The small screw-apex distance is potentially associated with femoral head osteonecrosis in adults with femoral neck fractures treated by closed reduction and percutaneous 3 parallel cannulated screws.

OBJECTIVE: Femoral neck fractures (FNFs) are among the most common fractures in elderly individuals. Surgery is the main treatment for FNFs, and osteonecrosis of the femoral head (ONFH) is one of the unacceptable complications. This study aimed to assess both the clinical and radiological outcomes in patients with FNFs treated with three parallel cannulated screws and to identify relationship between screws position and ONFH. PATIENTS AND METHODS: A total of 100 patients who were treated with closed reduction and fixed with 3 parallel cannulated screws met the inclusion criteria between January 2014 and December 2020 at authors' institution. The follow-up duration, age, sex, affected side, and injury-to-surgery interval were collected; the neck-shaft angle of both hips, screw-apex distance (SAD) and the tip-apex distance (TAD)were measured; and the Garden classification, quality of reduction and presence of ONFH were evaluated. RESULTS: The sample consisted of 37 males and 63 females, with 60 left and 40 right hips affected. The mean age of patients was 54.93 ± 12.24 years, and the mean follow-up was 56.3 ± 13.38 months. The overall incidence of ONFH was 13%. No significant difference was observed in the incidence of ONFH by affected side, age, fracture displacement, injury-to-surgery interval, neck-shaft angle deviation, or reduction quality. The SAD was significantly shorter in ONFH patients than in normal patients for all three screws (p = 0.02, 0.02, and 0.01, respectively). CONCLUSIONS: The short SAD of all screws is associated with femoral head necrosis of FNFs treated with 3 cannulated screws. The short SAD indicated that screws malpositioning in the weight-bearing area of the femoral head, potentially harming the blood supply and compromising the anchorage of the primary compressive trabeculae in this region.

Finite element study on post-screw removal stress in toy poodle radius with different plate designs and screw arrangements.

Background: The study employs finite element analysis to investigate stress distribution in the radius of toy poodles after screw removal. The examination focuses on the biomechanical implications of varied screw hole configurations using 1.5 and 2.0-mm locking compression plates (LCPs) with notched head T-Plates. Aim: To provide a noninvasive approach to analyzing the immediate consequences of screw removal from the radius bone in toy poodles. Specifically, it explores the impact of varied plate designs and screw arrangements on stress distribution within the forelimb bones. Methods: The study constructs a three-dimensional bone model of the toy poodle's forelimb based on computed tomography (CT) images. Simulations were designed to replicate jumping and landing from a 40 cm height, comparing stress distribution in the radius post-screw removal. Results: The analysis reveals significant variations in stress distribution patterns between the two LCPs. The radius implanted with the 2.0-mm LCP displays a uniform stress distribution, contrasting with the 1.5-mm plates. Localized stress concentration is observed around the screw holes, while trabecular bone regions near the screw holes exhibit lower stress levels. Conclusion: The study highlights the plate designs and screw configurations that affect bone stress in toy poodle forelimbs post-screw removal. The findings provide valuable insights for veterinarians, aiding informed decisions in veterinary orthopedic practices.

Forces required to dynamize sliding screws in gamma nail and selfdynamizable internal fixator.

BACKGROUND: Single limb support phase of the gait-cycle in patients who are treated for a pertrochanteric fracture is characterized by transversal loads acting on the lag screw, tending to block its dynamization. If the simultaneous axial force overcomes transversal loads of the sliding screw, the dynamization can still occur. METHODS: Biomechanical investigation was performed for three types of dynamic implants: Gamma Nail, and two types of Selfdynamizable Internal Fixators (SIF) - SIF-7 (containing two 7 mm non-cannulated sliding screws), and SIF-10 (containing one 10 mm cannulated sliding screw). Contact surface between the stem and the sliding screws is larger in SIF implants than in Gamma Nail, as the stem of Gamma Nail is hollow. A special testing device was designed for this study to provide simultaneous application of a controlled sliding screws bending moment and a controlled transversal load on sliding screws (Qt) without using of weights. Using each of the implants, axial forces required to initiate sliding screws dynamization (Qa) were applied and measured using a tensile testing machine, for several values of sliding screws bending moment. Standard least-squares method was used to present the results through the linear regression model. RESULTS: Positive correlation between Qt and Qa was confirmed (p < 0.05). While performing higher bending moments in all the tested implants, Qa was higher than it could be provided by the body weight. It was the highest in Gamma Nail, and the lowest in SIF-10. CONCLUSIONS: A larger contact surface between a sliding screw and stem results in lower forces required to initiate dynamization of a sliding screw. Patients treated for a pertrochanteric fracture by a sliding screw internal fixation who have longer femoral neck or higher body weight could have different programme of early postoperative rehabilitation than lighter patients or patients with shorter femoral neck.

