Modernization of digital food safety control.

Foodborne illness remains a pressing global issue due to the complexities of modern food supply chains and the vast array of potential contaminants that can arise at every stage of food processing from farm to fork. Traditional food safety control systems are increasingly challenged to identify these intricate hazards. The U.S. Food and Drug Administration's (FDA) New Era of Smarter Food Safety represents a revolutionary shift in food safety methodology by leveraging cutting-edge digital technologies. Digital food safety control systems employ modern solutions to monitor food quality by efficiently detecting in real time a wide range of contaminants across diverse food matrices within a short timeframe. These systems also utilize digital tools for data analysis, providing highly predictive assessments of food safety risks. In addition, digital food safety systems can deliver a secure and reliable food supply chain with comprehensive traceability, safeguarding public health through innovative technological approaches. By utilizing new digital food safety methods, food safety authorities and businesses can establish an efficient regulatory framework that genuinely ensures food safety. These cutting-edge approaches, when applied throughout the food chain, enable the delivery of safe, contaminant-free food products to consumers.

Effect of temperature on the rheological, textural, and sensory properties of butters from New Zealand market.

Texture and sensory studies at various temperatures are important in evaluating and improving the functionality of butter. While literature is scarce, we evaluated and compared the effect of temperature (5-25°C) on the texture, rheological and sensory properties of commercial butter samples (salted, unsalted, cultured, and spreadable) from the New Zealand market. In addition, the instrumental analyses were compared with the sensory evaluation, to understand the possibility of using instrumental analysis to evaluate consumer liking for different butters. Butter type, temperature, and their type-temperature interaction exhibited significant differences for all instrumental textural parameters. As expected, higher temperature produced softer butter that was more spreadable, liquid-like, less adhesive, less cohesive, had lower storage modulus (G') and lower loss modulus (G″) with the melting of milk fat crystals; however, the rate of change varied for the different butter samples. We have established meltability as the parameter for evaluating butter selection for different applications. The spreadable butter sample exhibited the lowest hardness and G', and highest spreadability (p < .05) at all temperatures, owing to its low solid fat content and the abundance of low-melting triglycerides. The cultured butter sample had the highest melting point, owing to compositional differences. The instrumental and sensory texture analyses were highly correlated, indicating the comparative effectiveness of both approaches for studying the effects of different temperatures on butter textural properties. Overall, our findings provide detailed reference to the dairy industry for butter manufacture, considering variation in fatty acid composition, texture analysis, rheology, and sensory analysis, over the range of storage/usage temperatures.

Children of Nature: Thoughts on Targeted and Untargeted Analytical Approaches to Decipher Polyphenol Reactivity in Food Processing and Metabolism.

Following 25 years of polyphenol research in our laboratory, the astonishing chemical and metabolic reactivity of polyphenols resulting in considerable chemical diversity has emerged as the most remarkable attribute of this class of natural products. To illustrate this concept, we will present selected data from black tea and coffee chemistry. In black tea chemistry, enzymatic fermentation converts six catechin derivatives into an estimated 30 000 different polyphenolic compounds via a process we have termed the oxidative cascade process. In coffee roasting, around 45 chlorogenic acids are converted into an estimated 250 novel derivatives following a series of diverse chemical transformations. Following ingestion by humans, these dietary polyphenols, whether genuine secondary metabolites or food processing products, encounter the microorganisms of the gut microbiota, converting them into a myriad of novel structures. In the case of coffee, only two out of 250 chlorogenic acids are absorbed intact, with most others being subject to gut microbial metabolism. Modern mass spectrometry (MS) has been key in unravelling the true complexity of polyphenols subjected to food processing and metabolism. We will accompany this assay with a short overview on analytical strategies developed, including ultrahigh-resolution MS, tandem MS, multivariate statistics, and molecular networking that allow an insight into the fascinating chemical processes surrounding dietary polyphenols. Finally, experimental results studying biological activity of polyphenols will be presented and discussed, highlighting a general promiscuity of this class of compounds associated with nonselective protein binding leading to loss of enzymatic function, another noteworthy general property of many dietary polyphenols frequently overlooked.

Consumption of critical nutrients and sweeteners related to the risk of chronic diseases in the population of Antioquia, according to the degree of food processing.

