Exploring the In Vitro and In Vivo Therapeutic Efficacy of Juniperus oxycedrus Cade Oil: Antioxidant, Anti-inflammatory, and Anti-asthmatic Effects in an Allergic Asthma Model.

This investigation aimed to explore the antioxidant, anti-inflammatory effects of Cade oil and its efficacy within a Wistar allergic asthma model. The antioxidant activity was assessed through various in vitro tests using chain-breaking antioxidant effects (radical scavenging and reducing abilities assays).  In vivo experiments involved Wistar rats categorized into four groups: negative control group, Ovalbumin-sensitised/challenged group, Cade oil-treated group, and Ovalbumin-sensitised/challenged Cade oil-treated group. These experiments aimed to evaluate oxidative stress parameters in the lungs and erythrocytes. The results indicated that the Cade oil exhibited significant antioxidant capabilities, evidenced by its radical scavenging activity against DPPH, ABTS, and Galvinoxyl radicals, with IC50 values ranging from 21.92 to 24.44 µg/mL. Besides, the reducing abilities methods showed A0,5 value ranging from 11.51 to 30.40  µg/mL for reducing power, Cupric ion reducing antioxidant capacity, and O-phenanthroline assays. Additionally, the IC50 value for ß-carotene scavenging was found to be (8.2 ± 0.25 µg/ml). Analysis revealed high levels of polyphenols and flavonoids in Cade oil, indicating rich polyphenol (275.21 ± 3.14 mg GAE/g DW) and flavonoid (28.23 ± 1.91 µg QE/mg) content. In vivo findings highlighted Cade oil's efficacy in reducing inflammatory cell recruitment, enhancing antioxidant status, reducing lipid peroxidation, and improving histopathological alterations within the allergic asthma model. These results demonstrated that Cade oil has a potent antioxidant, anti-inflammatory, and anti-asthmatic properties, suggesting its potential therapeutic application in asthma treatment.

[Simultaneous determination of 21 perfluorinated and polyfluoroalkyl substances in plant oils by ultra-high performance liquid chromatography-triple quadrupole mass spectrometry].

Edible plant oils are a key component of the daily human diet, and the quality and safety of plant oils are related to human health. Perfluorinated and polyfluoroalkyl substances (PFASs) are pollutants that can contaminate plant oil through the processing of raw materials or exposure to materials containing these substances. Thus, establishing a sensitive and accurate analytical method for the determination of PFASs is critical for ensuring the safety of plant oils. In this study, a method based on acetonitrile extraction and solid phase extraction purification combined with ultra-high performance liquid chromatography-triple quadrupole mass spectrometry (UHPLC-MS/MS) was developed for the simultaneous determination of 21 PFASs, including perfluorocarboxylic acids, perfluoroalkyl sulfonic acids, and fluorotelomer sulfonic acids, in edible plant oils. The chromatographic conditions and MS parameters were optimized, and the influences of the extraction solvents and purification method were systematically studied. Plant oil samples were directly extracted with acetonitrile and purified using a weak anion-exchange (WAX) column. The 21 target PFASs were separated on a reversed-phase C18 chromatographic column and detected using a triple quadrupole mass spectrometer with an electrospray ionization source. The mass spectrometer was operated in negative-ion mode. The target compounds were analyzed in multiple reaction monitoring (MRM) mode and quantified using an internal standard method. The results demonstrated that the severe interference observed during the detection of PFASs in the co-extracted substances was completely eliminated after the extraction mixture was purified using a WAX column. The 21 target PFASs showed good linearity in their corresponding ranges, with correlation coefficients greater than 0.995. The limits of detection (LODs) and limits of quantification (LOQs) of the method were in the range of 0.004-0.015 and 0.015-0.050 µg/kg, respectively. The recoveries ranged from 95.6% to 115.8%, with relative standard deviations (RSDs) in the range of 0.3%-10.9% (n=9). The established method is characterized by simple sample pretreatment, good sensitivity, high immunity to interferences, and good stability, rendering it suitable for the rapid analysis and accurate determination of typical PFASs in edible plant oils.

Metabolic profiling and enzyme inhibitory activity of the essential oil of citrus aurantium fruit peel.

