The effect of a split-dose intravenous dexamethasone and a single high-dose on postoperative blood glucose after total joint arthroplasty: a randomized double-blind placebo-controlled trial.

BACKGROUND: In patients undergoing total joint arthroplasty (TJA), the administration of dexamethasone may contribute to perioperative blood glucose (BG) disturbances, potentially resulting in complications, even in patients without diabetes. This study aimed to demonstrate the impact of different administration regimens of dexamethasone in postoperative BG levels. METHODS: In this randomized, controlled, double-blind trial, 136 patients without diabetes scheduled for TJA were randomly assigned to three groups: two perioperative saline injections (Group A, placebo); a single preoperative injection of 20 mg dexamethasone and a postoperative saline injection (Group B), and two perioperative injections of 10 mg dexamethasone (Group C). Primary outcomes were the postoperative fasting blood glucose (FBG) levels. Secondary outcome parameters were the postoperative postprandial blood glucose (PBG) levels. Postoperative complications within 90 days were also recorded. Risk factors for FBG ≥ 140 mg/dl and PBG ≥ 180 mg/dl were investigated. RESULTS: Compared to Group A, there were transient increases in FBG and PBG on postoperative days (PODs) 0 and 1 in Groups B and C. Statistical differences in FBG and PBG among the three groups were nearly absent from POD 1 onward. Both dexamethasone regimens did not increase the risk for postoperative FBG ≥ 140 mg/dl or PBG ≥ 180 mg/dl. Elevated preoperative HbA1c levels may increase the risk of postoperative FBG ≥ 140 mg/dl or PBG ≥ 180 mg/dl, respectively. CONCLUSION: Perioperative intravenous high-dose dexamethasone to patients without diabetes has transient effects on increasing BG levels after TJA. However, no differences were found between the split-dose and single high-dose regimens. The elevated preoperative HbA1c, but not the dexamethasone regimens were the risk factor for FBG ≥ 140 mg/dl and PBG ≥ 180 mg/dl. TRIAL REGISTRATION: Chinese Clinical Trail Registry, ChiCTR2300069473. Registered 17 March 2023, https://www.chictr.org.cn/showproj.html?proj=186760 .

An intranasal attenuated Coxsackievirus B3 vaccine induces strong systemic and mucosal immunity against CVB3 lethal challenge.

Coxsackievirus B3 (CVB3) triggers viral myocarditis, with no effective vaccine yet. This fecal-oral transmitted pathogen has prompted interest in mucosal immunization strategies to impede CVB3 spread. We developed a new attenuated vaccine strain, named CVB3(mu). The potential of CVB3(mu) to stimulate mucosal immune protection remains to be elucidated. This study evaluates the attenuation characteristics of CVB3(mu) via a rapid evolution cellular model and RNA sequencing. Its temperature sensitivity and safety were evaluated through in vitro and in vivo experiments. The mucosal immunity protection of CVB3(mu) was assessed via intranasal immunization in Balb/c mice. The results indicate that CVB3(mu) exhibits temperature sensitivity and forms smaller plaques. It sustains fewer genetic mutations and still possesses certain attenuated traits up to the 25th passage, in comparison to CVB3(WT). Intranasal immunization elicited a significant serum neutralizing antibodies, and a substantial sIgA response in nasal washes. In vivo trials revealed CVB3(mu) protection in adult mice and passive protection in suckling mice against lethal CVB3(WT) challenges. In conclusion, CVB3(mu), a live attenuated intranasal vaccine, provides protection involving humoral and mucosal immunity, making it a promising candidate to control CVB3 spread and infection.

Atmospheric brown carbon in China haze is dominated by secondary formation.

