Quantification of Veterinary Antibiotics in Pig and Poultry Feces and Liquid Manure as a Non-Invasive Method to Monitor Antibiotic Usage in Livestock by Liquid Chromatography Mass-Spectrometry.

Antibiotics are active substances frequently used to treat and prevent diseases in animal husbandry, especially in swine and poultry farms. The use of manure as a fertilizer may lead to the dispersion of antibiotic residue into the environment and consequently the development of antibiotic-resistant bacteria. Most pharmaceutical active ingredients are excreted after administration, in some cases up to 90% of the consumed dose can be found in the feces and/or urine as parent compound. Therefore, due to antibiotic metabolism their residues can be easily detected in manure. This article describes a method for simultaneous analysis of ciprofloxacin, chlortetracycline, doxycycline, enrofloxacin, lincomycin, oxytetracycline, tetracycline, tiamulin, trimethoprim and tylosin in feces, liquid manure and digestate. Antibiotics were extracted from the different matrices with McIlvaine-Na2EDTA buffer solution and the extract was purified by the use two techniques: d-SPE and SPE (Strata-X-CW cartridges) and final eluent was analyzed by LC-MS and LC-MS/MS. The European Commission Decision 2002/657/EC was followed to conduct the validation of the method. Recoveries obtained from spiked pig and poultry feces and liquid manures samples ranged from 63% to 93% depending on analytes. The analysis of 70 samples (feces, liquid manure and digestate) revealed that 18 samples were positive for the presence of doxycycline, oxytetracycline, tetracycline, chlortetracycline, enrofloxacin, tiamulin and lincomycin. The results obtained in the presented study demonstrated that animal feces can be used as a non-invasive method detection antibiotic usage in animal production.

Competitive adsorption of tylosin, sulfamethoxazole and Cu(II) on nano-hydroxyapatitemodified biochar in water.

Antibiotics and heavy metals are frequently detected simultaneously in water environment. In this study, the competitive adsorption behavior of tylosin (TYL) and sulfamethoxazole (SMX) on nano-hydroxyapatite modified biochar (nHAP@biochar) in accordance with Cu(II) in single, binary and ternary systems was investigated. The specific surface area of nHAP@biochar was 566.056 m2/g. The adsorption of TYL on nHAP@biochar reduced by 13.36%-41.04% or 9.92%-38.69% with Cu(II) and SMX in the solution, respectively. The suppression of SMX was stronger than Cu(II) on the adsorption of TYL when the SMX or Cu(II) was constant. The adsorption of SMX increased by 2.01-3.56 times in the present of Cu(II), while suppressed by TYL up to 42.30%. Due to the bridging of TYL or SMX between the nHAP@biochar and Cu(II) and destroying of bound water surrounded, the adsorption of Cu(II) increased to a greater extent. Electrostatic interaction and H-bond were the two main interactions between TYL, SMX and Cu(II) and nHAP@biochar. π-π interactions was also interaction between the SMX and nHAP@biochar.

Iron and manganese oxides modified maize straw to remove tylosin from aqueous solutions.

Maize straw modified by iron and manganese oxides was synthesized via a simple and environmentally friendly method. Three maize straw materials, the original maize straw, maize straw modified by manganese oxides and maize straw modified by iron and manganese oxides, were detected by SEM, BET, XPS, XRD and FTIR. The results showed that maize straw was successfully modified and maize straw modified by iron and manganese oxides has a larger surface area than MS. According to the experimental data, the sorption trend could conform to the pseudo-second-order kinetic model well, and the sorption ability of tylosin on sorbents followed the order of original maize straw < maize straw modified by manganese oxides < maize straw modified by iron and manganese oxides. The study indicated that manganese oxides and iron-manganese oxides could significantly enhance the sorption capacity of original maize straw. The sorption isotherm data of tylosin on original maize straw fit a linear model well, while Freundlich models were more suitable for maize straw modified by manganese oxides and maize straw modified by iron and manganese oxides. The pH, ionic strength and temperature can affect the sorption process. The sorption mechanisms of tylosin on iron and manganese oxides modified maize straw were attribute to the surface complexes, electrostatic interactions, H bonding and hydrophobic interactions.

Development and validation of a simple solid-phase extraction method coupled with liquid chromatography-triple quadrupole tandem mass spectrometry for simultaneous determination of lincomycin, tylosin A and tylosin B in royal jelly.

