Minimally-invasive definitive treatment of recurrent sialadenitis due to obstructive sialolithiasis - a case report.

Introduction: Salivary gland lithiasis is one of the most frequent causes of sialadenitis. We report the case of a patient who presented multiple episodes of subangulomandibular tumefaction, until salivary lithiasis was finally identified as the underlying condition and resolved through a minimally invasive approach. Case report: A 43-year-old male patient presented with a history of 12 episodes of recurring one-sided subangulomandibular tumefaction over the course of the past 3 years. A computed tomography of the head and neck revealed a large calculus on Wharton's duct and right lithiasic submaxillitis. Non-steroidal anti-inflammatory treatment and antibiotic treatment was administered, and after the complete resolution of the acute process, we performed a sialendoscopically-assisted sialolithotomy with complete removal of the calculus. Following the procedure, the patient was discharged on the same day, clinically well, and displayed no further recurrences over a follow-up duration of 12 months. Conclusions: The case we have reported highlights the importance of performing a correct differential diagnosis and of determining the underlying cause of recurrent sialadenitis, in order to ensure the most adequate therapeutic and, when warranted, minimally-invasive surgical management for definitive treatment.

Survival and mechanical complications of single- and multiple-unit cement-retained posterior implant-supported restorations with custom CAD/CAM Atlantis titanium abutments: An up to 10-year retrospective analysis.

PURPOSE: To evaluate the survival of and incidence of mechanical complications with single- and multiple-unit cement-retained posterior implant-supported restorations with custom CAD/CAM Atlantis titanium abutments (Dentsply Sirona, Charlotte, NC, USA). MATERIALS AND METHODS: This retrospective clinical study analysed 196 Astra Tech OsseoSpeed TX Internal Hexagon implants (Dentsply Sirona) placed in 85 patients between January 2011 and January 2021. Customised Atlantis titanium abutments and cement-retained metal-ceramic crowns were employed. The clinical outcomes recorded were implant and abutment survival rates, and mechanical complications. The results were analysed according to implant length and diameter, arch, implant position and single- or multiple-unit restoration. RESULTS: Over the observation period (up to 10 years), implant and abutment survival rates were 98.5% and 100.0%, respectively. The mean observation period for the single- and multiple-unit implant-supported restorations was 106.00 ± 20.84 months, with a minimum of 41 months and a maximum of 120 months. For the 67 single-unit and 129 multiple-unit posterior implant-supported restorations, four mechanical complications were recorded: two cases of screw loosening, one case of chipping or fracture of veneering materials, and one case of crown decementation. No screw or abutment fractures were observed. CONCLUSIONS: According to the results of this retrospective clinical study, cement-retained posterior implant-supported restorations with custom CAD/CAM Atlantis titanium abutments showed high survival rates over a follow-up period of up to 10 years. No statistically significant differences were recorded when comparing implant position, implant diameter, implant length, single- versus multiple-unit restoration and arch.

Research trends and perspectives on immediate facial reanimation in radical parotidectomy (Review).

For patients diagnosed with advanced malignant parotid tumour, radical parotidectomy with facial nerve sacrifice is part of the treatment. Multiple surgical techniques have been developed to cure facial paralysis in order to restore the function and aesthetics of the face. Despite the large number of publications over time on facial nerve reanimation, a consensus on the timing of the procedure or the donor graft selection has remained to be established. Therefore, the aim of the present study was to conduct a bibliometric analysis to identify and analyse scientific publications on the reconstruction of the facial nerve of patients who underwent radical parotidectomy with facial nerve sacrifice. The analysis on the topic was conducted using the built-in tool of the Scopus database and VOSviewer software. The first 100 most cited articles were separately reviewed to address the aim of the study. No consensus was found regarding the recommended surgical techniques for facial nerve reanimation. The most used donor cranial nerves for transfer included the following: Masseteric branch of the V nerve, contralateral VII nerve with cross-face graft, the XI nerve and the XII nerve. The best timing of surgery is also controversial depending on pre-exiting pathology and degree of nerve degeneration. However, most of the clinical experience suggests facial nerve restoration immediately after the ablative procedure to reduce complications and improve patients' quality of life.

