Engineering in situ growth of Au nanoclusters on hydrophilic paper fibres for fluorescence calligraphy-based chemical logic gates and information encryption.

Gold nanoclusters (AuNCs) are a type of rising-star fluorescence nanomaterials, but their properties and applications are hindered by the multi-step synthesis and purification routes, as well as the lack of desired supporting substrates. To enhance optical performance and working efficiency, the synthesis and applications of AuNCs are suggested to be merged with emerging substrates. Herein, glutathione-modified hydrophilic rice papers are incubated in chloroauric acid aqueous solutions, and the oxidation-reduction reaction between glutathione and Au ions enables the in situ formation of fluorescent AuNCs on the solid fibres of rice papers. The in situ growth of fluorescent AuNCs on rice papers resulted in eye-catching fluorescence tracks, similar to traditional Chinese conventional calligraphy; thus, this fluoresence calligraphy is defined in this work. The entire process, including synthesis and signal responses, is extremely simple, rapid, and repeatable. Moreover, the diversity of additive chemical reagents in the studied rice papers resulted in responsive fluorescence calligraphy, and the as-synthesized AuNC materials exhibited high reliability and optical stability. Significantly, with the integration of synchronous formation and application of Au nanoclusters on hydrophilic paper substrates, high-performance logical gates and information encryption systems were constructed, remarkably facilitating the progress of molecular sensing and important information transmission.

Binary ruthenium dioxide and nickel oxide ultrafine particles loaded on carbon nanotubes for high-stability oxygen evolution reaction at high current densities.

RuO2 is an efficient electrocatalyst for the oxygen evolution reaction (OER). However, during the OER process, RuO2 is prone to oxidation into Rux+ (x > 4), leading to its dissolution in the electrolyte and resulting in poor stability of RuO2. Here, we report a bicomponent electrocatalyst, NiO and RuO2 co-loaded on carbon nanotubes (RuO2/NiO/CNT). The results demonstrate that the introduction of NiO suppresses the over-oxidation of RuO2 during the OER process, not only inheriting the excellent catalytic performance of RuO2, but also significantly enhancing the stability of the catalyst for OER at high current densities. In contrast to RuO2/CNT, RuO2/NiO/CNT shows no significant change in activity after 150 h of OER at a current density of 100 mA cm-2. Density functional theory (DFT) calculations indicate that NiO transfers a large number of electrons to RuO2, thereby reducing the oxidation state of Ru. In conclusion, this study provides a detailed analysis of the phenomenon where low-valent metal oxides have the ability to enhance the stability of RuO2 catalysts.

A novel structurally modified isophorone fluorescent probe for H2S detection.

Hydrogen sulfide (H2S) has a comprehensive contribution to the normal operation and stability of organisms and is also present in environmental water samples and food deterioration. Thus, it is exceedingly promising and significant to develop a highly sensitive detection technique for tracing H2S. Inspired by this, we designed and synthesized a new fluorescent probe 2-[3-[2-[3-bromo-4-(2,4- dinitrobenzenesulfonate)] ethenyl]-5,5-dimethyl-2-cyclohexen-1-ylidene]propanedinitrile (SP-Br) for hydrosulfide ion detection by introducing bromine atom. Compared with reported H2S probes based on the same fluorescent parent, SP-Br has longer fluorescence emission (λem = 670 nm), shorter response time (3 min), lower detection limit (149 nM), and wider detection range (0-30 nM). SP-Br can emit weak yellow fluorescence, and the emission intensity at 670 nm is considerably enhanced in the presence of hydrosulfide ions. The identification mechanism of hydrosulfide ion by SP-Br was verified by high-resolution mass spectrometry, fluorescence, and UV-vis absorption spectroscopy. In addition, SP-Br has been successfully applied to the monitoring of actual water samples and beer samples and has certain development prospects and value in the fields of environmental pollution and food quality analysis.

In-situ revealed inhibition of W2C to excessive oxidation of CoOOH for high-efficiency alkaline overall water splitting.

