs. 9223 N) (p < 0.05). Pairing of groups by the presence of menarche showed compromised parameters at the tibia-lower total volumetric BMD (Tt.vBMD) (293.9 mg HA/cm3 vs. 325.9 mg HA/cm3) and trabecular vBMD (Tb.vBMD) (170.8 mg HA/cm3 vs. 192.2 mg HA/cm3), along with lower cortical thickness (Ct.th) (1.02 mm vs. 1.16 mm) and bone strength (S 174 kN vs. 210 kN; F Load 8301 N vs. 9950 N)-and at the radius (S 61 kN/mm vs. 71 kN/mm; F Load 2920 N vs. 3398 N) (p < 0.05) among adolescents with IgE-CMA. Adolescents with IgE-CMA on a total exclusion diet (n = 12) showed greater impairment of bone features than those on a partial exclusion diet (n = 14), with lower lumbar spine Z-score BMC (- 0.65 vs. 0.18; p = 0.013), lumbar spine trabecular bone score (TBS) (1.268 vs. 1.383; p = 0.005), Z-score TBS (0.03 vs. 1.14; p = 0.020), TBLH Z-score BMC (- 1.17 vs. - 0.35; p = 0.012), TBLH Z-score aBMD (- 1.13 vs. - 0.33; p = 0.027), Tt.vBMD at the tibia (259.0 mg HA/cm3 vs. 298.7 mg HA/cm3; p = 0.021), Ct.th at the tibia (0.77 mm vs. 1.04 mm; p = 0.015) and Ct.th at the radius (0.16 mm vs. 0.56 mm; p = 0.033). CONCLUSION: Adolescents with persistent IgE-CMA had lower aBMD and compromised microarchitecture (impaired trabecular microarchitecture and lower bone strength). Adolescents on a partial exclusion diet had better bone parameters than those on a total exclusion diet.

Influence of hamstring stiffness on anterior tibial translation after anterior cruciate ligament rupture.

BACKGROUND: There is a correlation between the hamstring stiffness and the decrease of anterior tibial translation in athletic patients with healthy knees. This observation could question the clinical reliability of the Lachman-Trillat test to detect complete ACL ruptures in patients with an important hamstring stiffness. This study aims to determine if anterior tibial translation is correlated with hamstring stiffness in patients with complete ACL rupture. METHODS: This is a prospective study including patients with unilateral complete ACL rupture confirmed by MRI. The arthrometer GNRB® was used to measure anterior tibial translation on both knees at 134 N and compute the side-to-side difference. The hamstring stiffness was assessed with the eccentric peak torque using the isokinetic dynamometer CON-TREX. Linear regressions were done between these two parameters on two study groups: one included all patients (GR1), and the other included only isolated ACL injuries without associated lesions (GR2). RESULTS: Fifty-two patients were included (29 men, 23 women) with an average of 34.9 years old. The mean eccentric peak torque of the hamstrings for pathological knees was 94.9Nm for GR1 and 91.7Nm for GR2. The mean side-to-side difference was 2.42 mm for GR1 and 1.99 mm for GR2. No significant correlations were identified for GR1 (p = 0.66) and GR2 (p = 0.105). CONCLUSION: No significant linear correlation was found between side-to-side difference measured by GNRB® and hamstring stiffness for pathological knees with complete ACL rupture. These results lead to believe that the Lachman-Trillat clinical test is not influenced by hamstring stiffness. LEVEL OF EVIDENCE: Prospective study, level of evidence IV.

A novel technique to assess rotational deformities in lower extremities using CT-based motion analysis.

