Simplification of continuous intracoronary thermodilution.

BACKGROUND: Continuous intracoronary thermodilution with saline allows for the accurate measurement of volumetric blood flow (Q) and absolute microvascular resistance (Rµ). However, this requires repositioning of the temperature sensor by the operator to measure the entry temperature of the saline infusate, denoted as Ti. AIMS: We evaluated whether Ti could be predicted based on known parameters without compromising the accuracy of calculated Q. This would significantly simplify the technique and render it completely operator independent. METHODS: In a derivation cohort of 371 patients with Q measured both at rest and during hyperaemia, multivariate linear regression was used to derive an equation for the prediction of Ti. Agreement between standard Q (calculated with measured Ti) and simplified Q (calculated with predicted Ti) was assessed in a validation cohort of 120 patients that underwent repeat Q measurements. The accuracy of simplified Q was assessed in a second validation cohort of 23 patients with [15O]H2O positron emission tomography (PET)-derived Q measurements. RESULTS: Simplified Q exhibited strong agreement with standard Q (r=0.94, confidence interval [CI]: 0.93-0.95; intraclass correlation coefficient [ICC] 0.94, CI: 0.92-0.95; both p<0.001). Simplified Q exhibited excellent agreement with PET-derived Q (r=0.86, CI: 0.75-0.92; ICC=0.84, CI: 0.72-0.91; both p<0.001). Compared with standard Q, there were no statistically significant differences between correlation coefficients (p=0.29) or standard deviations of absolute differences with PET-derived Q (p=0.85). CONCLUSIONS: Predicting Ti resulted in an excellent agreement with measured Ti for the assessment of coronary blood flow. It significantly simplifies continuous intracoronary thermodilution and renders absolute coronary flow measurements completely operator independent.

Absolute coronary flow and microvascular resistance before and after transcatheter aortic valve implantation.

BACKGROUND: Severe aortic stenosis (AS) is associated with left ventricular (LV) remodelling, likely causing alterations in coronary blood flow and microvascular resistance. AIMS: We aimed to evaluate changes in absolute coronary flow and microvascular resistance in patients with AS undergoing transcatheter aortic valve implantation (TAVI). METHODS: Consecutive patients with AS undergoing TAVI with non-obstructive coronary artery disease in the left anterior descending artery (LAD) were included. Absolute coronary flow (Q) and microvascular resistance (Rµ) were measured in the LAD using continuous intracoronary thermodilution at rest and during hyperaemia before and after TAVI, and at 6-month follow-up. Total myocardial mass and LAD-specific mass were quantified by echocardiography and cardiac computed tomography. Regional myocardial perfusion (QN) was calculated by dividing absolute flow by the subtended myocardial mass. RESULTS: In 51 patients, Q and R were measured at rest and during hyperaemia before and after TAVI; in 20 (39%) patients, measurements were also obtained 6 months after TAVI. No changes occurred in resting and hyperaemic flow and resistance before and after TAVI nor after 6 months. However, at 6-month follow-up, a notable reverse LV remodelling resulted in a significant increase in hyperaemic perfusion (QN,hyper: 0.86 [interquartile range {IQR} 0.691.06] vs 1.20 [IQR 0.99-1.32] mL/min/g; p=0.008; pre-TAVI and follow-up, respectively) but not in resting perfusion (QN,rest: 0.34 [IQR 0.30-0.48] vs 0.47 [IQR 0.36-0.67] mL/min/g; p=0.06). CONCLUSIONS: Immediately after TAVI, no changes occurred in absolute coronary flow or coronary flow reserve. Over time, the remodelling of the left ventricle is associated with increased hyperaemic perfusion.

The role of advanced physiological guidance in contemporary coronary artery disease management.

PURPOSE OF REVIEW: This review evaluates the emerging role of the pullback pressure gradient (PPG) as a standardized metric for assessing coronary artery disease (CAD) patterns and its implications for clinical decision-making when managing patients undergoing percutaneous coronary interventions (PCIs). By integrating PPG with existing physiological assessments, this review highlights the potential benefits of PPG in predicting treatment outcomes and refining therapeutic strategies for CAD. RECENT FINDINGS: Recent studies, particularly the PPG Global study have demonstrated a strong correlation between PPG values and post-PCI outcomes, revealing that focal disease is associated with improved fractional flow reserve (FFR) and lower rates of adverse events than vessels with diffuse disease (low PPG). Additionally, PPG has been linked to specific atherosclerotic plaque characteristics, indicating its utility in identifying high-risk plaques. The integration of PPG with advanced imaging techniques further enhances the understanding of CAD patterns and their implications for treatment planning. SUMMARY: The PPG represents a significant advancement in the management of CAD, providing a reproducible and objective assessment of coronary artery disease patterns that can inform clinical decision-making. As research continues to explore the relationship among PPG, atherosclerotic characteristics, and patient outcomes, its integration into routine practice is expected to improve the effectiveness of PCI and optimize patient management strategies. Future studies are warranted to establish specific PPG thresholds and further investigate its potential in identifying vulnerable plaques and guiding treatment decisions.

