ABSTRACT
The electrochemical regeneration of reduced nicotinamide adenine dinucleotide (NADH) using [Rh(Cp*)(bpy)Cl]+ holds significant promise for the industrial synthesis of chiral chemicals. However, challenges persist due to the high consumption of NADH and the limited efficiency of its cyclic regeneration, which currently hinder widespread application. To address these obstacles, based on in-situ growth of 3D ordered metal-organic framework (NU-1000) on the surface of graphite felt, [Rh(Cp*)(bpy)Cl]+ were immobilized on the Zr6 nodes of NU-1000 by solvent-assisted ligand incorporation (SALI), and applied in a flow bioreactor. Moreover, we employ a gas diffusion electrode (GDE) to oxidize H2, providing a clean proton source for the electrochemical regeneration of NADH. Consequently, highly efficient enzymatic electrocatalytic synthesis of L-lactate was achieved when coupled with L-lactate dehydrogenases (LDH) as a model reaction, and the total turnover number (TTN) reached 19600 and 1750 for [Rh(Cp*)(bpy)Cl]+ and NAD+ after 48 h, corresponding to a high turnover frequency (TOF) of 2350 h-1 and 210 h-1 for [Rh(Cp*)(bpy)Cl]+ and NAD+, respectively. This work provides new insights for the construction of efficient enzymatic electrosynthesis systems in industrial production.
ABSTRACT
An antifouling peptide hydrogel-based electrochemical biosensor was developed for real-time monitoring of hydrogen peroxide (H2O2) and nitric oxide (NO) released by 3D cultured breast cancer cells upon drug stimulation. Platinum nanoparticles (Pt NPs) were electrodeposited on titanium mesh (Pt NPs/TM) to enhance sensitivity and shown to possess excellent electrocatalytic ability toward H2O2 and NO. The composite hydrogel formed by co-assembling of N-fluorenylmethoxycarbonyl diphenylalanine (Fmoc-FF) and a fluorine methoxycarbonyl group-functionalized Lys-(Fmoc)-Asp was coated on Pt NPs/TM electrode surface to provide cellular scaffolding. Their favorable biocompatibility promoted cell adhesion and growth, while good hydrophilicity endowed the sensor with greatly enhanced antifouling capability in complex cell culture environments. The biosensor successfully determined H2O2 and NO secretion from both non-metastatic and metastatic breast cancer cells in real time. Our results demonstrated robust associations between reactive oxygen species (ROS) and reactive nitrogen species (RNS) production and cell malignancy, with the main difference in oxidative stress between the two subtypes of cells being NO release, particularly emphasizing RNS's critical leading in driving cancer metastasis and invasion progression. This sensor holds great potential for cell-release research under the in vivo-like microenvironment and could reveal RNS as an attractive therapeutic target for treating breast cancer.
Subject(s)
Biosensing Techniques , Breast Neoplasms , Electrochemical Techniques , Hydrogels , Hydrogen Peroxide , Nitric Oxide , Platinum , Humans , Biosensing Techniques/methods , Hydrogen Peroxide/chemistry , Hydrogels/chemistry , Breast Neoplasms/pathology , Nitric Oxide/metabolism , Nitric Oxide/analysis , Electrochemical Techniques/methods , Electrochemical Techniques/instrumentation , Platinum/chemistry , Metal Nanoparticles/chemistry , Female , Peptides/chemistry , Peptides/pharmacology , Cell Line, Tumor , Titanium/chemistry , MCF-7 Cells , Cell Culture Techniques, Three Dimensional/methodsABSTRACT
Breast cancer is a malignant tumor, with various subtypes showing different behaviors. Endogenous H2O2 is an important marker of tumor progression, which makes it important to study the relationship between breast cancer subtypes and H2O2 for pathogenesis and treatment strategies, but this has rarely been reported so far. In this work, we constructed a three-dimensional (3D) electrochemiluminescence (ECL) sensing platform for the detection of H2O2 released from two typical subtypes of breast cancer cells (MCF-7 cells for luminal A-type and MDA-MB-231 cells for three negative breast cancers, TNBCs). To adequately replicate