Rotational deformities following intramedullary (IM) nailing of tibia has a reported incidence of as high as 20%. Common techniques to measure deformities following IM nailing of tibia are either based on clinical assessment, plain X-rays or Computed Tomography (CT) comparing the treated leg with the uninjured contralateral side. All these techniques are based on examiners manual calculation inherently subject to bias. Following our previous rigorous motion analysis and symmetry studies on hemi pelvises, femurs and orthopaedic implants, we aimed to introduce a novel fully digital technique to measure rotational deformities in the lower legs. Following formal institutional approval from the Imperial College, CT images of 10 pairs of human lower legs were retrieved. Images were anonymized and uploaded to a research server. Three dimensional CT images of the lower legs were bilaterally reconstructed. CT-based motion analysis (CTMA) was used and the mirrored images of the left side were merged with the right side proximally as stationary and distally as moving objects. Discrepancies in translation and rotation were automatically calculated. Our study population had a mean age of 54 ± 20 years. There were six males and four females. We observed a greater variation in translation (mm) of Centre of Mass (COM) in sagittal plane (95% CI - 2.959-.292) which was also presented as rotational difference alongside the antero-posterior direction or Y axis (95% CI .370-1.035). In other word the right lower legs in our study were more likely to be in varus compared to the left side. However, there were no statistically significant differences in coronal or axial planes. Using our proposed fully digital technique we found that lower legs of the human adults were symmetrical in axial and coronal plane. We found sagittal plane differences which need further addressing in future using bigger sample size. Our novel recommended technique is fully digital and commercially available. This new technique can be useful in clinical practice addressing rotational deformities following orthopaedic surgical intervention. This new technique can substitute the previously introduced techniques.

Do Metaphyseal Cones and Stems Provide Any Biomechanical Advantage for Moderate Contained Tibial Defects in Revision TKA? A Finite-Element Analysis Based on a Cadaver Model.

BACKGROUND: Satisfactory management of bone defects is important to achieve an adequate reconstruction in revision TKA. Metaphyseal cones to address such defects in the proximal tibia are increasingly being used; however, the biomechanical superiority of cones over traditional techniques like fully cementing the implant into the defect has not yet been demonstrated. Moreover, although long stems are often used to bypass the defects, the biomechanical efficacy of long stems compared with short, cemented stems when combined with metaphyseal cones remains unclear. QUESTIONS/PURPOSES: We developed and validated finite-element models of nine cadaveric specimens to determine: (1) whether using cones for addressing moderate metaphyseal tibial defects in revision TKA reduces the risk of implant-cement debonding compared with cementing the implant alone, and (2) when using metaphyseal cones, whether long, uncemented stems (or diaphyseal-engaging stems) reduce the risk of implant-cement debonding and the cone-bone micromotions compared with short, cemented stems. METHODS: We divided nine cadaveric specimens (six male, three female, aged 57 to 73 years, BMI 24 to 47 kg/m2) with standardized tibial metaphyseal defects into three study groups: no cone with short (50-mm) cemented stem, in which the defect was filled with cement; cone with short (50-mm) cemented stem, in which a metaphyseal cone was implanted before cementing the implant; and cone with long, diaphyseal-engaging stem, which received a metaphyseal cone and the largest 150-mm stem that could fit the diaphyseal canal. The specimens were implanted and mechanically tested. Then, we developed and validated finite-element models to investigate the interaction between the implant and the bone during the demanding activity of stair ascent. We quantified the risk of implant debonding from the cement mantle by comparing the axial and shear stress at the cement-implant interface against an experimentally derived interface failure index criterion that has been previously used to quantify the risk of cement debonding. We considered the risk of debonding to be minimal when the failure index was below 10% of the strength of the interface (or failure index < 0.1). We also quantified the micromotion between the cone and the bone, as a guide to the likelihood of fixation by bone ingrowth. To this end, we assumed bone ingrowth for micromotion values below the most restrictive reported threshold for bone ingrowth, 20 µm. RESULTS: When using a short, 50-mm cemented stem and cement alone to fill the defect, 77% to 86% of the cement-implant interface had minimal risk of debonding (failure index < 0.1). When using a short, 50-mm cemented stem with a cone, 87% to 93% of the cement-implant interface had minimal debonding risk. When combining a cone with a long (150-mm) uncemented stem, 92% to 94% of the cement-implant interface had minimal debonding risk. The differences in cone-bone micromotion between short, cemented stems and long, uncemented stems were minimal and, for both configurations, most cones had micromotions below the most restrictive 20-µm threshold for ingrowth. However, the maximum micromotion between the cone and the bone was in general smaller when using a long, uncemented stem (13-23 µm) than when using a short, cemented stem (11-31 µm). CONCLUSION: Although the risk of debonding was low in all cases, metaphyseal cones help reduce the biomechanical burden on the implant-cement interface of short-stemmed implants in high-demand activities such as stair ascent. When using cones in revision TKA, long, diaphyseal-engaging stems did not provide a clear biomechanical advantage over short stems. Future studies should explore additional loading conditions, quantify the interspecimen variability, consider more critical defects, and evaluate the behavior of the reconstructive techniques under repetitive loads. CLINICAL RELEVANCE: Cones and stems are routinely used to address tibial defects in revision TKA. Despite our finding that metaphyseal cones may help reduce the risk of implant-cement debonding and allow using shorter stems with comparable biomechanical behavior to longer stems, either cones or cement alone can provide comparable results in contained metaphyseal defects. However, longer term clinical studies are needed to compare these techniques over time.