Peroneal artery injury potential due to different syndesmosis screw placement options: a simulation study with lower extremity computed tomography angiography.

INTRODUCTION: The aim of this study is to assess the risk of peroneal artery injury of hardware placement at the fixation of syndesmotic injuries. MATERIALS AND METHODS: The lower extremity computed tomography angiography was used to design the study. The syndesmosis screw placement range was simulated every 0.5 cm, from 0.5 to 5 cm proximal to the ankle joint. The screw axes were drawn as 20°, 30° or individual angle according to the femoral epicondylar axis. The proximity between the screw axis and the peroneal artery was measured in millimeters. Potential peroneal artery injury was noted if the distance between the peroneal artery to the axis of the simulated screw was within the outer shaft radius of the simulated screw. The Pearson chi-square test was used and a p-value < 0.05 was considered significant. RESULTS: The potential for injury to the peroneal artery increased as the syndesmosis screw level rose proximally from the ankle joint level or as the diameter of the syndesmosis screw increasds. In terms of syndesmosis screw trajection, the lowest risk of injury was observed with the syndesmosis screw angle of 20°. Simulations with a screw diameter of 3.5 mm exhibited the least potential for peroneal artery injury. CONCLUSION: Thanks to this radiological anatomy simulation study, we believe that we have increased the awareness of the peroneal artery potential in syndesmosis screw application. Each syndesmosis screw placement option may have different potential for injury to the peroneal artery. To decrease the peroneal artery injury potential, we recommend the followings. If individual syndesmosis screw angle trajection can be measured, place the screw 1.5 cm proximal to the ankle joint using a 3.5 mm screw shaft. If not, fix it with 30° trajection regardless of the screw diameter at the same level. If the most important issue is the peroneal artery circulation, use the screw level up to 1 cm proximal to the ankle joint regardless of the screw angle trajection and screw diameter.

A 56-Year-Old Woman Presenting 19 Years After Pubic Bone Fracture with a Surgical Screw Foreign Body in the Bladder.

BACKGROUND Non-calculus foreign bodies in the bladder are rare and are usually introduced via the urethra. Reports of the migration of metallic foreign bodies from previous surgery are uncommon and mainly associated with surgical screws used for the internal fixation of pubic bone fracture and total hip replacement. This report is of a 56-year-old woman presenting with a surgical screw foreign body in the bladder 19 years after open surgical reduction and internal plate and screw fixation of traumatic fracture of the pubic bone. CASE REPORT A 56-year-old woman visited a urologist because of gross hematuria. She mentioned a mild pelvic pain and multiple lower urinary tract infections over the past 2 years, with no other symptoms. From the previous history, she had undergone an open reduction and internal fixation of the pelvic ring, with surgical plates and screws following pubic bone's fracture, due to an accident 19 years earlier. Cystoscopy identified the presence of a screw head protruding into the bladder wall. The screw was extracted via open surgery, and the patient was discharged 2 days later. CONCLUSIONS While intravesical foreign bodies are rarely seen in Emergency Departments, clinicians should maintain a level of suspicion in certain cases. The purpose of this case report is to present the unlikely and delayed complication of internal pubic bone fixation resulting in the migration of a fixation screw to the bladder. It also highlights the importance of imaging in diagnosis and localization of the foreign body in the bladder.

Robot-assisted Temporary Hemiepiphysiodesis With Eight-plates for Lower Extremity Deformities in Children.

