Formation of self-assembled fibril aggregates of trypsin-controllably hydrolyzed soy protein and its regulation on stability of high internal phase Pickering emulsions.

The mechanisms of trypsin hydrolysis time on the structure of soy protein hydrolysate fibril aggregates (SPHFAs) and the stability of SPHFAs-high internal phase Pickering emulsions (HIPPEs) were investigated. SPHFAs were prepared using soy protein hydrolysate (SPH) with different trypsin hydrolysis time (0 min-120 min) to stabilize SPHFAs-HIPPEs. The results showed that moderate trypsin hydrolysis (30 min, hydrolysis degree of 2.31 %) induced SPH unfolding and increased the surface hydrophobicity of SPH, thereby promoting the formation of flexible SPHFAs with maximal thioflavin T intensity and ζ-potential. Moreover, moderate trypsin hydrolysis improved the viscoelasticity of SPHFAs-HIPPEs, and SPHFAs-HIPPEs remained stable after storage at 25 °C for 80 d and heating at 100 °C for 1 h. Excessive trypsin hydrolysis (> 30 min) decreased the stability of SPHFAs-HIPPEs. In conclusion, moderate trypsin hydrolysis promoted the formation of flexible SPHFAs with high surface charge by inducing SPH unfolding, thereby promoting the stability of SPHFAs-HIPPEs.

Highly ordered aggregation of soy protein isolate particles for enhanced gel-related properties through konjac glucomannan addition.

This study assessed the effect of konjac glucomannan (KGM) on the aggregation of soy protein isolate (SPI) and its gel-related structure and properties. Raman results showed that KGM promoted the rearrangement of SPI to form more ß-sheets, contributing to the formation of an ordered structure. Atomic force microscopy, confocal laser scanning microscopy, and small-angle X-ray scattering results indicated that KGM reduced the size of SPI particles, narrowed their size distribution, and loosened the large aggregates formed by the stacking of SPI particles, improving the uniformity of gel system. As the hydrogen bonding between the KGM and SPI molecules enhanced, a well-developed network structure was obtained, further reducing the immobilized water's content (T22) and increasing the water-holding capacity (WHC) of SPI gel. Furthermore, this gel structure showed improved gel hardness and resistance to both small and large deformations. These findings facilitate the design and production of SPI-based gels with desired performance.

The structure-function relationships and techno-functions of ß-conglycinin.

ß-conglycinin (ß-CG) is a prominent storage protein belonging to the globulin family in soybean (Glycine max) seeds. Along with other soybean proteins, it serves as an important source of essential amino acids and high-quality nutrition. However, the digestibility and nutritional value of ß-CG are key factors affecting the nutritional profile of soy-based foods. The heterotrimeric, secondary, and quaternary structures of ß-CG, particularly the spatial arrangement of its α, α', and ß subunits, influence its functional properties. Considering these aspects, ß-CG emerges as a significant protein with diverse applications in the food and health sectors. Therefore, this review explores ß-CG's composition, structure, function, health implications, and industrial uses. Salient discussions are presented on its molecular structure, nutrition, digestibility, allergenicity, and techno-functions including emulsification, solubility, gelling, and structure-function complexities. Overall, the multifaceted potential of ß-CG in the healthcare sector and the food industry is evident.

Fabrication, digestion behavior and ß-carotene bioaccessibility of emulsion-filled double-network gel: Effect of corn fiber gum/soy protein isolate ratio and surfactant types.

Emulsion fortified with ß-carotene was added to corn fiber gum (CFG)/soy protein isolate (SPI) double network gel matrix to obtain emulsion-filled gels (EFG) via dual induction of laccase and glucono-δ-lactone. Protein digestion was accompanied by the release of ß-carotene from gel matrix during in vitro digestion. The surfactant types and corn fiber gum/soy protein isolate ratio affected the ß-carotene bioaccessibility via changing oil-water interfacial composition and emulsion particle size during in vitro digestion. As compared with Tween-20 EFGs, emulsion droplets released from SPI EFGs was more susceptible to flocculation, followed with coalescence due to proteolysis of interfacial SPI during gastric digestion. The resulting oil droplets with large particle size exhibited lower lipase adsorption, thus reducing the free fatty acid content and ß-carotene bioaccessibility. The confocal laser scanning microscope (CLSM) observation confirmed that protein hydrolysate from gel matrix were adsorbed onto the oil-water interface competing with Tween-20 during intestinal digestion. For EFGs with higher CFG content, steric hindrance of CFG molecules and less emulsion release could inhibit droplet flocculation, thus enhancing ß-carotene bioaccessibility.