Knee joint loadings are related to tibial torsional alignments in people with radiographic medial knee osteoarthritis.

Torsional malalignment was detected in subjects with medial knee osteoarthritis (KOA) but few studies have reported the effect of torsional deformity on knee joint loads during walking. Therefore, this study examined the relationships between lower limb torsional alignments and knee joint loads during gait in people with symptomatic medial KOA using cross-sectional study design. Lower limb alignments including tibial torsion, tibiofemoral rotation and varus/valgus alignments in standing were measured by EOS low-dose bi-planar x-ray system in 47 subjects with mild or moderate KOA. The external knee adduction moment (KAM), flexion moment (KFM) and the KAM index which was defined as (KAM/ (KAM+KFM)*100) during walking were analyzed using a motion analysis system so as to estimate the knee loads. Results revealed externaltibial torsion was positively associated with KAM in subjects with moderate KOA (r = 0.59, p = 0.02) but not in subjects with mild KOA. On the contrary, significant association was found between knee varus/valgus alignment and KAM in the mild KOA group (r = 0.58, p<0.001) and a sign of association in the moderate KOA group (r = 0.47, p = 0.08). We concluded tibial torsion and knee varus/valgus mal-alignments would be associated with joint loading in subjects with moderate medial KOA during walking. Radiographic severity might need to be considered when using gait modification as a rehabilitation strategy for this condition.

The effect of aqueous extract of Prunus dulcis on tibial bone healing in the rabbit.

BACKGROUND: Bone fractures are medical emergencies that require prompt intervention to help return bone to its normal function. Various methods and treatments have been utilized to increase the speed and efficiency of bone repair. This study aimed to investigate the treatment effects of Prunus dulcis aqueous extract on tibial bone healing in rabbits. METHODS: All animals were distributed in five groups with six rats in each group, including the sham group, the control group in which tibial lesion was made and received distilled water, treatment groups with 150 mg kg-1, 300 mg kg-1 doses of Prunus dulcis extract, and osteocare treated group. Biochemical blood factors including calcium, phosphorus, and alkaline phosphatase (on days 0, 10, 30, and 50), biomarkers of oxidative stress such as GPx, CAT, and MDA (on days 10 and 30), radiological evaluation, histopathological parameters, and osteocalcin immunohistochemical expression were assessed. RESULTS: The data showed calcium levels in the treatment groups increased significantly from day 10 to day 50, respectively, and blood phosphorus levels decreased from day 10 to day 50 in the treatment groups. Alkaline phosphatase initially increased and then decreased in treatment groups. In the treatment groups, GPx and CAT levels significantly increased, and the serum amount of MDA reduced. The best antioxidant results were related to the extract-treated group with a higher dose. Radiographic score was significantly higher in the treatment groups than the control group on day 30. Based on the pathological findings, the healing occurred faster in the extract-treated group with a higher dose. Osteocalcin expression was significantly higher in the control group than that in the treatment groups. CONCLUSIONS: Treatment with Prunus dulcis extract with a dosage of 300 mg/kg accelerated tibial bone healing in rabbits.

