RESUMEN
Aqueous zinc-ion batteries (ZIBs) are regarded as a type of promising energy-storage device because of their high safety and low cost, and polyaniline (PANI) is normally employed as a cathode material for ZIBs owing to its unique electrochemical properties and high environmental stability. However, a low specific capacity and a short cycle life limit the development and applications of PANI-based electrodes. Herein, we have developed a novel type of highly stable PANI-based cathode material enabled by phosphene (PR) for aqueous Zn-PANI batteries through in situ chemical oxidative polymerization. The introduction of PR nanoflakes not only inhibits the degradation of PANI and generates more active sites for Zn2+ storage but also enables a synergistic effect of the Zn2+ insertion/extraction and P-Zn alloying reaction. This promotes a high reversible specific capacity of 240.2 mAh g-1 at 0.2 A g-1 and excellent rate performance for the PR/PANI nanocomposite cathode material. Compared to the pristine PANI cathode material, the PR/PANI nanocomposite cathode material is more suitable for the Zn-PANI battery, thanks to its higher specific capacity and better cycle stability. This study provides an innovative approach for developing the next generation of reliable PR-based electrode materials for aqueous energy-storage devices.
RESUMEN
Red phosphorus (RP) is considered to be the most promising anode material for lithium-Ion batteries (LIBs) due to its high theoretical specific capacity and suitable voltage platform. However, its poor electrical conductivity (10-12 S/m) and the large volume changes that accompany the cycling process severely limit its practical application. Herein, we have prepared fibrous red phosphorus (FP) that possesses better electrical conductivity (10-4 S/m) and a special structure by chemical vapor transport (CVT) to improve electrochemical performance as an anode material for LIBs. Compounding it with graphite (C) by a simple ball milling method, the composite material (FP-C) shows a high reversible specific capacity of 1621 mAh/g, excellent high-rate performance and long cycle life with a capacity of 742.4 mAh/g after 700 cycles at a high current density of 2 A/g, and coulombic efficiencies reaching almost 100% for each cycle.
RESUMEN
The effects of atmosphere and temperature on the electrochemical reversibility of black phosphorus (BP) anodes were investigated. BP anodes prepared in ambient air exhibited much-enhanced electrochemical activity due to the newly formed Cu3P phase. This work highlights the importance of maintaining intragranular electronic conduction for developing advanced BP-based anodes with high reversible capacities.
RESUMEN
Premature drug release and poor controllability is a challenge in the practical application of tumor therapy, which may lead to poor chemotherapy efficacy and severe adverse effects. In this study, a reactive oxygen species (ROS)-cleavable nanoparticle system (MXene-TK-DOX@PDA) was designed for effective chemotherapy drug delivery and antibacterial applications. Doxorubicin (DOX) was conjugated to the surface of (3-aminopropyl)triethoxysilane (APTES)-functionalized MXene via an ROS-cleavable diacetoxyl thioketal (TK) linkage. Subsequently, the surfaces of the MXene nanosheets were coated with pH-responsive polydopamine (PDA) as a gatekeeper. PDA endowed the MXene-TK-DOX@PDA nanoparticles with superior biocompatibility and stability. The MXene-TK-DOX@PDA nanoparticles had an ultrathin planar structure and a small lateral size of approximately 180 nm. The as-synthesized nanoparticles demonstrated outstanding photothermal conversion efficiency, superior photothermal stability, and a remarkable extinction coefficient (23.3 L g-1 cm-1 at 808 nm). DOX exhibited both efficient ROS-responsive and pH-responsive release performance from MXene-TK-DOX@PDA nanoparticles due to the cleavage of the thioketal linker. In addition, MXene-TK-DOX@PDA nanoparticles displayed high antibacterial activity against both Gram-negative Escherichia coli (E. coli) and Gram-positive Bacillus subtilis (B. subtilis) within 5 h. Taken together, we hope that MXene-TK-DOX@PDA nanoparticles will enrich the drug delivery system and significantly expand their applications in the biomedical field.
RESUMEN
Ionic electroactive polymer-based actuators have attracted much attention due to their low potential stimuli. In this work, MXene-Nafion composite actuators were fabricated, and the actuation performances were tested. The morphology of the as-made MXene-Nafion composite showed that the composite membrane was homogeneous, with an MXene doping level up to 5 wt%. In addition, the results of blocked force, response speed, and durability demonstrated that the actuation behavior of the composite-based actuator was enhanced due to the efficient dispersion of the two-dimensional nanofiller MXene. In addition, the blocking force of the composite actuator with a doping level of 0.5 wt% was about 6 times that of the pure Nafion without back-relaxation and durability degradation during the testing period.
RESUMEN
Phosphorus oxide modified graphene was prepared by one-step electrochemical anodic exfoliation method and utilized as electrode in a redox supercapacitor that contained potassium iodide in electrolytes. The whole preparation process was completed in a few minutes and the yield was about 37.2%. The prepared sample has better electrocatalysis activity for I−/I−3 redox reaction than graphite due to the good charge transfer performance between phosphorus oxide and iodide ions. The maximum discharge specific capacitance is 1634.2 F/g when the current density is 3.5 mA/cm² and it can keep at 463 F/g after 500 chargingâ»discharging cycles when the current density increased about three times.
