Plastic debris in lakes and reservoirs.

Plastic debris is thought to be widespread in freshwater ecosystems globally1. However, a lack of comprehensive and comparable data makes rigorous assessment of its distribution challenging2,3. Here we present a standardized cross-national survey that assesses the abundance and type of plastic debris (>250 µm) in freshwater ecosystems. We sample surface waters of 38 lakes and reservoirs, distributed across gradients of geographical position and limnological attributes, with the aim to identify factors associated with an increased observation of plastics. We find plastic debris in all studied lakes and reservoirs, suggesting that these ecosystems play a key role in the plastic-pollution cycle. Our results indicate that two types of lakes are particularly vulnerable to plastic contamination: lakes and reservoirs in densely populated and urbanized areas and large lakes and reservoirs with elevated deposition areas, long water-retention times and high levels of anthropogenic influence. Plastic concentrations vary widely among lakes; in the most polluted, concentrations reach or even exceed those reported in the subtropical oceanic gyres, marine areas collecting large amounts of debris4. Our findings highlight the importance of including lakes and reservoirs when addressing plastic pollution, in the context of pollution management and for the continued provision of lake ecosystem services.

Comparison of the Antioxidant Properties of Green Macroalgae from Diverse European Water Habitats by Use of Several Semi-Quantitative Assays.

Nowadays, algae are becoming more and more popular as a food group rich in nutrients, cosmetic raw materials full of antioxidants or valuable dietary supplements. They are of interest for the industry because they are found almost all over the world, in all climatic zones, both in fresh and salt waters. The aim of this study was to take a broad look at green algae (Chlorophyta) and to show how large the variability of the content of active compounds may depend on the species and the place and time of sample collection. Particular attention was paid to compounds with antioxidant activity, whose simplified profiles were created on the basis of complementary, semi-quantitative methods. Additionally, time-yield extraction optimizations were performed. Three different specimens of Ulva lactuca were compared: from the coastal zone of the Baltic Sea, from the open Baltic Sea area around Bornholm and Ulva spiralis (Ulva lactuca polymorph) from the Atlantic Ocean. The studied algae of the Cladophora genera were three different species of freshwater algae from various habitats: a lake (Cladophora glomerata), a river (Cladophora rivularis) and aquarium farming (Cladophora aegagropila, syn. Aegagropila linnaei). The content of antioxidants and the extraction efficiency varied significantly depending on the species.

Overview of Allelopathic Potential of Lemna minor L. Obtained from a Shallow Eutrophic Lake.

Allelopathy is an interaction that releases allelochemicals (chemicals that act allelopathically) from plants into the environment that can limit or stimulate the development, reproduction, and survival of target organisms and alter the environment. Lemna minor L. contains chemicals that are allelopathic, such as phenolic acids. Chemical compounds contained in L. minor may have a significant impact on the development and the rate of multiplication and lead to stronger competition, which may enhance the allelopathic potential. Allelopathic potential may exist between L. minor and C. glomerata (L) Kütz. because they occupy a similar space in the aquatic ecosystem, have a similar preference for the amount of light, and compete for similar habitat resources. L. minor and C. glomerata can form dense populations on the water surface. Allelopathy can be seen as a wish to dominate one of the plants in the aquatic ecosystem. By creating a place for the development of extensive mats, an interspecific interaction is created and one of the species achieves competitive success. It is most effective as a result of the release of chemicals by macrophytes into the aquatic environment. Therefore, allelopathy plays a significant role in the formation, stabilization, and dynamics of the structure of plant communities.

Using integrated models to analyze and predict the variance of diatom community composition in an agricultural area.

With the growing demand of assessing the ecological status, there is the need to fully understand the relationship between the planktic diversity and the environmental factors. Species richness and Shannon index have been widely used to describe the biodiversity of a community. Besides, we introduced the first ordination value from non-metric multidimensional scaling (NMDS) as a new index to represent the community similarity variance. In this study, we hypothesized that the variation of diatom community in rivers in an agricultural area was influenced by hydro-chemical variables. We collected daily mixed water samples using ISCO auto water samplers for diatoms and for water-chemistry analysis at the outlet of a lowland river for a consecutive year. An integrated modeling was adopted including random forest (RF) to decide the importance of the environmental factors influencing diatoms, generalized linear models (GLMs) combined with 10-folder cross validation to analyze and predict the diatom variation. The hierarchical analysis highlighted antecedent precipitation index (API) as the controlling hydrological variable while water temperature, Si2+ and PO4-P as the main chemical controlling factors in our study area. The generalized linear models performed better prediction for Shannon index (R2 = 0.44) and NMDS (R2 = 0.51) than diatom abundance (R2 = 0.25) and species richness (R2 = 0.25). Our findings confirmed that Shannon index and the NMDS as an index showed good performance in explaining the relationship between stream biota and its environmental factors and in predicting the diatom community development based on the hydro-chemical predictors. Our study showed and highlighted the important hydro-chemical factors in the agricultural rivers, which could contribute to the further understanding of predicting diatom community development and could be implemented in the future water management protocol.

