Finite element analysis of modified Slongo's external fixation in the treatment of supracondylar humeral fractures in older children.

Older children over 8 years old are at higher risk of elbow joint stiffness after treatment of supracondylar humeral fractures. The objective of this study was to improve the Slongo's external fixation system for treating supracondylar humeral fractures in older children. This would be achieved by increasing fixation strength and providing a theoretical basis through finite element analysis and mechanical testing. A 13-year-old female patient with a history of previous fracture was selected for CT data processing to create a three-dimensional model of the distal humerus fracture. Two internal fixation models were established, using the Slongo's external fixation method with Kirschner wire (Group A) and modifying the Slongo's external fixation (Kirschner wire tail fixation) (Group B). The fracture models were then subjected to mechanical loading analysis using Finite Element Analysis Abaqus 6.14 software to simulate separation, internal rotation, and torsion loads. A PVC humeral bone model was used to create a supracondylar fracture model, and the A and B internal fixation methods were applied separately. The anterior-posterior and torsional stresses were measured using the Bose Electroforce3510 testing system, followed by a comparative analysis. The finite element simulation results showed that under the same tensile, torsion, and inversion forces, the osteotomy model fixed with Kirschner wire at the distal end in Group B exhibited smaller tensile stress and deformation compared to the unfixed osteotomy model in Group A. This indicated that the fixation strength of Group B was superior to that of Group A. According to the test results of the Bose Electroforce3510 testing system, a simple linear regression analysis was conducted using SPSS software. The K values of rotation angle-torque tests and front and rear displacement-stress tests were calculated for Groups A and B, with Group B showing higher values than Group A. The results of this study supported the significantly enhanced biomechanical reliability and stability of fracture fixation in Group B, which utilized the modified Slongo's external fixation (Kirschner wire tail fixation). This optimized method provides a new choice for the clinical treatment of supracondylar humeral fractures in older children, backed by both clinical evidence and theoretical basis.

Development of CO2-switchable deep eutectic solvent-based liquid-liquid microextraction approach: Application in urinary excretion and tissue distribution studies.

BACKGROUND: Pharmacokinetic studies are pivotal in drug development, focusing on absorption, distribution, and excretion of active compounds. Effective sample preparation methods play a crucial role in these studies. Traditional techniques like protein precipitation and liquid-liquid extraction often involve toxic solvents and are time-consuming. Recently, deep eutectic solvent (DES) has emerged as an eco-friendly alternative due to its high efficiency, low cost, and low toxicity. This study introduces a novel sample pretreatment method using CO2-switchable DES in liquid-liquid microextraction (LLME) to enhance speed, accuracy, and sensitivity in complex biological samples analysis. RESULTS: A liquid-liquid microextraction sample pretreatment method based on switchable DES combined with high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) was established for the analysis of urine and tissue samples. The method was optimized through systematic investigation of key parameters, including DES type, volume, molar ratio, pH, vortex time, gas purge time, and salt addition. The resulting procedure exhibited satisfying linearity (r2 ≥ 0.9958), good precision (RSD ≤6.01 %), desirable recovery (52.44%-98.12 %) and matrix effect (86.22%-119.30 %), and the accuracy and precision of stability were within the ±15 % limit. The proven methods were further applied to urinary excretion study and tissue distribution study of Nelumbinis plumula (NP) extract. The results indicated that the total cumulative excretion of liensinine, isoliensinine and neferine in urine within 240 h was 4.96 %, 0.66 % and 0.44 %, respectively. The tissue distribution study showed that alkaloids mainly distribute in liver, kidney, and spleen. SIGNIFICANCE: This research introduces a groundbreaking technique distinguished by its simplicity, speed, cost-effectiveness, and environmental friendliness. This approach, utilizing CO2-switchable DES as an extraction solvent for LLME, integrates deproteinization and removal of interfering molecules into a single step. This integration showcases its efficiency and convenience, demonstrating significant promise for various applications in the analysis of biological samples. Additionally, this study provides the first report on urinary excretion and tissue distribution of alkaloids from NP using a DES-LLME method. These findings offer valuable insights into the in vivo behavior of herbal medicine, enhancing understanding of pharmacological actions and facilitating clinical rational administration.

