RESUMEN
Electronic polarization plays a pivotal role in determining the molecular energy levels of organic semiconductors (OSCs) in the condensed phase. However, accurate estimation of the electronic polarization energy is a challenging task due to the intricate imbalance between the precision and efficiency. In this work, we have developed an embedding charge quantum mechanics/continuum dielectric (EC-QM/CD) model, which enables quantitative evaluation of the ionization potential (IP), electron affinity (EA), and polarization energy in both crystalline and amorphous solids for OSCs. The benchmark calculations on both p-type OSCs of oligoacenes and n-type OSCs of A-D-A small-molecule acceptors show that the values of IP, EA, and polarization energy obtained by EC-QM/CD are in good accordance with the experimental measurements or the results by high-precision methods, while the computational costs are substantially reduced. Given its balance between the accuracy and efficiency, the EC-QM/CD model exhibits considerable potential to broaden the applications in the field of OSCs, for instance, high-throughput screening by using solid-state energy levels or polarization energies as critical descriptors.
RESUMEN
A key challenge in the search of new materials capable of singlet fission (SF) arises from the primary energy conservation criterion, i.e., the energy of the triplet exciton has to be half that of the singlet (E(S1) ≥ 2E(T1)), which excludes most photostable organic materials from consideration and confines the design strategy to materials with low energy triplet states. One potential way to overcome this energy requirement and improve the triplet energy is to enable a SF channel from higher energy ("hot") excitonic states (Sn) in a process called activated SF. Herein, we demonstrate that efficient activated SF is achieved in a rylene imide-based derivative acenaphth[l, 2-a]acenaphthylene diimide (AADI). This process is enabled by an increase in the energy gap to greater than 1.0 eV between the S3 and S1 states due to the incorporation of an antiaromatic pentalene unit, which leads to the emergence of anti-Kasha properties in the isolated molecule. Transient spectroscopy studies show that AADI undergoes ultrafast SF from higher singlet excited states in thin film, with excitation wavelength-dependent SF yields. The SF yield of â¼200% is observed upon higher energy excitation, and long-lived free triplets persist on the µs time scale suggesting that AADI can be used in SF-enhanced devices. Our results suggest that enlarging the Sn-S1 energy gap is an effective way to turn on the activated SF channel and shed light on the development of novel, stable SF materials with high triplet energies.
RESUMEN
The energetic landscape of charge carriers, namely the ionization potential (IP) and electron affinity (EA), can play a crucial role in the charge separation and migration processes for organic solar cells (OSCs). However, the impact of molecular orientations on the energy levels remains elusive, especially in acceptor-donor-acceptor (A-D-A) type nonfullerene acceptors (NFAs) with intrinsic anisotropy. Using the self-consistent quantum mechanics/embedded charge (sc-QM/EC) approach, we have investigated the energy level shifts from the edge-on or face-on surfaces to the bulk phase for three typical NFA crystals, IDIC-4F, INIC-4F, and Y6. The results point out that the surface-to-bulk changes in IP are limited within 0.2 eV for both the orientations due to the mutual counteraction between the electrostatic and induction effects. In sharp contrast, the EA values are substantially decreased from the bulk to the surfaces; especially, for the face-on orientation, the reduction reaches 0.5-0.8 eV. This indicates that the face-on orientation can provide a significant driving force for electrons moving from the surface or the interface to the bulk phase and thus improve the charge separation efficiency. Our work indicates that enhancing the face-on orientation is an effective method to increase the charge separation driving force for the OSCs based on A-D-A NFAs.
RESUMEN
Polymerization of Y6-type acceptor molecules leads to bulk-heterojunction organic solar cells with both high power-conversion efficiency and device stability, but the underlying mechanism remains unclear. Here we show that the exciton recombination dynamics of polymerized Y6-type acceptors (Y6-PAs) strongly depends on the degree of aggregation. While the fast exciton recombination rate in aggregated Y6-PA competes with electron-hole separation at the donor-acceptor (D-A) interface, the much-suppressed exciton recombination rate in dispersed Y6-PA is sufficient to allow efficient free charge generation. Indeed, our experimental results and theoretical simulations reveal that Y6-PAs have larger miscibility with the donor polymer than Y6-type small molecular acceptors, leading to D-A percolation that effectively prevents the formation of Y6-PA aggregates at the interface. Besides enabling high charge generation efficiency, the interfacial D-A percolation also improves the thermodynamic stability of the blend morphology, as evident by the reduced device "burn-in" loss upon solar illumination.