the tumor microenvironment, the peptide hydrogel was introduced as a scaffold for 3D cell culture. The titanium foam (TF) was used as a 3D electrode to better match the 3D culture substrate. N-(4-Aminobutyl)-N-ethylisoluminol (ABEI) was selected as the ECL emitter and assembled into the peptide hydrogel by hydrogen bonding and π-stacking, which resulted in a stable and homogeneous distribution of ABEI along the hydrogel fibers. Furthermore, basic amino acids were introduced to provide alkaline microenvironment for ABEI. Therefore, ABEI exhibited high ECL efficiency, resulting in a high sensitivity with an ultralow detection limit of 0.023 nM (S/N = 3) for H2O2 of the proposed ECL biosensor. MCF-7 and MDA-MB-231 cells were cultured in a 3D peptide hydrogel/ABEI/TF electrode, respectively, and endogenous H2O2 was successfully monitored. A notably significant difference of H2O2 released between MDA-MB-231 cells and MCF-7 cells without stimulation but similar extra release with stimulation were observed. These findings may help understand the physiological mechanisms behind the various subtypes and reactive oxygen species (ROS)-related treatment for breast cancer.
Subject(s)
Breast Neoplasms , Electrochemical Techniques , Hydrogels , Hydrogen Peroxide , Peptides , Humans , Hydrogen Peroxide/analysis , Hydrogen Peroxide/chemistry , Breast Neoplasms/pathology , Breast Neoplasms/metabolism , Peptides/chemistry , Hydrogels/chemistry , Luminescent Measurements , Female , Cell Line, Tumor , MCF-7 Cells , Biosensing TechniquesABSTRACT
This study investigates the utilization of choline hydroxide as a cocatalyst in the Stöber method to synthesize silica particles with controlled microstructure. Under low ammonia concentration, we add a robust organic base choline hydroxide and systematically explore the influence of choline hydroxide concentration on the hydrolysis and condensation equilibrium of tetraethyl orthosilicate (TEOS). Through the rational control of the water content, we significantly enhance both the size range and polydispersity of the resulting silica particles. Taking advantage of the regulated microstructure induced by controlled hydrolysis and condensation catalyzed by choline hydroxide, we achieved silica particles with hollow structures through hot water etching, exhibiting significantly enhanced surface area. These findings demonstrate the versatility of choline hydroxide as a cocatalyst in tailoring the microstructure of silica particles. In addition, due to its reducing ability and biocompatibility, which are not shared by other reported catalysts, the use of choline hydroxide opens up opportunities for applications in catalysis, sensing, and drug delivery.
ABSTRACT
Scintillators have garnered heightened attention for their diverse applications in medical imaging and security inspection. Nonetheless, commercial scintillators encounter challenges with costly rare-earth metals and toxic elements like thallium (Tl), driving the need for sustainable, cost-effective, and eco-friendly alternatives to meet contemporary X-ray detection demands. This study focuses on exploring the potential of Cu+-doped Rb2AgI3 as an effective metal halide (MH) scintillator. One-dimensional (1D) Rb2AgI3 and Cu+-doped Rb2AgI3 single crystals (SCs) were synthesized by using the conventional temperature-lowering crystallization method. When excited by UV light, Cu+-doped SCs emitted a broad sky-blue light at 490 nm with a high photoluminescence (PL) quantum yield (PLQY) of 76.48%. Remarkably, under X-ray excitation, these Cu+-doped SCs demonstrated an outstanding light yield of 36,293 photons MeV-1, a relatively low detection threshold of 1.022 µGyair s-1, and a rapid scintillation decay time of 465 ns. The prepared translucent scintillation film has good uniformity and flexibility, with a high spatial resolution of 10.2 lp mm-1. These results position Cu+-doped Rb2AgI3 as a leading candidate among promising X-ray scintillators, offering superior scintillation light yield, excellent stability, and nontoxicity.