Early-treatment cerebral blood flow change as a predictive biomarker of antidepressant treatment response: evidence from the EMBARC clinical trial.

BACKGROUND: Major depressive disorder (MDD) is one of the most prevalent and disabling illnesses worldwide. Treatment of MDD typically relies on trial-and-error to find an effective approach. Identifying early response-related biomarkers that predict response to antidepressants would help clinicians to decide, as early as possible, whether a particular treatment might be suitable for a given patient. METHODS: Data were from the two-stage Establishing Moderators and Biosignatures of Antidepressant Response for Clinical Care (EMBARC) trial. A whole-brain, voxel-wise, mixed-effects model was applied to identify early-treatment cerebral blood flow (CBF) changes as biomarkers of treatment response. We examined changes in CBF measured with arterial spin labeling 1-week after initiating double-masked sertraline/placebo. We tested whether these early 1-week scans could be used to predict response observed after 8-weeks of treatment. RESULTS: Response to 8-week placebo treatment was associated with increased cerebral perfusion in temporal cortex and reduced cerebral perfusion in postcentral region captured at 1-week of treatment. Additionally, CBF response in these brain regions was significantly correlated with improvement in Hamilton Depression Rating Scale score in the placebo group. No significant associations were found for selective serotonin reuptake inhibitor treatment. CONCLUSIONS: We conclude that early CBF responses to placebo administration in multiple brain regions represent candidate neural biomarkers of longer-term antidepressant effects.

Analysis of cartilage loading and injury correlation in knee varus deformity.

Knee varus (KV) deformity leads to abnormal forces in the different compartments of the joint cavity and abnormal mechanical loading thus leading to knee osteoarthritis (KOA). This study used computer-aided design to create 3-dimensional simulation models of KOA with varying varus angles to analyze stress distribution within the knee joint cavity using finite element analysis for different varus KOA models and to compare intra-articular loads among these models. Additionally, we developed a cartilage loading model of static KV deformity to correlate with dynamic clinical cases of cartilage injury. Different KV angle models were accurately simulated with computer-aided design, and the KV angles were divided into (0°, 3°, 6°, 9°, 12°, 15°, and 18°) 7 knee models, and then processed with finite element software, and the Von-Mises stress distribution and peak values of the cartilage of the femoral condyles, medial tibial plateau, and lateral plateau were obtained by simulating the human body weight in axial loading while performing the static extension position. Finally, intraoperative endoscopy visualization of cartilage injuries in clinical cases corresponding to KV deformity subgroups was combined to find cartilage loading and injury correlations. With increasing varus angle, there was a significant increase in lower limb mechanical axial inward excursion and peak Von-Mises stress in the medial interstitial compartment. Analysis of patients' clinical data demonstrated a significant correlation between varus deformity angle and cartilage damage in the knee, medial plateau, and patellofemoral intercompartment. Larger varus deformity angles could be associated with higher medial cartilage stress loads and increased cartilage damage in the corresponding peak stress area. When the varus angle exceeds 6°, there is an increased risk of cartilage damage, emphasizing the importance of early surgical correction to prevent further deformity and restore knee function.

CMOS Scaling for the 5 nm Node and Beyond: Device, Process and Technology.

