The role of the deep cervical extensor muscles in multi-directional isometric neck strength.

Clinical management of whiplash-associated disorders is challenging and often unsuccessful, with over a third of whiplash injuries progressing to chronic neck pain. Previous imaging studies have identified muscle fat infiltration, indicative of muscle weakness, in the deep cervical extensor muscles (multifidus and semispinalis cervicis). Yet, kinematic and muscle redundancy prevent the direct assessment of individual neck muscle strength, making it difficult to determine the role of these muscles in motor dysfunction. The purpose of this study was to determine the effects of deep cervical extensor muscle weakness on multi-directional neck strength and muscle activation patterns. Maximum isometric forces and associated muscle activation patterns were computed in 25 test directions using a 3-joint, 24-muscle musculoskeletal model of the head and neck. The computational approach accounts for differential torques about the upper and lower cervical spine. To facilitate clinical translation, the test directions were selected based on locations where resistance could realistically be applied to the head during clinical strength assessments. Simulation results reveal that the deep cervical extensor muscles are active and contribute to neck strength in directions with an extension component. Weakness of this muscle group leads to complex compensatory muscle activation patterns characterized primarily by increased activation of the superficial extensors and deep upper cervical flexors, and decreased activation of the deep upper cervical extensors. These results provide a biomechanistic explanation for movement dysfunction that can be used to develop targeted diagnostics and treatments for chronic neck pain in whiplash-associated disorders.

Effect of smartphone use on cervical spine stability.

Using a smartphone often involves a sustained head-forward tilt posture, which may deteriorate the mechanism of muscle reaction efficiency or reduce the stiffness of connective tissues of the cervical spine. These changes in muscular and connective tissues can impair cervical spine stability and contribute to developing neck pain symptoms. In this experiment, change in the cervical spine stability associated with a sustained smartphone use posture was evaluated by quantifying the effective stiffness and the reflexive responses of the head to sudden perturbations. Seventeen young smartphone users maintained their heads tilted forward approximately 30° for 30 min while watching videos on their smartphones in sitting. Data show that the measures of cervical spine stability did not change significantly after the smartphone use task despite developing mild to moderate neck and upper body discomfort symptoms. Study findings imply that keeping the head tilt posture for 30 min for smartphone use did not significantly alter spinal stability, rejecting its association with neck discomfort.

Are owls technically capable of making a full head turn?

The three-dimensional configuration of the neck that produces extreme head turn in owls was studied using the Joint Coordinate System. The limits of planar axial rotation (AR), lateral, and sagittal bending in each vertebral joint were measured. They are not extraordinary among birds, except probably for the extended ability for AR. The vertebral joint angles involved in the 360° head turn do not generally exceed the limits of planar mobility. Rotation in one plane does not expand the range of motion in the other, with one probable exception being extended dorsal bending in the middle of the neck. Therefore, the extreme 360° head turn can be presented as a simple combination of the three planar motions in the neck joints. Surprisingly, certain joints are always laterally bent or axially rotated to the opposite side than the head was turned. This allows keeping the anterior part of the neck parallel to the thoracic spine, which probably helps preserve the ability for peering head motions throughout the full head turn. The potential ability of one-joint muscles of the owl neck, the mm. intertransversarii, to ensure the 360° head turn was addressed. It was shown that the 360° head turn does not require these muscles to shorten beyond the known contraction limit of striated vertebrate muscles. Shortening by 50% or less is enough for the mm. intertransversarii in the middle neck region for the 360° head turn. This study has broad implications for further research on vertebral mobility and function in a variety of tetrapods, providing a new method for CT scan-based measurement of intervertebral angles.

Assessment of the stiffness of the upper trapezius muscle in a group of asymptomatic people with cervical spine rotation asymmetry.