The design of low-cost, efficient, and stable multifunctional basic catalysts to replace the high-cost noble metal catalysts remains a challenge. In this work, we report a dual-component Co-W2C catalytic system which achieves excellent properties of hydrogen evolution reaction (HER, η10 = 63 mV), oxygen evolution reaction (OER, η10 = 259 mV) and overall water splitting (η10 = 1.53 V) by adjusting the interfacial electronic structure of the material. Further density functional theory (DFT) calculations indicate that the efficient electronic modulation at the W2C/Co interface leads to the generation of favorable hydroxyl and hydrogen species energetics on the hybrid surface. The results of the in-situ Raman spectra show that W2C can suppress the excessive oxidation of the active site during the OER process, and the existence of core-shell structure also protects the W2C substrate. The stable and efficient catalytic performance of Co-W2C is attributed to the common advantages of structural and interface manipulation.

Synergistic effects of interface and phase engineering on telluride toward alkaline/neutral hydrogen evolution reaction in freshwater/seawater.

The development of efficient, stable, and versatile hydrogen evolution electrocatalysts is of great meaning, but still faces challenging. Interface engineering and phase engineering have been immensely applied in the field of hydrogen evolution reaction (HER) because of their unique physicochemical properties. However, they are typically used separately, which limits their effectiveness. Herein, we propose an interface-engineered CoMo/CoTe electrocatalyst, consisting of an amorphous CoMo (a-CoMo) layer-encapsulated crystalline CoTe array, achieving the profound optimization of catalytic performance. The experimental results and density functional theory calculations show that the d-band center of the catalyst shifts further upward in contrast with its crystalline-crystalline counterpart, optimizing the electronic structure and the intermediate adsorption, thereby reducing the kinetic barrier of HER. The a-CoMo/CoTe with superhydrophilic/superaerophobic features shows excellent catalytic performance in alkaline, neutral, and simulated seawater environments.

Cysteine-Induced Chirality Evolution of Molybdenum Disulfide Nanodots from a Bottom-Up Strategy.

The transfer of chirality from molecules to synthesized nanomaterials has recently attracted significant attention. Although most studies have focused on graphene and plasmonic metal nanostructures, layered transition metal dichalcogenides (TMDs), particularly MoS2, have recently garnered considerable attention due to their semiconducting and electrocatalytic characteristics. Herein, we report a new approach for the synthesis of chiral molybdenum sulfide nanomaterials based on a bottom-up synthesis method in the presence of chiral cysteine enantiomers. In the synthesis process, molybdenum trioxide and sodium hydrosulfide serve as molybdenum and sulfur sources, respectively. In addition, ascorbic acid acts as a reducing agent, resulting in the formation of zero-dimensional MoS2 nanodots. Moreover, the addition of cysteine enantiomers to the growth solutions contributes to the chirality evolution of the MoS2 nanostructures. The chirality is attributed to the cysteine enantiomer-induced preferential folding of the MoS2 planes. The growth mechanism and chiral structure of the nanomaterials are confirmed through a series of characterization techniques. This work combines chirality with the bottom-up synthesis of MoS2 nanodots, thereby expanding the synthetic methods for chiral nanomaterials. This simple synthesis approach provides new insights for the construction of other chiral TMD nanomaterials with emerging structures and properties. More significantly, the as-formed MoS2 nanodots exhibited highly defect-rich structures and chiroptical performance, thereby inspiring a high potential for emerging optical and electronic applications.

Electrophoretic Microplate Protein Identification Based on Gold Staining of Molybdenum Disulfide Hydrogels.

