The Influence of Maceration and Flavoring on the Composition and Health-Promoting Properties of Roasted Coffee.

Over the years, many methods of refining green beans have been developed, including maceration aimed at enriching the coffee aroma and improving the overall quality. This study aimed to evaluate the influence of different methods of maceration (fruit and wine) and the addition of food flavors to coffee beans on antioxidant activity, caffeine, phenolic and organic acid content, as well as health-promoting properties. This research showed that the use of the maceration in melon and apple fruit pulp (100 g of fruit pulp per 100 g of green coffee, incubated for 24 h, coffee roasting at 230 °C, control trial roasted coffee) ensured the highest polyphenol (hydroxycinnamic acids and their esters-chlorogenic acids) content (in melon pulp-13.56 g/100 g d.b. (dry bean); in apple pulp-13.22 g/100 g d.b., p < 0.05 (one-way ANOVA)) and antioxidant activity. Melon (92.11%, IC50 = 3.80 mg/mL extract) and apple (84.55%, IC50 = 4.14 mg/mL) showed the highest α-amylase (enzyme concentration 10 µmol/mL) inhibition activity (0.5 mg/mL for both fruits). The addition of food flavors reduced the total content of chlorogenic acids to the range of 4.64 to 6.48 g/100 g d.b. and increased the content of acrylamide and 5-HMF, which positively correlated with a low antioxidant potential compared to the macerated samples and the control. Studies have shown that coffee macerated in the pulp of melon and apple fruit, due to its great potential to inhibit α-amylase in vivo, may have a preventive effect on type II diabetes. This study complements the current knowledge on the potential health-promoting properties of coffee flavored using different methods; further research should include more advanced models for testing these health-promoting properties. Statistical analysis was based on the determination of the average values of six measurements and their standard deviation, as well as on the one-way ANOVA (analysis of variation) and the Pearson correlation coefficient, using Statistic 10.0 software. The significance was defined at p ≤ 0.05.

Predicting best planting location and coffee cup quality from chemical parameters: An evaluation of raw Arabica coffee beans from São Paulo over two harvests.

Arabica coffee is one of the most consumed beverages in the world. The chemical components present in raw Arabica coffee beans (RACB) are directly related to the cup quality of the beverage. Environmental and genetic factors influence the content and profile of these components. Then, this work aimed to evaluate different chemical parameters of RACB from 3 varieties planted in 3 different experimental farms located within the "Alta Mogiana" terroir harvested in 2021 and 2022 to identify a better variety for each farm to produce a high cup quality Arabica coffee. The harvest period had a strong influence on most of the studied parameters because atypical weather conditions occurred in the 2021 harvest. The RACB harvested in 2022 yielded better results and supposedly will produce a beverage of high cup quality. Samples harvested in this period presented mainly average moisture levels closer to optimum (11.02 against 8.56 % in 2021); low total titratable acidity (98.00 against 169.75 mL 0.1 M NaOH/100 g in 2021); high amounts of free amino acids (0.96 against 0.93 g GAE/100 g in 2021), low amounts of CGA (4.27 against 4.85 g/100 g in 2021) and caffeine (1.08 against 1.76 g/100 g in 2021) and high amounts of trigonelline (1.12 against 0.96 g/100 g in 2021). The Rome Sudan variety had the best combination of chemical results, mainly when cultivated in Farm 2 in 2022, presenting high amounts of protein content (15.24 %) and free amino acids (0.96 g GAE/100 g), low total titratable acidity (98.3 mL 0.1 M NaOH/100 g), low amounts of CGA (4.55 g/100 g) and caffeine (1.29 g/100 g) and high amounts of trigonelline (1.11 g/100 g). The analysis of chemical compounds could predict the best farm to cultivate each variety studied and was a guide to foresee a higher cup quality of RACB beverages.

Assessing the influence of spontaneous fermentation on consumer emotional responses to roasted arabica coffee in a biometric approach.

