Vacuum-Assisted Eggshell-Type Bone Debridement with Implantation of Antibiotic-Impregnated Bone Substitute for Treatment of Calcaneal Osteomyelitis with Subsequent Charcot's Reconstruction: A Case Report.

Charcot's neuroarthropathy complicated by calcaneal osteomyelitis can be difficult to treat. Various surgical techniques describe how to manage these conditions. Eggshell-type debridement with application of antibiotic-impregnated bone substitute is a viable option that eliminates infected bone and allows staged reconstructive surgery. A 50-year-old woman with right midfoot Charcot's neuroarthropathy presented with osteomyelitis of the cuboid and fourth and fifth metatarsal bases after resection and failed antibiotic therapy. The patient eventually developed adductovarus, septic shock, and hematogenous osteomyelitis of the calcaneus, navicular, and lateral cuneiform. Vacuum-assisted eggshell-type debridement was performed, and the calcaneal defect was filled with antibiotic-impregnated calcium sulfate and calcium phosphate. Eight weeks after the initial surgery, the infection resolved; however, the patient had trouble walking. She underwent staged Charcot's reconstructive surgery with application of a dynamic multiplanar external fixator with gradual deformity and split-thickness skin graft to cover the residual plantar lateral foot wound. The second stage included septic fusion of the midfoot and subtalar joint from the frame. Twelve weeks postoperatively, radiographic union was achieved, the external fixator was removed, and the patient demonstrated a plantigrade foot. She was transitioned to a total-contact cast and allowed to bear weight as tolerated. Eighteen months after the initial procedure, the patient is wound-free and weightbearing in a CROW boot. This innovative eggshell-type debridement technique aspirates osteomyelitic cancellous bone while preserving cortical bone. It can be particularly useful in hematogenous osteomyelitis, where cortical integrity is not breached, or in situations where there is minimal cortical involvement. Specifically preserving the calcaneus, a major weightbearing bone, permits subsequent reconstructive surgical planning. At 18 months, there were no signs of osteomyelitis recurrence.

Highly efficient recovery of phosphate and fluoride from phosphogypsum leachate: Selective precipitation and adsorption.

Phosphogypsum, a typical by-product in the phosphorus chemical industry, could generate a large amount of leachate containing phosphate and fluoride in the process of rainfall and long-term stacking, which not only causes serious environmental pollution, but also leads to a waste of resources. In this study, a united treatment of calcium hydroxide precipitation and lanthanum zeolite (La-ZFA) adsorption was proposed to achieve the recovery of phosphate and fluoride from phosphogypsum leachate. In phosphogypsum, most phosphorus could be leached except P in the residual occurrence form, while for fluoride, only water-soluble F could be effectively leached. The optimum leaching amounts of phosphate and fluoride were 22.59 and 4.64 mg/g, respectively, at liquid-solid ratio of 400:1, leaching time of 120 min, pH of 6.0, particle size of >200 mesh (<0.075 mm), and leaching temperature of 25°C. Using Ca(OH)2 as the precipitant, the phosphate could be precipitated selectively from phosphogypsum leachate by controlling pH and time, and the concentrations of it decreased significantly to 0.29 mg/L at pH 10.0, with a removal efficiency of 99.48%. XRD, SEM and Visual MINTEQ software analysis proved that the main component of the precipitate was hydroxyapatite (Ca5(PO4)3(OH)). After P precipitation, a series of sorbents for fluoride were investigated, and La-ZFA sorbent was chosen and utilized to recover the fluoride from the leachate through a cyclic fixed-bed column. The efficiency of La-ZFA was basically not affected by the high concentration sulfate, and it can selectively adsorb fluoride from phosphogypsum leachate, leading to a final fluoride concentration of 0.29 mg/L in the effluent. The characterization demonstrated that fluoride might be adsorbed onto the La-ZFA via ligand exchange with hydroxy groups. The proposed method in this study is expected to sequentially recover phosphate and fluorine from the leachate of phosphogypsum, and it has great guiding significance for resource utilization and management of phosphogypsum.

Enhanced solidification/stabilization (S/S) of fluoride in smelting solid waste-based phosphogypsum cemented paste backfill utilizing biochar: Mechanisms and performance assessment.