BACKGROUND: Bitter orange (Citrus aurantium) is a fruiting shrub native to tropical and subtropical countries around the world and cultivated in many regions due to its nutraceutical value. The current study investigated the metabolic profiling and enzyme inhibitory activities of volatile constituents derived from the C. aurantium peel cultivated in Egypt by three different extraction methods. METHODS: The volatile chemical constituents of the peel of C. aurantium were isolated using three methods; steam distillation (SD), hydrodistillation (HD), and microwave-assisted hydrodistillation (MAHD), and then were investigated by GC-MS. The antioxidant potential was evaluated by different assays such as DPPH, ABTS, FRAP, CUPRAC, and phosphomolybdenum and metal chelating potential. Moreover, the effect of enzyme inhibition of the three essential oils was tested using BChE, AChE, tyrosinase, glucosidase, as well as amylase assays. RESULTS: A total of six compounds were detected by GC/MS analysis. The major constituent obtained by all three extraction methods was limonene (98.86% by SD, 98.68% by HD, and 99.23% by MAHD). Differences in the composition of the compounds of the three oils were observed. The hydrodistillation technique has yielded the highest number of compounds, notably two oxygenated monoterpenes: linalool (0.12%) and α-terpineol acetate (0.1%). CONCLUSION: In our study differences in the extraction methods of C. aurantium peel oils resulted in differences in the oils' chemical composition. Citrus essential oils and their components showed potential antioxidant, anticholinesterase, antimelanogenesis, and antidiabetic activities. The presence of linalool and α-terpineol acetate may explain the superior activity observed for the oil isolated by HD in both radical scavenging and AChE inhibition assays, as well as in the enzyme inhibition assays.

Kinetics of Squalene Quenching Singlet Oxygen and the Thermal Degradation Products Identification.

Squalene has been proven to possess various bioactive functions that are widely present in vegetable oils. A more comprehensive understanding of the reaction behavior of squalene under oxidative conditions was achieved by studying its antioxidant capacity and thermal degradation products. The total singlet oxygen quenching rate constant (kr + kq) of squalene was 3.8 × 107 M-1 s-1, and both physical and chemical quenching mechanisms equally contribute to the overall singlet oxygen quenching. Fourteen degradation products of squalene were identified at 180 °C by using gas chromatography-mass spectrometry (GC-MS). Combining with DFT calculations, the thermal degradation pathway of squalene was proposed: the aldehydes, ketones, and alcohols, and epoxy compounds were formed by the homolytic cleavage of squalene hydroperoxides to form alkoxy radicals, followed by ß-scission of the alkoxyl radicals at adjacent C-C bonds or intramolecular cyclization.

Lavandula angustifolia Essential Oil Inhibits the Ability of Fusobacterium nucleatum to Produce Volatile Sulfide Compounds, a Key Components in Oral Malodor.

Oral malodor still constitutes a major challenge worldwide. A strong effort is invested in eliminating volatile sulfur compound-producing oral bacteria through organic natural products such as essential oils. Fusobacterium nucleatum is a known volatile sulfur compound-producing bacteria that inspires oral malodor. The aim of the present study was to test the effect of lavender essential oil on the bacterium's ability to produce volatile sulfide compounds, the principal components of oral malodor. Lavender (Lavandula angustifolia) essential oil was extracted by hydrodistillation and analyzed using GC-MS. The minimal inhibitory concentration (MIC) of lavender essential oil on Fusobacterium nucleatum was determined in a previous trial. Fusobacterium nucleatum was incubated anaerobically in the presence of sub-MIC, MIC, and above MIC concentrations of lavender essential oil, as well as saline and chlorhexidine as negative and positive controls, respectively. Following incubation, volatile sulfur compound levels were measured using GC (Oralchroma), and bacterial cell membrane damage was studied using fluorescence microscopy. Chemical analysis of lavender essential oil yielded five main components, with camphor being the most abundant, accounting for nearly one-third of the total lavender essential oil volume. The MIC (4 µL/mL) of lavender essential oil reduced volatile sulfur compound secretion at a statistically significant level compared to the control (saline). Furthermore, the level of volatile sulfur compound production attributed to 1 MIC of lavender essential oil was in the range of the positive control chlorhexidine with no significant difference. When examining bacterial membrane damage, 2 MIC of lavender essential oil (i.e., 8 µL/mL) demonstrated the same, showing antibacterial membrane damage values comparative to chlorhexidine. Since lavender essential oil was found to be highly effective in hindering volatile sulfur compound production by Fusobacterium nucleatum through the induction of bacterial cell membrane damage, the results suggest that lavender essential oil may be a suitable alternative to conventional chemical-based anti-malodor agents.

