Surface Cleaning of Oil Contaminants Using Bulk Nanobubbles.

The removal of oil from solid surfaces, such as textiles and plates, remains a challenge due to the strong binding affinity of the oil. Conventional methods for surface cleaning often require surfactants and mechanical abrasion to enhance the cleaning process. However, in excess, these can pose adverse effects on the environment and to the material. This study investigated how bulk nanobubble water can clean oil microdroplets deposited on surfaces like glass coverslips and dishes. Microscopy imaging and further image analysis clearly revealed that these microdroplets detached from both hydrophobic and hydrophilic surfaces when washed with bulk nanobubble water within a fluidic microchannel. Oil contaminant cleaning was also conducted in water as mobile phase to mimic the circumstances that occur in a dishwasher and washing machine. Cleaning on a larger scale also proved very successful in the removal of oil from a porcelain bowl. These results indicate that nanobubble water can easily remove oil contaminants from glass and porcelain surfaces without the assistance of surfactants. This is in stark contrast to negligible results obtained with a control solution without nanobubbles. This study indicates that nanobubble technology is an innovative, low-cost, eco-friendly approach for oil removal, demonstrating its potential for broad practical applications.

Viscoelastic microfluidics for enhanced separation resolution of submicron particles and extracellular vesicles.

Manipulation, focusing, and separation of submicron- and nanoparticles such as extracellular vesicles (EVs), viruses and bacteria have broad applications in disease diagnostics and therapeutics. Viscoelastic microfluidic technology emerges as a promising technique, and it shows an unparalleled capacity to manipulate and separate submicron particles in a high resolution based on the elastic effects of non-Newtonian mediums. The maximum particle separation resolution for the reported state-of-the-art viscoelastic microfluidics is around 200 nm. To further enhance the reseparation resolution, this work develops a viscoelastic microfluidic device that can achieve a finer separation resolution up to 100 nm, by optimising the operating conditions such as flow rate, flow rate ratio and polyethylene oxide (PEO) concentration. With these optimised conditions, we separated a ternary mixture of 100 nm, 200 nm and 500 nm polystyrene particles, with purities above 90%, 70% and 82%, respectively. Furthermore, we also applied the developed viscoelastic microfluidic device for the separation of cancer cell-secreted extracellular vesicles (EVs) into three different size groups. After single processing, the separation efficiencies for small EVs (sEVs, <150 nm), medium EVs (mEVs, 150-300 nm), and large EVs (>300 nm) were 86%, 80% and 50%, respectively. The enrichment factors for the three EV groups were 2.4, 1.1 and 1.3, respectively. Moreover, we observed an unexpected effect of high PEO concentrations (2000-5000 ppm) on the lateral migration of nanoparticles where nanoparticles of up to 50 nm surprisingly can migrate and concentrate at the middle of the microchannel. This simple and label-free viscoelastic microfluidic device possesses excellent potential for sorting submicron particles for various chemical, biological, medical and environmental applications.

Asymmetrical Obstacles Enable Unilateral Inertial Focusing and Separation in Sinusoidal Microchannel.

Inertial microfluidics uses the intrinsic fluid inertia in confined channels to manipulate the particles and cells in a simple, high-throughput, and precise manner. Inertial focusing in a straight channel results in several equilibrium positions within the cross sections. Introducing channel curvature and adjusting the cross-sectional aspect ratio and shape can modify inertial focusing positions and can reduce the number of equilibrium positions. In this work, we introduce an innovative way to adjust the inertial focusing and reduce equilibrium positions by embedding asymmetrical obstacle microstructures. We demonstrated that asymmetrical concave obstacles could break the symmetry of original inertial focusing positions, resulting in unilateral focusing. In addition, we characterized the influence of obstacle size and 3 asymmetrical obstacle patterns on unilateral inertial focusing. Finally, we applied differential unilateral focusing on the separation of 10- and 15-µm particles and isolation of brain cancer cells (U87MG) from white blood cells (WBCs), respectively. The results indicated an excellent cancer cell recovery of 96.4% and WBC rejection ratio of 98.81%. After single processing, the purity of the cancer cells was dramatically enhanced from 1.01% to 90.13%, with an 89.24-fold enrichment. We believe that embedding asymmetric concave micro-obstacles is a new strategy to achieve unilateral inertial focusing and separation in curved channels.