OBJECTIVE: To analyze the consumption of critical nutrients and other sweeteners, according to the degree of food processing in the population of Antioquia. METHODS: Cross-Sectional Study. The dietary intake of 4,382 participants of the Perfil Alimentario y Nutricional de Antioquia 2019 (Antioquia Food and Nutrition Profile 2019) was evaluated. Processed foods (PF) and ultra-processed products (UPP) reported by 24-hour recall were classified according to the Nova system. The Nutrient Profile Model (NPM) of the Pan American Health Organization (PAHO) was used. The amount of PF and UPP consumed with excess of critical nutrients related to chronic diseases (CD) was measured. The difference in average intake, the prevalence of excess intake, and the likelihood of inadequacy between groups with and without excess dietary content were assessed. RESULTS: Nearly 50% of the PF and UPP consumed had excess in at least one critical nutrient. The population consumed daily one or more products with excess in free sugar (73.3%), total fat (75.2%), saturated fat (77.0%), sodium (83.9%), and/or sweeteners (36.8%). Those who consumed products with excessive amounts had a higher intake of total fat (> 5.8%); saturated fat (> 3.8%); and sodium (> 698.7 mg) in adults and adolescents, in children 5-10 years (> 659.2 mg), and in children under 5 years (> 498 mg). Those who consumed products with excessive amounts presented the greatest possibilities of dietary inadequacy. CONCLUSION: The population of Antioquia that consumes PF and UPP with excessive amounts of free sugars, total fat, saturated fat, sodium, and/or sweeteners presents an unbalanced diet. Reducing the consumption of these products and returning to a natural and/or minimally processed diet may be an effective strategy to achieve the nutrient intake recommendations prioritized by PAHO in the population of Antioquia.

Validity and Reliability of the Turkish Version of the Screening Questionnaire of Highly Processed Food Consumption (sQ-HPF).

The global consumption of highly (ultra) processed foods (HPFs) is increasing, and it is associated with non-communicable diseases. This study aimed to assess the validity and reliability of the Screening Questionnaire of Highly Processed Food Consumption (sQ-HPF). This study included 94 adults. Sociodemographic data were collected, and anthropometric and blood pressure measurements were performed. The sQ-HPF was translated into Turkish and culturally adapted. Dietary intake was assessed using three-day dietary records. Factor analysis and Cronbach's alpha were used to evaluate the validity and consistency of the sQ-HPF. Test-retest reliability was assessed with the intraclass correlation coefficient (ICC). Three items from the original sQ-HPF were excluded due to low factor loadings. The Kaiser-Meyer Olkin (KMO) coefficient for the measure of sample adequacy was found to be 0.642 and Bartlett's test of sphericity was found to be significant (p < 0.001). A significant correlation was found between the sQ-HPF score and HPF consumption derived from the 3-day dietary records (p < 0.05). Cronbach's alpha was found to be 0.65. Individuals with higher sQ-HPF scores consumed a significantly greater percentage of energy from HPFs (kcal/day) (p < 0.001). The sQ-HPF demonstrated good test-retest reliability (ICC = 0.76). The Turkish version of the sQ-HPF is a valid and reliable tool for assessing HPF consumption patterns and can be used in epidemiological and clinical studies.

Insights into acrylamide and furanic compounds in coffee with a focus on roasting methods and additives.

Roasting is necessary for bringing out the aroma and flavor of coffee beans, making coffee one of the most consumed beverages. However, this process also generates a series of toxic compounds, including acrylamide and furanic compounds (5-hydroxymethylfurfural, furan, 2-methylfuran, 3-methylfuran, 2,3-dimethylfuran, and 2,5-dimethylfuran). Furthermore, not much is known about the formation of these compounds in emerging coffee formulations containing alcohol and sugars. Therefore, this study investigated the effect of roasting time and degree on levels of acrylamide and furanic compounds in arabica coffee using fast and slow roasting methods. The fast and slow roasting methods took 5.62 min and 9.65 min, respectively, and reached a maximum of 210 °C to achieve a light roast. For the very dark roast, the coffee beans were roasted for 10.5 min and the maximum temperature reached 245 °C. Our findings showed that the levels of acrylamide (375 ± 2.52 µg kg-1) and 5-HMF (194 ± 11.7 mg kg-1) in the slow-roasted coffee were 35.0 % and 17.4 % lower than in fast-roasted coffee. Furthermore, light roast coffee had significantly lower concentrations of acrylamide and 5-HMF than very dark roast, with values of 93.7 ± 7.51 µg kg-1 and 21.3 ± 10.3 mg kg-1, respectively. However, the levels of furan and alkylfurans increased with increasing roasting time and degree. In this study, we also examined the concentrations of these pollutants in new coffee formulations consisting of alcohol-, sugar-, and honey-infused coffee beans. Formulations with honey and sugar resulted in higher concentrations of 5-HMF, but no clear trend was observed for acrylamide. On the other hand, formulations with honey had higher concentrations of furan and alkylfurans. These results indicate that optimizing roasting time and temperature might not achieve the simultaneous reduction of all the pollutants. Additionally, sugar- and honey-infused coffee beans are bound to have higher furanic compounds, posing a higher health risk.