The Impact of Beeswax and Glycerol Monolaurate on Camellia Oil Oleogel's Formulation and Application in Food Products.

This study assessed the nutritional profile of camellia oil through its fatty acid composition, highlighting its high oleic acid content (81.4%), followed by linoleic (7.99%) and palmitic acids (7.74%), demonstrating its excellence as an edible oil source. The impact of beeswax (BW) and glycerol monolaurate (GML) on camellia oil oleogels was investigated, revealing that increasing BW or GML concentrations enhanced hardness and springiness, with 10% BW oleogel exhibiting the highest hardness and springiness. FTIR results suggested that the structure of the oleogels was formed by interactions between molecules without altering the chemical composition. In biscuits, 10% BW oleogel provided superior crispness, expansion ratio, texture, and taste, whereas GML imparted a distinct odor. In sausages, no significant differences were observed in color, water retention, and pH between the control and replacement groups; however, the BW group scored higher than the GML group in the sensory evaluation. The findings suggest that the BW oleogel is an effective fat substitute in biscuits and sausages, promoting the application of camellia oil in food products.

Antithrombotic Effect of Oil from the Pulp of Bocaiúva-Acrocomia aculeata (Jacq.) Lodd. ex Mart. (Arecaceae).

The study aimed to evaluate the antithrombotic action of Acrocomia aculeata pulp oil (AAPO) in natura, in an in vitro experimental model. AAPO was obtained by solvent extraction, and its chemical characterization was performed by gas chromatography coupled to a mass spectrometer (GC-MS). In vitro toxicity was evaluated with the Trypan Blue exclusion test and in vivo by the Galleria mellonella model. ADP/epinephrine-induced platelet aggregation after treatment with AAPO (50, 100, 200, 400, and 800 µg/mL) was evaluated by turbidimetry, and coagulation was determined by prothrombin activity time (PT) and activated partial thromboplastin time (aPTT). Platelet activation was measured by expression of P-selectin on the platelet surface by flow cytometry and intraplatelet content of reactive oxygen species (ROS) by fluorimetry. The results showed that AAPO has as major components such as oleic acid, palmitic acid, lauric acid, caprylic acid, and squalene. AAPO showed no toxicity in vitro or in vivo. Platelet aggregation decreased against agonists using treatment with different concentrations of AAPO. Oil did not interfere in PT and aPTT. Moreover, it expressively decreased ROS-induced platelet activation and P-selectin expression. Therefore, AAPO showed antiplatelet action since it decreased platelet activation verified by the decrease in P-selectin expression as well as in ROS production.

Investigating the effects of oil type, emulsifier type, and emulsion particle size on textured fibril soy protein emulsion-filled gels and soybean protein isolate emulsion-filled gels.

The effects of oil type, emulsifier type, and emulsion particle size on the texture, gel strength, and rheological properties of SPI emulsion-filled gel (SPI-FG) and TFSP emulsion-filled gel (TFSP-FG) were investigated. Using soybean protein isolate or sodium caseinate as emulsifiers, emulsions with cocoa butter replacer (CBR), palm oil (PO), virgin coconut oil (VCO), and canola oil (CO) as oil phases were prepared. These emulsions were filled into SPI and TFSP gel substrates to prepare emulsion-filled gels. Results that the hardness and gel strength of both gels increased with increasing emulsion content when CBR was used as the emulsion oil phase. However, when the other three liquid oils were used as the oil phase, the hardness and gel strength of TFSP-FG decreased with the increasing of emulsion content, but those of SPI-FG increased when SPI was used as emulsifier. Additionally, the hardness and gel strength of both TFSP-FG and SPI-FG increased with the decreasing of mean particle size of emulsions. Rheological measurements were consistent with textural measurements and found that compared with SC, TFSP-FG, and SPI-FG showed higher G' values when SPI was used as emulsifier. Confocal laser scanning microscopy (CLSM) observation showed that the distribution and stability of emulsion droplets in TFSP-FG and SPI-FG were influenced by the oil type, emulsifier type and emulsion particle size. SPI-stabilized emulsion behaved as active fillers in SPI-FG reinforcing the gel matrix; however, the gel matrix of TFSP-FG still had many void pores when SPI-stabilized emulsion was involved. In conclusion, compared to SPI-FG, the emulsion filler effect that could reinforce gel networks became weaker in TFSP-FG.