Phosphogypsum (PG) cemented paste backfill (CPB) is a primary non-hazardous method for treating PG. However, using traditional binders like cement increases global carbon emissions and mining operational costs while complicating the reduction of fluoride leaching risks. This study introduces a novel PG-based CPB treatment method using steel slag (SS) and ground granulated blast furnace slag (GGBFS) as binders, calcium oxide as an exciter, with biochar serving as a fluoride-fixing agent. We investigated the effect of biochar addition on the hydration and solidification/stabilization (S/S) of fluoride in SS and GGBFS-PG-based materials (SSPC). The results indicated that the optimal strength and performance for fluoride S/S were achieved with a biochar addition of 0.2 wt%. Compared to the control group without biochar, the strength increased by 54.3%, and F leaching decreased by 39.4% after 28 days of curing for SSPC. The addition of 0.2 wt% biochar facilitated heterogeneous nucleation and acted as a microfiller, enhancing SSPC's properties. However, excessive biochar reduced the compactness of SSPC. Additionally, the distribution of fluoride was strongly correlated with P, Ca, Fe, and Al, suggesting that fluoride S/S is linked to the formation of stable hydration products like fluorapatite, fluorite, and complexes such as [AlF6]3- and [FeF6]3-. These findings offer a promising approach for the safe treatment of PG and the beneficial reuse of solid waste from SS and GGBFS.

Research on the expansion, shrinkage properties and fracture evolution of red clay stabilised with phosphogypsum under dry-wet cycles.

In view of the special engineering properties of red clay and the waste of phosphogypsum resources, the expansion and contraction deformation and fissure evolution of phosphogypsum stabilized red clay under different conditions were investigated by laboratory tests and image processing system. The research results show that: (1) the absolute expansion and absolute shrinkage of phosphogypsum stabilized red clay are positively correlated with the compaction degree, the number of dry and wet cycles and the cement dosage, and negatively correlated with the initial water content and the phosphogypsum dosage; (2) the fissure rate increases with the increase of the number of dry and wet cycles, and decreases with the increase of the initial water content, the compaction degree, the cement, and the phosphogypsum dosage; (3) The relationship among absolute expansion rate (absolute shrinkage), degree of compaction and fracture rate can be fitted by the equation f(x,y) = ax+by+cx2+dy2+e; (4) Phosphogypsum has an obvious inhibiting effect on the expansion, shrinkage and cracking of the mix. It is recommended that the cement mixing amount of 6% and phosphogypsum: red clay = 1:1~1:2 as roadbed filler.

Identification and quantitative detection of illegal additives in wheat flour based on near-infrared spectroscopy combined with chemometrics.

As a common food raw material in daily life, the quality and safety of wheat flour are directly related to people's health. In this study, a model was developed for the rapid identification and detection of three illegal additives in flour, namely azodicarbonamide (ADA), talcum powder, and gypsum powder. This model utilized a combination of near-infrared spectroscopy with chemometric methods. A one-dimensional convolutional neural network was used to reduce data dimensionality, while a support vector machine was applied for non-linear classification to identify illegal additives in flour. The model achieved a calibration set F1 score of 99.38% and accuracy of 99.63%, with a validation set F1 score of 98.81% and accuracy of 98.89%. Two cascaded wavelength selection methods were introduced: The first method involved backward interval partial least squares (BiPLS) combined with an improved binary particle swarm optimization algorithm (IBPSO). The second method utilized the CARS-IBPSO algorithm, which integrated competitive adaptive reweighted sampling (CARS) with IBPSO. The two cascade wavelength selection methods were used to select feature wavelengths associated with additives and construct partial least squares quantitative detection models. The models constructed using CARS-IBPSO selected feature wavelengths for detecting ADA, talcum powder, and gypsum powder exhibited the highest overall performance. The model achieved validation set determination coefficients of 0.9786, 0.9102, and 0.9226, with corresponding to root mean square errors of 0.0024%, 1.3693%, and 1.6506% and residual predictive deviations of 6.8368, 3.5852, and 3.9253, respectively. Near-infrared spectroscopy in combination with convolutional neural network dimensionality reduction and support vector machine classification enabled rapid identification of various illegal additives. The combination of CARS-IBPSO feature wavelength selection and partial least squares regression models facilitated rapid quantitative detection of these additives. This study introduces a new approach for rapidly and accurately identifying and detecting illegal additives in flour.

