Carbon emissions in China's steel industry from a life cycle perspective: Carbon footprint insights.

China is the most important steel producer in the world, and its steel industry is one of the most carbon-intensive industries in China. Consequently, research on carbon emissions from the steel industry is crucial for China to achieve carbon neutrality and meet its sustainable global development goals. We constructed a carbon dioxide (CO2) emission model for China's iron and steel industry from a life cycle perspective, conducted an empirical analysis based on data from 2019, and calculated the CO2 emissions of the industry throughout its life cycle. Key emission reduction factors were identified using sensitivity analysis. The results demonstrated that the CO2 emission intensity of the steel industry was 2.33 ton CO2/ton, and the production and manufacturing stages were the main sources of CO2 emissions, accounting for 89.84% of the total steel life-cycle emissions. Notably, fossil fuel combustion had the highest sensitivity to steel CO2 emissions, with a sensitivity coefficient of 0.68, reducing the amount of fossil fuel combustion by 20% and carbon emissions by 13.60%. The sensitivities of power structure optimization and scrap consumption were similar, while that of the transportation structure adjustment was the lowest, with a sensitivity coefficient of less than 0.1. Given the current strategic goals of peak carbon and carbon neutrality, it is in the best interest of the Chinese government to actively promote energy-saving and low-carbon technologies, increase the ratio of scrap steel to steelmaking, and build a new power system.

Identification of novel diarylpyrimidine derivatives as potent HIV-1 non-nucleoside reverse transcriptase inhibitors against wild-type and K103N mutant viruses.

HIV-1 non-nucleoside reverse transcriptase inhibitors (NNRTIs) play a crucial role in combination antiretroviral therapy (cART). To further enhance their antiviral activity and anti-resistance properties, we developed a series of novel NNRTIs, by specifically targeting tolerant region I of the NNRTI binding pocket. Among them, compound 9t-2 displayed excellent anti-HIV-1 potency against wild-type and prevalent mutant strains with EC50 values between 0.0019 and 0.012 µM. This outperformed the positive drugs ETR, NVP and RPV. Aslo, ELISA results confirmed that these compounds can effectively inhibit the activity of HIV-1 RT. Molecular dynamics (MD) simulation studies indicated that the thiomorpholine-1,1-dioxide moiety of 9t-2 is capable of establishing additional interactions with residues P225, F227 and P236 in the tolerant region I, which contributed to its enhanced activity. Compound 9t-2 possessed negligible inhibitory effect on the five main CYP isoenzymes (IC50 > 10 µM), indicating a low potential for inducing CYP-mediated drug-drug interactions. In conclusion, compound 9t-2, with its enhanced anti-resistance properties, stands out as a promising lead compound for further optimization towards discovering the new generation of anti-HIV agents.

Magnetically Enhanced Oxygen Evolution Reaction in Mild Alkaline Electrolytes by Building Catalysts on Magnetic Frame.

Under large current densities, the excessive hydroxide ion (OH) consumption hampers alkaline water splitting involving the oxygen evolution reaction (OER). High OH concentration (≈30 wt.%) is often used to enhance the catalytic activity of OER, but it also leads to higher corrosion in practical systems. To achieve higher catalytic activity in low OH concentration, catalysts on magnetic frame (CMF) are built to utilize the local magnetic convection induced from the host frame's magnetic field distributions. This way, a higher reaction rate can be achieved in relatively lower OH concentrations. A CMF model system with catalytically active CoFeOx nanograins grown on the magnetic Ni foam is demonstrated. The OER current of CoFeOx@NF receives ≈90% enhancement under 400 mT (900 mA cm-2 at 1.65 V) compared to that in zero field, and exhibits remarkable durability over 120 h. As a demonstration, the water-splitting performance sees a maximum 45% magnetic enhancement under 400 mT in 1 m KOH (700 mA cm-2 at 2.4 V), equivalent to the concentration enhancement of the same electrode in a more corrosive 2 m KOH electrolyte. Therefore, the catalyst-on-magnetic-frame strategy can make efficient use of the catalysts and achieve higher catalytic activity in low OH concentration by harvesting local magnetic convection.

RpedOBP1 plays key roles in aggregation pheromones reception of the Riptortus pedestris.

