Cell spray printing combined with Lycium barbarum glycopeptide promotes repair of corneal epithelial injury.

The corneal epithelium, located as the outermost layer of the cornea, is inherently susceptible to injuries that may lead to corneal opacities and compromise visual acuity. Rapid restoration of corneal epithelial injury is crucial for maintaining the transparency and integrity of the cornea. Cell spray treatment emerges as an innovative and effective approach in the field of regenerative medicine. In our study, a cell spray printing platform was established, and the optimal printing parameters were determined to be a printing air pressure of 5 PSI (34.47 kPa) and a liquid flow rate of 30 ml/h. Under these conditions, the viability and phenotype of spray-printed corneal epithelial cells were preserved. Moreover, Lycium barbarum glycopeptide (LBGP), a glycoprotein purified from wolfberry, enhanced proliferation while simultaneously inhibiting apoptosis of the spray-printed corneal epithelial cells. We found that the combination of cell spray printing and LBGP facilitated the rapid construction of multilayered cell sheets on flat and curved collagen membranes in vitro. Furthermore, the combined cell spray printing and LBGP accelerated the recovery of the rat corneal epithelium in the mechanical injury model. Our findings offer a therapeutic avenue for addressing corneal epithelial injuries and regeneration.

The Emotion Regulation of Acupuncture in Chronic Low Back Pain: A Clinical Neuroimaging Protocol.

Introduction: Acupuncture is effective for patients with chronic low back pain (CLBP), which can relieve pain intensity and regulate negative emotional states such as pain-related anxiety and depression. Previous studies mainly discuss the analgesic mechanism of acupuncture treatment of CLBP, but there are multiple dimensions to pain, including sensation, emotion and cognition. Therefore, this study aims to investigate the central mechanism of acupuncture for CLBP from the perspective of emotional regulation by functional magnetic resonance imaging (fMRI). Methods and Analysis: A total of 72 patients with CLBP will be recruited in the study and randomly assigned to the verum acupuncture group or the sham acupuncture group. The trail will last for 18 weeks including a 2-week baseline, a 4-week treatment and a 12-week for follow-up period. The primary outcomes are the visual analog scale (VAS) and the Japanese Orthopaedic Association Scores (JOA) score. The secondary outcomes are the 12-item short form health survey (SF-12), the state trait anxiety inventory (STAI), the self-rating anxiety scale (SAS) and self-rating depression scale (SDS). The VAS, JOA, STAI SAS and SDS will be collected at baseline, week 2, week 4, and after follow-up. The SF-12 will be evaluated at baseline, week 2 and week 4. Functional magnetic resonance imaging (MRI) data will be collected at baseline and the end of treatment. Emotion-related brain regions will be chosen as regions of interest (ROIs). The gray matter volume (GMV), amplitude of low-frequency fluctuation (ALFF), regional homogeneity (ReHo), functional connectivity (FC), and large-scale functional brain network based on these ROIs will be analyzed within and between the two groups. Discussion: This study will verify the emotional regulation of acupuncture and explore the mechanism of acupuncture for emotion regulation in patients with CLBP. Trial Registration Number: https://www.chictr.org.cn/showproj.html?proj=195486, identifier: ChiCTR2300070557.

High performance solar-blind UV detector with Mg0.472Zn0.528O/Mg0.447Zn0.553O double layer structure on MgO substrate.

