Acute effects of eccentric overload training with different loading doses in male sprinters.

Objective: The primary objective of this study was to investigate the immediate effects of two doses (Dose1 and Dose2,D1 and D2) of inertial Flywheel Eccentric Overload (FEOL), Eccentric Hook (EH), and High-intensity Half Squat (HHS) on muscle explosiveness in male sprinters. Methods: Twenty-one sub-elite male sprinters were randomly assigned to three groups: the FEOL group (n=7), the EH group (n=7), and the HSS group (n=7),Measurements of athletes' explosive jumps (CMJ, SJ, SLJ) heights, relative peak power indices, and 30-m sprint times were collected before and 6 min after the intervention. Results: At D1 loading dose, CMJ, SJ jump height, and relative peak power increased significantly (p < 0.05) after HHS training intervention, while there was no significant change in FEOL and EH training (p > 0.05). At D2 loading dose, CMJ, SJ jump height, and relative peak power increased significantly (p < 0.01) after FEOL and EH training intervention, but at D2HHS intervention, these indexes tended to decrease (p < 0.05). None of the three training protocols significantly improved SLJ performance (p > 0.05). CMJ vertical jump height and relative peak power were significantly higher after D2FEOL and D2EH interventions than after D1HHS (P < 0.05). Conclusion: D1HHS, D2FEOL and D2EH3 intervention methods can all improve the performance of sub-elite athletes in the 30-m test, CMJ test and SJ test. in the CMJ test, FEOL training demonstrated a higher acute augmentation effect compared to EH training.

The Relationship between SNAP25 and Some Common Human Neurological Syndromes.

Over the years, research on the pathogenesis of neurological diseases has progressed slowly worldwide. However, as the incidence rate continues to increase and the disease gradually develops, early diagnosis and treatment have become a top priority. SANP25, a protein present on the presynaptic membrane and involved in neurotransmitter release, is closely related to the loss or abnormal expression of synapses and neurons. SNAP25 deficiency can lead to synaptic disorders and inhibit neurotransmitter release. Therefore, a large amount of literature believes that SNAP25 gene mutation is a risk factor for many neurological diseases. This review used advanced search on PubMed to conduct extensive article searches for relevant literature. The search keywords included SNAP25 and Alzheimer's disease, SNAP25 and Parkinson's disease, and so on. After reading and summarizing the previous papers, the corresponding conclusions were obtained to achieve the purpose of the review. The deficiency or variation of SNAP25 might be related to the onset of schizophrenia, epilepsy, attention deficit/hypoactivity disorder, bipolar disorder effective disorder, and autism. SNAP25 has been found to be used as a neuropathological marker for neurological diseases, which could be the target of diagnosis or treatment of Alzheimer's disease and Parkinson's disease. Cerebrospinal Fluid (CSF) or blood has been found to enable more effective drug development.

Continual medical image denoising based on triplet neural networks collaboration.

BACKGROUND: When multiple tasks are learned consecutively, the old model parameters may be overwritten by the new data, resulting in the phenomenon that the new task is learned and the old task is forgotten, which leads to catastrophic forgetting. Moreover, continual learning has no mature solution for image denoising tasks. METHODS: Therefore, in order to solve the problem of catastrophic forgetting caused by learning multiple denoising tasks, we propose a Triplet Neural-networks Collaboration-continuity DeNosing (TNCDN) model. Use triplet neural networks to update each other cooperatively. The knowledge from two denoising networks that maintain continual learning capability is transferred to the main-denoising network. The main-denoising network has new knowledge and can consolidate old knowledge. A co-training mechanism is designed. The main-denoising network updates the other two denoising networks with different thresholds to maintain memory reinforcement capability and knowledge extension capability. RESULTS: The experimental results show that our method effectively alleviates catastrophic forgetting. In GS, CT and ADNI datasets, compared with ANCL, the TNCDN(PromptIR) method reduced the average degree of forgetting on the evaluation index PSNR by 2.38 (39%) and RMSE by 1.63 (55%). CONCLUSION: This study aims to solve the problem of catastrophic forgetting caused by learning multiple denoising tasks. Although the experimental results are promising, extending the basic denoising model to more data sets and tasks will enhance its application. Nevertheless, this study is a starting point, which can provide reference and support for the further development of continuous learning image denoising task.

