Transforming the Niche: The Emerging Role of Extracellular Vesicles in Acute Myeloid Leukaemia Progression.

Acute myeloid leukaemia (AML) management remains a significant challenge in oncology due to its low survival rates and high post-treatment relapse rates, mainly attributed to treatment-resistant leukaemic stem cells (LSCs) residing in bone marrow (BM) niches. This review offers an in-depth analysis of AML progression, highlighting the pivotal role of extracellular vesicles (EVs) in the dynamic remodelling of BM niche intercellular communication. We explore recent advancements elucidating the mechanisms through which EVs facilitate complex crosstalk, effectively promoting AML hallmarks and drug resistance. Adopting a temporal view, we chart the evolving landscape of EV-mediated interactions within the AML niche, underscoring the transformative potential of these insights for therapeutic intervention. Furthermore, the review discusses the emerging understanding of endothelial cell subsets' impact across BM niches in shaping AML disease progression, adding another layer of complexity to the disease progression and treatment resistance. We highlight the potential of cutting-edge methodologies, such as organ-on-chip (OoC) and single-EV analysis technologies, to provide unprecedented insights into AML-niche interactions in a human setting. Leveraging accumulated insights into AML EV signalling to reconfigure BM niches and pioneer novel approaches to decipher the EV signalling networks that fuel AML within the human context could revolutionise the development of niche-targeted therapy for leukaemia eradication.

Surface modification of halide perovskite using EDTA-complexed SnO2 as electron transport layer in high performance solar cells.

The long-term performance of metal halide perovskite solar cells (PSCs) can be significantly improved by tuning the surface characteristics of the perovskite layers. Herein, low-temperature-processed ethylenediaminetetraacetic acid (EDTA)-complexed SnO2 (E-SnO2) is successfully employed as an electron transport layer (ETL) in PSCs, enhancing the efficiency and stability of the devices. The effects of EDTA treatment on SnO2 are investigated for different concentrations: comparing the solar cells' response with 15%-2.5% SnO2 and E-SnO2 based ETLs, and it was found that 7.5% E-SnO2 provided the best results. The improved surface properties of the perovskite layer on E-SnO2 are attributed to the presence of small amount of PbI2 which contributes to passivate the defects at the grain boundaries and films' surface. However, for the excess PbI2 based devices, photocurrent dropped, which could be attributed to the generation of shallow traps due to excess PbI2. The better alignment between the Fermi level of E-SnO2 and the conduction band of perovskite is another favorable aspect that enables increased open-circuit potential (VOC), from 0.82 V to 1.015 V, yielding a stabilized power conversion efficiency of 15.51%. This complex ETL strategy presented here demonstrates the enormous potential of E-SnO2 as selective contact to enhance the perovskite layer properties and thereby allow stable and high-efficiency PSCs.

Solar fuels design: Porous cathodes modeling for electrochemical carbon dioxide reduction in aqueous electrolytes.

The reduction of carbon dioxide emissions is crucial to reduce the atmospheric greenhouse effect, fighting climate change and global warming. Electrochemical CO2 reduction is one of the most promising carbon capture and utilization technologies, that can be powered by solar energy and used to make added-value chemicals and green fuels, providing grid-stability, energy security, and environmental benefits. A two-dimensional finite-elements model for porous electrodes was developed and validated against experimental data, allowing the design and performance improvement of a porous zinc cathode morphology and its operational conditions for an electrolyzer producing syngas via the co-electrolysis of CO2 and water. Porosity, pore length, fiber geometric shape, inlet pressure, system temperature, and catholyte flow rate were explored, and these parameters were thoroughly tuned by using the smart-search Nelder-Mead's multi-parameter optimization algorithm to achieve pronouncedly higher, industrial-relevant current density values than those previously reported, up to 263.6 mA/cm2 at an applied potential of -1.1 V vs. RHE.

MXene-Enhanced Nanoscale Photoconduction in Perovskite Solar Cells Revealed by Conductive Atomic Force Microscopy.

