RESUMEN
BACKGROUND: The healing process after tooth removal involves bone remodelling which implies some loss of alveolar bone volume. Among materials proposed for minimising this remodelling and preserving the bone, autologous dental tissue is a promising option, but more data are needed. In this context, we evaluated size and density changes using cone beam computed tomography in autologous dental material (ADM)-preserved sockets compared to controls, and assessed biological responses by histological analysis. METHODS: A split-mouth study was conducted including 22 patients, who underwent removal of ≥ 2 single-rooted teeth with intact sockets, assigning one socket to the experimental group which received ADM for alveolar preservation and another to the control group, which only underwent blood clot stabilisation. Cone beam computed tomography was performed postoperatively (week 0) and at weeks 8 and 16 to assess socket size and bone density. Histological analysis was carried out on trephine biopsies taken (Ø4 × 4.5 mm) from the experimental group. RESULTS: Less horizontal shrinkage was observed in the ADM group, especially at week 16 considering the group-by-time interaction for the following variables: difference in height between the lingual and buccal alveolar crests (-1.00; p < .01; 95% CI: -0.28 - -1.73), and half-widths, measured as the distance from the long axis of the missing tooth to the buccal alveolar crest at 1 mm (-0.61; p < .01; 95% CI: -0.18 - -1.04) and at 3 mm (-0.56; p < .01; 95% CI: -0.15 - -0.97) below the crest, with mean decreases of 1.07 and 2.14 mm in height difference, 0.66 and 1.32 mm in half-width at 1 mm and 0.43 and 1.02 mm in half-width at 3 mm in ADM and control groups respectively. Densitometry analysis showed higher bone densities in Hounsfield units in the ADM group considering all factors analysed regardless of time point and socket third (coronal, middle, or apical). Histologically, there were no signs of inflammation or foreign body reaction, and dentin particles were surrounded by and in close contact with bone tissue. CONCLUSION: These results add to the evidence that dentin can be used successfully as a material for alveolar socket preservation, given its desirable mechanical and biological properties, and warrant larger studies.
Asunto(s)
Tomografía Computarizada de Haz Cónico , Extracción Dental , Alveolo Dental , Humanos , Tomografía Computarizada de Haz Cónico/métodos , Alveolo Dental/cirugía , Alveolo Dental/diagnóstico por imagen , Alveolo Dental/patología , Femenino , Masculino , Persona de Mediana Edad , Adulto , Anciano , Remodelación Ósea , Densidad ÓseaRESUMEN
OBJECTIVE: To describe the clinical and radiographic performance and survival rate of a new two-piece ceramic implant system after at least 12 months of follow-up. MATERIALS AND METHODS: Sixty-five implants were placed and followed up for at least 12 months (12.3 ± 1.5), in 50 patients. The implants were installed both in fresh extraction sockets and in healed sites and received provisional restoration when the clinical insertion torque was greater than 35Ncm. The primary results describe the survival rate of these implants. Clinical performance was evaluated through the evaluation of the Pink Esthetic Score (PES) and the degree of satisfaction of the patients. Bone loss was measured through radiographic measurements of the marginal bone loss in the mesial (MBLM) and distal (MBLD) sites. RESULTS: The survival rate was 98.5%. The average MBLM was 0.24 mm (± 0.53) and the MBLD was 0.27 mm (± 0.57). A statistical difference was observed only when comparing immediate implants with delayed ones (MBLM - p = 0.046 and MBLD - p = 0.028) and when they received immediate provisionalization or not (MBLM - p = 0.009 and MBLD - p = 0.040). The PES before the intervention (T0) was 13.4 (± 0.8) and the PES at T2 (12-month follow-up) was 12.9 (± 1.5) (p = 1.14). CONCLUSION: The new two-piece ceramic implant used in the present study showed predictable and reliable results, similar to those found with titanium implants after one year of follow-up. CLINICAL RELEVANCE: These implants can be used as an alternative to titanium implants in terms of the marginal bone loss and the degree of patient satisfaction.
Asunto(s)
Cerámica , Diseño de Prótesis Dental , Humanos , Estudios Prospectivos , Masculino , Femenino , Persona de Mediana Edad , Cerámica/química , Resultado del Tratamiento , Adulto , Satisfacción del Paciente , Anciano , Estética Dental , Pérdida de Hueso Alveolar/diagnóstico por imagen , Alveolo Dental/cirugía , Alveolo Dental/diagnóstico por imagen , Fracaso de la Restauración Dental , Implantes DentalesRESUMEN
This study aimed to investigate the dimensional stability and quality of the alveolar ridge augmented using a synthetic bone block (SBB) at damaged extraction sockets. Four participants were included, and socket augmentation was performed using SBB and a collagen membrane. Intraoral and CBCT scans were performed before extraction (baseline), immediately postoperative (IP), and at 6 months postoperative (6M). At 6M, a trephine biopsy sample was obtained during implant placement, and the sample was observed using synchrotron. Soft tissue profile changes were assessed using profilometric analysis of the intraoral scan data, while dimensional changes in hard tissue were evaluated based on CBCT measurements. Bone quality was analyzed using synchrotron imaging. There were minimal changes in the soft tissue profile between baseline and IP, baseline and 6M, and IP and 6M (0.11 ± 1.08 mm3, 0.02 ± 0.8 mm3, and -0.65 ± 0.82 mm3, respectively). Horizontal bone width was measured at 1-mm increments from the augmented bone crest to 5 mm apically and revealed only a slight reduction (< 1 mm) at all levels between IP and 6M. The augmented bone height was well maintained from IP until 6M (-0.21 ± 0.53 mm). Synchrotron analysis revealed low to moderate bone quality after 6M (percentage of new bone: 16.49% ± 4.91%). Socket augmentation using SBB appears to be a viable technique for regenerating damaged extraction sockets, with the augmented ridge dimensions maintained up to 6M. Further long-term randomized clinical trials are needed.