ABSTRACT
Silica particles modified with amino groups hold immense potential across diverse fields, owing to their distinctive properties. The widely adopted method of surface modification, utilizing (3-aminopropyl)triethoxysilane (APTES), facilitates the incorporation of amino-functional groups onto the silica surface, thereby creating sites for subsequent functionalization with other molecules. In this context, the ability to precisely tailor the surface properties of amino-functionalized silica particles is crucial for optimizing their performance in various applications. In this work, we systematically investigated the influence of the APTES concentration and water content on the density of amino groups grafted on the silica surface within an ethanol-water mixture. The rational control of hydrolysis and condensation of APTES enabled the precise regulation of the amino density on the silica surface, resulting in a notable shift in the isoelectric point from 2.9 to 9.2. Subsequently, we assembled amino-functionalized silica with different isoelectric points with gold nanoparticles to demonstrate their tunable ability as surface-enhanced Raman scattering (SERS) substrates. This controlled and tailored amino-functionalization process opens up new routes for fine-tuning the properties of silica particles, thereby expanding their utility across various applications in materials science, nanotechnology, and biomedicine.
ABSTRACT
The sol-gel chemistry of silica has long been used for manipulating the size, shape, and microstructure of mesoporous silica particles. This manipulation is performed in mild conditions through controlling the hydrolysis and condensation of silicon alkoxide. Compared to amorphous silica particles, the preparation of mesoporous silica, such as MCM-41, using the sol-gel approach offers several unique advantages in the fields of catalysis, medicament, and environment, due to its ordered mesoporous structure, high specific surface area, large pore volume, and easily functionalized surface. In this review, our primary focus is on the latest research related to the manipulation of mesoporous silica architectures using the sol-gel approach. We summarize various structures, including hollow, yolk-shell, multi-shelled hollow, Janus, nanotubular, and 2D membrane structures. Additionally, we survey sol-gel strategies involving the introduction of various functional elements onto the surface of mesoporous silica to enhance its performance. Furthermore, we outline the prospects and challenges associated with mesoporous silica featuring different structures and functions in promising applications, such as high-performance catalysis, biomedicine, wastewater treatment, and CO2 capture.
ABSTRACT
High-energy-density lithium-metal batteries (LMBs) coupling lithium-metal anodes and high-voltage cathodes are hindered by unstable electrode/electrolyte interphases (EEIs), which calls for the rational design of efficient additives. Herein, we analyze the effect of electron structure on the coordination ability and energy levels of the additive, from the aspects of intramolecular electron cloud density and electron delocalization, to reveal its mechanism on solvation structure, redox stability, as-formed EEI chemistry, and electrochemical performances. Furthermore, we propose an electron reconfiguration strategy for molecular engineering of additives, by taking sorbide nitrate (SN) additive as an example. The lone pair electron-rich group enables strong interaction with the Li ion to regulate solvation structure, and intramolecular electron delocalization yields further positive synergistic effects. The strong electron-withdrawing nitrate moiety decreases the electron cloud density of the ether-based backbone, improving the overall oxidation stability and cathode compatibility, anchoring it as a reliable cathode/electrolyte interface (CEI) framework for cathode integrity. In turn, the electron-donating bicyclic-ring-ether backbone breaks the inherent resonance structure of nitrate, facilitating its reducibility to form a N-contained and inorganic Li2O-rich solid electrolyte interface (SEI) for uniform Li deposition. Optimized physicochemical properties and interfacial biaffinity enable significantly improved electrochemical performance. High rate (10 C), low temperature (-25 °C), and long-term stability (2700 h) are achieved, and a 4.5 Ah level Li||NCM811 multilayer pouch cell under harsh conditions is realized with high energy density (462 W h/kg). The proof of concept of this work highlights that the rational ingenious molecular design based on electron structure regulation represents an energetic strategy to modulate the electrolyte and interphase stability, providing a realistic reference for electrolyte innovations and practical LMBs.