RESUMEN
Polymer solar cells (PSCs) rely on a blend of small molecular acceptors (SMAs) with polymer donors, where thermodynamic relaxation of SMAs poses critical concerns on operational stability. To tackle this issue, tethered SMAs, wherein multiple SMA-subunits are connected to the aromatic-core via flexible chains, are proposed. This design aims to an elevated glass transition temperature (Tg) for a dynamical control. However, attaining an elevated Tg value with additional SMA subunits introduces complexity to the molecular packing, posing a significant challenge in realizing both high stability and power conversion efficiency (PCE). In this study, we initiate isomer engineering on the benzene-carboxylate core and find that meta-positioned dimeric BDY-ß exhibits more favorable molecular packing compared to its para-positioned counterpart, BDY-α. With this encouraging result, we expand our approach by introducing an additional SMA unit onto the aromatic core of BDY-ß, maintaining a meta-position relative to each SMA unit location in the tethered acceptor. This systematic aromatic-core engineering results in a star-shaped C3h-positioned molecular geometry. The supramolecular interactions of SMA units in the trimer contribute to enhancements in Tg value, crystallinity, and a red-shifted absorption compared to dimers. These characteristics result in a noteworthy increase in PCE to 18.24 %, coupled with a remarkable short-circuit current density of 27.06â mA cm-2. More significantly, the trimer-based devices delivered an excellent thermal stability with over 95 % of their initial efficiency after 1200â h thermal degradation. Our findings underscore the promise and feasibility of tethered trimeric structures in achieving highly ordered aggregation behavior and increased Tg value in PSCs, simultaneously improving in device efficiency and thermal stability.
RESUMEN
Controlling triplet states is crucial to improve the efficiency and lifetime of organic room temperature phosphorescence (ORTP). Although the intrinsic factors from intramolecular radiative and non-radiative decay have been intensively investigated, the extrinsic factors that affect triplet exciton quenching are rarely reported. Diffusion to the defect sites inside the crystal or at the crystal surface may bring about quenching of triplet exciton. Here, the phosphorescence lifetime is found to have a negative correlation with the triplet exciton diffusion coefficient based on the density functional theory (DFT)/time-dependent density functional theory (TD-DFT) calculations on a series of ORTP materials. For systems with a weak charge transfer (CT) characteristic, close π-π stacking will lead to strong triplet coupling and fast triplet exciton diffusion in most cases, which is detrimental to the phosphorescence lifetime. Notably, for intramolcular donor-acceptor (D-A) type systems with a CT characteristic, intermolecular D-A stacking results in ultra-small triplet coupling, thus contributing to slow triplet diffusion and long phosphorescence lifetime. These findings shed some light on molecular design toward high-efficiency long persistent ORTP.
RESUMEN
Giant molecular acceptors (GMAs) are typically designed through the conjugated linking of individual small molecule acceptors (SMAs). This design imparts an extended molecular size, elevating the glass transition temperature (Tg) relative to their SMA counterparts. Consequently, it effectively suppresses the thermodynamic relaxation of the acceptor component when blended with polymer donors to construct stable polymer solar cells (PSCs). Despite their merits, the optimization of their chemical structure for further enhancing of device performance remains challenge. Different from previous reports utilizing p-type linkers, here, we explore an n-type linker, specifically the benzothiadiazole unit, to dimerize the SMA units via a click-like Knoevenagel condensation, affording BT-DL. In comparison with B-DL with a benzene linkage, BT-DL exhibits significantly stronger intramolecular super-exchange coupling, a desirable property for the acceptor component. Furthermore, BT-DL demonstrates a higher film absorption coefficient, redshifted absorption, larger crystalline coherence, and higher electron mobility. These inherent advantages of BT-DL translate into a higher power conversion efficiency of 18.49 % in PSCs, a substantial improvement over the 9.17 % efficiency observed in corresponding devices with B-DL as the acceptor. Notably, the BT-DL based device exhibits exceptional stability, retaining over 90 % of its initial efficiency even after enduring 1000â hours of thermal stress at 90 °C. This work provides a cost-effective approach to the synthesis of n-type linker-dimerized GMAs, and highlight their potential advantage in enhancing intramolecular coupling for more efficient and durable photovoltaic technologies.