PURPOSE: This study was performed to compare the radiographic results of robot-assisted and traditional methods of treating lower extremity deformities (LEDs). METHODS: From January 2019 to February 2022, 55 patients with LEDs were treated by temporary hemiepiphysiodesis with eight-plates. They were divided into a robot group and a freehand group. The fluoroscopy time and operation time were recorded. The accuracy of screw placement was measured after the operation using the following parameters: coronal entering point (CEP), sagittal entering point (SEP), and angle between the screw and epiphyseal plate (ASEP). The limb length discrepancy (LLD) and femorotibial angle (FTA) were measured before the operation, after the operation, and at the last follow-up. Patients were followed up for 12 to 24 months, and the radiographic results of the 2 groups were compared. RESULTS: Among the 55 patients with LEDs, 36 had LLD and 19 had angular deformities. Seventy-six screws were placed in the robot group and 85 in the freehand group. There was no difference in the CEP between the 2 groups ( P >0.05). The robot group had a better SEP (2.96±1.60 vs. 6.47±2.80 mm) and ASEP (3.46°±1.58° vs. 6.92°±3.92°) than the freehand group ( P <0.001). At the last follow-up, there was no difference in the LLD or FTA improvement between the two groups ( P >0.05). The incidence of complications was significantly lower in the robot group than in the freehand group (0/27 vs. 5/28, P <0.05). CONCLUSION: Robot-assisted temporary hemiepiphysiodesis with eight-plates is a safe and effective method for treating LEDs in children. Robotic placement of screws is superior to freehand placement with respect to the entering position and direction. Although the correction effect for LLD and angular deformity is similar, screw dislocation is less common when using robot assistance. LEVELS OF EVIDENCE: Level-III. Retrospective comparative study.

Treatment of non-displaced intracapsular femoral neck fractures with dynamic hip and cannulated screws resulting in avascular necrosis: A comparative study of complications.

OBJECTIVES: To compare the complications associated with cannulated hip screws (CHS) and dynamic hip screws (DHS) techniques. METHODS: In this multicenter retrospective chart study, we reviewed the records and data of all patients operated upon by DHS or CHS for treatment of Garden type I and type II intracapsular non-displaced femoral neck fracture from January 2017 to December 2022. Patients with incomplete files or follow-ups of less than one year were excluded from the study. RESULTS: The study enrolled 85 patients, 35 males, and 50 females, with a mean age of 72±5.4 for males and 70.6±7.6 for females. A total of 44 patients were operated upon with DHS, and 41 patients with CHS. The mortality rate of DHS was 15.9% and was 17.1% in the CHS group (p>0.05). Non-union was recorded in 4.5% of the DHS group and 4.9% of CHS patients (p>0.05). Avascular necrosis (AVN) was significantly higher in DHS (9.1%) than in CHS (4.9%, p<0.05). A revision was required in 15.9% of DHS patients and 14.6% of CHS patients (p>0.05). CONCLUSION: This study found that DHS was superior to CHS in AVN rate. However, there was no significant difference between both methods regarding mortality, revision, and non-union.

All-suture fixation of syndesmotic injuries: a case series.

BACKGROUND: To retrospectively evaluate the clinical outcomes of patients treated for syndesmotic injuries with an all-suture construct technique and compare their patient reported outcome scores with historically published outcomes of syndesmotic injuries fixed with suspensory suture buttons. METHODS: This was a retrospective case series of patients treated at a Level 1 Trauma Center from May 1, 2018, to June 30, 2022. Ten patients aged 18 and older with unstable syndesmotic injuries treated with all-suture repair. Patients were excluded if they were treated with trans-osseous screws, had previous failed syndesmotic fixation, or suspensory suture button fixation. Patient-reported outcomes including Visual Analog Scale (VAS) pain scores, American Orthopaedic Foot and Ankle Society (AOFAS) ankle and hindfoot scores, and complications were recorded. RESULTS: In the patients with 6 weeks or more of radiographic follow-up (N = 9), there was no evidence of nonunion, loss of fixation, hardware complication, or whitling of the fibula by the suture. At final follow-up average VAS pain scores were 1.5 out of 10 (range 0-4; SD 1.2), AOFAS ankle and hindfoot scores averaged 89.6 out of 100 (range 86-100; SD 6.1). The pain subscale of the AOFAS score averaged 37.5 out of 40 (range 35-40; SD 2.5). The functional subscale of the AOFAS score averaged 46 out of 50 (range 44-50; SD 3.0). Stiffness was reported in one patient at their follow-up visits, which resolved with continued physical therapy. There were no superficial or deep infections. CONCLUSIONS: In conclusion, this case series presents the first clinical outcomes of an all-suture fixation technique for treatment of unstable syndesmotic ankle injuries. Our results suggest that the all-suture fixation technique results in similar patient reported outcomes when compared with historically reported patient reported outcomes of suspensory suture button fixation, and low rates of complication or hardware failure.