This study investigated the relationship between the stiffness of the upper trapezius muscle and the range of rotational movement of the cervical spine. A total of 60 right-handed asymptomatic students participated in the study. Participants (N = 22) characterised by asymmetry in rotational movements were selected for the experimental group. A difference of ≥10° between right and left rotation of the cervical spine was considered asymmetrical. The control group (N = 38) included participants whose rotation difference was < 10°. Belonging to the experimental or control group did not significantly differentiate trapezius muscle stiffness. The rotation side differentiated the stiffness of the right and left trapezius muscles only in the group of people with rotational movement asymmetry. There were high correlation coefficients between right cervical rotation and the stiffness of the muscle on the right side, and between rotation to the left and the stiffness of the muscle on the left side. There is a relationship between the stiffness of the right and left upper trapezius muscles and the range of right and left rotational motion of the cervical spine. Stiffness of the upper trapezius correlates more strongly with rotation to the side on which the muscle lies than to the opposite side. Increased stiffness of the upper trapezius muscle on the side of limited cervical spine rotation is likely to be determined by the muscle fibre stretching mechanism.

Biomechanical analysis of cervical spine (C2-C7) at different flexed postures.

Musculoskeletal diseases are often related with postural changes in the neck region that can be caused by prolonged cervical flexion. This is one of the contributing factors. When determining the prevalence, causes, and related risks of neck discomfort, having a solid understanding of the biomechanics of the cervical spine (C1-C7) is absolutely necessary. The objective of this study is to make predictions regarding the intervertebral disc (IVD) stress values across C2-C7 IVD, the ligament stress, and the variation at 0°, 15°, 30°, 45°, and 60° of cervical neck angle using finite element analysis (FEA). In order to evaluate the mechanical properties of the cervical spine (particularly, C2-C7), this investigation makes use of computed tomography (CT) scans to develop a three-dimensional FEA model of the cervical spine. A preload of 50 N compression force was applied at the apex of the C2 vertebra, and all degrees of freedom below the C7 level were constrained. The primary objective of this investigation is to assess the distribution of von Mises stress within the IVDs and ligaments spanning C2-C7 at various flexion angles: 0°, 15°, 30°, 45°, and 60°, utilizing FEA. The outcomes derived from this analysis were subsequently compared to previously published experimental and FEA data to validate the model's ability to replicate the physiological motion of the cervical spine across different flexion angles.

Head tilt as a clinical sign of cervical spinal or paraspinal disease in dogs: 15 cases (2000-2021).

OBJECTIVES: To characterise head tilt as a rare clinical sign of cervical spinal or paraspinal disease in dogs. MATERIALS AND METHODS: Retrospective single-centre case-series study of dogs with head tilt and cervical spinal or paraspinal disease in the absence of intracranial abnormalities. Descriptive statistics were used. RESULTS: Fifteen dogs met the inclusion criteria of this study. Median age at onset was 6 years (range 2.5 to 12 years). Onset of neurological signs was mainly chronic (9/15, 60%). Most common presenting complaints included head tilt (9/15, 60%) and cervical hyperaesthesia (8/15, 53%). Most common neurological findings included head tilt (15/15, 100%), generalised proprioceptive ataxia and tetraparesis (6/15, 40%) and cervical hyperaesthesia (8/15, 53%). Diagnoses included post-operative complication of C2 spinal nerve root mass removal (2/15, 13%), C3-C4 intervertebral disc extrusion (2/15, 13%), cervical paraspinal myositis (2/15, 13%) and one of each: C2 vertebral malformation, C2 spinal nerve root mass, C1-C2 meningioma, C2 vertebral fracture, C4-C5 intervertebral disc extrusion, C4 vertebral body mass, C5-C7 osseous-associated cervical spondylomyelopathy, and concurrent C5-C6 and C6-C7 intervertebral disc protrusions. Two dogs were euthanased shortly after diagnosis and two of 15 were dogs lost to follow-up. No post-mortem examination was performed for these cases. For the 11 of 15 remaining dogs, head tilt resolved in eight of 15 (53%) dogs after treatment of the underlying condition and in three of 15 (20%) dogs, it remained static. CLINICAL SIGNIFICANCE: Head tilt can be a rare clinical sign of cervical spinal or paraspinal disease in dogs.

The move-C cervical artificial disc can restore intact range of motion and 3-D kinematics.

