Magnetically actuated glaucoma drainage device for regulating intraocular pressure after implantation.

The key risk factor for glaucoma is increased intraocular pressure (IOP). Glaucoma drainage devices implanted in the eye can reduce IOP and thus stop disease progression. However, most devices currently used in clinical practice are passive and do not allow for postsurgical IOP control, which may result in serious complications such as hypotony (i.e., excessively low IOP). To enable noninvasive IOP control, we demonstrate a novel, miniature glaucoma implant that will enable the repeated adjustment of the hydrodynamic resistance after implantation. This is achieved by integrating a magnetic microvalve containing a micropencil-shaped plug that is moved using an external magnet, thereby opening or closing fluidic channels. The microplug is made from biocompatible poly(styrene-block-isobutylene-block-styrene) (SIBS) containing iron microparticles. The complete implant consists of an SIBS drainage tube and a housing element containing the microvalve and fabricated with hot embossing using femtosecond laser-machined glass molds. Using in vitro and ex vivo microfluidic experiments, we demonstrate that when the microvalve is closed, it can provide sufficient hydrodynamic resistance to overcome hypotony. Valve function is repeatable and stable over time. Due to its small size, our implant is a promising, safe, easy-to-implant, minimally invasive glaucoma surgery device.

The Development of a SIBS Shunt to Treat Glaucoma.

Many pharmaceutical and medical device start-up companies share similar goals. Each experience is different and offers important lessons for companies seeking Food and Drug Administration approval. This article offers important advice for budding entrepreneurs as it discusses some career-altering decisions, lessons learned in the start-up world, the technology leading up to innovation, the relevant science, medicine, chemistry, and engineering, the need to develop novel biomaterials, the regulatory path, and the business process culminating in the development of a Poly(styrene-block-isobutylene-block-Styrene)-based microshunt to treat glaucoma that led to the founding of InnFocus, Inc. (Miami, FL) in 2004, and then the acquisition of InnFocus by Santen Pharmaceuticals (Osaka, Japan) in 2016.

A Degradable Sustained-Release Drug Delivery System for Bleb-Forming Glaucoma Surgery.

Fibrosis of the filtering bleb is one of the main causes of failure after bleb-forming glaucoma surgery. Intraoperative application of mitomycin C (MMC) is the current gold standard to reduce the fibrotic response. However, MMC is cytotoxic and one-time application is often insufficient. A sustained-release drug delivery system (DDS), loaded with MMC, may be less cytotoxic and equally or more effective. Two degradable (polycaprolactone (PCL) and polylactic-co-glycolic acid (PLGA)) MMC-loaded DDSs are developed. Release kinetics are first assessed in vitro followed by rabbit implants in conjunction with the PRESERFLO MicroShunt. As a control, the MicroShunt is implanted with adjunctive use of a MMC solution. Rabbits are euthanized at postoperative day (POD) 28 and 90. The PLGA and PCL DDSs release (on average) 99% and 75% of MMC, respectively. All groups show functioning blebs until POD 90. Rabbits implanted with a DDS show more inflammation with avascular thin-walled blebs when compared to the control. However, collagen is more loosely arranged. The PLGA DDS shows less inflammation, less foreign body response (FBR), and more complete degradation at POD 90 when compared to the PCL DDS. Further optimization with regard to dosage is required to reduce side effects to the conjunctiva.

The Influence of Design Modifications and Microstructured Surface Topographies on Bleb Survival after Glaucoma Tube Shunt Implantation.

Lowering intraocular pressure (IOP) by placement of a glaucoma shunt is an effective treatment for glaucoma. However, fibrosis of the outflow site can hamper surgical outcome. In this study, the antifibrotic effect of adding an endplate (with or without microstructured surface topographies) to a microshunt made of poly(styrene-block-isobutylene-block-styrene) is investigated. New Zealand white rabbits are implanted with a control implant (without endplate) and modified implants. Afterward, bleb morphology and IOP is recorded for 30 days. After killing of the animals, eyes are collected for histology, Addition of an endplate extended bleb survival, Topography-990 has the longest recorded bleb-survival time. Histology reveals that the addition of an endplate increases the presence of myofibroblasts, macrophages, polymorphonuclear cells, and foreign body giant cells compared to the control. However, an increased capsule thickness and inflammatory response are observed in the groups with surface topographies, The addition of an endplate results in prolonged bleb survival, demonstrating that engineering of the shape of glaucoma implants could prolong bleb functionality. Future research should further elaborate the effect of surface topographies on long-term bleb survival, since an increased presence of pro-fibrotic cells and increased capsule thickness are observed compared to the control.