Ten-year outcomes of anterior cruciate ligament reconstruction with hamstring tendon autograft and femoral fixation with a cortico-cancellous screw suspension device.

PURPOSE: To evaluate the clinical and radiographic outcomes of anterior cruciate (ACL) reconstruction at minimum 10-year follow-up. METHODS: Ninety-three patients who underwent primary unilateral ACL reconstruction with hamstring tendon autograft, transtibial technique and femoral cortico-cancellous screw suspension device (Athrax, Leader Medica s.r.l) between 2010 and 2012 were retrospectively reviewed. Mean follow-up was 136 months. Evaluation was performed using the International Knee Documentation Committee score (IKDC), Knee injury and Osteoarthritis Outcome Score (KOOS), Lysholm Knee Score and Tegner Activity Level Scale. Incidence of OA was determined by comparing standard anteroposterior and lateral weightbearing radiographs of the ACL-reconstructed and contralateral knee. Osteoarthritis severity was graded according to the Kellgren-Lawrence (KL) score. RESULTS: Median Tegner activity level was 6 (5-7). Lysholm and IKDC scores were 100 (95-100) and 90 (86-95), respectively, KOOS was 98 (95-100). Of ACL-reconstructed knees, 41 (50%) had radiographic OA, of which 6 (7.3%) had severe OA (KL III). Of the contralateral healthy knees, 28 (34.1%) had radiographic evidence of OA. Of these 22 (26.8%) and 6 (7.3%) patients had, respectively, KL-I and KL-II. 11 patients (11.8%) underwent subsequent knee surgery: 5 (5.4%) revisions, 3 (3.2%) meniscal surgeries, 2 (2.2%) other surgeries, 1 (1.1%) contralateral ACL reconstruction. CONCLUSIONS: The study demonstrates that ACL reconstruction with HT autograft and cortico-cancellous screw suspension device determines satisfying clinical results after 10 years of follow-up. From our cohort, a low rate of graft failure has been reported, even though almost 50% of patients present a knee OA greater or equal to grade II KL.

Greater tuberosity medial malposition: does it affect shoulder abductor moment?

PURPOSE: The detrimental effect of greater tuberosity malposition on functional scores is well known. Superior or posterior malpositions exceeding five mm lead to excessive loading on the deltoid strength. However, the significance of situations where greater tuberosity becomes medialized due to the compressive effect of the locking plate fixation, especially in fractures with metaphyseal dead space, has not been emphasized. It is hypothesized that this condition may cause shortening of the rotator cuff moment arm and consequently impact functional scores. METHODS: Between 2012 and 2018, 52 patients, aged 65,28 (ranging 40-85) proximal humerus fractures treated with locking plate fixation were included in the study. Cephalodiaphyseal angle, greater tuberosity displacement , patients reported outcome and Constant-Murley scores were evaluated. RESULTS: The mean Constant Murley score was determined to be 78.76 (ranging from 38 to 100). According to the patients reported outcome 39 excellent , five good , two fair, six poor results were observed. Avascular necrosis with screw migration was detected in five cases, while one patient experienced implant insufficiency along with varus deformity. Greater tuberosity was found to be positioned between 6 mm posterior-superior and -13 mm medial. Significant medial malposition was observed in three patients, with -9, -12, and -13 mm of medialization, respectively. Cephalodiaphysial angle was determined as 139.30 degrees (ranging from 120 to 150 degrees) and showed weak correlation with the functional score. Greater tuberosity medialization also showed weak correlation with the Constant-Murley score. The values exhibiting deviation were associated with low patient-reported outcome results and functional scores. In the examination of greater tuberosity displacement values, it was observed that Neer type 3 and 4 fractures differed significantly from Neer type 2 fractures regarding to Kruskal-Wallis test. CONCLUSIONS: Medial impaction of greater tuberosity may be the reason of decreased functional scores, similar to superior or posterior malposition. The medialization of greater tuberosity should be considered as a potential factor leading to the shortening of the rotator cuff's abductor moment.

