Leucine as a moisture-protective excipient in spray-dried protein/trehalose formulation.

The incorporation of leucine (Leu), a hydrophobic amino acid, into pharmaceutically relevant particles via spray-drying can improve the physicochemical and particulate properties, stability, and ultimately bioavailability of the final product. More specifically, Leu has been proposed to form a shell on the surface of spray-dried (SD) particles. The aim of this study was to explore the potential of Leu in the SD protein/trehalose (Tre) formulation to control the water uptake and moisture-induced recrystallization of amorphous Tre, using lysozyme (LZM) as a model protein. LZM/Tre (1:1, w/w) were dissolved in water with varied amounts of Leu (0 - 40%, w/w) and processed by spray-drying. The solid form, residual moisture content (RMC), hygroscopicity, and morphology of SD LZM/Tre/Leu powders were evaluated, before and after storage under 22°C/55% RH conditions for 90 and 180 days. The X-ray powder diffraction results showed that Leu was in crystalline form when the amount of Leu in the formulation was at least 20% (w/w). Thermo-gravimetric analysis and scanning electron microscopy results showed that 0%, 5%, and 10% Leu formulations led to comparable RMC and raisin-like round particles. In contrast, higher Leu contents resulted in a lower RMC and increased surface corrugation of the SD particles. Dynamic vapor sorption analysis showed that in the 0% Leu formulation, partial recrystallization of amorphous Tre to crystalline Tre·dihydrate occurred, and the addition of as little as 5% Leu could inhibit the recrystallization of amorphous Tre during the water sorption/desorption cycle. In addition, after storage, formulations with higher Leu contents resulted in less water uptake. Rather than recrystallization of amorphous Tre in 0%, 5%, and 10% Leu formulations, recrystallization of amorphous Leu was observed in both 5% and 10% Leu formulations after storage. In summary, our study demonstrated that the addition of Leu has the potential to reduce water uptake and inhibit moisture-induced recrystallization of amorphous Tre in the SD protein/Tre powder system.

An individualised 3D computational flow and particle model to predict the deposition of inhaled medicines - A case study using a nebuliser.

BACKGROUND AND OBJECTIVE: Drug inhalation is generally accepted as the preferred administration method for treating respiratory diseases. To achieve effective inhaled drug delivery for an individual, it is necessary to use an interdisciplinary approach that can cope with inter-individual differences. The paper aims to present an individualised pulmonary drug deposition model based on Computational Fluid and Particle Dynamics simulations within a time frame acceptable for clinical use. METHODS: We propose a model that can analyse the inhaled drug delivery efficiency based on the patient's airway geometry as well as breathing pattern, which has the potential to also serve as a tool for a sub-regional diagnosis of respiratory diseases. The particle properties and size distribution are taken for the case of drug inhalation by using nebulisers, as they are independent of the patient's breathing pattern. Finally, the inhaled drug doses that reach the deep airways of different lobe regions of the patient are studied. RESULTS: The numerical accuracy of the proposed model is verified by comparison with experimental results. The difference in total drug deposition fractions between the simulation and experimental results is smaller than 4.44% and 1.43% for flow rates of 60 l/min and 15 l/min, respectively. A case study involving a COVID-19 patient is conducted to illustrate the potential clinical use of the model. The study analyses the drug deposition fractions in relation to the breathing pattern, aerosol size distribution, and different lobe regions. CONCLUSIONS: The entire process of the proposed model can be completed within 48 h, allowing an evaluation of the deposition of the inhaled drug in an individual patient's lung within a time frame acceptable for clinical use. Achieving a 48-hour time window for a single evaluation of patient-specific drug delivery enables the physician to monitor the patient's changing conditions and potentially adjust the drug administration accordingly. Furthermore, we show that the proposed methodology also offers a possibility to be extended to a detection approach for some respiratory diseases.

Amino acids as stabilizers for lysozyme during the spray-drying process and storage.

