Fibronectin/thermo-responsive polymer scaffold as a dynamic ex vivo niche for mesenchymal stem cells.

In this paper, we created a dynamic adhesive environment (DAE) for adipose tissue-derived mesenchymal stem cells (ADMSCs) cultured on smart thermo-responsive substrates, i.e., poly (N-isopropyl acrylamide) (PNIPAM), via introducing periodic changes in the culture temperature. We further explored the particular role of adsorbed fibronectin (FN), an important cell adhesive protein that was recently attributed to the recruitment of stem cells in the niche. The engineered FN/PNIPAM DAE system significantly increased the symmetric renewal of ADMSCs, particularly between passages 7 and 9 (p7-p9), before it dropped down to the level of the control (FN-coated TC polystyrene). This decline in the growth curve was consistent with the increased number of senescent cells, the augmented average cell size and the suppressed FN matrix secretion at late passages (p10-p12), all of them characteristic for stem cells ageing, which equivocally tended to slow down at our DAE system. FN supported also the osteogenic response of ADMSCs (apart from the previous observations with plain PNIPAM substrata) indicated by the significant increase of alkaline phosphatase (ALP) activity at days 7 and 14. The minimal changes in the Ca deposition, however, suggest a restricted effect of DAE on the early osteogenic response of ADMSCs only. Thus, the engineering of niche-like DAE involving FN uncovers a new tissue engineering strategy for gaining larger amounts of functionally active stem cells for clinical application.

Establishing multiple osteogenic differentiation pathways of mesenchymal stem cells through different scaffold configurations.

Mimicking the complex organization of the extracellular matrix (ECM), especially its structure and dimensionality, is necessary to produce living tissues from stem cells. In compliance with a previously established role of nanofiber organization for the osteogenic differentiation of stem cells, here we used hybrid fibrinogen/poly(l-lactide-ε-caprolactone) (FBG/PLCL) nanofibers arranged in aligned and honeycomb configurations, to recapitulate the highly oriented ECM of the cortical bone and the sponge-like (i.e., honeycomb) environment of the cancellous one, respectively. Using special bilayered constructs, we demonstrate that the dimensionality (i.e., 2D vs. 3D) of the nanofibers as well as their architecture (i.e., honeycomb vs. aligned) affects differently the overall morphology and the expression of multiple osteogenic genes of human adipose-derived mesenchymal stem cells (ADMSCs). The cells had elongated shape with markedly increased cell mobility when seeded on aligned nanofibers. Conversely, on honeycomb-shaped nanofibers, ADMSCs initially concentrated inside the honeycomb curvatures adopting rounded morphology, but late, they formed network-like structures overlaying the honeycomb curvatures. By employing quantitative polymerase chain reaction (qPCR), we further show that a 3D environment generally supports the multiple osteogenic response of ADMSCs, but honeycomb and aligned architectures promote rather different differentiation pathways.

δ-Tocopherol Effect on Endocytosis and Its Combination with Enzyme Replacement Therapy for Lysosomal Disorders: A New Type of Drug Interaction?

Induction of lysosomal exocytosis alleviates lysosomal storage of undigested metabolites in cell models of lysosomal disorders (LDs). However, whether this strategy affects other vesicular compartments, e.g., those involved in endocytosis, is unknown. This is important both to predict side effects and to use this strategy in combination with therapies that require endocytosis for intracellular delivery, such as lysosomal enzyme replacement therapy (ERT). We investigated this using δ-tocopherol as a model previously shown to induce lysosomal exocytosis and cell models of type A Niemann-Pick disease, a LD characterized by acid sphingomyelinase (ASM) deficiency and sphingomyelin storage. δ-Tocopherol and derivative CF3-T reduced net accumulation of fluid phase, ligands, and polymer particles via phagocytic, caveolae-, clathrin-, and cell adhesion molecule (CAM)-mediated pathways, yet the latter route was less affected due to receptor overexpression. In agreement, δ-tocopherol lowered uptake of recombinant ASM by deficient cells (known to occur via the clathrin pathway) and via targeting intercellular adhesion molecule-1 (associated to the CAM pathway). However, the net enzyme activity delivered and lysosomal storage attenuation were greater via the latter route. Data suggest stimulation of exocytosis by tocopherols is not specific of lysosomes and affects endocytic cargo. However, this effect was transient and became unnoticeable several hours after tocopherol removal. Therefore, induction of exocytosis in combination with therapies requiring endocytic uptake, such as ERT, may represent a new type of drug interaction, yet this strategy could be valuable if properly timed for minimal interference.