Mg0.472Zn0.528O/Mg0.447Zn0.553O double layer structure UV detectors are made on single structure MgO substrate by PLD method, and the effect of different thickness top MgZnO layer on the UV response characteristics of the detector are studied. Compared with the single layer MgZnO detector that made by Mg0.3Zn0.7O target, the Mg0.472Zn0.528O/Mg0.447Zn0.553O double layer detector with 30 nm top layer, shows much higher deep UV response (21.3 A W-1at 265 nm), much smaller dark current(66.9 pA) and much higher signal-to-noise ratio (2.8 × 105) at 25 V bias voltage. And the device also shows relative high response (23.1 A W-1) at 235 nm deep UV light at 25 V bias voltage, which is mainly attributed by the bottom MgZnO layer with higher Mg composition. When the top layer is 66.7 nm thick, the response of the Mg0.472Zn0.528O/Mg0.447Zn0.553O detector reached 228.8 A W-1at 255 nm under 25 V bias voltage, the signal-to-noise ratio of which is 10573 under 20 V bias voltage, and the near UV response of the device is also big because of more h-MgZnO in top MgZnO layer. When the top layer reached 90.2 nm, there are much more h-MgZnO in the top MgZnO layer, the peak response of the Mg0.472Zn0.528O/Mg0.447Zn0.553O detector is just 6.65 A W-1at 320 nm under 25 V bias voltage, the signal-to-noise ratio of which is 1248. The high Mg composition bottom MgZnO decrease the dark current of the Mg0.472Zn0.528O/Mg0.447Zn0.553O detector, both the 2DEG effect of the double layer structure and the amplify effect of the mix-phase MgZnO top layer, increased theIuvand deep UV response of the Mg0.472Zn0.528O/Mg0.447Zn0.553O detector. Therefore, the double layer Mg0.472Zn0.528O/Mg0.447Zn0.553O detector is more sensitive at faint deep UV light compared with previous reported MgZnO detectors, and the MgxZn1-xO/MgyZn1-yO detector shows similarIuvand signal-noise-ratio at faint deep UV light as high-temperature fabricated AlxGa1-xN/AlyGa1-yN detectors.

Efficacy and safety of eszopiclone combined with drug therapy in the treatment of insomnia after stroke: A network meta-analysis and systematic review.

OBJECTIVE: To evaluate the efficacy and safety of multi-drug therapy based on eszopiclone in the treatment of insomnia after stroke using a network meta-analysis method and to provide evidence for clinical practice. METHOD: Computer searches of PubMed, Excerpt Medica Database (Embase), Cochrane Library Central Register of Controlled Trials, APA PsycInfo, CNKI, WanFang, Sinomed and other databases were performed to search for clinical randomized controlled studies (RCTs) on multi-drug therapy based on eszopiclone in the treatment of insomnia patients after stroke. The search time was from the establishment of each database until July 2023. The bias risk assessment tool recommended by Cochrane was used to evaluate the quality of the included RCTs. Stata 14.0 was applied to perform network meta-analysis using Review Manager 5.3 software for traditional meta-analysis. RESULT: Eighteen RCTs and 1646 patients were ultimately included, involving 11 treatment options. The results of the network meta-analysis showed that the ranking of Pittsburgh Sleep Quality Index (PSQI) decline was eszopiclone combined with sweet dream oral liquid (ESZ+SDOL)>eszopiclone combined with a shugan jieyu capsule (ESZ+SGJYC)>eszopiclone combined with agomelatine (ESZ+AGO)>eszopiclone combined with flupentixol and melitracen tablets (ESZ+FMT)>eszopiclone combined with yangxue qingnao granules (ESZ+YXQNG)>eszopiclone combined with mirtazapine (ESZ+MIR)>ESZ>FMT; the modified Edinburgh Scandinavia Stroke Scale (MESSS) decline ranking was ESZ+SDOL>ESZ+AGO>ESZ; and the clinical total effective rate ranking was eszopiclone combined with a xuefu zhuyu capsule (ESZ+XFZYC)>ESZ+MIR>ESZ+SGJYC>ESZ+SDOL> ESZ+FMT>ESZ+YXQNG>ESZ>FMT. In terms of clinical adverse reactions, in addition to ESZ therapy, ESZ+ESC had the highest number of adverse reactions, with abdominal pain being the most common. ESZ+YXQNG had the most types of adverse reactions, with 8 types. CONCLUSION: Multi-drug therapy based on eszopiclone can effectively improve the sleep quality of patients with insomnia after stroke, and ESZ+SDOL has significant efficacy and safety. However, due to the limitations of this study, efficacy ranking cannot fully explain the superiority or inferiority of clinical efficacy. In the future, more multicentre, large sample, double-blind randomized controlled trials are needed to supplement and demonstrate the results of this study.

Universal Way to Enhance Solution-Processed High-κ Oxide Dielectrics Performance by Sulfate Incorporation.