Problemas rotacionales de las extremidades inferiores en niños y adolescentes / Rotational problems of lower limbs in children and adolescents

Las deformidades torsionales de las extremidades inferiores corresponden a una de las causas de visita más frecuente al ortopedista infantil. En la mayoría de los casos, estas consultas son innecesarias, pues se trata de condiciones normales del esqueleto en desarrollo, que suelen corregir espontáneamente. El médico no especialista debe estar familiarizado con los cambios fisiológicos que ocurren en las extremidades inferiores del niño, de manera de identificar aquellos casos severos o aquellos que producen alteraciones funcionales.Estas deformidades, pueden ocurrir en cualquier nivel, desde la pelvis a los pies, por lo que un examen físico sistemático permitirá identificar la causa y proponer un tratamiento de acuerdo a los hallazgos. El único tratamiento eficaz, cuando la situación lo requiere, es la cirugía ortopédica. El uso de plantillas, calzado ortopédico y órtesis no cumplen ninguna función en el manejo de estas alteraciones

Torsional deformities of lower limbs are one of the most frequent causes to visit a pediatric orthopedic surgeon. In most cases, these are unnecessary, as they represent a normal stage of the developing skeleton, which usually correct spontaneously. The nonspecialist physician must be familiar with the physiological changes that occur in children's lower limb, in order to identify those cases that are severe, or cause functional disabilities.These deformities can occur at any level, from the pelvis to the feet, so a systematic physical examination will allow the cause to be identified and treated to be proposed according on to the findings. The only effective treatment, when the situation requires it, is orthopedic surgery. The use of insoles, orthopedic footwear, and orthoses have no role in the management of these alterations

Malrotation of Long Bones.

Rotational malreduction is a common yet underreported postoperative complication following intramedullary nailing of long bone fractures. In most situations, this can be prevented at the time of initial surgery with meticulous preoperative planning, careful use of intraoperative fluoroscopy, and awareness of risk factors for malrotation. However, rotational alignment remains difficult to assess by clinical examination so a high index of suspicion is always necessary. Here, the authors review the literature on this complication and report on 3 such cases of femoral and the tibial malrotation, methods for calculating femoral version and tibial torsion, and techniques for correcting these deformities.

No difference in long-term outcomes between men and women undergoing medial fixed-bearing cemented unicompartmental knee arthroplasty: A retrospective cohort study with minimum 10-year follow up.

BACKGROUND: Some studies have suggested that women have poorer short-term outcomes after unicompartmental knee arthroplasty (UKA) due to a higher incidence of implant overhang. This study aimed to compare patient-reported outcome measures (PROMs) between men and women after UKA at a minimum follow-up of 10 years. METHODS: Patients who underwent medial fixed-bearing UKA by two arthroplasty surgeons were identified from an institutional joint registry. Men and women were matched for age, body mass index, Charlson Comorbidity Index, American Society of Anesthesiologists class, range-of-motion and baseline PROMs using propensity scores. PROMs were compared at 2 and 10 years. Patients also completed a satisfaction questionnaire during these visits. Radiographic outliers were defined as > 2 mm of overhang. RESULTS: A total of 128 patients were included. There was no difference in complications, length of stay or readmissions. Women had poorer Knee Society functional scores, Short-Form 36 physical and mental component scores (SF-36 MCS) at 2 years. No difference in PROMs was found at 10 years, except for poorer SF-36 MCS in women (P = 0.041). At 10 years, 96% of women and 92% of men were satisfied (P = 0.243). Fifteen-year survivorship free from any revision was 96% in each group. There were more medial-tibial outliers in women (9%) compared with men (5%) (P = 0.018). However, no association between outliers and outcomes or survivorship was found on multivariate analyses. CONCLUSION: There was nodifference in clinical outcomes between men and women undergoing UKA at a minimum follow-up of 10 years. While women had a higher incidence of medial tibial overhang, this was not associated with long-term outcomes or survivorship.

Application of the multiplanar fracture redactor in the treatment of tibial shaft fractures with intramedullary nails.

This prospective study aimed to introduce the application of the multiplanar fracture redactor (MFR) in the treatment of tibial shaft fractures with intramedullary nails (IMNs). From February to June 2018, a total of 18 patients with tibial shaft fractures were recruited. MFR was used to help achieve the reduction of tibial shaft fractures with IMN in all patients. The demographic and fracture characteristics, surgical data, postoperative complications and prognostic indicators of 16 patients were recorded. All operations were performed under closed reduction, excellent radiological and functional outcomes were observed. The average duration of surgery, intraoperative blood loss, intraoperative fluoroscopy times, number of intraoperative assistants, and duration of postoperative hospital stay were 91.2 ± 26.1 min, 95.0 ± 58.3 ml, 19.2 ± 2.3 times, 1 (1-2), and 7.8 ± 2.6 days, respectively. The mean Lysholm Knee Function Score (LKFS), American Orthopaedic Foot and Ankle Society (AOFAS) and visual analogue scale (VAS) scores at one year after surgery were 96.8 ± 2.1, 94.8 ± 2.9, and 1 (0-3), respectively. Wound infection, non-union, malunion or complications associated with MFR were not observed in this study. Thus, MFR was a safe and neater method to achieve and maintain the reduction of tibial shaft fractures with IMN.

