ABSTRACT
It takes more than 20 years for normal colorectal mucosa to develop into metastatic carcinoma. The long time window provides a golden opportunity for early detection to terminate the malignant progression. Here, we aim to enable liquid biopsy of T1a stage colorectal cancer (CRC) and precancerous advanced adenoma (AA) by profiling circulating small extracellular vesicle (sEV)-derived RNAs. We exhibited a full RNA landscape for the circulating sEVs isolated from 60 participants. A total of 58,333 annotated RNAs were detected from plasma sEVs, among which 1,615 and 888 sEV-RNAs were found differentially expressed in plasma from T1a stage CRC and AA compared to normal controls (NC). Then we further categorized these sEV-RNAs into six modules by a weighted gene coexpression network analysis and constructed a 60-gene t-SNE model consisting of the top 10 RNAs of each module that could well distinguish T1a stage CRC/AA from NC samples. Some sEV-RNAs were also identified as indicators of specific endoscopic and morphological features of different colorectal lesions. The top-ranked biomarkers were further verified by RT-qPCR, proving that these candidate sEV-RNAs successfully identified T1a stage CRC/AA from NC in another cohort of 124 participants. Finally, we adopted different algorithms to improve the performance of RT-qPCR-based models and successfully constructed an optimized classifier with 79.3% specificity and 99.0% sensitivity. In conclusion, circulating sEVs of T1a stage CRC and AA patients have distinct RNA profiles, which successfully enable the detection of both T1a stage CRC and AA via liquid biopsy.
Subject(s)
Adenoma , Biomarkers, Tumor , Colorectal Neoplasms , Extracellular Vesicles , Humans , Colorectal Neoplasms/genetics , Colorectal Neoplasms/blood , Colorectal Neoplasms/pathology , Colorectal Neoplasms/diagnosis , Extracellular Vesicles/genetics , Extracellular Vesicles/metabolism , Adenoma/genetics , Adenoma/blood , Adenoma/pathology , Biomarkers, Tumor/blood , Biomarkers, Tumor/genetics , Male , Female , Middle Aged , Aged , Liquid Biopsy/methods , Precancerous Conditions/genetics , Precancerous Conditions/blood , Precancerous Conditions/pathology , Neoplasm StagingABSTRACT
Acute cutaneous lupus erythematosus (ACLE) is closely associated with systemic symptoms in systemic lupus erythematosus (SLE). This study aimed to identify potential biomarkers for ACLE and explore their association with SLE to enable early prediction of ACLE and identify potential treatment targets for the future. In total, 185 SLE-diagnosed patients were enrolled and categorized into two groups: those with ACLE and those without cutaneous involvement. After conducting logistic regression analysis of the differentiating factors, we concluded that tumor necrosis factor-alpha (TNF-α) is an independent risk factor for ACLE. Analysis of the receiver operating characteristic revealed an area under the curve of 0.716 for TNF-α. Additionally, both TNF-α and ACLE are positively correlated with disease activity. TNF-α shows promise as a biomarker for ACLE, and in SLE patients, ACLE may serve as a clear indicator of moderate-to-severe disease activity.
ABSTRACT
Methane emissions from ruminants significantly contribute to greenhouse gases. This study explores the methane mitigation effect and mechanism of S. mcclurei through in vitro rumen fermentation, aiming to establish its potential as a feed additive. We investigated the effects of freeze-dried and dried S. mcclurei at supplementation levels of 2%, 5%, and 10% of dry matter on nutrient degradation, ruminal fermentation, methane inhibition, and microbial community structure in in vitro rumen fermentation. The freeze-dried S. mcclurei at 2% supplementation significantly reduced CH4 emissions by 18.85% and enhanced crude protein degradability. However, total VFA and acetate concentrations were lower in both treatments compared to the control. The microbial shifts included a decrease in Lachnospiraceae_NK3A20_group and Ruminococcus and an increase in Selenomonas, Succinivibrio, and Saccharofermentans, promoting propionate production. Additionally, a significant reduction in Methanomicrobium was observed, indicating direct methane mitigation. Freeze-dried S. mcclurei at a 2% supplementation level shows potential as an effective methane mitigation strategy with minimal impact on rumen fermentation, supported by detailed insights into microbial community changes.