Numerous high-performance nanotechnologies have been developed, but their practical applications are largely restricted by the nanomaterials' low stabilities and high operation complexity in aqueous substrates. Herein, we develop a simple and high-reliability hydrogel-based nanotechnology based on the in situ formation of Au nanoparticles in molybdenum disulfide (MoS2)-doped agarose (MoS2/AG) hydrogels for electrophoresis-integrated microplate protein recognition. After the incubation of MoS2/AG hydrogels in HAuCl4 solutions, MoS2 nanosheets spontaneously reduce Au ions, and the hydrogels are remarkably stained with the color of as-synthetic plasmonic Au hybrid nanomaterials (Au staining). Proteins can precisely mediate the morphologies and optical properties of Au/MoS2 heterostructures in the hydrogels. Consequently, Au staining-based protein recognition is exhibited, and hydrogels ensure the comparable stabilities and sensitivities of protein analysis. In comparison to the fluorescence imaging and dye staining, enhanced sensitivity and recognition performances of proteins are implemented by Au staining. In Au staining, exfoliated MoS2 semiconductors directly guide the oriented growth of plasmonic Au nanostructures in the presence of formaldehyde, showing environment-friendly features. The Au-stained hydrogels merge the synthesis and recognition applications of plasmonic Au nanomaterials. Significantly, the one-step incubation of the electrophoretic hydrogels leads to high simplicity of operation, largely challenging those multiple-step Ag staining routes which were performed with high complexity and formaldehyde toxicity. Due to its toxic-free, simple, and sensitive merits, the Au staining integrated with electrophoresis-based separation and microplate-based high-throughput measurements exhibits highly promising and improved practicality of those developing nanotechnologies and largely facilitates in-depth understanding of biological information.

Efficient turn-on fluorescent probe cooperated by cascade response for disclosing the fluctuation of cysteine in cells.

BACKGROUND: The research on cysteine (Cys) determination is deemed as a hot topic, since it has been reported to be connected with various physiological processes and disease prediction. However, existing Cys-responding probes may expose some defects such as long reaction time, disappointing photostability, and suboptimal sensitivity. Under such a circumstance, our team has proposed an efficient fluorescent probe with novel sensing mechanism to perfectly cope with the above-mentioned drawbacks. RESULTS: A novel cascade reaction-based probe 9-(2,2-dicyanovinyl)-2,3,6,7-tetrahydro-1H,5H-pyrido[3,2,1-ij]quinolin-8-yl acrylate (DPQA) has been synthesized for the first time. Undergoing addition-cleavage and cyclization-rearrangement processes, DPQA reacts with Cys to generate an iminocoumarin product with relucent green fluorescence, namely 11-imino-2,3,6,7-tetrahydro-1H,5H,11H-pyrano[2,3-f]pyrido[3,2,1-ij]quinoline-10-carbonitrile (IMC-J), and the relative fluorescence quantum yield (Φf) soars from 0.007 to 0.793. Utilizing such a mechanism, DPQA shows a superb turn-on signal (172-fold), low detection limit (4.1 nM), and wide detection range (5-6000 nM) toward Cys detection. Encouraged by the admirable sensing performance of DPQA, bioimaging of endogenous Cys has been attempted in HeLa cells with satisfactory results. Moreover, cell model of H2O2-induced oxidative stress has been established and the Cys fluctuation during this process has been inspected, elucidating how living cells confront with the eruption of reactive oxygen species (ROS) storm. SIGNIFICANCE: The probe DPQA with such an intriguing cascade responding process for Cys detection has been endowed with many merits, such as fast reaction and superior sensitivity, conducive to improving responsiveness and rendering it more suitable for further applications. Thereby, we expect that the DPQA would be an efficient tool for detecting Cys fluctuation in living cells of different physiological processes.

Taming Janus-Faced Quinoline-Derived Fluorescent Probes for Dual-Channel Distinguishable Visualization of HSO3- and HClO in Dried Foods and Living Cells.

With the booming development of food manufacturing, developing ideal analytical tools to precisely quantify food additives is highly sought after in the food science field. Herein, a new series of quinoline-derived multifunctional fluorescent probes has been synthesized. Bearing double reactive sites, these compounds display fluorescence response toward both bisulfite (HSO3-) and hypochlorous acid (HClO). Among these compact structures, compound ethyl-2-cyano-3-(6-(methylthio)quinolin-2-yl)acrylate (QTE) was screened out. Probe QTE not only shows ratiometric variation toward HSO3- with little cross talk but also performs turn-off signal toward HClO. In addition, probe QTE has been utilized for bioimaging of HClO in living cells. Furthermore, the HSO3- content in dried food samples has been appraised by QTE with satisfactory results. Meanwhile, relying on the apparent chromaticity change, a flexible dark-box device has been elaborated for chromatic analysis, promoting visualization of HSO3- in the field.

