Molecular Cloning of the scd1 Gene and Its Expression in Response to Feeding Artificial Diets to Mandarin Fish (Siniperca chuatsi).

Background/Objectives: Stearoyl-coenzyme A desaturase 1 (SCD1) plays a crucial role in fatty acid metabolism. However, its roles in the feeding habit transformation of mandarin fish (Siniperca chuatsi) remain largely unknown. Methods: Juvenile mandarin fish (10.37 ± 0.54)g were trained to feed on an artificial diet and then divided into artificial diet feeders and nonfeeders according to their feed preference. Afterwards, the scd1 gene of mandarin fish (Sc-scd1) was identified and characterized, and its transcription difference was determined between S. chuatsi fed live artificial diets and those fed prey fish. Results: Our results show that Sc-scd1 coding sequence is 1002 bp long, encoding 333 amino acids. The assumed Sc-SCD1 protein lacks a signal peptide, and it contains 1 N-linked glycosylation site, 24 phosphorylation sites, 4 transmembrane structures, and 3 conserved histidine elements. We found that Sc-SCD1 exhibits a high similarity with its counterparts in other fish by multiple alignments and phylogenetic analysis. The expression level of Sc-scd1 was detected with different expression levels in all tested tissues between male and female individuals fed either live prey fish or artificial diets. Conclusions: In particular, the Sc-scd1 expression level was the highest in the liver of both male and female mandarin fish fed artificial diets, indicating that scd1 genes may be associated with feed adaption of mandarin fish. Taken together, our findings offer novel perspectives on the potential roles of scd1 in specific domestication, and they provide valuable genetic information on feeding habits for the domestication of mandarin fish.

Enzymatic Characterization of SpPAL Genes in S. polyrhiza and Overexpression of the SpPAL3.

Phenylalanine ammonia-lyase (PAL, EC 4.3.1.5) catalyzes the deamination of phenylalanine, which is the initial step in the biosynthesis of phenylpropanoids. It serves as a crucial enzyme that facilitates the transfer of carbon from primary to secondary metabolism in plants. Duckweed is regarded as a promising chassis plant in synthetic biology research and application, due to its being rich in secondary metabolites and other advantages. The genes encoding PAL in Spirodela polyrhiza (L.) Schleid, the giant duckweed, were investigated in this study. Three SpPAL genes (SpPAL1-SpPAL3) were identified and cloned. All of them were successfully expressed in E. coli, and their recombinant proteins all showed PAL activity. In addition, SpPAL1 and SpPAL2 proteins could also utilize tyrosine as substrate, although the activity was low. A qRT-PCR analysis demonstrated that the expression of SpPAL3 was most pronounced in young fronds. It was found that the expression of SpPAL1 and SpPAL3 was significantly induced by MeJA treatment. Overexpression of SpPAL3 in Lemna turionifera inhibited the growth of fronds and adventitious roots in the transgenic plants, indicating the importance of SpPAL3 in duckweed besides its involvement in the secondary metabolism.

Development of a Golden Gate Assembly-Based Genetic Toolbox for Lactiplantibacillus plantarum and Its Application for Engineering Monoterpenoid Biosynthesis.

Lactiplantibacillus plantarum is a food-grade lactic acid bacterium widely used in the food and beverage industry. Recently, this probiotic organism has been applied as a biofactory for the production of pharmaceutical and food-related compounds, but existing promoters and expression vectors for the genetic engineering of L. plantarum rely on inefficient cloning strategies and are usually not well-characterized. We therefore developed a modular and standardized Golden Gate Assembly-based toolbox for the de novo assembly of shuttle vectors from Escherichia coli to L. plantarum. A collection of the most relevant genetic parts, e.g., different origins of replication and promoters, was incorporated in our toolbox and thoroughly characterized by flow cytometry and the fluorescence assay. Standardized fusion sites allow combining the genetic part freely into a plasmid in one step. This approach allows for the high-throughput assembly of numerous constructs in a standardized genetic context, thus improving the efficiency and predictability of metabolic engineering in L. plantarum. Using our toolbox, we were able to produce the aroma compounds linalool and geraniol in L. plantarum by extending its native mevalonate pathway with plant-derived monoterpenoid synthases.

Modular, inducible, and titratable expression systems for Escherichia coli and Acinetobacter baumannii.