Enhancing Interfacial Lithiophilicity and Stability with PVDF/In(NO3)3 Composite Separators for Durable Lithium Metal Anodes.

Separator modification is a promising method for advancing lithium metal anodes; however, achieving homogeneous lithium-ion flux and uniform plating/stripping processes remains challenging. In this work, we introduce a novel approach by developing a composite separator, termed PVDF-INO, which integrates In(NO3)3 (INO) into polyvinylidene fluoride (PVDF) to create a 12 µm thick layer. This addition significantly enhances the interaction between the separator and the electrolyte, creating a lithophilic matrix that ensures an even distribution of lithium ions. This uniform ion distribution promotes consistent lithium deposition and dissolution, resulting in a durable, dendrite-free lithium metal anode. Moreover, the PVDF-INO separator not only enhances the affinity with electrolytes but also maintains stable lithium-ion flux, which is essential for reliable and safe battery operation. Consequently, it sustains operation over 750 h in a Li||Li symmetric battery configuration, with a low overpotential of just 28 mV. Additionally, full cells equipped with LiFePO4 cathodes and the PVDF-INO separator exhibit superior cycling performance, maintaining a capacity retention of 92.9% after 800 cycles at 1 C. This work paves the way for significant advancements in the field of lithium metal batteries, offering a promising solution to longstanding energy storage challenges.

Sustainable succinic acid production from lignocellulosic hydrolysates by engineered strains of Yarrowia lipolytica at low pH.

Succinic acid (SA) is a valuable C4 platform chemical with diverse applications. Lignocellulosic biomass represents an abundant and renewable carbon resource for microbial production of SA. However, the presence of toxic compounds in pretreated lignocellulosic hydrolysates poses challenges to cell metabolism, leading to inefficient SA production. Here, engineered Yarrowia lipolytica Hi-SA2 was shown to utilize glucose and xylose from corncob hydrolysate to produce 32.6 g/L SA in shaking flasks. The high concentration of undetoxified hydrolysates significantly inhibited yeast growth and SA biosynthesis, with furfural identified as the key inhibitor. Through overexpressing glutathione synthetase encoding gene YlGsh2, the tolerance of engineered strain to furfural and toxic hydrolysate was significantly improved. In a 5-L bioreactor, Hi-SA2-YlGsh2 strain produced 45.34 g/L SA within 32 h, with a final pH of 3.28. This study provides a sustainable process for bio-based SA production, highlighting the efficient SA synthesis from lignocellulosic biomass through low pH fermentation.

Comparing the Effect of Isoinertial Flywheel Training and Traditional Resistance Training on Maximal Strength and Muscle Power in Healthy People: A Systematic Review and Meta-Analysis.