Amino acids (AAs) have been used as excipients in protein formulations both in solid and liquid state products due to their stabilizing effect. However, the mechanisms by which they can stabilize a protein have not been fully elucidated yet. The purpose of this study was to investigate the effect of AAs with distinct physicochemical properties on the stability of a model protein (lysozyme, LZM) during the spray-drying process and subsequent storage. Molecular descriptor based multivariate data analysis was used to select distinct AAs from the group of 20 natural AAs. Then, LZM and the five selected AAs (1:1 wt ratio) were spray-dried (SD). The solid form, residual moisture content (RMC), hygroscopicity, morphology, secondary/tertiary structure and enzymatic activity of LZM were evaluated before and after storage under 40 °C/75 % RH for 30 days. Arginine (Arg), leucine (Leu), glycine (Gly), tryptophan (Trp), aspartic acid (Asp) were selected because of their distinct properties by using principal component analysis (PCA). The SD LZM powders containing Arg, Trp, or Asp were amorphous, while SD LZM powders containing Leu or Gly were crystalline. Recrystallization of Arg, Trp, Asp and polymorph transition of Gly were observed after the storage under accelerated conditions. The morphologies of the SD particles vary upon the different AAs formulated with LZM, implying different drying kinetics of the five model systems. A tertiary structural change of LZM was observed in the SD powder containing Arg, while a decrease in the enzymatic activity of LZM was observed in the powders containing Arg or Asp after the storage. This can be attributed to the extremely basic and acidic conditions that Arg and Asp create, respectively. This study suggests that when AAs are used as stabilizers instead of traditional disaccharides, not only do classic vitrification theory and water replacement theory play a role, but the microenvironmental pH conditions created by basic or acidic AAs in the starting solution or during the storage of solid matter are also crucial for the stability of SD protein products.

Mannose-Decorated Solid-Lipid Nanoparticles for Alveolar Macrophage Targeted Delivery of Rifampicin.

Alveolar macrophages play a vital role in a variety of lung diseases, including tuberculosis. Thus, alveolar macrophage targeted anti-tubercular drug delivery through nanocarriers could improve its therapeutic response against tuberculosis. The current study aimed at exploring the efficacy of glyceryl monostearate (GMS)-based solid-lipid nanoparticles (SLNs) and their mannose functionalized forms on the alveolar macrophage targeting ability of an anti-tubercular model drug, rifampicin (Rif). Rif-loaded SLNs were accomplished by the solvent diffusion method. These carriers with unimodal particle size distribution (~170 nm) were further surface-modified with mannose via Schiff-base reaction, leading to slight enhancement of particle diameter and a decline of drug loading capacity. The encapsulated Rif, which was molecularly dispersed within the matrices as indicated by their XRD patterns, was eluted in a sustained manner with an initial burst release effect. The uptake efficiency of mannose-modified SLNs was remarkably higher than that of corresponding native forms on murine macrophage Raw 264.7 cells and human lung adenocarcinoma A549 cells. Eventually, the mannose-modified SLNs showed a greater cytotoxicity on Raw 264.7 and A549 cells relative to their unmodified forms. Overall, our study demonstrated that mannose modification of SLNs had an influence on their uptake by alveolar macrophages, which could provide guidance for the future development of alveolar macrophage targeted nanoformulations.

Co-spray dried inhalable composite powders of ciprofloxacin and alginate oligosaccharide as anti-biofilm therapy.

The treatment of chronic respiratory infections caused by biofilm formation are extremely challenging owing to poor drug penetration into the complex biofilm structure and high drug resistance. Local delivery of an antibiotic together with a non-antibiotic adjuvant to the lungs could often enhance the therapeutic responses by targeting different bacterial growth pathways and minimizing drug resistance. In this study, we designed new inhalable dry powders containing ciprofloxacin (CIP) and OligoG (Oli, a low-molecular-weight alginate oligosaccharide impairing the mucoid biofilms by interacting with their cationic ions) to combat respiratory bacterial biofilm infections. The resulting powders were characterized with respect to their morphology, solid-state property, surface chemistry, moisture sorption behavior, and dissolution rate. The aerosol performance and storage stability of the dry powders were also evaluated. The results showed that inhalable dry powders composed of CIP and Oli could be readily accomplished via the wet milling and spray drying process. Upon the storage under 20 ± 2 °C/20 ± 2 % relative humidity (RH) for one month, there was no significant change in the in vitro aerosol performances of the dry powders. In contrast, the dry powders became non-inhalable following the storage at 20 ± 2 °C/53 ± 2 % RH for one month due to the hygroscopic nature of Oli, which could be largely prevented by incorporation of leucine. Collectively, this study suggests that the newly developed co-spray-dried powders composed of CIP and Oli might represent a promising and alternative treatment strategy against respiratory bacterial biofilm infections.