After more than five decades, Moore's Law for transistors is approaching the end of the international technology roadmap of semiconductors (ITRS). The fate of complementary metal oxide semiconductor (CMOS) architecture has become increasingly unknown. In this era, 3D transistors in the form of gate-all-around (GAA) transistors are being considered as an excellent solution to scaling down beyond the 5 nm technology node, which solves the difficulties of carrier transport in the channel region which are mainly rooted in short channel effects (SCEs). In parallel to Moore, during the last two decades, transistors with a fully depleted SOI (FDSOI) design have also been processed for low-power electronics. Among all the possible designs, there are also tunneling field-effect transistors (TFETs), which offer very low power consumption and decent electrical characteristics. This review article presents new transistor designs, along with the integration of electronics and photonics, simulation methods, and continuation of CMOS process technology to the 5 nm technology node and beyond. The content highlights the innovative methods, challenges, and difficulties in device processing and design, as well as how to apply suitable metrology techniques as a tool to find out the imperfections and lattice distortions, strain status, and composition in the device structures.

Performance of the 2019 ESC pre-test probability model in predicting obstructive coronary artery disease in a Chinese population using coronary computed tomography angiography outcomes.

BACKGROUND: The 2019 European Society of Cardiology (ESC) guidelines proposed a pre-test probability (PTP) model to determine the likelihood of coronary artery disease (CAD). However, the prediction accuracy of this model has not yet been evaluated in Chinese populations. This study aimed to validate the 2019 ESC-PTP model in predicting CAD using coronary computed tomography angiography (CCTA) outcomes in a Chinese population. METHODS: A total of 26,346 consecutive patients with suspected CAD who underwent CCTA were included. The 2019 ESC-PTP model and 2013 ESC-PTP model were calculated for each patient, considering age, sex, and the symptom of chest pain, and the patients were categorized into low-, intermediate-, and high-risk groups. The predictive performance of the 2019 ESC-PTP model was evaluated by comparing it with the 2013 ESC-PTP model and the observed prevalence of CAD from CCTA. RESULTS: Among the 11,234 patients analyzed in the study, 1896 (16.9%) patients were found to have obstructive CAD from CCTA. The 2019 ESC-PTP model had better calibration compared to the 2013 ESC-PTP model. After categorization, 80.9% of patients (67.9% in men and 94.4% in women) were in the same risk category as in the 2019 ESC-PTP model, but the risks of younger patients (7.5% versus 2.5%; P â€‹< â€‹0.001) and patients with non-anginal chest pain (13.7% versus 8.2%; P â€‹< â€‹0.001) were underestimated in the 2019 ESC-PTP model. CONCLUSION: The 2019 ESC-PTP model demonstrated a good calibration in predicting CAD in a Chinese population who underwent CCTA, but it exhibited an underestimation of CAD probability in younger patients and patients with non-anginal chest pain.

Combined effect of freshwater salinization and harmful algae on the benthic invertebrate Chironomus pallidivittatus.

Global climate change as well as human activities have been reported to increase the frequency and severity of both salinization and harmful algal blooms (HABs) in many freshwater systems, but their co-effect on benthic invertebrates has rarely been studied. This study simultaneously examined the joint toxicity of salinity and different cyanobacterial diets on the behavior, development, select biomarkers, and partial life cycle of Chironomus pallidivittatus (Diptera). High concentrations of salts (e.g., 1 g/L Ca2+ and Mg2+) and toxic Microcystis had synergistic toxicity, inhibiting development, burrowing ability and causing high mortality of C. pallidivittatus, especially for the Mg2+ treatment, which caused around 90% death. Low Ca2+ concentration (e.g., 0.01 g/L) promoted larval burrowing ability and inhibited toxin accumulation, which increased the tolerance of Chironomus to toxic Microcystis. However, low Mg2+ concentration (e.g., 0.01 g/L) was shown to inhibit the behavior, development and increase algal toxicity to Chironomus. Toxic Microcystis resulted in microcystin (MC) accumulation, inhibited the burrowing ability of larvae, and increased the proportion of male adults (>50%). The combined toxicity level from low to high was verified by the weight of evidence and the grey TOPSIS model, which integrated five lines of evidence to increase the risk assessment accuracy and efficiency. This is the first study that provided insights into ecological risk arising from the joint effect of salinity and harmful algae on benthic organisms. We suggest that freshwater salinization and HABs should be considered together when assessing ecological threats that arise from external stress.