Brown carbon (BrC) is a class of light-absorbing organic aerosols (OA) and has significant influence on atmospheric radiative forcing. However, the current limited understanding of the physicochemical properties of BrC restricts the accurate evaluation of its environmental effects. Here the optical characteristics and chemical composition of BrC during wintertime in the Yangtze River Delta (YRD) region, China were measured by using high-resolution aerosol mass spectrometry (HR-AMS) and UV-vis spectrometry. Our results showed that BrC in PM2.5 during the campaign was dominated by water-soluble organics, which consist of less oxidized oxygenated OA (LO-OOA), more oxidized oxygenated OA (MO-OOA), fossil fuel OA (FFOA) and biomass burning OA (BBOA). MO-OOA and BBOA were the strongest light absorbing BrC at 365 nm (Abs365), followed by LO-OOA and FFOA with a mass absorption coefficient (MAC) being 0.74 ± 0.04, 0.73 ± 0.03, 0.48 ± 0.04 and 0.39 ± 0.06 m2 g-1 during the campaign, respectively. In the low relative humidity (RH < 80 %) haze periods Abs365 of LO-OOA contributed to 44 % of the total light absorption at 365 nm, followed by MO-OOA (31 %), FFOA (21 %) and BBOA (4 %). In contrast, in the high-RH (RH > 80 %) haze periods Abs365 was dominated by MO-OOA, which accounted for 62 % of the total Abs365, followed by LO-OOA (17 %), BBOA (13 %) and FFOA (8 %). Chemical composition analysis further showed that LO-OOA and MO-OOA are produced from gas-phase photooxidation of VOCs and aerosol aqueous reactions, respectively, in which ammonia significantly enhanced the formation and light absorption of BrC in the high RH haze period. On average, >75 % of the total Abs365nm in the YRD region during the haze events was contributed by LO-OOA and MO-OOA, suggesting that atmospheric BrC in China haze periods is predominantly formed by secondary reactions.

Transforming growth factor-ß1 protects mechanically injured cortical murine neurons by reducing trauma-induced autophagy and apoptosis.

Transforming growth factor ß1 (TGF-ß1) has a neuroprotective function in traumatic brain injury (TBI) through its anti-inflammatory and immunomodulatory properties. However, the precise mechanisms underlying the neuroprotective actions of TGF-ß1 on the cortex require further investigation. In this study, we were aimed to investigate the regulatory function of TGF-ß1 on neuronal autophagy and apoptosis using an in vitro primary cortical neuron trauma-injury model. LDH activity was assayed to measure cell viability, and intracellular [Ca2+] was measured using Fluo-4-AM in an in vitro primary cortical neuron trauma-injury model. RNA-sequencing (RNAseq), immunofluorescent staining, transmission electron microscopy (TEM), western blot and CTSD activity detection were employed. We observed significant enrichment of DEGs related to autophagy, apoptosis, and the lysosome pathway in trauma-injured cortical neurons. TEM confirmed the presence of autophagosomes as well as autophagolysosomes. Western blot revealed upregulation of autophagy-related protein light chain 3 (LC3-II/LC3-I), sequestosome 1 (SQSTM1/p62), along with apoptosis-related protein cleaved-caspase 3 in trauma-injured primary cortical neurons. Furthermore, trauma-injured cortical neurons showed an upregulation of lysosomal marker protein (LAMP1) and lysosomal enzyme mature cathepsin D (mCTSD), but a decrease in the activity of CTSD enzyme. These results indicated that apoptosis was up-regulated in trauma- injured cortical neurons at 24 h, accompanied by lysosomal dysfunction and impaired autophagic flux. Notably, TGF-ß1 significantly reversed these changes. Our results suggested that TGF-ß1 exerted neuroprotective effects on trauma- injured cortical neurons by reducing lysosomal dysfunction, decreasing the accumulation of autophagosomes and autophagolysosomes, and enhancing autophagic flux.

Molecular spectra and docking simulations investigated the binding mechanisms of tetracycline onto E. coli extracellular polymeric substances.

Extracellular polymeric substances (EPS), which were an important fraction of natural organic matter (NOM), played an important role in various environmental processes. However, the heterogeneity, complexity, and dynamics of EPS make their interactions with antibiotics elusive. Using advanced multispectral technology, this study examined how EPS interacts with different concentrations of tetracycline (TC) in the soil system. Our results demonstrated that protein-like (C1), fulvic-like (C2), and humic-like (C3) fractions were identified from EPS. Two-dimensional synchronous correlation spectroscopy (2D-SF-COS) indicated that the protein-like fraction gave faster responses than the fulvic-like fraction during the TC binding process. The sequence of structural changes in EPS due to TC binding was revealed by two-dimensional Fourier Transformation Infrared correlation spectroscopy (2D-FTIR-COS) as follows: 1550 > 1660 > 1395 > 1240 > 1087 cm-1. It is noteworthy that the sensitivity of the amide group to TC has been preserved, with its intensity gradually increasing to become the primary binding site for TC. The integration of hetero-2DCOS maps with moving window 2D correlation spectroscopy (MW2DCOS) provided a unique insight into understanding the correlation between EPS fractions and functional groups during the TC binding process. Moreover, molecular docking (MD) discovered that the extracellular proteins would provide plenty of binding sites with TC through salt bridges, hydrogen bonds, and π-π base-stacking forces. With these results, systematic investigations of the dynamic changes in EPS components under different concentrations of antibiotic exposure demonstrated the advanced capabilities of multispectral technology in examining intricate interactions with EPS in the soil environment.