Mediating sequential turn-on and turn-off fluorescence signals for discriminative detection of Ag+ and Hg2+ via readily available CdSe quantum dots.

Realizing the accurate recognition and quantification of heavy metal ions is pivotal but challenging in the environmental, biological, and physiological science fields. In this work, orange fluorescence emitting quantum dots (OQDs) have been facilely synthesized by one-step method. The participation of silver ion (Ag+) can evoke the unique aggregation-induced emission (AIE) of OQDs, resulting in prominent fluorescence enhancement, which is scarcely reported previously. Moreover, the Ag+-triggered turn-on fluorescence can be continuously shut down by mercury ion (Hg2+). This intriguing sequential fluorescence variation exhibits great sensing potency for discrimination and quantification of Ag+ and Hg2+. Meanwhile, our OQDs also exhibit good selectivity, sensitivity, and rapid response toward Ag+ and Hg2+ detection. Due to their high performance, OQDs have been applied to the determination of Ag+ and Hg2+ levels in daily necessities and water samples with satisfactory results. Moreover, a portable smartphone-assisted sensing platform based on chromatic change has been constructed, facilitating the real-time and naked-eye visualization in the resource-confined scene. We anticipate that the discovery of these OQDs would be advantageous for exploring novel QDs materials for fluorescence detection.

Construction of a novel flavonol fluorescent probe for copper (II) ion detection and its application in actual samples.

Copper is an essential trace element in the human body, and its level is directly related to many diseases. While the source of copper in human body is mainly intake from food, then the detection of copper ions (Cu2+) in food becomes crucial. Here, we synthesized a novel probe (E)-3-hydroxy-2-styryl-4H-benzo[h]chromen-4-one (NSHF) and explored the binding ability of NSHF for Cu2+ using nuclear magnetic resonance hydrogen spectroscopy (1H NMR), high-resolution mass spectrometry (HRMS), Job's plot method and density functional theory (DFT). NSHF shows the advantages of fast response time, good selectivity and high sensitivity for Cu2+. The fluorescence intensity ratio (F/F0) of NSHF shows a good linear relationship with the concentration of Cu2+ and the detection limit is 0.061 µM. NSHF was successfully applied to the detection of Cu2+ in real samples. In addition, a simple and convenient Cu2+ detection platform was constructed by combining NSHF with a smartphone and a UV lamp, which can realize the rapid detection of Cu2+. This work provides an effective tool for the real-time detection of Cu2+.

A dual-mode sensing platform coupling two-signal ratiometric and colorimetric methods for detecting Au3+ based on surface state-regulated carbon nanodot.

The considerable risk posed by Au3+ residues to the environment and human health has sparked interest in researching Au3+ monitoring techniques. The detection results in the usual ratio mode are more reliable. In this work, we develop a dual-mode strategy based on reducing carbon dots coupling with two-signal ratiometric and colorimetric methods for high-sensitivity, good-selectivity, and wide-range detection of Au3+. Cyan carbon dots (C-CDs) were synthesized by a simple and efficient one-step hydrothermal method. The C-CDs with rich amino group used m-phenylenediamine as carbon source, which made it have the potential as a reducing agent. After the addition of Au3+, Au3+ was reduced to Au0, generating stable gold nanoparticles (AuNPs). The fluorescence signal (F490) of C-CDs decreased. At the same time, the large size of AuNPs enhances the second-order scattering signal (S770) and produces the UV-visible absorption peak of AuNPs. Therefore, the dual-mode sensing strategy combining S770/F490 ratiometric and colorimetric detection of Au3+ is realized with high accuracy and sensitivity. Au3+ was determined in real samples and a good recovery was obtained. The dual-mode method has good performance and practicality, so it shows great potential for environment testing in a simple and reliable way.

Myricetin-based fluorescence probes with AIE and ESIPT properties for detection of hydrazine in the environment and fingerprinting.

