Fabrication of Luteolin Nanoemulsion by Box-Behnken Design to Enhance its Oral Absorption Via Lymphatic Transport.

Intestinal lymphatic transport offers an alternative and effective way to deliver drugs, such as avoiding first-pass metabolism, enhancing oral bioavailability, and facilitating the treatment of targeted lymphoid-related diseases. However, the clinical use of luteolin (LUT) is limited by its poor water solubility and low bioavailability, and enhancing lymphatic transport by nanoemulsion may be an efficient way to enhance its oral bioavailability. The objective of this work is to prepare the luteolin nanoemulsions (LUT NEs), optimized its preparation parameters by using Box-Behnken design optimization (BBD) and evaluated it in vitro and in vivo. An Caco-2 / Raji B cell co-incubation monolayer model was established to simulate the M-cell pathway, and the differences in the transmembrane transport of LUT and NEs were compared. Cycloheximide (CHX) was utilized to establish rat chylomicron (CM) blocking model, and for investigating the influence of pharmacokinetic parameters in rats thereafter. The results showed that LUT NEs have good stability, the particle sizes were about 23.87 ± 0.57 nm. Compared with LUT suspension, The Papp of LUT NEs was enhanced for 3.5-folds, the oral bioavailability was increased by about 2.97-folds. In addition, after binding with chylomicron, the oral bioavailability of LUT NEs was decreased for about 30% (AUC 0-∞ (µg/L*h): 5.356 ± 1.144 vs 3.753 ± 0.188). These results demonstrated that NEs could enhance the oral absorption of luteolin via lymphatic transport routes.

Oral Bioavailability Enhancement of Poorly Soluble Drug by Amorphous Solid Dispersion Using Sucrose Acetate Isobutyrate.

The focus of the present work was to develop amorphous solid dispersion (ASD) formulation of aprepitant (APT) using sucrose acetate isobutyrate (SAIB) excipient, evaluate for physicochemical attributes, stability, and bioavailability, and compared with hydroxypropyl methylcellulose (HPMC) based formulation. Various formulations of APT were prepared by solvent evaporation method and characterized for physiochemical and in-vivo performance attributes such as dissolution, drug phase, stability, and bioavailability. X-ray powder diffraction indicated crystalline drug conversion into amorphous phase. Dissolution varied as a function of drug:SAIB:excipient proportion. The dissolution was more than 80% in the optimized formulation (F10) and comparable to HPMC based formulation (F13). Stability of F10 and F13 formulations stored at 25 C/60% and 40°C/75% RH for three months were comparable. Both ASD formulations (F10 and F13) were bioequivalent as indicated by the pharmacokinetic parameters Cmax and AUC0-∞. Cmax and AUC0-∞ of F10 and F13 formulations were 2.52 ± 0.39, and 2.74 ± 0.32 µg/ml, and 26.59 ± 0.39, and 24.79 ± 6.02 µg/ml.h, respectively. Furthermore, the bioavailability of ASD formulation was more than twofold of the formulation containing crystalline phase of the drug. In conclusion, stability and oral bioavailability of SAIB based ASD formulation is comparable to HPMC-based formulation of poorly soluble drugs.

Design and Evaluation of Inorganic/Organic Hybrid Bio-composite for Site-Specific Oral Delivery of Darifenacin.