Sialic Acid Conjugate-Modified Cationic Liposomal Paclitaxel for Targeted Therapy of Lung Metastasis in Breast Cancer: What a Difference the Cation Content Makes.

Cationic lipids play a pivotal role in developing novel drug delivery systems for diverse biomedical applications, owing to the success of mRNA vaccines against COVID-19 and the Phase III antitumor agent EndoTAG-1. However, the therapeutic potential of these positively charged liposomes is limited by dose-dependent toxicity. While an increased content of cationic lipids in the formulation can enhance the uptake and cytotoxicity toward tumor-associated cells, it is crucial to balance these advantages with the associated toxic side effects. In this work, we synthesized the cationic lipid HC-Y-2 and incorporated it into sialic acid (SA)-modified cationic liposomes loaded with paclitaxel to target tumor-associated immune cells efficiently. The SA-modified cationic liposomes exhibited enhanced binding affinity toward both RAW264.7 cells and 4T1 tumor cells in vitro due to the increased ratios of cationic HC-Y-2 content while effectively inhibiting 4T1 cell lung metastasis in vivo. By leveraging electrostatic forces and ligand-receptor interactions, the SA-modified cationic liposomes specifically target malignant tumor-associated immune cells such as tumor-associated macrophages (TAMs), reduce the proportion of cationic lipids in the formulation, and achieve dual objectives: high cellular uptake and potent antitumor efficacy. These findings highlight the potential advantages of this innovative approach utilizing cationic liposomes.

Long-acting inhaled medicines: Present and future.

Inhaled medicines continue to be an essential part of treatment for respiratory diseases such as asthma, chronic obstructive pulmonary disease, and cystic fibrosis. In addition, inhalation technology, which is an active area of research and innovation to deliver medications via the lung to the bloodstream, offers potential advantages such as rapid onset of action, enhanced bioavailability, and reduced side effects for local treatments. Certain inhaled macromolecules and particles can also end up in different organs via lymphatic transport from the respiratory epithelium. While the majority of research on inhaled medicines is focused on the delivery technology, particle engineering, combination therapies, innovations in inhaler devices, and digital health technologies, researchers are also exploring new pharmaceutical technologies and strategies to prolong the duration of action of inhaled drugs. This is because, in contrast to most inhaled medicines that exert a rapid onset and short duration of action, long-acting inhaled medicines (LAIM) improve not only the patient compliance by reducing the dosing frequency, but also the effectiveness and convenience of inhaled therapies to better manage patients' conditions. This paper reviews the advances in LAIM, the pharmaceutical technologies and strategies for developing LAIM, and emerging new inhaled modalities that possess a long-acting nature and potential in the treatment and prevention of various diseases. The challenges in the development of the future LAIM are also discussed where active research and innovations are taking place.

Inhaled RNA drugs to treat lung diseases: Disease-related cells and nano-bio interactions.

In recent years, RNA-based therapies have gained much attention as biomedicines due to their remarkable therapeutic effects with high specificity and potency. Lung diseases offer a variety of currently undruggable but attractive targets that could potentially be treated with RNA drugs. Inhaled RNA drugs for the treatment of lung diseases, including asthma, chronic obstructive pulmonary disease, cystic fibrosis, and acute respiratory distress syndrome, have attracted more and more attention. A variety of novel nanoformulations have been designed and attempted for the delivery of RNA drugs to the lung via inhalation. However, the delivery of RNA drugs via inhalation poses several challenges. It includes protection of the stability of RNA molecules, overcoming biological barriers such as mucus and cell membrane to the delivery of RNA molecules to the targeted cytoplasm, escaping endosomal entrapment, and circumventing unwanted immune response etc. To address these challenges, ongoing researches focus on developing innovative nanoparticles to enhance the stability of RNA molecules, improve cellular targeting, enhance cellular uptake and endosomal escape to achieve precise delivery of RNA drugs to the intended lung cells while avoiding unwanted nano-bio interactions and off-target effects. The present review first addresses the pathologic hallmarks of different lung diseases, disease-related cell types in the lung, and promising therapeutic targets in these lung cells. Subsequently we highlight the importance of the nano-bio interactions in the lung that need to be addressed to realize disease-related cell-specific delivery of inhaled RNA drugs. This is followed by a review on the physical and chemical characteristics of inhaled nanoformulations that influence the nano-bio interactions with a focus on surface functionalization. Finally, the challenges in the development of inhaled nanomedicines and some key aspects that need to be considered in the development of future inhaled RNA drugs are discussed.