Anterior Malreduction is Associated With Lag Screw Cutout After Internal Fixation of Intertrochanteric Fractures.

BACKGROUND: Lag screw cutout is a devastating complication after internal fixation of an intertrochanteric fracture. Although the tip-apex distance (TAD) is known to be associated with this complication, another factor we thought was potentially important-fracture reduction on an oblique lateral view-has not, to our knowledge, been explored. QUESTIONS/PURPOSES: (1) Is a well-reduced fracture position on an oblique lateral view after internal fixation of intertrochanteric fracture associated with a lower odds of postoperative cutout, independently of the TAD? (2) Is postoperative sliding of the lag screw after fixation associated with postoperative cutout? METHODS: Patients with intertrochanteric fractures who were at least 65 years old and who had been treated with internal fixation in one of six facilities between July 2011 and December 2017 were included. All patients in the study group had lag screw cutout, and controls were selected by risk-set sampling of age-matched and sex-matched patients using a ratio of 4:1 for patients from each hospital. Of the 2327 intertrochanteric fractures, there were 36 patients (0.02 per person-year), with a mean age of 85 years; 89% (32) were women. In the control group, there were 135 controls. There was no difference in age or sex between the two groups. Sagittal reduction was evaluated using an immediate postoperative oblique lateral radiograph (anterior malreduction versus anatomic reduction or posterior malreduction). The association between anterior malreduction and the odds of cutout was estimated by conditional logistic regression analysis with the TAD and interaction between the TAD and the reduced position as covariates. As a sensitivity analysis, we estimated whether sliding within 2 weeks postoperatively was associated with cutout. RESULTS: After controlling for the potentially confounding variables of age and sex, we found that anterior malreduction was independently associated with a higher odds of cutout compared with anatomic reduction or posterior malreduction (adjusted OR 4.2 [95% CI 1.5 to 12]; p = 0.006). There was also an independent association between cutout and larger TAD (≥ 20 mm) (adjusted OR 4.4 [95% CI 1.4 to 14]; p = 0.01). However, the association between cutout and reduction was not modified by the TAD (adjusted OR of interaction term 0.6 [95% CI 0.08 to 4]; p = 0.54). Postoperative sliding ≥ 6 mm within 2 weeks was associated with higher odds of cutout after adjusting for age and sex (adjusted OR 11 [95% CI 3 to 40]; p < 0.001). CONCLUSION: In patients older than 65 years with intertrochanteric fractures, anterior malreduction on a lateral oblique view was associated with much greater odds of postoperative cutout than anatomic reduction or posterior malreduction. Because anterior malreduction is within the surgeon's control, our findings may help surgeons focus on intraoperative reduction on an oblique lateral view to prevent cutouts. Although this factor is a reliable indicator, the results should be applied to cephalomedullary nails, because there was only one patient with cutout among those with sliding hip screws. Because this study was conducted in a homogenous Japanese population, future studies should focus on the association between anterior malreduction and cutout in people of different ethnicities, adjusting for confounding factors such as implant type and surgeon level. LEVEL OF EVIDENCE: Level III, therapeutic study.

Prospective evaluation of ultrasound features of magnesium-based bioabsorbable screw resorption in pediatric fractures.