Different anterolateral procedures have variable impact on knee kinematics and stability when performed in combination with anterior cruciate ligament reconstruction.

OBJECTIVE: The optimal anterolateral procedure to control anterolateral rotational laxity of the knee is still unknown. The objective was to compare the ability of five anterolateral procedures performed in combination with anterior cruciate ligament reconstruction (ACLR) to restore native knee kinematics in the setting of a deficient anterior cruciate ligament (ACL) and anterolateral structures. METHODS: A controlled laboratory study was performed using 10 fresh-frozen cadaveric whole lower limbs with intact iliotibial band. Kinematics from 0° to 90° of flexion were recorded using a motion analysis three-dimensional (3D) optoelectronic system, allowing assessment of internal rotation (IR) and anteroposterior (AP) tibial translation at 30° and 90° of flexion. Joint centres and bony landmarks were calculated from 3D bone models obtained from CT scans. Intact knee kinematics were assessed initially, followed by sequential section of the ACL and anterolateral structures (anterolateral ligament, anterolateral capsule and Kaplan fibres). After ACLR, five anterolateral procedures were performed consecutively on the same knee: ALLR, modified Ellison, deep Lemaire, superficial Lemaire and modified MacIntosh. The last three procedures were randomised. For each procedure, the graft was fixed in neutral rotation at 30° of flexion and with a tension of 20 N. RESULTS: Isolated ACLR did not restore normal overall knee kinematics in a combined ACL plus anterolateral-deficient knee, leaving a residual tibial rotational laxity (p=0.034). Only the ALLR (p=0.661) and modified Ellison procedure (p=0.641) restored overall IR kinematics to the normal intact state. Superficial and deep Lemaire and modified MacIntosh tenodeses overconstrained IR, leading to shifted and different kinematics compared with the intact condition (p=0.004, p=0.001 and p=0.045, respectively). Compared with ACLR state, addition of an anterolateral procedure did not induce any additional control on AP translation at 30° and 90° of flexion (all p>0.05), except for the superficial Lemaire procedure at 90° (p=0.032). CONCLUSION: In biomechanical in vitro setting, a comparison of five anterolateral procedures revealed that addition of either ALLR or modified Ellison procedure restored overall native knee kinematics in a combined ACL plus anterolateral-deficient knee. Superficial and deep Lemaire and modified MacIntosh tenodeses achieved excellent rotational control but overconstrained IR, leading to a change from intact knee kinematics. LEVEL OF EVIDENCE: The level-of-evidence statement does not apply for this laboratory experiments study.

Medialization of the mechanical axis of the tibia is related to lateralization of the tibial tuberosity in knee osteoarthritis.

PURPOSE: To determine whether medialization of the proximal tibia due to a varus deformity is related to lateralization of the tibial tuberosity in varus knee osteoarthritis (OA). METHODS: A total of 120 knees that underwent osteotomies around the knee for varus knee OA were enrolled. Mechanical medial proximal tibial angle (mMPTA) was measured on radiographs. The angle between the mechanical and anatomical axes of the tibia (angle MA) and the distance between the centre of the tibial plateau and the anatomical axis (distance MA) were measured in the coronal plane on computed tomography images. The tibial tuberosity-posterior cruciate ligament (TT-PCL) distance, the distance between the midpoint of the tibial tuberosity and the centre of the tibial plateau (TT-centre distance), and the angle between the line through the midpoint of the tibial tuberosity and the centre of the tibial plateau and the anteroposterior axis (TT-centre angle) were measured in the axial plane. The correlations of these parameters were evaluated. RESULTS: mMPTA correlated negatively with angle MA (r = -0.37, P < 0.01) and distance MA (r = -0.55, P < 0.01). Angle MA and distance MA correlated with TT-PCL distance (r = 0.39, P < 0.01, r = 0.42, P < 0.01), TT-centre distance (r = 0.35, P < 0.01, r = 0.38, P < 0.01) and TT-centre angle (r = 0.36, P < 0.01, r = 0.36, P < 0.01). CONCLUSIONS: Medialization of the proximal tibia due to a varus deformity may induce lateralization of the tibial tuberosity.