RESUMEN
The blend nanomorphology of electron-donor (D) and -acceptor (A) materials is of vital importance to achieving highly efficient organic solar cells. Exogenous additives especially aromatic additives are always needed to further optimize the nanomorphology of blend films, which is hardly compatible with industrial manufacture. Herein, we proposed a unique approach to meticulously modulate the aggregation behavior of NFAs in both crystal and thin film nanomorphology via self-regulation effect. Nonfullerene acceptor Z9 was designed and synthesized by tethering phenyl groups on the inner side chains of the Y6 backbone. Compared with Y6, the tethered phenyl groups participated in the molecular aggregation via the π-π stacking of phenyl-phenyl and phenyl-2-(5,6-difluoro-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (IC-2F) groups, which induced 3D charge transport with phenyl-mediated super-exchange electron coupling. Moreover, ordered molecular packing with suitable phase separation was observed in Z9-based blend films. High power conversion efficiencies (PCEs) of 19.0 % (certified PCE of 18.6 %) for Z9-based devices were achieved without additives, indicating the great potential of the self-regulation strategy in NFA design.
RESUMEN
The synthesis of anisotropic colloidal building blocks is essential for their self-assembly into hierarchical materials. Here, a highly efficient stabilizer-assisted liquid-crystallization-driven self-assembly (SA-LCDSA) strategy was developed to achieve monodisperse colloidal polymer rods. This strategy does not require the use of block copolymers, but only homopolymers or random copolymers. The resulting rods have tunable size and aspect ratios, as well as well-defined columnar liquid crystal structures. The integrated triphenylene units enable the rods to exhibit unusual photo-induced fluorescence enhancement and accompanying irradiation memory effect, which, as demonstrated, are attractive for information encryption/decryption of paper documents. In particular, unwanted document decryption during delivery can be examined by fluorescence kinetics. This SA-LCDSA-based approach can be extended to synthesize other functional particles with desired π-molecular units.
RESUMEN
The nonradiative energy loss (∆Enr) is a critical factor to limit the efficiency of organic solar cells. Generally, strong electron-phonon coupling induced by molecular motion generates fast nonradiative decay and causes high ∆Enr. How to restrict molecular motion and achieve a low ∆Enr is a sticking point. Herein, the free volume ratio (FVR) is proposed as an indicator to evaluate molecular motion, providing new molecular design rationale to suppress nonradiative decay. Theoretical and experimental results indicate proper proliferation of alkyl side-chain can decrease FVR and restrict molecular motion, leading to reduced electron-phonon coupling while maintaining ideal nanomorphology. The reduced FVR and favorable morphology are simultaneously obtained in AQx-6 with pinpoint alkyl chain proliferation, achieving a high PCE of 18.6% with optimized VOC, JSC and FF. Our study discovered aggregation-state regulation is of great importance to the reduction of electron-phonon coupling, which paves the way to high-efficiency OSCs.
RESUMEN
Non-benzenoid polycyclic aromatic hydrocarbons (PAHs) have received a lot of attention because of their unique optical, electronic, and magnetic properties, but their synthesis remains challenging. Herein, we report a non-benzenoid isomer of peri-tetracene, diazulenorubicene (DAR), with two sets of 5/7/5 membered rings synthesized by a (3+2) annulation reaction. Compared with the precursor containing only 5/7 membered rings, the newly formed five membered rings switch the aromaticity of the original heptagon/pentagon from antiaromatic/aromatic to non-aromatic/antiaromatic respectively, modify the intermolecular packing modes, and lower the LUMO levels. Notably, compound 2 b (DAR-TMS) shows p-type semiconducting properties with a hole mobility up to 1.27â cm2 â V-1 s-1 . Moreover, further extension to larger non-benzenoid PAHs with 19â rings was achieved through on-surface chemistry from the DAR derivative with one alkynyl group.