BACKGROUND CONTEXT: In contrast to cervical discectomy and fusion, total disc replacement (TDR) aims at preserving the motion at the treated vertebral level. Spinal motion is commonly evaluated with the range of motion (ROM). However, more qualitative information about cervical kinematics before and after TDR is still lacking. PURPOSE: The aim of this in vitro study was to investigate the influence of cervical TDR on ROM, instantaneous centers of rotation (ICR) and three-dimensional helical axes. STUDY DESIGN: An in vitro study with human spine specimens under pure moment loading was conducted to evaluate the kinematics of the intact cervical spine and compare it to cervical TDR. METHODS: Six fresh frozen human cervical specimens (C4-5, median age 28 years, range 19-47 years, two female and four male) were biomechanically characterized in the intact state and after implantation of a cervical disc prosthesis (MOVE-C, NGMedical, Germany). To mimic in vivo conditions regarding temperature and humidity, water steam was used to create a warm and humid test environment with 37°C. Each specimen was quasistatically loaded with pure moments up to ±2.5 Nm in flexion/extension (FE), lateral bending (LB) and axial rotation (AR) in a universal spine tester for 3.5 cycles at 1 °/s. For each third cycle of motion the ROM was evaluated and an established method was used to determine the helical axis and COR and to project them into three planar X-rays. Statistical analysis was conducted using a Friedman-test and post hoc correction with Dunn-Bonferroni-tests (p<.05). RESULTS: After TDR, total ROM was increased in FE from 19.1° to 20.1°, decreased in LB from 14.6° to 12.6° and decreased in AR from 17.7° to 15.5°. No statistical differences between the primary ROM in the intact condition and ROM after TDR were detected. Coupled rotation between LB and AR were also maintained. The position and orientation of the helical axes after cervical TDR was in good agreement with the results of the intact specimens in all three motion directions. The ICR in FE and AR before and after TDR closely matched, while in LB the ICR after TDR were more caudal. The intact in vitro kinematics we found also resembled in vivo results of healthy individuals. CONCLUSION: The results of this in vitro study highlight the potential of artificial cervical disc implants to replicate the quantity as well as the quality of motion of the intact cervical spine. CLINICAL SIGNIFICANCE: Physiological motion preservation was a driving factor in the development of cervical TDR. Our results demonstrate the potential of cervical TDR to replicate in vivo kinematics in all three motion directions.

Effect of muscle pre-tension and pre-impact neck posture on the kinematic response of the cervical spine in simulated low-speed rear impacts.

Computational human body models (HBMs) can identify potential injury pathways not easily accessible through experimental studies, such as whiplash induced injuries. However, previous computational studies investigating neck response to simulated impact conditions have neglected the effect of pre-impact neck posture and muscle pre-tension on the intervertebral kinematics and tissue-level response. The purpose of the present study was addressing this knowledge gap using a detailed neck model subjected to simulated low-acceleration rear impact conditions, towards improved intervertebral kinematics and soft tissue response for injury assessment. An improved muscle path implementation in the model enabled the modeling of muscle pre-tension using experimental muscle pre-stretch data determined from previous cadaver studies. Cadaveric neck impact tests and human volunteer tests with the corresponding cervical spine posture were simulated using a detailed neck model with the reported boundary conditions and no muscle activation. Computed intervertebral kinematics of the model with pre-tension achieved, for the first time, the S-shape behavior of the neck observed in low severity rear impacts of both cadaver and volunteer studies. The maximum first principal strain in the muscles for the model with pre-tension was 27% higher than that without pre-tension. Although, the pre-impact neck posture was updated to match the average posture reported in the experimental tests, the change in posture was generally small with only small changes in vertebral kinematics and muscle strain. This study provides a method to incorporate muscle pre-tension in HBM and quantifies the importance of pre-tension in calculating tissue-level distractions.

Assessment of axial rotation movement in cervical dystonia using cone-beam computed tomography.

