ABSTRACT
Phytohormones play a role in regulating microalgae cells tolerance to adversity. This paper examines the effects of different temperatures (20 °C, 25 °C, 30 °C and 35 °C) on the physiological characteristics and endogenous phytohormones of the Isochrysis Zhanjiangensis (IZ) and its mutagenic strain (3005). The results showed that the endogenous phytohormones indole acetic acid (IAA) and jasmonic acid (JA) exhibited significant differences (P<0.05) between the two strains. The addition of 0.5 mg·L-1 exogenous JA inhibitor ibuprofen (IBU) improved cell growth of IZ, and was extremely effective in the accumulation of polysaccharides, which accounted for 33.25 %. Transcriptomic analyses revealed that genes involved in photosynthesis, such as PetC and PsbO, exhibited significantly elevated expression of the strain IZ, while the pathways related to JA synthesis may be the factor affecting microalgae temperature tolerance. This study provides a theoretical foundation for elucidating the underlying mechanisms and potential applications for high temperature tolerance in IZ.
ABSTRACT
OBJECTIVE: The aim of this study was to conduct a comprehensive evaluation of the rehydration efficacy of QSBYD and elucidate its potential underlying mechanism. DESIGN: 38 participants were randomly assigned to receive either QSBYD or placebo before and after exercise and heat-induced dehydration. Hydration indicators were measured over time. Blood tests assessed cellular anaerobic respiration metabolites, serum inflammatory markers, and coagulation markers. Perceptual measures of thirst, fatigue, and muscular soreness were also taken. RESULTS: QSBYD consumption resulted in lower urine volume (Control vs. QSBYD: 260.83 ± 167.99 ml vs. 187.78 ± 141.34 ml) and smaller decrease in percentage of nude body weight change from baseline (Control vs. QSBYD: -0.52 ± 0.89% vs. -0.07 ± 0.52%). Although no significant differences in urine specific gravity, QSBYD resulted in reduced urine volume at 120 min, suggesting improved fluid retention. Furthermore, QSBYD resulted in lower levels of IL-1ß (Control vs. QSBYD: 2.40 ± 0.68 vs. 1.33 ± 0.66 pg/mL), suggesting QSBYD may provide benefits beyond hydration. CONCLUSION: Further investigation into the underlying mechanisms and long-term effects of QSBYD on hydration is warranted. QSBYD may be an effective alternative to commercial sports drinks in mitigating dehydration effects.
Subject(s)
Dehydration , Drugs, Chinese Herbal , Exercise , Fluid Therapy , Hot Temperature , Interleukin-1beta , Humans , Dehydration/therapy , Dehydration/prevention & control , Fluid Therapy/methods , Male , Exercise/physiology , Drugs, Chinese Herbal/pharmacology , Drugs, Chinese Herbal/administration & dosage , Interleukin-1beta/blood , Young Adult , Female , Adult , Thirst/drug effects , Myalgia/prevention & control , Myalgia/drug therapy , Myalgia/therapy , Fatigue/prevention & control , Fatigue/drug therapyABSTRACT
Metal oxide gas sensors (MOGS), crucial components in monitoring air quality and detecting hazardous gases, are well known for their poisoning effects when exposed to certain gas molecules, such as hydrogen sulfide. Surprisingly, our research reveals that high-temperature H2S treatment leads to an enhancement effect rather than response decay. This study investigates the time-decaying response enhancement, being attributed to the formation of metal sulfide and metal sulfate on the metal oxide's surface, enhancing the electronic sensitization. Such an enhancement effect is demonstrated for various gases, including CO, CH3CH2OH, CH4, HCHO, and NH3. Additionally, the impacts of H2S treatment on the response and recovery time are also observed. Surface compositional analysis are conducted with X-ray photoelectron spectroscopy. A proposed mechanism for the enhancement effect is elaborated, highlighting the role of electronic sensitization and the sulfide-sulfate component. This research offers valuable insights into the potential applications of metal oxide sensors in sulfide-presented harsh environments in gas sensing, encouraging future exploration of optimized sensor materials, operation temperature, and the development of hydrogen sulfide poisoning-resistant and higher sensitivity MOGS.