Benign hyperplasia (BHP) is a common disorder that affects men over the age of 60 years. Transurethral resection of the prostate (TURP) is the gold standard for operative treatment, but a range of drugs are also available to improve quality of life and to reduce BHP-associated urinary tract infections and complications. Darifenacin, an anti-muscarinic agent, has been found effective for relieving symptoms of overactive bladder associated with BHP, but the drug has poor solubility and bioavailability, which are major challenges in product development. An inorganic/organic bio-composite with gastric pH-resistant property was synthesized for the targeted oral delivery of Darifenacin to the lower gastrointestinal tract (GIT). This development was accomplished through co-precipitation of calcium carbonate in quince seed-based mucilage. The FTIR, XRD, DSC, and TGA results showed good drug-polymer compatibility, and the SEM images showed calcite formation in the quince hydrogel system. After 72 h, the drug release of 34% and 75% were observed in acidic (0.1N HCl) and 6.8 pH phosphate buffer, respectively. A restricted/less drug was permeated through gastric membrane (21.8%) as compared to permeation through intestinal membrane (65%.) The developed composite showed significant reduction in testosterone-induced prostatic hyperplasia (2.39 ± 0.12***) as compared to untreated diseased animal group. No sign of organ toxicity was observed against all the developed composites. In this study, we developed an inorganic-organic composite system that is highly biocompatible and effective for targeting the lower GIT, thereby avoiding the first-pass metabolism of darifenacin.

Hydrogel delivery systems of functional substances for precision nutrition.

Hydrogel delivery systems based on polysaccharides and proteins have the ability to protect functional substances from chemical degradation, control/target release, and increase bioavailability. This chapter summarizes the recent progress in the utilization of hydrogel delivery systems for nutritional interventions. Various hydrogel delivery systems as well as their preparation, structure, and properties are given. The applications for the encapsulation, protection, and controlled delivery of functional substances are described. We also discuss their potential and challenges in managing chronic diseases such as inflammatory bowel disease, obesity, liver disease, and cancer, aiming at providing theoretical references for exploring novel hydrogel delivery systems and their practical prospects in precise nutritional interventions.

Nanoparticle delivery systems of functional substances for precision nutrition.

Foodborne functional substances have received much attention for their functional benefits in health and disease. However, these substances are easily affected by the adverse environment during production, transportation, or storage. They will also be damaged by the gastric environment and limited by the mucosal barrier after entering the human body, thus affecting the bioavailability of functional substances in the body. The construction of nanoparticle delivery systems is helpful to protect the biological activity of functional substances and improve their solubility, stability, and absorption of substances. Responsive delivery systems help control the release of functional substances in specific environments and targeted sites to achieve nutritional intervention, disease prevention, and treatment. In this chapter, the main types of foodborne functional substances and their commonly used delivery systems were reviewed, and the application of delivery systems in precision nutrition was described from the aspects of environmental stimuli-responsive delivery systems, site-specific delivery systems, and disease-targeted delivery systems.

Luteolin-loaded Invasomes Gel for Transdermal Delivery: Development, Optimization, in-vitro, and Preclinical Evaluation.

Luteolin (LN), is an herbal bioactive flavone and exhibits many pharmacological activities. However, the bioavailability of LN is limited due to its inadequate solubility and significant first-pass metabolism. The present study developed transdermal LN-loaded invasomes (IVM) gel to improve the therapeutic efficacy. The LN-IVM was prepared and optimized by 2 3 factorial designs. LN-IVM was characterized for physicochemical parameters. The optimized LN-IVM (LN-IVMopt) was incorporated into HPMC-K4M gel and evaluated for viscosity, spreadability, and irritation. Further LN-IVM gel was evaluated for drug release, ex-vivo permeation, pharmacokinetic and pharmacodynamics study. LN-IVMopt showed 300.8±2.67 nm of VS, 0.258 of PDI, 89.92±1.29% of EE, and a zeta potential of -18.2 mV. LN-IVM exhibited spherical morphology. FTIR and XRD results demonstrated that LN was encapsulated into IVM matrix. The optimized IVM gel (LN-IVMoptG2) exhibited excellent viscosity, spreadability, and sustained release of LN (91.32±2.95% in 24 h). LN-IVMoptG2 exhibited statistically significant (p < 0.05) higher flux (5.79 µg/h/cm2 ) than LN-gel (2.09 µg/h/cm2 ). The apparent permeability coefficient of plain LN gel and LN- IVMoptG was 1.15×10-5 cm/min and 3.22×10-5 cm/min respectively. LN-IVMoptG2 showed no irritation (score 0.0) throughout the study (60 min). The relative bioavailability of LN from LN-IVMopt-G2 (transdermal) was 2.38±0.19 fold as compared to LN-Sus (oral) and 1.81±0.15-fold than plain LN-gel (transdermal). The LN-IVMoptG2 showed a substantial lessening in the paw volume up to 12 h (17.48±1.94% swelling) than plain LN-gel (44.77±2.82% swelling). The finding concluded that the IVM gel is a novel, effective, and safe approach for the delivery of LN transdermally to improve its therapeutic efficacy.

