A novel elastic and controlled-release poly(ether-ester-urethane)urea scaffold for cartilage regeneration.

In the tissue engineering of cartilage, scaffolds with appropriate elasticity and controlled-release properties are essential. Herein, we synthesized a poly(ether-ester-urethane)urea scaffold with a pendant amino group (PEEUUN) through a de-protection process from PEEUU-Boc polymers and grafted kartogenin (KGN) onto the PEEUUN scaffolds (PEEUUN-KGN). Characterization, performance tests, scaffold biocompatibility analysis, and chondrogenesis evaluation both in vitro and in vivo were conducted. The results revealed that the PEEUUN-KGN scaffolds were degradable and three-dimensional (3D) with interconnected pores, and possessed good elasticity, as well as excellent cytocompatibility. Meanwhile, KGN on the PEEUUN-KGN scaffolds underwent stable sustained release for a long time and promoted human umbilical cord mesenchymal stem cells (HUCMSCs) to differentiate into chondrocytes in vitro, thus enhancing cartilage regeneration in vivo. In conclusion, the present PEEUUN-KGN scaffolds would have application potential for cartilage tissue engineering.

New Insight on the Study of the Kinetic of Biobased Polyurethanes Synthesis Based on Oleo-Chemistry.

Nowadays, polyols are basic chemicals for the synthesis of a large range of polymers, such as polyurethane foams (PUF), which are produced with several other compounds, such as polyisocyanates. During the last decades, the oleo-chemistry has developed several routes from glycerides to polyols for the polyurethanes (PU) industry to replace mainly conventional fossil-based polyols. A large range of biobased polyols can be now obtained by epoxidation of the double bonds and ring-opening (RO) of the subsequent epoxides with different chemical moieties. In preliminary studies, the RO kinetics of an epoxidized model molecule (methyl oleate) with ethanol and acetic acid were investigated. Subsequently, polyols that were derived from unsaturated triglycerides were explored in the frame of e.g., PUF formulations. Different associations were studied with different mono-alcohols derived from epoxidized and ring-opened methyl oleate while using several ring-openers to model such systems and for comparison purposes. Kinetic studies were realized with the pseudo-first-order principle, meaning that hydroxyls are in large excess when compared to the isocyanate groups. The rate of isocyanate consumption was found to be dependent on the moiety located in ß-position of the reactive hydroxyl, following this specific order: tertiary amine >> ether > ester. The tertiary amine in ß-position of the hydroxyl tremendously increases the reactivity toward isocyanate. Consequently, a biobased reactive polyurethane catalyst was synthesized from unsaturated glycerides. These approaches offer new insights regarding the replacement of current catalysts often harmful, pungent, and volatile used in PU and PUF industry, in order to revisit this chemistry.

Automated Synthesis Protocol of Sequence-Defined Oligo-Urethane-Amides Using Thiolactone Chemistry.

An automated, iterative protocol for the synthesis of multifunctional, sequence-defined oligo-urethane-amides using thiolactone chemistry is reported. Here, sequenced functionalization of the backbone is easily introduced using commercially available primary amines. The chemistry is carried out on solid phase using different supports for better optimization of the synthetic protocol and in order to demonstrate the versatility of the approach. This technique is very effective for iterative synthesis and solid-phase chemistry and enables the exploration of full automation of this approach using a robotic peptide synthesizer. As a result, this automated protocol allows for the synthesis of a sequence-defined nonamer of high purity.

Structural and bone marrow stem cell biocompatibility studies of hydrogel synthesized via chemo-enzymatic route.

Natural biopolymers have many attractive medical applications; however, complications due to fibrosis caused a reduction in diffusion and dispersal of nutrients and waste products. Consequently, severe immunocompatibility problems and poor mechanical and degradation properties in synthetic polymers ensue. Hence, the present study investigates a novel hydrogel material synthesized from caprolactone, ethylene glycol, ethylenediamine, polyethylene glycol, ammonium persulfate, and tetramethylethylenediamine via chemo-enzymatic route. Spectroscopic analyses indicated the formation of polyurea and polyhydroxyurethane as the primary building block of the hydrogel starting material. Biocompatibility studies showed positive observation in biosafety test using direct contact cytotoxicity assay in addition to active cellular growth on the hydrogel scaffold based on fluorescence observation. The synthesized hydrogel also exhibited (self)fluorescence properties under specific wavelength excitation. Hence, synthesized hydrogel could be a potential candidate for medical imaging as well as tissue engineering applications as a tissue expander, coating material, biosensor, and drug delivery system.