Microalgae colonization of different microplastic polymers in experimental mesocosms across an environmental gradient.

A variety of organisms can colonize microplastic surfaces through biofouling processes. Heterotrophic bacteria tend to be the focus of plastisphere research; however, the presence of epiplastic microalgae within the biofilm has been repeatedly documented. Despite the relevance of biofouling in determining the fate and effects of microplastics in aquatic systems, data about this process are still scarce, especially for freshwater ecosystems. Here, our goal was to evaluate the biomass development and species composition of biofilms on different plastic polymers and to investigate whether plastic substrates exert a strong enough selection to drive species sorting, overcoming other niche-defining factors. We added microplastic pellets of high-density polyethylene (HDPE), polyethylene terephthalate (PET), and a mix of the two polymers in 15 lentic mesocosms in five different locations of the Iberian Peninsula, and after one month, we evaluated species composition and biomass of microalgae developed on plastic surfaces. Our results, based on 45 samples, showed that colonization of plastic surfaces occurred in a range of lentic ecosystems covering a wide geographical gradient and different environmental conditions (e.g., nutrient concentration, conductivity, macrophyte coverage). We highlighted that total biomass differed based on the polymer considered, with higher biomass developed on PET substrate compared to HDPE. Microplastics supported the growth of a rich and diversified community of microalgae (242 species), with some cosmopolite species. However, we did not observe species-specificity in the colonization of the different plastic polymers. Local species pool and nutrient concentration rather than polymeric composition seemed to be the determinant factor defying the community diversity. Regardless of specific environmental conditions, we showed that many species could coexist on the surface of relatively small plastic items, highlighting how microplastics may have considerable carrying capacity, with possible consequences on the wider ecological context.

Effects of the herbicides metazachlor and flufenacet on phytoplankton communities - A microcosm assay.

Agrochemicals are the main pollutants in freshwater ecosystems. Metazachlor and flufenacet are two common herbicides applied in fall (i.e., August-October) to agricultural fields in Northern Germany. High concentrations of these herbicides are often found in adjacent aquatic ecosystems. Phytoplankton are one of the highly susceptible non-targeted aquatic organismal groups for herbicides and effects on phytoplankton may initiate a chain of consequences in meta communities through trophic interactions. Few studies have focused on responses of the phytoplankton community for metazachlor and, no studies have focused on flufenacet. We studied the effects of metazachlor and flufenacet on the phytoplankton community by conducting a microcosm experiment exposing natural fall phytoplankton communities to environmentally realistic concentrations as 0 (control), 0.5, 5 and 50 µg L-1 of metazachlor and flufenacet treatments over a 4-week period. We measured changes in density, composition (i.e., in phyla and species level), taxonomic diversity indices, and functional features of phytoplankton communities as a response to herbicides. A reduction in the density of Chlorophyta species (e.g., Koliella longiseta, Selenastrum bibraianum) and Cyanobacteria species (e.g., Merismopedia tenuissima and Aphanocapsa elegans) was observed in herbicide treatments compared to controls. The phytoplankton community shifted towards a high density of species from Bacillariophyta (e.g., Nitzschia fonticola and Cyclotella meneghiniana), Miozoa (i.e., Peridinium willei), and Euglenozoa (i.e., Trachelomonas volvocina) in herbicide treatments compared to controls. Metazachlor and flufenacet showed significant negative effects on taxonomic diversity indices (e.g., species richness, the Shannon-Wiener index) and functional features (e.g., functional dispersion and redundancy) of the phytoplankton communities, with increasing herbicide concentrations. Our study provides insights into direct, selective, and irrecoverable effects of metazachlor and flufenacet on phytoplankton communities in the short-term. The comprehensive understanding of these effects of environmentally realistic herbicide concentrations on aquatic biota is essential for a sustainable management of aquatic ecosystems in agricultural areas.

Characteristics of the Phytoplankton Community Structure and Water Quality Evaluation in Autumn in the Huaihe River (China).