One-Year Multicenter Randomised Controlled Trial Comparing OT Equator® and Locator Attachments to Retain an Early Loaded Implant Overdenture on Two Implants.

This investigation aimed to compare the effectiveness of the OT Equator® (Rhein, Bologna, Italy) and the Locator attachment systems used to retain early loaded implant-retained overdentures. This study was designed as a multicenter randomised controlled trial of parallel groups. After implant placement, the patients were randomised to receive OT Equator® attachments in the test group or Locator attachments in the control group. The outcome measures were implant and prosthetic success and survival rates, any biological and technical complication, marginal bone loss, patients' satisfaction, and periodontal parameters. Overall, 42 patients were consecutively enrolled and treated. One implant was lost in the control group, while no implants were lost in the test group. No prostheses failed in both groups. Only a few complications were experienced in both groups. The main was represented by loss of retention of the attachments (retentive caps). The OT Equator® attachment showed statistically lower periodontal parameters. In conclusion, both attachment systems were suitable for overdenture implant retention.

Intraindividual Left-Right Side Differences of Sagittal Condylar Inclination (SCI) in Different Skeletal Classes.

(1) Background: The temporomandibular joint (TMJ) is the most complex and one of the most important joints in the human body due to its essential roles in mastication, swallowing, breathing and speech. Several instruments have been used to track mandibular movements and register the characteristic parameters of the TMJ, among which condylography instruments are validated for the accurate clinical registration of the condylar path. Sagittal condylar inclination (SCI) is one of the most important parameters, together with the Bennett angle and the immediate side shift, used for articular settings in the process of oral rehabilitation. The aim of the present study was to evaluate the differences between the left and right SCI and to assess whether the differences were statistically significant for skeletal class, age, gender, dentate status, TMJ pathology or parafunctional habits. (2) Methods: One hundred and forty consecutive patients, fully dentate or partially edentulous, and with angle class I, II and II, were recruited. Their left and right SCIs were determined with an ultrasonic jaw tracking device. Each subject had to make three protrusive movements and three right and left laterotrusive movements. The software calculated the SCI from the mean of the protrusive movements. (3) Results: The mean values obtained for the right and left SCI were 34.68° (±12.44°) and 34.94° (±13.23°), respectively, with no statistically significant differences between the left and right values for gender, dentate status, TMJ disorders or parafunctional habits. Skeletal class III subjects registered lower SCI means, which were statistically significant for the left SCI. (4) Conclusions: For an optimal functionalization of prosthetic restorations and for an ideal treatment plan, the registration of both the left and right paths of the condyles and the articular disc should be taken into consideration.

Buccally or Lingually Tilted Implants in the Lateral Atrophic Mandible: A Three-Year Follow-Up Study Focused on Neurosensory Impairment, Soft-Tissue-Related Impaction and Quality of Life Improvement.

Background and Objectives: In the severely resorbed posterior mandible, implant placement requires either bone regenerative procedures, subperiosteal implants or short implant placement with drawbacks including morbidity and increased treatment costs and duration. To overcome these inconveniences, some unconventional alternatives have been suggested, such as buccally or lingually tilted implants in the lateral mandible, bypassing the inferior alveolar nerve. The aim of the present retrospective study was to evaluate the three-year survival rate of implants inserted in the posterior atrophic mandible, bypassing the inferior alveolar nerve. The assessment was focused on the occurrence of postoperative complications related to neurosensory impairment and soft tissue impaction, as well as overall improvement in quality of life. Materials and Methods: Patients with severe bone atrophy in the lateral area of the mandible were included in the present study. Only the implants tilted either buccally or lingually to bypass the inferior alveolar nerve were analysed. The relation between peri-implant soft tissue and the healing abutment was assessed and a secondary revision surgery was performed when indicated. The Semmes-Weinstein pressure neurological test was used for qualitative assessment of inferior alveolar nerve function and the Geriatric Oral Health Assessment Index (GOHAI) was used for evaluating Oral-Health-Related Quality of Life (OHRQoL). Results: Fourteen implants were placed in nine patients during the evaluation period. Survival rate was 100%, temporary paraesthesia occurred in one patient and a limited definitive paraesthesia was seen in another patient. Mild or significant discomfort related to soft tissue impaction with healing abutment was observed in six out of nine patients. A statistically significant OHRQoL improvement was observed in all patients. Conclusions: Despite the limited number of patients and observation time, insertion of implants buccally or lingually bypassing the inferior alveolar nerve is a predictive treatment option for patients with severe bone atrophy in the posterior mandible.