ABSTRACT
Poisson's ratio in auxetic materials shifts from typically positive to negative, causing lateral expansion during axial tension. This scale-independent characteristic, originating from tailored architectures, exhibits specific physical properties, including energy adsorption, shear resistance, and fracture resistance. These metamaterials demonstrate exotic mechanical properties with potential applications in several engineering fields, but biomedical applications seem to be one of the most relevant, with an increasing number of articles published in recent years, which present opportunities ranging from cellular repair to organ reconstruction with outstanding mechanical performance, mechanical conduction, and biological activity compared with traditional biomedical metamaterials. Therefore, focusing on understanding the potential of these structures and promoting theoretical and experimental investigations into the benefits of their unique mechanical properties is necessary for achieving high-performance biomedical applications. Considering the demand for advanced biomaterial implants in surgical technology and the profound advancement of additive manufacturing technology that are particularly relevant to fabricating complex and customizable auxetic mechanical metamaterials, this review focuses on the fundamental geometric configuration and unique physical properties of negative Poisson's ratio materials, then categorizes and summarizes auxetic material applications across some surgical departments, revealing efficacy in joint surgery, spinal surgery, trauma surgery, and sports medicine contexts. Additionally, it emphasizes the substantial potential of auxetic materials as innovative biomedical solutions in orthopedics and demonstrates the significant potential for comprehensive surgical application in the future.
Subject(s)
Biocompatible Materials , Orthopedic Procedures , Humans , Orthopedic Procedures/methods , Biocompatible Materials/therapeutic useABSTRACT
BACKGROUND: To compare the effects of proton pump inhibitor (PPI) and histamine-2 receptor antagonist (H2RA) use on the occurrence of acute kidney injury (AKI) in septic patients at high risk for developing stress ulcers. METHODS: Using the Medical Information Mart for Intensive Care IV version 2.2 database, septic patients with high-risk factors for stress ulcers (i.e., shock, coagulopathy, invasive mechanical ventilation, or chronic liver diseases) were included. Exposures included PPIs and H2RAs within 24 h of intensive care unit (ICU) admission or prior to ICU admission. The primary end point was severe sepsis-associated AKI as defined by the Kidney Disease Improving Global Outcomes criteria stage 3 (KDIGO-3). Propensity score matching (PSM) was performed to balance baseline characteristics. Multivariable Cox proportional hazards regression was used to estimate the effect size. RESULTS: 4731 PPI users and 4903 H2RA users were included. After PSM, there were 1785 pairs exposed to PPIs and H2RAs. In the PSM cohort, the cumulative incident KDIGO-3 rate was higher in the PPI group than in the H2RA group (log-rank test, p = 0.009). Regression analyses showed that PPI exposure [adjusted hazard ratio 1.32, 95% confidence interval (CI) 1.11-1.58, p = 0.002] was associated with incident KDIGO-3 compared with H2RA use. This association remained consistent in sensitivity analyses. Additionally, the PPI group had a higher need for kidney replacement therapy compared with the H2RA group (3.6% vs. 2.1%, P = 0.012). CONCLUSIONS: Among septic patients at high risk for developing stress ulcers, PPI exposure was associated with incident KDIGO-3 AKI compared with H2RA use.