Recombinant fibronectin fragment III8-10/polylactic acid hybrid nanofibers enhance the bioactivity of titanium surface.

AIM: To develop a nanofiber (NF)-based biomimetic coating on titanium (Ti) that mimics the complex spatiotemporal organization of the extracellular matrix (ECM). MATERIALS & METHODS: Recombinant cell attachment site (CAS) of fibronectin type III8-10 domain was co-electrospun with polylactic acid (PLA) and covalently bound on polished Ti discs. Osteoblast-like SaOS-2 cells were used to evaluate their complex bioactivity. RESULTS: A significant increase of cell spreading was found on CAS/PLA hybrid NFs, followed by control pure PLA NFs and bare Ti discs. Cell proliferation showed similar trend being about twice higher on CAS/PLA NFs. The significantly increased ALP activity at day 21 indicated an enhanced differentiation of SaOS-2 cells. CONCLUSION: Coating of Ti implants with hybrid CAS/PLA NFs may improve significantly their osseointegration potential.

Osteogenic differentiation of mesenchymal stem cells using hybrid nanofibers with different configurations and dimensionality.

Novel, hybrid fibrinogen/polylactic acid (FBG/PLA) nanofibers with different configuration (random vs aligned) and dimensionality (2-D vs 3-D environment) were used to control the overall behavior and the osteogenic differentiation of human adipose-derived mesenchymal stem cells (ADMSCs). Aligned nanofibers in both the 2-D and 3-D configurations are proved to be favored for osteodifferentiation. Morphologically, we found that on randomly configured nanofibers, the cells developed a stellate-like morphology with multiple projections; however, time-lapse analysis showed significantly diminished cell movements. Conversely, an elongated cell shape with advanced cell spreading and extended actin cytoskeleton accompanied with significantly increased cell mobility were observed when cells attached on aligned nanofibers. Moreover, a clear tendency for higher alkaline phosphatase activity was also found on aligned fibers when ADMSCs were switched to osteogenic induction medium. The strongest accumulation of Alizarin red (AR) and von Kossa stain at 21 days of culture in osteogenic medium were found on 3-D aligned constructs while the rest showed lower and rather undistinguishable activity. Quantitative reverse transcription-polymerase chain reaction analysis for Osteopontin (OSP) and RUNX 2 generally confirmed this trend showing favorable expression of osteogenic genes activity in 3-D environment particularly in aligned configuration. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2065-2074, 2017.

Differentiation of Human Mesenchymal Stem Cells Toward Quality Cartilage Using Fibrinogen-Based Nanofibers.

Mimicking the complex intricacies of the extra cellular matrix including 3D configurations and aligned fibrous structures were traditionally perused for producing cartilage tissue from stem cells. This study shows that human adipose derived mesenchymal stem cells (hADMSCs) establishes significant chondrogenic differentiation and may generate quality cartilage when cultured on 2D and randomly oriented fibrinogen/poly-lactic acid nanofibers compared to 3D sandwich-like environments. The adhering cells show well-developed focal adhesion complexes and actin cytoskeleton arrangements confirming the proper cellular interaction with either random or aligned nanofibers. However, quantitative reverse transcription-polymerase chain reaction analysis for Collagen 2 and Collagen 10 genes expression confirms favorable chondrogenic response of hADMSCs on random nanofibers and shows substantially higher efficacy of their differentiation in 2D configuration versus 3D constructs. These findings introduce a new direction for cartilage tissue engineering through providing a simple platform for the routine generation of transplantable stem cells derived articular cartilage replacement that might improve joint function.

Dynamic Behavior of Vitronectin at the Cell-Material Interface.

Considering that vitronectin (VN) can promote both cell adhesion and matrix degradation, it is likely to play a dual role at the cell-biomaterial interface. In this paper we therefore describe details of the dynamic interplay between matrix adhesion and pericellular proteolysis in endothelial cells adhered to glass model substratum. Initially we show that coating concentration determines protein organization at the surface. When the protein coating density approached saturation (63 ng cm-2), VN spontaneously organized itself in multimeric aggregates at the surface (30-50 nm in diameter). At subsaturation protein density (17 ng cm-2) VN molecules were present predominantly as single entities, indicating that a minimum coating density was required for VN multimerization. By fluorescent visualization of surface-associated VN in different ways, we provide the first evidence of significant proteolytic remodelling of VN by endothelial cells (HUVECs) at the sites of αv integrin clusters. The degree of proteolysis was estimated using a novel approach relying on dequenching of FITC-labeled VN upon proteolytic activity, showing that about one-third of the surface-associated VN was proteolytically altered by adhering HUVECs. In addition, we demonstrate that HUVECs can internalize surface-associated VN and deposit it in a linear pattern along longitudinal actin filaments. Deposited VN was partly colocalized with urokinase receptors. Taken altogether, we elucidate the complex and dynamic behavior of VN during initial cell-biomaterials interactions, the equilibrium if which could have a significant impact on the biocompatibility of any blood contacting implants.