FP and EP2 prostanoid receptor agonist drugs and aqueous humor outflow devices for treating ocular hypertension and glaucoma.

Prostaglandin (PG) receptors represent important druggable targets due to the many diverse actions of PGs in the body. From an ocular perspective, the discovery, development, and health agency approvals of prostaglandin F (FP) receptor agonists (FPAs) have revolutionized the medical treatment of ocular hypertension (OHT) and glaucoma. FPAs, such as latanoprost, travoprost, bimatoprost, and tafluprost, powerfully lower and control intraocular pressure (IOP), and became first-line therapeutics to treat this leading cause of blindness in the late 1990s to early 2000s. More recently, a latanoprost-nitric oxide (NO) donor conjugate, latanoprostene bunod, and a novel FP/EP3 receptor dual agonist, sepetaprost (ONO-9054 or DE-126), have also demonstrated robust IOP-reducing activity. Moreover, a selective non-PG prostanoid EP2 receptor agonist, omidenepag isopropyl (OMDI), was discovered, characterized, and has been approved in the United States, Japan and several other Asian countries for treating OHT/glaucoma. FPAs primarily enhance uveoscleral (UVSC) outflow of aqueous humor (AQH) to reduce IOP, but cause darkening of the iris and periorbital skin, uneven thickening and elongation of eyelashes, and deepening of the upper eyelid sulcus during chronic treatment. In contrast, OMDI lowers and controls IOP by activation of both the UVSC and trabecular meshwork outflow pathways, and it has a lower propensity to induce the aforementioned FPA-induced ocular side effects. Another means to address OHT is to physically promote the drainage of the AQH from the anterior chamber of the eye of patients with OHT/glaucoma. This has successfully been achieved by the recent approval and introduction of miniature devices into the anterior chamber by minimally invasive glaucoma surgeries. This review covers the three major aspects mentioned above to highlight the etiology of OHT/glaucoma, and the pharmacotherapeutics and devices that can be used to combat this blinding ocular disease.

A model for designing intraocular pressure-regulating glaucoma implants.

Glaucoma is a group of eye conditions that damage the optic nerve, the health of which is vital for vision. The key risk factor for the development and progression of this disease is increased intraocular pressure (IOP). Implantable glaucoma drainage devices have been developed to divert aqueous humor from the glaucomatous eye as a means of reducing IOP. The artificial drainage pathway created by these devices drives the fluid into a filtering bleb. The long-term success of filtration surgery is dictated by the proper functioning of the bleb and overlying Tenon's and conjunctival tissue. To better understand the influence of the health condition of these tissues on IOP, we have developed a mathematical model of fluid production in the eye, its removal from the anterior chamber by a particular glaucoma implant-the PRESERFLO® MicroShunt-, drainage into the bleb and absorption by the subconjunctival vasculature. The mathematical model was numerically solved by commercial FEM package COMSOL. Our numerical results of IOP for different postoperative conditions are consistent with the available evidence on IOP outcomes after the implantation of this device. To obtain insight into the adjustments in the implant's hydrodynamic resistance that are required for IOP control when hypotony or bleb scarring due to tissue fibrosis take place, we have simulated the flow through a microshunt with an adjustable lumen diameter. Our findings show that increasing the hydrodynamic resistance of the microshunt by reducing the lumen diameter, can effectively help to prevent hypotony. However, decreasing the hydrodynamic resistance of the implant will not sufficiently decrease the IOP to acceptable levels when the bleb is encapsulated due to tissue fibrosis. Therefore, to effectively reduce IOP, the adjustable glaucoma implant should be combined with a means of reducing fibrosis. The results reported herein may provide guidelines to support the design of future glaucoma implants with adjustable hydrodynamic resistances.