Riptortus pedestris (Hemiptera: Alydidae) is a notable soybean pest, with diapause and non-diapause individuals showing different sensitivities to aggregation pheromones. This study aimed to investigate how R. pedestris detects aggregation pheromones through electroantennogram (EAG) and behavioral experiments, transcriptome sequencing and qRT-PCR, as well as competitive fluorescence-binding assay. Results indicated that diapausing females and males of R. pedestris exhibited a heightened EAG response and were more attracted to the aggregation pheromone components compared to their non-diapause counterparts. Transcriptome sequencing and qRT-PCR analyses revealed significantly higher expression of RpedOBP1 in the antennae of diapause females and males compared to non-diapausing R. pedestris. The competitive fluorescence-binding assay demonstrated that RpedOBP1 displayed the strongest binding affinity to E2HE2H, suggesting its crucial role in recognizing the aggregation pheromone. These findings have the potential to inform the development of integrated pest management strategies utilizing behavioral approaches for bean bug control.

Investigating the impact of temporal instability in smart roadway retrofitting on terrain-related crash injury severity.

The advancement of intelligent road systems in developing countries poses unique challenges in identifying risk factors and implementing safety strategies. The variability of factors affecting crash injury severity leads to different risks across levels of roadway smartness, especially in hazardous terrains, complicating the adaptation of smart technologies. Therefore, this study investigates the temporal instability of factors affecting injury severities in crashes across various terrains, with a focus on the evolution of road smartness. Crash data from selected complex terrain regions in Shaanxi Province during smart road adaptation were used, and categorized into periods before, during, and after smart road implementations. A series of mixed logit models were employed to account for unobserved heterogeneity in mean and variance, and likelihood ratio tests were conducted to assess the spatio-temporal instability of model parameters across different topographic settings and smart processes. Moreover, a comparison between partially constrained and unconstrained temporal modeling approaches was made. The findings reveal significant differences in injury severity determinants across terrain conditions as roadway intelligence progressed. On the other hand, certain factors like pavement damage, truck and pedestrian involvement were identified that had relatively stable effects on crash injury severities. Out-of-sample predictions further emphasize the need for modeling across terrain and roadway development stages. These insights are crucial for developing tailored safety measures for smart road retrofitting in different terrain conditions, thereby supporting the transition towards smarter road systems in developing regions.

Design and optimization of piperidine-substituted thiophene[3,2-d]pyrimidine-based HIV-1 NNRTIs with improved drug resistance and pharmacokinetic profiles.

HIV-1 reverse transcriptase (RT) has received great attention as an attractive therapeutic target for acquired immune deficiency syndrome (AIDS), but the inevitable drug resistance and side effects have always been major challenges faced by non-nucleoside reverse transcriptase inhibitors (NNRTIs). This work aimed to identify novel chemotypes of anti-HIV-1 agents with improved drug-resistance profiles, reduced toxicity, and excellent druggability. A series of diarylpyrimidine (DAPY) derivatives were prepared via structural modifications of the leads K-5a2 and 25a. Among them, 15a with dimethylphosphine oxide moiety showed the most prominent antiviral potency against all of the tested viral panel, being 1.6-fold (WT, EC50 = 1.75 nmol/L), 3.0-fold (L100I, EC50 = 2.84 nmol/L), 2.4-fold (K103N, EC50 = 1.27 nmol/L), 3.3-fold (Y181C, EC50 = 5.38 nmol/L), 2.9-fold (Y188L, EC50 = 7.96 nmol/L), 2.5-fold (E138K, EC50 = 4.28 nmol/L), 4.8-fold (F227L/V106A, EC50 = 3.76 nmol/L) and 5.3-fold (RES056, EC50 = 15.8 nmol/L) more effective than that of the marketed drug ETR. Molecular docking results illustrated the detailed interactions formed by compound 15a and WT, F227L/V106A, and RES056 RT. Moreover, 15a·HCl carried outstanding pharmacokinetic (t 1/2 = 1.32 h, F = 40.8%) and safety profiles (LD50 > 2000 mg/kg), which demonstrated that 15a HCl is a potential anti-HIV-1 drug candidate.

Chondroitin Sulfate Derivative Cross-Linking of Decellularized Heart Valve for the Improvement of Mechanical Properties, Hemocompatibility, and Endothelialization.