Beyond sensory quality, food-evoked emotions play a crucial role in consumers acceptance and willingness to try, which are essential for product development. The link between fermented coffee sensory characteristics and elicited emotional responses from consumers is underexplored. This study aimed to evaluate consumers' acceptability of spontaneously fermented and unfermented roasted coffee through self-reported sensory evaluation and biometrics assessment. Self-reported liking in 15-cm non-structured scale, multiple choice of negative, neutral, and positive emojis, and subconscious emotional responses from 85 regular coffee consumers were analysed. Their relationship with the pattern of volatile aromatic compounds were also investigated. Fermented (F) and unfermented (UF) coffee beans with light- (L), dark- (D), and commercial dark (C) roasting levels were brewed and evaluated along with gas chromatography-mass spectrometry measurement. Multivariate data analysis was conducted to explore the inner relationships among volatile compounds, self-reported liking, and biometrics. Unfermented-dark roasted coffee (UFD) had highest overall consumer liking response ± standard error (8.68 ± 0.40), followed by the fermented-dark roasted (FD) at 7.73 ± 0.43 with no significant differences (p > 0.05). Fermented light-roasted coffee was associated with lower liking scores and negative emotional responses. In contrast, dark roasted coffee, which was linked to positive emojis and emotional responses, exhibited less detected peak area of volatile compounds contributing fruity and vegetative aromas, such as benzaldehyde, furfuryl acetate, 2-acetyl-1-methyl pyrrole, and isovaleric acid, potentially as negative drivers of consumer liking. Findings from this study could guide coffee manufacturers in developing specialty coffee if spontaneous fermentation is offered.

Potential of Coffee Cherry Pulp Extract against Polycyclic Aromatic Hydrocarbons in Air Pollution Induced Inflammation and Oxidative Stress for Topical Applications.

Airborne particulate matter (PM) contains polycyclic aromatic hydrocarbons (PAHs) as primary toxic components, causing oxidative damage and being associated with various inflammatory skin pathologies such as premature aging, atopic dermatitis, and psoriasis. Coffee cherry pulp (CCS) extract, rich in chlorogenic acid, caffeine, and theophylline, has demonstrated strong antioxidant properties. However, its specific anti-inflammatory effects and ability to protect macrophages against PAH-induced inflammation remain unexplored. Thus, this study aimed to evaluate the anti-inflammatory properties of CCS extract on RAW 264.7 macrophage cells exposed to atmospheric PAHs, compared to chlorogenic acid (CGA), caffeine (CAF), and theophylline (THP) standards. The CCS extract was assessed for its impact on the production of nitric oxide (NO) and expression of tumor necrosis factor-alpha (TNF-α), interleukin-6 (IL-6), inducible nitric oxide synthase (iNOS), and cyclooxygenase-2 (COX-2). Results showed that CCS extract exhibited significant antioxidant activities and effectively inhibited protease and lipoxygenase (LOX) activities. The PAH induced the increase in intracellular reactive oxygen species, NO, TNF-α, IL-6, iNOS, and COX-2, which were markedly suppressed by CCS extract in a dose-dependent manner, comparable to the effects of chlorogenic acid, caffeine, and theophylline. In conclusion, CCS extract inhibits PAH-induced inflammation by reducing pro-inflammatory cytokines and reactive oxygen species (ROS) production in RAW 264.7 cells. This effect is likely due to the synergistic effects of its bioactive compounds. Chlorogenic acid showed strong antioxidant and anti-inflammatory activities, while caffeine and theophylline enhanced anti-inflammatory activity. CCS extract did not irritate the hen's egg chorioallantoic membrane. Therefore, CCS extract shows its potential as a promising cosmeceutical ingredient for safely alleviating inflammatory skin diseases caused by air pollution.

An overview on the Brazilian Coffea canephora scenario and the current chemometrics-based spectroscopic research.