Wound Healing Response After Bleb-Forming Glaucoma Surgery With a SIBS Microshunt in Rabbits.

Purpose: The PreserFlo MicroShunt is an innovative implant for the surgical treatment of glaucoma. Although usually effective, surgeries can still fail due to fibrosis. This study was conducted to gain insight into the histological aspects of the fibrotic response and find potential targets to reduce postoperative fibrosis. Methods: Fifteen New Zealand White rabbits were implanted with a microshunt and followed up for 40 days. Animals were euthanized at postoperative days (PODs) 1, 5, and 40 to collect eyes for histological evaluation. Bleb formation and ocular health were assessed by slit-lamp (SL) biomicroscopy and optical coherence tomography (OCT). Intraocular pressure (IOP) was measured using rebound tonometry. Results: Blebs failed after approximately 2 weeks based on bleb survival and IOP measurements. No severe complications were observed with OCT and SL. Histology revealed a wide variety of cells, in the bleb and around the microshunt, including polymorphonuclear leucocytes (PMNs), myofibroblasts, and foreign body giant cells, at different PODs. Conclusions: Implantation of a poly(styrene-b-isobutylene-b-styrene) microshunt in rabbits resulted in the occurrence of a wide variety of cells during the wound-healing response. Future research should further elucidate the potential of these (earlier often overlooked) cells to target the fibrotic response in vivo-for example, by developing novel antifibrotic drugs, methods for sustained delivery of medications, or augmenting material properties. Translational Relevance: Current antifibrotic therapies aim to inhibit myofibroblasts; however, a wide variety of cells are involved in the fibrotic response. Future research focusing on these cells could offer novel methods for reducing the fibrotic response after glaucoma surgery.

Safety and Effectiveness of the PRESERFLO® MicroShunt in Primary Open-Angle Glaucoma: Results from a 2-Year Multicenter Study.

PURPOSE: To assess the safety and effectiveness of the PRESERFLO® MicroShunt (formerly InnFocus MicroShunt) in patients with primary open-angle glaucoma (POAG). DESIGN: The MicroShunt, a controlled ab externo glaucoma filtration surgery device, was investigated in a 2-year, multicenter, single-arm study. PARTICIPANTS: Eligible patients were aged 18-85 years with POAG inadequately controlled on maximal tolerated medical therapy with intraocular pressure (IOP) ≥18 and ≤35 mmHg or when glaucoma progression warranted surgery. METHODS: The MicroShunt was implanted as a stand-alone procedure with adjunctive use of topical mitomycin C (MMC; 0.2-0.4 mg/ml) for 2-3 minutes. MAIN OUTCOME MEASURES: The primary effectiveness outcome was IOP reduction and success (not requiring reoperation or pressure failures [IOP > 21 mmHg and < 20% reduction in IOP]) at year 1. Additional end points at year 2 included IOP reduction, success, glaucoma medications, adverse events (AEs), and reoperations. Results are reported in the overall population and subgroups of patients receiving 0.2 or 0.4 mg/ml MMC. RESULTS: In 81 patients, mean (± standard deviation [SD]) IOP decreased from 21.7 ± 3.4 mmHg at baseline to 14.5 ± 4.6 mmHg at year 1 and 14.1 ± 3.2 mmHg at year 2 (P < 0.0001). Overall success (with and without supplemental glaucoma medication use) at year 1 was 74.1%. Mean (± SD) number of medications decreased from 2.1 ± 1.3 at baseline to 0.5 ± 0.9 at year 2 (P < 0.0001), and 73.8% of patients were medication free. Most common nonserious AEs were increased IOP requiring medication or selective laser trabeculoplasty (25.9%) and mild-to-moderate keratitis (11.1%). There were 6 (7.4%) reoperations and 5 (6.2%) needlings by year 2. In an analysis (post hoc) according to MMC concentration, overall success was 78.1% (0.2 mg/ml) and 74.4% (0.4 mg/ml; P = 0.710). In the 0.2 and 0.4 mg/ml MMC groups, 51.9% and 90.3% of patients were medication free, respectively (P = 0.001). There was a trend toward lower IOP and higher medication reduction in the 0.4 mg/ml MMC subgroup. CONCLUSIONS: In this study, mean IOP and glaucoma medication reductions were significant and sustained over 2 years postsurgery. No long-term, sight-threatening AEs were reported. Further studies may confirm potential risk/benefits of higher MMC concentration.

