Folic acid in carboxymethylcellulose/polyethylene oxide electrospun nanofibers: preparation, release and stability.

BACKGROUND: Folic acid (FA), a synthetically produced compound analogous to vitamin B9, also referred to as vitamin folate, is an essential compound in human health and faces challenges in stability during food processing. This study explores the incorporation of FA into carboxymethylcellulose (CMC) nanofibers using electrospinning to enhance its stability. RESULTS: In this study, optimization of both electrospinning and solution parameters facilitated the fabrication of nanofibers. Furthermore, incorporating FA into CMC/polyethylene oxide (PEO) nanofibers resulted in thinner fibers, with an average diameter of 88 nm, characterized by a flat shape and smooth surface. Fourier transform infrared spectroscopic analysis demonstrated substantial hydrogen bonding interactions between FA and the polar groups present in CMC. This interaction contributed to an encapsulation efficiency of 94.5%, with a yield exceeding 87%. Thermal analysis highlighted mutual interference between CMC and PEO, with FA enhancing the thermal stability and reducing the melting temperatures and enthalpies of PEO, while also increasing the reaction heats of CMC. The encapsulated FA remained stable in acidic conditions, with only 6% degradation over 30 days, demonstrating the efficacy of CMC/PEO nanofibers in safeguarding FA against acidic environments. Moreover, the nanofibers provided a protective barrier against UV radiation, thereby preserving the stability of FA. CONCLUSION: This study emphasizes the efficacy of CMC/PEO nanofibers as a protective matrix against FA degradation. The findings indicate that this innovative approach could significantly diversify the applications of FA in food fortification, addressing concerns regarding its vulnerability to temperature and hydrolysis reactions during food processing. © 2024 Society of Chemical Industry.

Non-clinical toxicity and immunogenicity evaluation of a Plasmodium vivax malaria vaccine using Poly-ICLC (Hiltonol®) as adjuvant.

Malaria caused byPlasmodium vivaxis a pressing public health problem in tropical and subtropical areas.However, little progress has been made toward developing a P. vivaxvaccine, with only three candidates being tested in clinical studies. We previously reported that one chimeric recombinant protein (PvCSP-All epitopes) containing the conserved C-terminus of the P. vivax Circumsporozoite Protein (PvCSP), the three variant repeat domains, and aToll-like receptor-3 agonist,Poly(I:C), as an adjuvant (polyinosinic-polycytidylic acid, a dsRNA analog mimicking viral RNA), elicits strong antibody-mediated immune responses in mice to each of the three allelic forms of PvCSP. In the present study, a pre-clinical safety evaluation was performed to identify potential local and systemic toxic effects of the PvCSP-All epitopes combined with the Poly-ICLC (Poly I:C plus poly-L-lysine, Hiltonol®) or Poly-ICLC when subcutaneously injected into C57BL/6 mice and New Zealand White Rabbits followed by a 21-day recovery period. Overall, all observations were considered non-adverse and were consistent with the expected inflammatory response and immune stimulation following vaccine administration. High levels of vaccine-induced specific antibodies were detected both in mice and rabbits. Furthermore, mice that received the vaccine formulation were protected after the challenge with Plasmodium berghei sporozoites expressing CSP repeats from P. vivax sporozoites (Pb/Pv-VK210). In conclusion, in these non-clinical models, repeated dose administrations of the PvCSP-All epitopes vaccine adjuvanted with a Poly-ICLC were immunogenic, safe, and well tolerated.

Pressurized liquid extraction of bioactive compounds from grape peel and application in pH-sensing carboxymethyl cellulose films: A promising material to monitor the freshness of pork and milk.