Subject(s)
Acute Kidney Injury , Histamine H2 Antagonists , Proton Pump Inhibitors , Sepsis , Humans , Proton Pump Inhibitors/adverse effects , Proton Pump Inhibitors/administration & dosage , Proton Pump Inhibitors/therapeutic use , Histamine H2 Antagonists/therapeutic use , Histamine H2 Antagonists/adverse effects , Male , Female , Sepsis/complications , Middle Aged , Aged , Risk Factors , Intensive Care Units , Retrospective Studies , Propensity Score , Peptic Ulcer/complications , Peptic Ulcer/drug therapy , Cohort StudiesABSTRACT
The aim of this study was to assess the impact of varying proportions (5-20%) of hydroponic wheat sprouts in the diet of growing four-month-old Hu ewes on their productive performance, metabolic profiles, rumen fermentation, and alterations in microflora. Compared with the control group (CON), the optimum final weight of ewes has been presented in the group of substitution 15% (S15) of the basal diet with hydroponic wheat sprouts. Furthermore, 1-30 d the average daily gain (ADG), 31-60 d ADG, and average feed intake were both significantly improved in S15 compared with CON (p < 0.05). Feeding hydroponic wheat sprouts can significantly increase high-density lipoprotein and interleukin-2 (p < 0.05) accompanied by the numerical increase of the content of interferon-γ, suggesting its positive effect on ewes' health and immune systems. In this process, it is noteworthy that feeding hydroponic wheat sprouts results in an increase in relative abundance of Olsenella, Limosilactobacillus, Shuttleworthia, and Prevotella_7, and a decrease in relative abundance of Succinimonas, Pseudobutyrivibrio, and Anaerovibrio in the rumen of growing ewes. It implies that the response of rumen microflora adapted to the change of dietary ingredients, as well as the relationship between rumen microflora changes and the improvement of productive performance and immune system in growing ewes. Considering the usage cost and application effect, S15 of the basal diet with hydroponic wheat sprouts could be the appropriate application solution for growing ewes.
ABSTRACT
BACKGROUND: Primary nasal tuberculosis (TB) is a rare form of extrapulmonary TB, particularly in patients receiving anti-tumor necrosis factor (TNF) immunotherapy. As a result, its diagnosis remains challenging. CASE SUMMARY: A 58-year-old male patient presented to the ear, nose, and throat department with right-sided nasal obstruction and bloody discharge for 1 month. He was diagnosed with psoriatic arthritis and received anti-TNF immunotherapy for 3 years prior to presentation. Biopsy findings revealed chronic granulomatous inï¬ammation and a few acid-fast bacilli, suggestive of primary nasal TB. He was referred to our TB management department for treatment with oral anti-TB agents. After 9 months, the nasal lesions had disappeared. No recurrence was noted during follow-up. CONCLUSION: The diagnosis of primary nasal TB should be considered in patients receiving TNF antagonists who exhibit thickening and crusting of the nasal septum mucosa or inferior turbinate, particularly when pathological findings suggest granulomatous inflammation.
ABSTRACT
OBJECTIVE: Management of extensive acetabular bone defects in total hip arthroplasty (THA) remains challenging. This study aims to investigate the feasibility and preliminary outcomes of 3D-printed personalized porous acetabular components for the reconstruction of acetabular defects in primary THA. METHODS: This retrospective study involved seven patients who received 3D-printed acetabular components in primary THA between July 2018 and March 2021. Preoperatively, acetabular bone defects were evaluated by referencing the Paprosky classification. There were two "Paprosky type IIIA" defects and five "Paprosky type IIIB" defects. The acetabular components were custom-made for each patient to reconstruct the extensive acetabular defects. The hip function was assessed according to the Harris hip score (HHS). Clinical and radiographic outcomes were assessed. RESULTS: The average follow-up period was 40 months, ranging from 26 to 57 months. There were no patients lost to follow-up. The HHS improved from 44 (range: 33-53) before the operation to 88 (range: 79-93) at the final follow-up. Postoperative X-rays showed that the 3D-printed personalized components were properly fitted with the acetabulum. The average center of rotation (COR) discrepancy was 2.3 mm horizontally and 2.1 mm vertically, respectively. Tomosynthesis-Shimadzu metal artifact reduction technology images showed that the implant was in close contact with the host bone. Moreover, no complications were observed during the follow-up period, including loosening, dislocation, or component protrusion. CONCLUSION: The implantation of 3D-printed personalized acetabular components showed accurate reconstruction, stable mechanical support, and favorable function at short-term follow-up. This may be a viable alternative method for reconstructing extensive acetabular defects in THA.