Vascular Remodeling in Coronary Microvascular Dysfunction.

BACKGROUND: Approximately half of the patients with angina and nonobstructive coronary artery disease (ANOCA) have evidence of coronary microvascular dysfunction (CMD). OBJECTIVES: This study aims to characterize patients with ANOCA by measuring their minimal microvascular resistance and to examine the pattern of vascular remodeling associated with these measurements. METHODS: The authors prospectively included patients with ANOCA undergoing continuous thermodilution assessment. Lumen volume and vessel-specific myocardial mass were quantified using coronary computed tomography angiography (CTA). CMD was defined as coronary flow reserve <2.5 and high minimal microvascular resistance as >470 WU. RESULTS: A total of 153 patients were evaluated; 68 had CMD, and 22 of them showed high microvascular resistance. In patients with CMD, coronary flow reserve was 1.9 ± 0.38 vs 3.2 ± 0.81 in controls (P < 0.001). Lumen volume was significantly correlated with minimal microvascular resistance (r = -0.59 [95% CI: -0.45 to -0.71]; P < 0.001). In patients with CMD and high microvascular resistance, lumen volume was 40% smaller than in controls (512.8 ± 130.3 mm3 vs 853.2 ± 341.2 mm3; P < 0.001). Epicardial lumen volume assessed by coronary CTA was independently associated with minimal microvascular resistance (P < 0.001). The predictive capacity of lumen volume from coronary CTA for detecting high microvascular resistance showed an area under the curve of 0.79 (95% CI: 0.69-0.88). CONCLUSIONS: Patients with CMD and high minimal microvascular resistance have smaller epicardial vessels than those without CMD. Coronary CTA detected high minimal microvascular resistance with very good diagnostic capacity. Coronary CTA could potentially aid in the diagnostic pathway for patients with ANOCA.

Predictors for Vulnerable Plaque in Functionally Significant Lesions.

BACKGROUND: Vulnerable plaque presents prognostic implications in addition to functional significance. OBJECTIVES: The aim of this study was to identify relevant features of vulnerable plaque in functionally significant lesions. METHODS: In this multicenter, prospective study conducted across 5 countries, including patients who had invasive fractional flow reserve (FFR) ≤0.80, a total of 95 patients with available pullback pressure gradient (PPG) and plaque analysis on coronary computed tomographic angiography and optical coherence tomography were analyzed. Vulnerable plaque was defined as the presence of plaque rupture or thin-cap fibroatheroma on optical coherence tomography. Among the 25 clinical characteristics, invasive angiographic findings, physiological indexes, and coronary computed tomographic angiographic findings, significant predictors of vulnerable plaque were identified. RESULTS: Mean percentage diameter stenosis, FFR, and PPG were 77.8% ± 14.6%, 0.66 ± 0.13, and 0.65 ± 0.13, respectively. Vulnerable plaque was present in 53 lesions (55.8%). PPG and FFR were identified as significant predictors of vulnerable plaque (P < 0.05 for all). PPG >0.65 and FFR ≤0.70 were significantly related to a higher probability of vulnerable plaque after adjustment for each other (OR: 6.75 [95% CI: 2.39-19.1]; P < 0.001] for PPG >0.65; OR: 4.61 [95% CI: 1.66-12.8]; P = 0.003 for FFR ≤0.70). When categorizing lesions according to combined PPG >0.65 and FFR ≤0.70, the prevalence of vulnerable plaque was 20.0%, 57.1%, 66.7%, and 88.2% in the order of PPG ≤0.65 and FFR >0.70, PPG ≤0.65 and FFR ≤0.70, PPG >0.65 and FFR >0.70, and PPG >0.65 and FFR ≤0.70 (P for trend < 0.001), respectively. CONCLUSIONS: Among low-FFR lesions, the presence of vulnerable plaque can be predicted by PPG combined with FFR without additional anatomical or plaque characteristics. (Precise Percutaneous Coronary Intervention Plan [P3] Study; NCT03782688).