Integrative metabolomics and chemometrics depict the metabolic alterations of differently processed red kidney beans (Phaseolus vulgaris L.) and in relation to in-vitro anti-diabetic efficacy.

Red kidney beans (RKB) serve as a powerhouse packed with a plethora of largely unexplored extraordinary chemical entities with potential significance. However, their nutraceutical applications as a functional hypoglycemic food still lag behind and warrant further investigation. With a scope to optimize chemical and biological traits of RKB, green modification approaches (processing methods) seem inevitable. Accordingly, the current study offered the first integrative workflow to scrutinize dynamic changes in chemical profiles of differently processed RKB and their potential entanglements on diabetes mitigation using Ultra Performance Liquid Chromatography-mass spectrometry (UPLC-MS/MS) coupled with chemometrics. Different physical and biological processing treatments namely germination, fermentation, cooking and dehulling were preliminarily implemented on RKB. Complementarily, the concomitant metabolite alterations among differently processed RKB were monitored and interpreted. Next, an in-vitro α-amylase and α-glycosidase inhibitory testing of the differently processed samples was conducted and integrated with orthogonal projection to latent structures (OPLS) analysis to pinpoint the possible efficacy compounds. A total of 72 compounds spanning fatty acids and their glycerides, flavonoids, phenolic acids, amino acids, dipeptides, phytosterols and betaxanthins were profiled. Given this analysis and compared with raw unprocessed samples, it was found that flavonoids experienced notable accumulation during germination while both fermentation and dehulling approaches sharply intensified the content of amino acids and dipeptides. Comparably, Fatty acids, phytosterols and betaxanthins were unevenly distributed among the comparable samples. Admittedly, OPLS-DA revealed an evident discrimination among the processed samples assuring their quite compositional discrepancies. In a more targeted approach, kaempferol-O-sophoroside, quercetin, carlinoside and betavulgarin emerged as focal discriminators of sprouted samples while citrulline, linoleic acid, linolenoyl-glycerol and stigmasterol were the determining metabolites in cooked samples. Our efficacy experimental findings emphasized that the different RKB samples exerted profound inhibitory actions against both α-amylase and α-glycosidase enzymes with the most promising observations in the case of sprouted and cooked samples. Coincidently, OPLS analysis revealed selective enhancement of possible efficacy constituents primarily citrulline, formononetin, gamabufotalin, kaempferol-O-sophoroside, carlinoside, oleic acid and ergosterol in sprouted and cooked samples rationalizing their noteworthy α-amylase and α-glucosidase inhibitory activities. Taken together, this integrated work provides insightful perspectives beyond the positive impact of different processing protocols on bioactives accumulation and pharmacological traits of RKB expanding their utilization as functional hypoglycemic food to rectify diabetes.

In vitro digestion and fermentation characteristics of soluble dietary fiber from adlay (Coix lacryma-jobi L. var. ma-yuen Staft) bran modified by steam explosion.

Adlay bran is known for its nutrient-rich profile and multifunctional properties, and steam explosion (SE) is an emerging physical modification technique. However, the specific effects of SE on the activity composition and antioxidant capacity of adlay bran soluble dietary fiber (SDF) during in vitro digestion, as well as its influence on gut microbiota during in vitro fermentation, remain inadequately understood. This paper reports the in vitro digestion and fermentation characteristics of soluble dietary fiber from adlay bran modified by SE (SE-SDF). Compared with the untreated samples (0-SDF), most of the phenolic compounds and antioxidant capacity were significantly increased in the SE-SDF digests. Additionally, SE was beneficial for adlay bran SDF to increase the content of acetic acid, propionic acid and total short-chain fatty acids (SCFAs) in fermentation broth during in vitro fermentation. SE-SDF could promote the growth of beneficial bacteria while inhibiting the proliferation of pathogenic microbes. Our research indicates that SE-SDF shows strong antioxidant properties after in vitro digestion and plays a pivotal role in regulating gut microbiota during in vitro fermentation, ultimately enhancing human intestinal health.