We have developed an analytical method for the determination of lincomycin, tylosin A and tylosin B residues in royal jelly using liquid chromatography-triple quadrupole tandem mass spectrometry analysis. For extraction and purification, we employed 1% trifluoroacetic acid and 0.1 m Na2 EDTA solutions along with an Oasis HLB cartridge. The target antibiotics were well separated in a Kinetex EVO C18 reversed-phase analytical column using a combination of 0.1% formate acid in ultrapure water (A) and acetonitrile (B) as the mobile phase. Good linearity was achieved over the tested concentration range (5-50 µg/kg) in matrix-matched standard calibration. The coefficients of determination (R2 ) were 0.9933, 0.9933 and 0.996, for tylosin A, tylosin B and lincomycin, respectively. Fortified royal jelly spiked with three different concentrations of the tested antibiotics (5, 10 and 20 µg/kg) yielded recoveries in the range 80.94-109.26% with relative standard deviations ≤4%. The proposed method was applied to monitor 11 brand of royal jelly collected from domestic markets and an imported brand from New Zealand; all the samples tested negative for lincomycin, tylosin A and tylosin B residues. In conclusion, 1% trifluoroacetic acid and 0.1 m Na2 EDTA aqueous solvents combined with solid-phase extraction could effectively complete the sample preparation process for royal jelly before analysis. The developed approach can be applied for a routine analysis of lincomycin, tylosin A and tylosin B residues in royal jelly.

Identification of novel tylosin analogues generated by a wblA disruption mutant of Streptomyces ansochromogenes.

BACKGROUND: Streptomyces, as the main source of antibiotics, has been intensively exploited for discovering new drug candidates to combat the evolving pathogens. Disruption of wblA, an actinobacteria-specific gene controlling major developmental transition, can cause the alteration of phenotype and morphology in many species of Streptomyces. One wblA homologue was found in Streptomyces ansochromogenes 7100 by using the Basic Local Alignment Search Tool. It is interesting to identify whether novel secondary metabolites could be produced by the wblA disruption mutant as evidenced in other Streptomyces. RESULTS: The wblA disruption mutant of S. ansochromogenes 7100 (ΔwblA) was constructed by homologous recombination. ΔwblA failed to produce spores and nikkomycin, the major product of S. ansochromogenes 7100 (wild-type strain) during fermentation. Antibacterial activity against Staphylococcus aureus and Bacillus cereus was observed with fermentation broth of ΔwblA but not with that of the wild-type strain. To identify the antibacterial compounds, the two compounds (compound 1 and compound 2) produced by ΔwblA were characterized as 16-membered macrolides by mass spectrometry and nuclear magnetic resonance spectroscopy. The chemical structure of these compounds shows similarity with tylosin, and the bioassays indicated that the two compounds inhibited the growth of a number of gram-positive bacteria. It is intriguing that they displayed much higher activity than tylosin against Streptococcus pneumoniae. CONCLUSIONS: Two novel tylosin analogues (compound 1 and 2) were generated by ΔwblA. Bioassays showed that compound 1 and 2 displayed much higher activity than tylosin against Streptococcus pneumoniae, implying that these two compounds might be used to widen the application of tylosin.

Application of hollow fiber membrane mediated with titanium dioxide nanowire/reduced graphene oxide nanocomposite in preconcentration of clotrimazole and tylosin.

In this paper, TiO2 nanowires and TiO2 nanoparticles have been successfully anchored on graphene oxide (GO) nanosheets by a facile one-step hydrothermal method. The synthesized TiO2 NWs/RGO and TiO2 NPs/RGO nanocomposites were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. After comparatively studying of the as-made nanocomposites, TiO2 NWs/RGO nanocomposite showed the best adsorbing performance and applied as an attractive efficient sorbent reinforced with microporous hollow fiber membrane through the sol-gel technology. In the following, the selected nanocomposite was utilized for simultaneous preconcentration and determination of clotrimazole and tylosin using high performance liquid chromatography (HPLC)-UV detection, respectively. In order to optimize the extraction conditions through affecting parameters (pH, stirring rate, salt addition, extraction time and volume of donor phase), response surface methodology (RSM) was employed as a powerful statistical technique. Under the optimal conditions, the limit of detection (S/N=3) of proposed HFSPME method, was 0.67 µg L(-1) for clotrimazole and 0.91 µg L(-1) for tylosin with good linear ranges of 1.7-8000.0 µg L(-1) and 4.0-6000.0 µg L(-1). The inter-day and intra-day relative standard deviations (RSD%) at 100 µg L(-1) concentration level were in the ranges of 2.10-3.58% for clotrimazole and 3.45-7.80% for tylosin (n=5), respectively. The proposed microextraction device was extended for determination of ultra trace amounts of target analytes in milk and urine samples with satisfactory results.