This study produced pH-sensing carboxymethyl cellulose (CMC) films functionalized with bioactive compounds obtained by pressurized liquid extraction (PLE) of grape peel to monitor the freshness of pork and milk. A semi-continuous PLE was conducted using hydroethanolic solution (70:30, v/v) at a flow rate of 5 mL/min, 15 MPa, and 60 °C. The films were produced by the casting technique using CMC (2.5 %, w/v), glycerol (1 %, v/v), and functionalized with 10, 30, and 50 % (v/v) grape peel extract. From the results obtained, LC-MS/MS revealed that PLE extracted twenty-seven phenolic compounds. The main phenolic compounds were kaempferol-3-glucoside (367.23 ± 25.88 µg/mL), prunin (270.23 ± 3.62 µg/mL), p-coumaric acid (236.43 ± 26.02 µg/mL), and procyanidin B1 (117.17 ± 7.29 µg/mL). The CMC films presented suitable color and mechanical properties for food packaging applications. The addition of grape peel extract promoted the pH-sensing property, showing the sensitivity of anthocyanins to pH changes. The films functionalized with grape peel extract presented good release control of bioactive compounds, making them suitable for food packaging applications. When applied to monitor the freshness of pork and milk, the films exhibited remarkable color changes associated with the pH of the food during storage. In conclusion, PLE is a sustainable approach to obtaining bioactive compounds from the grape peel, which can be applied in the formulation of pH-sensing films as a promising sustainable material to monitor food freshness during storage.

Chronological analysis of periodontal bone loss in experimental periodontitis in mice.

OBJECTIVES: Periodontal disease is understood to be a result of dysbiotic interactions between the host and the biofilm, causing a unique reaction for each individual, which in turn characterizes their susceptibility. The objective of this study was to chronologically evaluate periodontal tissue destruction induced by systemic bacterial challenge in known susceptible (BALB/c) and resistant (C57BL/6) mouse lineages. MATERIAL AND METHODS: Animals, 6-8 weeks old, were allocated into three experimental groups: Negative control (C), Gavage with sterile carboxymethyl cellulose 2%-without bacteria (Sham), and Gavage with carboxymethyl cellulose 2% + Porphyromonas gingivalis (Pg-W83). Before infection, all animals received antibiotic treatment (sulfamethoxazole/trimethoprim, 400/80 mg/5 mL) for 7 days, followed by 3 days of rest. Microbial challenge was performed 3 times per week for 1, 2, or 3 weeks. After that, the animals were kept until the completion of 42 days of experiments, when they were euthanized. The alveolar bone microarchitecture was assessed by computed microtomography. RESULTS: Both C57BL/6 and BALB/c mice exhibited significant bone volume loss and lower trabecular thickness as well as greater bone porosity compared to the (C) and (Sham) groups after 1 week of microbial challenge (p < .001). When comparing only the gavage groups regarding disease implantation, time and lineage, it was possible to observe that within 1 week of induction the disease was more established in BALB/c than in C57BL/6 (p < .05). CONCLUSIONS: Our results reflected that after 1 week of microbial challenge, there was evidence of alveolar bone loss for both lineages, with the loss observed in BALB/c mice being more pronounced.

Experimental evaluation of the use of starch and carboxymethylcellulose in the prevention of intraperitoneal adhesions in hernia surgery with coated meshes.

PURPOSE: Laparoscopic hernia repair involves a risk of adhesion between coated mesh and viscera. Plant polysaccharides such as starch and carboxymethylcellulose (SC) make up a product that acts as a barrier and prevents intraperitoneal adhesions. This study aimed to evaluate whether topical SC can also reduce adhesions between mesh and intra-abdominal organs. METHODS: Forty rats each received placement of two intraperitoneal mesh fragments, one on each side of the abdominal wall. Randomly, 20 animals received SC on the right and other 20 on the left, leaving the contralateral side as a control. Fourteen days after the surgery, the animals underwent an additional laparotomy in which macroscopic analysis was performed. RESULTS: As for the percentage of the mesh area affected by adhesion, one (2.6%) animal had > 75% adhesion on the experimental side, and 11 animals (28.9%) on the control side. The adhesion intensity score showed firm adhesions in three (7.9%) animals on the experimental side and nine (23.7%) on the control side. CONCLUSIONS: The use of SC decreased the intensity of adhesions and the surface area of the mesh affected by adhesions. There was no negative interference of the product in the incorporation of the mesh into the abdominal wall.