Stability study of ptaquiloside biotoxin from P. esculentum var. Arachnoideum in bovine milk and artisanal dairy-food products.

The potential health risk of consuming dairy products made from milk processed in an artisanal manner was investigated due to possible contamination with Ptaquiloside (PTA), a carcinogenic compound found in the food chain of the bracken fern. The study aimed to assess the occurrence and stability of PTA across various processing stages, including pasteurization, cheese production, and yogurt production. Results indicated that pasteurization effectively converted all PTA to Pterosin (PTB), with PTB levels decreasing during refrigerated storage for up to two weeks. The stability and occurrence of initial PTA contamination remained unchanged in yogurt production. Biotoxin concentrations in soft cheeses decreased over time, independent of ionic strength; cheeses with low salt concentrations showed lower retention of the biotoxin within the cheese protein network. These findings offer valuable insights into the stability and occurrence of PTA, facilitating the monitoring and identification of potential adverse health effects.

Distribution and safety evaluation of deoxynivalenol and its derivatives throughout the wheat product processing chain.

The distribution of deoxynivalenol (DON) and its derivatives 3-acetyldeoxynivalenol (3-Ac-DON) and 15-acetyldeoxynivalenol (15-Ac-DON) throughout the wheat processing chain were systemically evaluated by one-to-one corresponding studies of the whole processing chain. DON and its derivatives were determined by liquid chromatography-mass spectrometry (LC-MS/MS) in wheat grains and corresponding wheat bran, wheat flour, and semi-finished and finished wheat flour-based products. This investigation showed that wheat grain processing to wheat flour significantly decreased the levels of DON by approximately 52.7%-68.2%. Wheat flour processing of wheat flour-based products decreased the DON concentration by approximately 7.0%-70.6%. Among the processing methods, biscuit making showed the largest reduction (70.6%). The co-occurrence frequency of DON with low levels of 3-Ac-DON and 15-Ac-DON was significantly greater in wheat grains and wheat bran than in wheat flour. For wheat flour-based products, only the distribution pattern of 3-Ac-DON was observable in processed wheat flour products prepared using grains heavily contaminated with DON. In China, to the best of our knowledge, the processing factors (PFs) of DON in wheat flour and wheat flour-based products were systematically evaluated for the first time. The average PF of DON was 0.35 for wheat flour and the average PFs were 0.37-0.84 for wheat flour-based products, with biscuits having the smallest PF (0.37), indicating DON significantly decreasing in biscuit making. Furthermore, dietary exposure assessment of DON indicated an acceptable overall health risk in Chinese consumers, with the highest exposure being observed in infants and young children. This study provides important references for classified management of DON limits in wheat and its various products in China.

Effects of thermal processing on natural antioxidants in fruits and vegetables.

Research on the content of polyphenolic compounds in fruits and vegetables, the extraction of bioactive compounds, and the study of their impact on the human body has received growing attention in recent years. This is due to the great interest in bioactive compounds and their health benefits, resulting in increased market demand for natural foods. Bioactive compounds from plants are generally categorized as natural antioxidants with health benefits such as anti-inflammatory, antioxidant, anti-diabetic, anti-carcinogenic, etc. Thermal processing has been used in the food sector for a long history. Implementing different thermal processing methods could be essential in retaining the quality of the natural antioxidant compounds in plant-based foods. A comprehensive review is presented on the effects of thermal blanching (i.e., hot water, steam, superheated steam impingement, ohmic and microwave blanching), pasteurization, and sterilization and drying technologies on natural antioxidants in fruits and vegetables.

Peruvian fava beans for health and food innovation: physicochemical, morphological, nutritional, and techno-functional characterization.