Removal of a mixture tetracycline-tylosin from water based on anodic oxidation on a glassy carbon electrode coupled to activated sludge.

The purpose of this study was first to examine the electrochemical oxidation of two antibiotics, tetracycline (TC) and tylosin (Tylo), considered separately or in mixture, on a glassy carbon electrode in aqueous solutions; and then to assess the relevance of such electrochemical process as a pre-treatment prior to a biological treatment (activated sludge) for the removal of these antibiotics. The influence of the working potential and the initial concentration of TC and Tylo on the electrochemical pre-treatment process was also investigated. It was noticed that antibiotics degradation was favoured at high potential (2.4 V/ saturated calomel electrode (SCE)), achieving total degradation after 50 min for TC and 40 min for Tylo for 50 mg L(-1) initial concentration, with a higher mineralization efficiency in the case of TC. The biological oxygen demand in 5 days (BOD5)/Chemical oxygen demand (COD) ratio increased substantially, from 0.033 to 0.39 and from 0.038 to 0.50 for TC and Tylo, respectively. Regarding the mixture (TC and Tylo), the mineralization yield increased from 10.6% to 30.0% within 60 min of reaction time when the potential increased from 1.5 to 2.4 V/SCE and the BOD5/COD ratio increased substantially from 0.010 initially to 0.29 after 6 h of electrochemical pre-treatment. A biological treatment was, therefore, performed aerobically during 30 days, leading to an overall decrease of 72% of the dissolved organic carbon by means of the combined process.

Analysis of trimethoprim, lincomycin, sulfadoxin and tylosin in swine manure using laser diode thermal desorption-atmospheric pressure chemical ionization-tandem mass spectrometry.

A new extraction method coupled to a high throughput sample analysis technique was developed for the determination of four veterinary antibiotics. The analytes belong to different groups of antibiotics such as chemotherapeutics, sulfonamides, lincosamides and macrolides. Trimethoprim (TMP), sulfadoxin (SFX), lincomycin (LCM) and tylosin (TYL) were extracted from lyophilized manure using a sonication extraction. McIlvaine buffer and methanol (MeOH) were used as extraction buffers, followed by cation-exchange solid phase extraction (SPE) for clean-up. Analysis was performed by laser diode thermal desorption-atmospheric pressure chemical-ionization (LDTD-APCI) tandem mass spectrometry (MS/MS) with selected reaction monitoring (SRM) detection. The LDTD is a high throughput sample introduction method that reduces total analysis time to less than 15s per sample, compared to minutes when using traditional liquid chromatography (LC). Various SPE parameters were optimized after sample extraction: the stationary phase, the extraction solvent composition, the quantity of sample extracted and sample pH. LDTD parameters were also optimized: solvent deposition, carrier gas, laser power and corona discharge. The method limit of detection (MLD) ranged from 2.5 to 8.3 µg kg(-1) while the method limit of quantification (MLQ) ranged from 8.3 to 28µgkg(-1). Calibration curves in the manure matrix showed good linearity (R(2)≥ 0.996) for all analytes and the interday and intraday coefficients of variation were below 14%. Recoveries of analytes from manure ranged from 53% to 69%. The method was successfully applied to real manure samples.

Extraction and preconcentration of tylosin from milk samples through functionalized TiO2 nanoparticles reinforced with a hollow fiber membrane as a novel solid/liquid-phase microextraction technique.

The aim of this study was to introduce a novel, simple, and highly sensitive preparation method for determination of tylosin in different milk samples. In the so-called functionalized TiO2 hollow fiber solid/liquid-phase microextraction method, the acceptor phase is functionalized TiO2 nanoparticles that are dispersed in the organic solvent and held in the pores and lumen of a porous polypropylene hollow fiber membrane. An effective functionalization of TiO2 nanoparticles has been done in the presence of aqueous H2 O2 and a mild acidic ambient under UV irradiation. This novel extraction method showed excellent extraction efficiency and a high enrichment factor (540.2) in comparison with conventional hollow fiber liquid-phase microextraction. All the experiments were monitored at λmax = 284 nm using a simple double beam UV-visible spectrophotometer. A Taguchi orthogonal array experimental design with an OA16 (4(5) ) matrix was employed to optimize the factors affecting the efficiency of hollow fiber solid/liquid-phase microextraction such as pH, stirring rate, salt addition, extraction time, and the volume of donor phase. This developed method was successfully applied for the separation and determination of tylosin in milk samples with a linear concentration range of 0.51-7000 µg/L (r(2) = 0.991) and 0.21 µg/L as the limit of detection.