This review explores the historical, botanical, sensory, and quality aspects of Coffea canephora, with a focus on Brazil's rise as a producer of specialty canephora coffees in the Amazon region, Espírito Santo, and Bahia. Brazil has gained global recognition through the first geographical indications for canephora: Matas de Rondônia for robusta amazônico coffee and Espírito Santo for conilon coffee. Despite this, comprehensive insights into how variety, terroir, environmental conditions, and cultivation practices influence the chemical and sensory attributes of Brazilian canephora remain underdeveloped compared to well-studied arabica coffee. Producers and researchers are working to elevate canephora coffees to higher market levels, despite technological, production, and perception challenges stemming from its historical reputation for poor quality. Ensuring the sustainability of Amazonian canephora coffee without deforestation is particularly challenging due to the need to verify practices across numerous small-scale farms. There is also a critical need for standardized production and tasting protocols for Brazilian canephora, leveraging local expertise and professional cuppers to ensure consistent quality and reliable sustainability claims. Significant opportunities exist in valuing the production chain of geographically unique canephora coffees, which could increase specialty exports, enhance economic prospects for local farmers, and support Amazon preservation. Recognizing and marketing these coffees as premium products with unique flavor profiles can boost their global appeal. Another challenge lies in establishing new specialty standards for soluble coffee from specialty canephora to meet consumer demands for convenience without compromising taste or ethical standards. In such a scenario, several analytical methods have been suggested to identify high-quality variants, combating their stigmatization. The potential of spectroscopy techniques and chemometrics-based data science is highlighted in confirming coffee quality, authenticity, traceability, and geographical origin, enhancing model interpretation and predictive accuracy through synergistic and complementary information. Non-targeted spectroscopic analyses, providing comprehensive spectral fingerprints, are contrasted with targeted analyses. Overall, this review offers valuable insights for the coffee scientific community, exporters, importers, roasters, and consumers in recognizing the potential of Brazilian canephora coffees.

Influence of Fermentation Time and Inoculation of Starter Culture on the Chemical Composition of Fermented Natural Coffee Followed by Depulping.

Fermentation using starter cultures has been considered an alternative and economically viable technology for the production of specialty coffees. This type of technology promotes several benefits, such as increased sensory quality, control over the fermentation process, predictability of the final product and added value. Coffee (Coffea arabica L.) samples for this study were collected in Presidente Olegário - MG (2018/19 crop year) in the Cerrado region of Minas Gerais. The effects of natural fermentation and inoculation of the yeast Torulaspora delbrueckii and duration of fermentation (0, 24, 48, 72 and 96 hours) on the sensory and chemical quality (analysis of bioactive, volatile, and organic compounds and fatty acids) of coffee were evaluated. The objective of this study was to determine the effect of fermentation time and starter culture inoculation on the chemical composition of fermented coffees. Fermentation time significantly influenced the sensory description of the coffee beverage, with notes of honey, brown sugar and almond predominating up to 48 hours, for coffees fermented for 72 and 96 hours the notes described were and fruity, winey notes. The chemical composition was primarily influenced by fermentation time.

Insights into acrylamide and furanic compounds in coffee with a focus on roasting methods and additives.

Roasting is necessary for bringing out the aroma and flavor of coffee beans, making coffee one of the most consumed beverages. However, this process also generates a series of toxic compounds, including acrylamide and furanic compounds (5-hydroxymethylfurfural, furan, 2-methylfuran, 3-methylfuran, 2,3-dimethylfuran, and 2,5-dimethylfuran). Furthermore, not much is known about the formation of these compounds in emerging coffee formulations containing alcohol and sugars. Therefore, this study investigated the effect of roasting time and degree on levels of acrylamide and furanic compounds in arabica coffee using fast and slow roasting methods. The fast and slow roasting methods took 5.62 min and 9.65 min, respectively, and reached a maximum of 210 °C to achieve a light roast. For the very dark roast, the coffee beans were roasted for 10.5 min and the maximum temperature reached 245 °C. Our findings showed that the levels of acrylamide (375 ± 2.52 µg kg-1) and 5-HMF (194 ± 11.7 mg kg-1) in the slow-roasted coffee were 35.0 % and 17.4 % lower than in fast-roasted coffee. Furthermore, light roast coffee had significantly lower concentrations of acrylamide and 5-HMF than very dark roast, with values of 93.7 ± 7.51 µg kg-1 and 21.3 ± 10.3 mg kg-1, respectively. However, the levels of furan and alkylfurans increased with increasing roasting time and degree. In this study, we also examined the concentrations of these pollutants in new coffee formulations consisting of alcohol-, sugar-, and honey-infused coffee beans. Formulations with honey and sugar resulted in higher concentrations of 5-HMF, but no clear trend was observed for acrylamide. On the other hand, formulations with honey had higher concentrations of furan and alkylfurans. These results indicate that optimizing roasting time and temperature might not achieve the simultaneous reduction of all the pollutants. Additionally, sugar- and honey-infused coffee beans are bound to have higher furanic compounds, posing a higher health risk.