Impacts of climate and land use change on terrestrial carbon storage: A multi-scenario case study in the Yellow River Basin (1992-2050).

Currently, socioeconomic development and climate change pose new challenges to the assessment and management of terrestrial carbon storage (CS). Accurate prediction of future changes in land use and CS under different climate scenarios is of great significance for regional land use decision-making and carbon management. Taking the Yellow River Basin (YRB) in China as the study area, this study proposed a framework integrating the land use harmonization2 (LUH2) dataset, the patch-generating land use simulation (PLUS) model, and the integrated valuation of ecosystem services and trade-offs (InVEST) model. Under this framework, we systematically analyzed the spatiotemporal evolution characteristics of land use and their impact on CS in the YRB from 1992 to 2050. The results showed that (1) CS was highest in forestland and lowest in construction land, with a spatial distribution of high in the south and low in the north. From 1992 to 2020, construction land, forestland, and grassland increased while cropland decreased, reducing the total CS by 74.04 Tg. (2) From 2020 to 2050, under SSP1-2.6 scenario, forestland increased by 158.87 %; under SSP2-4.5 scenario, unused land decreased by 65.55 %; and under SSP5-8.5 scenario, construction land increased by 13.88 %. By 2050, SSP1-2.6 scenario exhibited the highest CS (8105.25 Tg), followed by SSP2-4.5 scenario (7363.61 Tg), and SSP5-8.5 scenario was the lowest (7315.86 Tg). (3) Forestland and construction land were the most critical factors affecting the CS. Shaanxi and Shanxi had the largest CS in all scenarios, and Qinghai had a huge carbon sink potential under SSP1-2.6 scenario. Scenario modeling demonstrated that future climate and land-use changes would have significant impacts on terrestrial CS in the YRB, and green development pathways could strongly contribute to meeting the dual­carbon target. Overall, this study provides a scientific basis for promoting low-carbon development, land-use optimization, and ecological civilization construction in YRB, China.

Effects of Dexamethasone on Postoperative Glycemic Control in Patients After Primary Total Joint Arthroplasty: A Randomized Double-Blind Controlled Trial.

BACKGROUND: In patients undergoing total joint arthroplasty, the use of dexamethasone (DEX) may cause perioperative blood glucose (BG) disorders, leading to complications even in patients who do not have diabetes. We aimed to evaluate the effects of different DEX doses on perioperative BG levels. METHODS: A total of 135 patients who do not have diabetes were randomized into three groups: preoperative intravenous (IV) injection of normal saline (Group A, the placebo group), preoperative IV injection of 10 mg DEX (Group B), and preoperative IV injection of 20 mg DEX (Group C). Postoperative fasting BG (FBG) levels were designated as the primary outcome, while postoperative postprandial BG (PBG) levels were assigned as the secondary outcome. The incidence of complications was recorded. We also investigated the risk factors for FBG ≥ 140 mg/dL and PBG ≥ 180 mg/dL. RESULTS: The FBG levels were higher in Groups B and C than in Group A on postoperative days (PODs) 0 and 1. The PBG levels were lower for Groups A and B compared to Group C on POD 1. No differences in FBG or PBG were detected beyond POD 1. Elevated preoperative glycosylated hemoglobin A1c levels increased the risk of FBG ≥ 140 mg/dL and PBG ≥ 180 mg/dL, respectively. However, preoperative IV injection of DEX was not associated with FBG ≥ 140 mg/dL or PBG ≥ 180 mg/dL. No differences were found in postoperative complications among the three groups. CONCLUSIONS: The preoperative IV administration of 10 or 20 mg DEX in patients who do not have diabetes showed transient effects on postoperative BG after total joint arthroplasty. The preoperative glycosylated hemoglobin A1c level threshold (regardless of the administration or dosage of DEX) that increased the risk for the occurrence of FBG ≥ 140 mg/dL and PBG ≥ 180 mg/dL was 5.75 and 5.85%, respectively.

