RESUMEN
The low electrical conductivity of conductive hydrogels limits their applications as soft conductors in bioelectronics. This low conductivity originates from the high water content of hydrogels, which impedes facile carrier transport between conductive fillers. This study presents a highly conductive and stretchable hydrogel nanocomposite comprising whiskered gold nanosheets. A dry network of whiskered gold nanosheets is fabricated and then incorporated into the wet hydrogel matrices. The whiskered gold nanosheets preserve their tight interconnection in hydrogels despite the high water content, providing a high-quality percolation network even under stretched states. Regardless of the type of hydrogel matrix, the gold-hydrogel nanocomposites exhibit a conductivity of ≈520 S cm-1 and a stretchability of ≈300% without requiring a dehydration process. The conductivity reaches a maximum of ≈3304 S cm-1 when the density of the dry gold network is controlled. A gold-adhesive hydrogel nanocomposite, which can achieve conformal adhesion to moving organ surfaces, is fabricated for bioelectronics demonstrations. The adhesive hydrogel electrode outperforms elastomer-based electrodes in in vivo epicardial electrogram recording, epicardial pacing, and sciatic nerve stimulation.
RESUMEN
Implantable bioelectronics has attracted significant attention in electroceuticals and clinical medicine for precise diagnosis and efficient treatment of target diseases. However, conventional rigid implantable devices face challenges such as poor tissue-device interface and unavoidable tissue damage during surgical implantation. Despite continuous efforts to utilize various soft materials to address such issues, their practical applications remain limited. Here, a needle-like stretchable microfiber composed of a phase-convertible liquid metal (LM) core and a multifunctional nanocomposite shell for minimally invasive soft bioelectronics is reported. The sharp tapered microfiber can be stiffened by freezing akin to a conventional needle to penetrate soft tissue with minimal incision. Once implanted in vivo where the LM melts, unlike conventional stiff needles, it regains soft mechanical properties, which facilitate a seamless tissue-device interface. The nanocomposite incorporating with functional nanomaterials exhibits both low impedance and the ability to detect physiological pH, providing biosensing and stimulation capabilities. The fluidic LM embedded in the nanocomposite shell enables high stretchability and strain-insensitive electrical properties. This multifunctional biphasic microfiber conforms to the surfaces of the stomach, muscle, and heart, offering a promising approach for electrophysiological recording, pH sensing, electrical stimulation, and radiofrequency ablation in vivo.
RESUMEN
The identification of neural networks for large areas and the regulation of neuronal activity at the single-neuron scale have garnered considerable attention in neuroscience. In addition, detecting biochemical molecules and electrically, optically, and chemically controlling neural functions are key research issues. However, conventional rigid and bulky bioelectronics face challenges for neural applications, including mechanical mismatch, unsatisfactory signal-to-noise ratio, and poor integration of multifunctional components, thereby degrading the sensing and modulation performance, long-term stability and biocompatibility, and diagnosis and therapy efficacy. Implantable bioelectronics have been developed to be mechanically compatible with the brain environment by adopting advanced geometric designs and utilizing intrinsically stretchable materials, but such advances have not been able to address all of the aforementioned challenges.Recently, the exploration of nanomaterial synthesis and nanoscale fabrication strategies has facilitated the design of unconventional soft bioelectronics with mechanical properties similar to those of neural tissues and submicrometer-scale resolution comparable to typical neuron sizes. The introduction of nanotechnology has provided bioelectronics with improved spatial resolution, selectivity, single neuron targeting, and even multifunctionality. As a result, this state-of-the-art nanotechnology has been integrated with bioelectronics in two main types, i.e., bioelectronics integrated with synthesized nanomaterials and bioelectronics with nanoscale structures. The functional nanomaterials can be synthesized and assembled to compose bioelectronics, allowing easy customization of their functionality to meet specific requirements. The unique nanoscale structures implemented with the bioelectronics could maximize the performance in terms of sensing and stimulation. Such soft nanobioelectronics have demonstrated their applicability for neuronal recording and modulation over a long period at the intracellular level and incorporation of multiple functions, such as electrical, optical, and chemical sensing and stimulation functions.In this Account, we will discuss the technical pathways in soft bioelectronics integrated with nanomaterials and implementing nanostructures for application to neuroengineering. We traced the historical development of bioelectronics from rigid and bulky structures to soft and deformable devices to conform to neuroengineering requirements. Recent approaches that introduced nanotechnology into neural devices enhanced the spatiotemporal resolution and endowed various device functions. These soft nanobioelectronic technologies are discussed in two categories: bioelectronics with synthesized nanomaterials and bioelectronics with nanoscale structures. We describe nanomaterial-integrated soft bioelectronics exhibiting various functionalities and modalities depending on the integrated nanomaterials. Meanwhile, soft bioelectronics with nanoscale structures are explained with their superior resolution and unique administration methods. We also exemplified the neural sensing and stimulation applications of soft nanobioelectronics across various modalities, showcasing their clinical applications in the treatment of neurological diseases, such as brain tumors, epilepsy, and Parkinson's disease. Finally, we discussed the challenges and direction of next-generation technologies.