Insights into the soybean protein isolate hydrolysates: Performance characterization, emulsion construction and in vitro digestive behavior.

In this experiment, the co-constructed O/W emulsions of different soy protein hydrolysates (SPHs) and gum arabic (GA) were investigated. SPHs were prepared by hydrolyzing soy protein isolate (SPI) using different enzymes, and investigated the effects of enzyme types and hydrolysis time on the physicochemical properties of SPHs. Moreover, SPI/GA and SPHs/GA were prepared and used as hydrophilic emulsifiers to construct O/W emulsions. The results showed that the optimal hydrolysis times for bromelain, pepsin and trypsin were 2 h (BSPH2), 3 h (PSPH3) and 3 h (TSPH3), respectively. Compared with SPI/GA emulsions, SPHs/GA emulsions had smaller particle size, more negative charge, higher interfacial adsorbed protein, and more stable emulsion systems. During the digestion process, SPHs/GA emulsions were effective in realizing the release of bioactives. In conclusion, enzymatic hydrolysis can be an effective modification technique, and SPHs/GA can be used as an effective emulsifier for the emulsion system.

Rapidly molded sodium alginate/soy protein adhesive hydrogel with 808-nm laser inhibition of infected wounds.

Infected wounds produce pus and heal slowly. To address this issue, we developed a rapid-setting SP/SA@BP-C hydrogel by combining sodium alginate (SA) and soy protein (SP) with black phosphorus (BP) grafted with clarithromycin (Cla) and incorporating Ca2+ for chelation. This hydrogel dressing exhibits excellent photothermal (PT) and photodynamic (PD) bacteriostatic effects without biotoxicity, making it suitable for treating infected wounds. Characterization confirmed its successful fabrication, and the bacteriostatic effect demonstrated over 99 % efficacy through the synergistic effects of PT, PD, and Cla. Cellular studies indicated nontoxicity and a promoting effect on cell proliferation (121.6 %). In the mouse-infected wound model, the hydrogel led to complete healing in 12 days, with good recovery of the skin's superficial dermal layer and appendages. Consequently, SP/SA@BP-C is a natural hydrogel dressing with promising properties.

Soy protein hydrolysates induce menaquinone-7 biosynthesis by enhancing the biofilm formation of Bacillus subtilis natto.

Menaquinone-7 (MK-7) is a form of vitamin K2 with health-beneficial effects. A novel fermentation strategy based on combining soy protein hydrolysates (SPHs) with biofilm-based fermentation was investigated to enhance menaquinone-7 (MK-7) biosynthesis by Bacillus subtilis natto. Results showed the SPHs increased MK-7 yield by 199.4% in two-stage aeration fermentation as compared to the SP-based medium in submerged fermentation, which was related to the formation of robust biofilm with wrinkles and the enhancement of cell viability. Moreover, there was a significant correlation between key genes related to MK-7 and biofilm synthesis, and the quorum sensing (QS) related genes, Spo0A and SinR, were downregulated by 0.64-fold and 0.39-fold respectively, which promoted biofilm matrix synthesis. Meanwhile, SPHs also enhanced the MK-7 precursor, isoprene side chain, supply, and MK-7 assembly efficiency. Improved fermentation performances of bacterial cells during fermentation were attributed to abundant oligopeptides (Mw < 1 kDa) and moderate amino acids, particularly Arg, Asp, and Phe in SPHs. All these results revealed that SPHs were a potential and superior nitrogen source for MK-7 production by Bacillus subtilis natto.