BACKGROUND: Cervical dystonia is a neurological disorder characterized by involuntary muscle contractions and abnormal postures of the head and neck. Botulinum neurotoxin injection is the first-line treatment. Imaging determination of the cervical segments involved (lower or upper according to the torticollis-torticaput [COL-CAP] Classification) is an aid in determining the muscles to be injected. We aimed to clarify the impact of dystonia on posture and rotational movement of cervical vertebrae in the transverse plane. METHODS: A comparative study was conducted in a movement disorders department. Ten people with cervical dystonia and 10 matched healthy subjects (without cervical dystonia) were recruited. 3-D images of posture and cervical range of motion in axial rotation in the sitting position were recorded by using a cone-beam CT scanner. Range of rotational motion of the upper cervical spine from the occipital bone to fourth cervical vertebra was measured and compared between the two groups. FINDINGS: The head posture analysis showed that the total cervical spine position was more significantly distant from the neutral position for people with dystonia than healthy subjects (p = 0.007). The rotational range of motion of the cervical spine was significantly lower in cervical dystonia participants than in healthy subjects for the total (p = 0.026) and for upper cervical spine (p = 0.004). INTERPRETATION: We demonstrated, by means of cone-beam CT, that the disorganization of movements due to cervical dystonia affected the upper cervical spine and mostly the atlantoaxial joint. The involvement of rotator muscles at this cervical level should be considered more in treatments.

The efficacy of sling exercise combined with extracorporeal shock wave on office workers with chronic neck pain.

This study aimed to investigate the effect of extracorporeal shockwave therapy on the anterior surface line of the fascia meridian, including the oblique muscle, combined with sling exercise, on the stability of the spine in the neck disability index (NDI), neck joint range of motion (ROM), craniovertebral angle, neck alignment, and posture control. A total of 20 office workers with chronic neck pain were randomly assigned to an experimental group that combined extracorporeal shock wave therapy and sling exercise (n = 10) and a control group (CG) consisting of sling exercise (n = 10) performed twice weekly for 4 weeks. All subjects were evaluated using the NDI, ROM, neck alignment, and spine stability tests. Following the intervention, there were significant differences in the For example, NDI, craniovertebral angle, Cobb's angle, Centaur data, and ROM. Except for Cobb's angle and Centaur data (-90 degrees), all variables showed significant differences in the CG. Comparing changes before and after the intervention, The For example, showed significantly more significant changes in all variables than the CG. The combination of extracorporeal shockwave therapy and sling exercises improved NDI, ROM, and neck and spine alignment in office workers with chronic neck pain more effectively than the sling exercise alone. This study could be recommended as a new approach to enable individuals with chronic neck pain to perform better.

Evaluation of surface electromyography of selected neck muscles during the whiplash mechanism in aware and unaware conditions due to safe punching in kickboxing.

BACKGROUND: Kickboxing is considered as a combat sport in progress, in which injuries are frequent and significant, and close injury monitoring is highly recommended. Sports injuries to the head and neck are estimated to cause 70% deaths and 20% permanent disabilities although they are much less common than those to the limbs. Whiplash mechanism involves the rapid extension (opening) and flexion (bending) of neck. The purpose of the current study was to investigate the electromyographic activity of selected muscles in the whiplash mechanism in aware and unaware conditions of the safe punching in kickboxing so that we can design special exercises. METHOD: In the present study, 24 male kickboxing athletes aged 18-40 years were selected based on a purposive sampling method. The surface electromyography (EMG) signals of muscles were recorded with and without awareness of safe punching by using a nine-channel wireless EMG device. Additionally, a nine-channel 3D inertial measurement unit (IMU, wireless,) was utilized to determine the acceleration, kinematics, and angular velocity of the subjects' head. The statistical dependent t-test was applied to compare the EMG activity of each muscle, as well as its participation ratio. RESULTS: The results of statistical analysis represented a significant increase in the EMG activity of sternocleidomastoid (p = 0.001), upper trapezius (p = 0.001) and cervical erector spinae muscles (p = 0.001), as well as the neck extension and flexion angles between the athletes aware (open eyes) and unaware (closed eyes) of the safe punching. CONCLUSION: In this study, the EMG activity of the sternocleidomastoid, upper trapezius, and cervical erector spine muscles in the aware condition was significantly different from the activity under unaware condition. In fact, the intended muscles exhibited significantly different behaviors in preventing extension and flexion in the two conditions.

