ABSTRACT
A Gram-stain-negative, aerobic, rod-shaped and motile strain HL-JVS1T, was isolated from the gastric tract of a juvenile Pacific white shrimp. Molecular phylogenetic analysis based on 16S rRNA gene sequences of strain HL-JVS1T revealed its affiliation with the genus Pleionea, with close relatives including Pleionea mediterranea MOLA115T (97.5%) and Pleionea sediminis S1-5-21T (96.2%). The complete genome of strain HL-JVS1T consisted of a circular 4.4 Mb chromosome and two circular plasmids (6.6 and 35.0 kb) with a G + C content of 43.1%. The average nucleotide identity and digital DNA-DNA hybridization values between strain HL-JVS1T and the type strains of described Pleionea species were 69.7-70.4% and 18.3-18.6%, respectively. Strain HL-JVS1T grew at 10-40 °C (optimum, 30 °C) in the presence of 0.5 - 9.0% (w/v) sea salts (optimum, 2.0 - 2.5%), and at pH range of 5.5 - 10.0 (optimum, pH 6.5). The major fatty acids (> 10%) were summed feature 9 (iso-C17:1 ω9c and/or C16:0 10-methyl) (23.3%), iso-C16:0 (14.5%), iso-C11:0 3-OH (13.8%) and iso-C15:0 (11.0%). The polar lipids were phosphatidylethanolamine, phosphatidylglycerol, diphosphatidylglycerol, an unidentified aminophospholipid, two unidentified aminolipids, and two unidentified lipids. The respiratory quinone was ubiquinone-8. The comprehensive phylogenetic, phylogenomic, phenotypic and chemotaxonomic results showed that strain HL-JVS1T is distinct from other Pleionea species. Hence, we propose strain HL-JVS1T as a novel species belonging to the genus Pleionea, for which the name Pleionea litopenaei sp. nov. is proposed with HL-JVS1T (= KCCM 90514T = JCM 36490T) as the type strain.
Subject(s)
Base Composition , DNA, Bacterial , Fatty Acids , Penaeidae , Phylogeny , RNA, Ribosomal, 16S , Animals , RNA, Ribosomal, 16S/genetics , Fatty Acids/analysis , Fatty Acids/metabolism , DNA, Bacterial/genetics , Bacterial Typing Techniques , Nucleic Acid Hybridization , Sequence Analysis, DNA , Genome, Bacterial , Planococcaceae/genetics , Planococcaceae/isolation & purification , Planococcaceae/classification , Gastrointestinal Tract , Phospholipids/analysisABSTRACT
We present quad-layered reflective structural color filters generating vivid additive primary colors by controlling a mode number in a Fabry-Perot (FP) cavity and an anti-reflective (AR) coating layer, thus accomplishing high spectral contrast which is highly demanded in creating sharp colors. The reflection brightness of fabricated structural color filters is over 78% and a color gamut is comparable to the standard color gamut (sRGB). Higher-order resonant modes are exploited yielding a narrow passband with strong suppression of the reflection at shorter and longer wavelength ranges for a green color, while red and blue colors are produced by employing fundamental resonant modes. Besides, the structural color filters maintain both high brightness and high color purity at oblique incidence angles up to 40° due to a small angle of refraction by a cavity medium with high refractive index. Moreover, a large-scale fabrication is enabled owing to the simplicity of a device structure, where thin film deposition is used. The scheme presented in this work may open the door to a number of applications, such as reflective displays, imaging devices, colored photovoltaics, and decorations.
ABSTRACT
Ni-rich layered oxides have received significant attention as promising cathode materials for Li-ion batteries due to their high reversible capacity. However, intergranular and intragranular cracks form at high state-of-charge (SOC) levels exceeding 4.2 V (vs. Li/Li+), representing a prominent failure mechanism of Ni-rich layered oxides. The nanoscale crack formation at high SOC levels is attributed to a significant volume change resulting from a phase transition between the H2 and H3 phases. Herein, in contrast to the electrochemical crack formation at high SOC levels, another mechanism of chemical crack and pit formation on a nanoscale is directly evidenced in fully lithiated Ni-rich layered oxides (low SOC levels). This mechanism is associated with intergranular stress corrosion cracking, driven by chemical corrosion at elevated temperatures. The nanoscopic chemical corrosion behavior of Ni-rich layered oxides during aging at elevated temperatures is investigated using high-resolution transmission electron microscopy, revealing that microcracks can develop through two distinct mechanisms: electrochemical cycling and chemical corrosion. Notably, chemical corrosion cracks can occur even in a fully discharged state (low SOC levels), whereas electrochemical cracks are observed only at high SOC levels. This finding provides a comprehensive understanding of the complex failure mechanisms of Ni-rich layered oxides and provides an opportunity to improve their electrochemical performance.