Nanobubble technologies: Applications in therapy from molecular to cellular level.

Nanobubbles are gaseous entities suspended in bulk liquids that have widespread beneficial usage in many industries. Nanobubbles are already proving to be versatile in furthering the effectiveness of disease treatment on cellular and molecular levels. They are functionalized with biocompatible and stealth surfaces to aid in the delivery of drugs. At the same time, nanobubbles serve as imaging agents due to the echogenic properties of the gas core, which can also be utilized for controlled and targeted delivery. This review provides an overview of the biomedical applications of nanobubbles, covering their preparation and characterization methods, discussing where the research is currently focused, and how they will help shape the future of biomedicine.

Recent microfluidic advances in submicron to nanoparticle manipulation and separation.

Manipulation and separation of submicron and nanoparticles are indispensable in many chemical, biological, medical, and environmental applications. Conventional technologies such as ultracentrifugation, ultrafiltration, size exclusion chromatography, precipitation and immunoaffinity capture are limited by high cost, low resolution, low purity or the risk of damage to biological particles. Microfluidics can accurately control fluid flow in channels with dimensions of tens of micrometres. Rapid microfluidics advancement has enabled precise sorting and isolating of nanoparticles with better resolution and efficiency than conventional technologies. This paper comprehensively studies the latest progress in microfluidic technology for submicron and nanoparticle manipulation. We first summarise the principles of the traditional techniques for manipulating nanoparticles. Following the classification of microfluidic techniques as active, passive, and hybrid approaches, we elaborate on the physics, device design, working mechanism and applications of each technique. We also compare the merits and demerits of different microfluidic techniques and benchmark them with conventional technologies. Concurrently, we summarise seven standard post-separation detection techniques for nanoparticles. Finally, we discuss current challenges and future perspectives on microfluidic technology for nanoparticle manipulation and separation.

Dynamic Behaviours of Monodisperse Double Emulsion Formation in a Tri-Axial Capillary Device.

We investigated experimentally, analytically, and numerically the formation process of double emulsion formations under a dripping regime in a tri-axial co-flow capillary device. The results show that mismatches of core and shell droplets under a given flow condition can be captured both experimentally and numerically. We propose a semi-analytical model using the match ratio between the pinch-off length of the shell droplet and the product of the core growth rate and its pinch-off time. The mismatch issue can be avoided if the match ratio is lower than unity. We considered a model with the wall effect to predict the size of the matched double emulsion. The model shows slight deviations with experimental data if the Reynolds number of the continuous phase is lower than 0.06 but asymptotically approaches good agreement if the Reynolds number increases from 0.06 to 0.14. The numerical simulation generally agrees with the experiments under various flow conditions.

Light emitting properties of Si+ self-ion implanted silicon-on-insulator from visible to infrared band.

The photoluminescence (PL) properties of silicon-on-insulator (SOI) samples, modified by the Si+ self-ion-implantation (SII) into Si thin film followed by annealing, have been well investigated. The well-known W-line can also be observed in SII SOI samples, its emitting behavior and structural evolution have been discussed in this article. The parallel PL pattern trend and the similar changes of temperature-dependent intensity suggest that luminescence center of I1 and I2 peaks located in the near-infrared band originates from the same interstitial-clusters (InCs). The PL peak at 1.762 eV can be ascribed to the quantum confinement (QC) from small-sized Si nanocrystals. Based on the electron spin resonance (ESR) experiments and the variation of normalized PL intensities at different annealing temperature (TA), the neutral oxygen vacancy (NOV) [O3≡Si-Si≡O3] is proposed to be responsible for the blue emission of P2 and P3 peaks, whose intensity can be restrained by the existence of the paramagnetic E1' defects [O3≡Si+]. The density of E1' defect is found to reduce with the increase of annealing temperature (TA). Our results provide a useful method to identify the origin of luminescence centers and pave a way for the application of new type optical defects on silicon based light emitting devices (LEDs).