ABSTRACT
The application of thermally activated delay fluorescence (TADF) emitters in the orange-red regime usually suffers from the fast non-radiative decay of emissive singlet states (kSNR), leading to low emitting efficiency in corresponding organic light-emitting diode (OLED) devices. Although kSNR has been quantitatively described by energy gap law, how ultrafast molecular motions are associated with the kSNR of TADF emitters remains largely unknown, which limits the development of new strategies for improving the emitting efficiency of corresponding OLED devices. In this work, we employed two commercial TADF emitters (TDBA-Ac and PzTDBA) as a model system and attempted to clarify the relationship between ultrafast excited-state structural relaxation (ES-SR) and kSNR. Spectroscopic and theoretical investigations indicated that S1/S0 ES-SR is directly associated with promoting vibrational modes, which are considerably involved in electronic-vibrational coupling through the Huang-Rhys factor, while kSNR is largely affected by the reorganization energy of the promoting modes. By restraining S1/S0 ES-SR in doping films, the kSNR of TADF emitters can be greatly reduced, resulting in high emitting efficiency. Therefore, by establishing the connection among S1/S0 ES-SR, promoting modes and kSNR of TADF emitters, our work clarified the key role of external structural restraint for achieving high emitting efficiency in TADF-based OLED devices.
ABSTRACT
Epithelial-mesenchymal transition (EMT) promotes tumor cell infiltration and metastasis. Tracking the progression of EMT could potentially indicate early cancer metastasis. A key characteristic of EMT is the dynamic alteration in the molecular levels of E-cadherin and N-cadherin. Traditional assays have limited sensitivity and multiplexing capabilities, relying heavily on cell lysis. Here, we developed a multiplex electrochemical biosensor to concurrently track the upregulation of N-cadherin expression and reduction of E-cadherin in breast cancer cells undergoing EMT. Small-sized gold nanoparticles (Au NPs) tagged with redox probes (thionin or amino ferrocene) and bound to two types of antibodies were used as distinguishable signal tags. These tags specifically recognized E-cadherin and N-cadherin proteins on the tumor cell surface without cross-reactivity. The diphenylalanine dipeptide (FF)/chitosan (CS)/Au NPs (FF-CS@Au) composites with high surface area and good biocompatibility were used as the sensing platforms for efficiently fixing cells and recording the dynamic changes in electrochemical signals of surface proteins. The electrochemical immunosensor allowed for simultaneous monitoring of E- and N-cadherins on breast cancer cell surfaces in a single run, enabling tracking of the EMT dynamic process for up to 60 h. Furthermore, the electrochemical detection results are consistent with Western blot analysis, confirming the reliability of the methodology. This present work provides an effective, rapid, and low-cost approach for tracking the EMT process, as well as valuable insights into early tumor metastasis.
Subject(s)
Biosensing Techniques , Breast Neoplasms , Electrochemical Techniques , Epithelial-Mesenchymal Transition , Gold , Metal Nanoparticles , Humans , Biosensing Techniques/methods , Breast Neoplasms/pathology , Gold/chemistry , Female , Metal Nanoparticles/chemistry , Electrochemical Techniques/methods , Cadherins , Cell Line, Tumor , Immunoassay/methods , Chitosan/chemistryABSTRACT
Förster resonance energy transfer (FRET) has been widely applied in fluorescence imaging, sensing and so on, while developing useful strategy of boosting FRET efficiency becomes a key issue that limits the application. Except optimizing spectral properties, promoting orientation factor (κ2) has been well discussed but rarely utilized for boosting FRET. Herein, we constructed binary nano-assembling of two thermally activated delayed fluorescence (TADF) emitters (2CzPN and DMAC-DPS) with J-type aggregate of cyanine dye (C8S4) as doping films by taking advantage of their electrostatic interactions. Time-resolved spectroscopic measurements indicated that 2CzPN/Cy-J films exhibit an order of magnitude higher kFRET than DMAC-DPS/Cy-J films. Further quantitative analysing on kFRET and kDET indicated higher orientation factor (κ2) in 2CzPN/Cy-J films play a key role for achieving fast kFRET, which was subsequently confirmed by anisotropic measurements. Corresponding DFT/TDDFT calculation revealed strong "two-point" electrostatic anchoring in 2CzPN/Cy-J films that is responsible for highly orientated transitions. We provide a new strategy for boosting FRET in nano-assemblies, which might be inspired for designing FRET-based devices of sensing, imaging and information encryption.