High Bioavailability of Spinach Folate Evaluated by Functional Biomarkers in a Folate Depletion-Repletion Mouse Model.

The bioavailability of natural folates is 50% lower than that of synthetic folic acid (FA); however, it remains unclear whether this value is universally applicable to all foods. Therefore, the present study investigated the bioavailability of folate from spinach using multiple biomarkers in a folate depletion-repletion mouse model. Mice were fed a folate-deficient diet for 4 wk and subsequently divided into three groups: folate-deficient, FA, and spinach folate. The folate repletion group received either FA or spinach folate at 2 mg/kg diet for 9 d. On the 7th day of repletion, half of each group underwent low-dose total body X-ray irradiation to induce chromosomal damage in bone marrow. Folate bioavailability biomarkers included measurements of folate levels in plasma, liver, and bone marrow along with an analysis of plasma homocysteine levels and chromosome damage, both of which are functional biomarkers of body folate. The consumption of a folate-deficient diet led to decreased tissue folate levels, increased plasma homocysteine levels, and chromosomal damage. Repletion with spinach folate restored folate levels in plasma, liver, and bone marrow to 69, 13, and 68%, respectively, of FA levels. Additionally, spinach folate repletion reduced plasma homocysteine levels and chromosome damage to 83% and 93-117%, respectively, of FA levels. Collectively, the present results demonstrated that the bioavailability of spinach folate exceeded 83% of FA, particularly when assessed using functional biomarkers.

Liposomes delivery systems of functional substances for precision nutrition.

Natural bioactive compounds with antioxidant, antimicrobial, anticancer, and other biological activities are vital for maintaining the body's physiological functions and enhancing immunity. These compounds have great potential as nutritional therapeutic agents, but they can be limited due to their poor flavor, color, unstable nature, and poor water solubility, and degradation by gastrointestinal enzymes. Liposomes, as ideal carriers, can encapsulate both water-soluble and fat-soluble nutrients, enhance the bioavailability of functional substances, promote the biological activity of functional substances, and control the release of nutrients. Despite their potential, liposomes still face obstacles in nutrient delivery. Therefore, the design of liposomes for special needs, optimization of the liposome preparation process, enhancement of liposome encapsulation efficiency, and industrial production are key issues that must be addressed in order to develop food-grade liposomes. Moreover, the research on surface-targeted modification and surface functionalization of liposomes is valuable for expanding the scope of application of liposomes and achieving the release of functional substances from liposomes at the appropriate time and site. The establishment of in vivo and in vitro digestion models of nutrient-loaded liposomes, in-depth study of gastrointestinal digestive behavior after liposome ingestion, targeted nutrient release, and deciphering the nutritional intervention of human diseases and positive health promotion are promising fields with broad development prospects.

Biological activity, limitations and steady-state delivery of functional substances for precision nutrition.

Food-related functional substances with biological activity serve as a crucial material foundation for achieving precision nutrition, which has gained increasing attraction in regulating physiological functions, preventing chronic diseases, and maintaining human health. Nutritional substances typically include bioactive proteins, peptides, polysaccharides, polyphenols, functional lipids, carotenoids, probiotics, vitamins, saponins, and terpenes. These functional substances play an essential role in precise nutrition. This chapter introduces and summarizes typical functional substances to demonstrate the challenges in precision nutrition for their stability, solubility, and bioavailability. The current status of delivery systems of functional substances is described to give an insight into the development of desirable characteristics, such as food grade status, high loading capacity, site targeting, and controlled release capacity. Finally, the applications of food-borne delivery systems of functional substances for precision nutrition are emphasized to meet the requirement for precision nutrition during nutritional intervention for chronic diseases.