Subject(s)
Acetabulum , Arthroplasty, Replacement, Hip , Hip Prosthesis , Printing, Three-Dimensional , Prosthesis Design , Humans , Arthroplasty, Replacement, Hip/methods , Acetabulum/surgery , Retrospective Studies , Female , Male , Middle Aged , Aged , Adult , Porosity , Feasibility StudiesABSTRACT
Bone tissue engineering has emerged as a pivotal field addressing the critical clinical needs of bone fractures. This study focused on developing multi-composite hydrogels by synergizing biocompatible GelMA macromolecules with synthetic PEGDA and reinforcing them with nanosilicates (SN). The incorporation of SN introduces crucial trace elements such as silicon, magnesium, and lithium, promoting both angiogenesis and osteogenesis. Characterizations revealed that PEGDA significantly reinforced the composite hydrogels' stability, while SN further enhanced the mechanical integrity of the GelMA-PEGDA-SN (GPS) hydrogels. Cell studies designated that GPS improved cell proliferation and migration, angiogenic VEGF/eNOS expression and osteogenic differentiation. In vivo experiments showed that GPS hydrogels effectively enhanced calvarial bone healing, with the GPS-2 formulation (2â¯% SN) displaying superior bone coverage and increased vascular formation. Assessments of osteogenic formation and the angiogenic marker CD31 validated the comprehensive bone regeneration potential of GPS hydrogels. These findings highlight the significant promise of GPS hydrogels in fostering bone healing with promoted angiogenesis.
ABSTRACT
The distal femur is one of the most common sites for primary bone tumors. As the tumor progresses and bone destruction worsens, it can severely affect knee function and even pose a threat to life. In cases where only one condyle is affected and requires resection, preserving the healthy contralateral condyle can substantially enhance the biomechanics of the knee. Furthermore, preserving bone stock may enable future salvage procedures in the event of initial surgery failure, be it from fractures or osteoarthritis. Distal femoral unicondyle resection can offer better functional outcomes in select cases. However, it is essential to prioritize oncological safety with adequate margins over short-term knee function. Currently, the primary methods for reconstruction after the excision of a unicondylar tumor include allograft transplantation (bi- or uni-condylar) and prosthetic or allograft-prosthesis composite replacement (APC). However, there is currently some controversy regarding the optimal surgical reconstruction method, and a consensus within the academic community has yet to be reached. Moreover, due to the rarity of bone tumors, extensive clinical data from a single center is limited. Current studies are mainly retrospective and single-center, lacking sufficient cases and follow-up duration. This article reviews surgical reconstruction after solitary condylar excision in distal femoral tumors. It summarizes, compares, and analyzes mainstream reconstruction methods, exploring their technical details and clinical outcomes to highlight their potential in bone oncology.
Subject(s)
Femoral Neoplasms , Humans , Femoral Neoplasms/surgery , Bone Transplantation/methods , Plastic Surgery Procedures/methods , Femur/surgeryABSTRACT
BACKGROUND: Talar malignant tumor is extremely rare. Currently, there are several alternative management options for talus malignant tumor including below-knee amputation, tibio-calcaneal arthrodesis, and homogenous bone transplant while their shortcomings limited the clinical application. Three-dimensional (3D) printed total talus prosthesis in talus lesion was reported as a useful method to reconstruct talus, however, most researches are case reports and its clinical effect remains unclear. Therefore, the current study was to explore the application of 3D printed custom-made modular prosthesis in talus malignant tumor. METHODS: We retrospectively analyzed the patients who received the 3D printed custom-made modular prosthesis treatment due to talus malignant tumor in our hospital from February 2016 to December 2021. The patient's clinical data such as oncology outcome, operation time, and volume of blood loss were recorded. The limb function was evaluated with the Musculoskeletal Tumor Society 93 (MSTS-93) score, The American Orthopedic Foot and Ankle Society (AOFAS) score; the ankle joint ranges of motion as well as the leg length discrepancy were evaluated. Plain radiography and Tomosynthesis-Shimadzu Metal Artefact Reduction Technology (T-SMART) were used to evaluate the position of prosthesis and the osseointegration. Postoperative complications were recorded. RESULTS: The average patients' age and the follow-up period were respectively 31.5 ± 13.1 years; and 54.8 months (range 26-72). The medium operation time was 2.4 ± 0.5 h; the intraoperative blood loss was 131.7 ± 121.4 ml. The mean MSTS-93 and AOFAS score was 26.8 and 88.5 respectively. The average plantar flexion, dorsiflexion, varus, and valgus were 32.5, 9.2, 10.8, and 5.8 degree respectively. One patient had delayed postoperative wound healing. There was no leg length discrepancy observed in any patient and good osseointegration was observed on the interface between the bone and talus prosthesis in all subjects. CONCLUSION: The modular structure of the prosthesis developed in this study seems to be convenient for prosthesis implantation and screws distribution. And the combination of solid and porous structure improves the initial stability and promotes bone integration. Therefore, 3D printed custom-made modular talus prosthesis could be an alternative option for talus reconstruction in talus malignant tumor patients.