BACKGROUND: Hydrazine (N2H4) is a highly toxic and versatile chemical raw material, which poses a serious threat to the environment and human health when used in large quantities. However, the traditional methods for the detection of N2H4 have the disadvantages of time-consuming, complicated operation and expensive instruments. In contrast, fluorescence probes have many advantages, such as simple operation, high sensitivity, good selectivity, and fast response time. Therefore, there is an urgent need for a fluorescence probe that can rapidly and accurately detect the presence of N2H4 and monitor the changes in its concentration. RESULTS: For this purpose, we designed and synthesized a series of myricetin fluorescence probes 3-(substituent group)-5,7-dimethoxy-4-oxo-2-(3,4,5-trimethoxy. phenyl)-4H-chromen-4-one (Myr-R) for N2H4 detection. In the presence of N2H4, the probe 5,7-dimethoxy-3-(2,3,4,5,6-pentafluorobenzoate)-2-(3,4,5-trimethoxyphen-yl). -4H-chr-omen-4-one (Myr-3) shows significant fluorescence changes, double emission properties and a large Stokes shift (183 nm), and exhibits high selectivity and sensitivity to N2H4 (The detection limit is 93 nM). Importantly, the qualitative and quantitative analysis of N2H4 in water, soil, and air can be accomplished using fluorescence, smartphone, and UV lamps coupled with Myr-3. In addition, Myr-3 can be used for monitoring and imaging intracellular N2H4. Meanwhile, the fluorophore 3-hydroxy-5,7-dimethoxy-2-(3,4,5-trimethoxyphenyl)-4H-benzopyran-4-one (Myr-Me) was applied to fingerprinting of different substrate materials due to the fact that it exhibits strong yellow fluorescence emission in the solid state and shows excellent contrast and high resolution. SIGNIFICANCE: The probe Myr-3 is not only able to rapidly detect N2H4 in complex environments, but also can be used for imaging intracellular N2H4. In addition, the fluorophore Myr-Me can be used as an effective imaging agent for visual fingerprinting. These properties enable the probe Myr-3 and the fluorophore Myr-Me for a wide range of potential applications in related fields.

Mercury-Mediated Epitaxial Accumulation of Au Atoms for Stained Hydrogel-Improved On-Site Mercury Monitoring.

Trivalent Au ions are easily reduced to be zerovalent atoms by coexisting reductant reagents, resulting in the subsequent accumulation of Au atoms and formation of plasmonic nanostructures. In the absence of stabilizers or presence of weak stabilizers, aggregative growth of Au nanoparticles (NPs) always occurs, and unregular multidimensional Au materials are consequently constructed. Herein, the addition of nanomole-level mercury ions can efficiently prevent the epitaxial accumulation of Au atoms, and separated Au NPs with mediated morphologies and superior plasmonic characteristics are obtained. Experimental results and theoretical simulation demonstrate the Hg-concentration-reliant formation of plasmonic nanostructures with their mediated sizes and shapes in the presence of weak reductants. Moreover, the sensitive plasmonic responses of reaction systems exhibit selectivity comparable to that of Hg species. As a concept of proof, polymeric carbon dots (CDs) were used as the initial reductant, and the reactions between trivalent Au and CDs were studies. Significantly, Hg atoms prevent the epitaxial accumulation of Au atoms, and plasmonic NPs with decreased sizes were in situ synthesized, corresponding to varied surface plasmonic resonance absorption performance of the CD-induced hybrids. Moreover, with the integration of sensing substrates of CD-doped hydrogels, superior response stabilities, analysis selectivity, and sensitivity of Hg2+ ions were achieved on the basis of the mercury-mediated in situ chemical reactions between trivalent Au ions and reductant CDs. Consequently, a high-performance sensing strategy with the use of Au NP-staining hydrogels (nanostaining hydrogels) was exhibited. In addition to Hg sensing, the nanostaining hydrogels facilitated by doping of emerging materials and advanced chem/biostrategies can be developed as high-performance on-site monitoring routes to various pollutant species.

Tailoring Efficient Fluorogenic Tactic for Ultrasensitive Detection of Dopamine in Urine and Rat Brain through Real-Time and In Situ Formation of High-Performance Fluorophore.

