Evaluation of Sella Turcica Variations in Lateral Cephalometric Radiographs and its Association with Malocclusion.

Objectives: Understanding the shape and size of the sella turcica may help predict future orthodontic treatment needs related to skeletal malocclusion. This study aims to assess different morphological types of the sella turcica in lateral cephalometric radiographs and its correlation with malocclusion, as well as the relationship between gender and linear measurements of sella turcica. Materials and Methods: The lateral cephalometric radiographs of 410 volunteers (111 men and 299 women) aged 8 to 30 years were evaluated. The patients were divided into three groups based on their skeletal growth patterns (cl I, II, and III). Then the anatomical shape and linear dimensions of sella turcica were assessed. Measurements were made using Adobe Photoshop Version: 20.0.0 software, and data analysis was performed by IBM SPSS Statistics version 25. Results: The following morphologies were observed: normal (37.8%), oblique anterior wall (9.3%), double contour of the floor (21.5%), sella turcica bridge (8.8%), irregularity (notching) in the posterior part of sella turcica (16.6%), and pyramidal shape of the dorsum sellae (6.1%). No statistically significant relationship was found between sella turcica variations and skeletal malocclusion. The correlation between female sex with the diameter (p=0.027) and depth values (p=0.035) of sella turcica was statistically significant. There was no statistically significant difference (p>0.05) in length based on gender. Conclusion: The most morphological type reported was normal sella turcica (37.8%). Anatomical variations of sella turcica had no association with malocclusion. The most considerable depth and diameter of sella turcica were found in women.

Expression of IL-1ß, IL-6, TNF-α, and a-MMP-8 in sites with healthy conditions and with periodontal and peri-implant diseases: A case-control study.

Background: This study evaluated the gingival crevicular fluid (GCF) and Peri- implant crevicular fluid (PICF) concentrations of interleukin-1 beta (IL-1ß), interleukin-6 (IL-6), tumor necrosis factor-alpha (TNF-α) and active metalloproteinase-8 (a-MMP-8) in sites with healthy conditions vs. sites affected by periodontitis (PER) and peri-implantitis (PIM). Methods: Periodontally healthy (PH) sites with PER, sites with peri-implant health (PIH), and sites with PIM were investigated intra-individually, according to the inclusion criteria of each group. Probing pocket depth (PPD), plaque index, gingival index, and the presence or absence of bleeding on probing (BoP) were evaluated. In GCF and PICF samples, IL-1ß, IL-6, and TNF-α were quantified by ELISA Duoset® kit in combination with Ultramark® micro-ELISA digital reader; a-MMP8 concentration was analyzed by a chairside test (Perio/ImplantSafe®) in combination with a digital reader (ORALyzer®). Results: The concentrations of IL-6 and IL-1ß, TNF-α, and a-MMP-8 were significantly higher in the PIM and PER sites compared to healthy sites (P<0.05). Significantly higher concentrations of IL-1ß and a-MMP-8 were found in PIM vs. PER sites (P<0.05), while the concentrations of IL-6 and TNF-α did not differ between the PIM and PER groups (P>0.05). Conclusion: aMMP-8, IL-6, IL-1ß, and TNF-α presented higher GCF/PICF concentrations in diseased periodontal and peri-implant sites. However, only the concentrations of IL-1ß and a-MMP-8 were significantly higher in PIM than in PER sites.

Digital versus Manual Tracing in Cephalometric Analysis: A Systematic Review and Meta-Analysis.

Background: Over the years, various researchers have attempted to compare digital cephalometry with the conventional manual approach. There is a need to comprehensively analyze the findings from the earlier studies and determine the potential advantages and limitations of each method. The present systematic review aimed to compare the accuracy of digital and manual tracing in cephalometric analysis for the identification of skeletal and dental landmarks. Methods: A systematic search was performed using the keywords "Digital" AND "Manual" AND "Cephalometry" to identify relevant studies published in the English language in the past decade. The electronic data resources consulted for the elaborate search included the Cochrane Central Register of Controlled Trials (CENTRAL), MEDLINE, CINAHL, EMBASE, PsycINFO, Scopus, ERIC, and ScienceDirect with controlled vocabulary and free text terms. Results: A total of n = 20 studies were identified that fulfilled the inclusion and exclusion criteria within the timeframe of 2013 to 2023. The data extracted from the included articles and corresponding meta-analyses are presented in the text. Conclusions: The findings of the present systematic review and meta-analysis revealed trends suggesting that digital tracing may offer reliable measurements for specific cephalometric parameters efficiently and accurately. Orthodontists must consider the potential benefits of digital cephalometry, including time-saving and user-friendliness.