Peruvian fava beans (PFB) are used in traditional cuisine as a nutrient-rich, flavorful, and textural ingredient; however, little is known about their industrial properties. This study evaluated the physicochemical, nutritional, and techno-functional characteristics of PFB varieties: Verde, Quelcao, and Peruanita. PFB exhibited distinct physical characteristics, quality parameters, and morphology. The color patterns of the seed coat and the hardness were the main parameters for distinguishing them. Nutritionally, all three samples exhibited high protein (23.88-24.88 g/100 g), with high proportion of essential amino acids, high dietary fiber (21.74-25.28 g/100 g), and mineral content. They also contain polyphenols (0.79-1.25 mg GAE/g) and flavonoids (0.91-1.06 mg CE/g) with antioxidant potential (16.60-21.01 and 4.68-5.17 µmol TE/g for ABTS and DPPH assays, respectively). Through XRD measurements, the semi-crystalline nature of samples was identified, belonging to the C-type crystalline form. Regarding techno-functionality, PFB flours displayed great foaming capacity, with Verde variety being the most stable. Emulsifying capacity was similar among samples, although Peruanita was more stable during heating. Upon heating with water, PFB flours reached peak viscosities between 175 and 272 cP, and final viscosities between 242 and 384 cP. Quelcao and Verde formed firmer gels after refrigeration. Based on these results, PFB would be useful to developing innovative, nutritious, and healthy products that meet market needs.

Pinhão potential and their parts (failures, shells, and almonds) in the elaboration of yogurts containing acai pulp: physicochemical, nutritional, and functional properties, antimicrobial activity, and multi-elemental profile.

This study applies natural resources, prioritizing recyclable and renewable inputs produced by pinhão cultivation, whose purpose is to use the failures, shells, and almonds as a source of bioactive compounds addition in yogurt, ensuring intelligent use of these natural resources. Thus, one açaí yogurt sample and eight yogurt formulations containing portions of pinhão byproducts between 5 % and 10 % were elaborated. These formulations were compared regarding their physicochemical, nutritional, functional properties, antimicrobial activity, and multi-elemental profile properties. Enriching açaí yogurt with pinhão byproducts does not significantly differ in protein, lipid, moisture, and mineral salt content between all samples with pinhão byproducts. Açaí yogurts enriched with pinhão byproducts had 5.71 to 26.07 % times total protein than the control sample, and total fiber also had a significant increase in samples ranging between 18.62 to 85.29 % times more than the control sample. Regarding color settings, all yogurt samples tended to be red-purple. A sample of açaí yogurt with pine nut flour and whole pine nut flour caused a biofilm mass amount of 46.58, 45.55, and 11.85 % for Listeria monocytogenes, Salmonella enteritidis and Pseudomonas aeruginosa. The behavior of pathogenic bacteria is related to the total polyphenol content in yogurts enriched with pinhão byproducts, which increased from 8.27 to 18.24 mg/100 g. Yogurt with açaí enriched with whole pinhão flour showed high antioxidant capacity. The sample's antioxidant activity results increased by 47.62 % and 130.38 % in the ABTS and DPPH analyses, respectively. The compounds in pinhão failure nanosuspensions, pinhão flour, whole pinhão flour, and yogurts were identified and divided into hydrophilic and lipophilic classes. Five classes (amino acids, organic acids, sugars, phenols, and cyclitols) were identified as hydrophilic. Lipophilic compounds were identified and separated into six classes (carboxylic acids, diterpenes, alcohols, Α-hydroxy acids, sterols, and triterpenes). The addition of pinhão byproducts increased the contents of Ca, Fe, K, Na, and P. Açaí yogurt with pinhão nanosuspension, pinhão flour, and whole pinhão flour had the highest Ca content (2164.38 ± 2.16 µg/L). Açaí yogurt with pinhão flour and whole pinhão flour had the highest Fe content (84.02 ± 0.08 µg/L).

Reduction of antinutrients and off-flavour in kidney bean flour by acidic and alkaline reactive extrusion.

The presence of antinutrients and undesirable flavours in kidney bean flour poses challenges to consumer acceptance. Although extrusion can mitigate antinutrients to some extent, its impact on reducing beany flavour in bean flour remains underexplored. This study investigated the effects of injecting acetic acid or sodium carbonate solutions at three concentration levels (0.05, 0.1, 0.15 mol/L), in conjunction with three temperature profiles (40/60/80/80/90, 40/60/80/90/110, 50/70/90/110/130 °C) and two feed moisture levels (25, 30 %), on the removal of antinutrients (condensed tannins, trypsin inhibitor activity, phytic acid, raffinose family oligosaccharides) and reduction of volatile compounds that contribute to beany flavour in whole kidney bean flour. The results showed that all concentrations of acetic acid and sodium carbonate solutions effectively reduced condensed tannins compared to water, especially at 130 °C extrusion temperature. Introducing acetic acid and sodium carbonate solutions at a concentration of 0.15 mol/L led to 72 and 90 % reduction of total raffinose family oligosaccharide content, respectively, in contrast to the 17 % reduction observed with water alone. The incorporation of sodium carbonate solution reduced the total volatile compounds by 45-58 % as compared with water (23-33 %) and acetic acid (11-27 %). This reduction was primarily due to the reduction of aldehydes, alcohols, and aromatic hydrocarbons. These results indicate that injecting sodium carbonate solution during extrusion can effectively reduce antinutrients and beany flavour compounds in kidney bean flour.