Emulsions delivery systems of functional substances for precision nutrition.

Many functional substances are chemically unstable and exhibit variable water/oil solubility, reducing their bioavailability and efficacy. It is necessary to devise effective measures to improve the unfavorable properties of functional substances and maximize their potential benefits in nutritional interventions. Therefore, the development and application of edible emulsion-based delivery systems for these functional substances using food-grade materials would be highly beneficial for the food industry. In recent years, Pickering emulsions have garnered significant attention in the scientific community due to their characteristic of being free from surfactants. This section focuses on emphasizing the design and preparation of emulsion delivery systems based on functional substances. Additionally, we summarize the current applications of emulsion delivery systems in functional substances. This chapter also discusses the potential advantages of Pickering emulsion systems in the precise nutrition field, including high targeting specificity and nutritional intervention for various diseases. Well-designed Pickering emulsion delivery carriers for functional substances can enhance their stability in food processing and in vivo digestion. To meet the nutritional needs of specific populations for functional foods, utilizing emulsion delivery systems to improve the bioavailability of functional substances will provide a theoretical basis for the precise nutrition of functional substances in functional foods.

Torsemide Crystalline Salts with a Significant Spring-Parachute Effect.

Torsemide is a long acting pyridine sulfonylurea diuretic. Torsemide hydrochloride is widely used now, there are only a few organic acid salts reported. Cocrystallization with organic acids is an effective way to improve its solubility. Here, we reported maleate and phthalate of torsemide, in which the organic acid lost a proton transferring to the pyridine of torsemide, and torsemide interacted with organic acid through N+ - H⋯O- hydrogen bond to form salts crystal. Surprisingly, maleate showed a clear "spring" pattern in apparent solubility, whereas phthalate had a "spring-parachute" effect. Both crystalline salts kept a higher solubility than torsemide without falling. The "spring-parachute" effect of crystalline salts promoted rapid dissolution of torsemide and kept a high concentration, thereby increasing its bioavailability.

Acrylamide and HMF occurrence and bioaccessibility in instant coffee and coffee substitutes. A study on isolated and milk-combined beverages.

This research evaluated the occurrence and bioaccessibility of acrylamide and HMF in commercial instant coffees (IC) and coffee substitutes (CS), considering both isolated consumption and combination with milk. There were no significant differences in acrylamide content between IC and CS samples (median: 589 vs. 671 µg/kg), but higher variability was reported for CS, probably due to their varied composition (roasted cereals, nuts, honey, dehydrated fruits, and/or chicory). Acrylamide level were always below the EU benchmark for each category. HMF contents were similar between both groups (1354-5127 mg/kg for IC and 735-7134 mg/kg for CS; median: 2890 vs. 2960 mg/kg), with no clear ingredient relationship. Since IC consumption by the Spanish population is ten times higher than that of CS, exposure to acrylamide and HMF was higher from IC (6.8 vs. 1.07 ng/kg body weight/day for acrylamide; 39.1 vs. 4.2 µg/kg body weight/day for HMF). The standardized in vitro gastrointestinal digestion protocol (INFOGEST) was used. The gastrointestinal process reduced the bioaccessibility of acrylamide up to 27.2 % in IC and to 22.4 % in CS, regardless of the presence of milk. HMF bioaccessibility from IC significantly dropped after the gastrointestinal digestion, whereas it greatly increased for CS. The presence of milk did not affect HMF bioaccessibility. These results highlight the importance of assessing food bioaccessibility in typical consumption scenarios, providing a holistic view and a realistic evaluation of the potential risks associated with acrylamide and HMF exposure in the diet.