The effect of hydrostatic pressure on invasive coronary pressure measurements: Comparison with [15O]H2O-positron emission tomography flow data.

BACKGROUND: Fractional flow reserve (FFR) has emerged as the invasive gold standard for assessing vessel-specific ischemia. However, FFR measurements are influenced by the hydrostatic effect, which might adversely impact the assessment of ischemia. AIMS: This study aimed to investigate the impact of hydrostatic pressure on FFR measurements by correcting for the height and comparing FFR with [15O]H2O positron emission tomography (PET)-derived relative flow reserve (RFR). METHODS: The 206 patients were included in this analysis. Patients underwent coronary computed tomography angiography (CCTA), [15O]H2O PET, and invasive coronary angiography with routine FFR in every epicardial artery. Height differences between the aortic guiding catheter and distal pressure sensor were quantified on CCTA images. An FFR ≤ 0.80 was considered significant. RESULTS: The study found a reclassification in 7% of the coronary arteries. Notably, 11% of left anterior descending (LAD) arteries were reclassified from hemodynamically significant to nonsignificant. Conversely, 6% of left circumflex (Cx) arteries were reclassified from nonsignificant to significant. After correcting for the hydrostatic pressure effect, the correlation between FFR and PET-derived RFR increased significantly from r = 0.720 to r = 0.786 (p = 0.009). The average magnitude of correction was +0.05 FFR units in the LAD, -0.03 in the Cx, and -0.02 in the right coronary artery. CONCLUSION: Hydrostatic pressure has a small but clinically relevant influence on FFR measurements obtained with a pressure wire. Correcting for this hydrostatic error significantly enhances the correlation between FFR and PET-derived RFR.

Validation of virtual fractional flow reserve pullback curves.

BACKGROUND: Angiography-derived fractional flow reserve (virtual FFR) has shown excellent diagnostic performance compared with wire-based FFR. However, virtual FFR pullback curves have not been validated yet. OBJECTIVES: To validate the accuracy of virtual FFR pullback curves compared to wire-based FFR pullbacks and to assess their clinical utility using patient-reported outcomes. METHODS: Pooled analysis of two prospective studies, including patients with hemodynamically significant (FFR ≤ 0.80) coronary artery disease (CAD). Virtual and wire-based FFR pullbacks were compared to assess the accuracy of virtual pullbacks to characterize CAD as focal or diffuse. Pullbacks were analyzed visually and quantitatively using the pullback pressure gradient (PPG). Patients underwent PCI, and the Seattle Angina Questionnaire (SAQ) was administered at 3-month follow-up. RESULTS: A total of 298 patients (300 vessels) with both virtual and wire-based pullbacks who underwent PCI were included in the analysis. The mean age was 61.8 ± 8.8, and 15% were female. The agreement on the visual adjudication of the CAD pattern was fair (Cohen's Kappa: 0.31, 95% confidence interval: 0.18-0.45). The mean PPG were 0.65 ± 0.18 from virtual pullbacks and 0.65 ± 0.13 from wire-based pullbacks (r = 0.68, mean difference 0, limits of agreement -0.27 to 0.28). At follow-up, patients with high virtual PPG (>0.67) had higher SAQ angina frequency scores (i.e., less angina) than those with low virtual PPG (SAQ scores 92.0 ± 14.3 vs. 85.5 ± 23.1, p = 0.022). CONCLUSION: Virtual FFR pullback curves showed moderate agreement with wire-based FFR pullbacks. Nonetheless, patients with focal disease based on virtual PPG reported greater improvement in angina after PCI.

Advancements and future perspectives in coronary angiography-derived fractional flow reserve.

Angiography-derived fractional flow reserve (FFR) has emerged as a non-invasive technique to assess the functional significance of coronary artery stenoses. The clinical applications of angiography-derived FFR span a wide range of scenarios, including assessing intermediate coronary lesions and guiding revascularization decisions. This review paper aims to provide an overview of angiography-derived FFR, including its principles, clinical applications, and evidence supporting its accuracy and utility. Lastly, the review discusses future directions and ongoing research in the field, including the integration of angiography-derived FFR into routine clinical practice.

Advanced CT Imaging for the Assessment of Calcific Coronary Artery Disease and PCI Planning.