Organic arabic coffee husk: Antioxidant and cytoprotective properties and potential impacts on selected human intestinal bacterial populations of individuals with diabetes.

Coffee husks are the main by-product of the coffee industry and have been traditionally discarded in the environment or used as fertilizers. However, recent studies have shown that coffee husks have bioactive compounds, such as phenolics and fiber-bound macro antioxidants, offering a range of potential health benefits. This study evaluated the antioxidant capacity, cytoprotective/cytotoxic properties, and stimulatory effects on the relative abundance of selected intestinal bacterial populations of individuals with diabetes of organic coffee husks. Organic coffee husk had good antioxidant capacity, maintained under simulated gastric conditions, with more than 50% of antioxidant capacity remaining. Organic coffee husk exerted cytoprotective properties in Caco-2 cells, indicating that cellular functions were not disturbed, besides not inducing oxidation. Overall, organic coffee husk promoted positive effects on the abundance of distinct intestinal bacterial groups of individuals with diabetes during in vitro colonic fermentation, with a higher relative abundance of Bifidobacterium spp., indicating the availability of components able to reach the colon to be fermented by intestinal microbiota. Organic coffee husk could be a circular material to develop new safe and pesticide-free functional ingredients with antioxidant and potential beneficial effects on human intestinal microbiota.

Potential Risk of Caffeoylquinic Acids, the Main Polyphenol Components in Coffee, on the Health of Piglets.

As the main coffee polyphenols, caffeoylquinic acids (CQAs) are abundant in coffee-derived products and have the potential to act as novel feed additives for animals. However, research on the side effects of dietary CQAs supplementation is scarce, especially in young animals. Here, we explore the safety of CQAs derived from green coffee beans. Results showed that ingesting 50, 125, 250, and 500 mg/kg of dietary CQAs for 55 days is associated with greater final body weight, average daily gain, and feed efficiency in piglets compared with the control group (P < 0.05). CQAs also increased the apparent digestibility of dry matter, crude protein, and gross energy at a dose over 50 mg/kg (P < 0.05). Interestingly, CQAs supplementation with 500 mg/kg increased the white blood cell count (P < 0.05). Moreover, CQAs supplementation at a dose over 50 mg/kg decreased the serum total cholesterol concentration but increased the immunoglobulin M level in serum (P < 0.05). Importantly, CQAs supplementation had no side effects on organ histopathology and organ weight (P > 0.05). These results suggest that CQAs could serve as a secure and effective additive to improve growth performance without negatively affecting the organs of piglets.

Quantification of two derivatives of malic acid first-time discovered in coffee: Influence of postharvest processing method.

This study quantified, for the first time, 2-isopropylmalic and 3-isopropylmalic acids, in green, roasted and espresso coffee by UHPLC-MS/MS. Moreover, it reports the influence of postharvest processing methods (natural, washed and honey) on their content. New extraction techniques were developed and validated from three coffee matrices (green, roasted and espresso). Honey coffee exhibited levels substantially higher of 2-isopropylmalic acid than those processed by natural and washed methods (p < 0.05). Specifically, 2-isopropylmalic acid levels in honey green, roasted and espresso coffee samples were 48.24 ± 7.31 ng/g, 168.8 ± 10.88 ng/g and 177.5 ± 9.49 ng/g, respectively. This research highlights the significant impact of processing methods on the chemical profile of coffee and introduces 2-isopropylmalic and 3-isopropylmalic acids as potential quality indicators. Moreover, it suggests that the fermentation stage during processing may play a crucial role in their formation, laying the foundation for optimizing coffee processing to enhance quality.