Asunto(s)
Aumento de la Cresta Alveolar , Tomografía Computarizada de Haz Cónico , Sincrotrones , Alveolo Dental , Humanos , Alveolo Dental/cirugía , Alveolo Dental/diagnóstico por imagen , Proyectos Piloto , Aumento de la Cresta Alveolar/métodos , Persona de Mediana Edad , Masculino , Femenino , Extracción Dental , Implantación Dental Endoósea/métodos , Adulto , Sustitutos de Huesos/uso terapéutico , Anciano , Colágeno/uso terapéuticoRESUMEN
There were only a few studies investigating the effect of sagittal root position (SRP), sagittal root angle (SRA), and buccal bone thickness (BBT) on peri-implant tissues using the socket shield technique (SST). This retrospective case series aimed to evaluate the SRP, SRA, and BBT in socket shield cases and examine the effect of these anatomical factors on the peri-implant tissue phenotype and bone level. Data from 27 patients (14 women, 13 men) treated with SST in the maxillary esthetic region between July 2019 and September 2021 were included. Clinical indices (modified plaque and bleeding indices, probing depth, keratinized mucosa width, mucosal thickness) and periapical radiographic recordings (marginal bone level) taken immediately after permanent prosthesis placement and 1 year later were used. Cone beam computerized tomography images were used to examine BBT, SRP, and SRA before implant placement and horizontal and vertical bone levels before implant placement and 1 year after prosthetic rehabilitation. The data were divided into groups based on BBT (<1 and ≥1 mm) and SRA values (<10° and ≥10°). There were no significant differences in 1-year clinical factors between the SRA <10° and SRA ≥10° groups. However, higher vertical bone loss was found in the SRA ≥10° group (P = .01, d = 0.53). There were no significant differences in clinical or radiographic factors between the BBT <1 mm and BBT ≥1 mm groups. In conclusion, BBT showed no significant effect on tissue phenotype and bone level, but SRA affected bone level in socket shield cases.
Asunto(s)
Tomografía Computarizada de Haz Cónico , Fenotipo , Raíz del Diente , Alveolo Dental , Humanos , Estudios Retrospectivos , Masculino , Femenino , Alveolo Dental/cirugía , Alveolo Dental/diagnóstico por imagen , Persona de Mediana Edad , Raíz del Diente/diagnóstico por imagen , Adulto , Pérdida de Hueso Alveolar/diagnóstico por imagen , Maxilar/cirugía , Maxilar/diagnóstico por imagen , Implantación Dental Endoósea/métodos , Proceso Alveolar/diagnóstico por imagenRESUMEN
AIM: This study investigated the adjunctive effect of polydeoxyribonucleotide (PDRN) on bone formation in alveolar ridge preservation (ARP) sockets. MATERIALS AND METHODS: Both mandibular second, third and fourth premolars of eight beagle dogs were randomly divided into ARP and ARP/PDRN groups. Following tooth extraction, ARP procedures were conducted using collagenized alloplastic graft material and bilayer collagen membrane soaked with normal saline (ARP group) or PDRN (ARP/PDRN group) for 10 min before application. Both groups were also randomly allocated to 2-, 4- or 12-week healing subgroups. The primary endpoint of this study was to compare histomorphometric differences between ARP and ARP/PDRN. The secondary endpoints of this study were to compare micro-CT analysis and three-dimensional volumetric measurement between the two groups. RESULTS: In the histomorphometric analysis, the ARP/PDRN group exhibited greater new bone formation at coronal, middle and total position compared with the ARP group at 2-week healing. The number of newly formed blood vessels was higher in the ARP/PDRN group than in the ARP group at 2- and 4-week healing. In micro-CT analysis, the mean new bone volume/total bone volume between ARP and ARP/PDRN was statistically significant at 2-week healing. Ridge volume alterations were significantly decreased in the ARP/PDRN group during entire healing time compared with the ARP group, especially on the buccal side. CONCLUSIONS: The application of PDRN in ARP might provide additional benefits for early bone regeneration and maintenance of buccal ridge volume.