In Vitro and In Vivo Evaluation of Inhalable Ciprofloxacin Sustained Release Formulations.

Respiratory antibiotics delivery has been appreciated for its high local concentration at the infection sites. Certain formulation strategies are required to improve pulmonary drug exposure and to achieve effective antimicrobial activity, especially for highly permeable antibiotics. This study aimed to investigate lung exposure to various inhalable ciprofloxacin (CIP) formulations with different drug release rates in a rat model. Four formulations were prepared, i.e., CIP-loaded PLGA micro-particles (CHPM), CIP microcrystalline dry powder (CMDP), CIP nanocrystalline dry powder (CNDP), and CIP spray-dried powder (CHDP), which served as a reference. The physicochemical properties, drug dissolution rate, and aerosolization performance of these powders were characterized in vitro. Pharmacokinetic profiles were evaluated in rats. All formulations were suitable for inhalation (mass median aerodynamic diameter < 5 µm). CIP in CHPM and CHDP was amorphous, whereas the drug in CMDP and CNDP remained predominantly crystalline. CHDP exhibited the fastest drug release rate, while CMDP and CNDP exhibited much slower drug release. In addition, CMDP and CNDP exhibited significantly higher in vivo lung exposure to CIP compared with CHDP and CHPM. This study suggests that lung exposure to inhaled drugs with high permeability is governed by drug release rate, implying that lung exposure of inhaled antibiotics could be improved by a sustained-release formulation strategy.

[Development of mortality prediction model for critically ill patients based on multidimensional and dynamic clinical characteristics].

OBJECTIVE: To develop a mortality prediction model for critically ill patients based on multidimensional and dynamic clinical data collected by the hospital information system (HIS) using random forest algorithm, and to compare the prediction efficiency of the model with acute physiology and chronic health evaluation II (APACHE II) model. METHODS: The clinical data of 10 925 critically ill patients aged over 14 years old admitted to the Third Xiangya Hospital of Central South University from January 2014 to June 2020 were extracted from the HIS system, and APACHE II scores of the critically ill patients were extracted. Expected mortality of patients was calculated according to the death risk calculation formula of APACHE II scoring system. A total of 689 samples with APACHE II score records were used as the test set, and the other 10 236 samples were used to establish the random forest model, of which 10% (n = 1 024) were randomly selected as the validation set and 90% (n = 9 212) were selected as the training set. According to the time series of 3 days before the end of critical illness, the clinical characteristics of patients such as general information, vital signs data, biochemical test results and intravenous drug doses were selected to develope a random forest model for predicting the mortality of critically ill patients. Using the APACHE II model as a reference, receiver operator characteristic curve (ROC curve) was drawn, and the discrimination performance of the model was evaluated through the area under the ROC curve (AUROC). According to the precision and recall, Precision-Recall curve (PR curve) was drawn, and the calibration performance of the model was evaluated through the area under the PR curve (AUPRC). Calibration curve was drawn, and the consistency between the predicted event occurrence probability of the model and the actual occurrence probability was evaluated through the calibration index Brier score. RESULTS: Among the 10 925 patients, there were 7 797 males (71.4%) and 3 128 females (28.6%). The average age was (58.9±16.3) years old. The median length of hospital stay was 12 (7, 20) days. Most patients (n = 8 538, 78.2%) were admitted to intensive care unit (ICU), and the median length of ICU stay was 66 (13, 151) hours. The hospitalized mortality was 19.0% (2 077/10 925). Compared with the survival group (n = 8 848), the patients in the death group (n = 2 077) were older (years old: 60.1±16.5 vs. 58.5±16.4, P < 0.01), the ratio of ICU admission was higher [82.8% (1 719/2 077) vs. 77.1% (6 819/8 848), P < 0.01], and the proportion of patients with hypertension, diabetes and stroke history was also higher [44.7% (928/2 077) vs. 36.3% (3 212/8 848), 20.0% (415/2 077) vs. 16.9% (1 495/8 848), 15.5% (322/2 077) vs. 10.0% (885/8 848), all P < 0.01]. In the test set data, the prediction value of random forest model for the risk of death during hospitalization of critically ill patients was greater than that of APACHE II model, which showed by that the AUROC and AUPRC of random forest model were higher than those of APACHE II model [AUROC: 0.856 (95% confidence interval was 0.812-0.896) vs. 0.783 (95% confidence interval was 0.737-0.826), AUPRC: 0.650 (95% confidence interval was 0.604-0.762) vs. 0.524 (95% confidence interval was 0.439-0.609)], and Brier score was lower than that of APACHE II model [0.104 (95% confidence interval was 0.085-0.113) vs. 0.124 (95% confidence interval was 0.107-0.141)]. CONCLUSIONS: The random forest model based on multidimensional dynamic characteristics has great application value in predicting hospital mortality risk for critically ill patients, and it is superior to the traditional APACHE II scoring system.