Evaluation of the effect of roasting and digestion on biological activity of compounds of coffee extracts - in vitro assessment of the bioavailability, cytoprotective properties and modulation of inflammatory response.

Coffee is the most consumed beverage in the world. Consumption of phenolic compounds present in coffee protects the body against oxidative stress generation, inflammatory response, and cancer development. The aim of the study was evaluation of biological activity of coffee extracts (obtained from green, as well as light and dark roasted Robusta and Arabica beans) and isolated fractions on human colon adenocarcinoma Caco-2 cells, which are used as a cellular model of intestinal barrier in bioavailability studies. Additionally, impact of coffee phenolics on oxidative stress level and anti-inflammatory activity has been studied with RAW 264.7 macrophages used in immunomodulatory research. It was demonstrated that the coffee constituents protection against oxidative stress, lipotoxicity and secretion of proinflammatory mediators is correlated with the presence of mono- and dichlorogenic acids and roasting process. It was demonstrated that coffee phytochemicals can decrease cells proliferation and bind to topoisomerase IIα being a dietary tool in cancer prevention.

Exploring accurate mass measurements in pixel-based chemometrics: Advancing coffee classification with GC-HRMS-A proof of concept study.

This paper presents a study that assesses the application of chemometrics for classifying coffee samples in a quality control context. High-resolution and accurate mass measurements were utilized as input for pixel-based orthogonal partial least squares discriminant analysis (OPLS-DA) models. The compositional data were acquired through a fully automated workflow combining headspace solid-phase microextraction and gas chromatography-high-resolution mass spectrometry (GC-HRMS) using an FT-Orbitrap® mass analyzer. A workflow centered on accurate mass measurements was successfully utilized for group-type analysis, offering an alternative to methods relying solely on MS similarity searches. The predictive models underwent thorough evaluation, demonstrating robust multivariate classification performance. Five key coffee attributes, bitterness, acidity, body, intensity, and roasting level were successfully predicted using GC-HRMS data. The results revealed strong predictive accuracy across all models, ranging from 88.9 % (bitterness) to 94.4 % (roasting level). This study represents a significant advancement in automating methods for coffee quality control, notably increasing the predictive ability of the models compared to existing literature.

Proteomic Analysis of In Vitro Plant Tissues (Coffea canephora): A Case of Study.

Since the term proteomics was coined by Marc Wilkins in 1994, there has been an explosion in the number of articles reporting the use of the proteomics technique. As the layers of biological organization and their regulation increase, the complexity of living beings increases. Thus, we go from the genome to tissues, cells, cellular compartments, and phenotypes and the complexity of the tools used to study this complexity also increases. Unlike the genome study, in the case of the proteome, we have a more complex panorama. We have a spatial and temporal proteome. Proteomics helps to answer complex biological questions since proteins' function depends on their molecular structure, subcellular localization, and posttranslational modifications. In this protocol, we describe a methodology to extract proteins using different methods, separating proteins by electrophoresis in double-dimensional gels and analyzing the gels using specialized software that allows obtaining information on the number and abundance of the proteins from the gels.

Lipophilic and Hydrophilic Metabolites as Descriptors of Different Coffee Beverages.

Coffee is a widely consumed beverage rich in bioactive phytochemicals. This study investigated the effect of brewing method on the profile of potential bioactive compounds in different coffee beverages using metabolomics and lipidomics based on UHPLC-MS/QTOF. The oil contents of the espresso coffee (EC), pot coffee (PC), instant coffee (IC), and filter coffee (FC) beverages studied were 0.13% ± 0.002, 0.12% ± 0.001, 0.04% ± 0.002, and 0.03% ± 0.003, respectively. Univariate analysis indicated significant differences (P < 0.001) in oil content when EC and PC beverages were compared with IC and FC beverages. Principal component analysis revealed similarities in the lipid profiles of FC and EC beverages and the hydrophilic profiles of PC and FC beverages. The EC beverage had the highest intensity of hydrophilic compounds such as adenine, theobromine, chlorogenic acid, and caffeine. The PC beverage was the most abundant in triglycerides, phosphatidylcholine, and diterpenes. Cafestol and kahweol esters, but not their free forms, were the most abundant diterpenes in the PC beverage. This work provides information on the differences in the profile of potentially bioactive compounds in four commonly consumed coffee beverage types and, thus, on the possible differences in the health effects of these coffee beverage types.