Vacuum-free, solution-processable high-κ-oxide dielectrics are considered to be a key element for emerging low-cost flexible electronics. However, they usually suffer from low breakdown strength and frequency-dependent capacitance, which limit their broader applications. Here, we report a universal way to improve solution-based high-κ oxide dielectric properties (e.g., Al2O3, ZrO2, Ga2O3, Sc2O3, Ho2O3, and Sm2O3) by sulfate incorporation. In-depth characterization shows that sulfate incorporation could reduce hydrogen and oxygen vacancy-related defects in high-κ oxides, thereby improving the dielectric performance. The optimized S-doped high-κ oxides show smooth surface (rms < 0.20 nm), low leakage current (∼10-7 A/cm2@4 MV/cm), excellent dielectric breakdown strength (>10 MV/cm), and stable capacitance-frequency characteristics. Besides, oxide thin-film transistors based on these high-κ dielectrics exhibit excellent performance (e.g., mobility >20 cm2 V-1 s-1, on/off ratio of ∼107, threshold swing of ∼0.14 V dec-1, threshold voltage of ∼0 V, and hysteresis of ∼0.02 V). Thus, this work provides a general approach for the development of high-quality solution-based high-κ oxides for transistor circuitry.

Boronization: A General Strategy for Rare Earth Oxides with Enhanced High-κ Gate Dielectric Performance.

Rare earth oxides (REOs) can be used as high-κ gate dielectrics that are at the core of electronic devices. However, a bottleneck remains with regard to obtaining high-performance REO dielectrics due to the serious hygroscopic issue and high defect states. Here, a general boronization strategy is reported to enhance the high-κ REO gate dielectric performance. Complementary characterization reveals that boronization is capable of reducing oxygen vacancies/hydroxyl defects in REOs and suppressing moisture absorption, leading to the improvement of leakage current, breakdown strength (up to 9 MV/cm), and capacitance-frequency stability. Furthermore, oxide transistors based on boronized REO dielectrics demonstrate state-of-the-art device characteristics with a high mobility of 40 cm2/V s, a current on/off ratio of 108, a subthreshold swing of 82 mV/dec, a hysteresis of 0.05 V, and superior bias stress stability.

PLSCR1 promotes apoptosis and clearance of retinal ganglion cells in glaucoma pathogenesis.

Glaucoma is the leading cause of irreversible blindness worldwide. In the pathogenesis of glaucoma, activated microglia can lead to retinal ganglion cells (RGCs) apoptosis and death, however, the molecular mechanisms remain largely unknown. We demonstrate that phospholipid scramblase 1 (PLSCR1) is a key regulator promoting RGCs apoptosis and their clearance by microglia. As evidenced in retinal progenitor cells and RGCs of the acute ocular hypertension (AOH) mouse model, overexpressed PLSCR1 induced its translocation from the nucleus to the cytoplasm and cytomembrane, as well as elevated phosphatidylserine exposure and reactive oxygen species generation with subsequent RGCs apoptosis and death. These damages were effectively attenuated by PLSCR1 inhibition. In the AOH model, PLSCR1 led to an increase in M1 type microglia activation and retinal neuroinflammation. Upregulation of PLSCR1 resulted in strongly elevated phagocytosis of apoptotic RGCs by activated microglia. Taken together, our study provides important insights linking activated microglia to RGCs death in the glaucoma pathogenesis and other RGC-related neurodegenerative diseases.

A systematic review and meta-analysis of voxel-based morphometric studies of fibromyalgia.

Objective: Although neuroimaging investigations have revealed significant changes in brain structure in fibromyalgia (FM) patients, these findings are inconsistent. The current study conducted a systematic review and meta-analysis of voxel-based morphometric studies in order to comprehend those alterations in brain structure in FM patients. Methods: Voxel-based morphometric (VBM) studies published up to January 17, 2023 were searched in the Web of Science, PubMed, EMBASE, Cochrane Library (CENTRAL), China National Knowledge Infrastructure (CNKI), Chongqing VIP, Wanfang Database. Two independent researchers carried out study screening, quality assessment, clinical data and neuroimaging data extraction. The whole-brain voxel-based gray matter (GM) data of FM patients were collected from eligible studies, and meta-analyzed using anisotropic effect size-signed differential mapping (AES-SDM). Results: Twelve researches were included in this study, including 289 FM patients (mean age: 47.36 years) and 272 HS (mean age: 47.34 years). According to the meta-analysis, FM patients had increased GM in the right postcentral gyrus and left angular gyrus, and decreased GM in the right cingulate gyrus, right paracingulate gyrus, left cerebellum, and left gyrus rectus. Conclusion: Our study suggests that fibromyalgia patients have altered gray matter in several brain regions that are involved in affective, cognitive functions, and in motor adaptations to pain processing.