Efficacy of Breast-Conserving Surgery Versus Modified Radical Surgery in the Treatment of Early Breast Cancer: A Meta-Analysis.

Objective: The study aims to assess and compare the outcomes of modified radical surgery, preserving the nipple-areola complex, against radical mastectomy in patients with triple-negative breast cancer. Emphasis is placed on the clinical significance of this comparison, including its potential impact on patient outcomes, quality of life, and healthcare resources. Methods: Relevant literature from January 2017 to January 2022 was searched in the following databases: PubMed, Embase, MEDLINE, Science Citation Index, Web of Science, China National Knowledge Internet, CCD, and CSPD with keywords. The electric search yielded 613 relevant articles, including 351 from Pubmed, 187 from Embase, 5 from MEDLINE, 21 from CNKI, 4 from CCD, and 45 from CSPD. After duplicate screening, 185 items were eliminated, leaving 428 articles. Odds ratios (ORs) and 95% confidence intervals (CIs) were calculated with RevMan 5.3, and sensitivity analysis, cumulative meta-analysis, and publication bias analysis were also performed. A total of 613 relevant articles were collected from the above databases, among which 428 articles remained after the initial screening and were further screened based on the established inclusion and exclusion criteria. The efficacy of modified radical surgery and breast-conserving surgery in the treatment of early breast cancer was assessed by analyzing outcome indicators, including recurrence rate, distant metastatic rate, and three-year survival rate. The methods section details a systematic approach to data collection and analysis, specifying the databases and time frame for the literature search and the statistical tools used for the meta-analysis. The selection process, from the initial number of articles to the final inclusion based on defined criteria, is transparent, ensuring the study's methodological robustness in evaluating the efficacy of surgeries for early breast cancer. Results: Finally, ten articles were found to match the criteria and included in this study. According to the meta-analysis, there was no statistically significant difference between the breast-conserving therapy (BCT) and modified radical mastectomy (MRM) groups in terms of the recurrence rate (OR = 0.76, 95%CI = 0.39, 1.55, P > .05) and distant metastatic rate (OR = 0.81, 95%CI = 0.46, 1.31, P > .05). Nevertheless, the three-year survival rate was 85.2% in the BCT group and 91.7% in the MRM group; a statistically significant difference was observed in the three-year survival rate (OR = 1.47, 95%CI = 1.01, 2.37, P = .03) between the BCT and MRM groups. Accordingly, breast-conserving surgery and modified radical surgery produced comparable clinical outcomes for the treatment of early breast cancer. Conclusion: In the treatment of early breast cancer, breast-conserving surgery has the advantages of less bleeding, fewer clinical complications, and favorable cosmetic outcomes compared with modified radical surgery. Furthermore, patients with breast-conserving surgery showed comparable recurrence and distant metastatic rates to those with modified radical surgery in postoperative follow-up, which, therefore is a suitable treatment option for the widespread recommendation. The study's findings hold significant clinical relevance, implying that while BCT remains a viable option, MRM may offer a survival advantage. This insight empowers both patients and clinicians in making informed, personalized treatment decisions tailored to individual circumstances.

A Ternary Inverter Based on Hybrid Conduction Mechanism of Band-to-Band Tunneling and Drift-Diffusion Process.

In this paper, a novel transistor based on a hybrid conduction mechanism of band-to-band tunneling and drift-diffusion is proposed and investigated with the aid of TCAD tools. Besides the on and off states, the proposed device presents an additional intermediate state between the on and off states. Based on the tri-state behavior of the proposed TDFET (tunneling and drift-diffusion field-effect transistor), a ternary inverter is designed and its operation principle is studied in detail. It was found that this device achieves ternary logic with only two components, and its structure is simple. In addition, the influence of the supply voltage and the key device parameters are also investigated.