BACKGROUND: This systematic review and meta-analysis aimed to analyze whether isoinertial flywheel training (FWT) is superior to traditional resistance training (TRT) in enhancing maximal strength and muscle power in healthy individuals. METHODS: Electronic searches were conducted in the Web of Science, PubMed, Cochrane Library, SPORTDiscus, and Scopus databases up to 21 April 2024. Outcomes were analyzed as continuous variables using either a random or fixed effects model to calculate the standardized mean difference (SMD) and 95% confidence intervals (CI). RESULTS: A total of sixteen articles, involving 341 subjects, met the inclusion criteria and were included in the statistical analyses. The pooled results indicate no statistically significant differences between FWT and TRT in developing maximal strength in healthy individuals (SMD = 0.24, 95% CI [-0.26, 0.74], p = 0.35). Additionally, the pooled outcomes showed a small-sized effect in muscle power with FWT (SMD = 0.47, 95% CI [0.10, 0.84]), which was significantly higher than that with TRT (p = 0.01) in healthy individuals. Subgroup analysis revealed that when the total number of FWT sessions is between 12 and 18 (1-3 times per week), it significantly improves muscle power (SMD = 0.61, 95% CI [0.12, 1.09]). Significant effects favoring FWT for muscle power were observed in both well-trained (SMD = 0.58, 95% CI [0.04, 1.13]) and untrained individuals (SMD = 1.40, 95% CI [0.23, 2.57]). In terms of exercise, performing flywheel training with squat and lunge exercises significantly enhances muscle power (SMD = 0.43; 95% CI: 0.02-0.84, and p = 0.04). Interestingly, FWT was superior to weight stack resistance training (SMD = 0.61, 95% CI [0.21, 1.00]) in enhancing muscle power, while no significant differences were found compared to barbell free weights training (SMD = 0.36, 95% CI [-0.22, 0.94]). CONCLUSIONS: This meta-analysis confirms the superiority of FWT compared to TRT in promoting muscle power in both healthy untrained and well-trained individuals. Squats and lunges for FWT are more suitable for improving lower limb explosive power. It is recommended that coaches and trainers implement FWT for six weeks, 2-3 times per week, with at least a 48 h interval between each session. Although FWT is not superior to free weights training, it is advisable to include FWT in sport periodization to diversify the training stimuli for healthy individuals.

Boosting Smoking Cessation Intervention Utilization in Chinese Healthcare Providers: A Randomized Controlled Trial of the 'WeChat WeQuit' Medical Education Program.

INTRODUCTION: In China, standard smoking cessation practices are rarely used by healthcare service providers (HSPs). WeChat, a popular social media app, has been widely used in China. METHODS: In this single-blind, randomized trial, undertaken in China with 8-week interventions and follow-up to 34 weeks, 1887 HSPs were randomly selected to the intervention (n=942) or control group (n=945) from Oct 2020 to Oct 2021. The intervention group received regular smoking cessation training program messages from the professional team for 8 weeks and followed for 34 weeks. The control group received thanks messages for 8 weeks, and follow-up to 34 weeks. Both groups received a hard copy of the manual after randomization. The primary outcome measure was the utilization rate of behavioral and pharmacotherapy interventions for smoking patients from 9 to 34 weeks. This trial is registered at ClinicalTrials.gov (number NCT03556774). RESULTS: HSPs in the intervention group demonstrated a better overall utilization rate of smoking cessation at 20-week follow-up compared to the control group (35.54% vs 31.41%, p=0.036). Additionally, both groups showed a significant increase in the adoption of various components of the 5A's model - including "Assess", "Assist: set a quit date", "Assist: recommend cessation program", "Assist: provide information", "Assist: recommend medication", and "Arrange" - at the 9-week follow-up relative to baseline. Notably, at the 20-week follow-up, the intervention group reported significantly enhanced utilization rates for all these components, except "Assist: set a quit date". CONCLUSIONS: The "Wechat Wequit" training program effectively enhanced smoking cessation intervention adoption among Chinese HSPs. IMPLICATION: 'WeChat WeQuit' training program was effective in increasing the provision of effective tobacco cessation interventions by Chinese-speaking HSPs to patients with cigarette smoking, which could provide valuable insights into bridging the gap between need and services for smoking cessation in China.

Mechanically Interlocked Polyrotaxane Networks with Collective Motions of Multiple Main-Chain Mechanical Bonds.