Barriers and Facilitators of Romanian HPV (Human Papillomavirus) Vaccination.

BACKGROUND: Many countries had initial success with HPV vaccination campaigns worldwide. The HPV vaccine coverage during the COVID-19 pandemic dropped consistently. The aim of our research is to assess the barriers and facilitators of the current Romanian HPV vaccination campaign. METHODS: An analytical cross-sectional observational survey was conducted in the Romanian general population; a self-administered questionnaire was used. RESULTS: 1122 responders were interviewed; 666 (59.36%) were parents, and 67 (5.97%) HPV vaccinated themselves. A multinominal logistic regression carried out in the parents' category showed that women with university studies and informed from medical sources have greater chances to HPV vaccinate. Reticence regarding vaccination comes from the high cost of the vaccine and a lack of information. Only 118 (10.51%) vaccinated against HPV. From the logistic regression analysis, gender (ORa 0.461 = 95% CI: (0.196; 1.083)), geographic area of residence (ORa = 0.517; 95% CI: (0.331; 0.807)), and the inclusion of the HPV vaccine in the National Vaccination Program (ORa = 2.4; 95% CI: (1.361; 4.235)) were the factors found most associated with HPV vaccination. CONCLUSIONS: In the general population, the inclusion of HPV vaccination in the National Vaccination Program would be the most important facilitator of HPV vaccination in Romania. In parents that did not vaccinate their children, one important barrier to HPV vaccination was the high cost of the HPV vaccine and the lack of proper information. The acceptability of HPV vaccination in Romania is low; therefore, public health educational programs are needed.

COVID-19 Parental Vaccine Hesitancy in Romania: Nationwide Cross-Sectional Study.

BACKGROUND: COVID-19 vaccination started in Romania in December 2020. Child vaccination started in 2021 with children aged 12-15 years in August. For children aged 5-11 years, vaccination started in January 2022. The aim of our study was to describe COVID-19 vaccination hesitancy in Romanian children and vaccine acceptability in the general population. As parental consent is required for child vaccination in Romania, these aspects have a significant association. METHODS: An analytical cross-sectional survey was conducted in October and November 2021 during the peak of the 4th COVID-19 wave. RESULTS: After validation, 1645 participants formed the main study group: median age 35 years, 72.83% women, and 35.44% from the medical domain. In total, 1311 (79.70%) participants were vaccinated against COVID-19 and 188 (11.42%) had vaccinated their 12-18-year-old children against COVID-19. Parents' level of education, geographic area of residence, and COVID-19 vaccination status were significantly associated with COVID-19 vaccination. The hesitancy factors of child vaccination included the novelty of COVID-19 vaccines (62, 47.32%), fear of adverse reactions (32, 24.42%), and anti-vaccinism in general (29, 22.13%). In the studied group, only 188 (11.42%) participants recommended vaccination of 5-11-year-old children. Vaccine acceptability was higher in the general population (1311, 79.70%) than in the medical domain (326 out of 583, 55.91%). General vaccine hesitancy was based mainly on beliefs regarding inefficiency (131, 39.22%) and fears about the side effects of the vaccine (76, 22.75%). CONCLUSIONS: Overall, the acceptability of COVD-19 vaccines in the Romanian population was influenced by the level of education, area of residence, and being a COVID-19-vaccinated parent. Public health intervention programs are essential.

Considerations on the Controlled Delivery of Bioactive Compounds through Hyaluronic Acid Membrane.