Gene expression systems that transcend species barriers are needed for cross-species analysis of gene function. In particular, expression systems that can be utilized in both model and pathogenic bacteria underpin comparative functional approaches that inform conserved and variable features of bacterial physiology. In this study, we develop replicative and integrative vectors alongside a novel, IPTG-inducible promoter that can be used in the model bacterium Escherichia coli K-12 as well as strains of the antibiotic-resistant pathogen, Acinetobacter baumannii. We generate modular vectors that transfer by conjugation at high efficiency and either replicate or integrate into the genome, depending on design. Embedded in these vectors, we also developed a synthetic, IPTG-inducible promoter, PabstBR, that induces to a high level but is less leaky than the commonly used trc promoter. We show that PabstBR is titratable at both the population and single-cell levels, regardless of species, highlighting the utility of our expression systems for cross-species functional studies. Finally, as a proof of principle, we use our integrating vector to develop a reporter for the E. coli envelope stress σ factor, RpoE, and deploy the reporter in E. coli and A. baumannii, finding that A. baumannii does not recognize RpoE-dependent promoters unless RpoE is heterologously expressed. We envision that these vector and promoter tools will be valuable for the community of researchers who study the fundamental biology of E. coli and A. baumannii.IMPORTANCEAcinetobacter baumannii is a multidrug-resistant, hospital-acquired pathogen with the ability to cause severe infections. Understanding the unique biology of this non-model bacterium may lead to the discovery of new weaknesses that can be targeted to treat antibiotic-resistant infections. In this study, we provide expression tools that can be used to study the gene function in A. baumannii, including in drug-resistant clinical isolates. These tools are also compatible with the model bacterium, Escherichia coli, enabling cross-species comparisons of gene function. We anticipate that the use of these tools by the scientific community will accelerate our understanding of Acinetobacter biology.

Characterisation of seryl tRNA synthetase (srs-2) in Haemonchus contortus and Teladorsagia circumcincta.

The aim of the study was to purify and characterise recombinant proteins with the potential as an anti-parasite vaccine. Full-length cDNAs encoding seryl-tRNA synthetase (srs-2) were cloned from Haemonchus contortus (HcSRS-2) and Teladorsagia circumcincta (TcSRS-2). TcSRS-2 and HcSRS-2 cDNA (1458bp) encoded proteins of 486 amino acids, each of which was present as a single band of about 55 kDa on SDS-PAGE. Multiple alignments of the protein sequences showed homology of 94% between TcSRS-2 and HcSRS-2, 76-93% with SRS-2s of eight nematodes and 68% with Mus musculus SRS-2. The predicted three-dimensional structures revealed an overall structural homology of TcSRS-2 and HcSRS-2, highly conserved binding and catalytic sites, and minor differences in the tautomerase binding site residues in other nematode SRS-2 homologues. A phylogenetic tree was constructed using helminth and mammalian SRS-2 sequences. Soluble C-terminal SRS-2 proteins were expressed in Escherichia coli strain AY2.4 and purified. Recombinant HcSRS-2 assay shows that the recombinant enzyme was active and stable. The Km and Vmax for ATP were 3.9 ± 1.0 µM and 2.7 ± 0.1 µmoles min-1 mg-1 protein, respectively. Antibodies in serum and saliva from field-immune, but not nematode-naïve, sheep recognised recombinant HcSRS-2 and TcSRS-2 in enzyme-linked immunosorbent assays. Recognition of the recombinant proteins by antibodies generated by exposure of sheep to the native enzyme indicates similar antigenicity of the two proteins.

Modular Cloning Tools for Streptomyces spp. and Application to the De Novo Biosynthesis of Flavokermesic Acid.

The filamentous Streptomyces are among the most prolific producers of bioactive natural products and are thus attractive chassis for the heterologous expression of native and designed biosynthetic pathways. Although suitable Streptomyces hosts exist, including genetically engineered cluster-free mutants, the approach is currently limited by the relative paucity of synthetic biology tools facilitating the de novo assembly of multicomponent gene clusters. Here, we report a modular system (MoClo) for Streptomyces including a set of adapted vectors and genetic elements, which allow for the construction of complete genetic circuits. Critical functional validation of each of the elements was obtained using the previously reported ß-glucuronidase (GusA) reporter system. Furthermore, we provide proof-of-principle for the toolbox inS. albus, demonstrating the efficient assembly of a biosynthetic pathway to flavokermesic acid (FK), an advanced precursor of the commercially valuable carminic acid.

