Metallohelix vectors for efficient gene delivery via cationic DNA nanoparticles.

The design of efficient and safe gene delivery vehicles remains a major challenge for the application of gene therapy. Of the many reported gene delivery systems, metal complexes with high affinity for nucleic acids are emerging as an attractive option. We have discovered that certain metallohelices-optically pure, self-assembling triple-stranded arrays of fully encapsulated Fe-act as nonviral DNA delivery vectors capable of mediating efficient gene transfection. They induce formation of globular DNA particles which protect the DNA from degradation by various restriction endonucleases, are of suitable size and electrostatic potential for efficient membrane transport and are successfully processed by cells. The activity is highly structure-dependent-compact and shorter metallohelix enantiomers are far less efficient than less compact and longer enantiomers.

Structure comparison of the chimeric AAV2.7m8 vector with parental AAV2.

The AAV2.7m8 vector is an engineered capsid with a 10-amino acid insertion in adeno-associated virus (AAV) surface variable region VIII (VR-VIII) resulting in the alteration of an antigenic region of AAV2 and the ability to efficiently transduce retina cells following intravitreal administration. Directed evolution and in vivo screening in the mouse retina isolated this vector. In the present study, we sought to identify the structural differences between a recombinant AAV2.7m8 (rAAV2.7m8) vector packaging a GFP genome and its parental serotype, AAV2, by cryo-electron microscopy (cryo-EM) and image reconstruction. The structures of rAAV2.7m8 and AAV2 were determined to 2.91 and 3.02 Å resolution, respectively. The rAAV2.7m8 amino acid side-chains for residues 219-745 (the last C-terminal residue) were interpretable in the density map with the exception of the 10 inserted amino acids. While observable in a low sigma threshold density, side-chains were only resolved at the base of the insertion, likely due to flexibility at the top of the loop. A comparison to parental AAV2 (ordered from residues 217-735) showed the structures to be similar, except at some side-chains that had different orientations and, in VR-VIII containing the 10 amino acid insertion. VR-VIII is part of an AAV2 antigenic epitope, and the difference is consistent with rAAV2.7m8's escape from a known AAV2 monoclonal antibody, C37-B. The observations provide valuable insight into the configuration of inserted surface peptides on the AAV capsid and structural differences to be leveraged for future AAV vector rational design, especially for retargeted tropism and antibody escape.

Atomic structure of a rationally engineered gene delivery vector, AAV2.5.

AAV2.5 represents the first structure-guided in-silico designed Adeno-associated virus (AAV) gene delivery vector. This engineered vector combined the receptor attachment properties of AAV serotype 2 (AAV2) with the muscle tropic properties of AAV1, and exhibited an antibody escape phenotype because of a modified antigenic epitope. To confirm the design, the structure of the vector was determined to a resolution of 2.78 Šusing cryo-electron microscopy and image reconstruction. The structure of the major viral protein (VP), VP3, was ordered from residue 219 to 736, as reported for other AAV structures, and the five AAV2.5 residues exchanged from AAV2 to AAV1, Q263A, T265 (insertion), N706A, V709A, and T717N, were readily interpretable. Significantly, the surface loops containing these residues adopt the AAV1 conformation indicating the importance of amino acid residues in dictating VP structure.

Complete replication-competent adenovirus 11p vectors with E1 or E3 insertions show improved heat stability.

Conventional adenovirus vectors harboring E1 or E3 deletions followed by the insertion of an exogenous gene show considerably reduced virion stability. Here, we report strategies to generate complete replication-competent Ad11p(RCAd11p) vectors that overcome the above disadvantage. A GFP cassette was successfully introduced either upstream of E1A or in the E3A region. The resulting vectors showed high expression levels of the hexon and E1genes and also strongly induced the cytopathic effect in targeted cells. When harboring oversized genomes, the RCAd11pE1 and RCAd11pE3 vectors showed significantly improved heat stability in comparison to Ad11pwt;of the three, RCAd11pE3 was the most tolerant to heat treatment. Electron microscopy showed that RCAd11pE3, RCAd11pE1, Ad11pwt, and Ad11pE1 Delmanifested dominant, moderate, minimum, or no full virus particles after heat treatment at 47°C for 5h. Our results demonstrated that both genome size and the insertion site in the viral genome affect virion stability.