Vascular calcification is a hallmark of atherosclerosis and adds considerable challenges for percutaneous coronary intervention (PCI). This review underscores the critical role of coronary computed tomography (CT) angiography in assessing and quantifying vascular calcification for optimal PCI planning. Severe calcification significantly impacts procedural outcomes, necessitating accurate preprocedural evaluation. We describe the potential of coronary CT for calcium assessment and how CT may enhance precision in device selection and procedural strategy. These advancements, along with the ongoing Precise Procedural and PCI Plan study, represent a transformative shift toward personalized PCI interventions, ultimately improving patient outcomes in the challenging landscape of calcified coronary lesions.

Novel diagnostic approaches and management of coronary microvascular dysfunction.

The mechanism underlying ischaemic heart disease (IHD) has been primarily attributed to obstructive coronary artery disease (CAD). However, non-obstructive coronary arteries are identified in >50% of patients undergoing elective coronary angiography, recently leading to growing interest in the investigation and management of angina/ischaemia with non-obstructive coronary arteries (ANOCA/INOCA). INOCA is an umbrella term encompassing a multiple spectrum of possible pathogenetic entities, including coronary vasomotor disorders which consist of two major endotypes: coronary microvascular dysfunction (CMD) and vasospastic angina. Both conditions can coexist and be associated with concomitant obstructive CAD. Particularly, CMD refers to myocardial ischaemia due to reduced vasodilatory capacity of coronary microcirculation secondary to structural remodelling or impaired resting microvascular tone (functional) or a combination of both. CMD is not a benign condition and is more prevalent in women presenting with chronic coronary syndrome compared to men. In this setting, an impaired coronary flow reserve has been associated with increased risk of major adverse cardiovascular events. ANOCA/INOCA patients also experience impaired quality of life and associated increased healthcare costs. Therefore, research in this scenario has led to better definition, classification, and prognostic stratification based on the underlying pathophysiological mechanisms. The development and validation of non-invasive imaging modalities, invasive coronary vasomotor function testing and angiography-derived indices provide a comprehensive characterisation of CMD. The present narrative review aims to summarise current data relating to the diagnostic approach to CMD and provides details on the sequence that therapeutic management should follow.

A Systematic Approach to the Evaluation of the Coronary Microcirculation Using Bolus Thermodilution: CATH CMD.

Coronary microvascular dysfunction (CMD) can cause myocardial ischemia in patients presenting with angina without obstructive coronary artery disease (ANOCA). Evaluating for CMD by using the thermodilution technique offers a widely accessible means of assessing microvascular resistance. Through this technique, 2 validated indices, namely coronary flow reserve and the index of microcirculatory resistance, can be computed, facilitating investigation of the coronary microcirculation. The index of microcirculatory resistance specifically estimates minimum achievable microvascular resistance within the coronary microcirculation. We aim to review the bolus thermodilution method, outlining the fundamental steps for conducting measurements and introducing an algorithmic approach (CATH CMD) to systematically evaluate the coronary microcirculation. Embracing a standardized approach, exemplified by the CATH CMD algorithm, will facilitate adoption of this technique and streamline the diagnosis of CMD.

Standards for quantitative assessments by coronary computed tomography angiography (CCTA): An expert consensus document of the society of cardiovascular computed tomography (SCCT).

In current clinical practice, qualitative or semi-quantitative measures are primarily used to report coronary artery disease on cardiac CT. With advancements in cardiac CT technology and automated post-processing tools, quantitative measures of coronary disease severity have become more broadly available. Quantitative coronary CT angiography has great potential value for clinical management of patients, but also for research. This document aims to provide definitions and standards for the performance and reporting of quantitative measures of coronary artery disease by cardiac CT.

Stent sizing by coronary CT angiography compared with optical coherence tomography.

BACKGROUND: Coronary CT angiography (CCTA) is well-established for diagnosis and stratification of coronary artery disease (CAD). Its usefulness in guiding percutaneous coronary interventions (PCI) and stent sizing is unknown. METHODS: This is a sub-analysis of the Precise Percutaneous Coronary Intervention Plan (P3) study (NCT03782688). We analyzed 65 vessels with matched CCTA and pre-PCI optical coherence tomography (OCT) assessment. The CCTA-guided stent size was defined by the mean distal reference lumen diameter rounded up to the nearest stent diameter. The OCT lumen-guided stent size was the mean distal reference lumen diameter rounded to the closest stent diameter. The agreement on stent diameters was determined with Kappa statistics, Passing-Bablok regression analysis, and the Bland-Altman method. RESULTS: The distal reference lumen diameter by CCTA and OCT were 2.75 â€‹± â€‹0.53 â€‹mm and 2.72 â€‹± â€‹0.55 â€‹mm (mean difference 0.06, limits of agreement -0.7 to 0.82). There were no proportional or systematic differences (coefficient A 1.06, 95% CI 0.84 to 1.3 and coefficient B -0.22, 95% CI -0.83 to 0.36) between methods. The agreement between the CCTA and OCT stent size was substantial (Cohen's weighted Kappa 0.74, 95% CI 0.64 to 0.85). Compared to OCT stent diameter, CCTA stent size was concordant in 52.3% of the cases; CCTA overestimated stent size in 20.0% and underestimated in 27.7%. CONCLUSION: CCTA accurately assessed the reference vessel diameter used for stent sizing. CCTA-based stent sizing showed a substantial agreement with OCT. CCTA allows for PCI planning and may aid in selecting stent diameter.