20(R)-ginsenoside Rg3-loaded polyurethane/marine polysaccharide based nanofiber dressings improved burn wound healing potentials.

The management of deep burn injuries is extremely challenging, ascribed to their delayed wound healing rate, susceptibility for bacterial infections, pain, and increased risk of hypertrophic scarring. In our current investigation, a series of composite nanofiber dressings (NFDs) based on polyurethane (PU) and marine polysaccharides (i.e., hydroxypropyl trimethyl ammonium chloride chitosan, HACC and sodium alginate, SA) were accomplished by electrospinning and freeze-drying protocols. The 20(R)-ginsenoside Rg3 (Rg3) was further loaded into these NFDs to inhibit the formation of excessive wound scars. The PU/HACC/SA/Rg3 dressings showed a sandwich-like structure. The Rg3 was encapsulated in the middle layers of these NFDs and slowly released over 30 days. The PU/HACC/SA and PU/HACC/SA/Rg3 composite dressings demonstrated superior wound healing potentials over other NFDs. These dressings also displayed favorable cytocompatibility with keratinocytes and fibroblasts and could dramatically accelerate epidermal wound closure rate following 21 days of the treatment of a deep burn wound animal model. Interestingly, the PU/HACC/SA/Rg3 obviously reduced the excessive scar formation, with a collagen type I/III ratio closer to the normal skin. Overall, this study represented PU/HACC/SA/Rg3 as a promising multifunctional wound dressing, which promoted the regeneration of burn skins and attenuated scar formation.

Effect of an Herbal-Based Injection on 28-Day Mortality in Patients With Sepsis: The EXIT-SEP Randomized Clinical Trial.

Importance: Previous research has suggested that Xuebijing injection (XBJ), an herbal-based intravenous preparation, may reduce mortality among patients with sepsis. Objective: To determine the effect of XBJ vs placebo on 28-day mortality among patients with sepsis. Design, Setting, and Participants: The Efficacy of Xuebijing Injection in Patients With Sepsis (EXIT-SEP) trial was a multicenter, randomized double-blind, placebo-controlled trial conducted in intensive care units at 45 sites and included 1817 randomized patients with sepsis (sepsis 3.0) present for less than 48 hours. Patients aged 18 to 75 years with a Sequential Organ Failure Assessment score of 2 to 13 were enrolled. The study was conducted from October 2017 to June 2019. The final date of follow-up was July 26, 2019. Data analysis was performed from January 2020 to August 2022. Interventions: The patients were randomized to receive either intravenous infusion of XBJ (100 mL, n = 911) or volume-matched saline placebo (n = 906) every 12 hours for 5 days. Main Outcomes and Measures: The primary outcome was 28-day mortality. Results: Among the 1817 patients who were randomized (mean [SD] age, 56.5 [13.5] years; 1199 [66.0%] men), 1760 (96.9%) completed the trial. In these patients, the 28-day mortality rate was significantly different between the placebo group and the XBJ group (230 of 882 patients [26.1%] vs 165 of 878 patients [18.8%], respectively; P < .001). The absolute risk difference was 7.3 (95% CI, 3.4-11.2) percentage points. The incidence of adverse events was 222 of 878 patients (25.3%) in the placebo group and 200 of 872 patients (22.9%) in the XBJ group. Conclusions and Relevance: In this randomized clinical trial among patients with sepsis, the administration of XBJ reduced 28-day mortality compared with placebo. Trial Registration: ClinicalTrials.gov Identifier: NCT03238742.

Recent advances in pH/enzyme-responsive polysaccharide-small-molecule drug conjugates as nanotherapeutics.