Method optimization for the extraction of chlorogenic acids from coffee parchment: An ecofriendly alternative.

One of the principal byproducts of coffee roasting is the coffee parchment. It is abundant in bioactive substances, including derivatives of chlorogenic acids, which are well-known for their exceptional antioxidant effects. It is advantageous to use environmentally friendly extraction techniques on such residues since it adds value to the entire coffee production process supply chain. The aim of this work was to assess and enhance the ability of non-conventional extraction techniques to extract derivatives of chlorogenic acid from coffee parchment. A central composite design was used to maximize the recovery of those phenolic compounds. The optimized extraction conditions were with 5 min extraction period, at a temperature of 70 °C, and 80% ethanol in the extractor solvent. In this conditions extraction recovery of chlorogenic acids was of 0.8% by the use of microwave-aided extraction (MAE). The optimized conditions are practical, economical, and ecologically friendly method to extract phenolic compounds and, consequently, underscores the potential for sustainable utilization of coffee parchment, offering a valuable contribution to the development of environmentally conscious strategies within the coffee industry.

Stress-relieving properties of a polyherbal blend with Syzygium aromaticum L. and Coffea canephora Pierre ex A. Froehner: A review and bibliometric analysis.

OBJECTIVE: Syzygium aromaticum and Coffea canephora are acknowledged for their outstanding antioxidant, anti-inflammatory, and nerve-stimulant properties, showcasing potential in brain protection. Therefore, this study aims to quantitatively review existing literature and assess the potential of using it to formulate a herbal tea blend for managing stress and anxiety. METHODS: Data was retrieved from the Scopus database, and a bibliometric analysis was performed using VOSviewer software. RESULTS: Following a screening process, a total of 121 articles were identified, with S. aromaticum yielding a higher number compared to C. canephora. A detailed exploration of each plant revealed active components such as eugenol, ß-caryophyllene, α-humulene, caffeine, mangiferin, and chlorogenic acids, each exhibiting stimulatory effects alongside antioxidant and anti-inflammatory properties. The neuroprotective effects were attributed to the reduction of oxidative stress and inflammation, coupled with the stimulation of neurotransmitters and hormones like dopamine, serotonin, cortisol, and adrenaline. CONCLUSIONS: The review showed that these plants positively affect mood and cognition by influencing the brain's pleasure system. This suggests the need for further research to combine these plant extracts for developing 'Tenang tea', a potential herbal blend for managing stress and anxiety.

Chitosan-coated paper packaging for specialty coffee beans: Coating characterization, bean and beverage analysis.

Cellulose-based packaging has received great attention due to its characteristics of biodegradability, sustainability, and recyclability. Natural polymer coatings are usually applied to the paper surface to enhance the barriers to water vapour and improve the mechanical properties. A chitosan-based coating for paper packaging was developed in this work to store specialty roasted coffee beans, evaluating two samples of chitosan (Sigma® and molasses chitosan), and following the physico-chemical and microbiological characteristics of coffee beans along a period of 60 days. Sensory tests (Ranking Descriptive Analysis and Preference Test) were applied to the beverage prepared with the roasted and ground coffee beans stored in each packaging. Thin chitosan films provided good coverage and adhesion on the paper. Improved mechanical properties and lower water permeability were observed in the chitosan-coated papers. The physicochemical and microbiological characteristics of the coffee beans were not influenced by the packaging along 60 days of storage. The molasses chitosan coating resulted in slightly darker roasted beans. In sensory evaluation, there is a clear difference between the chitosan samples, so that molasses chitosan-coated packaging had higher scores compared to Sigma® chitosan treatment for flavor and global impression in the preference analysis of the beverage. The molasses chitosan-coated packaging had three to four more consumers attributing the highest scores for the beverage prepared with the roasted beans stored in this type of packaging.