Comparison of quantity, quality and antibacterial activity of essential oil Mentha longifolia (L.) L. under different traditional and modern extraction methods.

Extraction is the first and most important step in obtaining the effective ingredients of medicinal plants. Mentha longifolia (L.) L. is of considerable economic importance as a natural raw material for the food and pharmaceutical industries. Since the effect of different extraction methods (traditional and modern methods) on the quantity, quality and antimicrobial activity of the essential oil of this plant has not been done simultaneously; the present study was designed for the first time with the aim of identifying the best extraction method in terms of these features. For this purpose, extracting the essential oil of M. longifolia with the methods of hydrodistillation with Clevenger device (HDC), steam distillation with Kaiser device (SDK), simultaneous distillation with a solvent (SDE), hydrodistillation with microwave device (HDM), pretreatment of ultrasonic waves and Clevenger (U+HDC) and supercritical fluid (SF) were performed. Chemical compounds were identified by gas chromatography coupled with mass spectrometer (GC-MS). Antimicrobial activity of essential oils against various clinical microbial strains was evaluated by agar diffusion method and determination of the minimum inhibitory concentration and minimum bactericidal concentration (MIC and MBC). The results showed that the highest and lowest yields of M. longifolia leaf essential oil belonged to HDC (1.6083%) and HDM (0.3416%). The highest number of compounds belonged to SDK essential oil and was equal to 72 compounds (with a relative percentage of 87.13%) and the lowest number of compounds was related to the SF essential oil sample (7 compounds with a relative percentage of 100%). Piperitenone (25.2-41.38%), piperitenone oxide (22.02-0%), pulegone (10.81-0%) and 1,8-cineole (5-35.0%) are the dominant and main components of M. longifolia essential oil were subjected to different extraction methods. Antimicrobial activity results showed that the lowest MIC value belonged to essential oils extracted by HDM, SDK, SDE and U+HDC methods with a value of 1000 µg/mL was observed against Gram-negative bacteria Shigella dysenteriae, which was 5 times weaker than rifampin and 7 times weaker than gentamicin. Therefore, it can be concluded that in terms of efficiency of the HDC method, in terms of the percentage of compounds of the HDM method, and in terms of microbial activity, the SDK, HDM and U+HDC methods performed better.

One-pot, microwave (MW)-assisted production of furfural from almond-, oil-, and wine-derived co-products through biorefinery-based approaches.

This work outlines the first microwave (MW)-assisted protocol for the production of biofuel precursor furfural (FF) from the raw agricultural waste almond hull (AH), olive stone (OS), and the winemaking-derived grape stalk (GS), grape marc (GM) and exhausted grape marc (EGM) through a one-pot synthesis process. To enhance the overall yield, a catalytic process was firstly developed from xylose, major constituent of hemicellulose present in lignocellulosic biomass. This method afforded FF with 100 % selectivity, yielding over 85 % in isolated product when using H2SO4, as opposed to a 37 % yield with AlCl3·6H2O, at 150 °C in only 10 min. For both catalysts, the developed methodology was further validated, proving adaptable and efficient in producing the targeted FF from the aforementioned lignocellulosic raw materials. More specifically, the employment of AlCl3·6H2O resulted in the highest selectivity (up to 89 % from GM) and FF yield (42 % and 39 % molar from OS and AH, respectively), maintaining notable selectivity for the latter (61 and 48 % from AH and OS). At this regard, and considering the environmental factor of sustainability, it is important to point out the role of AlCl3·6H2O in contrast to H2SO4, thus mitigating detrimental substances. This study provides an important management of agricultural waste through sustainable practises for the development of potential bio-based chemicals, aligning with Green Chemistry and process intensification principles.

Valorization of Carapa guianensis Aubl. seeds treated by compressed n-propane.