ABSTRACT
The oligomers of carbon suboxide, known as red carbon, exhibit a highly conjugated structure and semiconducting properties. Upon mild heat treatment, it transforms into a carbonaceous framework rich in oxygen surface terminations, called oxocarbon. In this study, the abundant oxygen functionalities are harnessed as anchors to create oxocarbon-supported nanohybrid electrocatalysts. Starting with single atomic Cu (II) strongly coordinated to oxygen atoms on red carbon, the Fehling reaction leads to the formation of Cu2O clusters. Simultaneously, a covalent oxocarbon framework emerges via cross-linking, providing robust support for Cu2O clusters. Notably, the oxocarbon support effectively stabilizes Cu2O clusters of very small size, ensuring their high durability in acidic conditions and the presence of ammonia. The synthesized material exhibits a superior electrocatalytic activity for nitrate reduction under acidic electrolyte conditions, with a high yield rate of ammonium (NH4 +) at 3.31 mmol h-1 mgcat -1 and a Faradaic efficiency of 92.5% at a potential of -0.4 V (vs RHE).
ABSTRACT
In this study, a novel fluorescent chemosensor 1 based on chromone-3-carboxaldehyde Schiff base was synthesized and featured through nuclear magnetic resonance (NMR) and mass spectra. Spectroscopic investigation indicated that the fluorescent sensor showed high selectivity toward Zn2+ over other metal ions and that the detection limit of 1 could reach 10-7 M. These indicated that 1 acted as a highly selective and sensitive fluorescence chemosensor for Zn2+ .
Subject(s)
Fluorescent Dyes , Schiff Bases , Spectrometry, Fluorescence/methods , Fluorescent Dyes/chemistry , Schiff Bases/chemistry , Chromones , ZincABSTRACT
The pharmacological activity of oxcarbazepine (OXC) is primarily exerted through its active 10-monohydroxy metabolite (MHD). Nonetheless, there is limited pharmacokinetic information available regarding paediatric patients with epilepsy treated with OXC, especially in infants and toddlers. Concurrently, this drug exhibits substantial variability in pharmacokinetics and therapeutic response across different individuals. We aimed to develop a model to quantitatively investigate factors that affect MHD pharmacokinetics to formulate a dosage guideline for OXC in Chinese paediatric patients. A total of 297 MHD trough concentrations were obtained from 287 epileptic children. Six body weight (BW)-based allometric models were used for population pharmacokinetic modelling, while investigating the impact of other covariates on the apparent clearance. The one-compartment model and age cut-off model for the apparent clearance (CL/F) were established to describe the pharmacokinetics of MHD. The probability to obtain target trough concentration ranges (TTCRs) of MHD between 3 and 35 mg/L was determined by Monte Carlo simulations for doses ranging from 8 to 90 mg/kg/day. A new dose optimization strategy combining the dosage guidelines and Bayesian method provides a tailored approach for Chinese paediatric epileptic patients based on their individual BW and desired TTCRs of MHD, and also supports current dose recommendations, with the exception of children weighing ≤5 kg.