Prevalence of Peri-Implant Mucositis, Peri-Implantitis and Associated Risk Indicators of Implants with and without Laser-Microgrooved Collar Surface: A Long-Term (≥20 Years) Retrospective Study.

The aim of the current study was to retrospectively investigate the prevalence of peri-implant mucositis (PIM) and peri-implantitis (P) in a long-term follow-up (≥20 years) of implants with the same body design and body surface but different collar surfaces with laser-microtextured grooves (LMGSs) vs. no laser-microtextured grooves (no-LMGSs) in private practice patients. Furthermore, several patient-related, implant-related, site-, surgical-, and prosthesis-related potential disease risk factors were analyzed. A chart review of patients receiving at least one pair of implants (one with an LMGS and the other without LMGS) in the period 1993-2002 was used. Chi-square analysis was used to determine if a statistically significant difference between the investigated variables and PIM/P was present. Possible risk factors were statistically evaluated by a binary logistic regression analysis. A total of 362 patients with 901 implant-supported restorations (438 with LMGS and 463 no-LMGS) were included in the study. The cumulative survival rates of implants at 5, 10, 15, and 20 years were 98.1%, 97.4%, 95.4%, and 89.8%, respectively, for the LMGS group, and 93.2%, 91.6%, 89.5%, and 78.3% for the no-LMGS group. The difference was statistically significant at all timepoints (p < 0.05). In total, at the end of the follow-up period, 45.7% of patients and 39.8% of implants presented PIM, and 15.6% of patients and 14% of implants presented P. A total of 164 LMGS implants (37.4%) and 195 no-LMGS implants (42.1%) presented peri-implant mucositis, while 28 (6.3%) of LMGS implants and 98 (21.1%) no-LMGS implants demonstrated peri-implantitis. Differences between LMGS implants and no-LMGS implants were statistically significant (p < 0.05). The binary logistic regression identified collar surface, cigarette smoking, histories of treated periodontitis, and lack of peri-implant maintenance as risk factors for P. After at least 20 years of function in patients followed privately, LMGS implants compared to no-LMGS implants presented a statistically and significantly lower incidence of P. Implant collar surface, cigarette smoking, previously treated periodontitis, and lack of peri-implant maintenance are factors with significant association to P.

Mediterranean diet: a potential player in the link between oral microbiome and oral diseases.

Background: The oral microbiome is a complex and dynamic assemblage of microorganisms that colonize different sites of the oral cavity maintaining both oral and systemic health. Therefore, when its composition is altered, oral diseases occur. Among oral inflammatory pathologies, periodontal diseases affect the tissues surrounding the teeth, representing the main cause of tooth loss and one of the most important threats to the oral health. Lifestyle and eating habits influence the composition of the human oral microbiota and the development and progression of oral diseases. In this context, the Mediterranean Diet (MD) model, comprising both healthy dietary choices and lifestyle, is linked to the prevention of several metabolic and chronic-degenerative pathological processes, including oral diseases. Indeed, the MD is a plant-based diet, enriched of anti-inflammatory and antioxidant nutrients, which may induce beneficial effects against dental caries and periodontal diseases. Aim: This review summarizes the role of the oral microbiome in the development of the oral diseases and the potential of MD in modulating the oral microbiome leading to implications for oral health. Conclusions: The data collected highlight the need to promote the MD pattern along with the correct hygiene habits to prevent the development of oral diseases.

The oral microbiome is a complex and dynamic assemblage of microorganisms that colonize different sites of the oral cavity maintaining both oral and systemic health.The Mediterranean Diet (MD) model, comprising both healthy dietary choices and lifestyle, is linked to the prevention of several metabolic and chronic degenerative pathological processes, including oral diseases.The MD may represent a potential player in the link between oral microbiome and oral diseases.

Diagnostic accuracy of conventional orthodontic radiographic modalities and cone-beam computed tomography for localization of impacted maxillary canine teeth.