This study evaluated the oil content obtained from andiroba seeds by pressurized n-propane at different conditions of temperature (25, 35, and 45 °C) and pressure (40, 60, and 80 bar), and conventional extraction technique using n-hexane as the solvent. Kinetic extraction curves were fitted using Sovová's mathematical model. The chemical characterization of the oil was reported as well as the protein content in the extraction by-product. Pressurized extractions conducted at 25 °C provided the highest oil recovery (~45 wt%) from the seeds. The increase in pressure at 25 ºC favored obtaining oil with higher Stigmasterol contents, however, the Squalene content was higher in the oil obtained at 40 bar. The oils with the highest concentration phenolic compounds and antioxidant activity were obtained at 80 bar. Extraction with n-propane provided oils with higher levels of phenolic compounds, however, with antioxidant activity similar to conventional extraction. For all evaluated extractions, the product showed a predominance of oleic and palmitic acids, with similar values of oxidative stability. The extraction of the by-product with the highest soluble protein content was obtained under mild processing conditions (25 °C and 40 bar) with n-propane.

Quality and stability of frying oils and fried foods in ultrasound and microwave-assisted frying processes and hybrid technologies.

Frying is a popular cooking method that produces delicious and crispy foods but can also lead to oil degradation and the formation of health-detrimental compounds in the dishes. Chemical reactions such as oxidation, hydrolysis, and polymerization contribute to these changes. In this context, emerging technologies like ultrasound-assisted frying (USF) and microwave (MW)-assisted frying show promise in enhancing the quality and stability of frying oils and fried foods. This review examines the impact of these innovative technologies, delving into the principles of these processes, their influence on the chemical composition of oils, and their implications for the overall quality of fried food products with a focus on reducing oil degradation and enhancing the nutritional and sensory properties of the fried food. Additionally, the article initially addresses the various reactions occurring in oils during the frying process and their influencing factors. The advantages and challenges of USF and MW-assisted frying are also highlighted in comparison to traditional frying methods, demonstrating how these innovative techniques have the potential to improve the quality and stability of oils and fried foods.

Antimicrobial properties of WCO-based composites enriched with hops and curly sorrel for green building solutions.

Modern production of vegetable oils has reached impressive levels, and the ever-growing quantities of waste cooking oil (WCO) provide a local source of raw materials for innovative materials. The WCO composite production process involves a series of reactions, including polymerisation, esterification, and transesterification, which lead to the hardening of composite materials. In light of the growing problem of bacterial and fungal diseases, materials with high strength properties and biocidal properties are being sought. Fungal infections of the skin are a widespread problem, and the number of cases is steadily increasing. This article presents a study of the antibacterial potential of WCO-based composites enriched with hops or sorrel root in the context of their application in the construction industry. The compressive and flexural strength of the oil composites, their absorbability and hydrophobicity, and their effects on Gram-positive (S. aureus and S. epidermidis) and Gram-negative (E. coli and P. aeruginosa) bacteria and fungi (A. niger, P. anomala) were investigated. Maximum split tensile strength (4.3 MPa) and flexural strength (5.1 MPa) were recorded for oil-hop composites. Oil composites enriched with curly sorrel and hops showed antibacterial activity against S. aureus at 27% and 25%. High biocidal activity (up to 70%) was recorded against E. coli and against S. epidermidis (up to 99%) due to the action of composites with curly sorrel. The antifungal activities of composites with hops was 15% and 19% for P. anomala and A. niger, respectively, while with curly sorrel they were 42% and 30%.

Lipidomics and metabolomics reveal the molecular mechanisms underlying the effect of thermal treatment on composition and oxidative stability of walnut oil.

Roasting walnut kernel significantly improves the oxidative stability and sensory properties of its oil. However, the effect of roasting temperatures on the molecular change of main components and micronutrients in walnut oil is still unclear. Herein, lipidomics and metabolomics were integrated to comprehensively profile the walnut oil obtained at different roasting temperatures (30 °C, 120 °C, 140 °C, 160 °C, and 180 °C). Lipidomics showed that the content of glycerolipids, sphingolipids, and glycerophospholipids decreased with roasting temperatures, while the oxidized fatty acids and triglycerides increased. Ratios of linoleic acid and linolenic acid varied with roasting temperatures and were most close to 4-6:1 at 140 °C, 160 °C, and 180 °C. Major classes of micronutrients showed a tendency to increase at the roasting temperature of 120 °C and 140 °C, then decrease at 160 °C and 180 °C. Liposoluble amino acids identified for the first time in walnut oil varied with roasting temperatures. Correlation analysis demonstrated that the higher contents of liposoluble amino acids and phenolics are positively associated with enhanced oxidative stability of walnut oil obtained at 140 °C. Furthermore, glutamine and 5-oxo-D-proline were expected to be potential biomarkers to differentiate the fresh and roasted walnut oil. The study is expected to provide new insight into the change mechanism of both major lipids and micronutrients in walnut oil during the roasting process.