Effect of microwave combined with ethanol pretreatment on the quality of potato CO2 explosion puffing drying.

To enhance the drying quality of potato slices, this investigation employed a microwave heating (MH) combined with ethanol osmotic dehydration (EOD) pretreatment strategy to improve the quality of explosion puffing drying (EPD). This paper systematically investigated the effects of different pretreatment methods (no treatment, HAD, MH, EOD, MH+EOD) on the quality and physicochemical properties of potato slices subjected to CO2-EPD. The results showed that after MH and EOD pretreatments, the internal pores of the potato slices exhibited a uniform porous structure. The MH+EOD+CO2-EPD treatment demonstrated superior expansion, crispness, hardness, and color, with higher retention rates of vitamin C and protein. The measurements were an expansion ratio of 2.15, hardness of 1290.01 g, crispness of 745.94 g, ΔE of 6.54, protein content of 1.99 g/100 g, and VC content of 17.33 mg/100 g. Additionally, the study explored the effects of microwave power, microwave drying time, ethanol concentration, and ethanol soaking time on the expansion ratio, hardness, crispness, protein content, VC content, and color. MH+EOD+CO2-EPD is an environmentally sustainable and efficient solution with potential for widespread industrial application to enhance processing quality and economic benefits.

Characterization of emetic Bacillus cereus biofilm formation and cereulide production in biofilm.

Bacillus cereus is a well-known foodborne pathogen that can cause human diseases, including vomiting caused by emetic toxin, cereulide, requiring 105-108 cells per gram to cause the disease. The bacterial cells may be eliminated during processing, but cereulide can survive in most processing techniques due to its resistance to high temperatures, extreme pH and proteolytic enzymes. Herein, we reported dynamic processes of biofilm formation of four different types and cereulide production within the biofilm. Confocal laser scanning microscopy (CLSM) images revealed that biofilms of the four different types reach each stage at different time points. Among the extracellular polymeric substances (EPS) components of the four biofilms formed by the emetic B. cereus F4810/72 strain, proteins account for the majority. In addition, there are significant differences (p < 0.05) in the EPS components at the same stage among biofilms of different types. The time point at which cereulide was first detected in the four types of biofilms was 24 h. In the biofilm of B. cereus formed in ultra-high-temperature (UHT) milk, the first peak of cereulide appeared at 72 h. The cereulide content of the biofilms formed in BHI was mostly higher than that of the biofilms formed in UHT milk. This study contributes to a better understanding of food safety issues in the industry caused by biofilm and cereulide toxin produced by B. cereus.

Onopordum platylepis (Murb.) Murb. as a novel source of thistle rennet: First application to the manufacture of traditional Italian raw ewe's milk cheese.

In this study, for the very first time, aqueous extracts obtained from flowers of spontaneously grown or cultivated Onopordum platylepis (Murb.) Murb. thistles were used as coagulating agents for the pilot-scale manufacture of Caciofiore, a traditional Italian raw ewe's milk cheese. Cheese prototypes were compared to control cheeses curdled with a commercial thistle rennet obtained from flowers of Cynara cardunculus L. After 45 days of ripening under controlled conditions, both the experimental and control cheese prototypes were analyzed for: cheese yield, physico-chemical (pH, titratable acidity, aw, proximate composition), morpho-textural (color and texture), and microbiological parameters (viable cell counts and species composition assessed by Illumina sequencing), as well as volatile profile by SPME-GC-MS. Slight variations in titratable acidity, color, and texture were observed among samples. Based on the results overall collected, neither the yield nor the proximate composition was apparently affected by the type of thistle coagulant. However, the experimental cheese prototypes curdled with extracts from flowers of both spontaneous or cultivated thistles showed 10 % higher values of water-soluble nitrogen compared to the control prototypes. On the other hand, these latter showed slightly higher loads of presumptive lactococci, thermophilic cocci, coliforms, and eumycetes, but lower counts of Escherichia coli. No statistically significant differences were revealed by the metataxonomic analysis of the bacterial and fungal biota. Though most volatile organic compounds (VOCs) were consistent among the prototypes, significant variability was observed in the abundance of some key aroma compounds, such as butanoic, hexanoic, and octanoic acids, ethanol, propan-2-ol, isobutyl acetate, 2-methyl butanoic acid, and 3-methyl butanal. However, further investigations are required to attribute these differences to either the type of coagulant or the metabolic activity of the microorganisms occurring in the analyzed cheese samples. The results overall collected support the potential exploitation of O. platylepis as a novel source of thistle coagulant to produce ewe's milk cheeses.