Asunto(s)
Polidesoxirribonucleótidos , Extracción Dental , Alveolo Dental , Microtomografía por Rayos X , Animales , Perros , Polidesoxirribonucleótidos/farmacología , Polidesoxirribonucleótidos/uso terapéutico , Alveolo Dental/efectos de los fármacos , Alveolo Dental/diagnóstico por imagen , Alveolo Dental/cirugía , Distribución Aleatoria , Proceso Alveolar/efectos de los fármacos , Proceso Alveolar/diagnóstico por imagen , Osteogénesis/efectos de los fármacos , Regeneración Ósea/efectos de los fármacos , Sustitutos de Huesos/farmacología , Sustitutos de Huesos/uso terapéutico , Masculino , Cicatrización de Heridas/efectos de los fármacos , Colágeno/farmacología , Imagenología Tridimensional/métodos , Membranas Artificiales , Mandíbula/cirugía , Mandíbula/diagnóstico por imagen , Mandíbula/efectos de los fármacosRESUMEN
OBJECTIVE: Pigs are emerging as a preferred experimental in vivo model for bone regeneration. The study objective was to answer the focused PEO question: in the pig model (P), what is the capacity of experimental alveolar bone defects (E) for spontaneous regeneration in terms of new bone formation (O)? METHODS: Following PRISMA guidelines, electronic databases were searched for studies reporting experimental bone defects or extraction socket healing in the maxillae or mandibles of pigs. The main inclusion criteria were the presence of a control group of untreated defects/sockets and the assessment of regeneration via 3D tomography [radiographic defect fill (RDF)] or 2D histomorphometry [new bone formation (NBF)]. Random effects meta-analyses were performed for the outcomes RDF and NBF. RESULTS: Overall, 45 studies were included reporting on alveolar bone defects or extraction sockets, most frequently in the mandibles of minipigs. Based on morphology, defects were broadly classified as 'box-defects' (BD) or 'cylinder-defects' (CD) with a wide range of healing times (10 days to 52 weeks). Meta-analyses revealed pooled estimates (with 95% confidence intervals) of 50% RDF (36.87%-63.15%) and 43.74% NBF (30.47%-57%) in BD, and 44% RDF (16.48%-71.61%) and 39.67% NBF (31.53%-47.81%) in CD, which were similar to estimates of socket-healing [48.74% RDF (40.35%-57.13%) and 38.73% NBF (28.57%-48.89%)]. Heterogeneity in the meta-analysis was high (I2 > 90%). CONCLUSION: A substantial body of literature revealed a high capacity for spontaneous regeneration in experimental alveolar bone defects of (mini)pigs, which should be considered in future studies of bone regeneration in this animal model.
Asunto(s)
Pérdida de Hueso Alveolar , Regeneración Ósea , Modelos Animales de Enfermedad , Animales , Pérdida de Hueso Alveolar/diagnóstico por imagen , Pérdida de Hueso Alveolar/patología , Porcinos , Alveolo Dental/patología , Alveolo Dental/diagnóstico por imagen , Cicatrización de Heridas/fisiologíaRESUMEN
Previous findings indicated that the laser photobiomodulation is more effective than the control or placebo in preserving the alveolar socket. This study aimed to compare two different lasers regarding their effectiveness in aiding alveolar socket preservation. Twenty extraction sockets were selected then divided into two equal groups. Group A was exposed to 650 nm Diode laser, and Group B to 810 nm Diode laser following the same protocol and parameters after a standard alveolar socket preservation procedure with collagen plug. Radiographic analysis with cone beam computed tomography was done to compare the alveolar bone surface area immediately after extraction and three months post-operatively, while bone samples collected before implant drilling were histologically examined for newly formed bone evaluation and histomorphometric analysis in terms of percentage of new bone surface area, percentage of unmineralized bone and finally, immunohistochemical analysis of Osteocalcin reaction surface area as well as optical density. Radiographically, infrared (810 nm) Diode effect on alveolar bone surface area has significantly exceeded the red laser, while histologically, red (650 nm) Diode has demonstrated statistical significance regarding all parameters; newly formed bone surface area percentage, unmineralized bone area percentage and finally Osteocalcin bone marker reaction surface area percentage and optical density. Under the specified conditions and laser parameters, photobiomodulation using the 810 nm Diode got the upper hand radiographically, yet histologically, the red 650 nm Diode managed to dominate all histological parameters when both employed as an adjunct to alveolar socket preservation procedures.