The use of MXene materials in perovskite solar cells (PSCs) has received significant interest due to their distinct features that result from the termination of functional groups and the oxidation of MXene. Herein, we have used photoconductive atomic force microscopy (pcAFM) to map the local (nanoscale) photovoltaic performances of the Ti3C2Tx MXene nanosheet-integrated TiO2 (MXene@TiO2) electron transport layer-based PSCs to determine the influence of the treatment on the microscopic charge flow inside the devices. At different applied voltages, the morphology and current have been simultaneously measured with nanoscale resolution from the top surfaces of the solar cells without back contacts. The PSCs based on MXene@TiO2 exhibit more enhanced current flow across the grains than the only TiO2-based PSCs. At zero applied bias, the average local photocurrent for MXene-integrated PSCs is several times higher than the reference PSCs and decreases gradually when the positive bias is increased until the open circuit voltage. Considerable differences were also observed in the short circuit current among different locations that appear identical in AFM topography. Our findings reveal the potential of MXene-integrated ETLs to enhance the nanoscale photoconduction and inherent characteristics of the active layers, thereby improving the performance of the polycrystalline photovoltaic devices.

On-table Extubation After Minimally Invasive Cardiac Surgery: A Retrospective Observational Pilot Study.

OBJECTIVE: To assess the safety of "on-table" extubation after minimally-invasive heart valve surgery. DESIGN: A single-center retrospective observational study. SETTING: At a tertiary referral academic hospital. PARTICIPANTS: Patients who underwent nonemergent isolated heart valve surgery through a minithoracotomy approach between January 2016 and August 2021. INTERVENTION: All patients were treated by 1 of the 6 cardiac anesthesiologists of the hospital. Only some of them practiced "on-table" extubation, and the outcome of patients extubated "on-table" was compared to those extubated in the intensive care unit (ICU). MEASUREMENT AND MAIN RESULTS: The primary outcome was the occurrence of any postoperative respiratory complication during the entire hospital stay. Secondary outcomes included the use of inotropes and vasopressors, de novo atrial fibrillation, and lengths of stay in the ICU and the hospital. A total of 294 patients met inclusion criteria, of whom 186 (63%) were extubated "on-table." Cardiopulmonary bypass duration was significantly longer, and moderate intraoperative hypothermia was significantly more frequent in patients extubated in the ICU. After adjustment for these confounders and for the European System for Cardiac Operative Risk Evaluation (EuroSCORE) II using a multivariate logistic model, no association was found between the extubation strategy and postoperative pulmonary complications (adjusted odds ratio = 0.84; 95% CI = 0.40-1.77; p = 0.64). "On-table" extubation was associated with a lower risk of postoperative pneumonia and fewer vasopressors requirements. CONCLUSION: "On-table" extubation was not associated with an increased incidence of respiratory complications. A randomized controlled trial is warranted to confirm these results and determine whether "on-table" extubation offers additional benefits.

Development and Validation of a Prediction Score for Low-Cardiac-Output Syndrome After Adult Cardiac Surgery.

OBJECTIVES: The authors aimed to develop a simple prediction score to help identify patients at high risk of low-cardiac-output syndrome after adult cardiac surgery. DESIGN: A single-center, retrospective, observational study. SETTING: At a tertiary hospital. PARTICIPANTS: Adult patients who underwent on-pump cardiac surgery between April 2016 and March 2021. INTERVENTION: None. MEASUREMENTS AND MAIN RESULTS: Among the 2,806 patients retained for final analyses, 355 (12.7%) developed low-cardiac-output syndrome. Using a stepwise backward variable selection procedure applied to a multivariate logistic regression, a prediction model, including 8 risk factors, could be identified-preoperative left ventricular ejection fraction, glomerular filtration rate <60 mL/min according to the Cockcroft formula or preoperative dialysis, combined surgery, nonelective surgery, mitral valve surgery for mitral valve regurgitation, history of extracardiac arteriopathy, preoperative hemoglobin <13 g/dL, and New York Heart Association functional class III or IV. A clinical prediction score was derived from the regression coefficients. The model had a good discriminative ability, with an area under the receiver operating characteristics curve of 0.8 (95% CI: 077-0.84). Using a threshold value of 5, the score had a 68% sensitivity, 79% specificity, a positive-predictive value of 33%, and a negative-predictive value of 94%. These results were validated on a validation sample using the bootstrap resampling technique. CONCLUSIONS: The authors developed a clinical score to facilitate the prediction of low- cardiac-output syndrome after adult cardiac surgery. This could help tailor patient management by contributing to the early identification of those at high risk of postoperative low cardiac output.