The use of polyisobutylene-based polymers in ophthalmology.

A novel polyolefin called poly(styrene-block-isobutylene-block-styrene) ("SIBS") originated from Joseph P. Kennedy's laboratory at the University of Akron (Akron, Ohio, United States) and was developed as a biomaterial for long-term implant applications by the author. SIBS has no cleavable groups on its backbone or sidechains, is comprised predominantly of alternating secondary and quaternary carbons on its backbone, which prevents embrittlement and cracking under flexion, and undergoes multiple purification steps which renders it extremely biocompatible and well-suited for long-term applications in the eye. This article explores two ophthalmic devices; 1) the PRESERFLO® MicroShunt (Santen Pharmaceutical Co. Ltd., Osaka, Japan) made from SIBS that lowers intraocular pressure to thwart progression of vision loss from glaucoma, and 2) a novel intraocular lens (IOL) made from crosslinked polyisobutylene, which is under-development by Xi'an Eyedeal Medical Technology Co., Ltd. (Xi'an, China) that does not glisten nor cloud over time, as do most conventional IOLs.

History, presence, and future of mitomycin C in glaucoma filtration surgery.

PURPOSE OF REVIEW: Mitomycin C (MMC) is an alkylating agent with extraordinary ability to crosslink DNA, preventing DNA synthesis. By this virtue, MMC is an important antitumor drug. In addition, MMC has become the gold standard medication for glaucoma filtration surgery (GFS). This eye surgery creates a passage for drainage of aqueous humor (AqH) out of the eye into the sub-Tenon's space with the aim of lowering the intraocular pressure. A major cause of failure of this operation is fibrosis and scarring in the sub-Tenon's space, which will restrict AqH outflow. Intraoperative application of MMC during GFS has increased GFS success rate, presumably mainly by reducing fibrosis after GFS. However, still 10% of glaucoma surgeries fail within the first year. RECENT FINDINGS: In this review, we evaluate risks and benefits of MMC as an adjuvant for GFS. In addition, we discuss possible improvements of its use by adjusting dose and method of administration. SUMMARY: One way of improving GFS outcome is to prolong MMC delivery by using a drug delivery system.

Ab externo implantation of the MicroShunt, a poly (styrene-block-isobutylene-block-styrene) surgical device for the treatment of primary open-angle glaucoma: a review.

Trabeculectomy remains the 'gold standard' intraocular pressure (IOP)-lowering procedure for moderate-to-severe glaucoma; however, this approach is associated with the need for substantial post-operative management. Micro-invasive glaucoma surgery (MIGS) procedures aim to reduce the need for intra- and post-operative management and provide a less invasive means of lowering IOP. Generally, MIGS procedures are associated with only modest reductions in IOP and are targeted at patients with mild-to-moderate glaucoma, highlighting an unmet need for a less invasive treatment of advanced and refractory glaucoma. The PRESERFLO® MicroShunt (formerly known as InnFocus MicroShunt) is an 8.5 mm-long (outer diameter 350 µm; internal lumen diameter 70 µm) glaucoma drainage device made from a highly biocompatible, bioinert material called poly (styrene-block-isobutylene-block-styrene), or SIBS. The lumen size is sufficiently small that at normal aqueous flow hypotony is avoided, but large enough to avoid being blocked by sloughed cells or pigment. The MicroShunt achieves the desired pressure range in the eye by draining aqueous humor from the anterior chamber to a bleb formed under the conjunctiva and Tenon's capsule. The device is implanted ab externo with intraoperative Mitomycin C via a minimally invasive (relative to incisional surgery) surgical procedure, enabling precise control of placement without the need for gonioscopy, suture tension control, or suture lysis. The implantation procedure can be performed in combination with cataract surgery or as a standalone procedure. The MicroShunt received Conformité Européenne (CE) marking in 2012 and is intended for the reduction of IOP in eyes of patients with primary open-angle glaucoma in which IOP remains uncontrolled while on maximum tolerated medical therapy and/or in which glaucoma progression warrants surgery. Three clinical studies assessing the long-term safety and efficacy of the MicroShunt have been completed; a Phase 3 multicenter, randomized clinical study comparing the MicroShunt to primary trabeculectomy is underway. In preliminary studies, the MicroShunt effectively reduced IOP and use of glaucoma medications up to 3 years after implantation, with an acceptable safety profile. This article summarizes current literature on the unique properties of the MicroShunt, the preliminary efficacy and safety findings, and discusses its potential use as an alternative to trabeculectomy for glaucoma surgery.