High-Performance Thin-Film Transistors with ZnO:H/ZnO Double Active Layers Fabricated at Room Temperature.

H doping can enhance the performance of ZnO thin-film transistors (TFTs) to a certain extent, and the design of double active layers is an effective way to further improve a device's performance. However, there are few studies on the combination of these two strategies. We fabricated TFTs with ZnO:H (4 nm)/ZnO (20 nm) double active layers by magnetron sputtering at room temperature, and studied the effect of the hydrogen flow ratio on the devices' performance. ZnO:H/ZnO-TFT has the best overall performance when H2/(Ar + H2) = 0.13% with a mobility of 12.10 cm2/Vs, an on/off current ratio of 2.32 × 107, a subthreshold swing of 0.67 V/Dec, and a threshold voltage of 1.68 V, which is significantly better than the performance of single active layer ZnO:H-TFTs. This exhibits that the transport mechanism of carriers in double active layer devices is more complicated. On one hand, increasing the hydrogen flow ratio can more effectively suppress the oxygen-related defect states, thus reducing the carrier scattering and increasing the carrier concentration. On the other hand, the energy band analysis shows that electrons accumulate at the interface of the ZnO layer close to the ZnO:H layer, providing an additional path for carrier transport. Our research exhibits that the combination of a simple hydrogen doping process and double active layer construction can achieve the fabrication of high-performance ZnO-based TFTs, and that the whole room temperature process also provides important reference value for the subsequent development of flexible devices.

Regulation of the Keratocyte Phenotype and Cell Behavior Derived from Human Induced Pluripotent Stem Cells by Substrate Stiffness.

Substrate stiffness has been indicated as an important factor to control stem cell fate, including proliferation and differentiation. To optimize the stiffness for the differentiation process from h-iPSCs (human induced pluripotent stem cells) into h-iCSCs (human corneal stromal cells derived from h-iPSCs) and the phenotypic maintenance of h-iCSCs in vitro, h-iPSCs were cultured on matrigel-coated tissue culture plate (TCP) (106 kPa), matrigel-coated polydimethylsiloxane (PDMS) 184 (1250 kPa), and matrigel-coated PDMS 527 (4 kPa) before they were differentiated to h-iCSCs. Immunofluorescence staining, quantitative real-time polymerase chain reaction (RT-qPCR), and western blot demonstrated that the stiffer substrate TCP promoted the h-iCSCs' differentiation from h-iPSCs. On the contrary, softer PDMS 527 was more effective to maintain the phenotype of h-iCSCs cultured in vitro. Finally, we cultured h-iCSCs on PDMS 527 until P3 and seeded them on a biomimetic collagen membrane to form the single-layer and multiple-layer bioengineered corneal stroma with high transparency properties and cell survival rate. In conclusion, the study is helpful for differentiating h-iPSCs to h-iCSCs and corneal tissue engineering by manipulating stiffness mechanobiology.

MSLF-Net: A Multi-Scale and Multi-Level Feature Fusion Net for Diabetic Retinopathy Segmentation.

Diabetic Retinopathy (DR) is a diabetic complication that predisposes patients to visual impairments that could lead to blindness. Lesion segmentation using deep learning algorithms is an effective measure to screen and prevent early DR. However, there are several types of DR with varying sizes and high inter-class similarity, making segmentation difficult. In this paper, we propose a supervised segmentation method (MSLF-Net) based on multi-scale-multi-level feature fusion to achieve accurate end-to-end DR lesion segmentation. MSLF-Net builds a Multi-Scale Feature Extraction (MSFE) module to extract multi-scale information and provide more comprehensive features for segmentation. This paper further introduces the Multi-Level Feature Fusion (MLFF) module to improve feature fusion using a cross-layer structure. This structure only fuses low- and high-level features of the same class based on category supervision, avoiding feature contamination. Moreover, this paper produces additional masked images for the dataset and performs image enhancement operations to ensure that the proposed method is trainable and functional on small datasets. The extensive experiments are conducted on public datasets IDRID and e_ophtha. The results showed that our proposed feature enhancement method can perform feature fusion more effectively. Therefore, In the end-to-end DR segmentation neural network model, MSLF Net is superior to other similar models in segmentation, and can effectively improve the DR lesion segmentation performance.

Aqueous Solution-Grown Crystalline Phosphorus Doped Indium Oxide for Thin-Film Transistors Applications.