Structure of neurotropic adeno-associated virus AAVrh.8.

Adeno-associated virus rhesus isolate 8 (AAVrh.8) is a leading vector for the treatment of neurological diseases due to its efficient transduction of neuronal cells and reduced peripheral tissue tropism. Toward identification of the capsid determinants for these properties, the structure of AAVrh.8 was determined by X-ray crystallography to 3.5 Å resolution and compared to those of other AAV isolates. The capsid viral protein (VP) structure consists of an αA helix and an eight-stranded anti-parallel ß-barrel core conserved in parvoviruses, and large insertion loop regions between the ß-strands form the capsid surface topology. The AAVrh.8 capsid exhibits the surface topology conserved in all AAVs: depressions at the icosahedral twofold axis and surrounding the cylindrical channel at the fivefold axis, and three protrusions around the threefold axis. A structural comparison to serotypes AAV2, AAV8, and AAV9, to which AAVrh.8 shares ∼ 84%, ∼ 91%, and ∼ 87% VP sequence identity, respectively, revealed differences in the surface loops known to affect receptor binding, transduction efficiency, and antigenicity. Consistent with this observation, biochemical assays showed that AAVrh.8 is unable to bind heparin and does not cross-react with conformational monoclonal antibodies and human donor serum directed against the other AAVs compared. This structure of AAVrh.8 thus identified capsid surface differences which can serve as template regions for rational design of vectors with enhanced transduction for specific tissues and escape pre-existing antibody recognition. These features are essential for the creation of an AAV vector toolkit that is amenable to personalized disease treatment.

Comparative Analysis of Cesium Chloride- and Iodixanol-Based Purification of Recombinant Adeno-Associated Viral Vectors for Preclinical Applications.

Cesium chloride (CsCl)- and iodixanol-based density gradients represent the core step in most protocols for serotype-independent adeno-associated virus (AAV) purification established to date. However, despite controversial reports about the purity and bioactivity of AAV vectors derived from each of these protocols, systematic comparisons of state-of-the-art variants of these methods are sparse. To define exact conditions for such a comparison, we first fractionated both gradients to analyze the distribution of intact, bioactive AAVs and contaminants, respectively. Moreover, we tested four different polishing methods (ultrafiltration, size-exclusion chromatography, hollow-fiber tangential flow filtration, and polyethylene glycol precipitation) implemented after the iodixanol gradient for their ability to deplete iodixanol and protein contaminations. Last, we conducted a side-by-side comparison of the CsCl and iodixanol/ultrafiltration protocol. Our results demonstrate that iodixanol-purified AAV preparations show higher vector purity but harbor more (∼20%) empty particles as compared with CsCl-purified vectors (<1%). Using mass spectrometry, we analyzed prominent protein impurities in the AAV vector product, thereby identifying known and new, possibly AAV-interacting proteins as major contaminants. Thus, our study not only provides a helpful guide for the many laboratories entering the AAV field, but also builds a basis for further investigation of cellular processes involved in AAV vector assembly and trafficking.

The structure of AAVrh32.33, a novel gene delivery vector.

The Adeno-associated viruses (AAVs) are being developed as gene delivery vectors for therapeutic clinical applications. However, the host antibody immune response directed against their capsid, prevalent in ∼40-70% of the general population, depending on serotype, negatively impacts efficacy. AAVrh32.33, a novel vector developed from rhesus macaques isolates, has significantly lower seroprevalence in human populations compared to AAV2 and AAV8, which are both in clinical use. To better understand the capsid determinants of this differential immune response to AAVrh32.33, its structure was determined by X-ray crystallography to 3.5 Å resolution. The capsid viral protein (VP) structure conserves the eight-stranded ß-barrel core and αA helix reported for other parvoviruses and the distinct capsid surface topology of the AAVs: a depression at the icosahedral twofold axis, three protrusions surrounding the threefold axis, and a depression surround a cylindrical channel at the fivefold axis. A comparison to AAV2, AAV4, and AAV8, to which AAVrh32.33 shares ∼61%, ∼81%, and ∼63% identity, respectively, identified differences in previously defined AAV VP structurally variable regions (VR-1 to VR-IX) which function as receptor attachment, transduction efficiency, and/or antigenic determinants. This structure thus provides a 3D platform for capsid engineering in ongoing efforts to develop AAVrh32.33, as well as other AAV serotypes, for tissue targeted gene-therapy applications with vectors that can evade pre-existing antibody responses against the capsid. These features are required for full clinical realization of the promising AAV gene delivery system.