Tissue-engineered heart valve (TEHV) has emerged as a prospective alternative to conventional valve prostheses. The decellularized heart valve (DHV) represents a promising TEHV scaffold that preserves the natural three-dimensional structure and retains essential biological activity. However, the limited mechanical strength, fast degradation, poor hemocompatibility, and lack of endothelialization of DHV restrict its clinical use, which is necessary for ensuring its long-term durability. Herein, we used oxidized chondroitin sulfate (ChS), one of the main components of the extracellular matrix with various biological activities, to cross-link DHV to overcome the above problems. In addition, the ChS-adipic dihydrazide was used to react with residual aldehyde groups, thus preventing potential calcification. The results indicated notable enhancements in mechanical properties and resilience against elastase and collagenase degradation in vitro as well as the ability to withstand extended periods of storage without compromising the structural integrity of valve scaffolds. Additionally, the newly cross-linked valves exhibited favorable hemocompatibility in vitro and in vivo, thereby demonstrating exceptional biocompatibility. Furthermore, the scaffolds exhibited traits of gradual degradation and resistance to calcification through a rat subcutaneous implantation model. In the rat abdominal aorta implantation model, the scaffolds demonstrated favorable endothelialization, commendable patency, and a diminished pro-inflammatory response. As a result, the newly constructed DHV scaffold offers a compelling alternative to traditional valve prostheses, which potentially advances the field of TEHV.

[Carbon Footprint of Spent Ternary Lithium-Ion Battery Waste Recycling].

Road transport is the primary source of greenhouse gas emissions in China's transportation field. As an important means to achieve the "double carbon" goal in the transportation field, the new energy automobile industry will face a large number of power battery scrapping in the future. In order to quantitatively assess the carbon emission reduction benefits generated by the spent ternary lithium-ion battery waste recycling industry, the carbon footprint accounting model of spent ternary lithium-ion battery waste recycling and utilization was constructed from the life cycle perspective. By optimizing the power structure and transportation structure, the carbon emission reduction potential of spent ternary lithium-ion battery waste recycling was predicted and evaluated. In addition, the uncertainty analysis was conducted using the propagation of uncertainty equation to ensure the reliability and effectiveness of the carbon footprint results. The results showed that the current carbon footprint of Chinese enterprises using wet technology to recover 1 kg waste lithium batteries was -2 760.90 g (directional recycling process) and -3 752.78 g (recycling process), and the uncertainty of the carbon footprint was 16 % (directional recycling process) and 15 % (recycling process), respectively. From the analysis of carbon emission contribution, the regenerated product stage was the primary source of carbon reduction in the wet recycling and utilization of waste ternary lithium batteries, whereas the battery acquisition, disassembly, and end treatment stages were the main sources of carbon increase. Compared to optimizing the transportation structure, optimizing the power structure could effectively achieve greater carbon emission reduction potential. Under the collaborative optimization scenario, compared to that before optimization, 14 %-19 % carbon emission reduction could be achieved. Compared with native products, the directional circulation process and recycling process could achieve 9 % and 11 % emission reduction potential, respectively.

R-Napropamide Potentially Regulates Cadmium Accumulation in Arabidopsis Shoots through Transport Channel Modulation.

Heavy metal contamination in soils poses a significant environmental threat to human health. This study examines the effects of the chiral herbicide napropamide (NAP) on Arabidopsis thaliana, focusing on growth metrics and cadmium (Cd) accumulation. R-NAP does not adversely affect plant growth compared to the control, whereas S-NAP significantly reduces root length and fresh weight. Notably, R-NAP markedly increases Cd accumulation in the shoots, exceeding levels observed in the control and S-NAP. This increase coincides with reduced photosynthetic efficiency. Noninvasive electrode techniques reveal a higher net Cd absorption flux in the root mature zone under R-NAP than S-NAP, although similar to the control. Transcriptomic analysis highlights significant stereoisomer differences in Cd transporters, predominantly under R-NAP treatment. SEM and molecular docking simulations support that R-NAP primarily upregulates transporters such as HMA4. The results suggest careful management of herbicides like R-NAP in contaminated fields to avoid excessive heavy metal buildup in crops.

A dose-dependent effect of UV-328 on photosynthesis: Exploring light harvesting and UV-B sensing mechanisms.