Asunto(s)
Pérdida de Hueso Alveolar , Terapia por Luz de Baja Intensidad , Humanos , Proceso Alveolar/diagnóstico por imagen , Proceso Alveolar/cirugía , Proceso Alveolar/patología , Alveolo Dental/diagnóstico por imagen , Alveolo Dental/cirugía , Alveolo Dental/patología , Láseres de Semiconductores/uso terapéutico , Osteocalcina , Extracción Dental/métodos , Pérdida de Hueso Alveolar/patologíaRESUMEN
This prospective study investigated clinically and radiologically the effectiveness of the use of a combined hard and soft tissue graft retrieved from the maxillary tuberosity and designed for alveolar ridge preservation following tooth extraction. Seven patients scheduled for a single mono-rooted tooth extraction were included in the study. After atraumatic extraction, sockets were filled with a "one-piece" dual tissue graft harvested from the tuberosity using an adjusted trephine. CBCTs were performed before the extraction and 4 months after ridge preservation, to analyze the vertical and horizontal alterations of the ridge, using ITK-Snap software. Clinical measurements of both soft and hard tissues were also assessed during the extraction and implant placement. All sites healed uneventfully. After 4 months, the 3D super-imposition of both CBCTs showed a mean bone volume resorption of 65 ± 76.7 mm3 (10.2 ± 10%). The mean horizontal reduction at 2, 4, and 6 mm from the top of the crest was respectively 1.5 ± 1.3 mm, 0.47 ± 1.4 mm and 0.57 ± 0.7 mm, while the mean vertical loss was 0.026 mm ± 2 mm. The mean soft tissue horizontal gain was 1.73 ± 1.12 mm. The "one-piece" autologous tuberosity graft was proven to be a safe and effective alveolar ridge preservation technique and may represent a feasible, user-friendly, time saving, low-cost solution for minimizing dimensional loss following tooth extraction.
Asunto(s)
Proceso Alveolar , Resorción Ósea , Humanos , Alveolo Dental/diagnóstico por imagen , Alveolo Dental/cirugía , Proyectos Piloto , Estudios Prospectivos , Resorción Ósea/patología , Extracción Dental/efectos adversosRESUMEN
The two presented cases of socket shield technique were done following a split mouth protocol in two patients, each received an immediate implant inserted conventionally on maxillary one side and another implant inserted applying the socket shield technique on the contralateral side. The outcomes including soft and hard tissue changes were compared clinically and radiographically. The four implants were followed for 5 years, and the outcomes were successful.
Asunto(s)
Implantes Dentales , Carga Inmediata del Implante Dental , Humanos , Estudios de Seguimiento , Alveolo Dental/diagnóstico por imagen , Alveolo Dental/cirugía , Carga Inmediata del Implante Dental/métodos , Estética Dental , Boca , Extracción Dental/métodos , Resultado del TratamientoRESUMEN
AIM: To explore the features of and potential landmarks that predict crestal ridge remodeling after immediate implant placement and provisionalization (IIPP) with thin buccal plate phenotype in the anterior maxilla. MATERIALS AND METHODS: Patients requiring IIPP of single maxillary incisor with thin buccal bone plate (<1 mm) were recruited. Cone-beam computed tomography (CBCT), performed before and 6 months after the intervention, were three-dimensionally superimposed. A virtual line connecting the bony emergence points of adjacent teeth was drawn as a reference. The facial-coronal alveolar crest of the extraction socket and healed ridge were located in mesial, middle and distal cross-sectional planes, and linear ridge reductions were measured. The correlation between ridge reduction and local factors was analyzed. RESULTS: Fifty patients were included. From the extraction socket to healed ridge, the alveolar crest underwent linear bone reduction of 1.50 ± 0.50, 1.54 ± 0.66 and 1.65 ± 0.73 mm in the mesial, middle, and distal regions in an apical-palatal direction. The middle region had significantly higher horizontal (facial-palatal) but lower vertical (coronal-apical) bone reduction than the mesial and distal areas (P < 0.01). The facial-coronal ridge crest of the healed ridge located close to the reference line. Ridge reduction positively correlated with the distance between the initial facial-coronal crest of the extraction socket and the reference line (P < 0.01). CONCLUSIONS: Alveolar crest of the socket lost its curvature and tended to attain a flat profile after IIPP due to inconsistent ridge reduction in middle, mesial and distal areas. The reference line may be a potential landmark for predicting the ridge crest after remodeling.
Asunto(s)
Pérdida de Hueso Alveolar , Implantes Dentales , Humanos , Maxilar/diagnóstico por imagen , Maxilar/cirugía , Placas Óseas , Estudios Transversales , Proceso Alveolar/diagnóstico por imagen , Proceso Alveolar/cirugía , Tomografía Computarizada de Haz Cónico/métodos , Extracción Dental , Alveolo Dental/diagnóstico por imagen , Alveolo Dental/cirugía , Pérdida de Hueso Alveolar/diagnóstico por imagen , Pérdida de Hueso Alveolar/etiologíaRESUMEN
Extraction-site alveolar remodeling is a major concern due to negative volumetric hard and soft tissue changes that inevitably limit rehabilitation options and diminish esthetic outcomes. Surgical techniques employed to minimize alveolar dimensional changes are not always predictable. Utilizing a socket shield with an immediate surgical implant procedure helps maintain a thin portion of the root in the vestibular area and thus minimizes bone resorption, especially at the coronal cortical aspect. This case series assesses the dimensional changes in peri-alveolar structures via superimposition of the preoperative and 6-month postoperative 3D digital quantification of soft tissue. Fifty patients with 50 sites fulfilled the inclusion criteria. Implant survival was 100%, with no incidence of complications. Tissue changes were as follows: -0.85 mm at the mesial papilla, -0.95 mm at the distal papilla, -0.7 mm at both the vertical and horizontal central margins, -0.21 mm at a distance 4 mm from the margin, and -0.64 mm at the palatal central margin. The buccal contour was clinically convex in all cases. The site with highest frequency of > 1 mm of dimensional loss was the distal papilla (42% of sites), and the site with the lowest frequency was the point 4 mm from the midfacial margin (0% of sites).