Use of dodecahedron "VLPs" as an alternative to the whole adenovirus.

During human adenovirus type 3 (Ad3) infection, an excess of penton base and fiber proteins are produced. These form dodecahedral particles composed of 12 pentamers of penton base and 12 trimers of fiber protein. Beside this "natural" expression, the adenovirus dodecahedron can be expressed in the heterologous baculovirus system in two forms: a fiber-devoid dodecahedron made only of 12 penton bases (called base-dodecahedron: Bs-Dd) and the fiber-containing dodecahedron (called penton dodecahedron: Pt-Dd). These particles partly mimic the adenoviral cellular entry pathway but are devoid of genetic information making them an unusual tool for basic research or applications. We report here how these particles are expressed and purified, the labeling method for trafficking studies as well as their use in molecular interaction studies. The potential of these particles for biotechnological applications is under evaluation, making their study a "niche" along side traditional adenoviral vectors.

Quantum dot coating of baculoviral vectors enables visualization of transduced cells and tissues.

Imaging of transduced cells and tissues is valuable in developing gene transfer vectors and evaluating gene therapy efficacy. We report here a simple method to use bright and photostable quantum dots to label baculovirus, an emerging gene therapy vector. The labeling was achieved through the non-covalent interaction of glutathione-capped CdTe quantum dots with the virus envelope, without the use of chemical conjugation. The quantum dot labeling was nondestructive to viral transduction function and enabled the identification of baculoviral vector-transduced, living cells based on red fluorescence. When the labeled baculoviral vectors were injected intravenously or intraventricularly for in vivo delivery of a transgene into mice, quantum dot fluorescence signals allow us monitor whether or not the injected tissues were transduced. More importantly, using a dual-color whole-body imaging technology, we demonstrated that in vivo viral transduction could be evaluated in a real-time manner in living mice. Thus, our method of labeling a read-to-use gene delivery vector with quantum dots could be useful towards the improvement of vector design and will have the potential to assess baculovirus-based gene therapy protocols in future.

Chromatography purification of canine adenoviral vectors.

Canine adenovirus vectors (CAV2) are currently being evaluated for gene therapy, oncolytic virotherapy, and as vectors for recombinant vaccines. Despite the need for increasing volumes of purified CAV2 preparations for preclinical and clinical testing, their purification still relies on the use of conventional, scale-limited CsCl ultracentrifugation techniques. A complete downstream processing strategy for CAV2 vectors based on membrane filtration and chromatography is reported here. Microfiltration and ultra/diafiltration are selected for clarification and concentration of crude viral stocks containing both intracellular and extracellular CAV2 particles. A DNase digestion step is introduced between ultrafiltration and diafiltration operations. At these early stages, concentration of vector stocks with good recovery of viral particles (above 80%) and removal of a substantial amount of protein and nucleic acid contaminants is achieved. The ability of various chromatography techniques to isolate CAV2 particles was evaluated. Hydrophobic interaction chromatography using a Fractogel propyl tentacle resin was selected as a first chromatography step, because it allows removal of the bulk of contaminating proteins with high CAV2 yields (88%). An anion-exchange chromatography step using monolithic supports is further introduced to remove the remaining contaminants with good recovery of CAV2 particles (58-69%). The main CAV2 viral structural components are visualized in purified preparations by electrophoresis analyses. Purified vector stocks contained intact icosahedral viral particles, low contamination with empty viral capsids (10%), and an acceptable total-to-infectious particle ratio (below 30). The downstream processing strategy that was developed allows preparation of large volumes of high-quality CAV2 stocks.

Microvesicle-associated AAV vector as a novel gene delivery system.