Parylene-Sealed Perovskite Nanocrystals Down-Shifting Layer for Luminescent Spectral Matching in Thin Film Photovoltaics.

The present contribution aims to enhance solar cells' performance via the development of advanced luminescent down-shifting based on encapsulated nanostructured perovskite materials. Here, thin films of inorganic lead halide (CsPbBr3) perovskite nanocrystal luminophores were synthetized, by hot-injection, deposited on glass substrates by spin-coating, and encapsulated with parylene type C, via chemical vapor deposition, to protect and stabilize the films. The optical properties of these thin films were characterized by absorption, emission and 2D contour spectra, their structure by X-ray diffraction and X-ray photoelectron spectroscopy, and the morphology by Scanning Transmission Electron microscopy. I-V curve and spectral response nanocrystalline silicon photovoltaic (nc-Si:H PV) cells were studied in the absence and presence of the perovskite and parylene luminescent down-shifting layers. The incorporation of the CsPbBr3 nanocrystals and their encapsulation with the parylene type C polymeric coating led to an increase in the current generated and the spectral response of the PV cells in the regime of the nanocrystals' fluorescence emission. A 3.1% increase in the short circuit current density and a 5.6% increase in the power conversion efficiency were observed.

Copper-Arsenic-Sulfide Thin-Films from Local Raw Materials Deposited via RF Co-Sputtering for Photovoltaics.

The inexorable increase of energy demand and the efficiency bottleneck of monocrystalline silicon solar cell technology is promoting the research and development of alternative photovoltaic materials. Copper-arsenic-sulfide (CAS) compounds are still rather unexplored in the literature, yet they have been regarded as promising candidates for use as p-type absorber in solar cells, owing to their broad raw material availability, suitable bandgap and high absorption coefficient. Here, a comprehensive study is presented on the structural and optoelectronic properties of CAS thin-films deposited via radio-frequency magnetron co-sputtering, using a commercial Cu target together with a Cu-As-S target with material obtained from local resources, specifically from mines in the Portuguese region of the Iberian Pyrite Belt. Raman and X-ray diffraction analysis confirm that the use of two targets results in films with pronounced stoichiometry gradients, suggesting a transition from amorphous CAS compounds to crystalline djurleite (Cu31S16), with the increasing proximity to the Cu target. Resistivity values from 4.7 mΩ·cm to 17.4 Ω·cm are obtained, being the lowest resistive films, those with pronounced sub-bandgap free-carrier absorption. The bandgap values range from 2.20 to 2.65 eV, indicating promising application as wide-bandgap semiconductors in third-generation (e.g., multi-junction) photovoltaic devices.

The Dynamics of Patient Visits to a Public Hospital Pediatric Emergency Department: A Time-Series Model.