(1) Background: The standard treatment for periodontal disease, a chronic inflammatory state caused by the interaction between biofilms generated by organized oral bacteria and the local host defense response, consists of calculus and biofilm removal through mechanical debridement, associated with antimicrobial therapy that could be delivered either systemically or locally. The present study aimed to determine the effectiveness of a hyaluronic acid membrane matrix as a carrier for the controlled release of the active compounds of a formulation proposed as a topical treatment for periodontal disease, and the influence of pH on the complex system's stability. (2) Methods: The obtained hyaluronic acid (HA) hydrogel membrane with dispersed melatonin (MEL), metronidazole (MZ), and tetracycline (T) was completely characterized through FTIR, XRD, thermal analysis, UV-Vis and fluorescence spectroscopy, fluorescence microscopy, zeta potential and dielectric analysis. The MTT viability test was applied to check the cytotoxicity of the obtained membranes, while the microbiological assessment was performed against strains of Staphylococcus spp. and Streptococcus spp. The spectrophotometric investigations allowed to follow up the release profile from the HA matrix for MEL, MZ, and T present in the topical treatment considered. We studied the behavior of the active compounds against the pH of the generated environment, and the release profile of the bioactive formulation based on the specific comportment towards pH variation. The controlled delivery of the bioactive compounds using HA as a supportive matrix was modeled applying Korsmeyer-Peppas, Higuchi, first-order kinetic models, and a newly proposed pseudo-first-order kinetic model. (3) Results: It was observed that MZ and T were released at higher active concentrations than MEL when the pH was increased from 6.75, specific for patients with periodontitis, to a pH of 7.10, characterizing the healthy patients. Additionally, it was shown that for MZ, there is a burst delivery up to 2.40 × 10-5 mol/L followed by a release decrease, while for MEL and T a short release plateau was recorded up to a concentration of 1.80 × 10-5 mol/L for MEL and 0.90 × 10-5 mol/L for T, followed by a continuous release; (4) Conclusions: The results are encouraging for the usage of the HA membrane matrix as releasing vehicle for the active components of the proposed topical treatment at a physiological pH.

Preliminary Study with the Use of a Titanium Mesh as Space Maker and Implant Primary Stabilization for One-Stage Sinus Lift in Cases with Less Than 1.5 mm Residual Bone.

(1) Background: In the lateral area of the maxilla, the alveolar bone can lose significant volume due to maxillary sinus pneumatization following teeth extractions. This preliminary study evaluated the effectiveness of a novel technique for one-stage sinus lifting and simultaneous implant placement in cases with less than 1.5 mm residual alveolar bone. The subsequent survival rate at 1-year post-occlusal loading was assessed. (2) Methods: 15 patients were selected, the main inclusion criteria were the partially edentulous area in the posterior maxilla with alveolar bone height of less than 1.5 mm below the sinus. All of the patients underwent one-stage sinus lifting, along with simultaneous implant placement using a "butterfly" anchorage device to optimize the primary stability and xenograft bone as graft material. At 6 to 9 months after surgery, the anchorage device was removed and implants were loaded. Panoramic x-ray images were used to assess the new bone formation, while the biological stability was measured using resonance frequency analysis. (3) Results: 15 implants were inserted. The mean implant stability quotient (ISQ) value was 71.3 (SD = ±2.51) and the mean healing period was 7.3 (SD = ±1.23) months. The mean bone height after the healing period was 14.4 (SD = ±2.05). A statistically significant correlation was found between the healing period and the ISQ value (Spearman rho = 0.684, sig. = 0.005). No statistically significant correlation was found between the ISQ value and the new regenerated bone height (Person r = 0.389, sig. = 0.152). Smoking was identified as a risk factor involved in postoperative complications. (4) Conclusions: The results of the present preliminary study demonstrated that the proposed "butterfly" technique was effective when performing one-stage sinus lifting and simultaneous implant placement in cases with less than 1.5 mm of residual alveolar bone. The survival rate was 100% at 1-year post occlusal loading.

Rehabilitation of extremely atrophic edentulous mandible in elderly patients with associated comorbidities: a case report and proof of concept.