Combinatorial iterative method for metabolic engineering of Yarrowia lipolytica: Application for betanin biosynthesis.

Combinatorial library-based metabolic engineering approaches allow lower cost and faster strain development. We developed a genetic toolbox EXPRESSYALI for combinatorial engineering of the oleaginous yeast Yarrowia lipolytica. The toolbox enables consecutive rounds of engineering, where up to three combinatorially assembled gene expression cassettes can be integrated into each yeast clone per round. The cassettes are integrated into distinct intergenic sites or an open reading frame of a target gene if a simultaneous gene knockout is desired. We demonstrate the application of the toolbox by optimizing the Y. lipolytica to produce the red beet color betanin via six consecutive rounds of genome editing and screening. The library size varied between 24 and 360. Library screening was facilitated by automated color-based colony picking. In the first round, betanin pathway genes were integrated, resulting in betanin titer of around 20 mg/L. Through the following five consecutive rounds, additional biosynthetic genes were integrated, and the precursor supply was optimized, resulting in a titer of 70 mg/L. Three beta-glucosidases were deleted to prevent betanin deglycosylation, which led to a betanin titer of 130 mg/L in a small scale and a titer of 1.4 g/L in fed-batch bioreactors. The EXPRESSYALI toolbox can facilitate metabolic engineering efforts in Y. lipolytica (available via AddGene Cat. Nr. 212682-212704, Addgene kit ID # 1000000245).

Discovery and biosynthesis of non-canonical C16-terpenoids from Pseudomonas.

Biosynthesis of sodorifen with a unique C16-bicyclo[3.2.1]octene framework requires an S-adenosyl methionine-dependent methyltransferase SodC and terpene cyclase SodD. While bioinformatic analyses reveal a wide distribution of the sodCD genes organization in bacteria, their functional diversity remains largely unknown. Herein, two sodorifen-type gene clusters, pcch and pcau, from Pseudomonas sp. are heterologously expressed in Escherichia coli, leading to the discovery of two C16 terpenoids. Enzymatic synthesis of these compounds is achieved using the two (SodCD-like) pathway-specific enzymes. Enzyme assays using different combinations of methyltransferases and terpene synthases across the pcch, pcau, and sod pathways reveal a unifying biosynthetic mechanism: all three SodC-like enzymes methylate farnesyl pyrophosphate (FPP) with subsequent cyclization to a common intermediate, pre-sodorifen pyrophosphate. Structural diversification of this joint precursor solely occurs by the subsequently acting individual terpene synthases. Our findings expand basic biosynthetic understanding and structural diversity of unusual C16-terpenoids.

Cloning of down-regulated genes under cold stress and identification of important genes related to cold tolerance in zebrafish (Danio rerio).

Low-temperature stress poses a significant risk to the survival of both cultivated and wild fish populations. Existing studies have found that the pre-acclimation of fishes to moderate cold stress can stimulate the activation of acclimation pathways, thereby enhancing their tolerance to cold stress. The fitness of fish relies heavily on appropriately controlled transcriptional reactions to environmental changes. Despite previous characterization of gene expression profiles in various fish species during cold acclimation, the specific genes responsible for essential functions in this process remain largely unknown, particularly the down-regulated genes induced by cold acclimation. To investigate the genes involved in cold acclimation, this study employed real-time quantitative PCR (RT-qPCR), molecular cloning, microinjection techniques, and cold stress experiments to determine the genes that play an essential part in cold acclimation. Consequently, 18 genes were discovered to be down-regulated in larval zebrafish experiencing cold stress. All 18 genes successfully detected overexpression in zebrafish at 96 and 126 hpf (fold change ≥3), which declined with the growth of zebrafish. Following microinjection, it was observed that her8a, cyp51, lss, txnipb, and bhlha9 had an adverse impact on the survival rate of zebrafish larvae under cold stress. These genes have been identified to play significant roles in various biological processes. For instance, bhlha9 has been found to be involved in both limb development and temperature sensing and her8a has been implicated in neural development. Additionally, cyp51 and lss have been identified as participants in the cholesterol synthesis pathway. Txnipb has been reported to induce cell apoptosis, thereby potentially influencing the survival rate of zebrafish larvae under cold stress. These findings offered crucial data for the analysis of molecular processes related to cold tolerance and the development of cold-resistant fish breeding.

Rational design of a multi-epitope vaccine against heartland virus (HRTV) using immune-informatics, molecular docking and dynamics approaches.