Type I main-chain polyrotaxanes (PRs) with multiple wheels threaded onto the axle are widely employed to design slide-ring materials. However, Type II main-chain PRs with axles threading into the macrocycles on the polymer backbones have rarely been studied, although they feature special topological structures and dynamic characteristics. Herein, we report the design and preparation of Type II main-chain PR-based mechanically interlocked networks (PRMINs), based on which the relationship between microscopic motion of mechanical bonds on the PRs and macroscopic mechanical performance of materials has been revealed. The representative PRMIN-2 exhibits a robust feature in tensile tests with high stretchability (1680%) and toughness (47.5 MJ/m3). Moreover, it also has good puncture performance with puncture energy of 22.0 mJ. Detailed rheological measurements and coarse-grained molecular dynamics (CGMD) simulation reveal that the embedded multiple [2]rotaxane mechanical bonds on the PR backbones of PRMINs could undergo a synergistic long-range sliding motion under external force, with the introduction of collective dangling chains into the network. As a result, the synchronized motions of coherent PR chains can be readily activated to accommodate network deformation and efficiently dissipate energy, thereby leading to enhanced mechanical performances of PRMINs.

Association between sex hormone binding globulin and metabolic syndrome in US adults: insights from National Health and Nutrition Examination Survey (NHANES) 2013-2016.

BACKGROUND: Metabolic syndrome (MetS) presents a notable public health challenge on a global scale, exerting a considerable impact on individuals' health and quality of life. There is mounting evidence indicating a robust association between MetS and levels of sex hormones. Therefore, the study aims to explore the relationship between sex hormone binding-globulin (SHBG) and MetS, and to provide evidence that could inform the development of effective prevention strategies for MetS. METHODS: Data for this cross-sectional investigation were collected during the 2013-2016 cycle of the National Health and Nutrition Examination Survey (NHANES), from which 5,499 adults were sampled. The criteria established by the Adult Treatment Program III of the National Cholesterol Education Program were utilized to define MetS. SHBG levels were measured using a standardized technique. Multivariate-adjusted logistic regression, multivariate restricted cubic spline, and threshold effect analyses were utilized to investigate the association between SHBG levels and MetS. Moreover, the stratified analyses and interaction tests of covariables were presented in a forest plot. Finally, sensitivity analysis was utilized to ensure the robustness of the results. RESULTS: Overall, 1822 participants had MetS. After adjusting for possible confounders, SHBG levels were associated with MetS (Odds ratio [OR], 0.984; 95% confidence interval [CI], 0.981-0.986; P < 0.01). The multivariate restricted cubic spline analysis demonstrated a non-linear association between SHBG and MetS (P < 0.001). With two piecewise regression models, the adjusted OR of developing MetS was 0.964 (95% CI, 0.959-0.969; P < 0.001) among people with SHBG < 76.653 nmol/L, but there was no correlation between SHBG and MetS in participants with SHBG ≥ 76.653 nmol/L. The stability of the association between SHBG levels and MetS was confirmed using subgroup analysis and sensitivity analyses. CONCLUSIONS: Our results suggest that reduced SHBG levels are associated with an increased prevalence of MetS in adults, particularly when SHBG levels are below 76.653 nmol/L. More investigation is required to understand comprehend the mechanisms underlying these results and to delve into their clinical implications.

Service blockage on the downlink in large-scale satellite optical networks: a multi-downlink scheduling for routing selection.

Over years of space laser communication technology advances, satellite optical networks (SONs) have emerged as a pivotal component in 6 G networks. Satellite services are transmitted from the global view, undergoing transmission through SONs, and being downloaded to the targeted areas. However, the transmission capacity of satellites passing through the areas where users are concentrated may be insufficient to download services transmitted worldwide. This problem exists in various kinds of satellite networks and may cause a large amount of service congestion. In this paper, we propose a multi-downlink delivery routing selection (MDD-RS) strategy to study the total utilization of transmission capacity of SONs. We construct an integer linear programming (ILP) model to establish an optimal case study for minimal network capacity occupation. Also, we design an online option, MDD-RS heuristic algorithm, dynamically calculating path routes, considering bandwidth allocation and resource constraints. A comparative analysis against the conventional single-downlink scheme reveals superior performance of the MDD-RS heuristic algorithm, with a reduction in blocking probability of 0.129 and an improvement in bandwidth utilization of 0.032.