ABSTRACT
Considering practical viability, Li-metal battery electrolytes should be formulated by tuning solvent composition similar to electrolyte systems for Li-ion batteries to enable the facile salt-dissociation, ion-conduction, and introduction of sacrificial additives for building stable electrode-electrolyte interfaces. Although 1,2-dimethoxyethane with a high-donor number enables the implementation of ionic compounds as effective interface modifiers, its ubiquitous usage is limited by its low-oxidation durability and high-volatility. Regulation of the solvation structure and construction of well-structured interfacial layers ensure the potential strength of electrolytes in both Li-metal and LiNi0.8Co0.1Mn0.1O2 (NCM811). This study reports the build-up of multilayer solid-electrolyte interphase by utilizing different electron-accepting tendencies of lithium difluoro(bisoxalato) phosphate (LiDFBP), lithium nitrate, and synthetic 1-((trifluoromethyl)sulfonyl)piperidine. Furthermore, a well-structured cathode-electrolyte interface from LiDFBP effectively addresses the issues with NCM811. The developed electrolyte based on a framework of highly- and weakly-solvating solvents with interface modifiers enables the operation of Li|NCM811 cells with a high areal capacity cathode (4.3 mAh cm-2) at 4.4 V versus Li/Li+.
ABSTRACT
Dielectric scatterers where Mie resonances can be excited in both electric and magnetic modes have emerged as a promising candidate for efficient light trapping (LT) in thin-film solar cells. We present that light absorption in organic solar cells (OSCs) can be significantly enhanced by a front-sided incorporation of a core-shell nanostructure consisting of a high-refractive-index dielectric nanosphere array conformally coated with a low-refractive-index dielectric layer. Strong forward light scattering of the all-dielectric LT structure enables the absorption in an organic semiconductor to be remarkably boosted over a broad range of wavelengths, which is attributed to interference of a simultaneous excitation of the electric and magnetic dipole resonant modes. The OSC with the LT structure shows the short-circuit current density (Jsc) of 28.23 mA/cm2, which is 10% higher than that of a flat OSC. We also explore how the LT structure affects scattering cross-sections, spectral multipole resonances, and far-field radiation patterns. The approach described in this work could offer the possibility for the improvement of characteristic performances of various applications, such as other thin-film solar cells, photodiodes, light-emitting diodes, and absorbers.
ABSTRACT
Understanding the ultrafast excitation and transport dynamics of plasmon-driven hot carriers is critical to the development of optoelectronics, photochemistry, and solar-energy harvesting. However, the ultrashort time and length scales associated with the behavior of these highly out-of-equilibrium carriers have impaired experimental verification of ab initio quantum theories. Here, we present an approach to studying plasmonic hot-carrier dynamics that analyzes the temporal waveform of coherent terahertz bursts radiated by photo-ejected hot carriers from designer nano-antennas with a broken symmetry. For ballistic carriers ejected from gold antennas, we find an ~11-femtosecond timescale composed of the plasmon lifetime and ballistic transport time. Polarization- and phase-sensitive detection of terahertz fields further grant direct access to their ballistic transport trajectory. Our approach opens explorations of ultrafast carrier dynamics in optically excited nanostructures.