RESUMEN
Insufficient energy density and poor cyclic stability is still challenge for conductive polymer-based supercapacitor. Herein, high performance electrochemical system has been assembled by combining poly (3,4-ethylenedioxythiophene) (PEDOT):poly (styrene sulfonate) (PSS) redox electrode and potassium iodide redox electrolyte, which provide the maximum specific capacity of 51.3 mAh/g and the retention of specific capacity of 87.6% after 3000 cycles due to the synergic effect through a simultaneous redox reaction both in electrode and electrolyte, as well as the catalytic activity for reduction of triiodide of the PEDOT:PSS.
RESUMEN
The cooperative effects between the PANI (polyaniline)/nano-NiO (nano nickel oxide) composite electrode material and redox electrolytes (potassium iodide, KI) for supercapacitor applications was firstly discussed in this article, providing a novel method to prepare nano-NiO by using ß-cyelodextrin (ß-CD) as the template agent. The experimental results revealed that the composite electrode processed a high specific capacitance (2122.75 F·g-1 at 0.1 A·g-1 in 0.05 M KI electrolyte solution), superior energy density (64.05 Wh·kg-1 at 0.2 A·g-1 in the two-electrode system) and excellent cycle performance (86% capacitance retention after 1000 cycles at 1.5 A·g-1). All those ultra-high electrical performances owe to the KI active material in the electrolyte and the PANI coated nano-NiO structure.
RESUMEN
The mesoporous manganese dioxide with high specific surface area was obtained through a one-pot prepare procedure at ambient temperature under acidic conditions. And the graphene/mesoporous manganese dioxide composite was synthesized by a simple hydrothermal approach. As a comparison, silver nanowires also as a conductor was added to the mesoporous manganese dioxide. Both of the graphene and silver nanowires can increase the capacitance of the mesoporous manganese dioxide-based composite electrode materials. Compared with the graphene/mesoporous manganese dioxide composite, the silver nanowires/mesoporous manganese dioxide mixture has a better electrochemical performance, the specific capacitance and energy density is almost 2.2 times larger than that of the composites. The morphology and detail structure were investigated by the Scanning electron microscopy, X-ray diffraction, Raman spectra, Fourier transform infrared spectrometry and Nitrogen adsorptiondesorption isotherms. The electrochemical performance was assessed by the cyclic voltammograms, galvanostatic charge/discharge and electrochemical impedance spectroscopy.
RESUMEN
Conventional shape memory polymers suffer the drawbacks of low thermal stability, low strength, and low shape recovery speed. In this study, main-chain liquid crystalline polyurethane (LCPU) that contains polar groups was synthesized. Graphene oxide (GO)/LCPU composite was fabricated using the solution casting method. The tensile strength of GO/LCPU was 1.78 times that of neat LCPU. In addition, shape recovery speed was extensively improved. The average recovery rate of sample with 20 wt % GO loading was 9.2°/s, much faster than that of LCPU of 2.6°/s. The enhancement in mechanical property and shape memory behavior could be attributed to the structure of LCPU and GO, which enhanced the interfacial interactions between GO and LCPU.
RESUMEN
Redox electrolytes can provide significant enhancement of capacitance for supercapacitors. However, more important promotion comes from the synergetic effect and matching between the electrode and electrolyte. Herein, we report a novel electrochemical system consisted of a polyanilline/carbon nanotube composite redox electrode and a hydroquinone (HQ) redox electrolyte, which exhibits a specific capacitance of 7926 F/g in a three-electrode system when the concentration of HQ in H2SO4 aqueous electrolyte is 2 mol/L, and the maximum energy density of 114 Wh/kg in two-electrode symmetric configuration. Moreover, the specific capacitance retention of 96% after 1000 galvanostatic charge/discharge cycles proves an excellent cyclic stability. These ultrahigh performances of the supercapacitor are attributed to the synergistic effect both in redox polyanilline-based electrolyte and the redox hydroquinone electrode.
RESUMEN
We use 85-Gs/s digital-to-analog convertor (DAC), 85Gs/s analog-to-digital convertor (ADC), commercial optoelectronic (OE) components with an overall electronic 3dB-bandwidth of less than 15GHz, and novel digital signal processing (DSP) algorithms implemented in CMOS to realize real time coherent transceiver operation at a record baud rate of 61-Gbaud/s. Novel DSP approaches for mitigating narrow filtering effect is critical to acquire data clock, and to improve modem performance. With transmitter pre-emphasis, novel timing recovery, and soft output maximum likelihood sequence estimation (MLSE), we are able to achieve error free operation of single carrier 200-Gbit/s polarization division multiplexed quadrature phase shift keying (PDM-QPSK) after forward error correction (FEC) at 15.2dB OSNR with pre-FEC error rate of 1.4E-2, and single carrier 400-Gbit/s PDM 16-ary quadrature amplitude modulation (16QAM) after FEC at 30.2dB OSNR with pre-FEC error rate of 9.5E-3. Error free transmission for 200-Gbit/s PDM-QPSK and 400-Gbit/s PDM-16QAM was achieved after 1200km propagation with 6dB link margin and 80km propagation respectively.