Bioaccessibility of carotenoids, tocochromanols, and iron from common bean (Phaseolus vulgaris L.) landraces.

Common beans (Phaseolus vulgaris L.) are among the most important legumes for human nutrition. The aim of the present study was to characterize the composition and in vitro bioaccessibility of tocochromanols, carotenoids, and iron from 14 different landraces and 2 commercial common bean varieties. Phytic acid, dietary fiber, and total (poly)phenolic content were determined as factors that can modify the bioaccessibility of the studied compounds. Two carotenoids were identified, namely lutein (4.6-315 ng/g) and zeaxanthin (12.2-363 ng/g), while two tocochromanols were identified, namely γ-tocopherol (2.62-18.01 µg/g), and δ-tocopherol (0.143-1.44 µg/g). The iron content in the studied samples was in the range of 58.7-144.2 µg/g. The contents of carotenoids, tocochromanols, and iron differed significantly among the studied samples but were within the ranges reported for commercial beans. After simulated gastrointestinal digestion, the average bioaccessibility of carotenoids was 30 %, for tocochromanols 50 %, and 17 % for iron. High variability in the bioaccessible content yielded by the bean varieties was observed. Dietary fiber, phytic acid and total (poly)phenol contents were negatively correlated with the bioaccessibility of carotenoids, while iron bioaccessibility was negatively correlated with the total (poly)phenol content. The principal component analysis indicated that the bioaccessibility of lutein was the main variable involved in class separations. The composition of the food matrix plays an important role in the bioaccessibility of carotenoids, tocochromanols and iron from cooked beans.

Micellar delivery systems of bioactive compounds for precision nutrition.

Rapid changes in lifestyle and the increasingly hectic pace of life have led to a rise in chronic diseases, such as obesity, inflammatory bowel disease, liver disease, and cancer, posing significant threats to public health. In response to these challenges, precision nutrition (PN) has emerged as a secure and effective intervention aiming at human health and well-being. Bioactive compounds (bioactives), including carotenoids, polyphenols, vitamins, and polyunsaturated fatty acids, exhibit a range of beneficial properties, e.g., antioxidant and anti-inflammatory effects. These properties make them promising candidates for preventing or treating chronic diseases and promoting human health. However, bioactives might have different challenges when incorporated into food matrices and oral administration, including low water solubility, poor physiochemical stability, and low absorption efficiency. This limits them to achieve the health benefits in the body. Numerous strategies have been developed and utilized to encapsulate and deliver bioactives. Micellar delivery systems, due to their unique core-shell structure, play a pivotal role in improving the stability, solubility, and bioavailability of these bioactives. Moreover, through innovative design strategies, micellar delivery systems can be tailored to offer targeted and controlled release, thus maximizing the potential of bioactives in PN applications. This chapter reveals details about the preparation methods and properties of micelles and highlights the strategies to modulate the properties of polymeric micelles. Afterwards, the application of polymeric micelles in the delivery of bioactives and the corresponding PN, including controlled release, organ-targeting ability, and nutritional intervention for chronic disease are summarized.

Berberine and magnolol exert cooperative effects on ulcerative colitis in mice by self-assembling into carrier-free nanostructures.

The risk of ulcerative colitis (UC) is increasing worldwide with limited success using classical drugs, which has underscored the development of novel agents. Recently, carrier-free molecular assembly has been proven to be an effective drug delivery system, but it has yet to be examined for UC drug development using phytochemicals. Based on traditional Chinese medicine compatibility and potential medicinal uses, a pair of natural compounds, berberine (BBR) and magnolol (MAG), were found to self-assemble into nanostructures in aqueous solutions. Spectral analysis revealed that the assembly mechanisms of BBR and MAG were mediated through charge interactions and π-π stacking. Pharmacokinetic studies and animal imaging showed that BBR-MAG self-assembly (BM) effectively promoted the oral bioavailability and biodistribution of BBR in the colon. BM exhibited superior effects in regulating inflammatory factors, maintaining colon barrier integrity, and regulating gut microbiota in a dextran sulfate sodium salt-induced colitis mouse model. Additionally, no apparent signs of toxicity were observed, suggesting that BM has a favorable safety profile. This study presents a new strategy for UC management and highlights the cooperative effects of combined phytochemicals.