The development of a micro-shunt made from poly(styrene-block-isobutylene-block-styrene) to treat glaucoma.

Glaucoma is the second leading cause of blindness with ∼70 million people worldwide who are blind from this disease. The currently practiced trabeculectomy surgery, the gold standard treatment used to stop the progression of vision loss, is rather draconian, traumatic to the patient and requires much surgical skill to perform. This article summarizes the more than 10-year development path of a novel device called the InnFocus MicroShunt®, which is a minimally invasive glaucoma drainage micro-tube used to shunt aqueous humor from the anterior chamber of the eye to a flap formed under the conjunctiva and Tenon's Capsule. The safety and clinical performance of this device approaches that of trabeculectomy. The impetus to develop this device stemmed from the invention of a new biomaterial called poly(styrene-block-isobutylene-block-styrene), or "SIBS." SIBS is ultra-stable with virtually no foreign body reaction in the body, which manifests in the eye as clinically insignificant inflammation and capsule formation. The quest for an easier, safer, and more effective method of treating glaucoma led to the marriage of SIBS with this glaucoma drainage micro-tube. This article summarizes the development of SIBS and the subsequent three iterations of design and four clinical trials that drove the one-year qualified success rate of the device from 43% to 100%. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 211-221, 2017.

The use of poly(styrene-block-isobutylene-block-styrene) as a microshunt to treat glaucoma.

The InnFocus MicroShunt® is a minimally invasive glaucoma drainage microtube used to shunt aqueous humor from the anterior chamber of the eye to a flap formed under the conjunctiva and Tenon's capsule. The safety and clinical performance of this device approaches that of trabeculectomy with mitomycin C, the current 'gold standard' treatment for advanced glaucoma. The invention of a new biomaterial called poly(styrene-block-isobutylene-block-styrene) or 'SIBS' is the enabling factor which led to the success of this product. SIBS is ultrastable with virtually no foreign body reaction in the body, which manifests as clinically insignificant inflammation and capsule formation in the eye. The lack of capsule formation enables unobstructed flow through the 70 µm lumen tube and the achievement of controlled low intraocular pressure, which is important for the management of glaucoma. This article summarizes the integration of SIBS into a glaucoma drainage device and confirms its functionality with clinical success over a 2-year period.

Three-Year Follow-up of a Novel Aqueous Humor MicroShunt.

AIMS: An observational study to determine the safety and efficacy of filtering surgery employing a microlumen aqueous drainage device (InnFocus MicroShunt), used intraoperatively with Mitomycin C, implanted alone or in combination with phacoemulsification. MATERIALS AND METHODS: Single-site, prospective, nonrandomized study of 23 eyes that had failed maximum tolerated glaucoma medication, followed for 3 years. A MicroShunt was implanted ab externo through a needle tract under the limbus, draining aqueous from the anterior chamber to the scleral surface. Prespecified outcome measures include: intraocular pressure (IOP) control, with and without supplemental medication, success rate, medication use, and adverse events. RESULTS: Fourteen patients received the MicroShunt alone and 9 with cataract surgery. At 1 (n=23), 2 (n=22), and 3 (n=22) years of follow-up; the qualified success rate (IOP ≤ 14 mm Hg and IOP reduction ≥ 20%) was 100%, 91%, and 95%; mean medicated IOP was reduced from 23.8 ± 5.3 to 10.7 ± 2.8, 11.9 ± 3.7, and 10.7 ± 3.5 mm Hg, and the mean number of glaucoma medications/patient was reduced from 2.4 ± 0.9 to 0.3 ± 0.8, 0.4 ± 1.0, and 0.7 ± 1.1, respectively. The most common complications were transient hypotony (13%, 3/23) and transient choroidal effusion (8.7%, 2/23), all resolved spontaneously. There were no leaks, infections, migrations, erosions, persistent corneal edema, or serious long-term adverse events. CONCLUSION: Surgery with the InnFocus MicroShunt transscleral aqueous drainage tube with Mitomycin C achieved IOP control in the low teens in most subjects up to 3 years of follow-up with only transient adverse events occurring within the first 3 months after surgery.