Fibrinogen nanofibers for guiding endothelial cell behavior.

This paper describes the biological consequences of presenting electrospun fibrinogen (FBG) to endothelial cells as a spatially organized nanofibrous matrix. Aligned and randomly oriented FBG nanofibers with an average diameter of less than 200 nm were obtained by electrospinning of native FBG solution. Electrophoretic profiling confirmed that the electrospun FBG resembled the native protein structure, and fluorescent tracing of FITC-labeled FBG showed that electrospun fibers withstood immersion in physiological solutions reasonably well for several days. With respect to cellular interactions, the nanofibrous FBG matrix provided better conditions for initial recognition by human umbilical vein endothelial cells compared to pre-adsorbed FBG on a flat surface. Furthermore, the spatial organization of electrospun FBG fibers presented opportunities for guiding the cellular behavior in a way that is not possible when the protein is presented in another form (e.g. adsorbed or soluble). For example, on aligned FBG fibers, cells rapidly oriented themselves along the fibers, and time-lapse recordings revealed pronounced cellular movements restricted to the fiber direction. In great contrast, on randomly deposited fibers, cells acquired a stellate-like morphology and became locally immobilized by the fibers. We also show that the FBG fiber orientation significantly influenced both the cytoskeleton organization in confluent cell layers and the orientation of the extracellular fibronectin matrix secreted by the cells. In conclusion, this study demonstrates that electrospun FBG nanofibers can be a promising tool for guiding endothelial cell behavior for tissue engineering applications.

Fibronectin activity on substrates with controlled --OH density.

Adhesion of human fibroblast to a family of fibronectin (FN) coated model substrates consisting of copolymers of ethyl acrylate and hydroxyl ethylacrylate in different ratios to obtain a controlled surface density of --OH groups was investigated. Cell adhesion and spreading surprisingly decreased as the fraction of --OH groups on the surface increased. AFM studies of FN conformation revealed formation of a protein network on the more hydrophobic surfaces. The density of this network diminished as the fraction of --OH groups in the sample increased, up to a maximal --OH concentration at which, instead of the network, only FN aggregates were observed. The kinetics of network development was followed at different adsorption times. Immunofluorescence for vinculin revealed the formation of well-developed focal adhesion complexes on the more hydrophobic surface (similar to the control glass), which became less defined as the fraction of --OH groups increased. Thus, the efficiency of cell adhesion is enhanced by the formation of FN networks on the substrate, directly revealing the importance of the adsorbed protein conformation for cell adhesion. However, cell-dependent reorganization of substrate-associated FN, which usually takes place on more hydrophilic substrates (as do at the control glass slides), was not observed in this system, suggesting the increased strength of protein-to-substrate interaction. Instead, the late FN matrix formation--after 3 days of culture--was again better pronounced on the more hydrophobic substrates and decreased as the fraction of --OH groups increase, which is in a good agreement with the results for overall cell morphology and focal adhesion formation.

Biological activity of the substrate-induced fibronectin network: insight into the third dimension through electrospun fibers.

Fibronectin (FN) fibrillogenesis is a cell-mediated process involving integrin activation that results in conformational changes of FN molecules and the organization of actin cytoskeleton. A similar process can be induced by some chemistries in the absence of cells, e.g., poly(ethyl acrylate) (PEA), which enhance FN-FN interactions leading to the formation of a biologically active network. Atomic force microscopy images of single FN molecules, at the early stages of adsorption on plane PEA, allow one to rationalize the process. Further, the role of the spatial organization of the FN network on the cellular response is investigated through its adsorption on electrospun fibers. Randomly oriented and aligned PEA fibers were prepared to mimic the three-dimensional organization of the extracellular matrix. The formation of the FN network on the PEA fibers but not on the supporting coverglass was confirmed. Fibroblasts aligned with oriented fibers, displayed extended morphology, developed linearly organized focal adhesion complexes, and matured actin filaments. Conversely, on random PEA fibers, cells acquired polygonal morphology with altered actin cytoskeleton but well-developed focal adhesions. Late FN matrix formation was also influenced: spatially organized FN matrix fibrils along the oriented PEA fibers and an altered arrangement on random ones.