Revealing Changes in Celecoxib Nanostructured Lipid Carrier's Bioavailability Using Hyaluronic Acid as an Enhancer by HPLC-MS/MS.

Purpose: Oral drug administration is the most common and convenient route, offering good patient compliance but drug solubility limits oral applications. Celecoxib, an insoluble drug, requires continuous high-dose oral administration, which may increase cardiovascular risk. The nanostructured lipid carriers prepared from drugs and lipid excipients can effectively improve drug bioavailability, reduce drug dosage, and lower the risk of adverse reactions. Methods: In this study, we prepared hyaluronic acid-modified celecoxib nanostructured lipid carriers (HA-NLCs) to improve the bioavailability of celecoxib and reduce or prevent adverse drug reactions. Meanwhile, we successfully constructed a set of FDA-compliant biological sample test methods to investigate the pharmacokinetics of HA-NLCs in rats. Results: The pharmacokinetic analysis confirmed that HA-NLCs significantly enhanced drug absorption, resulting in an AUC0-t 1.54 times higher than the reference formulation (Celebrex®). Moreover, compared with unmodified nanostructured lipid carriers (CXB-NLCs), HA-NLCs enhance the retention time and improve the drug's half-life in vivo. Conclusion: HA-NLCs significantly increased the bioavailability of celecoxib. The addition of hyaluronic acid prolonged the drug's in vivo duration of action and reduced the risk of cardiovascular adverse effects associated with the frequent administration of oral celecoxib.

Modeling and comparison of dissolution profiles for different brands of albendazole boluses.

BACKGROUND: Addressing critical veterinary drugs, especially drugs with solubility problems like albendazole, and their implications for therapeutic efficacy, in-vitro dissolution studies can indeed provide valuable insights into how different brands of albendazole boluses perform under standardized conditions, helping to assess their dissolution profiles and potential bioavailability. METHODS: Six brands of albendazole 300 mg boluses were collected from December 2020 to May 2021 G.C. The laboratory work was conducted from December 2020 to May 2021 in the National Animal Products and Veterinary Drugs and Feed Quality Assessment Centre (APVD-FQAC) laboratories. The collected brands from government veterinary clinics and private veterinary shops were subjected to model independent and dependent parameters. The dissolution test was conducted according to the USP monograph. RESULTS: The study found that none of the six brands met the requirements of the dissolution test, as their API release was less than 80% within the specified 60-minute timeframe according to USP standards. Model independence indicated that only one brand (Alb002 = 3.72) achieved a difference factor of ≤ 15%. The remaining four brands (4/6) did not meet this criterion. However, the similarity factor (f2) revealed that all five brands (5/6) were comparable to the comparator products, with f2 values of [Formula: see text]50%. The mean dissolution time results confirmed that three brands (3/6) had the highest dissolution rate and the fastest onset of action. The model-dependent kinetics indicated that the Weibull and Korsemeyer-Peppas models were the best fit for the release of drug substances. CONCLUSION: The study highlights issues with albendazole boluses' quality, highlighting the need for national in-vitro dissolution studies. These recommendations could improve quality control, streamline regulatory frameworks, and offer practical, cost-effective methods for evaluating drug efficacy and safety, ensuring veterinary pharmaceuticals meet safety and efficacy standards.

Advanced Application of Polymer Nanocarriers in Delivery of Active Ingredients from Traditional Chinese Medicines.