AQUACEL® Ag Advantage reduces the stress of postoperative packing removal after endoscopic sinus surgery.

OBJECTIVE: After Endoscopic Sinus Surgery (ESS), packing plays an important role in wound healing and hemostasis. However, the effect of the packing removal procedure on physician stress has not been evaluated. The purpose of this study was to evaluate physician stress during packing removal for patients treated with AQUACEL® Ag Advantage versus KALTOSTAT®. METHODS: This retrospective study included 15 patients who underwent packing with ESS for chronic rhinosinusitis performed at two centers; 9 were treated with AQUACEL® Ag Advantage and 6 were treated with KALTOSTAT®. Physician stress during packing removal was evaluated with the National Aeronautics and Space Administration-Task Load Index (NASA-TLX). The time required to remove the packing and the number of instruments used in the procedure were recorded. Postoperative bleeding (Boezaart bleeding score) and wound healing were graded. Patient symptoms on the day after surgery and pain during packing removal were assessed using a visual analog scale. RESULTS: Computed tomography scores, asthma complications, and blood eosinophil counts were significantly higher in the AQUACEL® Ag Advantage group. Patient symptoms on the day after surgery were not significantly different between the two groups. Physician stress during the task of packing removal was significantly lower in the AQUACEL® Ag Advantage group than in the KALTOSTAT® group (35.5 vs. 81.0, p=0.016) according to the NASA-TLX scores. The number of instruments used in the procedure was significantly lower in the AQUACEL® Ag Advantage group than in the KALTOSTAT® group (3.0 vs. 6.0, p=0.015). There were no significant differences in procedure time for packing removal, postoperative bleeding, wound healing, or patient pain at the time of packing removal between the groups. CONCLUSION: Physicians feel stressed about packing removal. In addition, AQUACEL® Ag Advantage is useful for packing after ESS, requiring fewer instruments for the procedure than KALTOSTAT® and reducing physician stress about the procedure. LEVEL OF EVIDENCE: Level 3.

Testicular toxicity in mice exposed to terephthalic acid in utero and during lactation.

Terephthalic acid (TPA) is a worldwide aromatic compound widely used to manufacture resins and the raw material for the polymerization reaction with ethylene glycol to produce polyethylene terephthalate, known as PET. The use of TPA extends to the synthesis of phthalates, plasticizers used in various industrialized products such as toys and cosmetics. The present study aimed to evaluate the testicular toxicity of terephthalic acid on male mice exposed in utero and during lactation to TPA in different developmental windows. The animals were treated intragastric with TPA at stock dispersal dosages corresponding to 0.0014 g/ml and 0.56 g/ml of TPA in 0.5% v/v carboxymethylcellulose as well as the control dose, composed solely of dispersion of carboxymethylcellulose (0.5% v/v). Four experimental windows were established: group I-treatment in utero, in the fetal period (gestational day-GD 10.5-18.5), with euthanasia at GD 18.5; group II-treatment in utero, in the fetal period (GD 10.5-18.5) and the lactational period (postnatal day (PND-15)), with euthanasia at 15 days; group III-treatment in utero in the fetal period (DG 10.5-18.5) with euthanasia at 70 days (age of sexual maturity, PND 70); group IV-treatment in utero, in the fetal period (GD 10.5-18.5) and the lactational period (PND-15), with euthanasia at 70 days (PND70). The results indicate that TPA changes the reproductive parameters (testicular weight, GI, penis size, and anogenital index) only at the dose of 0.56 g/ml in the fetal period. Data on the volumetric ratio of the testis elements show that the dispersion with the highest concentration of TPA significantly altered the blood vessel/capillary, lymphatic vessel, and connective tissue percentages. Only at the dose of 0.56 g/ml TPA was it effective in decreasing the Leydig and Sertoli cell numbers of the euthanized animals at GD 18.5. In group II, TPA increased the diameter and lumen of seminiferous tubules, which indicates that TPA accelerated the maturation process of Sertoli cells without changing the number and the nuclear volume of these cells. The Sertoli and Leydig cell numbers of the 70-day animals exposed to TPA in the gestational and lactational period were similar to the control. Therefore, the present study is the first in the literature to show that TPA presents a testicular toxicity during fetal (DG18.5) and postnatal life (PND15), without repercussion in adulthood (70 days).