Benzotriazole ultraviolet (UV) stabilizers (BUVs) have emerged as significant environmental contaminants, frequently detected in various ecosystems. While the toxicity of BUVs to aquatic organisms is well-documented, studies on their impact on plant life are scarce. Plants are crucial as they provide the primary source of energy and organic matter in ecosystems through photosynthesis. This study investigated the effects of UV-328 (2-(2-hydroxy-4',6'-di-tert-amylphenyl) benzotriazole) on plant growth indices and photosynthesis processes, employing conventional physiological experiments, RNA sequencing (RNA-seq) analysis, and computational methods. Results demonstrated a biphasic response in plant biomass and the maximum quantum yield of PS II (Fv/Fm), showing improvement at a 50 µM UV-328 treatment but reduction under 150 µM UV-328 exposure. Additionally, disruption in thylakoid morphology was observed at the higher concentration. RNA-seq and qRT-PCR analysis identified key differentially expressed genes (light-harvesting chlorophyll-protein complex Ⅰ subunit A4, light-harvesting chlorophyll b-binding protein 3, UVR8, and curvature thylakoid 1 A) related to photosynthetic light harvesting, UV-B sensing, and chloroplast structure pathways, suggesting they may contribute to the observed alterations in photosynthesis activity induced by UV-328 exposure. Molecular docking analyses further supported the binding affinity between these proteins and UV-328. Overall, this study provided comprehensive physiological and molecular insights, contributing valuable information to the evaluation of the potential risks posed by UV-328 to critical plant physiological processes.

Discovery of low-molecular-weight phenylalanine derivatives as novel HIV capsid modulators with improved antiretroviral activity and metabolic stability.

The HIV capsid (CA) protein is a promising target for anti-AIDS treatment due to its critical involvement in viral replication. Herein, we utilized the well-documented CA inhibitor PF74 as our lead compound and designed a series of low-molecular-weight phenylalanine derivatives. Among them, compound 7t exhibited remarkable antiviral activity with a high selection index (EC50 = 0.040 µM, SI = 2815), surpassing that of PF74 (EC50 = 0.50 µM, SI = 258). Furthermore, when evaluated against the HIV-2 strain, 7t (EC50 = 0.13 µM) demonstrated approximately 14-fold higher potency than that of PF74 (EC50 = 1.76 µM). Insights obtained from surface plasmon resonance (SPR) revealed that 7t exhibited stronger target affinity to the CA hexamer and monomer in comparison to PF74. The potential interactions between 7t and the HIV-1 CA were further elucidated using molecular docking and molecular dynamics simulations, providing a plausible explanation for the enhanced target affinity with 7t over PF74. Moreover, the metabolic stability assay demonstrated that 7t (T1/2 = 77.0 min) significantly outperforms PF74 (T1/2 = 0.7 min) in human liver microsome, exhibiting an improvement factor of 110-fold. In conclusion, 7t emerges as a promising drug candidate warranting further investigation.

Synergistic Effect of Ni/Ni(OH)2 Core-Shell Catalyst Boosts Tandem Nitrate Reduction for Ampere-Level Ammonia Production.

Electrocatalytic reduction of nitrate to ammonia provides a green alternate to the Haber-Bosch method, yet it suffers from sluggish kinetics and a low yield rate. The nitrate reduction follows a tandem reaction of nitrate reduction to nitrite and subsequent nitrite hydrogenation to generate ammonia, and the ammonia Faraday efficiency (FE) is limited by the competitive hydrogen evolution reaction. Herein, we design a heterostructure catalyst to remedy the above issues, which consists of Ni nanosphere core and Ni(OH)2 nanosheet shell (Ni/Ni(OH)2). In situ Raman spectroscopy reveals Ni and Ni(OH)2 are interconvertible according to the applied potential, facilitating the cascade nitrate reduction synergistically. Consequently, it attains superior electrocatalytic nitrate reduction performance with an ammonia FE of 98.50 % and a current density of 0.934 A cm-2 at -0.476 V versus reversible hydrogen electrode, and exhibits an average ammonia yield rate of 84.74 mg h-1 cm-2 during the 102-hour stability test, which is highly superior to the reported catalysts tested under similar conditions. Density functional theory calculations corroborate the synergistic effect of Ni and Ni(OH)2 in the tandem reaction of nitrate reduction. Moreover, the Ni/Ni(OH)2 catalyst also possesses good capability for methanol oxidation and thus is used to establish a system coupling with nitrate reduction.

Are electric vehicles really the optimal option for the transportation sector in China to approach pollution reduction and carbon neutrality goals?