ABSTRACT
Argyrodite-type Li6 PS5 Cl (LPSCl) has attracted much attention as a solid electrolyte for all-solid-state batteries (ASSBs) because of its high ionic conductivity and good mechanical flexibility. LPSCl, however, has challenges of translating research into practical applications, such as irreversible electrochemical degradation at the interface between LPSCl and cathode materials. Even for Li-ion batteries (LIBs), liquid electrolytes have the same issue as electrolyte decomposition due to interfacial instability. Nonetheless, current LIBs are successfully commercialized because functional electrolyte additives give rise to the formation of stable cathode-electrolyte interphase (CEI) and solid-electrolyte interphase (SEI) layers, leading to supplementing the interfacial stability between electrolyte and electrode. Herein, inspired by the role of electrolyte additives for LIBs, trimethylsilyl compounds are introduced as solid electrolyte additives for improving the interfacial stability between sulfide-based solid electrolytes and cathode materials. 2-(Trimethylsilyl)ethanethiol (TMS-SH), a solid electrolyte additive, is oxidatively decomposed during charge, forming a stable CEI layer. As a result, the CEI layer derived from TMS-SH suppresses the interfacial degradation between LPSCl and LiCoO2 , thereby leading to the excellent electrochemical performance of Li | LPSCl | LiCoO2 , such as superior cycle life over 2000 cycles (85.0% of capacity retention after 2000 cycles).
ABSTRACT
Monitoring and diagnosing the battery status in real-time are of utmost importance for clarifying failure mechanism, improving battery performance, and ensuring safety, particularly under fast charging conditions. Recently, advanced operando techniques have been developed to observe changes in the microstructures of lithium deposits using laboratory-scale cell designs, focusing on understanding the nature of Li metal electrodes. However, the macroscopic spatial inhomogeneity of lithium electroplating/stripping in the prototype pressurized pouch cells has not been measured in real-time under practical conditions. Herein, a new noninvasive operando technique, spatial pressure mapping analysis, is introduced to macroscopically and quantitatively measure spatial pressure changes in a pressurized pouch cell during cycling. Moreover, dynamic spatial changes in the macroscopic morphology of the lithium metal electrode are theoretically visualized by combining operando pressure mapping data with mechanical analyses of cell components. Additionally, under fast charging conditions, the direct correlation between abrupt capacity fading and sudden increases in spatial pressure distribution inhomogeneity is demonstrated through comparative analysis of pouch cells under various external pressures, electrolyte species, and electrolyte weight to cell capacity (e/c) ratios. This operando technique provides insights for assessing the current battery status and understanding the complex origin of cell degradation behavior in pressurized pouch cells.
ABSTRACT
Home appliances are considered to account for a large portion of smart homes' energy consumption. This is due to the abundant use of IoT devices. Various home appliances, such as heaters, dishwashers, and vacuum cleaners, are used every day. It is thought that proper control of these home appliances can reduce significant amounts of energy use. For this purpose, optimization techniques focusing mainly on energy reduction are used. Current optimization techniques somewhat reduce energy use but overlook user convenience, which was the main goal of introducing home appliances. Therefore, there is a need for an optimization method that effectively addresses the trade-off between energy saving and user convenience. Current optimization techniques should include weather metrics other than temperature and humidity to effectively optimize the energy cost of controlling the desired indoor setting of a smart home for the user. This research work involves an optimization technique that addresses the trade-off between energy saving and user convenience, including the use of air pressure, dew point, and wind speed. To test the optimization, a hybrid approach utilizing GWO and PSO was modeled. This work involved enabling proactive energy optimization using appliance energy prediction. An LSTM model was designed to test the appliances' energy predictions. Through predictions and optimized control, smart home appliances could be proactively and effectively controlled. First, we evaluated the RMSE score of the predictive model and found that the proposed model results in low RMSE values. Second, we conducted several simulations and found the proposed optimization results to provide energy cost savings used in appliance control to regulate the desired indoor setting of the smart home. Energy cost reduction goals using the optimization strategies were evaluated for seasonal and monthly patterns of data for result verification. Hence, the proposed work is considered a better candidate solution for proactively optimizing the energy of smart homes.
ABSTRACT
An enhancement of the local electric field at the metal/dielectric interface of hybrid materials due to the localized surface plasmon resonance (LSPR) phenomenon plays a particularly important role in versatile research fields resulting in a distinct modification of the electrical, as well as optical, properties of the hybrid material. In this paper, we succeeded in visually confirming the LSPR phenomenon in the crystalline tris(8-hydroxyquinoline) aluminum (Alq3) micro-rod (MR) hybridized with silver (Ag) nanowire (NW) in the form of photoluminescence (PL) characteristics. Crystalline Alq3 MRs were prepared by a self-assembly method under the mixed solution of protic and aprotic polar solvents, which could be easily applied to fabricate hybrid Alq3/Ag structures. The hybridization between the crystalline Alq3 MRs and Ag NWs was confirmed by the component analysis of the selected area electronic diffraction attached to high-resolution transmission electron microscope. Nanoscale and solid state PL experiments on the hybrid Alq3/Ag structures using a lab-made laser confocal microscope exhibited a distinct enhancement of the PL intensity (approximately 26-fold), which also supported the LSPR effects between crystalline Alq3 MRs and Ag NWs.