OBJECTIVE: Bioabsorbable magnesium-based alloy screws release gas upon resorption. The resulting findings in the adjacent soft tissues and joints may mimic infection. The aim of the study was to evaluate the ultrasound (US) findings in soft tissues and joints during screw resorption. METHODS: Prospectively acquired US studies from pediatric patients treated with magnesium screws were evaluated for screw head visibility, posterior acoustic shadowing, twinkling artifact, foreign body granuloma, gas (soft tissue, intra-articular), alterations of the skin and subcutaneous fat, perifascial fluid, localized fluid collections, hypervascularization, and joint effusion. RESULTS: Sixty-six US studies of 28 pediatric patients (nfemale = 9, nmale = 19) were included. The mean age of the patients at the time of surgery was 10.84 years; the mean time between surgery and ultrasound was 128.3 days (range = 6-468 days). The screw head and posterior acoustic shadowing were visible in 100% of the studies, twinkling artifact in 6.1%, foreign body granuloma in 92.4%, gas locules in soft tissue in 100% and intra-articular in 18.2%, hyperechogenicity of the subcutaneous fat in 90.9%, cobblestoning of the subcutaneous fat in 24.2%, loss of normal differentiation between the epidermis/dermis and the subcutaneous fat in 57.6%, localized fluid collection in 9.9%, perifascial fluid in 12.1%, hypervascularization in 27.3%, and joint effusion in 18.2%. CONCLUSION: US findings in pediatric patients treated with magnesium screws strongly resemble infection, but are normal findings in the setting of screw resorption. CLINICAL RELEVANCE STATEMENT: Bioabsorbable magnesium-based alloy screws release gas during resorption. The resulting US findings in the adjacent soft tissues and joints in pediatric patients may mimic infection, but are normal findings. KEY POINTS: • Bioabsorbable magnesium-based alloy screws release gas upon resorption. • The resulting ultrasound findings in children's soft tissues and joints closely resemble those of soft tissue infection or osteosynthesis-associated infection. • Be familiar with these ultrasound findings in order to avoid inadvertently misdiagnosing a soft tissue infection or osteosynthesis-associated infection.

Dynamic hip screw in proximal femoral fractures followed by "single-stage" hip arthroplasty-retrospective analysis.

The aim of this study is to present the results of single-stage total hip arthroplasty (THA) after Dynamic Hip Screw (DHS) failure, or secondary posttraumatic osteoarthrosis. From 2003 to 2020, 15 THAs were performed in group of 15 patients for the treatment of DHS failure, or for late complications following femoral neck and pertrochanteric fractures. The mean follow-up period after arthroplasty was 46.9 months (range 7-139). The patients were evaluated retrospectively-both clinically and radiographically, focussing on the demography, infection rate and other complications (revision surgery), during the year 2023. 9 males and 6 females were included in the study, with a mean age of 56.5 years (range 29-93) at the time of primary osteosynthesis. Each of them had proximal femoral fracture treated primarily with a DHS and then late one-stage revision surgery, with hardware removal and THA implantation. The median time between DHS osteosynthesis and THA was 41.2 months (range 4-114). Four patients (26.6%) had complications after THA, with the need for revision in two cases (13.3%). Dislocation rate was 6.6% (one case), with the need for repeated-revision of THA. The infection rate was 6.6% (one patient) with the need for revision of THA. Peroperative periprosthetic femoral fracture was observed in 13.3% (two patients) without any other problems. Six patients (40%) died during the follow-up period. Single-stage total hip arthroplasty with concomitant hardware removal bears a high- mortality rate, with a higher incidence of postoperative complications compared to elective THA.

Risk avoidance of screw-induced suprascapular nerve injury in arthroscopic Latarjet procedure and reliable anatomical landmark analysis of Latarjet surgery.