Asunto(s)
Implantes Dentales de Diente Único , Implantes Dentales , Carga Inmediata del Implante Dental , Humanos , Carga Inmediata del Implante Dental/métodos , Alveolo Dental/diagnóstico por imagen , Alveolo Dental/cirugía , Implantación Dental Endoósea/métodos , Extracción Dental/métodosRESUMEN
OBJECTIVES: The aim of the present study was to evaluate clinical and radiographic outcomes of implants placed in alveolar sockets treated by means of alveolar ridge preservation after 10 years of follow-up. METHOD AND MATERIALS: Eleven patients treated with 11 implants placed after alveolar ridge preservation using bovine-derived xenograft particles and collagen membrane were selected. Full-mouth plaque score, full-mouth bleeding score, probing depth at four sites per implant, and radiographic marginal bone level at mesial and distal aspects for each implant were recorded at baseline and after 10 years of follow-up. The primary outcome was the radiographic marginal bone loss. The marginal bone loss was considered as the difference between marginal bone level at baseline and after 10 years of observation time. RESULTS: After 10 years of follow-up, full-mouth plaque score increased significantly (P < .05), while no statistically significant differences were found in the change in full-mouth bleeding score (P ≥ .05). At the 10-year observation period, a significant increase in probing depth was observed at all sites (P < .05), except at the mesial aspects (P ≥ .05). Radiographic marginal bone loss was 1.1 ± 0.1 mm and 1.0 ± 0.1 mm at mesial and distal sites, respectively. CONCLUSION: Whitin the limitations of the present study, implants placed in post-extraction sockets treated with alveolar ridge preservation yielded stable clinical and radiographic results after 10 years of follow-up.
Asunto(s)
Pérdida de Hueso Alveolar , Implantes Dentales , Humanos , Animales , Bovinos , Estudios Retrospectivos , Estudios de Seguimiento , Implantación Dental Endoósea/métodos , Alveolo Dental/diagnóstico por imagen , Alveolo Dental/cirugía , Pérdida de Hueso Alveolar/diagnóstico por imagen , Pérdida de Hueso Alveolar/prevención & control , Resultado del Tratamiento , Extracción Dental/efectos adversosRESUMEN
OBJECTIVES: To assess both the radiographic and profilometric outcomes of early implant placement with or without alveolar ridge preservation (ARP) (using two different ARP techniques) after 1 year of loading. MATERIALS AND METHODS: Seventy-five patients with a failing single tooth in the anterior maxilla were randomly allocated to three groups (1:1:1): (a) ARP using demineralized bovine bone mineral containing 10% collagen (DBBM-C) covered by a collagen matrix (CM), (b) ARP using DBBM-C covered with a palatal graft (PG), and (c) unassisted socket healing (control). Eight weeks after tooth extraction, early implant placement was performed in all patients. Cone-beam computed tomography (CBCT) and impressions were taken 8 weeks after tooth extraction (ARP/unassisted healing) prior to implant placement and 1-year post-loading. Radiographic and profilometric outcomes were evaluated. RESULTS: Out of the 70 patients available for re-examination at 1-year post-loading, 55 datasets could be assessed (ARP-CM 19; ARP-PG 17; Control 19). The need for additional guided bone regeneration (GBR) at implant placement amounted to 31.6% (ARP-CM), 29.4% (ARP-PG), and 68.4% (unassisted healing). Adjusted models revealed that residual buccal bone height and additional GBR at implant placement significantly influenced the magnitude of the alveolar changes at 1 year (p < 0.05). In patients with ARP (group ARP-CM or ARP-PG) without additional GBR, the presence of bone convexity amounted to 36.0% (9/25) at 1-year post-loading. For patients that received ARP and additional GBR at implant placement, the frequency of bone convexity increased to 72.7% (8/11) (p = 0.042). Regarding profilometric measurements, a tendency toward agreement with radiographic outcomes was observed. CONCLUSIONS: Early implant placement with ARP can attenuate alveolar ridge changes at 1-year post loading by minimizing both radiographic and profilometric alterations. However, early implant placement with simultaneous GBR consistently yields superior radiographic and profilometric outcomes, regardless of whether ARP is performed.