Adeno-associated virus (AAV) vectors have shown remarkable efficiency for gene delivery to cultured cells and in animal models of human disease. However, limitations to AAV vectored gene transfer exist after intravenous transfer, including off-target gene delivery (e.g., liver) and low transduction of target tissue. Here, we show that during production, a fraction of AAV vectors are associated with microvesicles/exosomes, termed vexosomes (vector-exosomes). AAV capsids associated with the surface and in the interior of microvesicles were visualized using electron microscopy. In cultured cells, vexosomes outperformed conventionally purified AAV vectors in transduction efficiency. We found that purified vexosomes were more resistant to a neutralizing anti-AAV antibody compared to conventionally purified AAV. Finally, we show that vexosomes bound to magnetic beads can be attracted to a magnetized area in cultured cells. Vexosomes represent a unique entity which offers a promising strategy to improve gene delivery.

Recombinant adeno-associated viral vector production and purification.

Gene delivery vectors based on recombinant adeno-associated virus (AAV) are powerful tools for studying myogenesis in normal and diseased conditions. Strategies have been developed to use AAV to increase, down-regulate, or modify expression of a particular muscle gene in a specific muscle, muscle group(s), or all muscles in the body. AAV-based muscle gene therapy has been shown to cure several inherited muscle diseases in animal models. Early clinical trials have also yielded promising results. In general, AAV vectors lead to robust, long-term in vivo transduction in rodents, dogs, and non-human primates. To meet specific research needs, investigators have developed numerous AAV variants by engineering viral capsid and/or genome. Here we outline a generic AAV production and purification protocol. Techniques described here are applicable to any AAV variant.

Multifunctional silica nanoparticles with potentials of imaging and gene delivery.

This article reports the method of preparation of gadolinium oxide-doped silica nanoparticles (NPs) whose surface has been functionalized to anchor DNA onto it. The silica NP's surface was modified by 3-aminopropyltrimethoxysilane for DNA to bind electrostatically. Silica NPs with low polydispersity and encapsulating gadolinium oxide were prepared in the aqueous core of the reverse micelles. The average size of these spherical silica NPs doped with gadolinium oxide and dispersed in water is ∼ 50 nm as measured by dynamic light scattering and transmission electron microscopy. The plasmid DNA electrostatically held over NP's surface was firmly immobilized and protected from DNase attack. The gadolinium oxide-doped silica NPs are paramagnetic as observed from the nuclear magnetic resonance (NMR) line-broadening effect on proton spectrum of the surrounding water. In vitro transfection efficiencies of these gadolinium oxide-doped and DNA-conjugated silica NPs in COS-7 and 293T cells were found to be about 75% and 77% respectively of that of 'Polyfect®' as positive control. FROM THE CLINICAL EDITOR: This article reports the method of preparation of gadolinium oxide-doped silica nanoparticles (NPs) whose surface has been functionalized to anchor DNA. These NPs are paramagnetic with in vitro transfection efficiencies in COS-7 and 293T cells of about 75% and 77% compared to 'Polyfect®' as positive control.

Current good manufacturing practice production of an oncolytic recombinant vesicular stomatitis viral vector for cancer treatment.

Vesicular stomatitis virus (VSV) is an oncolytic virus currently being investigated as a promising tool to treat cancer because of its ability to selectively replicate in cancer cells. To enhance the oncolytic property of the nonpathologic laboratory strain of VSV, we generated a recombinant vector [rVSV(MΔ51)-M3] expressing murine gammaherpesvirus M3, a secreted viral chemokine-binding protein that binds to a broad range of mammalian chemokines with high affinity. As previously reported, when rVSV(MΔ51)-M3 was used in an orthotopic model of hepatocellular carcinoma (HCC) in rats, it suppressed inflammatory cell migration to the virus-infected tumor site, which allowed for enhanced intratumoral virus replication leading to increased tumor necrosis and substantially prolonged survival. These encouraging results led to the development of this vector for clinical translation in patients with HCC. However, a scalable current Good Manufacturing Practice (cGMP)-compliant manufacturing process has not been described for this vector. To produce the quantities of high-titer virus required for clinical trials, a process that is amenable to GMP manufacturing and scale-up was developed. We describe here a large-scale (50-liter) vector production process capable of achieving crude titers on the order of 10(9) plaque-forming units (PFU)/ml under cGMP. This process was used to generate a master virus seed stock and a clinical lot of the clinical trial agent under cGMP with an infectious viral titer of approximately 2 × 10(10) PFU/ml (total yield, 1 × 10(13) PFU). The lot has passed all U.S. Food and Drug Administration-mandated release testing and will be used in a phase 1 clinical translational trial in patients with advanced HCC.