Morphologic aspects of the cervical (C3-C7) annular epiphysis: a skeletal study.

BACKGROUND CONTEXT: The annular epiphysis (AE) is a peripheral ring of cortical bone that forms a secondary ossification center in the superior and inferior surfaces of vertebral bodies (VBs). The AE is the last ossification site in the skeleton, typically forming at about the 25th year of life. The AE functions jointly with vertebral endplates to anchor the intervertebral discs to the VBs. PURPOSE: To establish accurate data on the sizes of the AE of the cervical spine (C3-C7); to compare the ratios between areas and the ratios of the AE to VBs; to compare the ratios between the superior and inferior VB surface areas; and to compare AE lengths between the posterior and anterior midsagittal areas. STUDY DESIGN: Measurement of 424 cervical spines (C3-C7) obtained from the skeletal collection of the Natural History Museum, Cleveland, Ohio (USA). METHODS: The sample was characterized by sex, age, and ethnic origin. The following measurements were recorded for each vertebra: (1) the surface area of the VBs and the AE, (2) the midsagittal anterior and posterior length of the AE, (3) the ratios between the AE and VB surface areas, and (4) the ratios between the superior and inferior disc surface areas. RESULTS: The study revealed that the AE and VBs in men were larger than in women. With age, the AE and VBs became larger; the ratio between the AE and VB surface was approximately 0.5 throughout the middle to lower cervical spine. The ratio of superior to inferior VBs was approximately 0.8. We found no differences between African Americans versus European Americans or between the anterior versus the posterior midsagittal length of the AE of the superior and inferior VBs. CONCLUSIONS: The ratios between the superior and inferior VBs are ≥0.8, and the ratio is the same for the entire middle to lower spine. Thus, the ratio between the superior and inferior VBs to the AE is ≥ 0.5. Men had larger AEs and VBs than women did, with both VBs and AEs becoming larger with age. Knowing these relationships are important so that orthopedic surgeons can best correct these issues in young patients (<25 years old) during spine surgery. The data reported here provide, for the first time, all the relevant sizes of the AE and VB. In future studies, AEs and VBs of living patients can be measured with computed tomography. CLINICAL SIGNIFICANCE: The ER location and function are clinically significant showing any changes during life that might lead to clinical issues related to intervertebral discs such as intervertebral disc asymmetry, disc herniation, nerve pressure, cervical osteophytes and neck pain.

Biomechanical analysis of a single-level customized cage screw fixation for anterior cervical discectomy and fusion in the cervical spine: anin-silicostudy.

The usual surgical choice of customized cage fixation is anterior cervical discectomy and fusion (ACDF) for cervical spondylosis with disc herniation. The safe and successful cage fixation for ACDF surgery benefits patients with cervical disc degenerative disease by easing their discomfort and regaining function. The cage prevents mobility between the vertebrae by using cage fixation to anchor the neighbouring vertebrae. The goal of the current study is to develop a customized cage-screw implant for single-level cage fixation at C4-C5 level of the cervical spine (C2-C7). The Finite Element Analysis (FEA) is performed for the intact and implanted cervical spine and analysed the flexibility, stress of the implant and implant adjacent bone during three physiological loading conditions being analysed. Lower surface of the C7 vertebrae is fixed and 50 N compressive force with 1 Nm moment are applied on the C2 vertebrae for simulated lateral bending, axial rotation and flexion-extension. The flexibility is decreased at single level of fixation (C4-C5 level) by 64% to 86%, as compared to natural cervical spine. The flexibility is increased 3% to 17% at the nearest levels of fixation. The maximum Von Mises stress in PEEK cage varies from 24 to 59 MPa and for Ti-6Al-4V screw the stress varies from 84 MPa to 121 MPa which are far below the yield stress of PEEK (95 MPa) and Ti-6Al-4V (750 MPa).

UBC Neck C4-C5: An Anatomically and Biomechanically Accurate Surrogate C4-C5 Functional Spinal Unit.