BACKGROUND: Orthodontic treatment planning for an impacted canine tooth requires accurate information about its position. The aim of this study was to compare the diagnostic accuracy of two conventional orthodontic radiographic modalities with cone-beam computed tomography (CBCT) for localization of impacted maxillary canine teeth. MATERIALS AND METHODS: Panoramic radiographs, lateral cephalograms, and CBCT scans of 30 patients with unilaterally impacted maxillary canine teeth were retrieved from the archives. Eight expert orthodontists evaluated the parameters related to the location of impacted canine teeth by using panoramic radiographs and lateral cephalograms of patients. After 4 weeks, the same parameters were evaluated on CBCT scans of patients. The diagnostic accuracy of conventional modalities and CBCT was compared with each other and also with the gold standard. RESULTS: The conventional radiographic modalities and CBCT had similar accuracy for assessment of the overall inclination (p = 0.11), apex morphology (p = 0.18), and mesiodistal position of the apex (p = 0.12). CBCT had significantly higher accuracy for determination of incisal tip location (p = 0.001), labiopalatal (p = 0.001) and vertical (p = 0.01) position of the crown tip, minimum bone thickness covering the crown (p = 0.001), and root resorption of the adjacent tooth (p = 0.001). CONCLUSION: The combination of panoramic radiographs and lateral cephalograms was sufficiently accurate to assess some diagnostic parameters such as overall inclination, apex morphology, and mesiodistal apex location of impacted canine teeth.

A radiation free alternative to CBCT volumetric rendering for soft tissue evaluation / Um método alternativo à TCFC sem radiação ionizante para a avaliação de tecidos moles da face

Objective: The aim of the present study is to evaluate whether a "radiation free" method using 3D facial scan can replace Cone Beam Computed Tomography (CBCT) volumetric rendering of soft tissue of the patient to assess maxillofacial surgery outcomes and compare the reference points and angular measurements of patient facial soft tissue. Material and Methods: Facial soft tissue scan of the patient's face, before and after orthognathic surgery and a CBCT of the skull for volumetric rendering of soft tissues were carried out. The 3D acquisitions were processed using Planmeca ProMax 3D ProFace® software (Planmeca USA, Inc.; Roselle, Illinois, USA). The participant were positioned in a natural position during the skull scannering. Three sagittal angular measurements were performed (Tr-NA, Tr-N-Pg, Ss-N-Pg) and two verticals (Go-N-Me, Tr-Or-Pg) on facial soft tissue scan and on the patient's 3D soft tissue CBCT volumetric rendering. Results: A certain correspondence has been demonstrated between the measurements obtained on the Proface and those on the CBCT. Conclusion: A radiation free method was to be considered an important diagnostic tool that works in conditions of not subjecting the patient to harmful ionizing radiation and it was therefore particularly suitable for growing subjects. The soft tissue analysis based on the realistic facial scan has shown sufficient reliability and reproducibility even if further studies are needed to confirm the research result.(AU)

Objetivo:Avaliar se um método "livre de radiação" usando escaneamento facial 3D pode substituir a renderização volumétrica da tomografia computadorizada de feixe cônico (TCFC) dos tecidos moles do paciente para analisar os resultados da cirurgia maxilofacial e comparar os pontos de referência e medições angulares afim de avaliar a correspondência entre as duas metodologias. Material e Métodos: Foi realizado o escaneamento dos tecidos moles faciais do paciente, antes e depois da cirurgia ortognática e uma tomografia computadorizada de feixe cônico do crânio para renderização volumétrica dos tecidos moles. As aquisições 3D foram processadas usando o software Planmeca ProMax 3D ProFace® (Planmeca USA, Inc.; Roselle, Illinois, USA). O participante foi posicionado em posição natural durante o escaneamento do crânio. Três medições angulares sagitais foram realizadas (Tr-NA, Tr-N-Pg, Ss-N-Pg) e duas verticais (Go-N-Me, Tr-Or-Pg) nas imagens de scaneamento e nas imagens do tecido mole facial da reconstrução tridimensional da TCFC. Resultados: Uma certa correspondência foi demonstrada entre as medidas obtidas no Proface® e aquelas na TCFC. Conclusão: Um método livre de radiação deve ser considerado uma importante ferramenta de diagnóstico que funciona em condições de não submeter o paciente a radiação ionizante nociva e, portanto, é particularmente adequado para indivíduos em crescimento. A análise de tecidos moles com base na varredura facial realista mostrou confiabilidade e reprodutibilidade, porém mais estudos são necessários para confirmar o resultado da pesquisa. (AU)

Upper First and Second Molar Pulp Chamber Endodontic Anatomy Evaluation According to a Recent Classification: A Cone Beam Computed Tomography Study.