Heartland virus (HRTV) is a single-stranded negative-sense RNA virus that infects human beings. Because there are no antiviral medications available to treat HRTV infection, supportive care management is used in cases of severe disease. Therefore, it has spurred research into developing a multi-epitope vaccine capable of providing effective protection against HRTV infection. A multi-epitope vaccine was created using a combination of immuno-informatics, molecular docking and molecular dynamics simulation in this investigation. The HRTV proteome was utilized to predict B-cell, T-cell (HTL and CTL), and IFN-epitopes. Following prediction, highly antigenic, non-allergenic and immunogenic epitopes were chosen, including 6 CTL, 8 HTL, and 5 LBL epitopes that were connected to the final peptide by AAY, GPGPG, and KK linkers, respectively. An adjuvant was introduced to the vaccine's N-terminal through the EAAAK linker to increase its immunogenicity. Following the inclusion of linkers and adjuvant, the final construct has 359 amino acids. The presence of B-cell and IFN-γ-epitopes validates the construct's acquired humoral and cell-mediated immune responses. To ensure the vaccine's safety and immunogenicity profile, its allergenicity, antigenicity, and various physicochemical characteristics were assessed. Docking was used to assess the binding affinity and molecular interaction between the vaccination and TLR-3. In silico cloning was used to confirm the construct's validity and expression efficiency. The results of these computer assays demonstrated that the designed vaccine is highly promising in terms of developing protective immunity against HRTV; nevertheless, additional in vivo and in vitro investigations are required to validate its true immune-protective efficiency.

Optimization of handmade cloning technique in sheep and preliminary investigation of umbilical cord mesenchymal stem cells as donor nuclei.

Handmade cloning (HMC) has a higher yield and is relatively less difficult to operate compared to traditional micromanipulation cloning. Yet, there are few reports on handmade cloning in sheep. Therefore, this study investigates the key nodes such as AC and DC voltage, denucleation method and fusion method in sheep handmade cloning. In addition, it compares the effects of fibroblasts (FC) and umbilical cord mesenchymal stem cells (UC-MSCs) of different states as donors on the development of HMC embryos. Furthermore, the effect of different freezing solutions on the survival rate of frozen blastocysts without zona pellucida was also investigated. The results indicate that an AC voltage of 150 V/cm and a DC voltage of 1800 V/cm significantly enhanced the fusion and blastocyst rates (p < .01). The blastocyst rate achieved with umbilical cord MSCs as nucleus donors was significantly higher (40.3%) than that achieved with fibroblasts and differentiated umbilical cord MSCs (21.5%, 22.5%) (p < .01). The highest survival rate was achieved using 20% DMSO + 20% EG for freezing without zona pellucida. In conclusion, the most efficient and pregnant ovine HMC cloning method using 150 V/cm AC, 1800 V/cm DC, knife-cut denucleation, two-step fusion and the use of UC-MSCs as nucleus donors resulted in the highest overall efficiency and pregnancy after transplantation.

Efficient cloning of linear DNA inserts (ECOLI) into plasmids using site-directed mutagenesis.

This study introduces a novel cost-effective technique for cloning of linear DNA plasmid inserts, aiming to address the associated expenses linked with popular in vitro DNA assembly methods. Specifically, we introduce ECOLI (Efficient Cloning Of Linear Inserts), a method utilizing a PCR product-based site-directed mutagenesis. In comparison to other established in vitro DNA assembly methods, our approach is without the need for costly synthesis or specialized kits for recombination or restriction sites. ECOLI offers a fast, efficient, and economical alternative for cloning inserts up to several hundred nucleotides into plasmid constructs, thus enhancing cloning accessibility and efficiency. This method can enhance molecular biology research, as we briefly demonstrated on the Dishevelled gene from the WNT signaling pathway.

Unveiling mungbean yellow mosaic virus: molecular insights and infectivity validation in mung bean (Vigna radiata) via infectious clones.