Enhancing Reversibility and Stability of Mg Metal Anodes: High-Exposure (002) Facets and Nanosheet Arrays for Superior Mg Plating/Stripping.

Magnesium metal batteries (MMBs), recognized as promising contenders for post-lithium battery technologies, face challenges such as uneven magnesium (Mg) plating and stripping behaviors, leading to uncontrollable dendrite growth and irreversible structural damage. Herein, we have developed a Mg foil featuring prominently exposed (002) facets and an architecture of nanosheet arrays (termed (002)-Mg), created through a one-step acid etching method. Specifically, the prominent exposure of Mg (002) facets, known for their inherently low surface and adsorption energies with Mg atoms, not only facilitates smooth nucleation and dense deposition but also significantly mitigates side reactions on the Mg anode. Moreover, the nanosheet arrays on the surface evenly distribute the electric field and Mg ion flux, enhancing Mg ion transfer kinetics. As a result, the fabricated (002)-Mg electrodes exhibit unprecedented long-cycle performance, lasting over 6000 h (> 8 months) at a current density of 3 mA cm-2 for a capacity of 3 mAh cm-2. Furthermore, the corresponding pouch cells equipped with various electrolytes and cathodes demonstrate remarkable capacity and cycling stability, highlighting the superior electrochemical compatibility of the (002)-Mg electrode. This study provides new insights into the advancement of durable MMBs by modifying the crystal structure and morphology of Mg.

Halogenated Dibenzo[f,h]quinoxaline Units Constructed 2D-Conjugated Guest Acceptors for 19% Efficiency Organic Solar Cells.

Halogenation of Y-series small-molecule acceptors (Y-SMAs) is identified as an effective strategy to optimize photoelectric properties for achieving improved power-conversion-efficiencies (PCEs) in binary organic solar cells (OSCs). However, the effect of different halogenation in the 2D-structured large π-fused core of guest Y-SMAs on ternary OSCs has not yet been systematically studied. Herein, four 2D-conjugated Y-SMAs (X-QTP-4F, including halogen-free H-QTP-4F, chlorinated Cl-QTP-4F, brominated Br-QTP-4F, and iodinated I-QTP-4F) by attaching different halogens into 2D-conjugation extended dibenzo[f,h]quinoxaline core are developed. Among these X-QTP-4F, Cl-QTP-4F has a higher absorption coefficient, optimized molecular crystallinity and packing, suitable cascade energy levels, and complementary absorption with PM6:L8-BO host. Moreover, among ternary PM6:L8-BO:X-QTP-4F blends, PM6:L8-BO:Cl-QTP-4F obtains a more uniform and size-suitable fibrillary network morphology, improved molecular crystallinity and packing, as well as optimized vertical phase distribution, thus boosting charge generation, transport, extraction, and suppressing energy loss of OSCs. Consequently, the PM6:L8-BO:Cl-QTP-4F-based OSCs achieve a 19.0% efficiency, which is among the state-of-the-art OSCs based on 2D-conjugated Y-SMAs and superior to these devices based on PM6:L8-BO host (17.70%) and with guests of H-QTP-4F (18.23%), Br-QTP-4F (18.39%), and I-QTP-4F (17.62%). The work indicates that halogenation in 2D-structured dibenzo[f,h]quinoxaline core of Y-SMAs guests is a promising strategy to gain efficient ternary OSCs.

Application of pervious concrete pavement in the "breathe in-breathe out" design for sponge cities in China.