Profound worldwide fleet electrification is thought to be the primary route for achieving the target of carbon neutrality. However, when and how electrification can help mitigate environmental impacts and carbon emissions in the transport sector remains unclear. Herein, the overall life-cycle environmental impacts and carbon saving range of two typical A-class vehicles in China, including electric vehicle (EV) and internal combustion engine vehicle (ICEV), were quantified by the life cycle assessment model for endpoint damage with localization parameters. The results showed that the EV outperformed the ICEV for the total environment impact after a travel distance of 39,153 km and for carbon emissions after 32,292 km. The ICEV was more carbon-friendly only when the driving distance was less than 3229 km/a. Considering a full lifespan travel distance of 150,000 km, the whole life-cycle average environmental impacts of EV and ICEV were calculated as 8.6 and 17.5 mPt/km, respectively, but the EV had 2.3 times higher impacts than the ICEV in the production phase. In addition, the EV unit carbon emission was 140 g/km, 46.8% lower than that of the ICEV. Finally, three potential reduction scenarios were considered: cleaner power mix, energy efficiency improvement and composite scenario. These scenarios contributed 19.1%, 13.0% and 32.1% reductions, respectively. However, achieving carbon peak and neutrality goals in China remains a great challenge unless fossil fuels are replaced by renewable energy. The research can provide scientific reference for the method and practice of emission reduction link identification, eco-driving choice and emission reduction path formulation.

Structure-based design of diarylpyrimidines and triarylpyrimidines as potent HIV-1 NNRTIs with improved metabolic stability and drug resistance profiles.

Non-nucleoside reverse transcriptase inhibitors (NNRTIs) are an important component of anti-acquired immunodeficiency syndrome treatment regimen. In the present work, with the previously reported compound K-16c as lead, a series of novel 2,4,5-trisubstituted pyrimidine derivatives were designed based on the cocrystal structure of K-16c/RT, with the aim to improve the anti-human immunodeficiency virus type-1 (HIV-1) activities and metabolic stability properties. Compound 11b1 exhibited the most potent antiviral activity against wild-type (WT) and a panel of single mutant HIV-1 strains (EC50 = 2.4-12.4 nM), being superior to or comparable to those of the approved drug etravirine. Meanwhile, 11b1 exhibited moderate cytotoxicity (CC50 = 4.96 µM) and high selectivity index (SI = 1189) toward HIV-1 WT strain. As for HIV-1 RT inhibition test, 11b1 possessed excellent inhibitory potency (IC50 = 0.04 µM) and confirmed its target was RT. Moreover, the molecular dynamics simulation was performed to elucidate the improved drug resistance profiles. Moreover, 11b1 was demonstrated with favorable safety profiles and pharmacokinetic properties in vivo, indicating that 11b1 is a potential anti-HIV-1 drug candidate worthy of further development.

Shear stress activates the Piezo1 channel to facilitate valvular endothelium-oriented differentiation and maturation of human induced pluripotent stem cells.

Valvular endothelial cells (VECs) derived from human induced pluripotent stem cells (hiPSCs) provide an unlimited cell source for tissue engineering heart valves (TEHVs); however, they are limited by their low differentiation efficiency and immature function. In our study, we applied unidirectional shear stress to promote hiPSCs differentiation into valvular endothelial-like cells (VELs). Compared to the static group, shear stress efficiently promoted the differentiation and functional maturation of hiPSC-VELs, as demonstrated by the efficiency of endothelial differentiation reaching 98.3% in the high shear stress group (45 dyn/cm2). Furthermore, we found that Piezo1 served as a crucial mechanosensor for the differentiation and maturation of VELs. Mechanistically, the activation of Piezo1 by shear stress resulted in the influx of calcium ions, which in turn initiated the Akt signaling pathway and promoted the differentiation of hiPSCs into mature VELs. Moreover, VELs cultured on decellularized heart valves (DHVs) exhibited a notable propensity for proliferation, robust adhesion properties, and antithrombotic characteristics, which were dependent on the activation of the Piezo1 channel. Overall, our study demonstrated that proper shear stress activated the Piezo1 channel to facilitate the differentiation and maturation of hiPSC-VELs via the Akt pathway, providing a potential cell source for regenerative medicine, drug screening, pathogenesis, and disease modeling. STATEMENT OF SIGNIFICANCE: This is the first research that systematically analyzes the effect of shear stress on valvular endothelial-like cells (VELs) derived from human induced pluripotent stem cells (hiPSCs). Mechanistically, unidirectional shear stress activates Piezo1, resulting in an elevation of calcium levels, which triggers the Akt signaling pathway and then facilitates the differentiation of functional maturation VELs. After exposure to shear stress, the VELs exhibited enhanced proliferation, robust adhesion capabilities, and antithrombotic characteristics while being cultured on decellularized heart valves. Thus, it is of interest to develop hiPSCs-VELs using shear stress and the Piezo1 channel provides insights into the functional maturation of valvular endothelial cells, thereby serving as a catalyst for potential applications in the development of therapeutic and tissue-engineered heart valves in the future.