Subject(s)
Anticonvulsants , Epilepsy , Infant , Humans , Child , Oxcarbazepine , Anticonvulsants/therapeutic use , Carbamazepine/therapeutic use , Bayes Theorem , Models, Biological , Epilepsy/drug therapy , Body Weight , ChinaABSTRACT
In this study, we present a novel modified Stöber method utilizing cetyltrimethylammonium bromide (CTAB) as a mediator for the preparation of monodispersed, micron-sized supermicroporous silica particles. Observed results show prepared silica particles ranging in size from 0.64 to 1.36 µm with an increase in CTAB concentration from 1.0 to 5.0 mM. The particles exhibited low polydispersity (<5%), a high Brunauer-Emmett-Teller surface area (570 to 1064 m2/g), and pore volumes ranging from 0.22 to 0.39 cm3/g. The pore size, determined using the Barrett-Joyner-Halenda method from the adsorption branches of the isotherms, was approximately 1.9 nm, specifically 1.83, 1.85, and 1.90 nm, as the CTAB concentration increased from 1.0 to 2.5 and 5.0 mM, respectively. The resulting particles displayed a narrow distribution of pore diameters. In addition, to obtain an in-depth understanding of the role of CTAB on the preparation of silica particles, a possible mechanism is also investigated using conductivity, dynamic light scattering (DLS), zeta potential, FT-IR spectra, and transmission electron microscopy. Our findings demonstrate that CTAB plays multiple roles in the hydrolysis/condensation of TEOS (tetraethyl orthosilicate) and subsequent nucleation and growth of silica particles. CTAB acts as a template for superporosity, a stabilizer for colloids, and an accelerator for nucleation and growth, leading to formation of monodispersed micrometer silica particles. Further characterization through FT-IR and 29Si solid NMR spectra revealed that the micron silica particles were obtained with inhomogeneity in the condensation degree, allowing for selective etching through hot incubation to form micron-sized hollow silica spheres.
ABSTRACT
Mutations in the gene encoding Cu-Zn superoxide dismutase 1 (SOD1) cause a subset of familial amyotrophic lateral sclerosis (fALS) cases. A shared effect of these mutations is that SOD1, which is normally a stable dimer, dissociates into toxic monomers that seed toxic aggregates. Considerable research effort has been devoted to developing compounds that stabilize the dimer of fALS SOD1 variants, but unfortunately, this has not yet resulted in a treatment. We hypothesized that cyclic thiosulfinate cross-linkers, which selectively target a rare, 2 cysteine-containing motif, can stabilize fALS-causing SOD1 variants in vivo. We created a library of chemically diverse cyclic thiosulfinates and determined structure-cross-linking-activity relationships. A pre-lead compound, "S-XL6," was selected based upon its cross-linking rate and drug-like properties. Co-crystallographic structure clearly establishes the binding of S-XL6 at Cys 111 bridging the monomers and stabilizing the SOD1 dimer. Biophysical studies reveal that the degree of stabilization afforded by S-XL6 (up to 24°C) is unprecedented for fALS, and to our knowledge, for any protein target of any kinetic stabilizer. Gene silencing and protein degrading therapeutic approaches require careful dose titration to balance the benefit of diminished fALS SOD1 expression with the toxic loss-of-enzymatic function. We show that S-XL6 does not share this liability because it rescues the activity of fALS SOD1 variants. No pharmacological agent has been proven to bind to SOD1 in vivo. Here, using a fALS mouse model, we demonstrate oral bioavailability; rapid engagement of SOD1G93A by S-XL6 that increases SOD1G93A's in vivo half-life; and that S-XL6 crosses the blood-brain barrier. S-XL6 demonstrated a degree of selectivity by avoiding off-target binding to plasma proteins. Taken together, our results indicate that cyclic thiosulfinate-mediated SOD1 stabilization should receive further attention as a potential therapeutic approach for fALS.
Subject(s)
Amyotrophic Lateral Sclerosis , Animals , Mice , Amyotrophic Lateral Sclerosis/drug therapy , Amyotrophic Lateral Sclerosis/genetics , Amyotrophic Lateral Sclerosis/metabolism , Cysteine/genetics , Mutation , Superoxide Dismutase/genetics , Superoxide Dismutase/chemistry , Superoxide Dismutase/metabolism , Superoxide Dismutase-1/geneticsABSTRACT
Sustainable and renewable biomass-derived porous carbon (BPC) have garnered considerable attention owing to their low cost, high specific surface area, and outstanding electrochemical performance. However, the subpar energy density severely restricts the applications of BPC in high-energy-density devices. Herein, a high-surface-area porous carbon with multiple heteroatoms doping was derived from rapeseed meals by hydrothermal carbonization and high-temperature activation. The rapeseed meal-derived activated carbon (RMAC) exhibits a remarkable surface area of 3291 m2 g-1 and is doped with nitrogen (1.05 at.%), oxygen (7.4 at.%), phosphorus (0.31 at.%), and sulfur, resulting in an impressive specific capacitance of 416 F g-1 at 1 A g-1. Furthermore, even after 10,000 cycles, the optimized RMAC-800 electrode maintains 92 % of its initial capacitance, attesting to its exceptional performance. Through comprehensive density functional theory (DFT) calculations, the elements O, N, P, and S can significantly enhance the electron negativity and density, improving the adsorption and diffusion of K+ to attain a high capacitance. To assess the RMAC-800's practical performance, an asymmetric supercapacitor with 1 M [BMIM]BF4/AN electrolyte was produced that delivered a high energy density of 195.94 Wh kg-1 at a power density of 1125 W kg-1. Thus, we propose an eco-friendly strategy for producing BPC materials with outstanding electrochemical performance for supercapacitors.