Solution-grown indium oxide (In2O3) based thin-film transistors (TFTs) hold good prospects for emerging advanced electronics due to their excellent mobility, prominent transparency, and possibility of low-cost and scalable manufacturing; however, pristine In2O3 TFTs suffer from poor switching characteristics due to intrinsic oxygen-vacancy-related defects and require external doping. According to Shanmugam's theory, among potential dopants, phosphorus (P) has a large dopant-oxygen bonding strength (EM-O) and high Lewis acid strength (L) that would suppress oxygen-vacancy related defects and mitigate dopant-induced carrier scattering; however, P-doped In2O3 (IPO) TFTs have not yet been demonstrated. Here, we report aqueous solution-grown crystalline IPO TFTs for the first time. It is suggested that the incorporation of P could effectively inhibit oxygen-vacancy-related defects while maintaining high mobility. This work experimentally demonstrates that dopant with high EM-O and L is promising for emerging oxide TFTs.

Water-Induced Nanometer-Thin Crystalline Indium-Praseodymium Oxide Channel Layers for Thin-Film Transistors.

We report water-induced nanometer-thin crystalline indium praseodymium oxide (In-Pr-O) thin-film transistors (TFTs) for the first time. This aqueous route enables the formation of dense ultrathin (~6 nm) In-Pr-O thin films with near-atomic smoothness (~0.2 nm). The role of Pr doping is investigated by a battery of experimental techniques. It is revealed that as the Pr doping ratio increases from 0 to 10%, the oxygen vacancy-related defects could be greatly suppressed, leading to the improvement of TFT device characteristics and durability. The optimized In-Pr-O TFT demonstrates state-of-the-art electrical performance with mobility of 17.03 ± 1.19 cm2/Vs and on/off current ratio of ~106 based on Si/SiO2 substrate. This achievement is due to the low electronegativity and standard electrode potential of Pr, the high bond strength of Pr-O, same bixbyite structure of Pr2O3 and In2O3, and In-Pr-O channel's nanometer-thin and ultrasmooth nature. Therefore, the designed In-Pr-O channel holds great promise for next-generation transistors.

Water-Processed Ultrathin Crystalline Indium-Boron-Oxide Channel for High-Performance Thin-Film Transistor Applications.

Thin-film transistors (TFTs) made of solution-processable transparent metal oxide semiconductors show great potential for use in emerging large-scale optoelectronics. However, current solution-processed metal oxide TFTs still suffer from relatively poor device performance, hindering their further advancement. In this work, we create a novel ultrathin crystalline indium-boron-oxide (In-B-O) channel layer for high-performance TFTs. We show that high-quality ultrathin (~10 nm) crystalline In-B-O with an atomically smooth nature (RMS: ~0.15 nm) could be grown from an aqueous solution via facile one-step spin-coating. The impacts of B doping on the physical, chemical and electrical properties of the In2O3 film are systematically investigated. The results show that B has large metal-oxide bond dissociation energy and high Lewis acid strength, which can suppress oxygen vacancy-/hydroxyl-related defects and alleviate dopant-induced carrier scattering, resulting in electrical performance improvement. The optimized In-B-O (10% B) TFTs based on SiO2/Si substrate demonstrate a mobility of ~8 cm2/(V s), an on/off current ratio of ~106 and a subthreshold swing of 0.86 V/dec. Furthermore, by introducing the water-processed high-K ZrO2 dielectric, the fully aqueous solution-grown In-B-O/ZrO2 TFTs exhibit excellent device performance, with a mobility of ~11 cm2/(V s), an on/off current of ~105, a subthreshold swing of 0.19 V/dec, a low operating voltage of 5 V and superior bias stress stability. Our research opens up new avenues for low-cost, large-area green oxide electronic devices with superior performance.

Aqueous Solution-Processed Nanometer-Thin Crystalline Indium Ytterbium Oxide Thin-Film Transistors.