BACKGROUND: Oral rehabilitation of the atrophic mandible is, most of the time, a challenging procedure, especially in elderly patients with associated comorbidities. CASE PRESENTATION: This clinical report describes the rehabilitation of an extremely atrophic mandible using an overdenture supported by four splinted implants, two of which are placed in the interforaminal region and the other two bypassing the inferior alveolar nerve at the level of the antegonial notch. A passive-fit bar structure splinting the four inserted implants was designed to compensate for mandibular flexure, to reduce the amount of strain on the implants, and avoid bone resorption and prosthetic failure. The 14-month postoperative cone-beam computed tomography (CBCT) and the clinical follow-up showed the bilateral integrity of the inferior alveolar nerve and the successful restoration of the atrophic edentulous mandible with a significant improvement in the patient's quality of life. CONCLUSIONS: The applied technique depicts several benefits such as a minimally invasive approach, reduced number of surgical interventions, reduced total treatment time, reduced treatment costs, and higher psychological acceptability.

Accuracy, Labor-Time and Patient-Reported Outcomes with Partially versus Fully Digital Workflow for Flapless Guided Dental Implants Insertion-A Randomized Clinical Trial with One-Year Follow-Up.

(1) Background: Prosthetically-driven implant positioning is a prerequisite for long-term successful treatment. Transferring the planned implant position information to the clinical setting could be done using either static or dynamic guided techniques. The 3D model of the bone and surrounding structures is obtained via cone beam computed tomography (CBCT) and the patient's oral condition can be acquired conventionally and then digitalized using a desktop scanner, partially digital workflow (PDW) or digitally with the aid of an intraoral scanner (FDW). The aim of the present randomized clinical trial (RCT) was to compare the accuracy of flapless dental implants insertion in partially edentulous patients with a static surgical template obtained through PDW and FDW. Patient outcome and time spent from data collection to template manufacturing were also compared. (2) Methods: 66 partially edentulous sites (at 49 patients) were randomly assigned to a PDW or FDW for guided implant insertion. Planned and placed implants position were compared by assessing four deviation parameters: 3D error at the entry point, 3D error at the apex, angular deviation, and vertical deviation at entry point. (3) Results: A total of 111 implants were inserted. No implant loss during osseointegration or mechanical and technical complications occurred during the first-year post-implants loading. The mean error at the entry point was 0.44 mm (FDW) and 0.85 (PDW), p ≤ 0.00; at implant apex, 1.03 (FDW) and 1.48 (PDW), p ≤ 0.00; the mean angular deviation, 2.12° (FDW) and 2.48° (PDW), p = 0.03 and the mean depth deviation, 0.45 mm (FDW) and 0.68 mm (PDW), p ≤ 0.00; (4) Conclusions: Despite the statistically significant differences between the groups, and in the limits of the present study, full digital workflow as well as partially digital workflow are predictable methods for accurate prosthetically driven guided implants insertion.

Questionnaire-Based Assessment of the Masticatory Function and Facial Nerve Recovery Post Pterional Approach in Brain Tumors Surgery.

BACKGROUND: The pterional approach for craniotomy, one of the most used surgical intervention in neurosurgery, results in a series of postoperative changes that, if they persist, affect the patient's life, social reintegration, and his/her physical and mental recovery. The aim of the present study was to develop and validate a questionnaire for indicating directly affected masticatory muscles groups and facial nerve branches, in patients undergoing the pterional approach in neurosurgery, so that the recovery therapy can be monitored and personalized. METHODS: A self-reporting questionnaire consisting of 18 items (12 for postoperative masticatory status and 6 for facial nerve branches involvement), validated on fifteen patients, following three steps: items development, scale development, and scale evaluation, was prospectively applied twice, at a one-year interval (T0 and T1), with thirty-two patients suffering from vascular or tumoral pathology and surgically treated through a pterional approach. RESULTS: No statistically significant correlation could be found between postoperative outcomes and age or gender. Facial nerve branch involvement could not be correlated with any of the assessed variables. Pathology and time elapsed from surgery were statistically significantly correlated to preauricular pain on the non-operated side (p = 0.008 and p = 0.034, respectively). Time elapsed from surgery was statistically significantly correlated to the ability to chew hard food, pain while yawning, and preauricular pain during back and forward jaw movements and gradual mouth opening. CONCLUSIONS: We created and validated a valuable patient-centered questionnaire that can be employed as a tool for postoperative assessment of directly affected masticatory muscles and groups of facial nerve branches.