Subject(s)
Brassica napus , Brassica rapa , Adsorption , Potassium , Biomass , Porosity , Physical Phenomena , CharcoalABSTRACT
The emerging nitrogen-embedded multiple resonance (MR) emitters with an indolo[3,2,1-jk] carbazole (ICz) unit have exhibited promising performance for high-resolution organic light-emitting diode (OLED) devices, while the underlying photophysics has been rarely reported. In this work, the optical spectra, color purity, and emitting efficiency of ICz-based MR emitters were investigated by using electronic structure and thermal vibration correlation function (TVCF) calculations. Unlike B-N MR emitters, the high color purity of investigated ICz-based MR emitters was mainly contributed by considerable structural rigidity, which also greatly affects the radiative decay rate and fluorescence quantum yield of the S1 state. For the majority of investigated emitters, potential reverse intersystem crossing (RISC) channels (T1 â S1 and T2 â S1) are limited by thermally inaccessible ΔEST* or insufficient spin-orbital coupling (SOC), which can be distinguished by the calculated temperature-dependent RISC rate pattern. We provided a systematic photophysical picture for ICz-based MR emitters that might be interesting for the OLED design and application community.
ABSTRACT
Background & Aims: HBV infection is a global health burden. Covalently closed circular DNA (cccDNA) transcriptional regulation is a major cause of poor cure rates of chronic hepatitis B (CHB) infection. Herein, we evaluated whether targeting host factors to achieve functional silencing of cccDNA may represent a novel strategy for the treatment of HBV infection. Methods: To evaluate the effects of Jumonji C domain-containing (JMJD2) protein subfamily JMJD2A-2D proteins on HBV replication, we used lentivirus-based RNA interference to suppress the expression of isoforms JMJD2A-2D in HBV-infected cells. JMJD2D-knockout mice were generated to obtain an HBV-injected model for in vivo experiments. Co-immunoprecipitation and ubiquitylation assays were used to detect JMJD2D-HBx interactions and HBx stability modulated by JMJD2D. Chromatin immunoprecipitation assays were performed to investigate JMJD2D-cccDNA and HBx-cccDNA interactions. Results: Among the JMJD2 family members, JMJD2D was significantly upregulated in mouse livers and human hepatoma cells. Downregulation of JMJD2D inhibited cccDNA transcription and HBV replication. Molecularly, JMJD2D sustained HBx stability by suppressing the TRIM14-mediated ubiquitin-proteasome degradation pathway and acted as a key co-activator of HBx to augment HBV replication. The JMJD2D-targeting inhibitor, 5C-8-HQ, suppressed cccDNA transcription and HBV replication. Conclusion: Our study clarified the mechanism by which JMJD2D regulates HBV transcription and replication and identified JMJD2D as a potential diagnostic biomarker and promising drug target against CHB, and HBV-associated hepatocarcinoma. Impact and implications: HBV cccDNA is central to persistent infection and is a major obstacle to healing CHB. In this study, using cellular and animal HBV models, JMJD2D was found to stabilise and cooperate with HBx to augment HBV transcription and replication. This study reveals a potential novel translational target for intervention in the treatment of chronic hepatitis B infection.