Yellow mosaic disease (YMD) with typical symptoms of alternating bright yellow to green patches associated with stunting, downward cupping, and wrinkling has been observed in mung bean on agricultural farms in Coimbatore, Tamil Nadu, India. PCR using gene-specific primers indicated the presence of the yellow mosaic virus in symptomatic plants. Rolling circle amplification (RCA) followed by restriction digestion detected ~2.7 kb of DNA-A and DNA-B, allowing the identification of a bipartite genome. The full-length genome sequences were deposited in NCBI GenBank with the accession numbers MK317961 (DNA-A) and MK317962 (DNA-B). Sequence analysis of DNA-A showed the highest sequence identity of 98.39% to the DNA-A of mungbean yellow mosaic virus (MYMV)-Vigna radiata (MW736047), while DNA-B exhibited the highest level of identity (98.21%) to the MYMV-Vigna aconitifolia isolate (DQ865203) reported from Tamil Nadu. Recombinant analysis revealed distinct evidence of recombinant breakpoints of DNA-A within the region encoding the open reading frame (ORF) AC2 (transcription activation protein), with the major parent identified as MYMV-PA1 (KC9111717) and the potential minor parent as MYMV-Namakkal (DQ86520.1). Interestingly, a recombination event in the common region (CR) of DNA-B, which encodes the nuclear shuttle protein and the movement protein, was detected. MYMIV-M120 (FM202447) and MYMV-Vigna (AJ132574) were identified as the event's major and minor parents, respectively. This large variation in DNA-B led us to suspect a recombination in DNA-B. Dimeric MYMV infectious clones were constructed, and the infectivity was confirmed through agroinoculation. In future prospects, unless relying on screening using whiteflies, breeders and plant pathologists can readily use this agroinoculation procedure to identify resistant and susceptible cultivars to YMD.

A series of vectors for inducible gene expression in multidrug-resistant Acinetobacter baumannii.

The continued emergence of antibiotic resistance among bacterial pathogens remains a significant challenge. Indeed, the enhanced antibiotic resistance profiles of contemporary pathogens often restrict the number of suitable molecular tools that are available. We have constructed a series of plasmids that confer resistance to two infrequently used antibiotics with variants of each plasmid backbone incorporating several regulatory control systems. The regulatory systems include both commonly used systems based on the lac- and arabinose-controlled promoters found in Escherichia coli, as well as less frequently used systems that respond to tetracycline/anhydrotetracycline and toluic acid. As a test case, we demonstrate the utility of these plasmids for regulated and tunable gene expression in a multidrug-resistant (MDR) isolate of Acinetobacter baumannii, strain AB5075-UW. The plasmids include derivatives of a freely replicating, broad-host-range plasmid allowing for inducible gene expression as well as a set of vectors for introducing genetic material at the highly conserved Tn7-attachment site. We also modified a set of CRISPR-interference plasmids for use in MDR organisms, thus allowing researchers to more readily interrogate essential genes in currently circulating clinical isolates. These tools will enhance molecular genetic analyses of bacterial pathogens in situations where existing plasmids cannot be used due to their antibiotic resistance determinants or lack of suitable regulatory control systems. IMPORTANCE: Clinical isolates of bacterial pathogens often harbor resistance to multiple antibiotics, with Acinetobacter baumannii being a prime example. The drug-resistance phenotypes associated with these pathogens represent a significant hurdle to researchers who wish to study modern isolates due to the limited availability of plasmid tools. Here, we present a series of freely replicating and Tn7-insertion vectors that rely on selectable markers to less frequently encountered antibiotics, apramycin, and hygromycin. We demonstrate the utility of these plasmid tools through a variety of experiments looking at a multidrug-resistant strain of A. baumannii, strain AB5075. Strain AB5075 is an established model strain for present-day A. baumannii, due in part to its genetic tractability and because it is a representative isolate of the globally disseminated multidrug-resistant clade of A. baumannii, global clone 1. In addition to the drug-selection markers facilitating use in strains resistant to more commonly used antibiotics, the vectors allow for controllable expression driven by several regulatory systems, including isopropyl ß-D-1-thiogalactopyranoside (IPTG), arabinose, anhydrotetracycline, and toluic acid.

Metabolic pathway engineering of high-salinity-induced overproduction of L-proline improves high-salinity stress tolerance of an ectoine-deficient Halomonas elongata.