Subject(s)
Bone Neoplasms , Printing, Three-Dimensional , Prosthesis Design , Talus , Humans , Talus/surgery , Talus/diagnostic imaging , Male , Adult , Female , Bone Neoplasms/surgery , Bone Neoplasms/diagnostic imaging , Retrospective Studies , Middle Aged , Young Adult , Prosthesis Implantation/methods , Prosthesis Implantation/instrumentation , Adolescent , Ankle Joint/surgery , Ankle Joint/diagnostic imaging , Osseointegration , Treatment Outcome , Range of Motion, Articular , Prostheses and ImplantsABSTRACT
PURPOSE: The spinopelvic reconstruction poses significant challenges following total sacrectomy in patients with malignant or aggressive benign bone tumours encompassing the entire sacrum. In this study, we aim to assess the functional outcomes and complications of an integrated 3D-printed sacral endoprostheses featuring a self-stabilizing design, eliminating the requirement for supplemental fixation. METHODS: We retrospectively analyzed patients with sacral tumours who underwent total sacrectomy followed by reconstruction with 3D-printed self-stabilizing endoprosthesis. Clinically, we evaluated functional outcomes using the 1993 version of the musculoskeletal tumour society (MSTS-93) score. Perioperative and postoperative complications were also documented. RESULTS: 10 patients met final inclusion criteria. The median age was 49 years (range, 31-64 years). The median follow-up time was 26.5 months (range, 15-47 months). Median postoperative functional MSTS-93 was 22.5 (range, 13-25). The median operation time was 399.5 min (305-576 min), and the median intraoperative blood loss was and 3200 ml (2400-7800 ml). Complications include wound dehiscence in one patient, bowel, bladder, and sexual dysfunction in four patients, cerebrospinal fluid leak in one patient, and tumour recurrence in one patient. There were no mechanical complications related to the endoprosthesis at the last follow-up. CONCLUSION: The utilization of 3D-printed self-stabilizing endoprosthesis proved to be a viable approach, yielding satisfactory short-term outcomes in patients undergoing total sacral reconstruction without supplemental fixation.
ABSTRACT
Rapid reduction of plasma triglycerides (TG) is believed to improve the outcome of pancreatitis in the context of hypertriglyceridaemia (HTG)-induced acute pancreatitis (HTG-AP). Previous studies have suggested that haemoperfusion (HP) with the Jafron cartridge series could be effective for reducing TG concentrations in patients with HTG-AP. However, the clearance capacity (CC) for TG removal has not been reported. This case series reports on data from three patients with HTG-AP who underwent HP with HA230 or HA330 cartridges. Blood samples were collected from both before and after the cartridge circuit every 30 min and the CC was calculated. Twelve pairs of blood samples were collected for each type of HP cartridge. The mean ± SD CC of the HA230 cartridge for TG removal in this case series was 0.009781 ± 1.117235 ml/min (95% confidence interval [CI], -0.7000762, 0.7196384 ml). The mean ± SD CC of the HA330 cartridge for TG removal in this case series was 0.344914 ± 1.412183 ml/min (95% CI, -0.5523448, 1.2421721 ml). Based on the findings of this small case series, special caution is advised when considering the use of the HA230 and HA330 cartridges for reducing blood TG concentration pending further conclusive evidence from larger studies.