Subject(s)
Gases , Hydrogen Sulfide , Oxides , Hydrogen Sulfide/analysis , Oxides/chemistry , Gases/chemistry , Gases/analysis , Hot Temperature , Metals/chemistryABSTRACT
A prompt γ-ray neutron activation analysis system has recently been developed at China advanced research reactor (CARR), the 60 MW research reactor in China Institute of Atomic Energy (CIAE). The system is set at the cold neutron beam guide with a thermal equivalent neutron flux at the sample position of 1.0 × 109 n·cm-2·s-1 with the power of 30 MW, and it is mainly composed of a neutron beam collimator, a sample chamber, a beam stopper, neutron and γ-ray shieldings and a detection system. The detection system can realize three modes of measurement: single, Compton suppression, and pair modes. The detection efficiency was calibrated up to 11 MeV using a set of radionuclides and the (n, γ) reactions of N and Cl. Boron, one of the most important elements in high-temperature alloy material studies, was analyzed in this work, as the first pilot experiment of the CARR-PGNAA system. The analytical sensitivity of 2000 cps/mg-B was obtained. The results verified the feasibility of the CARR-PGNAA system to measure boron in high-temperature alloys, and laid a foundation for the accurate quantification of boron in the next step.
ABSTRACT
High temperature stress is one of the most severe forms of abiotic stress in alfalfa. With the intensification of climate change, the frequency of high temperature stress will further increase in the future, which will bring challenges to the growth and development of alfalfa. Therefore, untargeted metabolomic and RNA-Seq profiling were implemented to unravel the possible alteration in alfalfa seedlings subjected to different temperature stress (25 â, 30 â, 35 â, 40 â) in this study. Results revealed that High temperature stress significantly altered some pivotal transcripts and metabolites. The number of differentially expressed genes (DEGs) markedly up and down-regulated was 1876 and 1524 in T30_vs_CK, 2, 815 and 2667 in T35_vs_CK, and 2115 and 2, 226 in T40_vs_CK, respectively. The number for significantly up-regulated and down-regulated differential metabolites was 173 and 73 in T30_vs_CK, 188 and 57 in T35_vs_CK, and 220 and 66 in T40_vs_CK, respectively. It is worth noting that metabolomics and transcriptomics co-analysis characterized enriched in plant hormone signal transduction (ko04705), glyoxylate and dicarboxylate metabolism (ko00630), from which some differentially expressed genes and differential metabolites participated. In particular, the content of hormone changed significantly under T40 stress, suggesting that maintaining normal hormone synthesis and metabolism may be an important way to improve the HTS tolerance of alfalfa. The qRT-PCR further showed that the expression pattern was similar to the expression abundance in the transcriptome. This study provides a practical and in-depth perspective from transcriptomics and metabolomics in investigating the effects conferred by temperature on plant growth and development, which provided the theoretical basis for breeding heat-resistant alfalfa.
Subject(s)
Medicago sativa , Metabolomics , Transcriptome , Medicago sativa/genetics , Medicago sativa/metabolism , Medicago sativa/physiology , Gene Expression Profiling , Metabolome , Gene Expression Regulation, Plant , Hot Temperature , Stress, Physiological/genetics , Seedlings/genetics , Seedlings/metabolism , Seedlings/physiology , Seedlings/growth & development , Heat-Shock Response/geneticsABSTRACT
Molten salts serve as effective high-temperature heat transfer fluids and thermal storage media used in a wide range of energy generation and storage facilities, including concentrated solar power plants, molten salt reactors and high-temperature batteries. However, at the salt-metal interfaces, a complex interplay of charge-transfer reactions involving various metal ions, generated either as fission products or through corrosion of structural materials, takes place. Simultaneously, there is a mass transport of ions or atoms within the molten salt and the parent alloys. The precise physical and chemical mechanisms leading to the diverse morphological changes in these materials remain unclear. To address this knowledge gap, this work employed a combination of synchrotron X-ray nanotomography and electron microscopy to study the morphological and chemical evolution of Ni-20Cr in molten KCl-MgCl2, while considering the influence of metal ions (Ni2+, Ce3+, and Eu3+) and variations in salt composition. Our research suggests that the interplay between interfacial diffusivity and reactivity determines the morphological evolution. The summary of the associated mass transport and reaction processes presented in this work is a step forward toward achieving a fundamental comprehension of the interactions between molten salts and alloys. Overall, the findings offer valuable insights for predicting the diverse chemical and structural alterations experienced by alloys in molten salt environments, thus aiding in the development of protective strategies for future applications involving molten salts.