Now-a-days, the polysaccharides are extensively employed for the delivery of small-molecule drugs ascribed to their excellent biocompatibility, biodegradability and modifiability. An array of drug molecules is often chemically conjugated with different polysaccharides to augment their bio-performances. As compared to their therapeutic precursors, these conjugates could typically demonstrate an improved intrinsic solubility, stability, bioavailability and pharmacokinetic profiles of the drugs. In current years, various stimuli-responsive particularly pH and enzyme-sensitive linkers or pendants are also exploited to integrate the drug molecules into the polysaccharide backbone. The resulting conjugates could experience a rapid molecular conformational change upon exposure to the microenvironmental pH and enzyme changes of the diseased states, triggering the release of the bioactive cargos at the targeted sites and eventually minimize the systemic side effects. Herein, the recent advances in pH and enzyme -responsive polysaccharide-drug conjugates and their therapeutic benefits are systematically reviewed, following a brief description on the conjugation chemistry of the polysaccharides and drug molecules. The challenges and future perspectives of these conjugates are also precisely discussed.

Drug Combination of Ciprofloxacin and Polymyxin B for the Treatment of Multidrug-Resistant Acinetobacter baumannii Infections: A Drug Pair Limiting the Development of Resistance.

Polymyxins are considered as last-resort antibiotics to treat infections caused by Acinetobacter baumannii. However, there are increasing reports of resistance in A. baumannii to polymyxins. In this study, inhalable combinational dry powders consisting of ciprofloxacin (CIP) and polymyxin B (PMB) were prepared by spray-drying. The obtained powders were characterized with respect to the particle properties, solid state, in vitro dissolution and in vitro aerosol performance. The antibacterial effect of the combination dry powders against multidrug-resistant A. baumannii was assessed in a time-kill study. Mutants from the time-kill study were further investigated by population analysis profiling, minimum inhibitory concentration testing, and genomic comparisons. Inhalable dry powders consisting of CIP, PMB and their combination showed a fine particle fraction above 30%, an index of robust aerosol performance of inhaled dry powder formulations in the literature. The combination of CIP and PMB exhibited a synergistic antibacterial effect against A. baumannii and suppressed the development of CIP and PMB resistance. Genome analyses revealed only a few genetic differences of 3-6 SNPs between mutants and the progenitor isolate. This study suggests that inhalable spray-dried powders composed of the combination of CIP and PMB is promising for the treatment of respiratory infections caused by A. baumannii, and this combination can enhance the killing efficiency and suppress the development of drug resistance.

Role of dispersion enhancer selection in the development of novel tratinterol hydrochloride dry powder inhalation formulations.

Tratinterol hydrochloride (TH) is a new long-acting bronchodilator with strong ß2 adrenoceptor stimulation activity. The aim of this study was to design a new carrier-based dry powder inhalation (DPI) formulation for TH and to investigate the effect of dispersion enhancers on the aerosol performance of TH in vitro. To this end, coarse lactose was used as a carrier. TH was micronized by using a jet mill and blended with the carrier to obtain a reference DPI formulation. Commercial magnesium stearate (MgSt) as received, micronized MgSt (MgSt-M), and fine lactose (FL) were used as the dispersion enhancers and formulated with the micronized TH (TH-M) and the carrier as DPI formulations. The obtained DPI formulations were characterized using dynamic light scattering (DLS), X-ray powder diffraction (XRPD), thermal analysis, powder rheometer, and Raman microscopy. A next generation pharmaceutical impactor (NGI) was used to evaluate the aerodynamic performance of the dry powders. The results showed that TH-M was in an inhalable particle size range, and based on the XRPD and thermal analysis, the solid form of TH-M did not change compared to the starting materials. The NGI results showed that the fine particle fraction (FPF) of TH could be increased with the addition of MgSt and FL as dispersion enhancers in the reference formulation. In addition, the FPF of TH could be increased with a decrease in the particle size of MgSt or an increase in the amount of FL. A combination of MgSt-M and FL could further improve the aerosol performance of TH. Raman spectroscopic imaging confirmed the spatial location of MgSt and TH at the surface of the carrier. This study demonstrates that TH could be formulated into carrier-based dry powder formulation for inhalation using coarse lactose as the carrier. The dual strategy based on using both MgSt and FL as dispersion enhancers improved the aerosol performance of a novel TH dry powder formulation.