Halophilic bacteria have adapted to survive in high-salinity environments by accumulating amino acids and their derivatives as organic osmolytes. L-Proline (Pro) is one such osmolyte that is also being used as a feed stimulant in the aquaculture industry. Halomonas elongata OUT30018 is a moderately halophilic bacterium that accumulates ectoine (Ect), but not Pro, as an osmolyte. Due to its ability to utilize diverse biomass-derived carbon and nitrogen sources for growth, H. elongata OUT30018 is used in this work to create a strain that overproduces Pro, which could be used as a sustainable Pro-rich feed additive. To achieve this, we replaced the coding region of H. elongata OUT30018's Ect biosynthetic operon with the artificial self-cloned proBm1AC gene cluster that encodes the Pro biosynthetic enzymes: feedback-inhibition insensitive mutant γ-glutamate kinase (γ-GKD118N/D119N), γ-glutamyl phosphate reductase, and pyrroline-5-carboxylate reductase. Additionally, the putA gene, which encodes the key enzyme of Pro catabolism, was deleted from the genome to generate H. elongata HN6. While the Ect-deficient H. elongata KA1 could not grow in minimal media containing more than 4% NaCl, H. elongata HN6 thrived in the medium containing 8% NaCl by accumulating Pro in the cell instead of Ect, reaching a concentration of 353.1 ± 40.5 µmol/g cell fresh weight, comparable to the Ect accumulated in H. elongata OUT30018 in response to salt stress. With its genetic background, H. elongata HN6 has the potential to be developed into a Pro-rich cell factory for upcycling biomass waste into single-cell feed additives, contributing to a more sustainable aquaculture industry.IMPORTANCEWe report here the evidence for de novo biosynthesis of Pro to be used as a major osmolyte in an ectoine-deficient Halomonas elongata. Remarkably, the concentration of Pro accumulated in H. elongata HN6 (∆ectABC::mCherry-proBm1AC ∆putA) is comparable to that of ectoine accumulated in H. elongata OUT30018 in response to high-salinity stress. We also found that among the two γ-glutamate kinase mutants (γ-GKD118N/D119N and γ-GKD154A/E155A) designed to resemble the two known Escherichia coli feedback-inhibition insensitive γ-GKD107N and γ-GKE143A, the γ-GKD118N/D119N mutant is the only one that became insensitive to feedback inhibition by Pro in H. elongata. As Pro is one of the essential feed additives for the poultry and aquaculture industries, the genetic makeup of the engineered H. elongata HN6 would allow for the sustainable upcycling of high-salinity waste biomass into a Pro-rich single-cell eco-feed.

The introgression of BjMYB113 from Brassica juncea leads to purple leaf trait in Brassica napus.

The purple leaves of Brassica napus are abundant in anthocyanins, which are renowned for their role in conferring distinct colors, stress tolerance, and health benefits, however the genetic basis of this trait in B. napus remains largely unelucidated. Herein, the purple leaf B. napus (PL) exhibited purple pigments in the upper epidermis and a substantial increase in anthocyanin accumulation, particularly of cyanidin, compared to green leaf B. napus (GL). The genetic control of the purple leaf trait was attributed to a semi-dominant gene, pl, which was mapped to the end of chromosome A03. However, sequencing of the fragments amplified by the markers linked to pl indicated that they were all mapped to chromosome B05 from B. juncea. Within this B05 chromosomal segment, the BjMYB113 gene-specific marker showed perfect co-segregation with the purple leaf trait in the F2 population, suggesting that the BjMYB113 introgression from B. juncea was the candidate gene for the purple leaf trait in B. napus. To further verify the function of candidate gene, CRISPR/Cas9 was performed to knock out the BjMYB113 gene in PL. The three myb113 mutants exhibited evident green leaf phenotype, absence of purple pigments in the adaxial epidermis, and a significantly reduced accumulation of anthocyanin compared to PL. Additionally, the genes involved in positive regulatory (TT8), late anthocyanin biosynthesis (DFR, ANS, UFGT), as well as transport genes (TT19) were significantly suppressed in the myb113 mutants, further confirming that BjMYB113 was response for the anthocyanin accumulation in purple leaf B. napus. This study contributes to an advanced understanding of the regulation mechanism of anthocyanin accumulation in B. napus.

The full-length genomic sequence of the HLA-G*01:19 allele.

Full genomic sequence shows HLA-G*01:19 differs from HLA-G*01:04:01:01 only at position 99 in exon 2.

An immunoinformatics approach for design and validation of multi-subunit vaccine against Plasmodium falciparum from essential hypothetical proteins.