Selective Chiral Interactions between Hydrophilic/Hydrophobic Amino Acids and Growing Gypsum Crystals.

In nature, selective interactions between chiral amino acids and crystals are important for the formation of chiral biominerals and provide insight into the mysterious origin of homochirality. Here, we show that chiral amino acids with different hydrophilicities/hydrophobicities exhibit different chiral selectivity preferences in the dynamically growing gypsum [001] steps. Hydrophilic amino acids show a chiral selectivity preference for their d-isomers, whereas hydrophobic amino acids prefer their l-isomers. These differences in chiral recognition can be attributed to the different stereochemical matching between the hydrophilic and hydrophobic amino acids on the [001] steps of growing gypsum. These different chiral selectivities resulting from the amino acid hydrophilicity/hydrophobicity are confirmed by the experimental crystallization investigations from nano regulation on dynamic steps, to microscopic modification of gypsum morphology, and to macroscopic precipitation. Furthermore, as the hydrophilicity of amino acids increases, the disparity in chiral selection rises; conversely, the increase in the hydrophobicity of amino acids results in a decline in chiral selection. These insights improve our understanding of the interaction mechanism between amino acids and crystals and provide insights into the formation process of chiral biominerals and the origin of homochirality in nature.

Assessment of metal(loid) and natural radionuclide pollution in surface sediments of an estuary affected by mining and phosphogypsum releases.

The prolonged impact over the Tinto River estuary by both the significant pollution by acid mine drainage (AMD) affecting this river and the polluted releases from phosphogypsum (PG) piles has led to the severe environmental degradation of this ecosystem. The aim of this work was to assess the current environmental quality of the Tinto River estuary through the study of the spatial distribution of metal(loid)s and natural radionuclides in the surface sediments from the channel edge. The sediments contain mean concentrations 5-20 times higher than the background values for pollutants such as Zn, As, Cu, Pb, or U, and up to two orders of magnitude higher for P. The studied sediments are heavily polluted by toxic heavy metals and metalloids (Pb, Zn, Cu, and As) according to the US EPA guidelines. Most of the analyzed sediment samples are also strongly polluted by long-lived natural radionuclides, mainly U-isotopes and 210Pb with concentrations up to one order of magnitude higher than unpolluted sediments, mostly due to the contribution by the PG leachates. The enrichment factors (EF) were extremely high (EF > 50) for As and very severe enrichment (25 ≤ EF < 50) for P, Cd, Zn, Cu, and Pb.

Treating waste with waste: adsorption behavior and mechanism of phosphate in water by modified phosphogypsum biochar.

The use of green methods to treat industrial waste and waste reuse has become a key environmental issue. In order to achieve this goal, this study treated waste phosphogypsum (PG) and produced modified PG biochar to adsorb and remove phosphorus from PG leachate, so that the PG pollution problem was controlled. In this study, PG was modified with sodium carbonate (Na2CO3) to prepare a modified PG biochar that was used for the removal of phosphorus-containing wastewater. An X-ray diffraction (XRD) analysis of the modified PG revealed that the main component was calcium carbonate (CaCO3), and a suitable amount of modified PG could load calcium oxide (CaO) onto the biochar and improve its physical properties. The experimental results showed that the modified PG biochar had a maximum phosphorus adsorption capacity of 132 mg/g. A further investigation of the mechanism of adsorption revealed the importance of electrostatic attraction and chemical precipitation, and it was found that the CaO in the modified PG biochar could effectively facilitate the conversion of phosphate to hydroxylapatite (Ca5(PO4)3OH) in water. The phosphorus removal rate from leachate obtained from a landfill containing PG was 99.38% for a specific dose of the modified PG biochar. In this study, a PG pollution control technology was developed to realize the goal of replacing waste with waste.

Novel insights into vancomycin-loaded calcium sulfate and negative pressure wound therapy in preventing infections in open fractures.

