ABSTRACT
Fibers crystallize and become brittle at high temperatures for a long time, so the surface coating must maintain long-lasting emission performance, which requires superior antioxidant properties of the high-emissivity fillers. To improve the radiation performance of the coating and the tensile strength of the fiber fabric, a double-layer coating with high emissivity was prepared on the surface of flexible aluminum silicate fiber fabric (ASFF) using MoSi2 and SiC as emissive agents. The incorporation of borosilicate glass into the outer coating during high-temperature oxidation of ZrB2 results in superior encapsulation of emitter particles, effectively filling the pores of the coating and significantly reducing the oxidation rate of MoSi2 and SiC. Furthermore, the addition of an intermediate ZrO2 layer enhances the fiber bundle's toughness. The obtained double-coated ASFF exhibits an exceptionally high tensile strength of 57.6 MPa and a high bond strength of 156.2 kPa. After being subjected to a 3 h heating process, the emissivity exhibits a minimal decrease of only 0.032, while still maintaining a high value above 0.9. The thermal insulation composites, consisting of a flexible ASFF matrix and a ZrB2-modified double-layer coating, exhibit significant potential for broad applications in the field of thermal protection.
ABSTRACT
Mullite fiber felt is a promising material that may fulfill the demands of advanced flexible external thermal insulation blankets. However, research on the fabrication and performance of mullite fiber felt with high-temperature resistance and thermal stability is still lacking. In this work, mullite fibers were selected as raw materials for the fabrication of mullite fibrous porous materials with a three-dimensional net structure. Said materials' high-temperature resistance and thermal stability were investigated by assessing the effects of various heat treatment temperatures (1100 °C, 1300 °C, and 1500 °C) on the phase composition, microstructure, and performance of their products. When the heat treatment temperature was below 1300 °C, both the phase compositions and microstructures of products exhibited stability. The compressive rebound rate of the product before and after 1100 °C reached 92.9% and 84.5%, respectively. The backside temperature of the as-prepared products was 361.6 °C when tested at 1500 °C for 4000 s. The as-prepared mullite fibrous porous materials demonstrated excellent high-temperature resistance, thermal stability, thermal insulation performance, and compressive rebound capacity, thereby indicating the great potential of the as-prepared mullite fibrous porous materials in the form of mullite fiber felt within advanced flexible external thermal insulation blankets.
ABSTRACT
The Applications of silica aerogel are limited due to its brittleness and low strength. As a result, it is essential to strengthen and toughen it. Organic nanofibers are one of the preferred reinforcement materials. In this work, we designed and fabricated flexible and compressible nanostructure-assembled aramid nanofiber/silica composites aerogel (ANF/SiO2 aerogel) to improve the mechanical strength and flexibility of silica aerogel without compromising thermal insulation properties. The aramid nanofiber/silica composite aerogels were prepared by immersing the aramid nanofiber wet gel into the silica sol for a certain period of time followed by freeze drying without solvent replacement. The surface modifier 3-aminopropyltriethoxysilane (APTES) was used as a coupling agent to form chemical linkage between the ANF fiber and silica gel. It was observed that APTES can effectively drive the silica sol to infuse into ANF hydrogel, promoting the assembly of silica gel onto the fiber surface and a uniform distribution in the network of ANF. The compressive resilience, thermal stability, and thermal insulation properties of the composite aerogels were evaluated by inducing the silica aerogel into the ANF network to form a protective layer on the fiber and change the pore structure in the ANF network.
ABSTRACT
Ceramic fiber thread is one of the key components in flexible external thermal insulation blankets, and it has been applied in various fields as a flexible ceramic fibrous material with excellent deformability and high-temperature resistance. However, ceramic fiber threads are often subjected to reciprocating friction motion at specific bending angles, making them highly susceptible to abrade and fracture. Enhancing the abrasion resistance performance of ceramic fiber threads under bending conditions is the future trend and remains a significant challenge. Hence, we design and construct a novel polyurethane-modified coating on the ceramic fiber threads to improve their abrasion resistance performance. The effects of the types and concentrations of modifiers on the microstructure, abrasion resistance property, and tensile property of ceramic fiber threads are systematically investigated. The ceramic fiber threads, after modification with hexamethylene diisocyanate waterborne polyurethane (HDI-WPU) with a concentration of 3%, exhibit excellent abrasion resistance properties. The number of friction cycles at fracture of the modified ceramic fiber thread is more than three times, and the tensile strength is more than one and a half times, that of the original ceramic fiber thread, demonstrating the great potential of the HDI-WPU modifier for enhancing the abrasion resistance performance of ceramic fiber threads.