Carboxymethylcellulose hydrogels crosslinked with keratin nanoparticles for efficient prednisolone delivery.

Carboxymethylcellulose (CMC) and keratin nanoparticle (KNP) hydrogels were obtained, characterized, and applied as drug delivery systems (DDSs) for the first time. Lyophilized CMC/KNP mixtures containing 10, 25, and 50 wt% of KNPs were kept at 170 °C for 90 min to crosslink CMC chains through a solid-state reaction with the KNPs. The hydrogels were characterized by infrared spectroscopy, thermal analyses, X-ray diffraction, mechanical measurements, and scanning electron microscopy. The infrared spectra indicated the formation of ester and amide linkages between crosslinked CMC and KNPs. The elastic modulus of the hydrogel containing 10 wt% KNPs was 2-fold higher than that of the hydrogel containing 50 wt% KNPs. The mechanical properties influenced the hydrogel stability and water uptake. The anti-inflammatory prednisolone (PRED) drug was incorporated into the hydrogels, and the release mechanism was investigated. The hydrogels supported PRED release by drug desorption for approximately 360 h. A sustained release mechanism was achieved. The CMC/KNP and CMC/KNP/PRED hydrogels were cytocompatible toward mammalian cells. The CMC/KNP/PRED set imparted the highest cell viability after 7 days of incubation. This study showed a straightforward procedure to create DDSs (chemically crosslinked) based on polysaccharides and proteins for efficient PRED delivery.

Solving the delivery of Lactococcus lactis: Improved survival and storage stability through the bioencapsulation with different carriers.

Probiotics are live microorganisms that confer beneficial effects on the health of the host if administered in adequate amounts (106  CFU viable microorganisms/g of food). As the most frequent route of administration of these microorganisms is oral, the number of them that remains viable through the gastrointestinal tract decreases substantially. Thus, in this research work, we developed a series of alginate-based microparticles using different adjuvants such as methylcellulose, carboxymethylcellulose, chitosan, carbopol, ß-cyclodextrin, starch, carrageenan, and Eudragit® RS 100 as carriers for improving the survival of Lactococcus lactis. The alginate-based formulations exhibited very good drug encapsulation efficiency, up to 90%. Release studies from selected microparticles revealed that almost 100% of bacteria were in solution at 30 min. By scanning electron microscopy, irregular nonporous particles with a size between 200 and 500 µm were seen. In particular, microparticles formulated with alginate-carboxymethylcellulose and alginate-methylcellulose exhibited the best protection for the bacterial cells against both simulated gastric juice and simulated intestinal juice. In addition, those microparticulate systems were able to maintain the viability of the encapsulated bacteria in large numbers for at least 24 weeks. Thus, the present study confirmed that these alginate-based microparticles are a valuable approach for keeping the viability and storage stability of L. lactis.

Nanoplexes of ZnS quantum dot-poly-l-lysine/iron oxide nanoparticle-carboxymethylcellulose for photocatalytic degradation of dyes and antibacterial activity in wastewater treatment.