OBJECTIVE: Shoulder dislocation represents a prevalent category within joint dislocation, accounting for about 40% of all joint dislocations, and anterior dislocation stands out as the prevailing type. It has been reported that in 1.6% of patients, the Latarjet procedure performed under arthroscopy involves transferring the coracoid process to the anterior-inferior aspect of the glenoid and fixing it with two bicortical screws. The tip of the screws may impinge the suprascapular nerve located behind the scapula, resulting in shoulder pain and weakness. This study was performed to analyze the risk of suprascapular nerve (SSN) injury caused by bicortical screws during arthroscopic Latarjet surgery and to identify reliable anatomical landmarks for Latarjet surgery. MATERIALS AND METHODS: Dissection was conducted on 23 fresh adult intact shoulder joint specimens, and the experimental protocol complied with the hospital's ethical requirements for research. Using the glenoid clock face as a reference, the distances between the suprascapular nerve and the anterior edge of the glenoid were measured at the 12:00, 11:00, 10:00, and 9:00 positions, as well as at the level of the suprascapular notch and the level of the spinoglenoid notch. The distances between the suprascapular nerve and the narrowest point of the glenoid rim and the clock scale were recorded. The scapula was divided into three zones, and the number of nerve branches in each zone was recorded. The collected data were subjected to statistical analysis. The suprascapular nerve trunk and branches were marked using radiopaque lines, and measurements were taken at three positions in computed tomography horizontal scans: the suprascapular foramen, the spinoglenoid notch, and the point of entry of the outermost nerve branch into the muscle. RESULTS: The suprascapular nerve originates from the brachial plexus, passes downward and backward through the suprascapular foramen, closely adheres to the bone surface, and runs outward and downward deep to the supraspinatus muscle. The distances between the suprascapular nerve and the glenoid rim at the 12:00, 11:00, 10:00, and 9:00 positions were 335.18±2.31 mm, 28.23±3.47 mm, 22.32±2.78 mm, and 22.12±2.07 mm, respectively. There was a mean of 1.12 nerve branches in zone 1, 2.86 in zone 2, and 3.64 in zone 3. In the neutral position of the shoulder joint, the horizontal distance between point A and the axillary nerve was 27.37 (19.80, 34.55) mm, and the vertical distance was 16.67 (12.85, 20.35) mm. CONCLUSIONS: The use of bicortical screws, especially upper screws, for Latarjet fixation at the level of the spinoglenoid notch, is associated with the risk of suprascapular nerve injury. The narrowest distance between the glenoid rim and the suprascapular nerve was found between 9:00 and 9:30 at the glenoid clock surface. Therefore, caution should be exercised when performing any procedure related to this area. Overall, the Latarjet procedure is a reliable and effective surgical technique, providing benefits such as favorable positioning of the coracoid graft and low bone absorption rate, while also avoiding the potential for suprascapular nerve injury.

[Epidemiological and evolutionary aspects of patients aged 65 and over operated on for fracture of the upper end of the femur: prospective observational study]. / Aspects épidémiologiques et évolutifs des patients âgés de 65 ans et plus opérés pour une fracture de l'extrémité supérieure du fémur : étude observationnelle prospective.

Fractures of the upper end of the femur (FUEF) are a serious complication for the elderly, affecting 1,3 million patients a year worldwide (1). Studies dedicated to the post-operative follow-up of patients operated on for hip fracture in the long term are rare. The aim was to determine the epidemiological and evolutionary profile focusing on morbidity and mortality (survival and functional and cognitive decline) in the year following surgery for FUEF in patients aged over 65. Methods: Prospective observational study. Geriatric data were collected at the time of surgical management of FUEF with postoperative assessment of vital, functional and cognitive status. Results: Over a period of 24 months, 119 patients underwent surgery in the Orthopaedics-Traumatology Department of the University Hospital of Annaba. The patients were initially all independent (Instrumental Activities of Daily Living [IADL] 4 ≥ 3) and had no pre-operative cognitive disorders. There were 32 men and 87 women. The mean age was (77,4 ± 8,2) years with extremes of 65 and 100 years. All lesions were unilateral, with a predominance on the right. Most were trochanteric fractures (72 %). The most common aetiological circumstances were falls following domestic accidents. Eighty-seven patients received spinal anaesthesia, 19 received a general anaesthetic and 13 received an epidural. The average intervention time was 5,11 ± 4,17 days, with extremes of zero and 18 days. Depending on the treatment performed, 14 Dynamic hip Screw (DHS), three centro-medullary nailings, 33 plate blades and 24 plate nails and 15 gamma nails, 28 Moore's prosthesis, 2 screwings. The average length of stay was seven days. The one-year mortality rate for the 119 patients was 19,3 %. Patients who died after one year were malnourished (13,2 %, p = 0,05) with high comorbidity (ASA 2(78 %) and ASA 3(13 %) (p < 0,01 and p = 0,05). Of the survivors, 27 % had postoperative cognitive decline. Death occurred on average at 82,17 days. Conclusion: FUEF remains a real public health problem in terms of its prevalence, prognosis and cost. The mortality rate of patients aged over 65 years at one year post-operatively following an ESF was 19 %, which calls for the creation of a specialised orthogeriatric unit.

Perioperative peri-implant fracture after osteosynthesis for geriatric femoral pertrochanteric fracture with the linear compression integrated screw intramedullary nail system (INTERTAN™): a retrospective study.