RESUMEN
High carrier mobility is beneficial to increase the active-layer thickness while maintaining a high fill factor, which is crucial to further improve the light harvesting and organic photovoltaic efficiency. The aim of this Perspective is to elucidate the electron transport mechanisms in prototypical non-fullerene (NF) acceptors through our recent theoretical studies. The electron transport in A-D-A small-molecule acceptors (SMAs), e.g., ITIC and Y6, is mainly determined by end-group π-π stacking. Relative to ITIC, the angular backbone along with more flexible side chains leads to Y6 having a closer stacking and enhanced intermolecular electronic connectivity. For polymerized rylene diimide acceptors, to achieve high electron mobilities, they need to simultaneously increase intramolecular and intermolecular connectivity. Finally, finely tuning the π-bridge modes to enhance intramolecular superexchange coupling is essential to develop novel polymerized A-D-A SMAs.
RESUMEN
Precise control of molecular assembly is of great significance in the application of functional molecules. This work has systematically investigated the humidity effect in bubble-assisted molecular assembly. This work finds humidity is critical in the evolution of the soft confined space, leading to the formation of microscale liquid confined space under high humidity, and nanoscale liquid confined space under low humidity. It is also revealed that the differences in surface wettability and adhesion play the key role. Consequently, a flat pattern with thermodynamically favorable ordered structure and a sharp pattern with dynamically favorable disordered structure are achieved, which show different solid-state photoisomerization behaviors and photoresponsiveness. Interestingly, conductivity of sharp pattern with disordered structure is higher than that of flat pattern with layered ordered structure due to electronic transport mechanism of different spatial dimensions. This work opens a new way for manipulating the molecular self-assembly to control the morphology and function of molecular patterns.
RESUMEN
Hybrid metal halides (HMHs) are a class of materials that combine extraordinary photophysical properties and excellent processability. Their chemical variability allows for the solid-liquid transition toward melt-processable HMHs. Herein, we report the design and synthesis of zero-dimensional HMHs [M(DMSO)6][SbCl6], where the isolated octahedra of [M(DMSO)6]3+ and [SbCl6]3- are alternatively aligned in the crystal structure. The luminescent center of [SbCl6]3- enables the photogeneration of self-trapped excitons, resulting in broadband photoluminescence with a large Stokes shift and a nearly 100% quantum yield. Meanwhile, the release of DMSO ligands from [M(DMSO)6]3+ is controlled by the M-O coordination and thus a low melting point of â¼90 °C is achieved for HMHs. Interestingly, the glass phase is obtained by melt quenching, with a sharp change in photoluminescence colors compared to the crystal phase of melt-processable HMHs. The robust crystal-liquid-glass transition opens a new avenue to tailoring structural disorder and optoelectronic performance in organic-inorganic materials.
RESUMEN
Emissive organic semiconductors are highly demanding for organic light-emitting transistors (OLETs) and electrically pumped organic lasers (EPOLs). However, it remains a great challenge to obtain organic semiconductors with high carrier mobility and high photoluminescence quantum yield simultaneously. Here, a new design strategy is reported for highly emissive ambipolar and even n-type semiconductors by introducing perfluorophenyl groups into polycyclic aromatic hydrocarbons such as perylene and anthracene. The results reveal that 3,9-diperfluorophenyl perylene (5FDPP) exhibits the ambipolar semiconducting property with hole and electron mobilities up to 0.12 and 1.89 cm2 V-1 s-1 , and a photoluminescence quantum yield of 55%. One of the crystal forms of 5FDPA exhibits blue emission with an emission quantum yield of 52% and simultaneously shows the n-type semiconducting property with an electron mobility up to 2.65 cm2 V-1 s-1 , which is the highest value among the reported organic emissive n-type semiconductors. Furthermore, crystals of 5FDPP are utilized to fabricate OLETs by using Ag as source-drain electrodes. The electroluminescence is detected in the transporting channels with an external quantum efficiency (EQE) of up to 2.2%, and the current density is up to 145 kA cm-2 , which are among the highest values for single-component OLETs with symmetric electrodes.