Millions of people worldwide suffer from spinal cord injuries (SCIs) and traumatic brain injuries (TBIs) annually. Safety devices meant to protect against SCIs and TBIs, such as helmets, airbags, seat belts, and compliant floors are often evaluated with the use of anthropometric test devices (ATD s); however, there are currently no neck surrogates appropriate for the multiplane loading that often occurs in real-world scenarios leading to injury. As such, our objective in this study was to design and create an anatomically correct functional spinal unit (FSU) that produces a repeatable and biofidelic response to lateral bending, axial rotation, and quasistatic flexion-extension motion. This is a critical step in developing a biofidelic omnidirectional surrogate that can be used in future evaluations of safety devices in transportation, occupational, and sports settings. To create a biofidelic C4-C5 FSU, anatomically accurate C4 and C5 vertebrae were designed and manufactured using a 3D printer using geometry derived from the CT scans of a healthy 31-year-old male. Potential intervertebral disc and ligament surrogate materials were tested in compression and tension, respectively, to select representative materials for the surrogate intervertebral disc and cervical ligaments. The C4-C5 FSU was assembled and tested repeatedly in quasistatic flexion-extension, axial rotation, and lateral bending. Kinematic results were captured and compared to previously published cadaver data. The surrogate disc showed excellent Biofidelity (ISO/TR 9790) in compression, and the surrogate ligaments were within 25 N/mm of linear cadaveric stiffness ranges. The assembled FSU named UBC Neck C4-C5 showed good biofidelity under quasistatic axial rotation, lateral bending, flexion-extension, and coupled motion (ISO/TR 9790). However, the instantaneous centre of rotation was not similar to ex vivo or in vivo published studies. The UBC Neck C4-C5 FSU resulted in good biofidelity ratings and will inform future construction of a full surrogate neck to be used in the testing of head and neck safety equipment.

Effect of muscle activation on dynamic responses of neck of pilot during emergency ejection: a finite element study.

To determine the effect of muscle activation on the dynamic responses of the neck of a pilot during simulated emergency ejections. A complete finite element model of the pilot's head and neck was developed and dynamically validated. Three muscle activation curves were designed to simulate different activation times and levels of muscles during pilot ejection: A is the unconscious activation curve of the neck muscles, B is the pre-activation curve, and C is the continuous activation curve. The acceleration-time curves obtained during ejection were applied to the model, and the influence of the muscles on the dynamic responses of the neck was investigated by analyzing both angles of rotation of the neck segments and disc stresses. Muscle pre-activation reduced fluctuations in the angle of rotation in each phase of the neck. Continuous muscle activation caused a 20% increase in the angle of rotation compared to pre-activation. Moreover, it resulted in a 35% increase in the load on the intervertebral disc. The maximum stress on the disc occurred in the C4-C5 phase. Continuous muscle activation increased both the axial load on the neck and the posterior extension angle of rotation of the neck. Muscle pre-activation during emergency ejection has a protective effect on the neck. However, continuous muscle activation increases the axial load and rotation angle of the neck. A complete finite element model of the pilot's head and neck was established and three neck muscle activation curves were designed to investigate the effects of muscle activation time and level on the dynamic response of the pilot's neck during ejection. This increased insights into the protection mechanism of neck muscles on the axial impact injury of the pilot's head and neck.

The relationship between compensatory hyperplasia of the myodural bridge complex and reduced compliance of the various structures within the cranio-cervical junction.

The myodural bridge complex (MDBC) is described as a functional anatomic structure that involves the dense connective tissue fibers, muscles, and ligaments in the suboccipital region. It has recently been proposed that the MDBC can influence cerebrospinal fluid (CSF) circulation. In the present study, bleomycin (BLM), a type of antibiotic that is poisonous to cells, was injected into the posterior atlanto-occipital interspace (PAOiS) of rats to induce fibrous hyperplasia of structures in PAOiS. Sagittal sections of tissues obtained from the posterior-occipital region of the rats were stained utilizing the Masson Trichrome staining method. Semiquantitative analysis evidenced that the collagen volume fraction of collagen fibers of the MDBC, as well as the sum of the area of the spinal dura mater and the posterior atlanto-occipital membrane in the BLM group were significantly increased (p < .05) compared to that of the other groups. This finding illustrates that the MDBC fibers as well as other tissues in the PAOiS of rats in the BLM group developed fibrotic changes which reduced compliance of the spinal dura mater. Indeed, the sectional area of the rectus capitis dorsal minor muscle in the BLM group was measured to be increased. These changes may further restrict CSF flow. The present research provides support for the recent hypothesis proposed by Labuda et al. concerning the pathophysiology observed in symptomatic adult Chiari malformation Type I patients, that there exists a relationship between the altered compliance of the anatomic structures within the craniocervical region and the resultant compensatory hyperplasia of the MDBC.