Achromobacter seleniivolatilans sp. nov. and Buttiauxella selenatireducens sp. nov., isolated from the rhizosphere of selenium hyperaccumulator Cardamine hupingshanesis.

Two Gram-stain-negative bacterial strains, R39T and R73T, were isolated from the rhizosphere soil of the selenium hyperaccumulator Cardamine hupingshanesis in China. Strain R39T transformed selenite into elemental and volatile selenium, whereas strain R73T transformed both selenate and selenite into elemental selenium. Phylogenetic and phylogenomic analyses indicated that strain R39T belonged to the genus Achromobacter, while strain R73T belonged to the genus Buttiauxella. Strain R39T (genome size, 6.68 Mb; G+C content, 61.6 mol%) showed the closest relationship to Achromobacter marplatensis LMG 26219T and Achromobacter kerstersii LMG 3441T, with average nucleotide identity (ANI) values of 83.6 and 83.4 %, respectively. Strain R73T (genome size, 5.22 Mb; G+C content, 50.3 mol%) was most closely related to Buttiauxella ferragutiae ATCC 51602T with an ANI value of 86.4 %. Furthermore, strain A111 from the GenBank database was found to cluster with strain R73T within the genus Buttiauxella through phylogenomic analyses. The ANI and digital DNA-DNA hybridization values between strains R73T and A111 were 97.5 and 80.0% respectively, indicating that they belong to the same species. Phenotypic characteristics also differentiated strain R39T and strain R73T from their closely related species. Based on the polyphasic analyses, strain R39T and strain R73T represent novel species of the genera Achromobacter and Buttiauxella, respectively, for which the names Achromobacter seleniivolatilans sp. nov. (type strain R39T=GDMCC 1.3843T=JCM 36009T) and Buttiauxella selenatireducens sp. nov. (type strain R73T=GDMCC 1.3636T=JCM 35850T) are proposed.

Ortho-ester-substituted diaryliodonium salts enabled regioselective arylocyclization of naphthols toward 3,4-benzocoumarins.

Cyclic annulation involving diaryliodonium salts is an efficient tool for the construction of two or more chemical bonds in a one-pot process. Ortho-functionalized diaryliodonium salts have showcased distinct reactivity in the exploration of benzocyclization or arylocyclization. With this strategy of ortho-ester-substituted diaryliodonium salts, herein, we utilized a copper catalyst to activate the C-I bond of diaryliodonium salts in the generation of aryl radicals, thus resulting in an annulation reaction with naphthols and substituted phenols. This approach yielded a diverse array of 3,4-benzocoumarin derivatives bearing various substituents.

Label-Free Multiplex Profiling of Exosomal Proteins with a Deep Learning-Driven 3D Surround-Enhancing SERS Platform for Early Cancer Diagnosis.

Identification of protein profiling on plasma exosomes by SERS can be a promising strategy for early cancer diagnosis. However, it is still challenging to detect multiple exosomal proteins simultaneously by SERS since the Raman signals of exosomes detected by conventional colloidal nanocrystals or two-dimensional SERS substrates are incomplete and complex. Herein, we develop a novel three-dimensional (3D) surround-enhancing SERS platform, named 3D se-SERS, for the multiplex detection of exosomal proteins. In this 3D se-SERS, proteins and exosomes are covered with "hotspots" generated by the gold nanoparticles, which surround the analytes densely and three-dimensionally, providing sensitive and comprehensive SERS signals. Combining this 3D se-SERS with a deep learning model, we successfully quantitatively profiled seven proteins including CD63, CD81, CD9, CD151, CD171, TSPAN8, and PD-L1 on the surface of plasma exosomes from patients, which can predict the occurrence and advancement of lung cancer. This 3D se-SERS integrating deep learning technique benefits from high sensitivity and significant multiplexing ability for comprehensive analysis of proteins and exosomes, demonstrating the potential of deep learning-driven 3D se-SERS technology for plasma exosome-based early cancer diagnosis.