A Predictable Approach of a Rare and Frequently Misdiagnosed Entity: Laryngeal Nerve Schwannoma.

(1) Background: Schwannoma, a mesenchymal neoplasm derived from Schwann cells that line peripheral nerve sheaths, has a challenging diagnosis, due to the non-specific medical history and clinical examination. Nowadays, virtual reality (VR) is increasingly more used for enhancing diagnosis and for preoperative planning of surgical procedures. With VR, the surgeon can interact, before any surgery, with a virtual environment that is completely generated by a computer, offering them a real experience inside a virtual 3D model. (2) Methods and Results: The aim of the present paper was to present a case of surgically removal of a schwannoma, which originated from the fibers of the superior laryngeal nerve, in a predictable and minimally invasive fashion, upon using VR for diagnosis and surgical procedure planning. (3) Conclusions: The current clinical report attracted the attention of including schwannoma in the possible differential diagnosis of a swelling in the anterior cervical region, mainly when a nonspecific radiological appearance is noticed, even with the use of multiple imaging modalities. Virtual reality can increase the predictability and success rate of the surgical procedure, being in the meantime a good tool for communication with the patient.

Effect of supporting implants inclination on stability of fixed partial denture: A finite element study.

The aim of this finite element study was to analyze effect of supporting implants inclination on stress distribution in the bone for a four-unit fixed partial denture. A three-dimensional finite element model of mandibular molar section of the bone to receive implants was constructed. Three implant-supported fixed partial dentures, with null, moderate and wide tilting, of 0°, 15° and 30° implant inclinations, respectively, were modeled. A mechanical load of 10 MPa was applied in coronal-apical direction on bridge framework at the regions of crowns positions. The finite element analysis was performed, and von Mises stress levels were calculated. Peak stress concentration in the cortical bone was observed mostly around the implant necks, in inter-implants line. There was favorable stress distribution during loading, with peak stress being 90.04 MPa for 0°, which decreased to 54.33 MPa for 15° and 46.36 MPa for 30° inclination. The supporting implants inclination in fixed partial denture plays an important role in stress distribution and may be helpful in preventing bone loss and implant failure. This phenomenon is likely to be more pronounced in bones of poor quality. Within the limitation of this study, it seems that the inclination of implants in fixed partial denture has a favorable effect on stress distribution pattern values around the supporting implants.

Eighteen Months Follow-Up with Patient-Centered Outcomes Assessment of Complete Dentures Manufactured Using a Hybrid Nanocomposite and Additive CAD/CAM Protocol.

Abstract: The present study aimed to assess the eighteen month follow-up patient-centered outcomes of a simple and predictable protocol for 3D-printed functional complete dentures manufactured using an improved poly(methyl methacrylate) (PMMA)-nanoTiO2. A detailed morphological and structural characterization of the PMMA-TiO2 nanocomposite, using SEM, EDX, XRD, and AFM, after 3D-printing procedure and post-wearing micro-CT, was also performed. METHODS: A total of 35 fully edentulous patients were enrolled in this prospective study. A 0.4% TiO2-nanoparticle-reinforced PMMA composite with improved mechanical strength, morphologically and structurally characterized, was used according to an additive computer-aided design and computer-aided manufacturing (CAD/CAM) protocol for complete denture fabrication. The protocol proposed involved a three-step appointment process. Before denture insertion, 1 week, 12 month, and 18-month follow up patients were evaluated via the Visual Analogue Scale (VAS, 0-10) and Oral Health Impact Profile for Edentulous Patients (OHIP-EDENT), with a higher score meaning poor quality of life. RESULTS: A total of 45 complete denture sets were inserted. OHIP-EDENT scored significantly better after 18 months of denture wearing, 20.43 (±4.42) compared to 52.57 (±8.16) before treatment; mean VAS was improved for all parameters assessed. CONCLUSIONS: Within the limitations of this study, we can state that the proposed workflow with the improved material used is a viable treatment option for patients diagnosed with complete edentulism.