BACKGROUND: The overcrowding of emergency departments (EDs) is an increasingly relevant public health problem. The main aims of this study were to identify and analyze temporal periodicities of a self-referred pediatric ED (PED), correlate them with meteorological and calendar variables and build a robust forecasting model. METHODS: An 8-year administrative data set (2010-2017) of the daily number of admissions to the PED of a public hospital in Lisbon, Portugal, was used (n = 670,379). A time-series model of the daily number of visits was built, including temporal periodicities, the Portuguese school calendar, and a meteorological comfort index (humidex). RESULTS: Several temporal cycles were identified: 1 year (peak in January/February related to respiratory infections in younger children and infants), 6 months (peaks in May and October with an increase in the admissions of older children and adolescents with trauma, gastrointestinal infections and atopic symptoms), 4 months (related to annual school vacations), 1 week (lower admission values on Saturday), and half a week (low from Friday to Monday morning). School calendar and humidex were significantly correlated with daily admissions. The model yielded a mean absolute percentage error of 10.7% ± 1.10% when cross-validation was performed for the full data set. CONCLUSION: Although PED visits are multifactorial, they may be predicted and explained by a relatively small number of variables. Such a model may be easily reproduced in different settings and represents a relevant tool to improve quality in EDs through correctly adapting human resources to ED demand.

Colloidal Lithography for Photovoltaics: An Attractive Route for Light Management.

The pursuit of ever-more efficient, reliable, and affordable solar cells has pushed the development of nano/micro-technological solutions capable of boosting photovoltaic (PV) performance without significantly increasing costs. One of the most relevant solutions is based on light management via photonic wavelength-sized structures, as these enable pronounced efficiency improvements by reducing reflection and by trapping the light inside the devices. Furthermore, optimized microstructured coatings allow self-cleaning functionality via effective water repulsion, which reduces the accumulation of dust and particles that cause shading. Nevertheless, when it comes to market deployment, nano/micro-patterning strategies can only find application in the PV industry if their integration does not require high additional costs or delays in high-throughput solar cell manufacturing. As such, colloidal lithography (CL) is considered the preferential structuring method for PV, as it is an inexpensive and highly scalable soft-patterning technique allowing nanoscopic precision over indefinitely large areas. Tuning specific parameters, such as the size of colloids, shape, monodispersity, and final arrangement, CL enables the production of various templates/masks for different purposes and applications. This review intends to compile several recent high-profile works on this subject and how they can influence the future of solar electricity.

Optimal-Enhanced Solar Cell Ultra-thinning with Broadband Nanophotonic Light Capture.

Recent trends in photovoltaics demand ever-thin solar cells to allow deployment in consumer-oriented products requiring low-cost and mechanically flexible devices. For this, nanophotonic elements in the wave-optics regime are highly promising, as they capture and trap light in the cells' absorber, enabling its thickness reduction while improving its efficiency. Here, novel wavelength-sized photonic structures were computationally optimized toward maximum broadband light absorption. Thin-film silicon cells were the test bed to determine the best performing parameters and study their optical effects. Pronounced photocurrent enhancements, up to 37%, 27%, and 48%, respectively, in ultra-thin (100- and 300-nm-thick) amorphous, and thin (1.5-?m) crystalline silicon cells are demonstrated with honeycomb arrays of semi-spheroidal dome or void-like elements patterned on the cells' front. Also importantly, key advantages in the electrical performance are anticipated, since the photonic nano/micro-nanostructures do not increase the cell roughness, therefore not contributing to recombination, which is a crucial drawback in state-of-the-art light-trapping approaches.

The unprecedented 2014 Legionnaires' disease outbreak in Portugal: atmospheric driving mechanisms.

A large outbreak of Legionnaires' disease occurred in November 2014 nearby Lisbon, Portugal. This epidemic infected 377 individuals by the Legionella pneumophila bacteria, resulting in 14 deaths. The primary source of transmission was contaminated aerosolized water which, when inhaled, lead to atypical pneumonia. The unseasonably warm temperatures during October 2014 may have played a role in the proliferation of Legionella species in cooling tower systems. The episode was further exacerbated by high relative humidity and a thermal inversion which limited the bacterial dispersion. Here, we analyze if the Legionella outbreak event occurred during a situation of extreme potential recirculation and/or stagnation characteristics. In order to achieve this goal, the Allwine and Whiteman approach was applied for a hindcast simulation covering the affected area during a near 20-year long period (1989-2007) and then for an independent period covering the 2014 event (15 October to 13 November 2014). The results regarding the average daily critical transport indices for the 1989-2007 period clearly indicate that the airshed is prone to stagnation as these events have a dominant presence through most of the study period (42%), relatively to the occurrence of recirculation (18%) and ventilation (17%) events. However, the year of 2014 represents an exceptional year when compared to the 1989-2007 period, with 53 and 33% of the days being classified as under stagnation and recirculation conditions, respectively.