BACKGROUND: Open fractures are challenging due to susceptibility to Staphylococcus aureus infections. This study examines the impact of Vancomycin-Loaded Calcium Sulfate (VLCS) and negative pressure wound therapy (NPWT) on macrophage behavior in enhancing healing and infection resistance. Both VLCS and NPWT were evaluated individually and in combination to determine their effects on macrophage polarization and infection resistance in open fractures. METHODS: Through single-cell RNA sequencing, genomic expressions in macrophages from open fracture patients treated with VLCS and NPWT were compared to a control group. The analysis focused on MBD2 gene changes related to macrophage polarization. RESULTS: Remarkable modifications in MBD2 expression in the treatment group indicate a shift towards M2 macrophage polarization. Additionally, the combined treatment group exhibited greater improvements in infection resistance and healing compared to the individual treatments. This shift suggests a healing-promoting atmosphere with improved infection resilience. CONCLUSIONS: VLCS and NPWT demonstrate the ability to alter macrophage behavior toward M2 polarization, which is crucial for infection prevention in open fractures. The synergistic effect of their combined use shows even greater promise in enhancing outcomes in orthopedic trauma care.

Vermicompost and flue gas desulfurization gypsum addition to saline-alkali soil decreases nitrogen losses and enhances nitrogen storage capacity by lowering sodium concentration and alkalinity.

Saline-alkali soils have poor N storage capacity, high N loss and inadequate nutrient supply potential, which are the main limiting factors for crop yields. Vermicompost can increase organic nutrient content, improve soil structure, and enhance microbial activity and function, and the Ca2+ in flue gas desulfurization (FGD) gypsum can replace Na+ and neutralize alkalinity in saline-alkali soils though chemical improvement. This study aimed to determine if vermicompost and FGD gypsum addition could improve the N storage capacity through decreasing NH3 volatilization and 15N/NO3- leaching from saline-alkali soils. The results indicate that the combined application of vermicompost and FGD gypsum led to the displacement and leaching Na+ in the upper soil layer (0-10 cm), as well as the neutralization of HCO3- by the reaction with Ca2+. This treatment also improved soil organic matter content and macroaggregate structure. Also, these amendments significantly increased the abundance of nifH and amoA genes, while concurrently decreasing the abundance of nirK gene. The structural improvements and the lowering of Na + concentration in and alkalinity decreased cumulative NH3 volatilization, and leaching of 15N and NO3- to the deep soil layer (20-30 cm). FGD gypsum increased the 15N stocks and inorganic N stocks of saline-alkali soil, whereas vermicompost not only increased the 15N and inorganic N stocks, but also increased the total N stocks, the combination of vermicompost and FGD gypsum can not only increase the available N storage capacity, but also enhance the potential for N supply. Therefore, vermicompost and FGD gypsum decrease N loss and increase N storage capacity through structural improvement, and lowering of Na+ concentration and alkalinity, which is crucial for improving the productivity of saline-alkali soil.

Assessment of the mobility of potentially toxic trace elements (PTEs) and radionuclides released in soils stabilized with mixtures of bentonite-lime-phosphogypsum.

Phosphogypsum (PG) is a solid by-product of the phosphate industry, rich in contaminants and produced in large quantities. Raw materials and stabilized specimens, consisting of bentonite-lime-PG mixtures, were characterized by mineralogical, microstructural, chemical, alpha-particle, and gamma-ray spectrometry analysis before hydration and after hardening. Compressive strength and leaching tests were performed on hardened specimens. The physicochemical parameters and chemical composition of leachates from raw materials and hardened specimens were determined. PG contains high concentrations of natural radionuclides, specially from U series. Uranium-238 activities are double in PG than the worldwide average for soil values. The mobility of PTEs from PG is Cd (2.43%), Zn (2.36%), Ni (2.07%), Cu (1.04%), Pb (0.25%), and As (0.21%). Cadmium is the cation most easily released by PG in water with a concentration 0.0316 mg kg-1. When PG is added to bentonite-lime mixture, cadmium is no longer released. The radionuclide 238,234U and 210Po predominates in the leachates of PG. However, the activity of 210Po becomes negligible in the leachates of bentonite-lime-PG mixtures. The addition of PG to bentonite-lime mixtures facilitates the trapping of trace elements (PTEs) and radionuclides, providing potential applications for PG as road embankments and fill coatings.