Changes of adjacent segment biomechanics after anterior cervical interbody fusion with different profile design plate: single- versus double-level.

Low-profile angle-stable spacer Zero-P is claimed to reduce the morbidity associated with traditional plate and cage construct (PCC). Both Zero-P and PCC could achieve comparable mid- and long-term clinical and radiological outcomes in anterior cervical discectomy and fusion (ACDF). It is not clear whether Zero-P can reduce the incidence of adjacent segment degeneration (ASD), especially in multi-segmental fusion. This study aimed to test the effect of fusion level with Zero-P versus with PCC on adjacent-segment biomechanics in ACDF. A three-dimensional finite element (FE) model of an intact C2-T1 segment was built and validated. Six single- or double-level instrumented conditions were modeled from this intact FE model using Zero-P or the standard PCC. The biomechanical responses of adjacent segments at the cephalad and caudal levels of the operation level were assessed in terms of range of motion (ROM), stresses in the endplate and disc, loads in the facets. When comparing the increase of adjacent-segment motion in single-level PCC fusion versus Zero-P fusion, a significantly larger increase was found in double-level fusion condition. The fold changes of PCC versus Zero-P of intradiscal and endplate stress, and facet load at adjacent levels in the double-level fusion spine were significantly larger than that in the single-level fusion spine during the sagittal, the transverse, and the frontal plane motion. The increased value of biomechanical features was greater at above segment than that at below. The fold changes of PCC versus Zero-P at adjacent segment were most notable in flexion and extension movement. Low-profile device could decrease adjacent segment biomechanical burden compared to traditional PCC in ACDF, especially in double-level surgery. Zero-P could be a good alternative for traditional PCC in ACDF. Further clinical/in vivo studies will be necessary to explore the approaches selected for this study is warranted.

Kinematics of the Cervical Spine Under Healthy and Degenerative Conditions: A Systematic Review.

Knowledge of spinal kinematics is essential for the diagnosis and management of spinal diseases. Distinguishing between physiological and pathological motion patterns can help diagnose these diseases, plan surgical interventions and improve relevant tools and software. During the last decades, numerous studies based on diverse methodologies attempted to elucidate spinal mobility in different planes of motion. The authors aimed to summarize and compare the evidence about cervical spine kinematics under healthy and degenerative conditions. This includes an illustrated description of the spectrum of physiological cervical spine kinematics, followed by a comparable presentation of kinematics of the degenerative cervical spine. Data was obtained through a systematic MEDLINE search including studies on angular/translational segmental motion contribution, range of motion, coupling and center of rotation. As far as the degenerative conditions are concerned, kinematic data regarding disc degeneration and spondylolisthesis were available. Although the majority of the studies identified repeating motion patterns for most motion planes, discrepancies associated with limited sample sizes and different imaging techniques and/or spine configurations, were noted. Among healthy/asymptomatic individuals, flexion extension (FE) and lateral bending (LB) are mainly facilitated by the subaxial cervical spine. C4-C5 and C5-C6 were the major FE contributors in the reported studies, exceeding the motion contribution of sub-adjacent segments. Axial rotation (AR) greatly depends on C1-C2. FE range of motion (ROM) is distributed between the atlantoaxial and subaxial segments, while AR ROM stems mainly from the former and LB ROM from the latter. In coupled motion rotation is quantitatively predominant over translation. Motion migrates caudally from C1-C2 and the center of rotation (COR) translocates anteriorly and superiorly for each successive subaxial segment. In degenerative settings, concurrent or subsequent lesions render the association between diseases and mobility alterations challenging. The affected segments seem to maintain translational and angular motion in early and moderate degeneration. However, the progression of degeneration restrains mobility, which seems to be maintained or compensated by adjacent non-affected segments. While the kinematics of the healthy cervical spine have been addressed by multiple studies, the entire nosological and kinematic spectrum of cervical spine degeneration is partially addressed. Large-scale in vivo studies can complement the existing evidence, cover the gaps and pave the way to technological and clinical breakthroughs.