Sponge city construction is an ideal approach to mitigate the degradation of urban water environments. Among road materials, permeable concrete pavement stands out due to its unique structure that allows rainwater runoff to flow through its pores. This paper analyzes the current application status and the prospect of different permeable pavement designs in China's sponge cities, aiming to offer valuable insights for urban planning and construction. Statistical analysis summarizes the spatial-temporal distribution patterns of urban flooding disasters in China and their causes. By comparing the characteristics and advantages of pervious concrete pavement with traditional concrete pavement, the potential of permeable concrete pavement in sponge city construction is summarized through case studies. The findings highlight that by adjusting the pore size, permeable concrete pavement can collect rainwater while filtering impurities, thereby purifying surface runoff. The range of the pervious coefficient should ideally fall within the range of 4~8 mm/s. In addition, the pavement's large contact area with the air and internal water evaporation contributes to its self-regulating capability, reducing the occurrence of extreme temperatures. Related experiments have shown that from 8 am to 12 pm, pervious concrete pavement can reduce the temperature by approximately 1 °C compared to conventional concrete. From 12 pm to 8 pm, this temperature difference increases to approximately 3 °C. To meet the needs of environmental protection and resource utilization, permeable concrete pavement can serve as an ideal tool to achieve green and low-carbon development.

Study on harmless treatment of electrolytic manganese residue by low temperature thermochemical method.

The Electrolytic Manganese Residue (EMR) is a by-product of the electrolytic manganese metal (EMM) industry, containing high concentrations of potential pollutants such as NH4+-N and soluble Mn2+. These components pose a serious threat to the ecological environment. To explore accurate, efficient, and harmless treatment methods for EMR, this study proposes a low-temperature thermochemical approach. The orthogonal experiment design investigates the effects of reaction temperature, reaction time, quicklime (CaO), sodium carbonate (Na2CO3), sodium phosphate (Na3PO4) (Reviewer #3), and water consumption on manganese solidified and ammonia removal from EMR. The results indicate that optimal conditions are a reaction temperature of 60 ℃ (Reviewer #3) and a reaction time of 10 min. CaO precipitates Mn2+ as manganese hydroxide (Mn(OH)2) (Reviewer #3), achieving effective manganese solidified and ammonia removal. The addition of Na2CO3 causes Mn2+ to form manganesecarbonate (MnCO3) (Reviewer #3)precipitate, while Na3PO4 makes Mn2+ form Manganese phosphate trihydrate (Mn3(PO4)2·3H2O) (Reviewer #3). Increased water consumption enhances the interaction adequacy between ions. Under optimal conditions (CaO 10%, Na2CO3 1%, Na3PO4 0.5%, and 80% water consumption), the removal rate of ammonium ions reaches 98.5%, and the solidification rate of soluble Mn2+ is 99.9%. The order of influence on ammonium ion removal is CaO > water consumption > Na3PO4 > Na2CO3. Therefore, this study provides a new method for low-cost process disposal and efficient harmless treatment of EMR (Reviewer #3).

Approaching Ultimate Synthesis Reaction Rate of Ni-Rich Layered Cathodes for Lithium-Ion Batteries.

Nickel-rich layered oxide LiNixCoyMnzO2 (NCM, x + y + z = 1) is the most promising cathode material for high-energy lithium-ion batteries. However, conventional synthesis methods are limited by the slow heating rate, sluggish reaction dynamics, high energy consumption, and long reaction time. To overcome these challenges, we first employed a high-temperature shock (HTS) strategy for fast synthesis of the NCM, and the approaching ultimate reaction rate of solid phase transition is deeply investigated for the first time. In the HTS process, ultrafast average reaction rate of phase transition from Ni0.6Co0.2Mn0.2(OH)2 to Li- containing oxides is 66.7 (% s-1), that is, taking only 1.5 s. An ultrahigh heating rate leads to fast reaction kinetics, which induces the rapid phase transition of NCM cathodes. The HTS-synthesized nickel-rich layered oxides perform good cycling performances (94% for NCM523, 94% for NCM622, and 80% for NCM811 after 200 cycles at 4.3 V). These findings might also assist to pave the way for preparing effectively Ni-rich layered oxides for lithium-ion batteries.