ABSTRACT
A Gram-stain-negative, aerobic, rod-shaped bacterial strain, designated HL-LV01T, was isolated from the intestinal tract content of the Pacific white shrimp Litopenaeus vannamei. The 16S rRNA gene sequence of strain HL-LV01T showed that the strain was clearly a member of the genus Maribacter. According to the phylogenetic analyses, strain HL-LV01T was most closely related to the species Maribacter flavus KCTC 42508T with 98.2â% sequence similarity. The average nucleotide identity and digital DNA-DNA hybridization values between strain HL-LV01T and M. flavus KCTC 42508T were 80.6â% and 23.0â%, respectively, indicating different genomic species in the genus Maribacter. Strain HL-LV01T showed optimal growth at 35 °C, pH 7.0, and 2.5â% (w/v) sea salts. The major cellular fatty acids were iso-C15â:â0 (32.5â%), iso-C17â:â0 3-OH (22.3â%), and iso-C15â:â1 G (15.5â%). The major respiratory quinone was menaquinone-6. The polar lipids consisted of phosphatidylethanolamine, three unidentified aminolipids, and seven unidentified lipids. The genomic DNA G+C content of the strain was 39.8 mol%. The comprehensive phylogenetic, genomic, phenotypic, and chemotaxonomic results indicate that strain HL-LV01T is distinct from validly published species of the genus Maribacter. Hence, we propose strain HL-LV01T as a novel species belonging to the genus Maribacter, for which the name Maribacter litopenaei sp. nov. is proposed. The type strain is HL-LV01T (= KCCM 90498T = JCM 35709T).
Subject(s)
Fatty Acids , Flavobacteriaceae , Fatty Acids/chemistry , Phylogeny , RNA, Ribosomal, 16S/genetics , Sequence Analysis, DNA , DNA, Bacterial/genetics , Base Composition , Bacterial Typing Techniques , Vitamin K 2/chemistryABSTRACT
Ultrafast optical switching in plasmonic platforms relies on the third-order Kerr nonlinearity, which is tightly linked to the dynamics of hot carriers in nanostructured metals. Although extensively utilized, a fundamental understanding on the dependence of the switching dynamics upon optical resonances has often been overlooked. Here, all-optical control of resonance bands in a hybrid photonic-plasmonic crystal is employed as an empowering technique for probing the resonance-dependent switching dynamics upon hot carrier formation. Differential optical transmission measurements reveal an enhanced switching performance near the anti-crossing point arising from strong coupling between local and nonlocal resonance modes. Furthermore, entangled with hot-carrier dynamics, the nonlinear correspondence between optical resonances and refractive index change results in tailorable dispersion of recovery speeds which can notably deviate from the characteristic lifetime of hot carriers. The comprehensive understanding provides new protocols for optically characterizing hot-carrier dynamics and optimizing resonance-based all-optical switches for operations across the visible spectrum.
ABSTRACT
The activity of lithium ions in electrolytes depends on their solvation structures. However, the understanding of changes in Li+ activity is still elusive in terms of interactions between lithium ions and solvent molecules. Herein, the chelating effect of lithium ion by forming [Li(15C5)]+ gives rise to a decrease in Li+ activity, leading to the negative potential shift of Li metal anode. Moreover, weakly solvating lithium ions in ionic liquids, such as [Li(TFSI)2 ]- (TFSI = bis(trifluoromethanesulfonyl)imide), increase in Li+ activity, resulting in the positive potential shift of LiFePO4 cathode. This allows the development of innovative high energy density Li metal batteries, such as 3.8 V class Li | LiFePO4 cells, along with introducing stable biphasic electrolytes. In addition, correlation between Li+ activity, cell potential shift, and Li+ solvation structure is investigated by comparing solvated Li+ ions with carbonate solvents, chelated Li+ ions with cyclic and linear ethers, and weakly solvating Li+ ions in ionic liquids. These findings elucidate a broader understanding of the complex origin of Li+ activity and provide an opportunity to achieve high energy density lithium metal batteries.