Mechanisms of cervical spine injury and coupling response with initial head rotated posture - implications for AIS coding.

Objective: This objective of the present study is to describe the responses of the human head-cervical spine in terms of injuries, injury mechanisms, injury scoring, and quantify multiplanar loads.Methods: Pretest radiographs of pre-screened five human cadaver head-neck complexes were obtained. Cranium contents and sectioned the structure rostral to skull base. The caudal end was embedded, and cervical-thoracic disc was unconstrained condition. The loading was applied as a torque about the occipital condyle joint. The head and T1 were angulated 30 degrees and 25 degrees. Peak forces and moments at the occipital condyles were recorded using a six-axis load cell. After testing, x-rays and CT images were obtained. Injuries were scored using the Abbreviated Injury Scale, AIS 2015 version.Results: The mean age, stature, total body mass, body mass index of the five subjects were as follows: 63 years, 1.7 m, 78.0 kg, and 28.1 kg/m2. The mean peak axial force and coronal, sagittal, and axial bending moments were: 754 N, and 36.8 Nm, 14.8 Nm, and 9.5 Nm. All but one specimen sustained injury. Injuries were scored at the AIS 2 level. Two specimens sustained left anterior inferior lateral mass fractures of the atlas. While the transverse atlantal ligament was intact, some capsular ligament involvement was observed. In the other two specimens, although the same injury was noted, joint diastasis of the atlas-axis joint was identified.Conclusions: Using a PMHS model, the present study described the biomechanics of the initially head rotated head-neck complex under lateral bending in terms of injuries, injury mechanisms, quantification of the multiplanar loads at the occipital condyles, and underscored potential injury scoring issues for occupant protection. The issue of diastasis is not addressed in the AIS 2015 version. While this may not always result in immediate instability and require surgical intervention, it may be necessary to revisit this issue. Upper cervical fractures with diastasis and or transverse atlantal ligament involvement may be potential injury scoring factors for AIS consideration.

Intervertebral kinematics during neck motion 6.5 years after fusion and artificial disc replacement.

BACKGROUND: Arthroplasty with artificial disc replacement for surgical treatment of cervical spine degeneration was introduced with the notion that motion-preserving approaches would prevent development of adjacent segment disease. Though clinical outcomes favor arthroplasty over the commonly used anterior cervical discectomy with fusion approach, clinical studies confirming the biomechanical basis of these results are lacking. The aim of this study was to compare intervertebral kinematics between arthroplasty and fusion patients 6.5 years post-surgery during physiological motion of the neck. METHODS: Using a biplane dynamic X-ray system, computed tomography imaging and model based tracking algorithms, three dimensional intervertebral kinematics were measured during neck axial rotation and extension in 14 patients treated for cervical radiculopathy with fusion (n = 8) or arthroplasty (n = 6). The measurements were performed at 2-year (baseline) and 6.5 year post-surgical time points, with the main interest being in the interaction between surgery types and time points. 3 translations and 3 rotations were investigated for the index (C5C6), and upper- (C4C5) and lower adjacent levels (C6C7). FINDINGS: Surgery-time interaction was significant for axial rotation (P < 0.04) and flexion-extension rotation (P < 0.005) in C4C5 during neck axial rotation, left-right translation (P < 0.04) in C5C6 and anterior-posterior translation in C6C7 (P < 0.04) during neck extension. In contrast with the expectations, axial rotation and flexion-extension decreased in C4C5 during neck rotation and anterior-posterior translation decreased in C6C7 during neck extension for fusion. INTERPRETATION: The findings do not support the notion that adjacent segment motion increases after fusion.