Morusin Alleviates Aortic Valve Calcification by Inhibiting Valve Interstitial Cell Senescence Through Ccnd1/Trim25/Nrf2 Axis.

The senescence of aortic valve interstitial cells (VICs) plays a critical role in the progression of calcific aortic valve disease (CAVD). However, the precise mechanisms underlying the senescence of VICs remain unclear, demanding the identification of a novel target to mitigate this process. Previous studies have highlighted the anti-aging potential of morusin. Thus, this study aimed to explore the therapeutic potential of morusin in CAVD. Cellular experiments reveal that morusin effectively suppresses cellular senescence and cause a shift toward osteogenic differentiation of VICs in vitro. Mechanistically, morusin activate the Nrf2-mediated antiaging signaling pathway by downregulating CCND1 expression and aiding Keap1 degradation through Trim 25. This activation lead to the upregulated expression of antioxidant genes, thus reducing reactive oxygen species production and thereby preventing VIC osteogenic differentiation. In vivo experiments in ApoE-/- mice on a high-fat Western diet demonstrate the positive effect of morusin in mitigating aortic valve calcification. These findings emphasize the antiaging properties of morusin and its potential as a therapeutic agent for CAVD.

Comparative phylogenetic analysis of the mediator complex subunit in asparagus bean (Vigna unguiculata ssp. sesquipedialis) and its expression profile under cold stress.

BACKGROUND: The mediator complex subunits (MED) constitutes a multiprotein complex, with each subunit intricately involved in crucial aspects of plant growth, development, and responses to stress. Nevertheless, scant reports pertain to the VunMED gene within the context of asparagus bean (Vigna unguiculata ssp. sesquipedialis). Establishing the identification and exploring the responsiveness of VunMED to cold stress forms a robust foundation for the cultivation of cold-tolerant asparagus bean cultivars. RESULTS: Within this study, a comprehensive genome-wide identification of VunMED genes was executed in the asparagus bean cultivar 'Ningjiang3', resulting in the discovery of 36 distinct VunMED genes. A phylogenetic analysis encompassing 232 MED genes from diverse species, including Arabidopsis, tomatoes, soybeans, mung beans, cowpeas, and asparagus beans, underscored the highly conserved nature of MED gene sequences. Throughout evolutionary processes, each VunMED gene underwent purification and neutral selection, with the exception of VunMED19a. Notably, VunMED9/10b/12/13/17/23 exhibited structural variations discernible across four cowpea species. Divergent patterns of temporal and spatial expression were evident among VunMED genes, with a prominent role attributed to most genes during early fruit development. Additionally, an analysis of promoter cis-acting elements was performed, followed by qRT-PCR assessments on roots, stems, and leaves to gauge relative expression after exposure to cold stress and subsequent recovery. Both treatments induced transcriptional alterations in VunMED genes, with particularly pronounced effects observed in root-based genes following cold stress. Elucidating the interrelationships between subunits involved a preliminary understanding facilitated by correlation and principal component analyses. CONCLUSIONS: This study elucidates the pivotal contribution of VunMED genes to the growth, development, and response to cold stress in asparagus beans. Furthermore, it offers a valuable point of reference regarding the individual roles of MED subunits.

Magnetic Field Enhanced Oxygen Reduction Reaction via Oxygen Diffusion Speedup.