RESUMEN
Low energy loss is a prerequisite for organic solar cells to achieve high photovoltaic efficiency. Electron-vibration coupling (i. e., intramolecular reorganization energy) plays a crucial role in the photoelectrical conversion and energy loss processes. In this Concept article, we summarize our recent theoretical advances on revealing the energy loss mechanisms at the molecular level of A-D-A electron acceptors. We underline the importance of electron-vibration couplings on reducing the energy loss and describe the effective molecular design strategies towards low energy loss through decreasing the electron-vibration couplings.
RESUMEN
Reducing the exciton binding energy Eb of organic photoactive materials is critical to minimize the energy loss and improve the photovoltaic efficiency of organic solar cells. However, the relation between the Eb and molecular packing is not well understood. Herein, the Eb in the crystals of a series of A-D-A type nonfullerene acceptors with different lengths of alkyl side chains has been examined by self-consistent quantum mechanics/embedded charge calculations. The variation of molecular packing induced by the different alkyl chains can have an important impact on the polarization effect of charge carriers and thereby the Eb. More interestingly, the Eb values are found to be linearly increased with the ratio of the void fraction vs the packing coefficient of molecular backbones in the solid crystals. Owing to the smallest ratio, a remarkable low Eb of several tens of meV is achieved for the acceptor with an optimal length of alkyl chains.
RESUMEN
In contrast to the inorganic and perovskite solar cells, organic photovoltaics (OPV) depend on a series of charge generation and recombination processes, which complicates molecular design to improve the power conversion efficiencies (PCEs). Herein, we first propose the singlet-triplet energy gap (ΔEST ) as a critical molecular descriptor for predicting the PCE considering that minimizing ΔEST is beneficial to simultaneously reduce voltage loss and triplet recombination. Remarkably, the results from data-driven machine learning verify that the prediction accuracy of the ΔEST (Pearson's correlation coefficient r=0.72) is apparently superior to that of two commonly used molecular descriptors in OPV, i.e., the optical gap (r=0.65) and the driving force (r=0.53). Moreover, an impressive prediction accuracy of r=0.81 is achieved just by combining the three descriptors. This work paves the way toward rapid and precise screening of efficient OPV materials.
RESUMEN
Doping is of great importance to tailor the electrical properties of semiconductors. However, the present doping methodologies for organic semiconductors (OSCs) are either inefficient or can only apply to some OSCs conditionally, seriously limiting their general applications. Herein, a novel p-doping mechanism is revealed by investigating the interactions between the dopant trityl tetrakis(pentafluorophenyl) borate (TrTPFB) and poly(3-hexylthiophene) (P3HT). It is found that electrophilic attack of the trityl cations on thiophenes results in the formation of tritylated thiophenium ions, which subsequently induce electron transfer from neighboring P3HT chains to realize p-doping. This unique p-doping mechanism enables TrTPFB to p-dope various OSCs including those with high ionization energy (IE ≈ 5.8 eV). Moreover, this doping mechanism endows TrTPFB with strong doping capability, leading to doping efficiency of over 80% in P3HT. The discovery and elucidation of this novel doping mechanism not only points out that strong electrophiles are a class of efficient p-dopants for OSCs, but also provides new opportunities toward highly efficient doping of various OSCs.
RESUMEN
Energy loss caused by exciton binding energy (Eb) has become a key factor that restricts further advancement of organic solar cells (OSCs). Herein, we used transient mid-IR spectroscopy to study direct photogeneration of free charge carriers in small-molecule acceptors (SMAs) Y6 and IDIC as well as polymerized SMAs (PSMAs) PYFT and PZ1. We found that free carrier concentration is higher in PSMAs than in their corresponding SMAs, indicating reduced exciton Eb, which is then confirmed by ultraviolet photoelectron spectroscopy, low-energy inverse photoemission spectroscopy, and film absorption spectra measurements. The measured Eb values of PYFT and PZ1 are 0.24 and 0.37 eV, respectively, smaller than those of Y6 (0.32 eV) and IDIC (0.47 eV). This work not only provides a method to directly monitor the photogenerated free carriers in OSC materials but also demonstrates that polymerization is an effective strategy to reduce the Eb, which is crucial to decrease the energy losses in high-performance OSCs.