As an important indicator of phytoplankton in water quality evaluation, the phytoplankton community structure is very sensitive to changes in water quality, and analyzing their community composition and function is of great significance for the ecological management and maintenance of watershed environments. To understand the environment and ecological status as well as reconstruct or restore a healthy aquatic ecosystem in the Huaihe River Basin in China, a comprehensive phytoplankton survey was conducted in the main stream and main tributaries of the Huaihe River in 2019. A total of 266 species or genera of phytoplankton were identified, mainly belonging to Bacillariophyta and Chlorophyta. The number of phytoplankton species upstream and downstream was higher than that in the middle. The results of phytoplankton biomass showed significant spatial differences in different river reaches (p < 0.05). The identified phytoplankton functional groups (FGs) were divided into 27 groups, including 16 representative functional groups (RFGs), followed by A, B, F, G, H1, J, K, LM, LO, M, MP, P, T, TB, WO and X2. The mean values of the Shannon-Wiener index and Margalef index were 2.47 and 2.50, respectively, showing that most of the water in the Huaihe River Basin was in a state of moderate nutritional status. The results of this study provided a reference for studying the composition and distribution of phytoplankton communities, nutrient status, and pollution levels in the Huaihe River Basin, as well as in other similar watersheds.

Influences of pesticides, nutrients, and local environmental variables on phytoplankton communities in lentic small water bodies in a German lowland agricultural area.

Agrochemicals such as pesticides and nutrients are concurrent chemical stressors in freshwater aquatic ecosystems surrounded by agricultural areas. Lentic small water bodies (LSWB) are ecologically significant habitats especially for maintaining biodiversity but highly understudied. Phytoplankton are ideal indicator species for stress responses. Functional features of the phytoplankton are important in revealing the processes that determine the structure of the communities. In this study, we investigated the effects of pesticides, nutrients, and local environmental variables on the species composition and functional features of phytoplankton communities in LSWB. We studied pesticide toxicity of ninety-four pesticides, three nutrients (NH4-N, NO3-N and PO4-P) and local environment variables (precipitation, water level change, temperature, dissolved oxygen concentration, electrical conductivity, pH) in five LSWB over twelve weeks during the spring pesticide application period. We explored respective changes in species composition of phytoplankton community and functional features. Redundancy analysis and variance partitioning analysis were applied to correlate phytoplankton community compositions with the pesticide toxicity (as maximum toxicity in toxic units), nutrients and local environment variables. We used multiple linear regression models to identify the main environmental variables driving the functional features of phytoplankton communities. Pesticide toxicity, nutrients and local environmental variables significantly (p < 0.001) contributed to shaping phytoplankton community composition individually. Local environment variables showed the highest pure contribution for driving phytoplankton composition (12%), followed by nutrients (8%) and pesticide toxicity (2%). Functional features (represented by functional diversity and functional redundancy) of the phytoplankton community were significantly affected by pesticide toxicity and nutrients concentrations. The functional richness and functional evenness were negatively affected by PO4-P concentrations. Pesticide toxicity was positively correlated with functional redundancy indices. Our findings emphasized the relative importance of concurrent multiple stressors (e.g., pesticides and nutrients) on phytoplankton community structure, directing potential effects on metacommunity structures in aquatic ecosystems subjected to agricultural runoff.

Environmental impact of molecularly imprinted polymers used as analyte sorbents in mass spectrometry.

The molecularly imprinted polymers (MIPs) with the following herbicides used as templates 2,4-dichlorophenoxyacetic acid (2,4-D) or 4-chloro-2-methylphenoxy- acetic acid (MCPA) were synthesized by precipitation polymerization technique using 4-vinylpyridine (4-VP) as a functional monomer, ethylene glycol dimethacrylate (EGDMA) as a cross-linking agent, and 2,2'-azobisisobutyronitrile (AIBN) as an initiator in methanol solvent. For the flavonoid MIPs, rutin (Ru) and quercetin (Q) were used as templates and synthesized via a similar technique, utilizing acrylamide (AA) as a functional monomer. Analysis of binding in the molecularly imprinted and non-imprinted polymer (NIP) has proved that MIP shows a higher affinity towards the analytes, compared to NIP. MIP was used to determine analytes in water using the Flowing Atmospheric-Pressure Afterglow Mass Spectrometry (FAPA-MS) technique. In this approach, the method limit of detection (MLOD) of 2,4-D, MCPA, Ru, and Q in MIP was 4, 3, 10, and 5 µg in 1 g MIP, respectively. The release kinetics of the analytes from MIP and their stability in water was studied. The cultures of Tetradesmus obliquus (Turpin) M.J. Wynne and Daphnia magna Straus were used for in vivo toxicity studies revealing that only Ru-MIP and Q-MIP had negative effect on the living organisms used in the bioassays.