Asunto(s)
Pérdida de Hueso Alveolar , Aumento de la Cresta Alveolar , Implantes Dentales , Minerales , Humanos , Animales , Bovinos , Aumento de la Cresta Alveolar/métodos , Alveolo Dental/diagnóstico por imagen , Alveolo Dental/cirugía , Estética Dental , Proceso Alveolar/diagnóstico por imagen , Proceso Alveolar/cirugía , Colágeno , Extracción Dental , Pérdida de Hueso Alveolar/diagnóstico por imagen , Pérdida de Hueso Alveolar/prevención & control , Productos BiológicosRESUMEN
The aim of this study was to evaluate the impact of mini-screw placement on the alveolar ridge using a split-mouth design. Twelve beagles underwent bilateral extraction of their lateral teeth. In the immediate group, a mini-screw was unilaterally placed approximately 3-4 mm below the alveolar crest of the extraction site on the experimental side. The delayed group received mini-screws six weeks after tooth extraction. On average, the dogs were sacrificed after 11 weeks, and the maxillary bones were excised and scanned using cone-beam computed tomography (CBCT). Histopathological examinations were conducted to assess inflammation and bone formation scores. The results showed that in the immediate group, bone height was significantly greater on the intervention side compared to the control side (p < 0.05), whereas there was no significant difference in the delayed group. In both groups, there was a significant increase in bone density around the mini-screws compared to the control sides (p < 0.05). Mini-screw insertion led to a significant enhancement of bone growth in both groups (p < 0.05), with no notable differences between the two groups. The mini-screws did not have any impact on bone inflammation or width. Overall, both immediate and delayed mini-screw placement in the extraction socket positively influenced bone dimensions, density, and histological properties. However, immediate insertion was more effective than delayed placement in preserving vertical bone height, despite delayed insertion resulting in higher bone density.
Asunto(s)
Pérdida de Hueso Alveolar , Alveolo Dental , Perros , Animales , Alveolo Dental/diagnóstico por imagen , Alveolo Dental/cirugía , Pérdida de Hueso Alveolar/diagnóstico por imagen , Pérdida de Hueso Alveolar/etiología , Pérdida de Hueso Alveolar/patología , Densidad Ósea , Proceso Alveolar/diagnóstico por imagen , Proceso Alveolar/cirugía , Proceso Alveolar/patología , Extracción Dental/efectos adversos , Extracción Dental/métodos , Tornillos Óseos , Tomografía Computarizada de Haz Cónico/métodosRESUMEN
BACKGROUND: Atelocollagen (AC) is a low-immunogenic collagen derivative with longer degradation time, which can be a suitable material for alveolar ridge preservation (ARP). However, there are few human studies on AC using for ARP. This research aims to radiographically evaluate the efficacy of AC in comparison to deproteinized bovine bone minerals covered with a collagen membrane (DBBM/CM) in ARP. METHODS: Medical records in the Implantology Department of the Hospital of Stomatology of Wuhan University were screened for patients who received flapless ARP using either AC or DBBM/CM. A total of 58 patients were included in this retrospective study. 28 patients were treated with AC, while 30 patients were used DBBM/CM. Cone-beam computed tomography (CBCT) scans were taken before extraction and after 6 months of healing. To assess the dimensional change of the extraction sockets, the scanning data were output and transferred to the digital software to measure horizontal bone width change, vertical bone height change and bone volume change in region of interest. To evaluate the bone quality of healed sockets, the bone density of virtual implants was evaluated. RESULTS: The horizontal bone width changes at all five different levels showed no significant difference between the two groups. The largest horizontal bone width decrement in both groups occurred at the crest of ridge, which decreased 3.71 ± 1.67 mm in AC group and 3.53 ± 1.51 mm in DBBM/CM group (p = 0.68). At the central buccal aspect, the ridge height reduced 0.10 ± 1.30 mm in AC group, while increased 0.77 ± 2.43 mm in DBBM/CM group (p = 0.10). The vertical bone height differences between two groups showed no statistical significance. The percentages of volume absorption in AC group and DBBM/CM group were 12.37%±6.09% and 14.54%±11.21%, respectively. No significant difference in volume absorption was found (p = 0.36). The average bone density around virtual implants in AC group (649.41 ± 184.71 HU) was significantly lower than that in DBBM/CM group (985.23 ± 207.85 HU) (p < 0.001). CONCLUSIONS: ARP with AC had a similar effect on limiting the dimensional alteration of alveolar ridge, when radiographically compared with DBBM/CM.