RESUMEN
Mesoporous polyaniline-silica nanocomposites with a full interpenetrating structure for pseudocapacitors were synthesized via the vapor phase approach. The morphology and structure of the nanocomposites were deeply investigated by scanning electron microscopy, infrared spectroscopy, X-ray diffraction, thermal gravimetric analysis and nitrogen adsorption-desorption tests. The results present that the mesoporous nanocomposites possess a uniform particle morphology and full interpenetrating structure, leading to a continuous conductive polyaniline network with a large specific surface area. The electrochemical performances of the nanocomposites were tested in a mixed solution of sulfuric acid and potassium iodide. With the merits of a large specific surface area and suitable pore size distribution, the nanocomposite showed a large specific capacitance (1702.68 farad (F)/g) due to its higher utilization of the active material. This amazing value is almost three-times larger than that of bulk polyaniline when the same mass of active material was used.
RESUMEN
A hydrogel exhibits a real-time depth-controllable swimming motion via light-mediated modulation of local density to mimic the volume changes found in the bladders of fish. Moreover, other motions, e.g., rolling, somersaulting, and bipedal-like walking, can also be realized by designing or combining gel shapes, and the location of light.
RESUMEN
In recent years, manganese dioxide has become a research hotspot as an electrode material because of its low price. However, it has also become an obstacle to industrialization due to its low ratio of capacitance and the low rate performance which is caused by the poor electrical conductivity. In this study, a KI solution with electrochemical activity was innovatively applied to the electrolyte, and we systematically investigated the rate performance of the mesoporous manganese dioxide and the composite electrode with silver nanowires in supercapacitors. The results showed that when mesoporous manganese dioxide and mesoporous manganese dioxide/silver nanowires composite were used as electrodes, the strength of the current was amplified five times (from 0.1 to 0.5 A/g), the remaining rates of specific capacitance were 95% (from 205.5 down to 197.1 F/g) and 92% (from 208.1 down to 191.7 F/g) in the KI electrolyte, and the rate performance was much higher than which in an Na2SO4 electrolyte with a remaining rate of 25% (from 200.3 down to 49.1 F/g) and 60% (from 187.2 down to 113.1 F/g). The morphology and detail structure were investigated by Scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectrometry and Nitrogen adsorption-desorption isotherms. The electrochemical performance was assessed by cyclic voltammograms, galvanostatic charge/discharge and electrochemical impedance spectroscopy.
RESUMEN
As a common used and hardly emulsified amorphous thermoplastic, the bisphenol-A polycarbonates were used as the polymer candidate to form a novel monodispersed sub-micrometer mesoporous polymer-silica spheres with full interpenetrating structure. The synthesis procedure was based on a modified sol-gel approach in which the polycarbonate was plasticized in advanced by the surfactant of polymer emulsion. The mesoporous spheres possess a perfect uniform particle size and the polymer-silica spheres are held together by permanent entanglement in three dimensions. The defined crystallization of the polycarbonate was occurred when it was entrapped in the silica laminated matrix due to the plasticizing effect of the surfactant, and directly affected the thermal stability of the mesoporous spheres. The specific surface areas and pore diameters of mesoporous sphere were affected by the mass content and crystallization behavior of the polycarbonate. The p-phenylenediamine was used as adsorbate to investigate the cationic organics adsorption ability of the mesoporous spheres. The results shown that the polycarbonate-silica possess a well adsorption capacity for p-phenylenediamine by virtue of two kinds of hydrogen bond, and the maximum adsorption capacity was nearly 7.5 times larger than that of the hollow mesoporous silica.
RESUMEN
Highly ordered SBA-16-type mesoporous silica materials were synthesized by using poly(ethylene oxide-b-propylene oxide-b-ethylene oxide) triblock copolymer (EO(132)-PO(50)-EO(132), Pluronic F108) as template through a two-step pathway under mildly acidic conditions (pH 2.15-4.50). The highly ordered cage-like mesoporosity of the prepared SBA-16-type mesoporous silica materials having Im3m cubic mesostructure was proved by the well-defined X-ray diffraction patterns combined with transmission electron microscopy. Scanning electron microscopy shows a variation from the spherical agglomerations to the randomly shaped ones with an increase of pH value. The nitrogen adsorption-desorption analysis reveals that the prepared SBA-16-type mesoporous silica materials have a uniform small-sized pore diameter (3.37-4.24 nm) and very thick pore wall (8.84-10.2 nm). These features may make the SBA-16-type mesoporous silica materials synthesized in this study favor the incorporation of catalytically active heteroatoms in silica frameworks, and the functionalization of organic groups for applications in catalysis, sensor and separation. The two-step synthetic method under the mildly acidic conditions can also be extended to the production in the industrial scale as an environmentally friendly way.