Effect of inert dust on the mortality of Sitophilus zeamais (Coleoptera: Curculionidae).

The maize weevil, Sitophilus zeamais Motschulsky, 1855 (Coleoptera: Curculionidae), generally reaches pest status in stored grain. Chemical control is the most used method for population suppression, which can cause adverse impacts, thus creating a need for alternatives such as using inert powders. The present work aims to verify the effect of different concentrations of different types of inert powders on the mortality of S. zeamais in the laboratory. To this end, the experiments were carried out in a completely randomized design, with 13 treatments and four replications, ten adults per replication, where the effect of different inert powders (basalt powder, gypsum powder, and diatomaceous earth) was tested at concentrations of 0.025 g, 0.05 g, 0.1 g and 0.2 g/20 g of corn grains. Variance, normality, and homoscedasticity tests were applied in addition to controlling efficiency (CE%), median lethal time (TL50), and survival curves. All treatments caused mortality in S. zeamais, and all concentrations with diatomaceous earth were more efficient, with 100% mortality at 20 days, followed by the treatment of 0.2 g of gypsum powder/20 g of corn grains, with superior efficiency, to 95% in 20 days and 100% in 30 days. The results indicated that treatments with diatomaceous earth had the highest mortality rate and the best average survival time.

[A brief history of the use of Gypsum in orthopedics].

Humans processed gypsum for their everyday use at least 7000 years ago. They have been using fixed limb methods for fracture treatment for nearly 5000 years. Hippocrates recognized the importance of the splint and the "roller bandage" for fracture treatment, and made the bandage hard by adding wax, pitch, lard or resin to the multi-layer cloth bandage, but not gypsum. Arabian physician El Zahrawi (936 -1013) also described a clay glue mixture, and flour and egg white as fracture fixation materials. From 970, Persian physician Muwafak used gypsum as the exclusive material for fracture fixation. The rudimentary form of modern plaster bandages was developed in the mid-19th century and spread widely after that, using methods from the Russian Pyrogov by soaking canvas in a gypsum slurry and Dutchman Massson wrapped gypsum powder in cotton cloth strips.

Prophylactic absorbable antibiotic beads for prepectoral implant-based breast reconstruction: A single institution early experience.

Infection after implant-based breast reconstruction remains challenging, with infection rates up to 24%. Best clinical practice indicates prophylactic oral antibiotics are ineffective at preventing infection. Absorbable antibiotic beads have been routinely used in other surgical subspecialties such as orthopedic and vascular procedures for continuous local antibiotic delivery to the surgical site when implants are placed. Biodegradable calcium sulfate antibiotic beads have been shown to normalize incidence of infection when used prophylactically for a high-risk prepectoral patient population. The purpose of this study is to evaluate the effect of prophylactic biodegradable antibiotic beads when used non-selectively for all prepectoral immediate tissue expander (TE) reconstruction. Patients who underwent mastectomy and immediate prepectoral TE reconstruction on the same day between 2018 and 2024 were reviewed. Patients were divided into two groups: those who received antibiotic beads (Group 1) and those who did not (Group 2). Absorbable calcium-sulfate beads were reconstituted with 1 g vancomycin and 240 mg gentamicin. There were 33 patients (63 TEs) in Group 1 and 330 patients (545 TEs) in Group 2. TE loss was present in 1.5% (1/65 TEs) Group 1 compared to 9.4% (51/545 TEs) in Group 2 (p = 0.032). The mean follow-up time was 178 days (range 93-266 days). Prophylactic biodegradable antibiotic beads used during immediate tissue expander reconstruction decreased implant loss rate. There was one occurrence of SSI in the antibiotic bead group. Antibiotic beads may potentially decrease complications in immediate TE reconstruction when used non-selectively for all patients.

Feasibility and Preliminary Efficacy of α-Calcium Sulfate Hemihydrate in Socket Preservation: Protocol for a Pilot Randomized Controlled Trial.