Tocopheryl oligochitosan-based self assembling oligomersomes for siRNA delivery.

Amphiphilic α-tocopherol oligochitosan conjugates were constructed by conjugating α-tocopherol succinate to water soluble oligochitosans with various molecular weights. In aqueous medium, the tocopherol oligochitosan conjugates self-assembled to single layered oligomersomes. The sizes of α-tocopherol-oligochitosan-based oligomersomes (TCOsomes) could be controlled by chain lengths of oligochitosans. The mean sizes of TCOsomes were 220 and 377 nm as the sizes of oligochitosans were 4000 and 12,500, respectively. For all TCOsomes formed in this study, polydispersity indexes were in the ranges of 0.111-0.256. Cryo-TEM images showed clear thickening in the unilamellar layer of TCOsomes upon complexation with siRNAs. Zeta potentials decreased as the ratios of siRNA/TCOsomes increased. TCOsomes self-assembled from tocopherol-oligochitosan 4K (TCOsome(4K)) significantly enhanced the cellular uptake of siRNAs (>98%), and reduced the expression of target proteins more effectively than did Lipofectamine 2000. In tumor xenografted mice, the intratumoral administration of siMcl-1 using TCOsomes substantially silenced the expression of Mcl-1 and prevented the growth of tumor. The hematoxylin-eosin staining showed the apoptosis of cells in the tissues of the mice treated with siMcl-1/TCOsome(4K) complexes, but not with siGL2/TCOsome(4K) complexes. The self-assembling and size-controllable oligomersomes might be suitable for effective in vivo delivery of siRNAs.

Canarypox and fowlpox viruses as recombinant vaccine vectors: an ultrastructural comparative analysis.

Due to their natural host-range restriction to avian species, canarypox virus (CP) and fowlpox virus (FP) represent efficient and safe vaccine vectors, as they correctly express transgenes in human cells, elicit complete immune responses, and show protective efficacy in preclinical animal models. At present, no information is available on the differences in the abortive replication of these two avipox viruses in mammalian cells. In the present study, the replicative cycles of CP and FP, wild-type and recombinants, are compared in permissive and non-permissive cells, using transmission electron microscopy. We demonstrate that in non-permissive cells, the replicative cycle is more advanced in FP than in CP, that human cells, whether immune or not, are less permissive to avipox replication than monkey cells, and that the presence of virus-like particles only occurs after FP infection. Overall, these data suggest that the use of FP recombinants is more appropriate than the use of CP for eliciting an immune response.

Combination of adenovirus and cross-linked low molecular weight PEI improves efficiency of gene transduction.

Recombinant adenovirus (Ad)-mediated gene therapy is an exciting novel strategy in cancer treatment. However, poor infection efficiency with coxsackievirus and adenovirus receptor (CAR) down-regulated cancer cell lines is one of the major challenges for its practical and extensive application. As an alternative method of viral gene delivery, a non-viral carrier using cationic materials could compensate for the limitation of adenovirus. In our study, adenovectors were complexed with a new synthetic polymer PEI-DEG-bis-NPC (PDN) based on polyethylenimine (PEI), and then the properties of the vehicle were characterized by measurement of size distribution, zeta potential and transmission electron microscopy (TEM). Enhancement of gene transduction by Ad/PDN complexes was observed in both CAR-overexpressing cell lines (A549) and CAR-lacking cell lines (MDCK, CHO, LLC), as a result of facilitating binding and cell uptake of adenoviral particles by the cationic component. Ad/PDN complexes also promoted the inhibition of tumor growth in vivo and prolonged the survival time of tumor-bearing mice. These data suggest that a combination of viral and non-viral gene delivery methods may offer a new approach to successful cancer gene therapy.

Evidence for the failure of adeno-associated virus serotype 5 to package a viral genome > or = 8.2 kb.