Extraction of trace tilmicosin in real water samples using ionic liquid-based aqueous two-phase systems.

The effective method of ionic liquid-based aqueous two-phase extraction, which involves ionic liquid (IL) (1-butyl-3-methyllimidazolium chloride, [C4mim]Cl) and inorganic salt (K2HPO4) coupled with high-performance liquid chromatography (HPLC), has been used to extract trace tilmicosin in real water samples which were passed through a 0.45 µm filter. The effects of the different types of salts, the concentration of K2HPO4 and of ILs, the pH value and temperature of the systems on the extraction efficiencies have all been investigated. Under the optimum conditions, the average extraction efficiency is up to 95.8%. This method was feasible when applied to the analysis of tilmicosin in real water samples within the range 0.5-40 µg mL(-1). The limit of detection was found to be 0.05 µg mL(-1). The recovery rate of tilmicosin was 92.0-99.0% from the real water samples by the proposed method. This process is suggested to have important applications for the extraction of tilmicosin.

Preparation and characterisation of in-house reference material of tylosin in honey and results of a proficiency test.

The analysis of incurred material from animals treated with pharmacologically active substances is an efficient way to check the accuracy of a method. Tylosin A was chosen for the preparation of that material because it is highly effective in controlling active infections of American Foulbrood (AFB), a global threat to apiculture, but residues in honey are not allowed according to European legislation. For this reason an in-house reference material of honey containing the macrolide tylosin A and its degradation product desmycosin (tylosin B) was prepared. After the treatment of a beehive with the appropriate macrolide tylosin A, the honey samples were collected. The incurred honey material was diluted by mixing with blank honey. Concentrations of 25.81 µg kg(-1) for tylosin A and of 19.28 µg kg(-1) for its degradation product desmycosin (tylosin B) were reached. The homogeneity was checked by analysing 12 bottles in duplicate. The stability was tested at different defined temperatures and storage conditions. The reference material described above was homogeneous and stable. Samples of this in-house reference material were used for the realisation of a proficiency test with international participation. All participants accomplished satisfying results with the exception of one laboratory.

Molecularly imprinted solid-phase extraction for determination of tilmicosin in feed using high performance liquid chromatography.

A simple, sensitive and reproducible molecularly imprinted solid-phase extraction (MISPE) coupled with high performance liquid chromatographic method was developed for monitoring tilmicosin in feeds. The polymers were prepared using tylosin as mimic template molecule, methacrylic acid as functional monomer and ethylene glycol dimethacrylate as cross-linking monomer, and chloroform as a solvent by bulk polymerization. Under the optimum MISPE conditions, the novel polymer sorbent can selectively extract and enrich tilmicosin from variety of feeds. The MISPE cartridge was better than non-imprinted, C(18) and HLB cartridges in terms of both recovery and precision. Mean recoveries of tilmicosin from five kinds of feeds spiked at 1, 10 and 50 mg kg(-1) ranged from 76.9% to 95.6%, with intra-day and inter-day relative standard deviation less than 7.6%. The linearity was ranged from 1.0 to 100 mg L(-1) for matrix standard solution (r=0.9990). The limit of detection was approximately 0.35 mg kg(-1) and the limit of quantification was approximately 0.98 mg kg(-1). There was cleaner chromatogram by using MISPE than C(18) and HLB SPE.

Microbiological screening test validation for detection of tylosin excretion in milk of cows with low and high somatic cell counts.

Antibiotic residues in milk above tolerance levels interfere with dairy product processing and pose potential health risks to consumers. Residue avoidance programmes include, among other components, the observance of withdrawal times indicated in label instructions. Persistence of antibiotics in milk following treatment is influenced by drug, dosage, route of administration, body weight and mammary gland health status. Compositional changes that take place during intramammary infection (IMI) can affect antibiotic excretion in milk, thus modifying milk withdrawal time. The objectives of this study were to validate sensitivity and specificity of a qualitative microbiological method (Charm AIM-96) to detect tylosin in bovine composite milk and to determine the influence of subclinical IMI in tylosin excretion following intramuscular administration. For test validation, two groups of approximately 120 cows were used; one received a single intramuscular injection of tylosin tartrate at a dose of 20 mg/kg, while the other group remained as untreated control. Test sensitivity and specificity were 100% and 94.1% respectively. To determine the influence of subclinical IMI in tylosin excretion, two groups of seven cows, one with somatic cell counts (SCC) < or =250 000 cells/ml and the other with SCC > or =900 000, were administered a single intramuscular injection of tylosin tartrate at a dose of 20 mg/kg. Milk samples were obtained every 12 h for 10 days following treatment. Milk tylosin excretion averaged between 5 and 9 days for cows with low and high SCC respectively (P < 0.0001). Compositional changes in cows with high SCC most likely affect the pharmacokinetic characteristics of tylosin, extending the presence of the antibiotic in milk, thus influencing milk withdrawal times.

