Se-Doping on Co4S3 Cathode Based on Soft Anion Chemistry to Enhance Magnesium Storage Performance.

Rechargeable magnesium batteries (RMBs) have gradually got attention due to the high theoretical capacity, low cost and high security. However, the lack of suitable cathode materials has been a major obstacle to the development of RMBs. Transition metal sulfides (TMSs) have been studied extensively because of their high theoretical specific capacity and other advantages. However, the diffusion rate of Mg2+ in TMSs is slow and side reactions are easy to occur. In this work, soft anion doping strategy was adopted at Co4S3 cathode material. After doping the appropriate content of Se, it showed the specific capacity of 248 mAh g-1 at a current density of 100 mA g-1. The mechanism of magnesium storage was investigated by ex-situ technique. This work laid a foundation for researching cobalt-based sulfide in cathode materials of RMBs.

Panthenol Additives with Multiple Coordination Sites Induce Uniform Zinc Deposition and Inhibited Side Reactions for High Performance Aqueous Zinc Metal Battery.

Application of aqueous zinc metal batteries (AZMBs) in large-scale new energy systems (NESs) is challenging owing to the growth of dendrites and frequent side reactions. Here, this study proposes the use of Panthenol (PB) as an electrolyte additive in AZMBs to achieve highly reversible zinc plating/stripping processes and suppressed side reactions. The PB structure is rich in polar groups, which led to the formation of a strong hydrogen bonding network of PB-H2O, while the PB molecule also builds a multi-coordination solvated structure, which inhibits water activity and reduces side reactions. Simultaneously, PB and OTF- decomposition, in situ formation of SEI layer with stable organic-inorganic hybrid ZnF2-ZnS interphase on Zn anode electrode, can inhibit water penetration into Zn and homogenize the Zn2+ plating. The effect of the thickness of the SEI layer on the deposition of Zn ions in the battery is also investigated. Hence, this comprehensive regulation strategy contributes to a long cycle life of 2300 h for Zn//Zn cells assembled with electrolytes containing PB additives. And the assembled Zn//NH4V4O10 pouch cells with homemade modules exhibit stable cycling performance and high capacity retention. Therefore, the proposed electrolyte modification strategy provides new ideas for AZMBs and other metal batteries.

Layered Na2Ti3O7 as an Ultrastable Intercalation-Type Anode for Non-Aqueous Calcium-Ion Batteries.

Calcium ion batteries (CIBs) are a promising energy storage device due to the low redox potential of the Ca metal and the abundant reserves of the Ca element. However, the large radius and divalent nature of Ca2+ lead to its slow ion diffusion kinetics and the lack of suitable electrode materials for Ca storage. Here, a layered structure of Na2Ti3O7 (NTO) is presented as an anode material for nonaqueous CIBs. This NTO anode demonstrates a high discharge capacity of 165 mA h g-1 at 100 mA g-1 and a remarkable capacity retention rate of 80%, even after 2000 cycles at 500 mA g-1, surpassing the performance of all reported intercalation-type anode materials for CIBs. The NTO transfers to layered CaVIINaIXTi3O7 (CNTO) with intercalation of Ca2+ and extraction of Na+ during the first discharge process. Then, the CNTO undergoes the reversible insertion/extraction of Ca2+ during subsequent cycling. Additionally, density functional theory calculations reveal that NTO possesses a rapid two-dimensional diffusion pathway for Ca2+. Moreover, the full CIBs based on NTO as the anode further underscore its potential for CIBs. This work presents promising anode materials for CIBs, offering opportunities to promote the development of high-performance CIBs.

Trigger a multi-electron reaction by tailoring electronic structure of VO2 toward more efficient aqueous zinc metal batteries.

VO2 (B) is recognized as a promising cathode material for aqueous zinc metal batteries (AZMBs) owing to its remarkable specific capacity and its unique, expansive tunnel structure, which facilitates the reversible insertion and extraction of Zn2+. Nonetheless, challenges such as the inherent instability of the VO2 structure, poor ion/electron transport and a limited capacity due to the low redox potential of the V3+/V4+ couple have hindered its wider application. In this study, we present a strategy to replace vanadium ions by doping Al3+ in VO2. This approach activates the multi-electron reaction (V4+/V5+), to increase the specific capacity and improve the structural stability by forming robust V5+O and Al3+O bonds. It also induces a local electric field by altering the local electron arrangement, which significantly accelerates the ion/electron transport process. As a result, Al-doped VO2 exhibits superior specific capacity, improved cycling stability, and accelerated electronic transport kinetics compared to undoped VO2. The beneficial effects of heterogeneous atomic doping observed here may provide valuable insights into the improvement electrode materials in metal-ion battery systems other than those based on Zn.

"Triple-synergistic effect" of K+ and PANI co-intercalation enabling the high-rate capability and stability of V2O5 for aqueous zinc-ion batteries.

Vanadium-based materials are widely recognized as the primary candidate cathode materials for aqueous Zn-ion batteries (AZIBs). However, slow kinetics and poor stability pose significant challenges for widespread application. Herein, to address these issues, alkali metal ions and polyaniline (PANI) are introduced into layered hydrated V2O5 (VO). Density functional theory calculations reveal that the synthesized (C6H4NH)0.27K0.24V2O5·0.92H2O (KPVO), with K+ and PANI co-intercalation, exhibits a robust interlayer structure and a continuous three-dimensional (3D) electron transfer network. These properties facilitate the reversible diffusion of Zn2+ with a low migration potential barrier and rapid response kinetics. The KPVO cathode exhibits a discharge specific capacity of 418.3 mAh/g at 100 mA/g and excellent cycling stability with 89.5 % retention after 3000 cycles at 5 A/g. This work provides a general strategy for integrating cathode materials to achieve high specific capacity and excellent kinetic performance.