Percutaneous coronary intervention for bifurcation coronary lesions using optimised angiographic guidance: the 18th consensus document from the European Bifurcation Club.

The 2023 European Bifurcation Club (EBC) meeting took place in Warsaw in October, and the latest evidence for the use of intravascular ultrasound (IVUS) and optical coherence tomography (OCT) to optimise percutaneous coronary interventions (PCI) on coronary bifurcation lesions (CBLs) was a major focus. The topic generated deep discussions and general appraisal on the potential benefits of IVUS and OCT in PCI procedures. Nevertheless, despite an increasing recognition of IVUS and OCT capabilities and their recognised central role for guidance in complex CBL and left main PCI, it is expected that angiography will continue to be the primary guidance modality for CBL PCI, principally due to educational and economic barriers. Mindful of the restricted access/adoption of intracoronary imaging for CBL PCI, the EBC board decided to review and describe a series of tips and tricks which can help to optimise angiography-guided PCI for CBLs. The identified key points for achieving an optimal angiography-guided PCI include a thorough analysis of pre-PCI images (computed tomography angiography, multiple angiographic views, quantitative coronary angiography vessel estimation), a systematic application of the technical steps suggested for a given selected technique, an intraprocedural or post-PCI use of stent enhancement and a low threshold for bailout use of intravascular imaging.

The Influence of Epicardial Resistance on Microvascular Resistance Reserve.

BACKGROUND: The optimal index of microvascular function should be specific for the microvascular compartment. Yet, coronary flow reserve (CFR), despite being widely used to diagnose coronary microvascular dysfunction (CMD), is influenced by both epicardial and microvascular resistance. Conversely, microvascular resistance reserve (MRR) adjusts for fractional flow reserve (FFR), and thus is theoretically independent of epicardial resistance. OBJECTIVES: The authors tested the hypothesis that MRR, unlike CFR, is not influenced by increasing epicardial resistance, and thus is a more specific index of microvascular function. METHODS: In a cohort of 16 patients who had undergone proximal left anterior descending artery stenting, we created 4 grades of artificial stenosis (no stenosis, mild, moderate, and severe) using a coronary angioplasty balloon inflated to different degrees within the stent. For each stenosis grade, we calculated CFR and MRR using continuous thermodilution (64 measurements of each) to assess their response to changing epicardial resistance. RESULTS: Graded balloon inflation resulted in a significant sequential decrease in mean FFR (no stenosis: 0.82 ± 0.05; mild: 0.72 ± 0.04; moderate: 0.61 ± 0.05; severe: 0.48 ± 0.09; P < 0.001). This translated into a linear decrease in mean hyperemic coronary flow (no stenosis: 170.5 ± 66.8 mL/min; mild: 149.8 ± 58.8 mL/min; moderate: 124.4 ± 53.0 mL/min; severe: 94.0 ± 45.2 mL/min; P < 0.001). CFR exhibited a marked linear decrease with increasing stenosis (no stenosis: 2.5 ± 0.9; mild: 2.2 ± 0.8; moderate: 1.8 ± 0.7; severe: 1.4 ± 0.6), corresponding to a decrease of 0.3 for a decrease in FFR of 0.1 (P < 0.001). In contrast, MRR exhibited a negligible decrease across all stenosis grades (no stenosis: 3.0 ± 1.0; mild: 3.0 ± 1.0; moderate: 2.9 ± 1.0; severe: 2.8 ± 1.0), corresponding to a decrease of just 0.05 for a decrease in FFR of 0.1 (P < 0.001). CONCLUSIONS: MRR, unlike CFR, is minimally influenced by epicardial resistance, and thus should be considered the more specific index of microvascular function. This suggests that MRR can also reliably evaluate microvascular function in patients with significant epicardial disease.