ABSTRACT
High-entropy ceramics exhibit various excellent properties owing to their high configurational entropy, which is caused by multi-principal elements sharing one lattice site. The configurational entropy will further increase significantly if multi-principal elements randomly share two different lattice sites. For this purpose, pseudobrookite phase containing two cationic lattice sites (A and B sites) is selected, and corresponding high-entropy pseudobrookite (M2+ 0.4M3+ 1.2)Ti1.4O5 is synthesized. Herein, the distribution of the 2-valent and 3-valent cations in the A and B sites are analysed in depth. The distance between the A and B sites in the crystal structure models which are constructed by the Rietveld analysis is calculated and defined as distance d. Meanwhile, the atomic column positions in the STEM images are quantified by a model-based mathematical algorithm, and the corresponding distance d are calculated. By comparing the distance d, it is determine that the 2-valent and 3-valent cations are jointly and disorderly distributed in the A and B sites in high-entropy (M2+ 0.4M3+ 1.2)Ti1.4O5. The density functional theory (DFT) simulations also demonstrate that this type of crystal structure is more thermodynamically stable. The higher degree of cationic disorder leads to a higher configurational entropy in high-entropy (M2+ 0.4M3+ 1.2)Ti1.4O5, and endows high-entropy (M2+ 0.4M3+ 1.2)Ti1.4O5 with very low thermal conductivity (1.187-1.249 W m-1 K-1).
ABSTRACT
The paradoxical effects of cobalt in biological processes have caused controversy regarding the application of cobalt-based biomaterials. Cobalt has recently been shown to be a trace element that promotes bone growth. Qingzhuan Dark Tea polysaccharides (TPS) has been shown to be a biomaterial with antioxidant and immunomodulatory effects. In order to develop a novel immunomodulatory biomaterial, we synthesized polysaccharide cobalt complex (TPS-Co) to prevent the paradoxical effects of cobalt while maintaining its beneficial effects, and evaluated its morphology, structure, and antioxidant activity. Fourier-transform infrared spectroscopy, X-ray diffraction and X-ray photoelectron spectroscopy demonstrated that cobalt complexed successfully with TPS. Scanning electron microscopy and atomic mechanical microscopy demonstrated that TPS-Co has a more homogeneous and concentrated morphological distribution compared to TPS. Thermal performance analysis demonstrated that TPS-Co has higher thermal stability. Atomic absorption spectroscopy showed a cobalt content of 3.8%. Ultraviolet spectroscopy indicated that TPS-Co does not contain nucleic acids and proteins. Antioxidant activity assays showed that TPS-Co has better antioxidant activity than TPS in the concentration range of 0.4-2 mg/mL. Proliferation assay of MC3T3-E1 cells demonstrated that TPS-Co has the best cell proliferation effect at a cobalt concentration of 2 ppm. Therefore, TPS-Co may have potential applications in bone regeneration.
ABSTRACT
Porous fiber-based ceramics have been widely applied in various fields because of their excellent thermal insulation property and high thermal stability property. However, designing porous fibrous ceramics with enhanced comprehensive performances, such as low density, low thermal conductivity, and high mechanical properties at both room temperature and high temperature, is still a challenge and the future development trend. Hence, based on the lightweight cuttlefish bone that possesses a "wall-septa" structure with excellent mechanical performance, we design and fabricate a novel porous fibrous ceramic with the unique fiber-based dual structure of lamellas by the directional freeze-casting method and systematically investigate the effects of lamellar components on the microstructure and mechanical performances of the product. For the desired cuttlefish-bone-structure-like lamellar porous fiber-based ceramics (CLPFCs), the porous framework formed by the overlapping of transversely arranged fibers helps to reduce the density and thermal conductivity of the product, and the longitudinally arranged lamellar structure replaces traditional binders and plays an important role in improving the mechanical properties in the direction parallel to the X-Z plane. Compared with traditional porous fibrous materials reported in the literature, the CLPFCs with an Al2O3/SiO2 molar ratio of 1:2 in the lamellar component exhibits prominent comprehensive performances, such as low density, excellent thermal insulation property, and outstanding mechanical performances at both room temperature and high temperature (3.46 MPa at 1300 °C), indicating that the CLPFCs are a promising candidate for applications in high-temperature thermal insulation systems.
ABSTRACT
Iodized oil has an excellent X-ray imaging effect, but it shows poor embolization performance. When used as an embolic agent, it is easily washed off by the blood flow and eliminated from the body. Therefore, it is essential to use iodized oil in combination with solid embolic agents such as gelatin sponge or to perform multiple embolization procedures to achieve the therapeutic effect. In the present study, a poly(N-isopropyl acrylamide)-co-acrylic acid (PNCAA) temperature-sensitive nanogel was synthesized by emulsion polymerization; the nanogel was then emulsified with iodized oil to prepare a thermosensitive iodized oil Pickering gel emulsion (TIPE). The oil-water (O/W) ratio of an O/W emulsion system can reach 4 : 6. When injected into the body, TIPE transforms into a nonflowing coagulated state at physiological temperature; the iodized oil is locked in the emulsion structure, thereby achieving local embolization and continuous imaging effects, which not only retain the X-ray imaging effect of the iodized oil but also improve its embolization effect. Subsequently, we further evaluated renal artery embolization in a normal rabbit renal artery model, and the results showed that TIPE shows a long-term conformal embolization performance and excellent long-term X-ray imaging ability.