Asunto(s)
Nanoestructuras , Nanoestructuras/química , Humanos , Neuronas , Nanotecnología/métodos , Animales , ElectrónicaRESUMEN
This study evaluated the positive effects of autumn olive berries (AOBs) extract on delaying aging by improving lipid metabolism in middle-aged Caenorhabditis elegans that had become obese due to a high-glucose (GLU) diet. The total phenolic content and DPPH radical scavenging abilities of freeze-dried AOBs (FAOBs) or spray-dried AOBs (SAOBs) were examined, and FAOBs exhibited better antioxidant activity. HPLC analysis confirmed that catechin is the main phenolic compound of AOBs; its content was 5.95 times higher in FAOBs than in SAOBs. Therefore, FAOBs were used in subsequent in vivo experiments. FAOBs inhibited lipid accumulation in both the young adult and middle-aged groups in a concentration-dependent manner under both normal and 2% GLU conditions. Additionally, FAOBs inhibited ROS accumulation in a concentration-dependent manner under normal and 2% GLU conditions in the middle-aged worms. In particular, FAOB also increased body bending and egg production in middle-aged worms. To confirm the intervention of genetic factors related to lipid metabolism from the effects of FAOB, body lipid accumulation was confirmed using worms deficient in the daf-16, atgl-1, aak-1, and akt-1 genes. Regarding the effect of FAOB on reducing lipid accumulation, the impact was nullified in daf-16-deficient worms under the 2% GLU condition, and nullified in both the daf-16- and atgl-1-deficient worms under fasting conditions. In conclusion, FAOB mediated daf-16 and atgl-1 to regulate lipogenesis and lipolysis in middle-aged worms. Our findings suggest that FAOB improves lipid metabolism in metabolically impaired middle-aged worms, contributing to its age-delaying effect.
Asunto(s)
Proteínas de Caenorhabditis elegans , Elaeagnaceae , Olea , Animales , Caenorhabditis elegans/metabolismo , Metabolismo de los Lípidos , Olea/metabolismo , Proteínas de Caenorhabditis elegans/genética , Proteínas de Caenorhabditis elegans/metabolismo , Frutas/metabolismo , Envejecimiento , Elaeagnaceae/metabolismo , Lípidos/farmacología , LongevidadRESUMEN
Despite advances in a wide range of device applications of hydrogels, including implantable ones, a method for deploying patterned hydrogel devices into the body in a minimally-invasive manner is not available yet. However, in situ patterning of the hydrogel in vivo has an obvious advantage, by which incision surgery for implantation of the hydrogel device can be avoided. Here, a minimally-invasive and in vivo hydrogel patterning method for in situ fabrication of implantable hydrogel devices is presented. The sequential application of injectable hydrogels and enzymes, with assistance of minimally-invasive surgical instruments, enables the in vivo and in situ hydrogel patterning. This patterning method can be achieved by adopting an appropriate combination of the sacrificial mold hydrogel and the frame hydrogel, in consideration of unique material properties of the hydrogels such as high softness, facile mass transfer, biocompatibility, and diverse crosslinking mechanisms. In vivo and in situ patterning of the hydrogels functionalized with nanomaterials is also demonstrated to fabricate the wireless heater and tissue scaffold, showcasing broad applicability of the patterning method.
Asunto(s)
Hidrogeles , Ingeniería de Tejidos , Ingeniería de Tejidos/métodos , Andamios del TejidoRESUMEN
Mechanically soft metallic nanocomposites have gained much attention as a key material for intrinsically stretchable biointegrated devices. However, it has been challenging to develop a stretchable conductive nanocomposite with all the desired material characteristics including high conductivity, high stretchability, low cytotoxicity, and low impedance. Here, we present a material strategy for the stretchable conductive nanocomposite, particularly emphasizing low impedance, by combining silver-gold-platinum core-shell-shell nanowires and homogeneously dispersed in situ synthesized platinum nanoparticles (Pt NPs). The highly embossed structure of the outermost Pt shell, together with the intrinsic electrical property of Pt, contributes to minimizing the impedance. The gold-platinum double-layer sheath prevents leaching of cytotoxic Ag ions, thus improving biocompatibility. Homogeneously dispersed Pt NPs, synthesized in situ during fabrication of the nanocomposite, simultaneously enhance conductivity, reduce impedance, and improve stretchability by supporting the percolation network formation. This intrinsically stretchable nanocomposite conductor can be applied to wearable and implantable bioelectronics for recording biosignals and delivering electrical stimulations in vivo.