Sample preparation strategy for the simultaneous determination of macrolide antibiotics in animal feedingstuffs by liquid chromatography with electrochemical detection (HPLC-ECD).

A novel and suitable clean-up method that allows, for the first time, the simultaneous determination of a rather large number of macrolide antibiotics (erythromycin, rosamicin, spiramycin, tylosin, kitasamycin and josamycin in feedingstuffs by high performance liquid chromatography with electrochemical detection (HPLC-ECD) is presented in this work. The effectiveness of the developed clean-up method allows the quantification of the target macrolides in poultry feed using standard calibration curves instead of matrix matched standards, which overcomes the general problem of finding representative blanks. Furthermore an additional back extraction included in the sample preparation procedure allows the determination of an additional macrolide (oleandomycin) with detection limits, expressed as apparent concentration in poultry feed, ranging from 0.04 to 0.22 mg kg(-1) and relative standard deviation values ranging from 3.6 to 10.1% depending on the target analyte. Moreover, this additional step has been proven to enlarge the scope of the method by the extension of its applicability, at the target level of concentration, to other animal feedingstuffs such as pig and cattle. The analysis of real feedingstuffs containing macrolides demonstrated the fitness for purpose of the whole analytical procedure as well as a good fitting between real and spiked samples. The proposed methods appeared therefore as a sound alternative in the frame of control (e.g. for post-screening purposes) and/or monitoring surveillance programmes at the target level of 1.0 mg kg(-1) established according to the reported lowest dosage of additive needed to lead a growth promoting effect.

Liquid chromatography-UV diode-array detection method for multi-residue determination of macrolide antibiotics in sheep's milk.

A rapid, simple and sensitive liquid chromatography-UV diode-array detection method was developed for the simultaneous determination of seven macrolides (erythromycin, oleandomycin, roxithromycin, josamycin, spiramycin, tylosin and ivermectin) in sheep's milk. The column, mobile phase, temperature and flow rate were optimised to provide the best resolution of these analytes. The extraction of the antibiotic residues involves the treatment of protein-free samples with a combination of concentrated sodium hydroxide and ethyl acetate. Necessary defatting is achieved by alkaline hydrolysis. The recovery of each antibiotic was between 55% and 77%, with relative standard deviations ranging from 1% to 6.5%. The limit of quantification was 72.4 microg/kg for ivermectin, 48.3 microg/kg for roxithromycin, and 24.1 microg/kg for erythromycin, oleandomycin, spiramycin, josamycin and tylosin. The procedure was successfully used in the multi-residue determination of these macrolides at levels below the maximum concentrations legally allowed in milk samples.

Heterologous expression of tylosin polyketide synthase and production of a hybrid bioactive macrolide in Streptomyces venezuelae.

Tylosin polyketide synthase (Tyl PKS) was heterologously expressed in an engineered strain of Streptomyces venezuelae bearing a deletion of pikromycin PKS gene cluster using two compatible low-copy plasmids, each under the control of a pikAI promoter. The mutant strain produced 0.5 mg/l of the 16-membered ring macrolactone, tylactone, after a 4-day culture, which is a considerably reduced culture period to reach the maximum production level compared to other Streptomyces hosts. To improve the production level of tylactone, several precursors for ethylmalonyl-CoA were fed to the growing medium, leading to a 2.8-fold improvement (1.4 mg/ml); however, switching the pikAI promoter to an actI promoter had no observable effect. In addition, a small amount of desosamine-glycosylated tylactone was detected from the extract of the mutant strain, revealing that the native glycosyltransferase DesVII displayed relaxed substrate specificity in accepting the 16-membered ring macrolactone to produce the glycosylated tylactone. These results demonstrate a successful attempt for a heterologous expression of Tyl PKS in S. venezuelae and introduce S. venezuelae as a rapid heterologous expression system for the production of secondary metabolites.

Antibacterial activity of soil-bound antibiotics.