Physical Characterization and Platelet Interactions under Shear Flows of a Novel Thermoset Polyisobutylene-based Co-polymer.

Over the years, several polymers have been developed for use in prosthetic heart valves as alternatives to xenografts. However, most of these materials are beset with a variety of issues, including low material strength, biodegradation, high dynamic creep, calcification, and poor hemocompatibility. We studied the mechanical, surface, and flow-mediated thrombogenic response of poly(styrene-coblock-4-vinylbenzocyclobutene)-polyisobutylene-poly(styrene-coblock-4-vinylbenzocylcobutene) (xSIBS), a thermoset version of the thermoplastic elastomeric polyolefin poly(styrene-block-isobutylene-block-styrene) (SIBS), which has been shown to be resistant to in vivo hydrolysis, oxidation, and enzymolysis. Uniaxial tensile testing yielded an ultimate tensile strength of 35 MPa, 24.5 times greater than that of SIBS. Surface analysis yielded a mean contact angle of 82.05° and surface roughness of 144 nm, which was greater than for poly(ε-caprolactone) (PCL) and poly(methyl methacrylate) (PMMA). However, the change in platelet activation state, a predictor of thrombogenicity, was not significantly different from PCL and PMMA after fluid exposure to 1 dyn/cm(2) and 20 dyn/cm(2). In addition, the number of adherent platelets after 10 dyn/cm(2) flow exposure was on the same order of magnitude as PCL and PMMA. The mechanical strength and low thrombogenicity of xSIBS therefore suggest it as a viable polymeric substrate for fabrication of prosthetic heart valves and other cardiovascular devices.

Clinicopathologic correlations of poly-(styrene-b-isobutylene-b-styrene) glaucoma drainage devices of different internal diameters in rabbits.

BACKGROUND AND OBJECTIVE: To assess the biocompatibility and intraocular pressure (IOP) lowering effect of a novel glaucoma drainage implant in rabbits. MATERIALS AND METHODS: Sixteen New Zealand white rabbits received one of three glaucoma drainage implants fabricated from poly-(styrene-b-isobutylene-b-styrene [SIBS]) with an internal diameter of the lumen of either 70 (6 eyes), 100 (6 eyes), or 150 (4 eyes) µm. Clinical follow-up examinations were performed during 6 months and postmortem eyes were studied with light microscopy. RESULTS: Smaller internal diameter implants were associated with fewer complications. IOP levels were not statistically different among the groups. No eyes developed serious complications. Mild chronic inflammation was observed around the tube using light microscopy. CONCLUSION: SIBS glaucoma drainage implants did not produce clinically detectable intraocular inflammation in a rabbit model. The 70- and 100-µm SIBS drainage devices demonstrated fewer postoperative complications. IOP levels were not statistically different from control eyes in all groups.

Thrombogenic potential of Innovia polymer valves versus Carpentier-Edwards Perimount Magna aortic bioprosthetic valves.

Trileaflet polymeric prosthetic aortic valves (AVs) produce hemodynamic characteristics akin to the natural AV and may be most suitable for applications such as transcatheter implantation and mechanical circulatory support (MCS) devices. Their success has not yet been realized due to problems of calcification, durability, and thrombosis. We address the latter by comparing the platelet activation rates (PARs) of an improved polymer valve design (Innovia LLC) made from poly(styrene-block-isobutylene-block-styrene) (SIBS) with the commercially available Carpentier-Edwards Perimount Magna Aortic Bioprosthetic Valve. We used our modified prothrombinase platelet activity state (PAS) assay and flow cytometry methods to measure platelet activation of a pair of 19 mm valves mounted inside a pulsatile Berlin left ventricular assist device (LVAD). The PAR of the polymer valve measured with the PAS assay was fivefold lower than that of the tissue valve (p = 0.005) and fourfold lower with flow cytometry measurements (p = 0.007). In vitro hydrodynamic tests showed clinically similar performance of the Innovia and Magna valves. These results demonstrate a significant improvement in thrombogenic performance of the polymer valve compared with our previous study of the former valve design and encourage further development of SIBS for use in heart valve prostheses.