Non-Resorbable Nanocomposite Membranes for Guided Bone Regeneration Based On Polysulfone-Quartz Fiber Grafted with Nano-TiO2.

The polymer-inorganic nanoparticles composite membranes are the latest solutions for multiple physicochemical resistance and selectivity requirements of membrane processes. This paper presents the production of polysulfone-silica microfiber grafted with titanium dioxide nanoparticles (PSf-SiO2-TiO2) composite membranes. Silica microfiber of length 150-200 µm and diameter 12-15 µm were grafted with titanium dioxide nanoparticles, which aggregated as microspheres of 1-3 µm, applying the sol-gel method. The SiO2 microfibers grafted with nano-TiO2 were used to prepare 12% polysulfone-based nanocomposite membranes in N-methyl pyrrolidone through the inversion phase method by evaporation. The obtained nanocomposite membranes, PSf-SiO2-TiO2, have flux characteristics, retention, mechanical characteristics, and chemical oxidation resistance superior to both the polysulfone integral polymer membranes and the PSf-SiO2 composite membranes. The antimicrobial tests highlighted the inhibitory effect of the PSf-SiO2-TiO2 composite membranes on five Gram (-) microorganisms and did not allow the proliferation of Candida albicans strain, proving that they are suitable for usage in the oral environment. The designed membrane met the required characteristics for application as a functional barrier in guided bone regeneration.

The influence of temporomandibular joint movement parameters on dental morphology.

Association between tooth morphology, occlusal relations and mandibular condyle/glenoid fossa morphology is still a controversial issue in dentistry. The aim of the present study was to examine the influence of three important articular parameters on the dental morphology and the crown volume, quantifying the variation for each tooth group: incisor, canine, premolar and molar. MATERIALS AND METHODS: All maxillary teeth from a set of basic study models were prepared for zirconia single crowns. The models were scanned and then, using a computer aided design software, they were mounted in a virtual articulator and specific mandibular movements were defined. The crown morphology was designed and statically adapted. Ten models were obtained by dynamical adjustment of the basic model for successively modified articular parameters: sagittal condylar inclination (SCI)=30°, Bennett angle (BA)=10°, Immediate side shift (ISS)=0.5mm - for control and SCI: 40°, 50° and 60° with BA and ISS as control, BA: 15°, 20° and 25° with SCI and ISS as control, ISS: 1.5mm, 1.0mm and 0.0mm with SCI and BA as control - for the nine test models. The following measurements were performed three times on the right side of each model: volume for each tooth group, slope (S) for the central incisor, S and mesio-distal angle (MDA) for canine, S, MDA and vestibulo-oral angle (VOA) for the first premolar and molar. RESULTS: When SCI was varied, statistically significant changes as compared to the controls were found for incisor's and premolar's S, premolar's VOA and, for 50° and 60°, MDA and molar's MDA (for 50°) and VOA (for 60°). When BA was varied, significant changes were found for S (canine) and, in certain models, MDA (premolar, molar). Variations of ISS significantly changed mainly MDA for molars and, in two models, premolars. CONCLUSIONS: Within the limits of this study, among the articular parameters, SCI mostly influenced the dynamic tooth morphology, but canine and molar morphology was stronger influenced by BA and/or ISS.

New sensor based on membranes with magnetic nano-inclusions for early diagnosis in periodontal disease.

A series of sodium selective membranes with magnetic nano-inclusions using p-tertbutyl calix[4]arene as ionophore and polymeric matrix (polyvinyl chloride) have been developed, and the corresponding sodium selective sensors were obtained for the first time. A linear range was registered between 3.1 × 10-5 and 10-1moldm-3 and near Nernstian electrochemical answer: 55.73mV/decade has been recoreded for PVC (polyvinyl chloride) - based sodium selective sensor, with a response time of 45s. Due to their small dimensions, sensors could be used for measuring ions from the gingival crevicular fluid directly into the peri-odontal pocket, avoiding the difficulties of collecting an appropriate amount of fluid for analysis. Alterations in the inorganic ions level could be evidenced with this new device, assisting the early diagnosis and prevention of periodontal disease.