Solution Blow Spinning of the Benzimidazole-Containing Aramid Nanofibers for Separators of Lithium-Ion Batteries.

Nanofibers based on high-performance polymers are much highlighted in recent studies toward advanced lithium-ion batteries. Herein, we demonstrate one scalable poly(ethylene oxide) (PEO)-assisted solution blow spinning strategy for the preparation of heterocyclic aramid (HA) nanofibers of poly(p-phenylene-benzimidazole-terephthalamide). The incorporation of PEO is essential to improve the spinnability of the HA solution achieved directly through the low-temperature-solution copolymerization process. Additionally, the flexible PEO with a strong H-bonding affinity is also utilized as the molecular zipper to adjust the pore size of the nanofiber membrane during the post-treatment process. The obtained membrane combines the good wettability of PEO to the liquid electrolytes, with outstanding mechanical strength, modulus, toughness, and environmental resistance of HA. The nonwoven separator membranes with a porosity of 83.6% exhibited excellent comprehensive performance, which could be seen not only on the high tensile strength (68.2 MPa), modulus (3.0 GPa), and toughness but also on the high thermal stability (Td > 405 °C) and flame retardancy, as well as the high electrolyte uptake (302.4%). The ion conductivity of the porous separators reached 0.83 mS/cm, with the bulk resistance dropping to 1/4 of the reference polypropylene separator. In the assembly of the Li/LiFePO4 half battery, the HA separators displayed improved discharge specific capacity and high retention in both rate capability and cycling tests, providing the potential industrial preparation for advanced lithium-ion batteries.

Ultrafast universal fabrication of configurable porous silicone-based elastomers by Joule heating chemistry.

Silicone-based elastomers (SEs) have been extensively applied in numerous cutting-edge areas, including flexible electronics, biomedicine, 5G smart devices, mechanics, optics, soft robotics, etc. However, traditional strategies for the synthesis of polymer elastomers, such as bulk polymerization, suspension polymerization, solution polymerization, and emulsion polymerization, are inevitably restricted by long-time usage, organic solvent additives, high energy consumption, and environmental pollution. Here, we propose a Joule heating chemistry method for ultrafast universal fabrication of SEs with configurable porous structures and tunable components (e.g., graphene, Ag, graphene oxide, TiO2, ZnO, Fe3O4, V2O5, MoS2, BN, g-C3N4, BaCO3, CuI, BaTiO3, polyvinylidene fluoride, cellulose, styrene-butadiene rubber, montmorillonite, and EuDySrAlSiOx) within seconds by only employing H2O as the solvent. The intrinsic dynamics of the in situ polymerization and porosity creation of these SEs have been widely investigated. Notably, a flexible capacitive sensor made from as-fabricated silicone-based elastomers exhibits a wide pressure range, fast responses, long-term durability, extreme operating temperatures, and outstanding applicability in various media, and a wireless human-machine interaction system used for rescue activities in extreme conditions is established, which paves the way for more polymer-based material synthesis and wider applications.

Cocktail of Ropivacaine, Morphine, and Diprospan Reduces Pain and Prolongs Analgesic Effects after Total Knee Arthroplasty: A Prospective Randomized Controlled Trial.