Protein blend extrusion: Crafting meat analogues with varied textural structures and characteristics.

With an increasing emphasis on health and environmental consciousness, there is a growing inclination toward plant protein-based meat substitutes as viable alternatives to animal meat. In the pursuit of creating diverse and functional plant protein-based substitutes, innovative plant proteins have been introduced in conjunction with soy protein isolate (SPI), encompassing pea protein isolate (PPI), rice bran protein (RBP), fava bean protein isolate (FPI), and spirulina protein isolate (SPPI). Notably, SPI-WG extrudates and SPI-PPI extrudates exhibited superior fiber structures (fiber degrees were 1.72 and 1.88, respectively), with coarse fibers in SPI-WG extrudates and fine, dense fibers in SPI-PPI extrudates. The addition of RBP, FPI and SPPI had minimal effect on fiber structure. Fresh SPI-FPI displayed the slowest rate of water loss, losing about 7.11% of their total weight in 5 h. Different plant proteins can be selected for the preparation of plant protein-based meat substitutes according to practical needs.

Constructing soybean protein isolate /bacterial cellulose co-assemblies by pH shifting treatment: Molecular conformation and physicochemical properties.

The study elucidates that the pH shifting treatment unfolds the conformation of soybean protein isolate (SPI), enabling it to intertwine with bacterial cellulose (BC) and form SPI/BC co-assemblies. Results from intrinsic fluorescence spectroscopy and surface hydrophobicity indicate that the SPI with pH shifting treatment shows a notable blue shift in maximum emission wavelength and increased surface hydrophobicity. It demonstrates that pH shifting treatment facilitates the unfolding of SPI's molecular conformation, promoting its entanglement with high aspect ratio BC. Particle size distribution and microstructural analysis further demonstrate that the pH shifting treatment facilitates the formation of SPI/BC co-assemblies. Evaluation of processing properties reveals that the SPI/BC co-assemblies exhibited exceptional gel and emulsification properties, with gel strength and emulsifying activity respectively six and two times higher than natural SPI. This enhancement is attributed to the thickening properties of BC with a high aspect ratio and the superior hydrophobicity of SPI in its molten globule state.

Co-encapsulation of vitamin E and quercetin by soybean lipophilic proteins based on pH-shifting and ultrasonication: Focus on interaction mechanisms, structural and physicochemical properties.

This study explored the mechanism of interaction of pH-shifting combined ultrasonication and its effect on soybean lipophilic proteins (SLP) and the potential of modified SLP as the carrier for vitamin E (VE) and quercetin (QU). The spectroscopy results revealed that both VE and QU changed the SLP conformation and exposed hydrophobic groups. The loading rates of VE and QU by SLP with alkaline pH-shifting combined with ultrasonication (300 w,20 min) were 86.91% and 75.99%, respectively. According to the antioxidant analysis, with an increase in the ultrasonication power, the 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azinobis-(3-ethylbenzthiazoline-6-sulphonic acid) (ABTS) radical scavenging capacity of the samples increased, where the DPPH and ABTS radical scavenging capacity of sample SQV-6 were 70.90% and 63.43%, respectively. The physicochemical properties, microstructure, and stability of the SLP-VE-QU complex improved significantly. Overall, the present findings broadened the application of simple structural carriers for co-encapsulating functional factors.

Coenzyme Q10-loaded microcapsules stabilized by glyceryl monostearate and soy protein isolates-flaxseed gum: Characterization, in vitro release and digestive behavior.