ABSTRACT
The effectiveness of the room-temperature strengthening strategy for aluminum (Al) is compromised at increased temperatures due to grain and precipitate phase coarsening. Overcoming the heightened activity of grain boundaries and dislocations poses a significant challenge in enhancing the high-temperature strength through traditional precipitation strengthening. This study presents novel strengthening strategies that integrate intergranular reinforcements, intragranular reinforcements, refined grain, and stacking faults within an (Al2O3+Al3Ti)/Al composite prepared using sol-gel and powder metallurgy technology. Excellent high-temperature tensile properties are achieved; also, a remarkable fatigue performance at increased temperatures that surpasses those of other existing Al alloys and composites is revealed. These superior characteristics can be attributed to its exceptionally stable microstructure and the synergistic strengthening mechanisms mentioned above. This work offers new insights into designing and fabricating thermally stable Al matrix composites for high-temperature applications.
ABSTRACT
High temperature stress has long-term negative effects on the growth and development of silkworm (Bombyx mori). Different silkworm varieties show the different tolerance to high temperature. The induction of autophagy is linked to increased thermotolerance in diverse ectothermic organisms. However, the function of autophagy in the thermotolerant and thermosensitive silkworm strains under high-temperature conditions remains unclear. The thermotolerant Liangguang NO.2 and thermosensitive Jingsong × Haoyue strains were used to explore the role of autophagy in thermotolerance. Here, we first found that the larval body weight gain was increased in the thermosensitive Jingsong × Haoyue strain, but there was no difference in the thermotolerant Liangguang NO.2 strain under high temperature conditions. High temperature stress had a negative influence on the cocoon performance in both the Liangguang NO.2 and Jingsong × Haoyue strains. Additionally, the autophagy-related gene Atg5 mRNA expression in the Liangguang NO.2 strain was upregulated by high temperature, while the expression of Atg12 mRNA was reduced in the Jingsong × Haoyue strain. Titers of 20-Hydroxyecdysone and the ultraspiracle 1 mRNA expression in the Liangguang NO.2 strain were upregulated by high temperature, which might be associated with the induction of autophagy. These results demonstrate the potentially regulatory mechanism of autophagy in silkworms' tolerance to high temperature, providing a theoretical basis for exploring the physiological mechanism of thermotolerance in insects.
Subject(s)
Autophagy , Bombyx , Hot Temperature , Larva , Thermotolerance , Animals , Bombyx/growth & development , Bombyx/physiology , Bombyx/genetics , Larva/growth & development , Gastrointestinal Tract/growth & development , Ecdysterone , Insect Proteins/metabolism , Insect Proteins/geneticsABSTRACT
Silicides with potential to form a protective silica layer have garnered considerable attention as engineering ceramic materials. This research investigates the influence of initial composition and mechanical activation on the synthesis performance and microstructure of products in the Ti-Si-Mo system. Several compositions, including Ti8Mo29Si63, Ti15Mo25Si60, Ti22Mo22Si56, Ti40Mo12Si48, Ti52Mo6Si42, Ti62.5Si37.5, and Mo33Si67, were prepared and synthesized via mechanically activated self-propagating high-temperature synthesis (MASHS). XRD, SEM, and EDS analyses, along with related investigations such as grain size calculations and morphology studies, were performed. The results indicate that at low Ti concentrations, the composite contains (Ti0.8,Mo0.2)Si2 and MoSi2, whereas moderate Ti concentrations enable the formation of the MoSi2-Ti5Si3 composite. Moreover, a high amount of Mo can extensively dissolve into the titanium and titanium silicide structure, resulting in the synthesis of the (Ti,Mo)5Si3 phase in Ti-rich samples. The dissolution of Mo in the crystal structure of the compound decreases the lattice parameters of titanium silicide. Furthermore, mechanical activation facilitates the initiation of reactions in compositions with lower Ti content and yielding fine-grained products.