Background: Local infiltration analgesia (LIA) provides postoperative analgesia for total knee arthroplasty (TKA). The purpose of this study was to evaluate the analgesic effect of a cocktail of ropivacaine, morphine, and Diprospan for TKA. Methods: A total of 100 patients from September 2018 to February 2019 were randomized into 2 groups. Group A (control group, 50 patients) received LIA of ropivacaine alone (80 ml, 0.25% ropivacaine). Group B (LIA group, 50 patients) received an LIA cocktail of ropivacaine, morphine, and Diprospan (80 ml, 0.25% ropivacaine, 0.125 mg/ml morphine, and 62.5 µg/ml compound betamethasone). The primary outcomes were the levels of inflammatory markers C-reactive protein (CRP) and interleukin-6 (IL-6), pain visual analog scale (VAS) scores, opioid consumption, range of motion (ROM), functional tests, and sleeping quality. The secondary outcomes were adverse events, satisfaction rates, HSS scores, and SF-12 scores. The longest follow-up was 2 years. Results: The two groups showed no differences in terms of characteristics (P > 0.05). Group B had lower resting VAS pain scores (1.54 ± 0.60, 95% CI = 1.37 to 1.70 vs. 2.00 ± 0.63, 95% CI = 2.05 to 2.34) and active VAS pain scores (2.64 ± 0.62, 95% CI = 2.46 to 2.81 vs. 3.16 ± 0.75, 95% CI = 2.95 to 3.36) within 48 h postoperatively than Group A (P < 0.001), while none of the pain differences exceeded the minimal clinically important difference (MCID). Group B had significantly lower CRP levels (59.49 ± 13.01, 95% CI = 55.88 to 63.09 vs. 65.95 ± 14.41, 95% CI = 61.95 to 69.94) and IL-6 levels (44.11 ± 13.67, 95% CI = 40.32 to 47.89 vs. 60.72 ± 15.49, 95% CI = 56.42 to 65.01), lower opioid consumption (7.60 ± 11.10, 95% CI = 4.52 to 10.67 vs. 13.80 ± 14.68, 95% CI = 9.73 to 17.86), better ROM (110.20 ± 10.46, 95% CI = 107.30 to 113.09 vs. 105.30 ± 10.02, 95% CI = 102.52 to 108.07), better sleep quality (3.40 ± 1.03, 95% CI = 3.11 to 3.68 vs. 4.20 ± 1.06, 95% CI = 3.90 to 4.49), and higher satisfaction rates than Group A within 48 h postoperatively (P < 0.05). Adverse events, HSS scores, and SF-12 scores were not significantly different within 2 years postoperatively. Conclusions: A cocktail of ropivacaine, morphine, and Diprospan prolongs the analgesic effect up to 48 h postoperatively. Although the small statistical benefit may not result in MCID, the LIA cocktail still reduces opioid consumption, results in better sleeping quality and faster rehabilitation, and does not increase adverse events. Therefore, cocktails of ropivacaine, morphine, and Diprospan have good application value for pain control in TKA. This trial is registered with ChiCTR1800018372.

Predicting the Probability of Tumor-Specific Survival in Patients Diagnosed With Primary Tumors in the Spinal Cord Using Nomogram Models.

STUDY DESIGN: A retrospective cohort study. OBJECTIVE: The goal of this study was to develop a useful clinical prediction nomogram to accurately predict the cancer-specific survival (CSS) of patients with primary spinal cord tumor (SCT), thereby formulating scientific prevention and aiding clinical decision-making. METHODS: In this study, patients with SCT diagnoses from the surveillance, epidemiology, and end results (SEER) database (2000-2018) were taken into account. Initially, a nomogram was created using the CSS-associated independent factors that were determined from both univariate and multivariable Cox regression analyses. Furthermore, the nomogram's capacity for calibration, ability to discriminate, and actual clinical effectiveness were assessed through calibration curves, receiver operating characteristic (ROC) curves, and decision curve analysis (DCA), respectively. Finally, a strategy for categorizing SCT patients' risk was developed. RESULTS: This study included 909 SCT individuals. A novel nomogram was developed to forecast SCT patients' CSS, taking into account age, histological type, tumor grade, tumor stage, and radiotherapy. These factors were identified as independent prognostic indicators for CSS in SCT patients. Elderly SCT patients with distant metastasis, advanced tumor grade, received radiotherapy, and confirmed lymphoma have a poor prognosis. Meanwhile, the risk classification system could differentiate SCT patients and realize targeted management. CONCLUSIONS: The developed nomogram has the ability to accurately forecast the CSS in SCT individuals, aiding in precise decision-making during clinical practice, enhancing health planning, maximizing treatment advantages, and ultimately improving patient prognosis.

Cadmium negatively affects the growth and physiological status and the alleviation effects by exogenous selenium in silage maize (Zea mays L.).