Chiral Nanosilica Drug Delivery Systems Stereoselectively Interacted with the Intestinal Mucosa to Improve the Oral Adsorption of Insoluble Drugs.

Chiral nanoparticles (NPs) with nanoscale rough surfaces have enormous application prospects in drug delivery. However, the stereoselective interactions between the chiral NPs and biosurfaces remain challenging and mysterious. Herein, we designed mesoporous silica nanocarriers (l/d/dl-TA-PEI@CMSN) exhibiting the same structural parameters (hydrophilic, electroneutral, spherical NPs, ∼120 nm) but different geometrical chirality as oral nanodrug delivery systems (Nano-DDS) for insoluble drugs nimesulide (NMS) and ibuprofen (IBU) and demonstrated their stereoselective interactions with the intestinal mucosa, that is, l-TA-PEI@CMSN as well as Nano-DDS in the l-configuration displayed apparent superior behaviors in multiple microprocesses associated with oral adsorption, including adhesion, penetration, adsorption, retention and uptake, causing by the stereomatching between the chiral mesostructures of NPs and the inherent chiral topologies of the biosurfaces. As hosting systems, l/d/dl-TA-PEI@CMSN effectively incorporated drugs in amorphous states and helped to overcome the stability, solubility and permeability bottlenecks of drugs. Subsequently, Nano-DDS in the l-configuration (including IBU/l-TA-PEI@CMSN and NMS/d-TA-PEI@CMSN owing to a chiral inversion) showed higher oral delivery efficiency of NMS and IBU evidenced by the larger relative bioavailability (1055.06% and 583.17%, respectively) and stronger anti-inflammatory and analgesic effects. In addition, l/d/dl-TA-PEI@CMSN were stable, nonirritative, biocompatible and biodegradable, benefiting for their clinical applications. These findings provided insights into the rational design of functionalized Nano-DDS and contributed to the further knowledge in the field of chiral pharmaceutical science.

Engineering Transferrin-Decorated Pullulan-Based Prodrug Nanoparticles for Redox Responsive Paclitaxel Delivery to Metastatic Lung Cancer Cells.

Paclitaxel (PTX) remains a cornerstone in the treatment of locally advanced and metastatic lung cancer. To improve its therapeutic indices against lung cancer, novel redox-sensitive pullulan/PTX-based prodrug NPs (PULL-SS-PTX NPs) were accomplished, which were further surface-decorated with transferrin (TF), a cancer cell-targeting ligand, to afford TF-PULL-SS-PTX NPs. These prodrug NPs (drug content, >37% and average size, 134-163 nm) rapidly dismantled their self-assembled architecture upon exposure to simulated reducing conditions, causing a triggered drug release as compared to the control scaffold (PULL-CC-PTX NPs). These scaffolds also evidenced outstanding colloidal stability, cellular uptake efficiency, and discriminating cytotoxicity between the cancer and healthy cells. Intravenously delivered redox-sensitive NPs exhibited improved tumor-suppressing properties as compared to the control nanovesicles (PULL-CC-PTX NPs) in a B16-F10 melanoma lung metastasis mice model. The targeting efficiency and associated augmented anticancer potentials of TF-PULL-SS-PTX NPs relative to TF-free redox-responsive NPs and Taxol intravenous injection were also established on the transferrin receptor (TFR) overexpressed Lewis lung carcinoma (LLC-luc) cell-bearing mice model. Moreover, the TF-functionalized scaffold displayed a reduced systemic toxicity compared to that of Taxol intravenous injection. Overall, the proposed TF-decorated prodrug NPs could be a promising nanomedicine for intracellular PTX delivery against metastatic lung cancer.

Donepezil accelerates the release of PLGA microparticles via catalyzing the polymer degradation regardless of the end groups and molecular weights.