Internal Phosphorus Loading from the Bottom Sediments of a Dimictic Lake During Its Sustainable Restoration.

The ribbon type Lake Durowskie (Western Poland) is currently undergoing a sustainable restoration process due to water quality deterioration, manifested in water blooms, low transparency, and oxygen deficits near the bottom sediments. Three restoration methods were applied: (i) hypolimnion aeration using two wind-driven pulverizing aerators installed at the deepest places, (ii) phosphorus inactivation using small doses of iron sulfate and magnesium chloride several times a year, and (iii) biomanipulation using pike fry stocking. Research on the exchange of phosphorus in the sediment-water interphase was conducted in the years 2009-2016 to determine the multiannual changes of internal phosphorus loading from bottom sediments during the restoration process. The sustainable approach resulted in a decrease of internal phosphorus loading and a gradual increase in the sorption capacity of bottom sediments, particularly noticeable in the last 2 years. The content of phosphorus in the sediment and in the interstitial water fluctuated, showing an increase during the first years of restoration and then a gradual decrease. It was proved that the process of sustainable restoration is cheap and does not interfere strongly with the ecosystem, although it is long-lasting. It should be continued for many years, especially in the case of continuous external loading of the lake with nutrients from the catchment area, i.e., until the water quality in the main tributary improves and the lake ecosystem stabilizes.

Temperature Effects Explain Continental Scale Distribution of Cyanobacterial Toxins.

Insight into how environmental change determines the production and distribution of cyanobacterial toxins is necessary for risk assessment. Management guidelines currently focus on hepatotoxins (microcystins). Increasing attention is given to other classes, such as neurotoxins (e.g., anatoxin-a) and cytotoxins (e.g., cylindrospermopsin) due to their potency. Most studies examine the relationship between individual toxin variants and environmental factors, such as nutrients, temperature and light. In summer 2015, we collected samples across Europe to investigate the effect of nutrient and temperature gradients on the variability of toxin production at a continental scale. Direct and indirect effects of temperature were the main drivers of the spatial distribution in the toxins produced by the cyanobacterial community, the toxin concentrations and toxin quota. Generalized linear models showed that a Toxin Diversity Index (TDI) increased with latitude, while it decreased with water stability. Increases in TDI were explained through a significant increase in toxin variants such as MC-YR, anatoxin and cylindrospermopsin, accompanied by a decreasing presence of MC-LR. While global warming continues, the direct and indirect effects of increased lake temperatures will drive changes in the distribution of cyanobacterial toxins in Europe, potentially promoting selection of a few highly toxic species or strains.

Valuable natural products from marine and freshwater macroalgae obtained from supercritical fluid extracts.

The biologically active compounds (fatty acids, pigments, phenolics, and flavonoid content) were studied in supercritical fluid extracts from the biomass of marine (Ulva clathrata, Cladophora glomerata, Polysiphonia fucoides, and their multi-species mixture) and freshwater (C. glomerata) macroalgae. Different extraction techniques were used in order to compare differences in the biologically active compound composition of the macroalgal extracts. The results indicated that the saturated and unsaturated fatty acids ranged from C9:0 to C22:0. The analysis of differences in the composition of unsaturated to saturated fatty acids in extracts showed that palmitic acid (C16:0) and oleic acid (C18:1, n-9) reached the highest value not only in marine monospecies and multi-species biomass but also in the freshwater macroalga C. glomerata. When comparing the similarity between the concentration of fatty acids and the ratio of the concentration of unsaturated fatty acids to saturated in macroalgal extracts, we found small but not statistically significant variations in values between years (up to 10%). This is acceptable for applications as a stable raw material for industrial purposes. Significantly higher values of fatty acids, carotenoids, and chlorophylls were obtained in the case of SC-CO2 extraction. The active ingredients of polyphenols, possessing antioxidant activity ranged from approximately 2-4%. Moreover, flavonoids represented less than 10% of the total content of polyphenolic compounds. The extraction efficiency of polyphenols was higher from a mixture of marine algae for the ultrasound-assisted extraction compared to freshwater. All these findings show that marine and freshwater macroalgae, as a raw material, have the optimal biologically active compounds composition for cosmetics.

Seasonal differences in the content of phenols and pigments in thalli of freshwater Cladophora glomerata and its habitat.