Human milk fat substitutes rich in 1,3-dioleoyl-2-palmitoylglycerol and 1-oleoyl-2-palmitoyl-3-linoleoylglycerol simultaneously: Preparation strategy and simulated infant in vitro digestion.

In this study, fractionated palm stearin, oleic acid, and linoleic acid were selected as the base materials to prepare human milk fat substitutes (HMFS) rich in OPO and OPL by enzymatic acidolysis combined with physical blending. Under optimum conditions, contents of OPO, OPL, and sn-2 palmitic acid in the OPO and OPL-rich triacylglycerols (TAGs) were higher than that in commercial OPO-rich TAGs, with values of 37.25%, 28.12%, and 79.44%, respectively. Physical blending the OPO and OPL-rich TAGs (47%), bovine milk fat (18%), sunflower oil (13%), coconut oil (13%), corn oil (8%), and palm oil (1%) can obtain HMFS with a fat composition that like HMF. The fatty acid, sn-2 saturated fatty acid, and TAG contents of HMFS were within the lower and upper limit of HMF. The lipolysis degree of infant formula (IF) with HMFS as fat source is 9.0% higher than that of commercial plant oil-based infant formula (PIF), and 3.4% lower than that of human milk. IF with HMFS as fat source released less saturated free fatty acids and more saturated monoacylglycerols during digestion than that of PIF, which would help improve the IF fat utilization by infants.

Interactive roles of co-solvents and lemon-oil composition in the fabrication of dilutable clear emulsions.

Clear emulsions are used as flavor carriers by the beverage industry because of their favorable optical properties. A transparent microemulsion with small droplets requires a high concentration of surfactants, and is often non-dilutable, posing a significant challenge to their application in the food industry. The formation of dilutable microemulsions by modulating the compatibility of oil composition and co-solvents was studied. While single-fold lemon oil exhibited poor loading capacity overall, no precipitation occurred due to the stronger interaction between monoterpenes and sucrose monopalmitate (SMP). Conversely, emulsification of five-fold lemon oil with 20 % ethanol demonstrated a higher loading capacity and a stronger dilution stability than other lemon oils. This is likely due to the balanced composition of surface-active monoterpenes and other components in five-fold lemon oil which facilitated the effective use of micellar space and aided in the retention of both surfactants and co-solvents post-dilution. The emulsification of higher-folded lemon oil, however, was favored by the use of propylene glycol as a surfactant exhibiting stronger dilution stability than ethanol, though it required twice as much co-solvent. The high concentration of surface-active monoterpene in the lower-folded lemon oils competes with propylene glycol for interfacial incorporation. This study demonstrated that co-solvents and oil composition play interactive roles in producing dilutable optically clear emulsions, and it provides a blueprint for the food industry to design colloidal systems using a minimum of surfactants.

Chemical Composition and Lipid Bioactive Components of Centaurea thracica Dwelling in Bulgaria.

Centaurea thracica (Janka) Hayek is a plant common in southern Bulgaria. The inflorescences were collected during June and September 2021, while their seeds were obtained in September 2021. The chemical and lipid composition of the inflorescences during the vegetation process of the plant were established. A significant decrease in total proteins (from 8.7 to 7.4%), glyceride oils (2.0-1.7%), and ash (4.5-4.2%) content was observed, while the amount of carbohydrates (72.3-77.2%) and fibers (28.7-35.8%) increased. During the vegetation of the plant, the content of oleic and linoleic acids increased up to 2-3 times, while the level of palmitic acid decreased. The lipids from the seeds were rich in oleic (53.0%) and palmitic (36.2%) acids. The tocopherol content in the oils of the inflorescences during vegetation increased from 58 to 110 mg/kg, and the content in the oil from the seeds was 260 mg/kg. The phospholipid content decreased during vegetation, and differences were observed in the composition between the inflorescences and the seeds. The high content of oleic acid, linoleic acid, tocopherols, and phospholipids determine the nutritional and biological value of the oils isolated from Centaurea thracica, and contribute to their potential use in various directions.

Repellency, Toxicity, and Chemical Composition of Plant Essential Oils from Myrtaceae against Asian Citrus Psyllid, Diaphorina citri Kuwayama (Hemiptera Liviidae).