The contamination and pollution of wastewater with a wide diversity of chemical, microbiological, and hazardous substances is a field of raising environmental concern. In this study, we developed, for the first time, new hybrid multifunctional nanoplexes composed of ZnS semiconductor quantum dots (ZnS QDs) chemically biofunctionalized with epsilon-poly-l-lysine (ɛPL) and coupled with magnetic iron oxide nanoparticles (MION, Fe3O4) stabilized by carboxymethylcellulose (CMC) for the photodegradation (ZnS) of organic molecules and antibacterial activity (ɛPL) with a potential of recovery by an external magnetic field (Fe3O4). These nanosystems, which were synthesized entirely through a green aqueous process, were comprehensively characterized regarding their physicochemical properties combined with spectroscopic and morphological features. The results demonstrated that supramolecular colloidal nanoplexes were formed owing to the strong cationic/anionic electrostatic interactions between the biomacromolecule capping ligands of the two nanoconjugates (i.e., polypeptide in ZnS@ɛPL and polysaccharide in Fe3O4@CMC). Moreover, these nanosystems showed photocatalytic degradation of methylene blue (MB) used as a model dye pollutant in water. Besides MB, methyl orange, congo red, and rhodamine dyes were also tested for selectivity investigation of the photodegradation by the nanoplexes. The antibacterial activity ascribed to the ɛPL biomolecule was confirmed against Gram-positive and Gram-negative bacteria, including drug-resistance field strains. Hence, it is envisioned that these novel green nanoplexes offer a new avenue of alternatives to be employed for reducing organic pollutants and inactivating pathogenic bacteria in water and wastewater treatment, benefiting from easy magnetic recovery.

Modified celluloses improve the proofing performance and quality of bread made with a high content of resistant starch.

BACKGROUND: Adding resistant starch (RS) to bread formulations is a promising way of increasing fiber content of white bread. However, the partial replacement of wheat flour (WF) by RS can lead to a decrease in technological quality. The objective of this study was to analyze the performance of hydroxypropylmethylcellulose and carboxymethylcellulose as improvers of wheat bread with a high level of replacement (30%) with maize RS. The levels of the modified celluloses were 1% and 1.5% (WF + RS basis), and a formulation without modified celluloses was used as control. Proofing time, loaf volume, crumb characteristics (porosity, texture), and bread staling parameters (hardness increase, moisture loss), among other attributes, were analyzed, and principal component analysis was applied to compare samples. RESULTS: The use of both modified celluloses was effective in improving the quality of breads. Specific volume and crumb porosity were enhanced, particularly at the 1.5% level. Breads with modified celluloses also allowed a higher retention of water and a better preservation of mechanical properties during storage. The principal component analysis projection graph for the first two principal components showed that samples with modified celluloses were clustered by the level of hydrocolloid addition rather than by the type of hydrocolloid used, although all the samples with modified celluloses were close to each other and distant from the control sample without hydrocolloids. CONCLUSION: The quality decrease resulting from the replacement of WF by a high level of RS can be greatly compensated by the use of structuring agents such as hydroxypropylmethylcellulose and carboxymethylcellulose. © 2022 Society of Chemical Industry.

Uso de hidroxiapatita de cálcio no tratamento da dermatoporose / Use of calcium hydroxyapatite in the treatment of dermatoporosis

A dermatoporose é a síndrome de fragilidade cutânea. Acomete principalmente indivíduos acima de 60 anos, com maior prevalência no sexo feminino. Os principais fatores de risco são: envelhecimento, exposição solar intensa e uso de corticoterapia tópica e sistêmica. Se manifesta clinicamente por atrofia cutânea, púrpuras senis, pseudo cicatrizes estrelares e lacerações, podendo evoluir com hematomas dissecantes e infecções graves. Trata-se de uma doença com grande impacto na qualidade de vida dos pacientes e, até o presente momento, não há terapias com resultados satisfatórios. Hidratação, vitamina C tópica e oral, luz intensa pulsada foram algumas das terapêuticas estudadas. A hidroxiapatita de cálcio é um bioestimulador de colágeno composto por microesferas em um veículo de carboximetilcelulose (Radiesse®). Tem sido usada para estimular a produção endógena de colágeno e consequentemente melhorar a qualidade e espessura da pele. Este efeito do produto poderia melhorar o quadro clínico da dermatoporose. O estudo teve como objetivo avaliar a melhora das lesões purpúricas e da atrofia da pele após aplicação de Radiesse® no antebraço de 5 pacientes portadores de dermatoporose no setor de Dermatologia do Hospital do Servidor Público Municipal de São Paulo. Os 5 pacientes foram submetidos a aplicação de Radiesse® nos antebraços e foram avaliadas 45 e 90 dias após o procedimento, o número de lesões purpúricas, grau de atrofia da pele através do teste de pinçamento e realizado comparação fotográfica. Após o tratamento, observou-se melhora do número das lesões purpúricas, melhora da atrofia da pele e melhora da qualidade de pele quando comparada fotograficamente. Dessa forma, o tratamento com Radiesse® mostrou-se promissor, com resultados satisfatórios e com um bom perfil de segurança. Palavras-chave: Dermatoporose. Púrpura senil. Radiesse. Bioestimulador. Tratamento.