Stronger at Depth: Jamming Grippers as Deep Sea Sampling Tools.

In this work we experimentally demonstrate (a) that the holding strength of universal jamming grippers increases as a function of the jamming pressure to greater than three atmospheres, and (b) that jamming grippers can be operated in the deep sea in ambient pressures exceeding one hundred atmospheres, where such high jamming pressures can be readily achieved. Laboratory experiments in a pressurized, water-filled test cell are used to measure the holding force of a "universal" style jamming gripper as a function of the pressure difference between internal membrane pressure and ambient pressure. Experiments at sea are used to demonstrate that jamming grippers can be installed on, and operated from, remotely operated vehicles at depths in excess of 1200 m. In both experiments, the jamming gripper consists of a latex balloon filled with a mixture of fresh water and ∼200 µm glass beads, which are cheaply available in large quantities as sand blasting media. The use of a liquid, rather than a gas, as the fluid media allows operation of the gripper with a closed-loop fluid system; jamming pressure is controlled with an electrically driven water hydraulic cylinder in the laboratory and with an oil hydraulic-driven large-bore water hydraulic cylinder at sea.

Experimental quantification of useful and parasitic absorption of light in plasmon-enhanced thin silicon films for solar cells application.

A combination of photocurrent and photothermal spectroscopic techniques is applied to experimentally quantify the useful and parasitic absorption of light in thin hydrogenated microcrystalline silicon (µc-Si:H) films incorporating optimized metal nanoparticle arrays, located at the rear surface, for improved light trapping via resonant plasmonic scattering. The photothermal technique accounts for the total absorptance and the photocurrent signal accounts only for the photons absorbed in the µc-Si:H layer (useful absorptance); therefore, the method allows for independent quantification of the useful and parasitic absorptance of the plasmonic (or any other) light trapping structure. We demonstrate that with a 0.9 µm thick absorber layer the optical losses related to the plasmonic light trapping in the whole structure are insignificant below 730 nm, above which they increase rapidly with increasing illumination wavelength. An average useful absorption of 43% and an average parasitic absorption of 19% over 400-1100 nm wavelength range is measured for µc-Si:H films deposited on optimized self-assembled Ag nanoparticles coupled with a flat mirror (plasmonic back reflector). For this sample, we demonstrate a significant broadband enhancement of the useful absorption resulting in the achievement of 91% of the maximum theoretical Lambertian limit of absorption.

Broadband light trapping in thin film solar cells with self-organized plasmonic nano-colloids.

The intense light scattered from metal nanoparticles sustaining surface plasmons makes them attractive for light trapping in photovoltaic applications. However, a strong resonant response from nanoparticle ensembles can only be obtained if the particles have monodisperse physical properties. Presently, the chemical synthesis of colloidal nanoparticles is the method that produces the highest monodispersion in geometry and material quality, with the added benefits of being low-temperature, low-cost, easily scalable and of allowing control of the surface coverage of the deposited particles. In this paper, novel plasmonic back-reflector structures were developed using spherical gold colloids with appropriate dimensions for pronounced far-field scattering. The plasmonic back reflectors are incorporated in the rear contact of thin film n-i-p nanocrystalline silicon solar cells to boost their photocurrent generation via optical path length enhancement inside the silicon layer. The quantum efficiency spectra of the devices revealed a remarkable broadband enhancement, resulting from both light scattering from the metal nanoparticles and improved light incoupling caused by the hemispherical corrugations at the cells' front surface formed from the deposition of material over the spherically shaped colloids.

Highly efficient nanoplasmonic SERS on cardboard packaging substrates.