Subject(s)
Hemoperfusion , Hypertriglyceridemia , Pancreatitis , Triglycerides , Humans , Hypertriglyceridemia/blood , Hypertriglyceridemia/complications , Hypertriglyceridemia/therapy , Pancreatitis/therapy , Pancreatitis/blood , Pancreatitis/etiology , Pancreatitis/diagnosis , Male , Hemoperfusion/methods , Triglycerides/blood , Middle Aged , Female , Adult , Acute Disease , AgedABSTRACT
Introduction: Desmoid fibromatosis is an aggressive fibroblastic neoplasm with a high propensity for local recurrence. Targeted therapy for Desmoid fibromatosis represents a novel avenue in systemic treatment. Anlotinib, a novel multitargeted angiogenesis inhibitor, represents a novel approach for targeted therapy. Therefore, this study aims to assess the efficacy and safety of anlotinib in patients with Desmoid fibromatosis. Methods: We retrospectively gathered the clinical medical records of Desmoid fibromatosis patients who underwent anlotinib treatment between June 2019 and November 2023 at our center. Anlotinib was initiated at a daily dose of 12 mg and adjusted based on drug-related toxicity. Tumor response was evaluated using the Response Evaluation Criteria in Solid Tumors 1.1 criteria. Progression-free survival served as the primary endpoint and was analyzed utilizing the Kaplan-Meier method. Results: In total, sixty-six consecutive patients were enrolled. No patients achieved a complete response; however, fourteen patients (21.21%) exhibited a partial response, while forty-six patients (70%) experienced disease stability. Progressive disease was observed in 6 patients (9.10%), and the progression-free survival rates at 12 and 36months were 89.71% and 82.81%, respectively. The disease control rate was 90.91%, while the objective response rate was 21.21%. Conclusion: Anlotinib proves effective in managing recurrent and symptomatic patients with Desmoid fibromatosis. However, the toxicity profile of anlotinib presents a higher risk of Hand-Foot Skin Reaction and hypertension. Therefore, given that 41.67% of patients were subjected to dose adjustments associated with the initial dose of 12 mg, implementing dosage reductions may help balance efficacy with side effects.
ABSTRACT
Reproduction in goats is a highly complex and dynamic process of life regulation, involving coordinated regulation from various aspects such as central nervous system regulation, reproductive system development, oocyte maturation, and fertilized egg development. In recent years, researchers have identified numerous genes associated with goat reproductive performance through high-throughput sequencing, single-cell sequencing, gene knockout, and other techniques. However, there is still an urgent need to explore marker genes related to goat reproductive performance. In this study, a single-cell RNA sequencing dataset of oocytes (GSE136005) was obtained from the Gene Expression Omnibus (GEO) database. Weighted Gene Co-expression Network Analysis (WGCNA) was utilized to identify modules highly correlated with goat litter size. Through gene function enrichment analysis, it was found that genes within the modules were mainly enriched in adhesive junctions, cell cycle, and other signaling pathways. Additionally, the top 30 hub genes with the highest connectivity in WGCNA were identified. Subsequently, using Protein-Protein Interaction (PPI) network analysis, the top 30 genes with the highest connectivity within the modules were identified. The intersection of hub genes, key genes in the PPI network, and differentially expressed genes (DEGs) led to the identification of the RPL4 gene as a key marker gene associated with reproductive capacity in goat oocytes. Overall, our study reveals that the RPL4 gene in oocytes holds promise as a biological marker for assessing goat litter size, deepening our understanding of the regulatory mechanisms underlying goat reproductive performance.
ABSTRACT
BACKGROUND: Customized 3D-printed pelvic implants with a porous structure have revolutionized periacetabular pelvic defect reconstruction after tumor resection, offering improved osteointegration, long-term stability, and anatomical fit. However, the lack of an established classification system hampers implementation and progress. METHODS: We formulated a novel classification system based on pelvic defect morphology and 3D-printed hemipelvis endoprostheses. It integrates surgical approach, osteotomy guide plate and prosthesis design, postoperative rehabilitation plans, and perioperative processes. RESULTS: Retrospectively analyzing 60 patients (31 males, 29 females), we classified them into Type A (15 patients: Aa = 6, Ab = 9), Type B (27 patients: Ba = 15, Bb = 12), Type C (17 patients). All underwent customized osteotomy guide plate-assisted tumor resection and 3D-printed hemipelvic endoprosthesis reconstruction. Follow-up duration was median 36.5 ± 15.0 months (range, 6 to 74 months). The mean operating time was 430.0 ± 106.7 min, intraoperative blood loss 2018.3 ± 1305.6 ml, transfusion volume 2510.0 ± 1778.1 ml. Complications occurred in 13 patients (21.7%), including poor wound healing (10.0%), deep prosthesis infection (6.7%), hip dislocation (3.3%), screw fracture (1.7%), and interface loosening (1.7%). VAS score improved from 5.5 ± 1.4 to 1.7 ± 1.3, MSTS-93 score from 14.8 ± 2.5 to 23.0 ± 5.6. Implant osseointegration success rate was 98.5% (128/130), with one Type Ba patient experiencing distal prosthesis loosening. CONCLUSION: The West China classification may supplement the Enneking and Dunham classification, enhancing interdisciplinary communication and surgical outcomes. However, further validation and wider adoption are required to confirm clinical effectiveness.