Changes in polyphenolic compounds and antioxidant activity of Japanese pickled apricot with salted red perilla leaf during pickling and digestion process.

Japanese pickled apricot, called "umeboshi", is a traditional food that has experientially been consumed as a folk medicine. The main variation of umeboshi is called "shiso-zuke umeboshi", meaning pickled with red perilla leaves to add a colorful appearance. This study investigated changes in phenolics and antioxidant potential of shiso-zuke umeboshi during pickling processes and simulated digestion. Results showed that the red perilla pickling (PP; 1338.12) had 13 times higher phenolics than salt pickling (SP; 101.99) in µg/g DW, and the formation of rosmarinic acid was enhanced. The simulated digestion showed a gradual increase in antioxidant content and activity from the stomach to small intestine, with TPC and TFC being rapidly released in the intestinal environment. The study concluded that shiso-zuke umeboshi provides higher health benefits due to the excellent antioxidant compounds produced through the perilla pickling process.

Investigation of oligosaccharides and allulose as sucrose replacers in low-moisture wire-cut cookies.

Non-digestible oligosaccharides (OS) and allulose have beneficial health properties and could reduce the amount of added sugar in baked goods. In this study allulose and various OS [fructo-oligosaccharides (FOS), galacto-oligosaccharides (GOS), lactosucrose (LOS), isomalto-oligosaccharides (IMO), Promitor 70R (P70R), and xylo-oligosaccharides (XOS)] were added to a wire-cut cookie formulation at concentrations determined to have similar effects on the gelatinization temperature (Tgel) of starch relative to sucrose. Different baking performance attributes of the doughs and cookies were assessed, including: appearance, spread, color, texture, and % moisture loss after baking. The results were correlated to: OS solution and solid properties and OS effects on starch thermal events (gelatinization, pasting, and retrogradation). The Tgel-matching formulation protocol was effective in producing reduced-sugar cookies which had similar appearance, color, and spread attributes compared to the sucrose control; however, cookie texture significantly varied. Cookies containing allulose were the least similar to the control, having darker color, reduced spread, and softer cake-like texture. The only OS cookies that matched the texture of the sucrose control contained LOS, while P70R cookies were the hardest. Cookie texture correlated strongly with the % total moisture loss after baking (r = -0.8763) and was best explained by OS solution viscosity: more viscous OS solutions limited moisture release and resulted in harder cookies. The Tgel of starch also correlated with OS solution viscosity (r = 0.7861) and should be accounted for in reduced sugar applications. The OS recommended as sucrose replacers in cookies based on principal component analysis groupings were: XOS > IMO > LOS > and GOS.

Unconventional sourced proteins in 3D and 4D food printing: Is it the future of food processing?

Following consumer trends and market needs, the food industry has expanded the use of unconventional sources to obtain proteins. In parallel, 3D and 4D food printing have emerged with the potential to enhance food processing. While 3D and 4D printing technologies show promising prospects for improving the performance and applicability of unconventional sourced proteins (USP) in food, this combination remains relatively unexplored. This review aims to provide an overview of the application of USP in 3D and 4D printing, focusing on their primary sources, composition, rheological, and technical-functional properties. The drawbacks, challenges, potentialities, and prospects of these technologies in food processing are also examined. This review underscores the current necessity for greater regulation of food products processed by 3D and 4D printing. The data presented here indicate that 3D and 4D printing represent viable, sustainable, and innovative alternatives for the food industry, emphasizing the potential for further exploration of 4D printing in food processing. Additional studies are warranted to explore their application with unconventional proteins.