BACKGROUND: Osteosynthesis for geriatric femoral pertrochanteric fractures using the linear compression integrated screw intramedullary nail system (INTERTAN™) has become popular. Nonetheless, cases of perioperative peri-implant fractures have been reported following this surgical technique. The factors responsible for this complication remain unclear. Therefore, we investigated perioperative peri-implant fracture risk factors and incidence, as well as overall outcomes, using the INTERTAN™ system for geriatric femoral pertrochanteric fractures. METHODS: We retrospectively reviewed 98 consecutive patients with geriatric femoral pertrochanteric fractures after INTERTAN™ fixation, with at least a 12-month follow-up period between May 2020 and April 2022 at a single medical institute. The patients' demographic characteristics, fracture pattern, quality of reduction, quality of fixation, nail length, morphology of the femur, and perioperative complications were recorded and analyzed. RESULTS: Among the 98 patients, 92 achieved union during follow-up. Twelve perioperative peri-implant fractures (12.2%) were recorded, all of which occurred during or within 1 month of osteosynthesis. Except for one patient who underwent re-osteosynthesis, the others underwent nonoperative treatment, and all achieved union. Multiple regression analysis revealed morphology of the femur with low-lesser trochanter width (odds ratio (OR) 0.532, 95% confidence interval (CI) 0.33-0.86, p = 0.01) to be the only factor contributing to perioperative peri-implant fractures. When the Youden index was used, the optimal cut-off value was 20.2 mm of low-lesser trochanter width. Low-lesser trochanter width < 20.2 mm was found to be a potential factor causing perioperative peri-implant fractures (OR 17.81, 95% CI 1.67-19.76, p = 0.017). CONCLUSIONS: Morphology of the femur with a low-lesser trochanter width smaller than 20.2 mm was found to be the only potential contributor to perioperative peri-implant fractures when using INTERTAN™ for geriatric femoral pertrochanteric fractures. Care should be taken during osteosynthesis, focusing not only on the fracture site but also on the femoral cortex around the implant. Although perioperative peri-implant fractures were observed within one month following osteosynthesis, the majority of these cases were effectively treated without surgical intervention.

Treatment of intertrochanteric fractures using cephalomedullary nail: One or two cephalic screws?

OBJECTIVES: To determine the incidence of cut-out, cut-in, cut-through, Z-effect, and reverse Z-effect in two cephalomedullary nail (CMN) systems: one with single cephalic screw fixation and the other with dual-screw fixation using a lag screw and an anti-rotation screw. METHODS: A retrospective study from a cohort of patients was conducted between January 2017 and August 2019 in patients with intertrochanteric fractures treated with osteosynthesis using CMN. RESULTS: One hundred ninety-six patients with intertrochanteric fractures who met the inclusion criteria were recruited. The median age was 81 years [interquartile range (IQR) 12]. Seventy-six percent had fractures classified as Orthopaedic Trauma Association/Arbeitsgemeinschaft für Osteosynthesefragen (OTA/AO) 31A2. Twenty-one mechanical complications occurred, 8.7% (17) was cut-out with a single cephalic screw CMN and 2% (4) was Z-effect with a dual-screw CMN non-integrated. The median tip-apex distance (TAD) was 19.4 mm (IQR 10.8) in patients who experienced cut-out and 19 mm (IQR 10) in those who experienced Z-effect. The median time to cut-out occurrence was 39,5 days (IQR 47,5), while the median time to Z-effect was 90 days (IQR 86). CONCLUSIONS: The incidence of osteosynthesis failure using CMN is more frequent in patients treated with a single cephalic screw CMN. LEVEL OF EVIDENCE: Therapeutic, Level III.

A clinical tip for conservative retrieval of fractured abutment screw.

Fractures of the abutment screw are an extremely dreadful and taxing experience even for experienced clinicians. Retrieval of fractured screw segments due to excessive torque and improperly placed implants pose a great challenge to the clinician. The authors present a case wherein the fractured abutment screw was retrieved successfully with the help of an intraoral plastic mixing tip of light body putty material. The intraoral plastic mixing tips are a more readily available, cost-effective, and feasible alternative to other means of screw retrieval like ultrasonic scalers, endodontic files, and screw retrieval kits.