Synthesis, antiproliferative activity and molecular docking of thiocolchicine urethanes.

A number of naturally occurring compounds such as paclitaxel, vinblastine, combretastatin, and colchicine exert their therapeutic effect by changing the dynamics of tubulin and its polymer form, microtubules. The identification of tubulin as a potential target for anticancer drugs has led to extensive research followed by clinical development of numerous compounds from several families. In this paper we report on the design, synthesis and in vitro evaluation of a group of thiocolchicine derivatives, modified at ring-B, labelled here compounds 4-14. These compounds have been obtained in a simple reaction of 7-deacetyl-10-thiocolchicine 3 with eleven different alcohols in the presence of triphosgene. These novel agents have been checked for anti-proliferative activity against four human cancer cell lines and their mode of action has been confirmed as colchicine binding site inhibition (CBSI) using molecular docking. Molecular simulations provided rational tubulin binding models for the tested compounds. On the basis of in vitro tests, derivatives 4-8 and 14 demonstrated the highest potency against MCF-7, LoVo and A549 tumor cell lines (IC50 values = 0.009-0.014 µM). They were more potent and characterized by a higher selectivity index than several standard chemotherapeutics including cisplatin and doxorubicin as well as unmodified colchicine. Further, studies revealed that colchicine and its several derivatives arrested MCF-7 cells in mitosis, while its selected derivatives caused microtubule depolymerization.

2D Sequence-Coded Oligourethane Barcodes for Plastic Materials Labeling.

Mixtures of uniform sequence-defined oligourethanes are evaluated as 2D molecular barcodes for labeling three different commodity polymers, namely polystyrene, polyvinylchloride and polyethylene terephthalate. Six different oligourethanes are synthesized by solid-phase iterative synthesis and are coded using a binary monomer alphabet. High-resolution mass spectrometry studies indicate that all oligomers are uniform and sequence-defined. However, instead of using them as individual coded chains, oligomers with different chain-length, mass and sequence are mixed into intentionally polydispersed libraries. In particular, a three-component library and a four-component library are created to encode a 2-bytes model binary sequence. These 2D-coded libraries are incorporated in all commodity plastics via a simple solvent casting procedure. Furthermore, in all cases, the oligomer mixtures can be extracted from the host polymer films and deciphered by mass spectrometry, thus opening interesting avenues for anti-counterfeiting and traceability applications.

Fast and Facile Synthesis of 4-Nitrophenyl 2-Azidoethylcarbamate Derivatives from N-Fmoc-Protected α-Amino Acids as Activated Building Blocks for Urea Moiety-Containing Compound Library.

A fast and facile synthesis of a series of 4-nitrophenyl 2-azidoethylcarbamate derivatives as activated urea building blocks was developed. The N-Fmoc-protected 2-aminoethyl mesylates derived from various commercially available N-Fmoc-protected α-amino acids, including those having functionalized side chains with acid-labile protective groups, were directly transformed into 4-nitrophenyl 2-azidoethylcarbamate derivatives in 1 h via a one-pot two-step reaction. These urea building blocks were utilized for the preparation of a series of urea moiety-containing mitoxantrone-amino acid conjugates in 75-92% yields and parallel solution-phase synthesis of a urea compound library consisted of 30 members in 38-70% total yields.

Genotoxicity and cytotoxicity assessment of new ethyl-carbamates with ixodicidal activity.