Limited packaging capacity hinders adeno-associated virus (AAV) gene therapy. A recent study seems to have provided a solution to this problem. Allocca et al. reported that AAV-5 could package an 8.9 kb vector genome. Here we tested whether this approach can be used to deliver a large genome for Duchenne muscular dystrophy (DMD) gene therapy. We first evaluated AAV-5 packaging of an 8.2 kb genome. This vector carries two independent reporter gene cassettes, one for alkaline phosphatase (AP) and another for LacZ. Viral yield was log-fold lower than that of a regular AAV-5. Nevertheless, both AP and LacZ genes were detected in purified virus. Injection to dystrophic muscle resulted in both AP and LacZ expression. On electron microscopy, virion structure appeared normal. Surprisingly, we did not find the full-length single-stranded viral genome by alkaline gel electrophoresis. Neither did we see the full-length double-stranded replication forms in adenovirus coinfected cells. We suspect that AP and LacZ expression may have come from partially packaged 5' or 3'-half of the genome. Additional studies revealed failure of AAV-5 to package and express an 8.7 kb minidystrophin gene cassette. In summary, our results do not support the extraordinary packaging capacity of AAV-5.

Influence of coagulation factor x on in vitro and in vivo gene delivery by adenovirus (Ad) 5, Ad35, and chimeric Ad5/Ad35 vectors.

The binding of coagulation factor X (FX) to the hexon of adenovirus (Ad) 5 is pivotal for hepatocyte transduction. However, vectors based on Ad35, a subspecies B Ad, are in development for cancer gene therapy, as Ad35 utilizes CD46 (which is upregulated in many cancers) for transduction. We investigated whether interaction of Ad35 with FX influenced vector tropism using Ad5, Ad35, and Ad5/Ad35 chimeras: Ad5/fiber(f)35, Ad5/penton(p)35/f35, and Ad35/f5. Surface plasmon resonance (SPR) revealed that Ad35 and Ad35/f5 bound FX with approximately tenfold lower affinities than Ad5 hexon-containing viruses, and electron cryomicroscopy (cryo-EM) demonstrated a direct Ad35 hexon:FX interaction. The presence of physiological levels of FX significantly inhibited transduction of vectors containing Ad35 fibers (Ad5/f35, Ad5/p35/f35, and Ad35) in CD46-positive cells. Vectors were intravenously administered to CD46 transgenic mice in the presence and absence of FX-binding protein (X-bp), resulting in reduced liver accumulation for all vectors. Moreover, Ad5/f35 and Ad5/p35/f35 efficiently accumulated in the lung, whereas Ad5 demonstrated poor lung targeting. Additionally, X-bp significantly reduced lung genome accumulation for Ad5/f35 and Ad5/p35/f35, whereas Ad35 was significantly enhanced. In summary, vectors based on the full Ad35 serotype will be useful vectors for selective gene transfer via CD46 due to a weaker FX interaction compared to Ad5.

A simplified baculovirus-AAV expression vector system coupled with one-step affinity purification yields high-titer rAAV stocks from insect cells.

Scalable methods of recombinant adeno-associated virus (rAAV) production have gained much recent interest as the field of rAAV-mediated gene therapy approaches the clinic. In particular, the production of rAAV vectors in insect cells via the use of recombinant baculovirus technology has proven to be an efficient and scalable means of rAAV production. Here, we describe a method for the production of rAAV serotypes 1 and 2 in insect cells using a simplified baculovirus-AAV expression vector system coupled with particle purification via affinity chromatography. The number of separate baculovirus constructs required for rAAV production was reduced by genetically modifying the AAV rep gene to allow expression of the AAV-encoded replication enzymes, Rep78 and Rep52, from a single mRNA species and combining the modified rep gene with an AAV cap gene expression cassette in a single baculovirus construct. Additionally, we describe lysis, binding, and elution conditions compatible with a commercially available affinity medium (AVB Sepharose High Performance) used to purify rAAV particles to near homogeneity in a single chromatography step. Using the described method, we obtained an average yield of 7 x 10(4) purified rAAV particles per cell (range: 3.7 x 10(4) to 9.6 x 10(4)) from suspension cultures of recombinant baculovirus-infected insect cells.