(1) The possibility of knowing information about the anatomy in advance, in particular the arrangement of the endodontic system, is crucial for successful treatment and for avoiding complications during endodontic therapy; the aim was to find a correlation between a minimally invasive and less stressful endodontic access on Ni-Ti rotary instruments, but which allows correct vision and identification of anatomical reference points, simplifying the typologies based on the shape of the pulp chamber in coronal three-dimensional exam views. (2) Based on the inclusion criteria, 104 maxillary molars (52 maxillary first molars and 52 maxillary second molars) were included in the study after 26 Cone Beam Computed Tomography (CBCT) acquisitions (from 15 males and 11 females). And linear measurements were taken with the CBCT-dedicated software for subsequent analysis. (3) The results of the present study show data similar to those already published about this topic. Pawar and Singh's simplified classification actually seems to offer a schematic way of classification that includes almost all of the cases that have been analyzed. (4) The use of a diagnostic examination with a wide Field of View (FOV) and low radiation dose represents an exam capable of obtaining a lot of clinical information for endodontic treatment. Nevertheless, the endodontic anatomy of the upper second molar represents a major challenge for the clinician due to its complexity both in canal shape and in ramification.

In Vitro Evaluation of a Recently Developed Rotary File: AF Rotary / Avaliação in vitro de um arquivo rotativo desenvolvido recentemente: AF Rotary

Objective: Aim of the present study is to evaluate mechanical properties of a newly developed rotary file, AF Rotary (Fanta Dental, Shanghai, China), and to compare these features with a worldwide spread rotary file, Protaper Gold F2 (PTG F2; Dentsply Maillefer, Ballaigues, Switzerland). Material and Methods: 60 AF Rotary 25.06 and 60 PTG F2 were divided in three groups of 20 files each. A group underwent to cyclic fatigue resistance tests, second group underwent to torsional resistance tests, third group underwent to bending tests. The statistical analysis was performed using t student test with significance level set at 95% (p < 0.05). Results: AF Rotary showed significantly higher torsional resistance and cyclic fatigue resistance (p < 0.05) when compared to the PTG F2. AF Rotary also showed significantly lower bending resistance (p < 0.05) when compared to the PTG F2. Conclusion: Therefore, within the limitations of this study, the results show better performances for AF Rotary compared to PTG F2 regarding the cyclic fatigue test, the torsional test and the bending test. Since the PTG F2 is a commonly used and widely investigated instrument it could be possible to state that the AF Rotary exhibits remarkable in vitro performances. (AU)

Objetivo: O objetivo do presente estudo é avaliar as propriedades mecânicas de uma lima rotativa recém-desenvolvida, AF Rotary (Fanta Dental, Shanghai, China), e comparar essas características com uma lima rotativa mundialmente difundida, Protaper Gold F2 (PTG F2; Dentsply Maillefer, Ballaigues, Suíça). Material e Métodos: 60 AF Rotary 25.06 e 60 PTG F2 foram divididos em três grupos de 20 arquivos cada. Um grupo foi submetido a testes de resistência à fadiga cíclica, o segundo grupo foi submetido a testes de resistência à torção, o terceiro grupo foi submetido a testes de flexão. A análise estatística foi realizada por meio do teste t student com nível de significância de 95% (p <0,05). Resultados: AF Rotary apresentou resistência torcional e resistência à fadiga cíclica significativamente maiores (p <0,05) quando comparado ao PTG F2. AF Rotary também apresentou resistência à flexão significativamente menor (p <0,05) quando comparado ao PTG F2. Conclusão: Portanto, dentro das limitações deste estudo, os resultados mostram melhores desempenhos do AF Rotary em relação ao PTG F2 no que diz respeito ao teste de fadiga cíclica, ao teste de torção e ao teste de flexão. Uma vez que o PTG F2 é um instrumento comumente usado e amplamente investigado, pode-se afirmar que o AF Rotary exibe desempenhos in vitro notáveis. (AU)