SENP3-regulated Nodal signaling plays a potential role in cardiac left-right asymmetry development.

Congenital heart disease (CHD) is a type of major defect that occurs during embryonic development. Although significant advances have been made in the treatment of CHD, its etiology and molecular mechanism remain unclear. To identify the critical role of SUMOylation in cardiac development, we generated SENP3 knockout mice and showed that SENP3 knockout mice die on embryonic day 8.5 with an open neural tube and reversed left-right cardiac asymmetry. Moreover, SENP3 knockout promoted apoptosis and senescence of H9C2 cells. Further studies showed that Nodal, a critical gene that forms left-right asymmetry, is regulated by SENP3 and that SENP3 regulates cell apoptosis and senescence in a Nodal-dependent manner. Furthermore, Nodal was hyper-SUMOylated after SENP3 knockout, and SUMOylation of Nodal inhibited its ubiquitination and ubiquitin-proteasome degradation pathway. Nodal overexpression enhanced cell apoptosis and senescence; however, the mutation at the SUMOylation site of Nodal reversed its effect on the apoptosis and senescence of H9C2 cells. More importantly, the SENP3-Nodal axis regulates cell senescence by inducing cell autophagy. These results suggest that the SENP3-Nodal signaling axis regulates cardiac senescence-autophagy homeostasis, which in turn affects cardiac development and results in the occurrence of CHD.

AgIn5S8/g-C3N4 Composite Photocatalyst Coupled with Low-Temperature Plasma-Enhanced Degradation of Hydroxypropyl-Guar-Simulated Oilfield Wastewater.

The effective treatment and recovery of fracturing wastewater has always been one of the difficult problems to be solved in oilfield wastewater treatment. Accordingly, in this paper, photocatalytic-coupled low-temperature plasma technology was used to degrade the simulated wastewater containing hydroxypropyl guar, the main component of fracturing fluid. Results indicated that hydroxypropyl-guar wastewater could be degraded to a certain extent by either photocatalytic technology or plasma technology; the chemical oxygen demand and viscosity of the treated wastewater under two single-technique optimal conditions were 781 mg·L-1, 0.79 mPa·s-1 and 1296 mg·L-1, 1.01 mPa·s-1, respectively. Furthermore, the effective coupling of AgIn5S8/gC3N4 photocatalysis and dielectric-barrier discharge-low-temperature plasma not only enhanced the degradation degree of hydroxypropyl guar but also improved its degradation efficiency. Under the optimal conditions of coupling treatment, the hydroxypropyl-guar wastewater achieved the effect of a single treatment within 6 min, and the chemical oxygen demand and viscosity of the treated wastewater reduced to below 490 mg·L-1 and 0.65 mPa·s-1, respectively. In the process of coupled treatment, the AgIn5S8/gC3N4 could directly absorb the light and strong electric field generated by the system discharge and play an important role in the photocatalytic degradation, thus effectively improving the energy utilization rate of the discharge system and enhancing the degradation efficiency of hydroxypropyl guar.

Toxic Effects of Methamphetamine on Reproductive Systems, Embryo Development, and Newborns: An Evidence-Based Review.

Methamphetamine (METH), an amphetamine-type stimulant, has been extensively abused globally in the past decades. METH use causes great harm to the major systems of the human body. Specifically, METH has a negative impact on the hypothalamic- pituitary-testicular axis, testicular structure, sperm function, ovarian folliculogenesis, oocyte quality, embryo development, and newborns. However, the mechanisms underlying these toxic effects have not yet been fully described. This study reviews the evidence concerning the impact of METH on male and female reproduction in the context of the testis, sperm, ovaries, oocytes, reproductive hormones, embryo development, and newborns, discussing the potential pathophysiological mechanisms in the reproductive toxicity induced by METH.