The mammalian erythrocyte micronucleus test was used on the peripheral blood of Wistar rats exposed to two new ethyl-carbamates: ethyl-4-bromophenyl-carbamate (LQM 919) and ethyl-4-chlorophenyl-carbamate (LQM 996) to analyze their genotoxic potential. The mitotic index and cell proliferation kinetics in human lymphocyte cultures in the presence of these ethyl-carbamates were used to evaluate cytotoxicity and cytostaticity respectively. Exposure to greater acute doses (300mg/kg) and to all of the subchronic doses (12.5, 25 and 50mg/kg daily for 90 days) of these ethyl-carbamates induced an increased frequency (p<0.05) of micro-nucleated polychromatic erythrocytes (MN-PCE) compared with rats not exposed to the ethyl-carbamates. Increases in MN-PCE was higher in males than in females exposed to LQM 996 50mg/Kg (p<0.05). All observed changes in rats return 21days after suspending ethyl-carbamate exposure. The highest concentration (0.3mM) of both ethyl-carbamates in lymphocyte cultures increased the percentage of cells in first division metaphase and decreased the percentage of cells in third division metaphase, indicating an increase in cell cycle length or a possible cell cycle arrest in metaphase (cytostatic effect). The results of this study show that the evaluated ethyl-carbamates may induce genotoxic damage in rats and alterations in the human lymphocyte cell cycle.

Synthesis and characterization of polyhedral oligomeric titanized silsesquioxane: A new biocompatible cage like molecule for biomedical application.

Organic-inorganic hybrid materials have shown improved properties to be used as biocompatible coating in biomedical applications. Polyhedral oligomeric silsesquioxane (POSS) containing coatings are among hybrid materials showing promising properties for these applications. In this work an open cage POSS has been reacted with a titanium alkoxide to end cap the POSS molecule with titanium atom to obtain a so called polyhedral oligomeric metalized silsesquioxane (POMS). The synthesized POMS was characterized by FTIR, RAMAN and UV-visible spectroscopy as well as (29)Si NMR and matrix assisted laser desorption/ionization time-of-flight (MALDI-TOF) techniques. Appearance of peaks at 920 cm(-1) in FTIR and 491 cm(-1) and 1083 cm(-1) in Raman spectra confirmed Si-O-Ti linkage formation. It was also demonstrated that POMS was in a monomeric form. To evaluate the biocompatibility of hybrids films, pristine POSS and synthesized POMS were used in synthesis of a polycarbonate urethane polymer. Results revealed that POMS containing hybrid, not only had notable thermal and mechanical stability compared to POSS containing one, as demonstrated by DSC and DMTA analysis, they also showed controlled surface properties in such a manner that hydrophobicity and biocompatibility were both reachable to give rise to improved cell viability in presence of human umbilical vein endothelial cells (HUVEC) and MRC-5 cells.

Interfacial thiol-isocyanate reactions for functional nanocarriers: a facile route towards tunable morphologies and hydrophilic payload encapsulation.

Functional nanocarriers were synthesized using an in situ inverse miniemulsion polymerization employing thiol-isocyanate reactions at the droplet interface to encapsulate hydrophilic payloads. The morphology of the nanocarriers is conveniently tunable by varying the reaction conditions and the dispersions are easily transferable to the aqueous phase.

Preparation and characterization of fractal elastomer surfaces.

The elastomer materials with hierarchical structure and suitable wettability are useful as biological surface model. In the present study, urethane resin and silicone resin elastomers with hierarchical rough surfaces were prepared and referred to as "fractal elastomers". We found a hierarchy of small projections that existed over larger ones on these surfaces. These elastomers were synthesized by transferring a fractal surface structure of alkylketene dimer. The rough structure enhanced the hydrophobicity and weakened friction resistance of the elastomer surfaces. These materials can be useful for artificial skin with biomimetic surface properties.

Fluorescence imaging enabled urethane-doped citrate-based biodegradable elastomers.

The field of tissue engineering and drug delivery calls for new measurement tools, non-invasive real-time assays, and design methods for the next wave of innovations. Based on our recent progress in developing intrinsically biodegradable photoluminescent polymers (BPLPs) without conjugating organic dyes or quantum dots, in this paper, we developed a new type urethane-doped biodegradable photoluminescent polymers (UBPLPs) that could potentially serve as a new tool to respond the above call for innovations. Inherited from BPLPs, UBPLPs demonstrated strong inherent photoluminescence and excellent cytocompatibility in vitro. Crosslinked UBPLPs (CUBPLPs) showed soft, elastic, but strong mechanical properties with a tensile strength as high as 49.41 ± 6.17 MPa and a corresponding elongation at break of 334.87 ± 26.31%. Porous triphasic CUBPLP vascular scaffolds showed a burst pressure of 769.33 ± 70.88 mmHg and a suture retention strength of 1.79 ± 0.11 N. Stable but photoluminescent nanoparticles with average size of 103 nm were also obtained by nanoprecipitation. High loading efficiency (91.84%) and sustained release of 5-fluorouracil (up to 120 h) were achieved from UBPLP nanoparticles. With a quantum yield as high as 38.65%, both triphasic scaffold and nanoparticle solutions could be non-invasively detected in vivo. UBPLPs represent an innovation in fluorescent biomaterial design and may offer great potential in advancing the field of tissue engineering and drug delivery where bioimaging has gained increasing interest.