Increasing soil cadmium (Cd) contamination is a serious threat to human food health and safety. In order to reduce Cd uptake and Cd toxicity in silage maize, hydroponic tests were conducted to investigate the effect of exogenous Cd on the toxicity of silage maize in this study. In the study, a combination of Cd (5, 20, 50, 80, and 10 µM) treatments was applied in a hydroponic system. With increasing Cd concentration, Cd significantly inhibited the total root length (RL), root surface area (SA), root volume (RV), root tip number (RT), and branching number (RF) of maize seedlings, which were reduced by 28.1 to 71.3%, 20.2 to 64.9%, 11.2 to 56.5%, 43.7 to 63.4%, and 38.2 to 72.6%, respectively. The excessive Cd accumulation inhibited biomass accumulation and reduced silage maize growth, photosynthesis, and chlorophyll content and activated the antioxidant systems, including increasing lipid peroxidation and stimulating catalase (CAT) and peroxidase (POD), but reduced the activity of superoxide dismutase (SOD) and ascorbate peroxidase (APX) in the root. Besides, selenium (Se) significantly decreased the Cd concentration of the shoot and root by 27.1% and 35.1% under Cd50, respectively. Our results reveal that exogenously applied Cd reduced silage maize growth and impaired photosynthesis. Whereas silage maize can tolerate Cd by increasing the concentration of ascorbate and glutathione and activating the antioxidant defense system, the application of exogenous selenium significantly reduced the content of Cd in silage maize.

Thiadiazole-Functionalized Th/Zr-UiO-66 for Efficient C2H2/CO2 Separation.

Adsorptive separation technology provides an effective approach for separating gases with similar physicochemical properties, such as the purification of acetylene (C2H2) from carbon dioxide (CO2). The high designability and tunability of metal-organic framework (MOF) adsorbents make them ideal design platforms for this challenging separation. Herein, we employ an isoreticular functionalization strategy to fine-tune the pore environment of Zr- and Th-based UiO-66 by the immobilization of the benzothiadiazole group via bottom-up synthesis. The functionalized UPC-120 exhibits an enhanced C2H2/CO2 separation performance, which is confirmed by adsorption isotherms, dynamic breakthrough curves, and theoretical simulations. The synergy of ligand functionalization and metal ion fine-tuning guided by isoreticular chemistry provides a new perspective for the design and development of adsorbents for challenging gas separation processes.

Gas-phase F-atom migration reaction of deprotonated N-fluoroarenesulfonamides.

RATIONALE: Recently N-Fluoroarenesulfonamides (ArSO2 NHF) were found to be promising precursors for the preparation of N-fluorobenzenesulfonimide derivatives without applying F2 . However, very few studies have discussed the mass spectrometric behaviors of ArSO2 NHF with N-F structure. METHODS: In this article, we applied high-resolution electrospray ionization tandem mass spectrometry (HR-ESI-MS/MS) to study the effect on the mass spectrometric behaviors of ArSO2 NHF after the introduction of the F-atom to the N-atom of ArSO2 NH2 . RESULTS: High-resolution electrospray ionization mass spectrometry (HR-ESI-MS) experiments showed that ArSO2 NHF produced only good signals in negative ion mode, and the dominating product ion SO2 F- at m/z 83 was observed in all HR-ESI-MS/MS of ArSO2 NF- with different substituents in the Ar group. The formation of the product ion SO2 F- was proof of the gas-phase F-atom migration rearrangement from the N-atom to the S-atom in ESI-MS/MS of ArSO2 NF- . CONCLUSION: To fully explain the gas-phase reaction mechanism from ArSO2 NF- to SO2 F- , we studied the HR-ESI-MS/MS of deprotonated ArSO2 NHF and also performed theoretical calculations. Both results confirmed that ArSO2 NF- first underwent Smiles rearrangement to yield intermediate I (INT1) ArNFSO2 - , and then the F-atom of ArNFSO2 - migrated from the N-atom to the S-atom to form intermediate II (INT2) ArN- SO2 F, which finally dissociated to SO2 F- at m/z 83 with loss of a neutral nitrene (ArN). All these results showed that the formation of the product ion SO2 F- from ArSO2 NF- was a common and intrinsic gas-phase reactivity of ArSO2 NF- .

Predictive value of serum fibroblast growth factor 19 and liver stiffness for intestinal failure associated liver disease-cholestasis.