Lignin: A multi-faceted role/function in 3D printing inks.

3D printing technology demonstrates significant potential for the rapid fabrication of tailored geometric structures. Nevertheless, the prevalent use of fossil-derived compositions in printable inks within the realm of 3D printing results in considerable environmental pollution and ecological consequences. Lignin, the second most abundant biomass source on earth, possesses attributes such as cost-effectiveness, renewability, biodegradability, and non-toxicity. Enriched with active functional groups including hydroxyl, carbonyl, carboxyl, and methyl, coupled with its rigid aromatic ring structure and inherent anti-oxidative and thermoplastic properties, lignin emerges as a promising candidate for formulating printable inks. This comprehensive review presents the utilization of lignin, either in conjunction with functional materials or through the modification of lignin derivatives, as the primary constituent (≥50 wt%) for formulating printable inks across photo-curing-based (SLA/DLP) and extrusion-based (DIW/FDM) printing technologies. Furthermore, lignin as an additive with multi-faceted roles/functions in 3D printing inks is explored. The effects of lignin on the properties of printing inks and printed objects are evaluated. Finally, this review outlines future perspectives, emphasizing key obstacles and potential opportunities for facilitating the high-value utilization of lignin in the realm of 3D printing.

Glycyrrhiza polysaccharides may have an antitumor effect in γδT cells through gut microbiota and TLRs/NF-κB pathway in mice.

Tumor immunotherapy can be a suitable cancer treatment option in certain instances. Here we investigated the potential immunomodulatory effect of oral glycyrrhiza polysaccharides (GCP) on the antitumor function of γδT cells in intestinal epithelial cells in mice. We found that GCP can inhibit tumor growth and was involved in the regulation of systemic immunosuppression. GCP administration also promoted the differentiation of gut epithelia γδT cells into IFN-γ-producing subtype through regulation of local cytokines in gut mucosa. GCP administration increased local cytokine levels through gut microbiota and the gut mucosa Toll-like receptors / nuclear factor kappa-B pathway. Taken together, our results suggest that GCP might be a suitable candidate for tumor immunotherapy, although further clinical research, including clinical trials, are required to validate these results.

Case report: Cutaneous anthrax diagnosed using mNGS of a formalin-fixed paraffin-embedded tissue sample.

The metagenomic next-generation sequencing (mNGS) method is preferred for genotyping useful for the identification of organisms, illumination of metabolic pathways, and determination of microbiota. It can accurately obtain all the nucleic acid information in the test sample. Anthrax is one of the most important zoonotic diseases, infecting mainly herbivores and occasionally humans. The disease has four typical clinical forms, cutaneous, gastrointestinal, inhalation, and injection, all of which may result in sepsis or meningitis, with cutaneous being the most common form. Here, we report a case of cutaneous anthrax diagnosed by mNGS in a butcher. Histopathology of a skin biopsy revealed PAS-positive bacilli. Formalin-fixed paraffin-embedded (FFPE) tissue sample was confirmed the diagnosis of anthrax by mNGS. He was cured with intravenous penicillin. To our knowledge, this is the first case of cutaneous anthrax diagnosed by mNGS using FFPE tissue. mNGS is useful for identifying pathogens that are difficult to diagnose with conventional methods, and FFPE samples are simple to manage. Compared with traditional bacterial culture, which is difficult to cultivate and takes a long time, mNGS can quickly and accurately help us diagnose anthrax, so that anthrax can be controlled in a timely manner and prevent the outbreak of epidemic events.

Carfilzomib activates ER stress and JNK/p38 MAPK signaling to promote apoptosis in hepatocellular carcinoma cells.