Malaria, caused by Plasmodium falciparum, remains a pressing global health concern. Advancements in combating this parasite involve the development of a protein vaccine. This study employs immunoinformatics to identify potential vaccine candidates within the repertoire of 218 P. falciparum exported essential proteins identified through saturaturation mutagenesis study. Our screening approach narrows down to 65 Plasmodium-exported proteins with uncharacterized functions while exhibiting non-mutability in CDS (coding sequences). The transmembrane helix, antigenicity, allergenicity of the shortlisted proteins was assessed through diverse prediction algorithm, culminating in the identification of five promising vaccination contenders, based on probability scores. We discerned B-cell, helper T-lymphocyte, and cytotoxic T-lymphocyte epitopes. Two proteins with the most favorable epitope were harnessed to construct a multi-subunit vaccine, through judicious linker integration. Employing the I-TASSER software, three-dimensional models of the constituent proteins was obtained and was validated using diverse tools like ProSA, VERIFY3D, and ERRAT. The modelled proteins underwent Molecular Dynamics (MD) simulation in a solvent environment to evaluate the stability of the multi-subunit vaccine. Furthermore, we conducted molecular docking through the ClusPro web server to elucidate potential interactions with Toll-like receptors (TLR2 and TLR4). Docking scores revealed a pronounced affinity of the multi-subunit vaccine for TLR2. Significantly, 100 ns MD simulation of the protein-receptor complex unveiled a persistent hydrogen bond linkage between the ARG63 residue of the sub-unit vaccine and the GLU32 residue of the TLR2 receptor. These findings collectively advocate the potential efficacy of the first multi-subunit vaccine from the potential hypothetical proteins of P. falciparum. Supplementary Information: The online version contains supplementary material available at 10.1007/s12639-024-01696-w.

Circular PCR as an efficient and precise umbrella of methods for the generation of circular dsDNA with staggered nicks: Mechanism and types.

Here, we introduce the highly versatile circular polymerase chain reaction (CiPCR) technique, propose a mechanism of action, and describe a number of examples demonstrating the versatility of this technique. CiPCR takes place between two fragments of dsDNA with two homologous regions, as long as one of the fragments carries said regions at its 3'- and 5'-ends. Upon hybridization, elongation by a polymerase occurs from all 3'-ends continuously until a 5'-end is reached, leading to stable circular dsDNA with staggered nicks. When both dsDNA fragments carry the homology at their 3'- and 5'-ends (Type I CiPCR), all four 3'-ends effectively prime amplification of the intervening region and CiPCR products can function as template during the reaction. In contrast, when only one of the two dsDNA fragments carries the homologous regions at its 3'- and 5'-ends and the other carries such regions internally (Type II CiPCR), only two 3'-ends can be amplified and CiPCR products possess no template activity. We demonstrate the applicability of both CiPCR types via well-illustrated experimental examples. CiPCR is well adapted to the quick resolution of most of the molecular cloning challenges faced by the biology/biomedicine laboratory, including the generation of insertions, deletions, and mutations.

Molecular characterization, tissue expression, and antiviral activities of Bama minipig interferon-α subtypes.

Interferons play a major role in innate immunity and disease resistance. Porcine interferon alpha has 17 subtypes, and their gene sequences, tissue expression profiles, and antiviral activities have been primarily studied in domestic pigs but not in minipigs. Bama minipigs are genetically stable disease-resistant and making them as laboratory animal models for bioscience studies. To define the potential mechanism for disease resistance, in this study, we cloned 17 subtypes of Porcine interferon alpha genes in Bama minipigs using high fidelity polymerase chain reaction and subsequent sequencing. Sequence alignment showed that the 17 porcine interferon alpha subtypes were 98%-100 % homologous in those of domestic pigs. However, significantly different tissue expression profiles of PoIFN-α subtypes were found in the two pig species using real-time quantitative RT-PCR. Among the 10 different Bama minipig tissues tested, significant expression of multi-subtype porcine interferon alpha was detected in the lymph nodes and spleen, whereas no or low expression of fewer subtypes was detected in the heart, lung, brain, and small intestine. Sequence analysis revealed that the porcine interferon alpha promoters were almost similar between the two pig species. A cytopathic effect inhibition assay showed that the recombinant 17 porcine interferon alpha subtypes purified from mammalian cells had significantly different antiviral profile against vesicular stomatitis virus, porcine pseudorabies virus and porcine reproductive and respiratory syndrome virus compared with those in domestic pigs. Our findings provide evidence that porcine interferon alpha subtypes are highly conserved between Bama minipigs and domestic pigs but show varied tissue expression pattern and antiviral capabilities, which may contribute to their differences in disease resistance.