Subject(s)
Acetabulum , Bone Neoplasms , Printing, Three-Dimensional , Prosthesis Design , Humans , Female , Male , Retrospective Studies , Adult , Middle Aged , Acetabulum/surgery , Acetabulum/diagnostic imaging , Bone Neoplasms/surgery , Bone Neoplasms/diagnostic imaging , Young Adult , Osteotomy/methods , Plastic Surgery Procedures/methods , Plastic Surgery Procedures/instrumentation , Adolescent , Aged , Treatment Outcome , Postoperative Complications/etiology , Follow-Up Studies , Pelvic Bones/surgery , Pelvic Bones/diagnostic imagingABSTRACT
BACKGROUND: Helicobacter pylori (H. pylori) is the predominant etiological agent of gastritis and disrupts the integrity of the gastric mucosal barrier through various pathogenic mechanisms. After H. pylori invades the gastric mucosa, it interacts with immune cells in the lamina propria. Macrophages are central players in the inflammatory response, and H. pylori stimulates them to secrete a variety of inflammatory factors, leading to the chronic damage of the gastric mucosa. Therefore, the study aims to explore the mechanism of gastric mucosal injury caused by inflammatory factors secreted by macrophages, which may provide a new mechanism for the development of H. pylori-related gastritis. METHODS: The expression and secretion of CCL3 from H. pylori infected macrophages were detected by RT-qPCR, Western blot and ELISA. The effect of H. pylori-infected macrophage culture medium and CCL3 on gastric epithelial cells tight junctions were analyzed by Western blot, immunofluorescence and transepithelial electrical resistance. EdU and apoptotic flow cytometry assays were used to detect cell proliferation and apoptosis levels. Dual-luciferase reporter assays and chromatin immunoprecipitation assays were used to study CCL3 transcription factors. Finally, gastric mucosal tissue inflammation and CCL3 expression were analyzed by hematoxylin and eosin staining and immunohistochemistry. RESULTS: After H. pylori infection, CCL3 expressed and secreted from macrophages were increased. H. pylori-infected macrophage culture medium and CCL3 disrupted gastric epithelial cells tight junctions, while CCL3 neutralizing antibody and receptor inhibitor of CCL3 improved the disruption of tight junctions between cells. In addition, H. pylori-infected macrophage culture medium and CCL3 recombinant proteins stimulated P38 phosphorylation, and P38 phosphorylation inhibitor improved the disruption of tight junctions between cells. Besides, it was identified that STAT1 was a transcription factor of CCL3 and H. pylori stimulated macrophage to secret CCL3 through the JAK1-STAT1 pathway. Finally, after mice were injected with murine CCL3 recombinant protein, the gastric mucosal injury and inflammation were aggravated, and the phosphorylation level of P38 was increased. CONCLUSIONS: In summary, our findings demonstrate that H. pylori infection stimulates macrophages to secrete CCL3 via the JAK1-STAT1 pathway. Subsequently, CCL3 damages gastric epithelial tight junctions through the phosphorylation of P38. This may be a novel mechanism of gastric mucosal injury in H. pylori-associated gastritis.