The mass-transfer of oxygen in liquid phases (including in the bulk electrolyte and near the electrode surface) is a critical step to deliver oxygen to catalyst sites (especially immersed catalyst sites) and use the full capacity of oxygen reduction reaction (ORR). Despite the extensive efforts of optimizing the complex three-phase reaction interfaces to enhance the gaseous oxygen transfer, strong limitations remain due to oxygen's poor solubility and slow diffusion in electrolytes. Herein, a magnetic method for boosting the directional hydrodynamic pumping of oxygen toward immersed catalyst sites is demonstrated which allows the ORR to reach otherwise inaccessible catalytic regions where high currents normally would have depleted oxygen. For Pt foil electrodes without forced oxygen saturation in KOH electrolytes, the mass-transfer-limited current densities can be improved by 60% under an external magnetic field of 435 mT due to the synergistic effect between bulk- and surface-magnetohydrodynamic (MHD) flows induced by Lorentz forces. The residual magnetic fields are further used at the surface of magnetic materials (such as CoPt alloys and Pt/FeCo heterostructures) to enhance the surface-MHD effect, which helps to retain part of the ORR enhancement permanently without applying external magnetic fields.

Morphology and distribution of sensilla on antennae and mouthparts of the adult bruchid beetles, Bruchidius coreanus (Coleoptera: Bruchidae).

Bruchidius coreanus is a serious pest on Gleditsia sinensis Lam during seed storage, causing significant losses to their yield in southwest China. To gain insight into their behavioral mechanisms, the external morphology, ultrastructure, and distribution of sensilla on antennae, maxillary palps, and labial palps of both male and female B. coreanus were observed using a scanning electron microscope. The results revealed that both male and female adults had serrated antennae comprising a scape, a pedicel, and nine flagellomeres (F1-F9). There were eight types and seven subtypes of antenna sensilla observed in both sexes, including Böhm sensilla (BS), two subtypes of sensilla chaetica (SC1 and SC2), two subtypes of sensilla trichodea (ST1 and ST2), three subtypes of sensilla basiconica (SB1, SB2, and SB3), sensilla auricillica (SA), sensilla styloconicum (SS), capitate pegs (CP), and sensilla cavity (SCa). The average length of BS and ST (ST1 and ST2) showed significant differences between males and females. Furthermore, the number of SC (SC1 and SC2), ST1, and SCa differed significantly between the sexes. Four types of sensilla were found on the maxillary palps and labial palps, with the length of ST on these palps significantly differing between males and females. Additionally, SS on male labial palps was significantly longer than in females. The number of SC significantly differed between the male and female maxillary palps and labial palps, while ST and SS showed significant differences in the maxillary palps. These findings will contribute to further electrophysiological recording and behavioral research. RESEARCH HIGHLIGHTS: The external morphology and distribution of various sensilla on the antennae, maxillary palps, and labial palps of Bruchidius coreanus were described. Eight types and seven subtypes of antenna sensilla were observed on the antennae, while four types of sensilla were observed on the maxillary palps and labial palps. The capitate pegs were found exclusively on the antennae of female B. coreanus.

[Life Cycle Carbon Emission Accounting and Emission Reduction Potential Assessment of Steel Industry].

The steel industry is one of the most carbon-intensive industries in China. To analyze the carbon emission and carbon reduction potential of the steel industry in the life cycle, a carbon emission accounting model was built from the perspective of the life cycle. Taking the year 2020 as an example, an empirical analysis was carried out to predict and evaluate the carbon reduction potential of the steel industry in the life cycle by optimizing four variables, namely, scrap usage, fossil fuel combustion, electric power carbon footprint factor, and clean transportation proportion. At the same time, sensitivity analysis was used to determine the key degree of factors affecting carbon emission reduction in the life cycle of steel. The results showed that in 2020, the total life cycle CO2 emissions of the steel industry in China was approximately 2.404 billion tons, of which the acquisition and processing of raw materials were the key links in the carbon emissions of the steel industry, accounting for more than 98% of the total life cycle CO2 emissions of the steel industry. From the analysis of CO2 emission source categories, fossil fuel savings and outsourcing power cleaning were the top priorities of carbon reduction in the steel industry. By 2025, the steel industry could achieve 20%, 6%, 5%, and 1% carbon emission reduction potential by respectively promoting low-carbon technology, optimizing the power structure, increasing the number of steel scraps, and increasing the proportion of clean transportation. The fossil fuel combustion had the most significant impact on the life cycle CO2 emissions of the steel industry, followed by the electric power carbon footprint factor and scrap steelmaking usage. With regard to low-carbon technologies in the steel industry, in the short term, the promotion of low-carbon technologies in the steel rolling process and blast furnace ironmaking process should be the main focus. Later, with the gradual increase in the proportion of electric furnace steelmaking, the promotion of low-carbon technologies in the electric furnace steelmaking process will significantly improve the carbon emission reduction potential of the steel industry throughout its life cycle.