This work reports on highly efficient surface enhanced Raman spectroscopy (SERS) constructed on low-cost, fully recyclable and highly reproducible cardboard plates, which are commonly used as disposable packaging material. The active optical component is based on plasmonic silver nanoparticle structures separated from the metal surface of the cardboard by a nanoscale dielectric gap. The SERS response of the silver (Ag) nanoparticles of various shapes and sizes were systematically investigated, and a Raman enhancement factor higher than 106 for rhodamine 6G detection was achieved. The spectral matching of the plasmonic resonance for maximum Raman enhancement with the optimal local electric field enhancement produced by 60 nm-sized Ag NPs predicted by the electromagnetic simulations reinforces the outstanding results achieved. Furthermore, the nanoplasmonic SERS substrate exhibited high reproducibility and stability. The SERS signals showed that the intensity variation was less than 5%, and the SERS performance could be maintained for up to at least 6 months.

Broadband photocurrent enhancement in a-Si:H solar cells with plasmonic back reflectors.

Plasmonic light trapping in thin film silicon solar cells is a promising route to achieve high efficiency with reduced volumes of semiconductor material. In this paper, we study the enhancement in the opto-electronic performance of thin a-Si:H solar cells due to the light scattering effects of plasmonic back reflectors (PBRs), composed of self-assembled silver nanoparticles (NPs), incorporated on the cells' rear contact. The optical properties of the PBRs are investigated according to the morphology of the NPs, which can be tuned by the fabrication parameters. By analyzing sets of solar cells built on distinct PBRs we show that the photocurrent enhancement achieved in the a-Si:H light trapping window (600 - 800 nm) stays in linear relation with the PBRs diffuse reflection. The best-performing PBRs allow a pronounced broadband photocurrent enhancement in the cells which is attributed not only to the plasmon-assisted light scattering from the NPs but also to the front surface texture originated from the conformal growth of the cell material over the particles. As a result, remarkably high values of J(sc) and V(oc) are achieved in comparison to those previously reported in the literature for the same type of devices.

Colloidal plasmonic back reflectors for light trapping in solar cells.

A novel type of plasmonic light trapping structure is presented in this paper, composed of metal nanoparticles synthesized in colloidal solution and self-assembled in uniform long-range arrays using a wet-coating method. The high monodispersion in size and spherical shape of the gold colloids used in this work allows a precise match between their measured optical properties and electromagnetic simulations performed with Mie theory, and enables the full exploitation of their collective resonant plasmonic behavior for light-scattering applications. The colloidal arrays are integrated in plasmonic back reflector (PBR) structures aimed for light trapping in thin film solar cells. The PBRs exhibit high diffuse reflectance (up to 75%) in the red and near-infrared spectrum, which can pronouncedly enhance the near-bandgap photocurrent generated by the cells. Furthermore, the colloidal PBRs are fabricated by low-temperature (<120 °C) processes that allow their implementation, as a final step of the cell construction, in typical commercial thin film devices generally fabricated in a superstrate configuration.

Self-organized colloidal quantum dots and metal nanoparticles for plasmon-enhanced intermediate-band solar cells.

A colloidal deposition technique is presented to construct long-range ordered hybrid arrays of self-assembled quantum dots and metal nanoparticles. Quantum dots are promising for novel opto-electronic devices but, in most cases, their optical transitions of interest lack sufficient light absorption to provide a significant impact in their implementation. A potential solution is to couple the dots with localized plasmons in metal nanoparticles. The extreme confinement of light in the near-field produced by the nanoparticles can potentially boost the absorption in the quantum dots by up to two orders of magnitude.In this work, light extinction measurements are employed to probe the plasmon resonance of spherical gold nanoparticles in lead sulfide colloidal quantum dots and amorphous silicon thin-films. Mie theory computations are used to analyze the experimental results and determine the absorption enhancement that can be generated by the highly intense near-field produced in the vicinity of the gold nanoparticles at their surface plasmon resonance.The results presented here are of interest for the development of plasmon-enhanced colloidal nanostructured photovoltaic materials, such as colloidal quantum dot intermediate-band solar cells.