Asunto(s)
Nanopartículas del Metal , Nanocables , Dispositivos Electrónicos Vestibles , Nanocables/química , Impedancia Eléctrica , Nanopartículas del Metal/química , Platino (Metal) , Oro/químicaRESUMEN
Herein we describe the divergent synthesis of two types of indolizines via construction of the pyrrole moiety from pyridine-2-acetonitriles, arylglyoxals, and TMSCN. While one-pot three-component coupling provided 2-aryl-3-aminoindolizines via an unusual fragmentation process, a sequential two-step assembly protocol with these starting materials allowed efficient access to a wide range of new 2-acyl-3-aminoindolizines through an aldol condensation-Michael addition-cycloisomerization process. The subsequent manipulation of 2-acyl-3-aminoindolizines enabled direct access to novel polycyclic N-fused heteroaromatic skeletons.
RESUMEN
A modular approach to a polyfunctionalized 5H-indolizino[3,2-b]indole, an indolizine-indole fused system, was achieved from readily available pyridine-2-acetonitrile, 2-bromobenzaldehyde, and TMSCN via the strategic combination of a one-pot three-component assembly and Cu-catalyzed Ullmann-type double C-N coupling reactions through which five new bonds (two C-C and three C-N) were formed in two steps.
Asunto(s)
Cobre , Indoles , Cobre/química , Catálisis , Estructura Molecular , Indoles/químicaRESUMEN
A highly efficient approach to a new indolizine scaffold fused with pyrrolo[1,2-c]pyrimidine was achieved via one-pot three-component coupling followed by an oxidative cyclization reaction. The simple two-step sequence allowed rapid access to various tetracyclic compounds from commercially available starting materials with the formation of five new bonds. Here, we observed the effects of these compounds on cell viability in HepG2, H1299, HT29, AGS, and A549 cancer cell lines. Interestingly, this fused scaffold had more potent anticancer activity in hepatocellular carcinoma HepG2 and Huh7 cells than other cancer cells. In particular, 5r strongly decreased cell viability in HepG2 and Huh7 cells with an IC50 value of 0.22 ± 0.08 and 0.10 ± 0.11 µM, respectively, but had a very weak inhibitory effect on the cell viability of other cancer cell lines. In addition, 5r significantly inhibited cell migration and induced apoptosis in HepG2 and Huh7 cells via the activation of caspase-3 and cleavage of PARP in a dose-dependent manner. Notably, the co-treatment of 5r with gemcitabine resulted in the significant additional inhibition of cell viability in HepG2 and Huh7 cells. Our results suggest that 5r could be used to develop new chemotype anticancer agents against liver cancers.
RESUMEN
Recently, stationary wireless power transfer (WPT) has been widely adopted in commercial devices. However, the current WPT configuration is limited in its operational area and susceptible to operating condition changes, impeding its applications for dynamic environments. To overcome the limitations, we propose a WPT system with laterally aligned neutral elements in parity-time (PT) symmetry, which can widen the operational area with the number of neutrals N. Compared to the conventional multiple-input-single-output WPT, the dimension of system complexity is substantially reduced from R × CN to RN+1 because the neutral amplitudes are simply controlled by coupling capacitors. The operational frequency is automatically adjusted to a real eigenvalue of the PT-symmetric system to achieve high voltage gain and efficiency, making the system robust. The performance of the system calculated by the coupled-mode theory was experimentally verified with rigid and flexible types of receivers, confirming its potential in both industrial and biomedical electronics.
RESUMEN
A new pyrrolo[1,2-a]pyrazine chemical space with a poly-substituted pyrazine unit was readily accessed by Sc(OTf)3-catalyzed one-pot three-component coupling of a pyrrole derivative, amine, and trialkylphosphite under environment-friendly conditions. The formation of multiple bonds (two C-N and one C-P) via a domino process consisting of the chemoselective Kabachnik-Fields reaction and intramolecular cyclodehydration allowed for the construction of highly functionalized pyrazines.