ABSTRACT
BACKGROUND: High-temperature (HT) stress significantly affects the quality of rice (Oryza sativa L.), although the underlying the mechanism remains unknown. Therefore, in the present study, we assessed protein components, amino acids, mineral element levels, starch biosynthesis enzyme activity and gene expression of two heat-sensitive and two heat-tolerant genotypes under HT treatment during early (from 1 to 10 days, T1) and mid-filling (from 11 to 20 days, T2) after anthesis. RESULTS: Except for one cultivar, most rice varieties exhibited increased levels of amylose, chalky degree and protein content, along with elevated cracked grains and pasting temperatures and, consequently, suppressed amino acid levels under HT stress. HT treatment also increased protein components, macro- (Mg, K, P and S) and microelements (Cu, Zn, and Mo) in the rice flour. Both HT treatments reduced the activity of ADP-glucose pyrophosphate, ground-bound starch synthase, as well as the relative ratio of amylose to total starch, at the same time increasing starch branch enzyme activity. The expression levels of OsAGPL2, OsSSS1 and OsSBE1 in all varieties exhibited the same trends as enzyme activity under HT treatment. CONCLUSION: High temperatures negatively affected rice quality during grain filling, which is related to heat tolerance and grain shape. Altered enzymatic activity is crucial to compensate for the lowered enzyme quality under heat stress. © 2024 Society of Chemical Industry.
ABSTRACT
Drought is a major abiotic stress that occurs frequently due to climate change, severely hampers agricultural production, and threatens food security. In this study, the effect of drought-tolerant PGPRs, i.e., PGPR-FS2 and PGPR-VHH4, was assessed on wheat by withholding water. The results indicate that drought-stressed wheat seedlings treated with PGPRs-FS2 and PGPR-VHH4 had a significantly higher shoot and root length, number of roots, higher chlorophyll, and antioxidant enzymatic activities of guaiacol peroxidase (GPX) compared to without PGPR treatment. The expression study of wheat genes related to tryptophan auxin-responsive (TaTAR), drought-responsive (TaWRKY10, TaWRKY51, TaDREB3, and TaDREB4) and auxin-regulated gene organ size (TaARGOS-A, TaARGOS-B, and TaARGOS-D) exhibited significantly higher expression in the PGPR-FS2 and PGPR-VHH4 treated wheat under drought as compared to without PGPR treatment. The results of this study illustrate that PGPR-FS2 and PGPR-VHH4 mitigate the drought stress in wheat and pave the way for imparting drought in wheat under water deficit conditions. Among the two PGPRs, PGPR-VHH4 more efficiently altered the root architecture to withstand drought stress.
ABSTRACT
The common presence of glycidyl esters (GEs) in refined vegetable oils has been a concern for food safety. The present study aimed to investigate the inhibitory effects of three carotenoids derived from Haematococcus pluvialis microalga on GE formation in both rice oil and a chemical model during heating. The addition of astaxanthin (AS), lutein (LU), and ß-carotene (CA) at 0.6 mg/g in rice oil can reduce GE formation by 65.0%, 57.1%, and 57.5%, respectively, which are significantly higher than those achieved by common antioxidants such as l-ascorbyl palmitate (39.0%), α-tocopherol (18.5%), tert-butyl hydroquinone (42.7%), and quercetin (26.2%). UPLC-Q-TOF-MS/MS analysis showed that two new compounds, that is, propylene glycol monoester and diester of palmitic acid, were formed in the CA-added chemical model, which provided direct experimental evidence for the inhibition of antioxidants including AS, LU, and CA against GE formation not only by indirect antioxidative action but also by direct radical reactions to competitively prevent the formation of cyclic acyloxonium intermediates. Furthermore, it was interestingly found that only AS could react with the GEs. The adduct of AS with GEs, astaxanthin-3-O-propanetriol esters, was preliminarily identified using Q-TOF-MS/MS in the heated AS-GE model, suggesting that reacting with GEs might represent another distinct mechanism of AS to eliminate GEs.