Owing to the predominance of dopamine (DA) in controlling mental health, planning an innovative method for DA detection with simplicity and high efficacy is conducive to the assessment of neurological disorders. Herein, an efficient fluorogenic tactic has been elaborated for ultrasensitive detection of DA with remarkably enhanced turn-on response. Utilizing a twisted intramolecular charge-transfer (TICT)-suppressing strategy, a highly emissive azocine derivative 11-hydroxy-2,3,6,7,11,12,13,14-octahydro-1H,5H,10H-11,14a-methanoazocino[5',4':4,5]furo[2,3-f]pyrido[3,2,1-ij]quinolin-10-one (J-Aza) is generated via a one-step reaction between DA and 8-hydroxyjulolidine. It is marvelous that J-Aza not only possesses ideal fluorescence quantum yield (ΦF) as high as 0.956 but also exhibits bathochromic shifted fluorescence (green emissive) and stronger anti-photobleaching capacity superior to traditional azocine-derived 1,2,3,4-tetrahydro-5H-4,11a-methanobenzofuro[2,3-d]azocin-5-one (Aza) with moderate ΦF, blue fluorescence, and poor photostability. By confining the TICT process, the detection limit to DA can be reduced to 80 pM, which is competitive in contrast to previously reported fluorescence methods. Encouraged by the instant response (within 90 s), wide linear range (0.1-500 nM), great selectivity, and excellent sensitivity, this fluorogenic method has been used for the real-time measurement of DA contents in practical urine samples with satisfactory results. Furthermore, the cerebral DA level in the reserpine-induced depression rat model has also been evaluated by our designed method, demonstrating its potent analytical applicability in the biosensing field.

Modulating adsorption energy on nickel nitride-supported ruthenium nanoparticles through in-situ electrochemical activation for urea-assisted alkaline hydrogen production.

The rational design of electrocatalysts with exceptional performance and durability for hydrogen production in alkaline medium is a formidable challenge. In this study, we have developed in-situ activated ruthenium nanoparticles dispersed on Ni3N nanosheets, forming a bifunctional electrocatalyst for hydrogen evolution and urea oxidation. The results of experimental analysis and theoretical calculations reveal that the enhanced hydrogen evolution reaction (HER) performance of O-Ru-Ni3N stems primarily from the optimized hydrogen adsorption and hydroxyl adsorption on Ru sites. The O-Ru-Ni3N on nickel foam (NF) electrode exhibits excellent HER performance, requiring only 29 mV to reach 10 mA cm-2 in an alkaline medium. Notably, when this O-Ru-Ni3N/NF catalyst is employed for both HER and urea oxidation reaction (UOR) to create an integrated H2 production system, a current density of 50 mA cm-2 can be generated at the cell voltage of 1.41 V. This report introduces an energy-efficient catalyst for hydrogen production and proposes a viable strategy for anodic activation in energy chemistry.

An intelligent "chemical tongue" for high-order monitoring ATP-related physiological phosphates and ATP hydrolysis through diverse transduction principles.

For discriminating diverse analytes and monitoring a specific chemical reaction, the emerging multi-channel "chemical nose/tongue" is challenging multi-material "chemical nose/tongue". The former contributes greatly to integrating different transduction principles from a single sensing material, avoiding the need for complex design, high cost, and tedious operation involved with the latter. Therefore, this high-order sensing puts a particular emphasis on the effects of encapsulation. Herein, the plasmonic gold nanoparticles (Au NPs) are encapsulated as a core into the fluorescent guanine monophosphate-Tb3+ infinite coordination polymer nanoparticles (GMP-Tb ICPs) to obtain a core-shell nanocomposite named Au NPs@GMP-Tb ICPs. Hence, a dual-channel "chemical tongue" based on Au NPs@GMP-Tb ICPs is present to realize high-order sensing of adenosine triphosphate (ATP)-related physiological phosphates and the monitoring of ATP hydrolysis. Considering the affinity of Tb3+ towards P-O bonds, four inorganic phosphates and three nucleotide phosphates with different phosphate group numbers and steric hindrance effect directly regulate two stimulus responses (fluorescence intensity and UV-vis absorbance) of Au NPs@GMP-Tb ICPs. Robust statistical methods, such as linear discriminant analysis and hierarchical cluster analysis, are used to recognize each phosphate by the developed sensor array either in the aqueous solution or in complex media such as serum, together with efficiently monitored ATP hydrolysis at different intervals. These findings and blind test clarify that the designed "chemical tongue" guarantees interference resistance and strengthens analytical capacity, together with offering valuable insight into "lab-on-a-nanoparticle" development for monitoring specific chemical reactions.