Three-dimensional-printed porous implant combined with autograft reconstruction for giant cell tumor in proximal tibia.

BACKGROUND: This study is to describe the design and surgical techniques of three- dimensional-printed porous implants for proximal giant cell tumors of bone and evaluate the short-term clinical outcomes. METHODS: From December 2016 to April 2020, 8 patients with giant cell tumor of bone in the proximal tibia underwent intralesional curettage of the tumor and reconstruction with bone grafting and three-dimensional-printed porous implant. Detailed anatomy data were measured, including the size of lesion and thickness of the subchondral bone. Prostheses were custom-made for each patient by our team. All patients were evaluated regularly and short-term clinical outcomes were recorded. RESULTS: The mean follow-up period was 26 months. According to the different defect sizes, the mean size of the plate and mean length of strut were 35 × 35 mm and 20 mm, respectively. The mean affected subchondral bone percentage was 31.5%. The average preoperative and postoperative thickness of the subchondral bone was 2.1 mm and 11.1 mm, respectively. There was no wound infection, skin necrosis, peroneal nerve injury, or other surgical related complications. No degeneration of the knee joint was found. Osseointegration was observed in all patients. The MSTS improved from an average of 12 preoperatively to 28 postoperatively. CONCLUSION: The application of three-dimensional-printed printed porous prosthesis combined autograft could supply enough mechanical support and enhance bone ingrowth. The design and operation management lead to satisfactory subchondral bone reconstruction.

Development of a tibial experimental non-union model in rats.

BACKGROUND: Many non-union animal models have been developed to explore the problems surrounding fracture healing. However, the existing models are not perfect and cannot satisfy all non-union studies. This study aimed to make a non-union model of the tibia in rats by cauterization of the posterior of 2 mm on both sides of the fracture end after open osteotomy of the tibia and fixing the fractured tibia with a Kirschner wire 0.8 mm in diameter. METHODS: For this study, 96 female adult Sprague-Dawley (SD) rats were used. The rats underwent surgery to produce a tibial open fracture and were fixed with a 0.8-mm diameter Kirschner wire. In 48 of the rats, the periosteum proximal and distal to the fracture end was cauterized. RESULTS: At 2, 4, 6, and 8 weeks after surgery, radiological and histological analysis showed typical physiological healing in the control group, and the healing rate was 100% at 6 weeks. But the non-union group was characterized by resorption of the fracture ends with few callus formations and no bridging callus formation, and the healing rate was 0% at 8 weeks. CONCLUSIONS: This method represents a reproducible model to create atrophic non-unions. This model provides a new option for studying the basic healing mechanisms and evaluating new therapies for bone regeneration and treatment of non-unions.

Coronal and axial alignment relationship in Caucasian patients with osteoarthritis of the knee.

Individualized pre-operative assessment of the patterns of the lower extremity anatomy and deformities in patients undergoing total knee arthroplasty seems essential for a successful surgery. In the present study, we investigated the relationship among the coronal alignment and the rotational profile of the lower extremities in the Caucasian population with end-stage knee osteoarthritis. We conducted a prospective study of 385 knees that underwent a pre-operative three-dimensional computed tomography-based model. The lower extremity alignment was determined (mechanical tibiofemoral or hip-knee-ankle angle, supplementary angle of the femoral lateral distal angle, and proximal medial tibial angle). For each case, the femoral distal rotation (condylar twist angle), the femoral proximal version, and the tibial torsion were determined. As the coronal alignment changed from varus to valgus, the femoral external rotation increased (r = 0.217; p < 0.0005). As the coronal alignment changed from varus to valgus, the external tibial torsion increased (r = 0.248; p < 0.0005). No correlation was found between the global coronal alignment and the femoral version. The present study demonstrates a linear relationship between the coronal alignment and the rotational geometry of the distal femur. This correlation also occurs with the tibial torsion. Perhaps outcomes of total knee arthroplasty surgery might be improved by addressing these deformities as well.