Experimental evaluation of the use of starch and carboxymethylcellulose in the prevention of intraperitoneal adhesions in hernia surgery with coated meshes

Purpose: Laparoscopic hernia repair involves a risk of adhesion between coated mesh and viscera. Plant polysaccharides such as starch and carboxymethylcellulose (SC) make up a product that acts as a barrier and prevents intraperitoneal adhesions. This study aimed to evaluate whether topical SC can also reduce adhesions between mesh and intra-abdominal organs. Methods: Forty rats each received placement of two intraperitoneal mesh fragments, one on each side of the abdominal wall. Randomly, 20 animals received SC on the right and other 20 on the left, leaving the contralateral side as a control. Fourteen days after the surgery, the animals underwent an additional laparotomy in which macroscopic analysis was performed. Results: As for the percentage of the mesh area affected by adhesion, one (2.6%) animal had > 75% adhesion on the experimental side, and 11 animals (28.9%) on the control side. The adhesion intensity score showed firm adhesions in three (7.9%) animals on the experimental side and nine (23.7%) on the control side. Conclusions: The use of SC decreased the intensity of adhesions and the surface area of the mesh affected by adhesions. There was no negative interference of the product in the incorporation of the mesh into the abdominal wall.

Treatment of experimentally induced partial-thickness burns in rats with different silver-impregnated dressings.

PURPOSE: To evaluate the morphometric, macroscopic and microscopic aspects of experimentally induced partial-thickness burns in rats treated with different silver-based dressings. METHODS: Wistar rats were used, divided into six treatments: saline (NaCl 0.9%); silver sulfadiazine 1%; Silvercel; Mepilex Ag; Aquacel Ag and Acticoat. The animals were monitored daily and euthanized at 7, 14 and 30 days after injury induction (DAI). RESULTS: At 7 DAI, necrosis/crust was greater in control, silver sulfadiazine and Mepilex Ag treatments, granulation tissue was induced by Aquacel Ag, polymorphonuclear infiltrate (PMN) infiltration was intensified by Mepilex Ag; mononuclear infiltrate (MN) infiltration and angiogenesis were increased by Silvercel. At 14 DAI, hemorrhage was decreased by Silvercel and Mepilex Ag, PMN infiltration increased by Acticoat. At 30 DAI, angiogenesis was greater in the Acticoat treatment and fibroblasts were increased by Acticoat and Mepilex Ag. Collagen was induced at 14 DAI by silver sulfadiazine and Aquacel Ag and, at 30 DAI, by silver sulfadiazine and Silvercel treatments. CONCLUSIONS: Silvercel and Acticoat presented better results than the other products. However, all the dressings were better than the control at some point during the process, and may contribute to the healing of partial thickness burns. Silvercel and Aquacel Ag treatments induced better cosmetic outcomes regarding wound closure and scarring.

Development of a Polymeric Membrane Impregnated with Poly-Lactic Acid (PLA) Nanoparticles Loaded with Red Propolis (RP).