Quality of Arabica coffee grown in Brazilian Savannah and impact of potassium sources.

Located in Brazil's Central Plateau, the Cerrado Savannah is an emerging coffee-growing region with significant potential for the national coffee market. This study investigated the impact of potassium fertilization on Arabica coffee quality in the Cerrado, using three potassium sources (K2SO4, KCl, and KNO3) and five cultivars (Arara, Aranãs, IPR103, Catiguá and Topázio) across two consecutive harvests. We focused on productivity, granulometry, chemical composition, and sensory characteristics. No significant difference in productivity across the cultivars studied or potassium sources as isolated factors were observed. Regarding chemical parameters, potassium sources only affected NO3- and SO42- levels in the grains. Cultivar-specific differences were noted in caffeine (CAF), citric acid (CA), and sucrose (SUC), highlighting a strong genetic influence. K2SO4 improved productivity in Arara (15 %) and IPR103 (11 %), while KNO3 reduced flat grain percentage to 70 % in Catiguá. Sensory evaluation showed that all potassium sources and cultivars produced specialty coffees, with the Arara cultivar treated with K2SO4 achieving the highest SCA score (83.3) while IPR 103 treated with KCl scored the lowest at 78. Only three treatments were below but very close to the threshold (80). Multivariate analysis indicated a trend where specific treatments correlated with higher productivity and quality. Despite the subtle differences in productivity and quality among potassium sources, a cost-benefit analysis may favor KCl due to its affordability, suggesting its viability as a potassium fertilization option in coffee cultivation. Future research is needed to confirm these trends and optimize potassium source selection to enhance coffee quality in the Cerrado.

Identifying the origin of Yemeni green coffee beans using near infrared spectroscopy: a promising tool for traceability and sustainability.

Yemeni smallholder coffee farmers face several challenges, including the ongoing civil conflict, limited rainfall levels for irrigation, and a lack of post-harvest processing infrastructure. Decades of political instability have affected the quality, accessibility, and reputation of Yemeni coffee beans. Despite these challenges, Yemeni coffee is highly valued for its unique flavor profile and is considered one of the most valuable coffees in the world. Due to its exclusive nature and perceived value, it is also a prime target for food fraud and adulteration. This is the first study to identify the potential of Near Infrared Spectroscopy and chemometrics-more specifically, the discriminant analysis (PCA-LDA)-as a promising, fast, and cost-effective tool for the traceability of Yemeni coffee and sustainability of the Yemeni coffee sector. The NIR spectral signatures of whole green coffee beans from Yemeni regions (n = 124; Al Mahwit, Dhamar, Ibb, Sa'dah, and Sana'a) and other origins (n = 97) were discriminated with accuracy, sensitivity, and specificity ≥ 98% using PCA-LDA models. These results show that the chemical composition of green coffee and other factors captured on the spectral signatures can influence the discrimination of the geographical origin, a crucial component of coffee valuation in the international markets.

Rapid detection of markers in green coffee beans with different primary processing treatments of Coffea arabica L. from Yunnan.

The characteristic flavor of Coffea arabica from Yunnan is largely attributed to the primary processing treatments through affecting the VOCs accumulation. Therefore, a rapid and comprehensive detection technique is needed to accurately recognize VOCs in green coffee beans with different pretreatment methods. Hence, we conducted volatile profiles and identified nine markers of three different primary processed green coffee beans from the major production areas in Yunnan with the combined of HS-SPME-GC-MS and PTR-TOF-MS. The relationships between the chemical composition and the content of VOCs in green coffee beans were elucidated. Among the markers, palmitic acid (F3), linoleic acid (F6), α-ethylidene phenylacetaldehyde (T4), and phytane (T8) contributed to the antioxidant activity of sun-exposed green coffee beans. In conclusion, the analytical technology presented here provided a general tool for an overall and rapid understanding of a detailed volatile profiles of green coffee beans in Yunnan.