This study aimed to stabilize microcapsules with core materials of glyceryl monostearate (GMS) and octyl and decyl glycerate, and wall materials of soy protein isolates (SPI) and flaxseed gum (FG) by complex coacervation method to overcome the drawbacks of coenzyme Q10 (CoQ10). It was demonstrated by the study that the obtained microcapsules were irregular aggregates. Differential scanning calorimetry and x-ray diffraction patterns indicated that CoQ10 was entrapped inside the disordered semisolid cores of microcapsules. The CoQ10 loading and encapsulation efficiency analysis revealed that GMS and FG helped CoQ10 better encapsulated inside the microcapsules. The in vitro release curve showed a "burst" release of CoQ10 absorbed on the surface of microcapsules for the first 180 min, followed by a sustained release of the encapsulated CoQ10. GMS and FG contributed to the sustained release and the release mechanism of the microcapsules was Fickian diffusion. The in vitro simulated digestion demonstrated that the constructed microcapsules improved the bio-accessibility of CoQ10. Finally, due to the protection of GMS and FG, microcapsules had good storage stability. In conclusion, this study emphasized the potential of using new microcapsules to deliver and protect lipophilic ingredients, providing valuable information for developing functional foods with higher bioavailability.

Soy protein isolate-xanthan gum complexes to stabilize Pickering emulsions for quercetin delivery.

This study aimed to prepare soy protein isolate-xanthan gum complexes (SPI-XG) at pH 7.0 and as emulsifiers to prepare Pickering emulsions for delivering quercetin (Que). The results showed that SPI-XG exhibited a gel network structure in which protein particles were embedded. Fourier transform infrared spectroscopy (FTIR) and molecular docking elucidated that SPI-XG formed through hydrogen bonding, hydrophobic, and electrostatic interactions. Three-phase contact angle (θo/w) of SPI-XG approached 90° with biphasic wettability. SPI-XG adsorbed at the oil-water interface to form an interfacial layer with a gel network structure, which prevented droplet aggregation. Following in vitro simulated digestion, Que displayed higher bioaccessibility in SPI-XG stabilized Pickering emulsions (SPI-XG PEs) than SPI stabilized Pickering emulsions. In conclusion, SPI-XG PEs were a promising system for Que delivery.

Molecular investigation of soybean protein for improving the stability of quinoa (Chenopodium quinoa willd.) milk substitute.

Soybean could greatly improve stability of quinoa milk substitute. However, the key compound and underlying mechanisms remained unclear. Here we showed that soybean protein was the key component for improving quinoa milk substitute stability but not oil or okara. Supplementary level of soybean protein at 0%, 2%, 4%, and 8% of quinoa (w/w) was optimized. Median level at 4% could effectively enhance physical stability, reduce particle size, narrow down particle size distribution, and decrease apparent viscosity of quinoa milk substitute. Microscopic observation further confirmed that soybean protein could prevent phase separation. Besides, soybean protein showed increased surface hydrophobicity. Molecular docking simulated that soybean protein but not quinoa protein, could provide over 10 anchoring points for the most abundant quinoa vanillic acid, through hydrogen bond and Van-der-Waals. These results contribute to improve stability of quinoa based milk substitute, and provide theoretical basis for the interaction of quinoa phenolics and soybean protein.

Polyvinyl alcohol/soybean isolate protein composite pad with enhanced antioxidant and antimicrobial properties induced by novel ternary nanoparticles for fresh pork preservation.

In this study, oregano essential oil (OEO)-loaded soluble soybean polysaccharide (SSPS) -nisin nanoparticles (ONSNPs) were formulated through electrostatic attraction-driven and hydrophobic interactions utilizing SSPS, nisin, and OEO as raw materials. ONSNPs were integrated into polyvinyl alcohol (PVA) and soybean protein isolate (SPI) matrices to create composite pads (PS-ONSNPs) by physically cross-linked using a simple freeze-thaw cycling process. The effects of ONSNPs content on the structure and physicochemical properties were evaluated. The results revealed that strong intermolecular interactions between ONSNPs and the PS matrices affected the crystallinity, microstructure, and thermal stability of the pads. Upon incorporating 5 % to 15 % ONSNPs, the structure of composite pads became denser, and the mechanical properties and water resistance were enhanced. Concurrently, the PS-ONSNPs pads facilitated the protection and controlled release of OEO. Furthermore, ONSNPs significantly improved the antioxidant activity of the pads and effectively inhibited the growth of Staphylococcus aureus and Escherichia coli. The prepared PS-ONSNPs 15 % pad was applied to storage experiments of fresh pork, which could extend the shelf life of meat to 10-12 days under 4 °C storage conditions. Therefore, the composite pad devised in this research holds promise as a viable option for intelligent active packaging of fresh meat.