The main objectives of this study were to develop and characterize hydrophilic polymeric membranes impregnated with poly-lactic acid (PLA) nanoparticles (NPs) combined with red propolis (RP). Ultrasonic-assisted extraction was used to obtain 30% (w/v) red propolis hydroalcoholic extract (RPE). The NPs (75,000 g mol-1) alone and incorporated with RP (NPRP) were obtained using the solvent emulsification and diffusion technique. Biopolymeric hydrogel membranes (MNPRP) were obtained using carboxymethylcellulose (CMC) and NPRP. Their characterization was performed using thermal analysis, Fourier transform infrared (FTIR), total phenols (TPC) and flavonoids contents (TFC), and antioxidant activity through the radical scavenging assay with 2,2-diphenyl-1-picrylhydrazyl radical (DPPH) and Ferric reducing antioxidant power (FRAP). The identification and quantification of significant RP markers were performed through UPLC-DAD. The NPs were evaluated for particle size, polydispersity index, and zeta potential. The TPC for RPE, NPRP, and MNPRP was 240.3 ± 3.4, 191.7 ± 0.3, and 183.4 ± 2.1 mg EGA g-1, while for TFC, the value was 37.8 ± 0.9, 35 ± 3.9, and 26.8 ± 1.9 mg EQ g-1, respectively. Relevant antioxidant activity was also observed by FRAP, with 1400.2 (RPE), 1294.2 (NPRP), and 696.2 µmol Fe2+ g-1 (MNPRP). The primary markers of RP were liquiritigenin, isoliquiritigenin, and formononetin. The particle sizes were 194.1 (NPs) and 361.2 nm (NPRP), with an encapsulation efficiency of 85.4%. Thermal analysis revealed high thermal stability for the PLA, nanoparticles, and membranes. The DSC revealed no interaction between the components. FTIR allowed for characterizing the RPE encapsulation in NPRP and CMC for the MNPRP. The membrane loaded with NPRP, fully characterized, has antioxidant capacity and may have application in the treatment of skin wounds.

Antihyperlipidemic Activity of Glycoconjugated Phthalimides in Mice Submitted to a Model of Dyslipidemia and Insulin Resistance.

Alterations in lipid and lipoprotein metabolism are factors that trigger several negative metabolic complications. Hyperlipidemia is the starting point for the development of comorbidities of the cardiovascular system, such as atherosclerosis. The search for compounds that reduce high levels of total cholesterol and triglycerides has been widely reported in several publications in the literature. Phthalimide derivatives have been extensively researched with various biological actions. In this study we evaluated the antihyperlipidemic ability of three phthalimide derivatives (FGT-2, FGT-3 and FGT-4) on a model of obesity and insulin resistance in mice. The animals were submitted to a hyperlipid diet for 60 days. On the thirtieth day they were treated with phthalimides (20 mg/kg). The positive control group was treated with Simvastatin (20 mg/kg) and the negative control received only the carboxymethylcellulose vehicle. Biochemical and histological analyzes of all groups were analyzed. The animals treated with phthalimidic derivatives had a reduction in total cholesterol, low density and very low density lipoproteins (LDL-c and VLDL-c), triglycerides and fasting glycemia when compared to the negative control group. The treated animals also showed good results when analyzing the atherogenic indexes Castelli i and II and the ratio Triglycerides/HDL-c. In the oral glucose tolerance test and in the insulin tolerance test, animals treated with phthalimides were more sensitive to the action of the hormone regulating carbohydrate uptake. In the evaluation of the transaminases (AST/ALT), the animals of the group treated with phthalimides presented a lower elevation than the other groups of the experiment, the same observed with the uric acid evaluation. Histological analyzes were performed on liver, kidney, heart and pancreas samples. The groups treated with the compounds FGT-2 and FGT3 presented discrete alterations in the liver and kidney. FGT-4 did not present histological alterations for both tissues and the three phthalimide derivatives did not cause alterations in the other organs. These results suggest that the phthalimides tested can act as antihyperlipidemic agents and have a pleiotropic action, by acting also reducing glycemia in insulin resistance model mimicking diabetes mellitus type 2. These compounds may appear as a new approach in the treatment of obesity and complications, which are multifaceted.

Effect of experimental and commercial artificial saliva formulations on the activity and viability of microcosm biofilm and on enamel demineralization for irradiated patients with head and neck cancer (HNC).