ABSTRACT
C2 photosynthesis is a photosynthetic pathway in which photorespiratory CO2 release and refixation are enhanced in leaf bundle sheath (BS) tissues. The evolution of C2 photosynthesis has been hypothesized to be a major step in the origin of C4 photosynthesis, highlighting the importance of studying C2 evolution. In this study, physiological, anatomical, ultrastructural, and immunohistochemical properties of leaf photosynthetic tissues were investigated in six non-C4 Tribulus species and four C4 Tribulus species. At 42°C, T. cristatus exhibited a photosynthetic CO2 compensation point in the absence of respiration (C*) of 21 µmol mol-1, below the C3 mean C* of 73 µmol mol-1. Tribulus astrocarpus had a C* value at 42°C of 55 µmol mol-1, intermediate between the C3 species and the C2 T. cristatus. Glycine decarboxylase (GDC) allocation to BS tissues was associated with lower C*. Tribulus cristatus and T. astrocarpus allocated 86% and 30% of their GDC to the BS tissues, respectively, well above the C3 mean of 11%. Tribulus astrocarpus thus exhibits a weaker C2 (termed sub-C2) phenotype. Increased allocation of mitochondria to the BS and decreased length-to-width ratios of BS cells, were present in non-C4 species, indicating a potential role in C2 and C4 evolution.
Subject(s)
Biological Evolution , Photosynthesis , Plant Leaves , Photosynthesis/physiology , Plant Leaves/physiology , Plant Leaves/metabolism , Carbon Dioxide/metabolism , Glycine Dehydrogenase (Decarboxylating)/metabolismABSTRACT
The purpose of this study is to investigate the effects of non-obese MAFLD on the gut microbiota and metabolic pathways caused by high-temperature processed meals. It was decided to divide the eighteen male Sprague-Dawley rats into three groups: the control group, the dry-fried soybeans (DFS) group, and the high-fat diet (HFD) group. Following the passage of twelve weeks, a series of physical, biochemical, histological, and microbiological examinations were carried out. There were distinct pathological abnormalities brought about by each diet. The DFS diet was found to cause the development of fatty liver and to demonstrate strong relationships between components of the gut microbiota, such as Akkermansia and Mucispirillum, and indices of liver health. Diet-induced changes in the gut microbiome have a significant impact on liver pathology in non-obese patients with metabolically altered liver disease (MAFLD), which suggests that dietary interventions that target gut microbiota could be used to manage or prevent the illness.
ABSTRACT
Lithium tantalate (LiTaO3) perovskite finds wide use in pyroelectric detectors, optical waveguides and piezoelectric transducers, stemming from its good mechanical and chemical stability and optical transparency. Herein, we present a method for synthesis of LiTaO3 nanoparticles using a scalable Flame Spray Pyrolysis (FSP) technology, that allows the formation of LiTaO3 nanomaterials in a single step. Raman, XRD and TEM studies allow for comprehension of the formation mechanism of the LiTaO3 nanophases, with particular emphasis on the penetration of Li atoms into the Ta-oxide lattice. We show that, control of the High-Temperature Particle Residence Time (HTPRT) in the FSP flame, is the key-parameter that allows successful penetration of the -otherwise amorphous- Li phase into the Ta2O5 nanophase. In this way, via control of the HTPRT in the FSP process, we synthesized a series of nanostructured LiTaO3 particles of varying phase composition from {amorphous Li/Ta2O5/LiTaO3} to {pure LiTaO3, 15-25 nm}. Finally, the photophysical activity of the FSP-made LiTaO3 was validated for photocatalytic H2 production from H2O. These data are discussed in conjunction with the role of the phase composition of the LiTaO3 nanoparticles. More generally, the present work allows a better understanding of the mechanism of ABO3 perovskite formation that requires the incorporation of two cations, A and B, into the nanolattice.