Subject(s)
Chemokine CCL3 , Gastric Mucosa , Helicobacter Infections , Helicobacter pylori , Macrophages , Helicobacter pylori/physiology , Chemokine CCL3/metabolism , Chemokine CCL3/genetics , Animals , Gastric Mucosa/metabolism , Gastric Mucosa/pathology , Gastric Mucosa/microbiology , Macrophages/metabolism , Macrophages/microbiology , Mice , Helicobacter Infections/metabolism , Helicobacter Infections/pathology , Homeostasis , Mice, Inbred C57BL , Humans , Apoptosis , Cell Proliferation , Male , RAW 264.7 CellsABSTRACT
BACKGROUND: Retroperitoneal liposarcoma (RPLS) is known for its propensity for local recurrence and short survival time. We aimed to identify a credible and specific prognostic biomarker for RPLS. METHODS: Cases from The Cancer Genome Atlas (TCGA) sarcoma dataset were included as the training group. Co-expression modules were constructed using weighted gene co-expression network analysis (WGCNA) to explore associations between modules and survival. Survival analysis of hub genes was performed using the Kaplan-Meier method. In addition, independent external validation was performed on a cohort of 135 Chinese RPLS patients from the REtroperitoneal SArcoma Registry (RESAR) study (NCT03838718). RESULTS: A total of 19 co-expression modules were constructed based on the expression levels of 26,497 RNAs in the TCGA cohort. Among these modules, the green module exhibited a positive correlation with overall survival (OS, p = 0.10) and disease-free survival (DFS, p = 0.06). Gene set enrichment analysis showed that the green module was associated with endocytosis and soft-tissue sarcomas. Survival analysis demonstrated that NINJ1, a hub gene within the green module, was positively associated with OS (p = 0.019) in the TCGA cohort. Moreover, in the validation cohort, patients with higher NINJ1 expression levels displayed a higher probability of survival for both OS (p = 0.023) and DFS (p = 0.012). Multivariable Cox analysis further confirmed the independent prognostic significance of NINJ1. CONCLUSIONS: We here provide a foundation for the establishment of a consensus prognostic biomarker for RPLS, which should not only facilitate medical treatment but also guide the development of novel targeted drugs.
ABSTRACT
PURPOSE: Resection of pelvic bone tumours and subsequent pelvic girdle reconstruction pose formidable challenges due to the intricate anatomy, weight-bearing demands, and significant defects. 3D-printed implants have improved pelvic girdle reconstruction by enabling precise resections with customized guides, offering tailored solutions for diverse bone defect morphology, and integrating porous surface structures to promote osseointegration. Our study aims to evaluate the long-term efficacy and feasibility of 3D-printed hemipelvic reconstruction following resection of malignant pelvic tumours. METHODS: A retrospective review was conducted on 96 patients with primary pelvic malignancies who underwent pelvic girdle reconstruction using 3D-printed custom hemipelvic endoprostheses between January 2017 and May 2022. Follow-up duration was median 48.1 ± 17.9 months (range, 6 to 76 months). Demographic data, imaging examinations, surgical outcomes, and oncological evaluations were extracted and analyzed. The primary endpoints included oncological outcomes and functional status assessed by the Musculoskeletal Tumor Society (MSTS-93) score. Secondary endpoints comprised surgical duration, intraoperative bleeding, pain control and complications. RESULTS: In 96 patients, 70 patients (72.9%) remained disease-free, 15 (15.6%) had local recurrence, and 11 (11.4%) succumbed to metastatic disease. Postoperatively, function improved with MSTS-93 score increasing from 12.2 ± 2.0 to 23.8 ± 3.8. The mean operating time was 275.1 ± 94.0 min, and the mean intraoperative blood loss was 1896.9 ± 801.1 ml. Pain was well-managed, resulting in substantial improvements in VAS score (5.3 ± 1.8 to 1.4 ± 1.1). Complications occurred in 13 patients (13.5%), including poor wound healing (6.3%), deep prosthesis infection (4.2%), hip dislocation (2.1%), screw fracture (1.0%), and interface loosening (1.0%). Additionally, all patients achieved precise implantation of customized prosthetics according to preoperative plans. T-SMART revealed excellent integration at the prosthesis-bone interface for all patients. CONCLUSION: The use of a 3D-printed custom hemipelvic endoprosthesis, characterized by anatomically designed contours and a porous biomimetic surface structure, offers a potential option for pelvic girdle reconstruction following internal hemipelvectomy in primary pelvic tumor treatment. Initial results demonstrate stable fixation and satisfactory mid-term functional and radiographic outcomes.