The effect of different artificial saliva formulations on biofilm activity and viability, and on enamel demineralization for head and neck cancer (HNC) patients was evaluated. Irradiated enamel samples were treated (1 min) with BioXtra® or with experimental formulations containing carboxymethylcellulose plus inorganic constituents alone (AS) or containing 0.1 mg mL-1 CaneCPI-5 (AS + Cane), 1.0 mg mL-1 hemoglobin (AS + Hb) or combination of both (AS + Cane + Hb). Phosphate-buffered-saline and chlorhexidine (0.12%) were negative and positive control, respectively. Biofilm was produced from the saliva of five male HNC patients, under 0.2% sucrose exposure for 5 days, and daily treated with the formulations (1 min). No significant effects were observed for the different experimental treatments. BioXtra® significantly reduced lactobacilli, demonstrating antibacterial potential for this group. Chlorhexidine was an effective treatment to significantly reduce all parameters, being an important antimicrobial and anticaries agent. Future in vitro studies must be performed using a new approach for the design of the experimental formulations.

A standardized assessment of moldability parameters of thermoplastic materials used in orthotic manufacturing.

OBJECTIVE: To establish parameters for standardized assessment of the moldability of thermoplastic materials used in orthotic manufacturing and to develop tests for quantification of moldability parameters by simulating the demands of clinical practice, in order to enable accurate and controlled analysis of material properties. PRIMARY OUTCOME MEASUREMENTS: Two commercially available materials were submitted to tests for standardized measurement of moldability. Results were correlated with manufacturer information. Moldability assessment was based on two parameters (conformation and fit), expressed as percentages. RESULTS: Tests, standardized molding procedures and measurements were described. Quantitative data (conformation and fit expressed in percentages) were derived from a pilot study comparing Aquaplast-T™ and Ezeform™. Findings of that study revealed that Aquaplast-T™ is more moldable than Ezeform™ and support technical information provided by the manufacturer. CONCLUSIONS: The assessment method described enabled objective and repeatable measurement of the moldability of materials used in orthotic manufacturing and represent a significant advancement in comparative analysis of materials, with potential positive impacts on therapeutic procedures and clinical decision-making. Tests developed in this study can be used to quantify data provided by manufacturers in order to allow their use by researchers and professionals in rehabilitation.

Encapsulation of Trichoderma harzianum with nanocellulose/carboxymethyl cellulose nanocomposite.

This study proposes the use of green matrices of cellulose nanocrystals (CNC) and a nanocomposite of CNC with carboxymethyl cellulose (CMC) for efficiently encapsulating the plant biocontrol agent Trichoderma harzianum. Beads containing spores of the microorganism were produced by dripping dispersions of the polymers into a CaCl2 coagulation bath, resulting in the crosslinking of CNC chains by Ca2+ ions. SEM micrographs evidenced the T. harzianum spores in the encapsulation matrices. X-ray microtomography confirmed the random distribution of the microorganism within the polymeric matrix and the presence of internal pores in the CNC:CMC:spores beads. Encapsulation in the CNC:CMC nanocomposite favored growth of the fungus after 10 days of storage at room temperature, which could be attributed to the presence of internal pores and to the extra carbon source provided by the CMC. The results indicated that CNC:CMC nanocomposites are promising materials for protecting and delivering microbial inoculants for agricultural applications.

Effect of polyvinyl alcohol and carboxymethylcellulose on the technological properties of fish gelatin films.

The objective of this work was to develop biodegradable films by mixing gelatin/carboxymethylcellulose (FG/CMC) and gelatin/polyvinyl alcohol (FG/PVOH) and to evaluate the effect of adding these polymers on the properties of fish gelatin films. The films FG/CMC and FG/PVOH were produced in the proportions 90/10, 80/20 and 70/30 and characterized their physical, chemical and functional properties. The addition of CMC and PVOH improved the mechanical strength, barrier property and water solubility of gelatin films. FG/CMC films showed greater tensile strength and greater solubility than FG/PVOH. The maximum concentration of CMC promoted the highest mechanical resistance, while the highest PVOH content produced the film with the lowest solubility. The proposed mixing systems proved to be adequate to improve the properties of fish gelatin films, with potential for application in the packaging sector.