Constructing of CoP-Nb2O5 p-n heterojunction with built-in electric field to accelerate the charge migration in electrocatalytic hydrogen evolution.

Studying interfacial charge transfer is of great significance for the preparation of electrocatalysts with high activity for the hydrogen evolution reaction (HER). Particularly, exploring the in-depth catalytic mechanisms and facile fabrication methods of narrow bandgap metal phosphides remains worthwhile. This work successfully combined catalytically inert n-type Nb2O5 with p-type CoP to prepare a p-n heterojunction (CoP-Nb2O5). The self-supporting heterojunction was fabricated by gas-phase phosphorization of the Co(OH)2-Nb2O5 precursor obtained through hydrothermal-electrodeposition strategy. By analyzing the electronic and band structures of CoP and Nb2O5, it was found that there exists a built-in electric field (BEF) in the heterojunction. This BEF can modulate the electronic structure of CoP at the interface, enhance its intrinsic activity and accelerate charge migration. The subsequent experimental results also demonstrate that Nb2O5 can significantly enhance the activity and stability of CoP. Our findings can serve as a novel perspective on the application of p-n heterojunction in the field of energy storage and conversion.

A wide-range ratiometric sensor mediating fluorescence and scattering based on carbon dots/metal-organic framework composites for the detection of bisulfite/sulfite in sugar.

Bisulfite (HSO3-) and sulfite (SO32-) are commonly employed in food preservatives and are also significant environmental pollutants. Thus, developing an effective method for detecting HSO3-/SO32- is crucial for food safety and environment monitoring. In this work, based on carbon dots (CDs) and zeolitic imidazolate framework-90 (ZIF-90), a composite probe (named CDs@ZIF-90) is constructed. The fluorescence signal and the second-order scattering signal of CDs@ZIF-90 are employed to ratiometricly detect HSO3-/SO32-. This proposed strategy exhibits a broad linear range for HSO3-/SO32- determination (10 µM to 8.5 mM) with a limit of detection of 2.74 µM. This strategy is successfully applied for evaluating HSO3-/SO32- in sugar with satisfactory recoveries. Therefore, this work has uniquely combined the fluorescence and second-order scattering signals to establish a novel sensing system with a wide linear range, which is applicable for ratiometric sensing of HSO3-/SO32- in actual samples.

A photoelectrochemical biosensor based on ZnIn2S4@AuNPs coupled with circular bipedal DNA walker for signal-on detection of circulating tumor DNA.

The circulating tumor DNA (ctDNA) is a crucial cancer marker, its sensitive monitoring is useful for early diagnose and therapy of tumor-related diseases. Herein, a bipedal DNA walker with multiple recognition sites is designed through the transition of dumbbell-shaped DNA nanostructure to realize the dual amplification of the signal and achieve ultrasensitive photoelectrochemical (PEC) detection of ctDNA. Initially, the ZnIn2S4@AuNPs is obtained by combining the drop coating method with electrodeposition method. When the target is present, the dumbbell-shaped DNA structure transforms into an annular bipedal DNA walker that can walk unrestrictedly on the modified electrode. After the cleavage endonuclease (Nb.BbvCI) was added to the sensing system, the ferrocene (Fc) on the substrate is released from the electrode surface, and the transfer efficiency of photogenerated electron-hole pairs is extremely improved, enabling the "signal on" testing of ctDNA. The detection limit of the prepared PEC sensor is 0.31 fM, and the recovery of actual samples varied between 96.8 and 103.6% with an average relative standard deviation of about 8%. Meaningfully, the prepared PEC biosensor with an innovative bipedal DNA walker has potential application value for ultrasensitive detection of other nucleic acid-related biomarker.