ABSTRACT
Various Fe-based layered oxide materials have received attention as promising cathode materials for sodium ion batteries because of their low cost and high specific capacity. Only a few P3-type Fe-based oxide materials, however, have been examined as cathodes because the synthesis of highly crystalline P3-type Fe-based oxides is not facile. For this reason, the structural merits of the P3 structure are not yet fully understood. Herein, highly crystalline P3-type Na0.67[Li0.1(Fe0.5Mn0.5)0.9]O2 heated at 900 °C is introduced to improve the electrochemical performance of Fe-based layered oxides. The structures, reaction mechanisms, and electrochemical performances of P3 Na0.67[Li0.1(Fe0.5Mn0.5)0.9]O2, P2 Na0.57[Li0.1(Fe0.5Mn0.5)0.9]O2, and P2 Na0.67[Fe0.5Mn0.5]O2 are compared to demonstrate the roles of Li+ doping in the improved electrochemical performance of P3 Na0.67[Li0.1(Fe0.5Mn0.5)0.9]O2, such as stable capacity retention over 100 cycles. P3 Na0.67[Li0.1(Fe0.5Mn0.5)0.9]O2 significantly suppresses the migration of Fe3+ ions to tetrahedral sites in the Na layer during cycling because the cation disorder of Li+ is more favorable than that of Fe3+. As a result, P3 Na0.67[Li0.1(Fe0.5Mn0.5)0.9]O2 shows better cycle performance than P2 Na0.67[Fe0.5Mn0.5]O2. P3 Na0.67[Li0.1(Fe0.5Mn0.5)0.9]O2 also exhibits an improved rate performance compared to P2 Na0.67[Fe0.5Mn0.5]O2. This finding provides fundamental insights to improve the electrochemical performance of layered oxide cathode materials for sodium ion batteries.
ABSTRACT
In this paper we demonstrate strain-dependent photoacoustic (PA) characteristics of free-standing nanocomposite transmitters that are made of carbon nanotubes (CNT) and candle soot nanoparticles (CSNP) with an elastomeric polymer matrix. We analyzed and compared PA output performances of these transmitters which are prepared first on glass substrates and then in a delaminated free-standing form for strain-dependent characterization. This confirms that the nanocomposite transmitters with lower concentration of nanoparticles exhibit more flexible and stretchable property in terms of Young's modulus in a range of 4.08-10.57 kPa. Then, a dynamic endurance test was performed revealing that both types of transmitters are reliable with pressure amplitude variation as low as 8-15% over 100-800 stretching cycles for a strain level of 5-28% with dynamic endurance in range of 0.28-2.8%. Then, after 2000 cycles, the transmitters showed pressure amplitude variation of 6-29% (dynamic endurance range of 0.21-1.03%) at a fixed strain level of 28%. This suggests that the free-standing nanocomposite transmitters can be used as a strain sensor under a variety of environments providing robustness under repeated stretching cycles.
Subject(s)
Nanocomposites , Nanoparticles , Nanotubes, Carbon , Wearable Electronic Devices , Elastic Modulus , Nanocomposites/chemistry , Nanotubes, Carbon/chemistryABSTRACT
We experimentally demonstrate the direct visualization of ultraviolet (UV) light using flexible polymer composite films consisting of crystalline organic tris-(8-hydroxyquinoline) aluminum (Alq3) micro-rods and polydimethylsiloxane (PDMS). The representative organic mono-molecule Alq3, which is a core material of organic light-emitting diodes, was used to detect light in the invisible UV region and visualize photoluminescence (PL). Alq3 shows absorption in the UV region and light-emitting characteristics in the green region, making it an optimal material for UV visualization because of its large Stokes transition. Crystalline Alq3 micro-rods were fabricated in a deionized water solution through a sequential process of reprecipitation and self-assembly. Highly bright photoluminescence was observed on the highly crystalline Alq3 micro-rods under UV light excitation, indicating that the crystalline structures of Alq3 molecules affect the visible emission decay of excitons. The Alq3 micro-rods were manufactured as flexible polymer composite films using a PDMS solution to observe UV photodetector characteristics according to UV intensity, and it was confirmed that the intensity of the fine UV light reaching the earth's surface can be visualized by making use of this UV photodetector.