Poly (lactic-co-glycolic acid) (PLGA) is one of the most successful polymers for sustained parenteral drug products in the market. However, rational selection of PLGA in the formulations is still challenging due to the lack of fundamental studies. The present study aimed to investigate the influence of donepezil (DP) on the in-vitro and in-vivo performance of PLGA sustained microspheres. Three kinds of PLGAs with different end groups and molecular weights were selected. Then DP-loaded PLGA microspheres (DP-MSs) with similar particle size, drug loading, and encapsulation efficiency were prepared using an o/w emulsion-solvent evaporation method. Laser diffraction and scanning electron microscopy showed that the prepared DP-MSs were about 35 µm and spherical in shape. Differential scanning calorimetry and X-ray diffraction indicated that DP was in an amorphous state inside the microspheres. Unexpectedly, the molecular weight and end group of PLGAs did not significantly influence the in-vitro and in-vivo performance of the DP-MSs. The gel permeation chromatography indicated that the degradation rates of PLGAs were accelerated with the incorporation of DP into the microspheres, and the molecular weight of all three kinds of PLGAs sharply dropped to about 11,000 Da within the initial three days. The basic catalysis effect induced by DP might be responsible for the accelerated degradation of PLGAs, which led to similar in-vitro release profiles of DP from different PLGA matrices. A point-to-point level A correlation between the in-vitro release and the in-vivo absorption was observed, which confirmed the accelerated release of DP from the DP-MSs in-vivo. The results indicated that the influence of DP on the degradation of PLGA should be considered when developing DP-sustained microspheres.

Unleashing the healing potential: Exploring next-generation regenerative protein nanoscaffolds for burn wound recovery.

Burn injury is a serious public health problem and scientists are continuously aiming to develop promising biomimetic dressings for effective burn wound management. In this study, a greater efficacy in burn wound healing and the associated mechanisms of α-lactalbumin (ALA) based electrospun nanofibrous scaffolds (ENs) as compared to other regenerative protein scaffolds were established. Bovine serum albumin (BSA), collagen type I (COL), lysozyme (LZM) and ALA were separately blended with poly(ε-caprolactone) (PCL) to fabricate four different composite ENs (LZM/PCL, BSA/PCL, COL/PCL and ALA/PCL ENs). The hydrophilic composite scaffolds exhibited an enhanced wettability and variable mechanical properties. The ALA/PCL ENs demonstrated higher levels of fibroblast proliferation and adhesion than the other composite ENs. As compared to PCL ENs and other composite scaffolds, the ALA/PCL ENs also promoted a better maturity of the regenerative skin tissues and showed a comparable wound healing effect to Collagen spongeⓇ on third-degree burn model. The enhanced wound healing activity of ALA/PCL ENs compared to other ENs could be attributed to their ability to promote serotonin production at wound sites. Collectively, this investigation demonstrated that ALA is a unique protein with a greater potential for burn wound healing as compared to other regenerative proteins when loaded in the nanofibrous scaffolds.

Airway epithelial cell-specific delivery of lipid nanoparticles loading siRNA for asthma treatment.

With specific and inherent mRNA cleaving activity, small interfering RNA (siRNA) has been deemed promising therapeutics to reduce the exacerbation rate of asthma by inhibiting the expression and release of proinflammatory cytokines from airway epithelial cells (AECs). To exert the therapeutic effects of siRNA drugs, nano-formulations with high efficiency and safety are required to deliver these nucleic acids to the target cells. Herein, we exploited novel inhaled lipid nanoparticles (LNPs) targeting intercellular adhesion molecule-1 (ICAM-1) receptors on the apical side of AECs. This delivery system is meant to enhance the specific delivery efficiency of siRNA in AECs to prevent the expression of proinflammatory cytokines in AECs and the concomitant symptoms in parallel. A cyclic peptide that resembles part of the capsid protein of rhinovirus and binds to ICAM-1 receptors was initially conjugated with cholesterol and subsequently assembled with ionizable cationic lipids to form the LNPs (Pep-LNPs) loaded with siRNA against thymic stromal lymphopoietin (TSLP siRNA). The obtained Pep-LNPs were subjected to thorough characterization and evaluations in vitro and in vivo. Pep-LNPs significantly enhanced cellular uptake and gene silencing efficiency in human epithelial cells expressing ICAM-1 in vitro, exhibited AEC-specific delivery and improved the gene silencing effect in ovalbumin-challenged asthmatic mice after pulmonary administration. More importantly, Pep-LNPs remarkably downregulated the expression of TSLP in AECs, effectively alleviated inflammatory cell infiltration, and reduced the secretion of other proinflammatory cytokines, including IL-4 and IL-13, as well as mucus production in asthmatic mice. This study demonstrates that Pep-LNPs are safe and efficient to deliver siRNA drugs to asthmatic AECs and could potentially alleviate allergic asthma by inhibiting the overexpression of proinflammatory cytokines in the airway.