Diaphorina citri Kuwayama (D. citri) is one of the major pests in the citrus industry, which spreads Citrus Huanglongbing disease. It has developed resistance to chemical insecticides. Therefore, searching for greener solutions for pest management is critically important. The main aim of this study was to evaluate the repellent and insecticidal efficacy of essential oils (EOs) from four species of Myrtaceae plants: Psidium guajava (PG), Eucalyptus robusta (ER), Eucalyptus tereticornis (ET), and Baeckea frutescens (BF) against D. citri and to analyze their chemical compositions. GC-MS analysis was performed, and the results indicated that the EOs of PG, ER, ET, and BF were rich in terpenoids, ketones, esters, and alcohol compounds. The repellent rate of all four EOs showed that it decreased with exposure time but increased with the concentration of EOs from 80.50% to 100.00% after treating D. citri for 6 h with four EOs at 100% concentration and decreased to 67.71% to 85.49% after 24 h of exposure. Among the compounds from the EOs tested, eucalyptol had the strongest repellent activity, with a 24 h repellency rate of 100%. The contact toxicity bioassay results showed that all EOs have insecticidal toxicity to D. citri; the LC50 for nymphs was 36.47-93.15 mL/L, and for adults, it was 60.72-111.00 mL/L. These results show that when PG is used as the reference material, the ER, ET, and BF EOs have strong biological activity against D. citri, which provides a scientific basis for the further development of plant-derived agrochemicals.

A chemometric approach to assess the oil composition and content of microwave-treated mustard (Brassica juncea) seeds using Vis-NIR-SWIR hyperspectral imaging.

The wide gap between the demand and supply of edible mustard oil can be overcome to a certain extent by enhancing the oil-recovery during mechanical oil expression. It has been reported that microwave (MW) pre-treatment of mustard seeds can have a positive effect on the availability of mechanically expressible oil. Hyperspectral imaging (HSI) was used to understand the change in spatial spread of oil in the microwave (MW) treated seeds with bed thickness and time of exposure as variables, using visible near-infrared (Vis-NIR, 400-1000 nm) and short-wave infrared (SWIR, 1000-1700 nm) systems. The spectral data was analysed using chemometric techniques such as partial least square discriminant analysis (PLS-DA) and regression (PLSR) to develop prediction models. The PLS-DA model demonstrated a strong capability to classify the mustard seeds subjected to different MW pre-treatments from control samples with a high accuracy level of 96.6 and 99.5% for Vis-NIR and SWIR-HSI, respectively. PLSR model developed with SWIR-HSI spectral data predicted (R2 > 0.90) the oil content and fatty acid components such as oleic acid, erucic acid, saturated fatty acids, and PUFAs closest to the results obtained by analytical techniques. However, these predictions (R2 > 0.70) were less accurate while using the Vis-NIR spectral data.

Structure Engineering of Ni/SiO2 Vegetable Oil Hydrogenation Catalyst via CeO2.

Inspired by our finding that metallic Ni particles could be uniformly distributed on a reduced CeO2 surface and stabilized on Ce3+ sites, we suppose a possible improvement in the activity and selectivity of the MgNi/SiO2 vegetable oil hydrogenation catalyst by increasing the surface metal Ni availability via modification by ceria. The proposed approach involved the addition of a CeO2 modifier to the SiO2 carrier and as a catalyst component. Evaluation of the structure, reducibility, and surface and electronic states of the CeO2-doped MgNi/SiO2 catalyst was performed by means of the Powder X-ray diffraction (PXRD), Scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS), and X-ray photoelectron spectroscopy (XPS) combined with High-resolution transmission electron microscopy (HRTEM), Temperature-programmed reduction with hydrogen (H2-TPR), and H2-chemisortion techniques. So far, no studies related to this approach of designing Ni/SiO2 catalysts for the partial hydrogenation of vegetable oil have been reported. The added ceria impact was elucidated by comparing fatty acid compositions obtained by the catalysts at an iodine value of 80. In summary, tuning the hydrogenation performance of Ni-based catalysts can be achieved by structural reconstruction using 1 wt.% CeO2. The introduction mode changed the selectivity towards C18:1-cis and C18:0 fatty acids by applying ceria as a carrier modifier, while hydrogenation activity was improved upon ceria operation as the catalyst dopant.