Evaluation of an integrated orbital tissue expander in congenital anophthalmos: report of preliminary clinical experience.

PURPOSE: To evaluate the effectiveness of an orbital tissue expander designed to stimulate orbital bone growth in an anophthalmic socket. DESIGN: Retrospective, noncomparative, interventional case series. SETTINGS: Institutional. STUDY POPULATION: Nine consecutive patients with unilateral congenital anophthalmos. INTERVENTION: The orbital tissue expander is made of an inflatable silicone globe sliding on a titanium T-plate secured to the lateral orbital rim with screws. The globe is inflated by a transconjunctival injection of normal saline through a 30-gauge needle to a final volume of approximately 5 cm(3). Computed tomography scans were used to determine the orbital volume. The data studied were: demographics, prior orbital expansion procedures, secondary interventions, orbital symmetry, and implant-related complications. MAIN OUTCOME MEASURES: The primary outcome measure was the orbital volume change, and the secondary outcome measures were changes in forehead, brow, and zygomatic eminence contour and adverse events. RESULTS: The average patient age at implantation was 41.89 ± 39.42 months (range, 9 to 108 months). The initial average volume of inflation was 3.00 ± 0.87 cm(3) (range, 2.0 to 4.0 cm(3)), and the average final volume of 4.33 ± 0.50 cm(3) (range, 4.0 to 5.0 cm(3)) was achieved. The duration of expansion was 18.89 ± 8.80 months (range, 4 to 26 months). All patients demonstrated an average increase in the orbital tissue expander implanted orbital volume of 5.112 ± 2.173 cm(3) (range, 2.81 to 10.38 cm(3)). The average difference between the volume of the implanted and the initial contralateral orbit was 5.68 ± 2.34 cm(3), which decreased to 2.53 ± 1.80 cm(3) at the final measurement (P < .001, paired t test). All implants remained inflated except for 2 iatrogenic punctures at the second inflation and 1 that was the result of implant failure. All were replaced. CONCLUSIONS: The integrated orbital tissue expander is safe and effective in stimulating anophthalmic socket bone growth.

In-vivo assessment of a novel polymer (SIBS) trileaflet heart valve.

BACKGROUND AND AIM OF THE STUDY: A novel trileaflet polymer valve, which is a composite design of a biostable and biocompatible polymer poly(styrene-block-isobutylene-block-styrene) (SIBS) with an embedded reinforcement polyethylene terephthalate (PET) fabric, is being developed with the intention of providing a valve that has low thrombogenicity, high durability and favorable hemodynamic performance. The study aim was to investigate the biocompatibility and performance of this SIBS valve prototype under physiological loading conditions similar to humans, using a large-animal model. METHODS: Four SIBS valves (two with surface modification using dimyristoyl phosphatidylcholine, DMPC), and two commercial Magna tissue valves, were implanted into sheep. Hemodynamic and blood chemistry measurements were performed periodically during the postoperative period. The explanted SIBS valves were extensively evaluated using macroscopic, histological, radiographical and scanning electron microscopy/energy-dispersive spectroscopy analysis. RESULTS: Three animals, one with the DMPC-coated SIBS valve, and two with the Magna valves, reached the end of the study in satisfactory clinical condition, and were euthanized after 20 weeks. The other three animals (two with SIBS valves, one with a DMPC-coated SIBS valve) died at 6, 6.5, and 10 weeks due either to material failure or myocardial infarction. The explanted valves exhibited stent deformation and cracks on the leaflets, which exposed the underlying PET fabric and resulted in severe blood and tissue reactions. Extrinsic calcification was identified on the leaflets, and was associated with the regions of surface cracks. CONCLUSION: The SIBS valve failed in animal testing because of material failure and calcification. The physical properties of SIBS must be improved in order to provide the structural integrity required for long-term in-vivo use in the form of a heart valve.