Preparation of soybean protein isolate-ester emulsifier oleogels and comparative study of their structure and properties.

In recent years, oleogel as a viscoelastic semi-solid to replace trans fatty acids and reduce saturated fatty acids in food has received more and more attention. Herein, an emulsion template method was used to produce soybean oil-based oleogels with seven different ester emulsifiers and soy protein isolate as oleogelators. The chemical and physical characteristics of oleogels produced via various crosslinking factors were comparatively examined. Results revealed that all oleogels generated ß-type needle crystals and exhibited high oil-holding capacity (>80 %), among which glycerol monolaurate G2 and diacetyl tartaric acid ester of mono-diglycerides G6 exhibited the strongest oil-holding capacity (96.6 % and 96.2 %, respectively). Furthermore, all oleogels exhibited strong thixotropic recovery, high thermal stability, as well as high gel strength (G' > G''). Of these, G2 and G6 exhibited the highest thixotropic recovery rates at 74.54 % and 78.19 %, respectively. Additionally, in accelerated oxidation trials, the peroxide value and thiobarbituric acid reactive substances of all oleogels had low oxidation rates, indicating high oxidative stability. These results contribute to a better understanding of oleogels for formulating trans-free and low-saturated foodstuffs with desired physical and functional properties.

Soy proteins modified using cavitation jet technology.

Soy proteins are seen as a promising alternative food source for meat with environmentally friendly properties. The problem is that the functional properties of soy proteins do not meet the needs of the food industry, and some existing modification technologies have adverse effects. Recently, cavitation jet technology (CJT) has been studied because it generates high heat, high pressure, strong shear and strong shock waves. This review summarizes the history and mechanism of cavitation jets. The energy generated during the cavitation jet process can open molecular structures, and the shock waves and microjets generated can pulverize the materials by erosion. The impact of the CJT on the morphology, structure, and functionality of soy proteins is discussed. The impact of combining CJT with other techniques on the production of soy proteins was also reviewed. The modification of proteins using two or more methods with complementary strengths, avoiding the disadvantages of certain techniques, makes the modification of proteins more effective. One of the most prominent effects is the combined treatment of cavitation jets with physical techniques. Finally, the review provides a comprehensive analysis of the application of modified soy proteins in the food industry and highlights promising avenues for future research.

Chinese consumers' valuation for prepared plant-based meat products: Does environmental information matter?

Despite the growing interest in innovative nonanimal protein-prepared foods, knowledge about consumer demand for these newly prepared foods and their potential scope in the market could be improved. This study reports the results of a discrete choice experiment on consumers' (n = 1245) willingness to pay (WTP) for prepared plant-based meat (PPBM) in the context of Chinese food culture. Consumers were randomly assigned to a treated group with additional environmental information about PPBM. The estimation results of the random parameter logit model showed that when environmental information was provided, consumer preferences and WTP for frozen meatballs with mixed meat (beef-based and soy protein-based meat) and PBM (pure soy protein-based meat) significantly increased. However, their preference and WTP for food quality and safety attributes of meatballs decreased. Simultaneously, the availability of information reveals the heterogeneity of preferences. This study found that positive WTP for PPBM was limited to consumers with a low degree of food technology neophobia (FTN) and that consumers with a high degree of FTN may avoid purchasing meatballs made from PBM. In contrast, consumers with a higher time preference (i.e., impatient consumers) were likelier to pay for PPBM meatballs. PRACTICAL APPLICATION: PPBM is especially valuable in developing innovative nonanimal protein-prepared foods, and China has the potential to become the largest PPBM food market. Understanding consumers' preference for PPBM products and the impact of information provision on their WTP will assist food companies in devising suitable strategies for the development of new PPBM products. The findings of this study provide targeted market insights for the food industry to help guide the development of plant-based meat products more effectively.