ABSTRACT
We present an improved color purity of additive transmissive structural color filters by controlling a resonance order and by inserting a highly absorbing material. The proposed structure consists of a single metal sandwiched by two transparent dielectric media serving as a cavity to minimize the ohmic loss in the metal mirrors, which is distinctly different from a conventional Fabry-Perot (FP) cavity that is in general designed to have two metal mirrors. Low reflections at an air-dielectric interface cause a quality-factor of a resonance to be reduced, causing a degraded color purity, which can be improved by employing a 1st order resonance that exhibits a narrower bandwidth than a fundamental FP resonant mode (0th order). For a red color with the improved purity, introducing an ultrathin absorbing layer in the middle of a top cavity enables the 1st resonance to be trivially influenced while selectively suppressing a 2nd order resonance appearing at the shorter wavelength region. Moreover, angle-insensitive performances up to 60° are attained by utilizing a cavity material with high index of refraction. Besides, the fabrication of the structural coloring devices involves a few deposition steps, thus rendering the approach suitable for applications over the large area. The described concept could be applied to diverse applications, such as colored solar panels, sensors, imaging devices, and decorations.
ABSTRACT
The conventional process for developing an optimal design for nonlinear optical responses is based on a trial-and-error approach that is largely inefficient and does not necessarily lead to an ideal result. Deep learning can automate this process and widen the realm of nonlinear geometries and devices. This research illustrates a deep learning framework used to create an optimal plasmonic design for a nonlinear metamaterial. The algorithm produces a plasmonic pattern that can maximize the second-order nonlinear effect of a nonlinear metamaterial. A nanolaminate metamaterial is used as a nonlinear material, and plasmonic patterns are fabricated on the prepared nanolaminate to demonstrate the validity and efficacy of the deep learning algorithm. The optimal pattern produced yielded second-harmonic generation from the nanolaminate with normal incident fundamental light. The deep learning architecture applied in this research can be expanded to other optical responses and light-matter interaction processes.
ABSTRACT
Energy consumption is increasing daily, and with that comes a continuous increase in energy costs. Predicting future energy consumption and building an effective energy management system for smart homes has become essential for many industrialists to solve the problem of energy wastage. Machine learning has shown significant outcomes in the field of energy management systems. This paper presents a comprehensive predictive-learning based framework for smart home energy management systems. We propose five modules: classification, prediction, optimization, scheduling, and controllers. In the classification module, we classify the category of users and appliances by using k-means clustering and support vector machine based classification. We predict the future energy consumption and energy cost for each user category using long-term memory in the prediction module. We define objective functions for optimization and use grey wolf optimization and particle swarm optimization for scheduling appliances. For each case, we give priority to user preferences and indoor and outdoor environmental conditions. We define control rules to control the usage of appliances according to the schedule while prioritizing user preferences and minimizing energy consumption and cost. We perform experiments to evaluate the performance of our proposed methodology, and the results show that our proposed approach significantly reduces energy cost while providing an optimized solution for energy consumption that prioritizes user preferences and considers both indoor and outdoor environmental factors.
Subject(s)
Algorithms , Machine LearningABSTRACT
Arrays of high-index dielectric nanoparticles supporting both electrical and magnetic resonances have gained increasing attention for their excellent light-trapping (LT) effects, thus greatly improving the performance of ultrathin solar cells. This work explores front-located, high-index dielectric subwavelength nanosphere arrays as an efficient and broadband LT structure patterned on top of an ultrathin perovskite solar cell (PSC) for a greatly enhanced absorption. Combined strong light scattering and anti-reflection properties achieved by optimized geometrical parameters of the LT structure lead to a broadband absorption enhancement in the ultrathin thickness of a photoactive layer (100 nm) yielding the short-circuit current density (Jsc) of 18.7 mA/cm2, which is 31.7% higher than that of a planar counterpart. Moreover, effects of the LT structure on far-field radiation patterns, scattering cross-sections, multipoles' contributions, and asymmetry parameters along with the incidence angle and polarization dependence are investigated. The present strategy could be applied to diverse applications, such as other ultrathin or semitransparent solar cells, absorbers and photodetectors.