Sequential identification of model parameters by derivative double two-dimensional correlation spectroscopy and calibration-free approach for chemical reaction systems.

A sequential identification approach by two-dimensional (2D) correlation analysis for the identification of a chemical reaction model, activation, and thermodynamic parameters is presented in this paper. The identification task is decomposed into a sequence of subproblems. The first step is the construction of a reaction model with the suggested information by model-free 2D correlation analysis using a novel technique called derivative double 2D correlation spectroscopy (DD2DCOS), which enables one to analyze intensities with nonlinear behavior and overlapped bands. The second step is a model-based 2D correlation analysis where the activation and thermodynamic parameters are estimated by an indirect implicit calibration or a calibration-free approach. In this way, a minimization process for the spectral information by sample-sample 2D correlation spectroscopy and kinetic hard modeling (using ordinary differential equations) of the chemical reaction model is carried out. The sequential identification by 2D correlation analysis is illustrated with reference to the isomeric structure of diphenylurethane synthesized from phenylisocyanate and phenol. The reaction was investigated by FT-IR spectroscopy. The activation and thermodynamic parameters of the isomeric structures of diphenylurethane linked through a hydrogen bonding equilibrium were studied by means of an integration of model-free and model-based 2D correlation analysis called a sequential identification approach. The study determined the enthalpy (ΔH = 15.25 kJ/mol) and entropy (TΔS = 13.20 kJ/mol) of C═O···H hydrogen bonding of diphenylurethane through direct calculation from the differences in the kinetic parameters (δΔ(‡)H, -TδΔ(‡)S) at equilibrium in the chemical reaction system.

Sustained delivery of paclitaxel using thermogelling poly(PEG/PPG/PCL urethane)s for enhanced toxicity against cancer cells.

A multiblock poly(ether ester urethane)s comprising poly(ε-caprolactone), poly(ethylene glycol), and poly(propylene glycol) segments was synthesized. The aqueous copolymer solution exhibited thermogelling behavior at a critical gelation concentration of 3 wt %. The chemical structure and molecular characteristic of the copolymers were studied by gel permeation chromatography, NMR, and fourier transform infrared spectroscopy (FTIR). Rheological characterizations on the thermogel were carried out. Drug release studies using paclitaxel showed that sustained drug release of more than 2 weeks can be achieved with this system. The paclitaxel-loaded gels showed efficiency in the control of the growth of HeLa cells when compared with the paclitaxel dissolved in solution or paclitaxel encapsulated in Pluronics F127. The results demonstrated that the copolymers could be potentially used in chemotherapeutic applications.

Substituent effects on P2-cyclopentyltetrahydrofuranyl urethanes: design, synthesis, and X-ray studies of potent HIV-1 protease inhibitors.

The design, synthesis, and biological evaluation of novel C3-substituted cyclopentyltetrahydrofuranyl (Cp-THF)-derived HIV-1 protease inhibitors are described. Various C3-functional groups on the Cp-THF ligand were investigated in order to maximize the ligand-binding site interactions in the flap region of the protease. Inhibitors 3c and 3d have displayed the most potent enzyme inhibitory and antiviral activity. Both inhibitors have maintained impressive activity against a panel of multidrug resistant HIV-1 variants. A high-resolution X-ray crystal structure of 3c-bound HIV-1 protease revealed a number of important molecular insights into the ligand-binding site interactions.

Vinyl carbonates, vinyl carbamates, and related monomers: synthesis, polymerization, and application.

Although acrylates and methacrylates are the state-of-the-art monomers for protective and decorative coatings, skin and inhalation irritancy and potential cytotoxicity of monomers present serious health hazards. Monomers like vinyl carbonates or vinyl carbamates can overcome these problems with their generally lower cytotoxicity and yet similar photoreactivity to (meth)acrylates. The reviewed classes of monomers have not attracted industry's attention until now due to expensive synthetic methods though recently developed affordable routes offer prospect for their increasing use (88 references).