Subject(s)
Arteries , Iodized Oil , Animals , Rabbits , Emulsions , Nanogels , X-Rays , WaterABSTRACT
Several vascular embolization materials are commonly used in clinical practice, however, having application defects of varying degrees, such as poor intraoperative imaging and easy recanalization of embolized blood vessels, they are challenging for application during Transcatheter arterial embolization (TAE). Thus, an intraoperative visible vascular embolization material with good embolization effect and biocompatibility can improve transcatheter arterial embolization clinical efficacy to some extent. Our study aimed to synthesize a novel vascular embolization material that can achieve complete embolization of arterial trunks and peripheral vessels, namely poly (N-isopropyl acrylamide)-co-acrylic acid nanogel (NIPAM-co-AA). Iohexol 200 mg/mL was co-assembled with 7 wt% NIPAM-co-AA nanogel to create an intelligent thermosensitive radiopaque nanogel (INCA), which achieves a good intraoperative imaging effect and is convenient for transcatheter arterial bolus injection due to its good fluidity and temperature-sensitive sol-gel phase transition. The normal rabbit kidney embolism model further confirmed that INCA could effectively use Digital subtraction angiography (DSA) to achieve intraoperative imaging, and real-time monitoring of the embolization process could avoid mis-embolization and leakage. Meanwhile, in a 42-day study, INCA demonstrated an excellent embolization effect on the right renal artery of New Zealand white rabbits, with no vascular recanalization and ischemic necrosis and calcification remaining. As a result, this radiopaque thermosensitive nanogel has the potential to be an intelligent thermosensitive medical vascular embolization material, providing dual benefits in TAE intraoperative imaging and long-term postoperative embolization while effectively addressing the shortcomings and challenges of commonly used clinical vascular embolization agents.
ABSTRACT
Fibrous porous materials are one of the most commonly used high-temperature insulation materials because of their high porosity and low thermal conductivity. Due to their wide applications in the aerospace and energy industries, the investigation of high-elastic thermally insulating porous materials has attracted increasing attention. In order to improve the elasticity of fibrous porous materials, quartz fibers with high aspect ratio were used as matrix, sodium hexametaphosphate (SHMP) was selected as dispersant. We innovatively reported that a unique three-dimensional skeleton structure was constructed by adjusting the dispersion of fibers in the slurry, and the lightweight, thermal insulating and elastic SiO2 fibrous porous material was then prepared by the compression molding method. The characterization results of zeta potential and absorbance showed that the addition of SHMP was an effective method to enhance the dispersibility of quartz fibers in the slurry. SiO2 fibrous porous materials with 0.4 wt% SHMP content exhibited an ideal three-dimensional skeleton structure, which endowed the porous material with high porosity (89.39%), low density (0.04751 g/cm3), and low thermal conductivity (0.0356 W·m-1·K-1). The three-dimensional skeleton structure formed by overlapping fibers with high aspect ratios endowed the porous material with excellent elasticity. SiO2 fibrous porous materials with 0.4 wt% SHMP content could undergo large strains of 30% and achieved a resilience ratio of 81.69% under the 30th compression cycle. Moreover, after heat treatment at 800 °C, SiO2 fibrous porous materials also maintained good elasticity with a resilience ratio of more than 80%.
ABSTRACT
We use metal-assisted chemical etching (MCE) method to fabricate nanostructured black silicon on the surface of C-Si. The Si-PIN photoelectronic detector based on this type of black silicon shows excellent device performance with a responsivity of 0.57 A/W at 1060 nm. Silicon nanocone arrays can be created using MCE treatment. These modified surfaces show higher light absorptance in the near-infrared range (800 to 2500 nm) compared to that of C-Si with polished surfaces, and the variations in the absorption spectra of the nanostructured black silicon with different etching processes are obtained. The maximum light absorptance increases significantly up to 95 % in the wavelength range of 400 to 2500 nm. Our recent novel results clearly indicate that nanostructured black silicon made by MCE has potential application in near-infrared photoelectronic detectors.
ABSTRACT
The aim of the present study was to investigate whether magnolol, the essential component of the traditional Chinese medicine, Magnolia officinalis, can pass through liver X receptor α (LXRα), to subsequently play an important role in the lipid metabolic balance. Using a HepG2 human hepatoma cell line, mammalian cellular one-hybridization and mammalian cell transcriptional activation experiments were performed to detect the combination degree of magnolol at different concentrations with LXRα, and assess the transcriptional activity. In addition, using a THP-1 human monocytic cell line, quantitative polymerase chain reaction was performed to assess the effect on the expression levels of downstream genes. Magnolol was shown to dose-dependently combine with LXRα, and subsequently regulate the transcriptional activity of LXRα. In addition, magnolol was found to adjust the expression of associated LXRα downstream genes in the macrophages. In conclusion, magnolol was demonstrated to affect LXRα, which may outline a new molecular mechanism through which magnolol exerts a lipid-lowering function.