Asunto(s)
Pérdida de Hueso Alveolar , Aumento de la Cresta Alveolar , Humanos , Animales , Bovinos , Pérdida de Hueso Alveolar/etiología , Alveolo Dental/diagnóstico por imagen , Alveolo Dental/cirugía , Estudios Retrospectivos , Proceso Alveolar/diagnóstico por imagen , Colágeno/uso terapéutico , Minerales , Aumento de la Cresta Alveolar/métodos , Extracción Dental/efectos adversosRESUMEN
BACKGROUND: An alveolar ridge preservation (ARP) procedure is commonly performed to preserve ridge width and height for optimal dental implant placement. Mixing different sources of bone grafts may help maximize their properties to obtain predictable ARP results. OBJECTIVE: The aim of this case series is to highlight the clinical and radiographic outcomes of a combined allograft and xenograft approach for a predictable ARP procedure. MATERIALS AND METHODS: Eleven clinical cases that required tooth extraction and future implant placement were selected for this case series. All surgeries were performed by a single clinician in a private practice setting. All cases underwent an ARP procedure, which included atraumatic extraction, degranulation, assessment of the socket, and the use of a combination of allograft and xenograft fibers/granules in a 1:1 mixing approach. Based on the socket defect, either a type I or type III collagen membrane was used during the procedure. In all cases CBCT imaging was done prior to surgical implant placement, and digital implant planning was performed integrating interdisciplinary best practices. Implant placement was carried out using manufacturer's recommendations. RESULTS: Five male and five female patients were included in the study, with one of the male patients having two teeth extracted for a total of 11 cases. The reasons for teeth extraction included fracture, endodontic failure, periodontal infection, and subgingival decay. Healing was uneventful after the ARP procedure for all patients. A minimum of 120 days elapsed between ARP and the surgical implant procedure. Complete radiographic bone fill was observed in the CBCT image for all extraction sites, and no additional bone augmentation was needed at the time of implant placement. CONCLUSION: This case series demonstrates that based on clinical and radiographic outcomes, a combination of allogenic and xenogenic bone substitute can be utilized to obtain predictable results following ARP. Future randomized controlled trials that can compare different ratios between the two biomaterials are indicated to guide clinicians in the mixing protocols and their outcomes.
Asunto(s)
Pérdida de Hueso Alveolar , Aumento de la Cresta Alveolar , Humanos , Femenino , Masculino , Proceso Alveolar/cirugía , Alveolo Dental/diagnóstico por imagen , Alveolo Dental/cirugía , Xenoinjertos , Materiales Biocompatibles , Extracción Dental , Aumento de la Cresta Alveolar/métodos , Aloinjertos/cirugía , Pérdida de Hueso Alveolar/cirugíaRESUMEN
The objective of this randomized clinical trial (RCT) was to assess the effectiveness of electrospun chitosan/polyvinyl alcohol (CS/PVA) nanofibrous scaffolds in preserving the alveolar ridge and enhancing bone remodeling following tooth extraction when compared to a control group. In this split RCT, 24 human alveolar sockets were randomly assigned to two groups, with 12 sockets receiving CS/PVA nanofibrous scaffold grafts (test group) and 12 left to heal by secondary intention as the control group. Cone-beam computed tomography (CBCT) was performed at two different time points: immediately after extraction (T0) and 4 months post-extraction (T4). After 4 months, linear vertical and horizontal radiographic changes and bone density of extraction sockets were assessed in both the test and control groups. The RCT included 12 patients (4 male and 8 female) with a mean age of 24 ± 3.37 years. The test group had a significantly lower mean vertical resorption vs the control group, with a mean difference of 1.1 mm (P < 0.05). Similarly, the control group's mean horizontal bone resorption was -2.01 ± 1.04 mm, while the test group had a significantly lower mean of -0.69 ± 0.41 mm, resulting in a mean difference of 1.35 mm (P < 0.05). Furthermore, the study group exhibited a significant increase in bone density (722.03 ± 131.17 HU) after 4 months compared to the control group (448.73 ± 93.23 HU). In conclusion, we demonstrated within the limitations of this study that CS/PVA nanofibrous scaffold significantly limited alveolar bone resorption horizontally and vertically and enhanced bone density in alveolar sockets after 4 months when compared to results in the control group (TCTR20230526005).
Asunto(s)
Pérdida de Hueso Alveolar , Aumento de la Cresta Alveolar , Quitosano , Nanofibras , Masculino , Femenino , Humanos , Adulto Joven , Adulto , Alcohol Polivinílico/uso terapéutico , Alveolo Dental/diagnóstico por imagen , Alveolo Dental/cirugía , Aumento de la Cresta Alveolar/métodos , Nanofibras/uso terapéutico , Proceso Alveolar/diagnóstico por imagen , Proceso Alveolar/cirugía , Pérdida de Hueso Alveolar/diagnóstico por imagen , Pérdida de Hueso Alveolar/prevención & control , Pérdida de Hueso Alveolar/cirugía , Extracción DentalRESUMEN
OBJECTIVES: Alveolar ridge preservation (ARP) has been extensively investigated in various preclinical and clinical studies, yielding favorable results. We aim to evaluate the effects of ARP using collagenated bovine bone mineral (CBBM) alone or particulated bovine bone mineral with a non-cross-linked collagen membrane (PBBM/NCLM) in tooth extraction sockets with buccal dehiscence in an experimental dog model. MATERIALS AND METHODS: The mesial roots of three mandibular premolars (P2, P3, and P4) were extracted from six mongrel dogs 4 weeks after inducing dehiscence defects. ARP was randomly performed using two different protocols: 1) CBBM alone and 2) PBBM/NCLM. Three-dimensional (3D) volumetric, micro-computed tomography, and histological analyses were employed to determine changes over a span of 20 weeks. RESULTS: In 3D volumetric and radiographic analyses, CBBM alone demonstrated similar effectiveness to PBBM/NCLM in ARP (p > .05). However, in the PBBM/NCLM group (3.05 ± 0.60 mm), the horizontal ridge width was well maintained 3 mm below the alveolar crest compared with the CBBM group (2.11 ± 1.01 mm, p = .002). CONCLUSION: Although the radiographic changes in the quality and quantity of bone were not significant between the two groups, the use of PBBM/NCLM resulted in greater horizontal dimensions and more favorable maintenance of the ridge profile.