Hepatocellular carcinoma (HCC) is one of the most prevalent and deadly cancers in the world, which is frequently diagnosed at a late stage. HCC patients have a poor prognosis due to the lack of an efficacious therapeutic strategy. Approved drug repurposing is a way for accelerating drug discovery and can significantly reduce the cost of drug development. Carfilzomib (CFZ) is a second-generation proteasome inhibitor, which is highly efficacious against multiple myeloma and has been reported to possess potential antitumor activities against multiple cancers. However, the underlying mechanism of CFZ on HCC is still unclear. Here, we show that CFZ inhibits the proliferation of HCC cells through cell cycle arrest at the G2/M phase and suppresses the migration and invasion of HCC cells by inhibiting epithelial-mesenchymal transition. We also find that CFZ promotes reactive oxygen species production to induce endoplasmic reticulum (ER) stress and activate JNK/p38 MAPK signaling in HCC cells, thus inducing cell death in HCC cells. Moreover, CFZ significantly inhibits HCC cell growth in a xenograft mouse model. Collectively, our study elucidates that CFZ impairs mitochondrial function and activates ER stress and JNK/p38 MAPK signaling, thus inhibiting HCC cell and tumor growth. This indicates that CFZ has the potential as a therapeutic drug for HCC.

Polyoxometalate-Intercalated Tremella-Like CoNi-LDH Nanocomposites for Electrocatalytic Nitrite-Ammonia Conversion.

The electrocatalytic reduction of NO2- (NO2RR) holds promise as a sustainable pathway to both promoting the development of emerging NH3 economies and allowing the closing of the NOx loop. Highly efficient electrocatalysts that could facilitate this complex six-electron transfer process are urgently desired. Herein, tremella-like CoNi-LDH intercalated by cyclic polyoxometalate (POM) anion P8W48 (P8W48/CoNi-LDH) prepared by a simple two-step hydrothermal-exfoliation assembly method is proposed as an effective electrocatalyst for NO2- to NH3 conversion. The introduction of POM with excellent redox ability tremendously increased the electrocatalytic performance of CoNi-LDH in the NO2RR process, causing P8W48/CoNi-LDH to exhibit large NH3 yield of 0.369 mmol h-1 mgcat-1 and exceptionally high Faradic efficiency of 97.0% at -1.3 V vs the Ag/AgCl reference electrode in 0.1 M phosphate buffer saline (PBS, pH = 7) containing 0.1 M NO2-. Furthermore, P8W48/CoNi-LDH demonstrated excellent durability during cyclic electrolysis. This work provides a new reference for the application of POM-based nanocomposites in the electrochemical reduction of NO2- to obtain value-added NH3.

Circ_0001495 influences the development of endometriosis through the miRNA-34c-5p/E2F3 axis.

Endometriosis is a chronic gynecological condition characterized by the presence of endometrial glands and stroma outside the uterine cavity., accounting for 7% of all female malignant tumors and 20%- 30% of malignant tumors of the female reproductive system. Multiple studies have shown that circular RNA (circRNA) has the potential to become a targeted target and marker for EM. However, the roles of circ_0001495 in EM are still unclear. Our research aims to reveal the molecular mechanism of circ_0001495 in EM. In this study, RT-PCR or western blot were conducted to determine mRNA and protein expression. cell viability, proliferation, migration, invasion, and apoptosis were assessed by CCK-8, EdU, wound healing, transwell, and flow cytometry analyses, respectively. Additionally, the targeting relationship between miR-34c-5p and circ_0001495 or E2F3 was confirmed through dual-luciferase reporter gene assay. We found significant overexpression of circ_0001495 in EM tissues and cells. Knockdown of circ_0001495 inhibited the proliferation, migration and invasion of ectopic endometrial stromal cells (EESCs) and increased cell apoptosis. Moreover, we found that circ_0001495 regulated E2F3 levels by interacting with miR-34c-5p in EESC. Furthermore, in vitro, miR-34c-5p inhibition or E2F3 overexpression could attenuate the effect of circ_0001495 silencing on EM progression. In addition, the vivo experiment demonstrated that inhibition of circ_0001495 could repress the development of endometriosis by regulating the miR-34c-5p/E2F3 axis. In conclusion, our study suggested that circ_0001495 promoted EM progression in vitro and in vivo through the miR-34c-5p/E2F3 axis, which might be a potential therapeutic target for EM.