BACKGROUND: Tooth extraction procedures often lead to bone resorption, which can have adverse effects on the dimensions of the alveolar ridge. Research has shown that socket preservation techniques using bone graft substitutes can effectively minimize early bone loss in such cases. α-calcium sulfate hemihydrate (α-CSH) has garnered significant attention as a potential bone graft material due to its favorable properties, including osteoconductivity, angiogenic potential, and biocompatibility. Considering these facts, we developed a preliminary protocol for applying α-CSH in addressing alveolar bone loss following tooth extraction. OBJECTIVE: This research's general objective is to evaluate the feasibility and initial effectiveness of α-CSH as bone-inducing graft material for socket preservation after tooth extraction. METHODS: This preliminary clinical trial will involve 30 fresh extraction sockets from individuals aged 18-35 years. The participants will be divided into 2 groups: one group will receive α-CSH graft material after tooth extraction for socket preservation, while the other group will not receive any graft material. Throughout the study, the participants will be closely monitored for safety measures, which will include clinical examinations, radiographic imaging, and blood tests. Radiographic imaging will be used extensively to assist the progress of bone formation. RESULTS: The study commenced enrollment in August 2022 and is scheduled to conclude post assessments and analyses by the end of 2023. The results of the study are anticipated to be accessible in late 2024. CONCLUSIONS: This clinical study represents the initial investigation in humans to assess the feasibility and efficacy of α-CSH in alveolar bone regeneration. We hypothesize that the inclusion of α-CSH can greatly expedite the process of bone formation within fresh sockets, resulting in a swift restoration of bone height without the disadvantages associated with harvesting autogenous bone graft. TRIAL REGISTRATION: Indonesia Registry Center INA-D02FAHP; https://tinyurl.com/2jnf6n3s. INTERNATIONAL REGISTERED REPORT IDENTIFIER (IRRID): DERR1-10.2196/49922.

Comparative analysis of cyanobacterial communities in gypsum outcrops: insights from sites in Israel and Poland.

Today, the biodiversity of endolithic microbial colonisations are only partly understood. In this study, we used a combination of molecular community metabarcoding using the 16S rRNA gene, light microscopy, CT-scan analysis, and Raman spectroscopy to describe gypsum endolithic communities in 2 sites-southern Poland and northern Israel. The obtained results have shown that despite different geographical areas, climatic conditions, and also physical features of colonized gypsum outcrops, both of these sites have remarkably similar microbial and pigment compositions. Cyanobacteria dominate both of the gypsum habitats, followed by Chloroflexi and Pseudomonadota. Among cyanobacteria, Thermosynechococcaceae were more abundant in Israel while Chroococcidiopsidaceae in Poland. Interestingly, no Gloeobacteraceae sequences have been found in Poland, only in Israel. Some of the obtained 16S rRNA gene sequences of cyanobacteria matched previously detected sequences from endolithic communities in various substrates and geographical regions, supporting the hypothesis of global metacommunity, but more data are still needed. Using Raman spectroscopy, cyanobacterial UV-screening pigments-scytonemin and gloeocapsin have been detected alongside carotenoids, chlorophyll a and melanin. These pigments can serve as potential biomarkers for basic taxonomic identification of cyanobacteria. Overall, this study provides more insight into the diversity of cyanobacterial endolithic colonisations in gypsum across different areas.

Fabrication and histological evaluation of a self-setting granular cement using calcium sulfate hemihydrate granules with different pore distribution.

Granular type of bone substitutes is currently used in the field of dentistry to restore alveolar bone defects. However, the migration of the granules from the implantation site is still an unresolved issue. In this study, the feasibility to fabricate self-setting calcium sulfate hemihydrate (CSH) granules using different ranges of loading pressure: CSH(0), CSH(50), CSH(100), and CSH(150) was investigated with the hypothesis that CSH granules with reduced microporosity can inhibit the rapid dissolution rate of the calcium sulfate dihydrate (CSD) set blocks and induce bone regeneration. After 4 weeks of implantation, the granules were mostly replaced with new bone although no significant differences were observed. Nevertheless, the granules demonstrated the ability to set within the bone defect. It is therefore concluded that the setting ability of calcium sulfate can contribute to address the issue of migration of the granules and provide a useful guide for designing setting bone substitutes.

Gypsum Cave Biofilm Communities are Strongly Influenced by Bat- And Arthropod-Related Fungi.