Active ingredients from Traditional Chinese Medicines (TCMs) have been a cornerstone of healthcare for millennia, offering a rich source of bioactive compounds with therapeutic potential. However, the clinical application of TCMs is often limited by challenges such as poor solubility, low bioavailability, and variable pharmacokinetics. To address these issues, the development of advanced polymer nanocarriers has emerged as a promising strategy for the delivery of TCMs. This review focuses on the introduction of common active ingredients from TCMs and the recent advancements in the design and application of polymer nanocarriers for enhancing the efficacy and safety of TCMs. We begin by discussing the unique properties of TCMs and the inherent challenges associated with their delivery. We then delve into the types of polymeric nanocarriers, including polymer micelles, polymer vesicles, polymer hydrogels, and polymer drug conjugates, highlighting their application in the delivery of active ingredients from TCMs. The main body of the review presents a comprehensive analysis of the state-of-the-art nanocarrier systems and introduces the impact of these nanocarriers on the solubility, stability, and bioavailability of TCM components. On the basis of this, we provide an outlook on the future directions of polymer nanocarriers in TCM delivery. This review underscores the transformative potential of polymer nanocarriers in revolutionizing TCM delivery, offering a pathway to harness the full therapeutic potential of TCMs while ensuring safety and efficacy in a modern medical context.

Improving the Solubility, Stability, and Bioavailability of Albendazole through Synthetic Salts.

Albendazole (ABZ) is a highly effective yet poorly water-soluble antiparasitic drug known to form salts (ABZ-FMA, ABZ-DTA, and ABZ-HCl) with fumaric acid (FMA), D-tartaric acid (DTA), and hydrochloric acid (HCl). This research utilized a range of analytical techniques, including Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance hydrogen spectroscopy (1H NMR), powder X-ray diffraction (PXRD), dynamic vapor sorption (DVS), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM), to validate and characterize the solid-state properties of these drug salts. This study also assessed the solubility and intrinsic dissolution rate (IDR) of these salts under different pH conditions compared to the active pharmaceutical ingredient (API) and conducted stability studies. Moreover, the in vivo pharmacokinetic performance of ABZ salt was evaluated. The results of this study reveal that the new solid form of ABZ is primarily associated with amino acid esters and benzimidazole groups, forming intermolecular interactions. All three ABZ salts significantly improved the solubility and dissolution rate of ABZ, with ABZ-HCl demonstrating the optimal performance. Importantly, the drug salt exhibited robust physical stability when exposed to adverse conditions, including strong light irradiation (4500 ± 500 lux), high humidity (92.5 ± 5% relative humidity), elevated temperatures (50 ± 2 °C), and accelerated test conditions (40 °C/75 ± 5% relative humidity). Lastly, the in vivo pharmacokinetic analysis demonstrated that ABZ salt led to a substantial increase in AUC(0-24) and Cmax compared to ABZ. This elevation in solubility in aqueous solvents signifies that ABZ salt exhibits characteristics that can enhance oral bioavailability and pharmacokinetics. These findings provide potential solutions for the development of more effective and innovative drug formulations.

Polyphenols: Secondary Metabolites with a Biological Impression.

Polyphenols are natural compounds which are plant-based bioactive molecules, and have been the subject of growing interest in recent years. Characterized by multiple varieties, polyphenols are mostly found in fruits and vegetables. Currently, many diseases are waiting for a cure or a solution to reduce their symptoms. However, drug or other chemical strategies have limitations for using a treatment agent or still detection tool of many diseases, and thus researchers still need to investigate preventive or improving treatment. Therefore, it is of interest to elucidate polyphenols, their bioactivity effects, supplementation, and consumption. The disadvantage of polyphenols is that they have a limited bioavailability, although they have multiple beneficial outcomes with their bioactive roles. In this context, several different strategies have been developed to improve bioavailability, particularly liposomal and nanoparticles. As nutrition is one of the most important factors in improving health, the inclusion of plant-based molecules in the daily diet is significant and continues to be enthusiastically researched. Nutrition, which is important for individuals of all ages, is the key to the bioactivity of polyphenols.