Lignin and green solvent extracted phenolic compounds from date palm leaves as functional ingredients for the formulation of soy protein isolate biocomposite packaging materials: A circular packaging concept.

The current study investigated valorization of lignin nanoparticles (LNPs) and phenolic compounds loaded in chitosan (DLECNPs) extracted from date palm leaves into the soy protein isolate (SPI) biocomposite films. The mechanical, structural, barrier, physiochemical, thermal, optical, antioxidant, and antimicrobial properties of the formulated composite films were investigated. The findings showed that the incorporation of DLECNPs into the SPI films significantly improved the film's antioxidant properties by more than 3 times and showed antibacterial inhibition zone in the range of 10-15 mm against six pathogenic bacteria. Further, incorporating LNPs into SPI-DLECNPs films notably improved the mechanical properties from 4.32 MPa and 29.27 % tensile strength and elongation at break, respectively to 10.13 MPa and 54.94 %, the water vapor permeability from 7.38 g/Pa s m to 5.59 g/Pa s m, and the antibacterial inhibition zone from a range of 10.2 mm to 15.0-21.5 mm as well as making the films more heterogeneous and stronger than control SPI film. Moreover, LNPs changed the initial films' color from light yellow to dark red and reduced the films' transparency. The results indicated that LNPs reinforced SPI composite films showed significant improvements in several properties and thus can be used as a potential ingredient for formulation of biodegradable packaging films.

Co-encapsulation of hydrophilic and hydrophobic bioactives stabilized in nanostarch-assisted emulsion for inner core gel of coaxial 3D printing.

3D printing technology, especially coaxial 3D mode of multiple-component shaping, has great potential in the manufacture of personalized nutritional foods. However, integrating and stabilizing functional objectives of different natures remains a challenge for 3D customized foods. Here, we used starch nanoparticle (SNP) to assisted soy protein (SPI) emulsion to load hydrophilic and hydrophobic bioactives (anthocyanin, AC, and curcumin, Cur). The addition of SNP significantly improved the storage stability of the emulsion. Xanthan gum (XG) was also added to the SNP/SPI system to enhance its rheology and form an emulsion gel as inner core of coaxial 3D printing. Low field nuclear magnetic resonance and emulsification analyses showed that AC/Cur@SNP/SPI/XG functional inner core had a strong water binding state and good stability. After printing with outer layer, the SNP/SPI coaxial sample had the lowest deviation rate of 0.8 %. Also, SNP/SPI coaxial sample showed higher AC (90.2 %) and Cur (90.8 %) retention compared to pure starch (S), pure SNP, pure SPI, and S/SPI samples as well as SNP/SPI sample printed without outer layer. In summary, this study provides a new perspective for the manufacture of customized products as multifunctional foods, feeds and even potential delivery of drugs.

Soy protein isolate ameliorate gel properties by regulating the non-covalent interaction between epigallocatechin-3-gallate and myofibrillar protein.

This study primarily investigated the improvement of high-dose Epigallocatechin-3-Gallate (EGCG)-induced deterioration of MP gel by soy protein isolate (SPI) addition. The results showed that EGCG could interact with MP, SPI, and HSPI (heated), indicating the competitive ability of SPI/HSPI against EGCG with MP. EGCG was encapsulated by SPI/HSPI with high encapsulation efficiency and antioxidation, with antioxidant activities of 78.5% âˆ¼ 79.2%. FTIR and molecular docking results revealed that MP, SPI, and HSPI interacted with EGCG through hydrogen bonding and hydrophobic interactions. SPI/HSPI competed with MP for EGCG, leading to the restoration of MHC and Actin bands, alleviating the aggregation caused by EGCG and oxidation. Additionally, SPI/HSPI-E significantly reduced the high cooking loss (23.71 and 26.65%) and gel strength (13.60 and 17.02%) induced by EGCG. Hence, SPI competed with MP for EGCG binding site to ameliorate MP gel properties, thereby alleviating the detrimental changes in MP caused by high-dose EGCG and oxidation.