The Gypsum Karst of Sorbas, Almeria, southeast Spain, includes a few caves whose entrances are open and allow the entry and roosting of numerous bats. Caves are characterized by their diversity of gypsum speleothems, such as stalactites, coralloids, gypsum crusts, etc. Colored biofilms can be observed on the walls of most caves, among which the Covadura and C3 caves were studied. The objective was to determine the influence that bat mycobiomes may have on the fungal communities of biofilms. The results indicate that the fungi retrieved from white and yellow biofilms in Covadura Cave (Ascomycota, Mortierellomycota, Basidiomycota) showed a wide diversity, depending on their location, and were highly influenced by the bat population, the guano and the arthropods that thrive in the guano, while C3 Cave was more strongly influenced by soil- and arthropod-related fungi (Ascomycota, Mortierellomycota), due to the absence of roosting bats.

Potential of artificial soil preparation for vegetation restoration using red mud and phosphogypsum.

Red mud and phosphogypsum have long been a focus and challenge in global industrial waste management, and their low-cost and large-scale utilization technology has always been an urgent need. This study is based on the strong acid-base neutralization reaction between red mud and phosphogypsum, which contain an elemental composition similar to that of natural soil, red mud itself has characteristic of clay minerals, and other auxiliary materials (i.e. rice husk powder, bentonite, fly ash, polyacrylamide flocculant and microbial suspension) were added, so as to explore the potential of synergistically prepared artificial soil for vegetation restoration. The results showed that the artificial soils exhibited physicochemical characteristics (e.g., pH, moisture content, cation exchange capacity) similar to those of natural soil, along with abundant organic matter, nitrogen, phosphorus, and potassium contents, meeting the growth requirements of plants. The artificial soils were able to support favorable growth of suitable plants (e.g., sunflower, wheat, rye grass), accumulating high levels of diverse enzymatic activities, comparable to those in natural soils (e.g., catalase, urease, phosphatase), or even surpassing natural soils (e.g., sucrase), and rich microorganism communities, such as Cyanobacteria, Proteobacteria, Actinobacteria in the bacteria domain, and Ascomycota in the fungi domain, were initially developed. It's suggested that preparing 1 ton of artificial soil entails synergistic consumption of 613.7 kg of red mud and 244.6 kg of phosphogypsum, accounting for mass proportions of 61.4 % and 24.5 %, respectively. In future, more evaluations on the leaching loss of nutrients and alkalinity and the environmental risks of heavy metals should be conducted to more references for the artificial soil application. In summary, the preparation of artificial soil is a very simple, efficient, scalable and low-cost collaborative resource utilization scheme of red mud and phosphogypsum, which has great potential for vegetation restoration in some places such as tailings field and soil-deficient depression.

Synergistic effects of Co-pyrolysis on the immobilization and transformation of lead (Pb), chromium (Cr), nickel (Ni), and fluorine (F) in phosphogypsum-biomass mixtures.

Co-pyrolysis of biomass with phosphogypsum (PG) presents an effective strategy for facilitating the recycling of PG resources. However, it is crucial to note the environmental threats arising from the presence of Pb, Cr, Ni, and F in PG. This study investigated the effect of immobilization and transformation of four elements during co-pyrolysis with biomass and its components. The co-pyrolysis experiments were carried out in a tube furnace with a mixture of PG and corn stover (CS), cellulose (C), lignin (L), glucose (G). Co-pyrolysis occurred at varying temperatures (600 °C, 700 °C, 800 °C, and 900 °C) and different addition ratios (10%, 15%, and 20%). The results indicated that an increase in co-pyrolysis temperature was more conducive to the immobilization and transformation of harmful elements in PG, demonstrating significant efficacy in controlling F. Additionally, the addition of biomass components exerts a significant impact on inhibiting product toxicity, with small molecules such as glucose playing a prominent role in this process. The mechanism underlying the control of harmful elements during co-pyrolysis of PG and biomass was characterized by three main aspects. Firstly, biomass components have the potential to melt-encapsulate the harmful elements in PG, leading to precipitation. Secondly, the pyrolysis gas produced during the co-pyrolysis process contributes to the formation of a rich pore structure in the product. Finally, this process aids in transforming hazardous substances into less harmful forms and stabilizing these elements. The findings of this study are instrumental in optimizing the biomass and PG blend to mitigate the environmental impact of their co-pyrolysis products.