BACKGROUND: Intestinal failure associated liver disease (IFALD)-cholestasis is a common complication of long-term parenteral nutrition (PN) in patients with intestinal failure (IF). The lack of effective early identification indicators often results in poor clinical outcomes. The objective of this study was to evaluate the predictive value of serum FGF19 and liver stiffness in IFALD-cholestasis. METHODS: Eligible adults diagnosed with IF were identified from Jinling Hospital in China. Diagnostic criteria for IFALD-cholestasis: total bilirubin >1 mg/dL and conjugated bilirubin >0.3 mg/dL for ≥6 months. Fasting blood specimens were prospectively collected and serum FGF19 concentrations were determined using ELISA and liver stiffness was measured by Two-dimensional shear wave elastography. Binary logistic regression analysis identified predictors of IFALD-cholestasis. Receiver operating characteristic (ROC) curves and areas under the ROC curves (AUROC) were used to evaluate the accuracy of serum FGF19 and liver stiffness in identifying IFALD-cholestasis. RESULTS: Of 203 study patients with IF, 70 (34.5%) were diagnosed with IFALD-cholestasis. The serum FGF19 levels in those with IFALD-cholestasis were significantly decreased compared with those in patients without, and liver stiffness was significantly increased (p < 0.001). Multivariate logistic regression analyses suggested that intestinal discontinuity, dependence on PN, liver stiffness >6.5 kPa, and serum FGF19 ≤107 pg/mL were independent risk factors for IFALD-cholestasis. The AUROC for serum FGF19 and liver stiffness, which indicate the occurrence of IFALD-cholestasis, were 0.810 and 0.714, respectively. Serum FGF19 had a superior predictive performance than liver stiffness (p < 0.05). CONCLUSION: Both low circulating serum FGF19 concentration and increased liver stiffness are excellent predictors of IFALD-cholestasis, but serum FGF19 is superior to increased liver stiffness in predicting IFALD-cholestasis.

Bioinspired Self-Assembly of Metalloporphyrins and Polyelectrolytes into Hierarchical Supramolecular Nanostructures for Enhanced Photocatalytic H2 Production in Water.

Polypeptides, as natural polyelectrolytes, are assembled into tailored proteins to integrate chromophores and catalytic sites for photosynthesis. Mimicking nature to create the water-soluble nanoassemblies from synthetic polyelectrolytes and photocatalytic molecular species for artificial photosynthesis is still rare. Here, we report the enhancement of the full-spectrum solar-light-driven H2 production within a supramolecular system built by the co-assembly of anionic metalloporphyrins with cationic polyelectrolytes in water. This supramolecular photocatalytic system achieves a H2 production rate of 793 and 685 µmol h-1 g-1 over 24 h with a combination of Mg or Zn porphyrin as photosensitizers and Cu porphyrin as a catalyst, which is more than 23 times higher than that of free molecular controls. With a photosensitizer to catalyst ratio of 10000 : 1, the highest H2 production rate of >51,700 µmol h-1 g-1 with a turnover number (TON) of >1,290 per molecular catalyst was achieved over 24 h irradiation. The hierarchical self-assembly not only enhances photostability through forming ordered stackings of the metalloporphyrins but also facilitates both energy and electron transfer from antenna molecules to catalysts, and therefore promotes the photocatalysis. This study provides structural and mechanistic insights into the self-assembly enhanced photostability and catalytic performance of supramolecular photocatalytic systems.

Citrobacter enshiensis sp. nov., isolated from seleniferous soil.

Two Gram-stain-negative, facultative anaerobic, rod-shaped bacterial strains, S171T and S2-9, were isolated from seleniferous soil in China. Comprehensive phylogenetic analyses based on 16S rRNA genes, multilocus sequences and whole genome sequences indicated that the two strains belonged to the genus Citrobacter. The average nucleotide identity (ANI) and digital DNA-DNA hybridization (dDDH) values of strains S171T and S2-9 with the closest relative Citrobacter koseri NCTC 10786T were 83.6-83.7% and 27.7-27.8 %, respectively, which were below the species cutoff values. The ANI and dDDH values between the two strains were 97.9% and 84.8 %, respectively. The biochemical characteristics revealed that selenite tolerance, H2S and indole production, arginine dihydrolase, ornithine decarboxylase, as well as acid production from carbon sources such as d-sorbitol and arbutin are distinctive features of the two strains. Based on these results, strain S171T and strain S2-9 represent a novel species of the genus Citrobacter, for which the name Citrobacter enshiensis sp. nov. is proposed, with strain S171T (=GDMCC 1.3637T=JCM 35851T) as the type strain. The genome size of strain S171T was 4.92 Mb with a G+C content of 52.6 mol%. The genome size of strain S2-9 was 4.89 Mb with a G+C content of 52.6 mol%.