Asunto(s)
Aumento de la Cresta Alveolar , Perros , Animales , Bovinos , Microtomografía por Rayos X , Aumento de la Cresta Alveolar/métodos , Proceso Alveolar/diagnóstico por imagen , Proceso Alveolar/cirugía , Proceso Alveolar/patología , Alveolo Dental/diagnóstico por imagen , Alveolo Dental/cirugía , Alveolo Dental/patología , Colágeno , Minerales/farmacología , Minerales/uso terapéuticoRESUMEN
PURPOSE: Alveolar ridge preservation (ARP) was introduced to minimize postextraction alveolar bone loss and extraction socket remodeling; however, current knowledge of the ARP procedure for nonintact extraction sockets is still limited and inconclusive. This retrospective study aimed to evaluate the difference between using deproteinized bovine bone mineral with 10% collagen (DBBM-C) and deproteinized porcine bone mineral with 10% collagen (DPBM-C) when performing ARP procedures in damaged or periodontally compromised extraction sockets based on clinical, radiographic, and profilometric outcomes. METHODS: In total, 108 extraction sockets were grafted with 67 DBBM-C and 41 DPBM-C. Changes in radiographic (horizontal width and vertical height) and profilometric outcomes were measured after the ARP procedure and before the implant surgery. Postoperative discomfort (including the severity and duration of pain and swelling), early wound healing outcomes (including spontaneous bleeding and persistent swelling), implant stability, and treatment modalities for implant placement were also assessed. RESULTS: Radiographically, the DBBM-C group decreased by -1.70 ± 2.26 mm (-21.50%) and - 1.39 ± 1.85 mm (-30.47%) horizontally and vertically, and the corresponding DPBM-C group decreased by -1.66 ± 1.80 mm (-20.82%) and -1.44 ± 1.97 mm (-27.89%) horizontally and vertically at an average of 5.6 months. There were no serious or adverse complications in any of the cases, and none of the measured parameters differed significantly between the groups. CONCLUSION: Within the limitations of this study, ARP with DBBM-C and DPBM-C showed similar clinical, radiographic, and profilometric outcomes in nonintact extraction sockets.
Asunto(s)
Pérdida de Hueso Alveolar , Aumento de la Cresta Alveolar , Sustitutos de Huesos , Animales , Bovinos , Porcinos , Sustitutos de Huesos/uso terapéutico , Estudios Retrospectivos , Alveolo Dental/diagnóstico por imagen , Alveolo Dental/cirugía , Aumento de la Cresta Alveolar/métodos , Estudios de Casos y Controles , Extracción Dental/efectos adversos , Pérdida de Hueso Alveolar/diagnóstico por imagen , Pérdida de Hueso Alveolar/etiología , Pérdida de Hueso Alveolar/prevención & control , Colágeno/uso terapéutico , Minerales/uso terapéuticoRESUMEN
OBJECTIVES: To analyze the effect of biological sex and aging on craniofacial bone features in 129 Sv mice and their influence on dental socket healing post tooth extraction. MATERIALS AND METHODS: A total of 52 129 Sv mice were used, of which 28 were young (3-4 months) and 24 were aged (17-18 months), equally distributed according to biological sex. After an upper right incisor extraction, mice specimens were collected at 7, 14, and 21-days post-surgery for microtomographic (microCT) and comprehensive histological analysis. Mandible, skull bones, and maxillae at 21 days were analyzed by microCT, while blood plasma samples were collected for the detection of key bone turnover markers (P1NP and CTX-1) by enzyme-linked immunosorbent (ELISA) assay. RESULTS: Aged females depicted significantly decreased mineralized bone content in alveolar sockets in comparison to young females and aged males at day 7, and aged males at day 14. Mandible RCA and Ma.AR of aged females were also significantly decreased in comparison with young females. Histological evaluation revealed that all alveolar sockets healed at 21 days with inflammation resolution and deposition of new bone. Immunohistochemistry for TRAP revealed increased area density for osteoclasts in alveolar sockets of aged females when compared to young females at 21 days. While a significant increase in CTX-1 levels was detected in blood plasma of aged females when compared to young females, P1NP levels did not significantly change between young and older females. No significant changes were observed for males. CONCLUSIONS: Age and gender can significantly affect craniofacial bones of 129 Sv mice, especially maxilla and mandible in females. Considering the altered bone resorption parameters and delayed alveolar bone healing in older females, careful deliberation is necessary during development of pre-clinical models for craniofacial research. CLINICAL RELEVANCE: Aging can be a contributing factor to slower bone healing in craniofacial bones. However, there are no sufficient experimental studies that have addressed this phenomenon along with biological sex taken into consideration.