Oxygen-Vacancy-Rich Monolayer BiO2- X Nanosheets for Bacterial Sepsis Management via Dual Physically Antibacterial and Chemically Anti-inflammatory Functions.

Sepsis is defined as a life-threatening organ dysfunction caused by a dysregulated host response to infection. Effective treatment of bacterial sepsis remains challenging due to the rapid progression of infection and the systemic inflammatory response. In this study, monolayer BiO2- X nanosheets (BiO2- X NSs) with oxygen-rich vacancies through sonication-assisted liquid-phase exfoliation are successfully synthesized. Herein, the BiO2- X NSs exhibit a novel nanozyme-enabled intervention strategy for the management of bacterial sepsis, based on its pH dependent dual antibacterial and anti-inflammatory functions. BiO2- X NSs exhibit effective antibacterial by utilizing oxidase (OXD)-like activity. Additionally, BiO2- X NSs can scavenge multiple reactive oxygen species (ROS) and mitigate systemic hyperinflammation by mimicking superoxide dismutase (SOD) and catalase (CAT). These dual capabilities of BiO2- X NSs allow them to address bacterial infection, proinflammatory cytokines secretion and ROS burst collaboratively, effectively reversing the progression of bacterial sepsis. In vivo experiments have demonstrated that BiO2- X NSs significantly reduce bacterial burden, attenuate systemic hyperinflammation, and rapidly rescued organ damage. Importantly, no obvious adverse effects are observed at the administered dose of BiO2- X NSs. This study presents a novel defect engineering strategy for the rational design of high-performance nanozymes and development of new nanomedicines for managing bacterial sepsis.

Transcriptome analysis reveals key genes and pathways for prickle development in Zanthoxylumarmatum.

Zanthoxylum armatum is an economically important tree species. However, well-developed prickles on its stems and leaves pose serious challenges in terms of management and harvesting. To investigate the molecular mechanism underlying prickle development, we sequenced different stages of prickle morphological development and transcriptomes of different tissues in the root tips (Gen), leaf buds (Ya), and fruits of Z. armatum. The results revealed that proteins related to cell division and genes related to the growth hormone signaling pathway were highly expressed in the prickle just protrusion (PC1). In addition, a high expression of lignin biosynthesis genes was observed during the developmental onset of lignification (PC2) and prickle lignification (PC3). These findings indicate that phenylpropanoid biosynthesis and plant hormone signal transduction are key pathways for the completion of lignification development in the prickle. During prickle development, ZaMYB2 and ZaWRKY3 were significantly upregulated in PC2 and PC3, suggesting their possible involvement in prickle development. Transcriptome and qRT-PCR analyses revealed differential gene expression of zaPAL3, za4CLL1, zaCOMT1, ZaWRKY3, and ZaCCD31 in the Gen, Ya, newly formed fruit (ZaF1), newly oil-spotted fruits (ZaF2), PC1, PC2, and PC3 of Zarmatum. zaCCD31 was highly expressed in leaf buds, whereas Za4CLL1 was highly expressed in root tips. During the lignification of prickles, the relative expression of genes including zaMYB2 increased gradually; however, the relative expression of zaCCD31 decreased during this process. Therefore, we inferred that these genes might be closely related to prickle development. Notably, zaMYB2 was expressed at higher levels in PC2 and PC3 than in PC1 and was not expressed in Gen, Ya, ZaF1, and ZaF2. Therefore, zaMYB2 is a key gene involved in prickle development of Z. armatum that exhibited tissue-specific expression. This study establishes a foundation for future analyses of the molecular mechanism underlying prickle development in Z. armatum.