A new generation of sodium chloride porogen for tissue engineering.

Porogen leaching is a widely used and simple technique for the creation of porous scaffolds in tissue engineering. Sodium chloride (NaCl) is the most commonly used porogen, but the current grinding and sieving methods generate salt particles with huge size variations and cannot generate porogens in the submicron size range. We have developed a facile method based on the principles of crystallization to precisely control salt crystal sizes down to a few microns within a narrow size distribution. The resulting NaCl crystal size could be controlled through the solution concentration, crystallization temperature, and crystallization time. A reduction in solution temperature, longer crystallization times, and an increase in salt concentration resulted in an increase in NaCl crystal sizes due to the lowered solubility of the salt solution. The nucleation and crystallization technique provides superior control over the resulting NaCl size distribution (13.78 ± 1.18 µm), whereas the traditional grinding and sieving methods produced NaCl porogens 13.89 ± 12.49 µm in size. The resulting NaCl porogens were used to fabricate scaffolds with increased interconnectivity, porous microchanneled scaffolds, and multiphasic vascular grafts. This new generation of salt porogen provides great freedom in designing versatile scaffolds for various tissue-engineering applications.

Biodegradable pH/temperature-sensitive oligo(ß-amino ester urethane) hydrogels for controlled release of doxorubicin.

An injectable biodegradable pH/temperature-sensitive oligo(ß-amino ester urethane) (OAEU) was synthesized. The OAEU was synthesized by addition polymerization between the isocyanate groups of 1,6-diisocyanato hexamethylene and the hydroxyl groups of a synthesized monomer piperazine dihydroxyl amino ester (monomer PDE) in chloroform in the presence of dibutyltin dilaurate as a catalyst. The synthesized OAEU was characterized by (1)H NMR spectroscopy, Fourier transform infrared spectroscopy and gel permeation chromatography. The aqueous solutions of OAEU showed a sol-to-gel-to-sol phase transition as a function of temperature and pH. The gel window covered the physiological conditions (37°C, pH 7.4) and could be controlled by changing the OAEU concentration. After a subcutaneous injection of the OAEU solution into Sprague-Dawley rats, a gel formed rapidly in situ and remained in the body for more than 2 weeks. The in vitro cytotoxicity test and in vitro degradation showed that the OAEU hydrogel was non-cytotoxic and biodegradable. The in vitro release of doxorubicin from this OAEU hydrogel was sustained for more than 10 days. This injectable biodegradable pH/temperature-sensitive OAEU hydrogel is a potential candidate as a drug/protein carrier and in biomedical applications.

Amorphous phase-segregated copoly(ether)esterurethane thermoset networks with oligo(propylene glycol) and oligo[(rac-lactide)-co-glycolide] segments: synthesis and characterization.

Completely amorphous copoly(ether)ester networks based on oligo(propylene glycol) and oligo[(rac-dilactide)-co-glycolide] segments were synthesized by crosslinking star-shaped hydroxyl-telechelic cooligomers using an aliphatic low-molecular weight diisocyanate. Two different network architectures were applied exhibiting differences in the phase-separation behavior. For networks from oligo(propylene glycol)-block-oligo[(rac-lactide)-co-glycolide] triols (G(3)OPG-bl-OLG) only one glass transition was obtained. However, networks from a mixture of oligo(propylene glycol) triols (G(3)OPG) and oligo[(rac-lactide)-co-glycolide] tetrols (P(4)OLG) with a ratio of components in a certain range show two glass transition temperatures (T (g)) being attributed to two segregated amorphous phases. In this way a wide spectrum of mechanical properties can be realized and adjusted to the requirements of a specific application.

Chiral Brønsted acid-catalyzed enantioselective three-component Povarov reaction.

The three-component Povarov reaction of aldehydes (2), anilines (3), and benzyl N-vinylcarbamate 4 in the presence of 0.1 equiv of chiral phosphoric acid 5 afforded cis-2,4-disubstituted tetrahydroquinolines (1) in good yields and excellent enantiomeric excesses. The shortest synthesis of torcetrapib reported to date, which features this key three-component reaction, is documented.