There is some concern that antibiotic residues in land-applied manure may promote the emergence of antibiotic resistant bacteria in the environment. The goal of this study was to determine whether or not soil bound antibiotics are still active against bacteria. The procedure involved sorbing various amounts of tetracycline or tylosin on two different textured soils (Webster clay loam [fine-loamy, mixed, superactive, mesic Typic Endoaquolls] and Hubbard loamy sand [sandy, mixed, frigid Entic Hapludolls]), incubating these soils with three different bacterial cultures (an antibiotic resistant strain of Salmonella sp. [Salmonella(R)], an antibiotic sensitive strain of Salmonella sp. [Salmonella(S)], and Escherichia coli ATCC 25922), and then enumerating the number of colony forming units relative to the control. Incubation was done under both static and dynamic conditions. Soil-adsorbed antibiotics were found to retain their antimicrobial properties since both antibiotics inhibited the growth of all three bacterial species. Averaged over all other factors, soil adsorbed antimicrobial activity was higher for Hubbard loamy sand than Webster clay loam, most likely due to higher affinity (higher clay content) of the Webster soil for antibiotics. Similarly, there was a greater decline in bacterial growth with tetracycline than tylsoin, likely due to greater amounts of soil-adsorbed tetracycline and also due to lower minimum inhibitory concentration of most bacteria for tetracycline than tylosin. The antimicrobial effect of tetracycline was also greater under dynamic than static growth conditions, possibly because agitation under dynamic growth conditions helped increase tetracycline desorption and/or increase contact between soil adsorbed tetracycline and bacteria. We conclude that even though antibiotics are tightly adsorbed by clay particles, they are still biologically active and may influence the selection of antibiotic resistant bacteria in the terrestrial environment.

Modeling antimicrobial contaminant removal in slow sand filtration.

Slow sand filters are used in rural regions where source water may be subjected to antimicrobial contaminant loads from waste discharges and diffuse pollution. A numerical model (LETA) was derived to calculate aqueous antimicrobial concentrations through time and depth of a slow sand filter and estimate accumulating contaminant mass in the schmutzdecke. Input parameters include water quality variables easily quantified by water system personnel and published adsorption, partitioning, and degradation coefficients. Simulation results for the tetracycline, quinolone, and macrolide classes of antimicrobials suggested greater than 3-log removal from 1 microg/L influent concentrations within the top 40 cm of the sand column, with schmutzdecke antimicrobial concentrations comparable to other land-applied waste biosolids. A 60-day challenge experiment injecting 1 microg/L tylosin to a pilot slow sand filter showed an average 0.1mg/kg of the antimicrobial remaining in the schmutzdecke layer normally removed during filter maintenance, and this value was the same order of magnitude as the sorbed concentration predicted by the LETA model.

Determination of tylosin in feeds by liquid chromatography with solid-phase extraction.

A method was developed for the determination of tylosin in feeds. The method involves extraction of tylosin with methanol, concentration under a stream of nitrogen, and cleanup using Phenomenex C18 solid-phase extraction cartridge. Analyte separation and quantitation were achieved by gradient reversed-phase liquid chromatography and UV absorbance at 285 nm with a reference wavelength of 320 nm with column temperature of 45 degrees C. Average spike recoveries for samples prepared at 4 spiking levels (22.7, 181, 907, and 1000 g/ton) were 111.0, 94.9, 96.2, and 98.6%, respectively. The overall method precision at each of the 4 spiking levels was < or = 7.85% relative standard deviation. The limits of detection and quantitation (g/ton) were 2.16 and 7.20 g/ton, respectively.

Micellar electrokinetic capillary chromatography of macrolide antibiotics. Separation of tylosin, erythromycin and their related substances.

The separation of tylosin by micellar electrokinetic capillary chromatography with a mixed micelle system is described. Good selectivity was obtained with sodium phosphate buffer (80 mM, pH 7.5) containing 20 mM sodium cholate and 7 mM cetyltrimethylammonium bromide (CTAB). This method permits tylosin to be separated from its closely related substances within 15 min. The influences of type of buffer, buffer pH, the concentrations of sodium cholate and CTAB were investigated. The robustness of the method was examined for tylosin by means of a full-fraction factorial design. Quantitative results are presented. Using a similar buffer system (80 mM sodium phosphate, pH 6.0, 20 mM sodium cholate and 5 mM CTAB), separation of erythromycin and its main related substances was also obtained. However, detection sensitivity and resolution are not sufficient for analysis of related substances in erythromycin commercial samples.