We demonstrate the growth of ultra-thin (~5 nm) indium ytterbium oxide (In-Yb-O) thin film using a simple vacuum-free aqueous solution approach for the first time. The influences of Yb addition on the microstructural, chemical, optical, and electrical properties of In2O3 are well investigated. The analyses indicate that Yb dopant could suppress oxygen vacancy defects effectively owing to the lower standard electrode potential, lower electronegativity, and stronger metal-oxide bond strength than that of In. The optimized In-Yb-O thin-film transistors (TFTs) exhibit excellent electrical performance (mobility of 8 cm2/Vs and on/off ratio of ~108) and enhanced stability. The triumph of In-Yb-O TFTs is owing to the high quality In2O3 matrix, the remarkable suppressor of Yb, and the nanometer-thin and atomically smooth nature (RMS: ~0.26 nm) of channel layer. Therefore, the eco-friendly water-induced ultra-thin In-Yb-O channel provides an excellent opportunity for future large-scale and cost-effective electronic applications.

High Photoresponse Black Phosphorus TFTs Capping with Transparent Hexagonal Boron Nitride.

Black phosphorus (BP), a single elemental two-dimensional (2D) material with a sizable band gap, meets several critical material requirements in the development of future nanoelectronic applications. This work reports the ambipolar characteristics of few-layer BP, induced using 2D transparent hexagonal boron nitride (h-BN) capping. The 2D h-BN capping have several advantages over conventional Al2O3 capping in flexible and transparent 2D device applications. The h-BN capping technique was used to achieve an electron mobility in the BP devices of 73 cm2V-1s-1, thereby demonstrating n-type behavior. The ambipolar BP devices exhibited ultrafast photodetector behavior with a very high photoresponsivity of 1980 mA/W over the ultraviolet (UV), visible, and infrared (IR) spectral ranges. The h-BN capping process offers a feasible approach to fabricating n-type behavior BP semiconductors and high photoresponse BP photodetectors.

Great Enhancement Effect of 20-40 nm Ag NPs on Solar-Blind UV Response of the Mixed-Phase MgZnO Detector.

High-performance solar-blind UV detector with high response and fast speed is needed in multiple types of areas, which is hard to achieve in one device with a simple structure and device fabrication process. Here, the effects of Ag nanoparticles (NPs) with different sizes on UV response characteristics of the device are studied, the Ag NPs with different sizes that are made from a simple vacuum anneal method. Ag NPs with different sizes could modulate the peak response position of the mixed-phase MgZnO detector from near UV range (350 nm) to deep UV range (235 nm), and the enhancement effect of the Ag NPs on the UV response differs much with the crystal structure and the basic UV response of the MgZnO thin film. When high density 20-40 nm Ag NPs is induced, the deep UV (235 nm) response of the mixed-phase MgZnO detector is increased by 226 times, the I uv/I dark ratio of the modified device is increased by 17.5 times. The slight enhancement in UV light intensity from 20 to 40 nm Ag NPs induces multiple tunnel breakdown phenomena within the mixed-phase MgZnO thin film, which is the main reason for the abnormal great enhancement effect on deep UV response of the device, so the recovery speed of the modified device is not influenced. Therefore, Ag NPs with different sizes could effectively modulate the UV response peak position of mixed-phase MgZnO thin films, and the introduction of Ag NPs with high density and small size is a simple way to greatly increase the sensitivity of the mixed-phase MgZnO detector at deep UV light without decreasing the device speed.

UV response characteristics of mixed-phase MgZnO thin films with different structure distribution and high Iuv/Idarkratio and fast speed MgZnO UV detector with tunneling breakdown mechanism.

High performance UV detector with both high response and fast speed is hard to made on homogeneous crystal semiconductor materials. Here, the UV response characteristics of mix-phase MgZnO thin films with different internal structure distribution are studied, the mix-phase MgZnO based detector with given crystal composition own high response at both deep UV light (96 A/W at 240nm) and near UV light (80 A/W at 335nm). Meanwhile, because of quasi-tunneling breakdown mechanism within the device, the high response UV detector also show fast response speed (tr= 0.11 µs) and recovery speed (td1=26 µs) at deep UV light, which are much faster than the both low response mix-phase MgZnO based UV detectors with other structure constitution and reported high response UV devices on homogenous crystal materials. The Idarkof the device is just 4.27 pA under a 5 V bias voltage, so the signal to noise ratio of the device reached 23852 at 5.5uW/cm2 235nm UV light. Therefore, new quasi-tunneling breakdown mechanism is observed in some mix-phase MgZnO thin film that contains both c-MgZnO and h-MgZnO parts, which introduced high response, signal to noise ratio and fast speed into mix-phase MgZnO based UV detector at weak deep UV light.