Total Knee Arthroplasty with Intra-Articular Resection of Bone for Knee Arthritis Secondary to Malunion of a Tibial Shaft Fracture: A Radiological Evaluation of Correction of the Tibial Deformity.

This retrospective study was aimed to evaluate the clinical outcome and the extent of correction of the tibial deformity by a radiological evaluation following total knee arthroplasty (TKA) combined with intra-articular bone resection, in patients with knee arthritis and ipsilateral malunited tibial fractures. Fifteen patients (15 knees) with severe arthritis of the knee and extra-articular malunion of the tibia were treated using TKA with intra-articular bone resection. The extra-articular deformities in the coronal plane were 10 tibia vara (mean 15°, range 9°-30°), 4 tibia valgum (mean 12°, range 6°-20°), and one double deformity in the tibial shaft. The follow-up duration was 84 months (24-240). At the last follow-up, the mean Knee Society knee and function scores had improved, respectively (p = 0.001). The mean arc of knee motion improved from 97° preoperatively to 118.3° at the last follow-up (p < 0.001). The mean mechanical axis improved from a preoperative 15.5° to 1.5° of varus (p = 0.013). Excluding the patient with a double tibial malunion, in the 10 patients with varus tibial angulations, the tibia vara had improved from 15° preoperatively to 2.6° (p = 0.005). There were no observed complications except for one with a postoperative deep infection. In conclusion, our results indicated that TKA with intra-articular resection of the bone is an effective procedure for the treatment of severe arthritis of the knee with extra-articular malunion of the tibia in the coronal plane (≤30° of varus; ≤20° of valgus).

Octanoic acid a major component of widely consumed medium-chain triglyceride ketogenic diet is detrimental to bone.

Octanoic acid is a medium-chained saturated fatty acid found abundantly in the ketogenic dietary supplements containing medium chained triglycerides (MCT) along with decanoic acid. The MCT ketogenic diet is commonly consumed for weight loss but has also showcased neuroprotective potential against neurodegenerative disorders. However, recent clinical findings have reported a critical disadvantage with the long-term consumption of ketogenic diet i.e. bone loss. The following study was employed to investigate whether the two major components of MCT diet also possess bone loss potential as observed with classical ketogenic diet. Swiss albino mice aged between 10 and 12 weeks, were divided into 3 treatment groups that were administered with oral suspensions of octanoic acid, decanoic acid and a combination of both for 4 weeks. Bone specific markers, microarchitectural parameters, using micro computed tomography, and biomechanical strength were analyzed. Remarkably deleterious alterations in the trabecular bone microarchitecture, and on bone markers were observed in the octanoic acid treated groups. Our results suggest significant negative effects on bone health by octanoic acid. These findings require further investigation and validation in order to provide significant clinically relevant data to possibly modify dietary composition of the MCT ketogenic diet.

Tibial cutting guide (resector) holding pins position and subsequent risks of periprosthetic fracture in unicompartmental knee arthroplasty: a finite element analysis study.

BACKGROUND: Periprosthetic fracture of the tibia after unicompartmental knee arthroplasty has been reported to be associated with excessive pin holes created for stabilization of the cutting guide. However, fractures have also been reported in cases using two pins as in the method suggested by the manufacturer. It is currently unclear whether variations in pinhole positions make a difference in proximal tibial fracture risk. METHODS: Finite element models were constructed using Chinese female bone computed tomography images, with bone cuts made according to the surgical steps of implanting a fixed bearing unicompartmental arthroplasty. Four combinations of pinholes (pins placed more closely to the medial tibial cortex or centrally along the mechanical axis as allowed by the tibial cutting guide) created for tibial cutting guide placement were tested by finite element analyses. Testing loads were applied for simulating standing postures. The maximum von Mises stress on the tibial plateau was evaluated. RESULTS: Pinhole placed close to the medial edge of the proximal tibial plateau is associated with the highest stress (27.67 Mpa) and is more likely to result in medial tibial fracture. On the contrary, pinhole placed along the central axis near the tibial tuberosity has the lowest stress (1.71 Mpa) and reflects lower risk of fracture. CONCLUSION: The present study revealed that placing tibial cutting guide holding pins centrally would lower the risks of periprosthetic fracture of the medial tibial plateau by analyzing the associated stress in various pin hole positions using finite element analysis.