Polyphenols are chemicals that primarily inhibit the growth of various autotrophic organisms. The presence of these metabolites greatly boosts the ecological dominance of eg. Cladophora, which creates large surface mats. The main goal of our work was to quantify the phenol and polyphenols (allelopathic substances) secreted by the macroalgae as a result of exposure to biotic stress caused by competition. The research was carried out on the Cladophora glomerata biomass collected from two freshwater ecosystems located in Wielkopolska Region (Poland, Fig. 1): Oporzynskie Lake (N52° 55', E 17° 9') and Nielba River (N52˚48', E 17° 12'). Seasonal variability (May-October 2015) in the properties of C. glomerata mats in the river and lake ecosystem was also analyzed in relation to the physicochemical parameters of water. In addition, the content of pigments in the analyzed biomass was determined during the appearance of algae mats in water reservoirs. Biomass extraction was performed to determine the phenolic and carotenoid contents (chlorophyll and carotenoids) by using two extraction methods: microwave-assisted extraction (MAE) and supercritical fluid extraction (SFE). After isolation of the phenols from the thalli (mats) and the habitat, they were analyzed using the Folin-Ciocalteu method with some modifications, while the pigment content (chlorophyll and carotenoids) was evaluated by the spectrophotometric method Liechtenthaler (1987) with some variations. Analysis of the content of these components in algae extracts indicates that the tendency of changes in their contents was similar or the same. Growth and decrease of phenolic content (Cladophora T MAE and Cladophora T SFE) and pigments (MAE chlorophyll, SFE and MAE carotenoids) at the same time were independent of the insulation method used. The mats formed by C. glomerata on the surface of Lake Oporzynskie were more stable and larger surface area than those on the Nielba River, which could explain differences in polyphenol concentrations in these two aquatic ecosystems. The results suggest a reduction in the secretion of phenolic compounds with an aging population of algae.

The accumulation of metal (Co, Cr, Cu, Mn and Zn) in freshwater Ulva (Chlorophyta) and its habitat.

The possibility of using freshwater Ulva (Chlorophyta) as a bioaccumulator of metals (Co, Cr, Cu, Mn and Zn) in lake and river water was examined weekly in the summer of 2010 in three types of samples: the water, the sediment and the thalli of Ulva. Samples of freshwater Ulva were collected from two aqueous ecosystems lie 250 km away from the basin of the Baltic Sea and 53 km from each other. A flow lake located in the centre of the big city was the first water reservoir (ten sites) and second, the suburban river (six sites). The mean metal concentrations in the Ulva tissue from the river and the lake decreased in the following order: Mn > Zn > Cr > Cu > Co and Mn > Cr > Zn > Cu > Co, respectively. Moreover, a negative and statistically significant correlation between Mn concentrations in the Ulva thalli and the river water was observed. Additionally, numerous correlations were noted between the different concentrations of metals within the Ulva thalli, in the water and in the sediment. The great concentrations of Mn and Zn and the smallest of Co were found in thalli of Ulva, irrespective of the type of the ecosystem from which samples of algal thalli originated. Freshwater Ulva populations examined in this study were clearly characterized a dozen or so times by the higher Mn and Cr accumulation than taxa from that genera coming from sea ecosystems. The calculated bioconcentration factor confirm the high potential for freshwater Ulva to be a bioaccumulator of trace metals in freshwater ecosystems.

Freshwater Ulva (Chlorophyta) as a bioaccumulator of selected heavy metals (Cd, Ni and Pb) and alkaline earth metals (Ca and Mg).

We analyzed the ability of freshwater taxa of the genus Ulva (Ulvaceae, Chlorophyta) to serve as bioindicators of metal in lakes and rivers. Changes in heavy metal (Ni, Cd and Pb) and alkaline earth metal (Ca and Mg) concentrations in freshwater Ulva thalli were investigated during the period from June to August 2010. The study was conducted in two ecosystems in Western Poland, the Malta lake (10 sites) and the Nielba river (six sites). Three components were collected for each sample, including water, sediment and Ulva thalli. The average concentrations of metals in the water sample and in the macroalgae decreased in the following order: Ca>Mg>Ni>Pb>Cd. The sediment revealed a slightly altered order: Ca>Mg>Pb>Ni>Cd. Ca and Mg were found at the highest concentrations in thalli due to the presence of carbonate on its surface. Among the examined heavy metals in thalli, Ni was in the highest concentration, and Cd found in the lowest concentration. There were statistically significant correlations between the levels of metals in macroalgae, water and sediment. Freshwater populations of Ulva exhibited a greater efficiency to bioaccumulate nickel as compared to species derived from marine ecosystems.