ABSTRACT
Silica aerogels exhibit a unique nanostructure with low thermal conductivity and low density, making them attractive materials for thermal isolation under extreme conditions. The TiO2 particle is one of the common industrial additives used to reduce the thermal radiation of aerogel composites under high-temperature environments, but its influence on thermal resistance is almost unknown. Herein, we report the effect of TiO2 nanoparticles with different crystal phases and different sizes on the thermal stability of silica aerogel composites. By adding TiO2 nanoparticles, the aerogel can significantly resist collapse at high temperatures (up to 1000 °C). And compared with the rutile phase TiO2, the anatase phase TiO2 shows much higher temperature resistance performance, with shrinkage of only one-sixth of the rutile phase after 800 °C treatment. Interestingly, energy-dispersive spectrometer mapping results show that after 800 °C treatment, silica nanoparticles (NPs) are squeezed out in between anatase TiO2 particles, which resists the coarsening of silica NPs and ultimately enhances the stability of aerogel composites. The optimal anatase phase TiO2-doped silica aerogel demonstrates the integrated properties of crack-free morphology (2.84% shrinkage), low thermal conductivity (29.30 mW/(m·K)) and low density (149.4 mg/cm3) after 800 °C treatment. This study may provide new insights for developing oxide-doped silica aerogels with both high-temperature resistance and low thermal radiation.
ABSTRACT
Arsenic (As), a toxic element, contaminates farmlands, rivers, and groundwater, posing severe environmental and health risks. Notably, As-containing materials in tailings are affected by temperature variations during long-term storage, and this considerably impact the oxidation and migration of elements in arsenopyrite.This study focused on arsenopyrite and investigated the process of its oxidative dissolution and release of arsenic under different temperature conditions by using in-situ XRD, in-situ XPS and electron paramagnetic resonance spectroscopy(EPR), The role of oxygen free radicals in the oxidation of arsenopyrite was elucidated. It has been established that under high-temperature conditions As, iron (Fe), and sulfur (S) are primarily present As(V)/As(IV), Fe(III), and SO42-, respectively. The O2â - generated during the oxidation of As(III) by O2, OHâ produced by the Fe(II)/FeOH2+ reaction, and H2O2 formed via their interaction play a crucial role in the photochemical oxidation of arsenopyrite. These findings provide a theoretical basis for the formation of ferric arsenate precipitation, contributing in the adsorption and immobilisation of oxidatively released arsenic.
ABSTRACT
As a key device for solar energy conversion, solar absorbers play a critical role in improving the operating temperature of concentrated solar power (CSP) systems. However, solar absorbers with high spectral selectivity and good thermal stability at high temperatures in air are still scarce. This study presents a novel surface reconstruction strategy to improve the spectral selectivity of La0.5Sr0.5CoO3-δ (LSC5) for enhanced CSP application. The strategy could efficiently enhance the solar absorptance due to the existence of a high-absorption thin layer composed of nanoparticles on the LSC5 surface. Meanwhile, the crystal facet with low emittance on the LSC5 surface was exposed. Thus, the LSC5 that underwent surface reconstruction achieved a higher solar absorptance (â¼0.75) and lower infrared emittance (â¼0.19) compared to the original LSC5 (0.63/0.21), representing an improvement of nearly 32%. Additionally, the surface reconstructed LSC5 demonstrated a lower infrared thermographic temperature and a higher solar-thermal conversion equilibrium temperature compared to those of LSC5 and SiC. Moreover, the reconstructed LSC5 could maintain stable performance up to 800 °C in air, which might simplify the complexity of the CSP systems. The surface reconstruction strategy provided a new method to optimize the spectral selectivity of high-temperature stable ceramics, contributing to advancements in solar energy conversion technologies.
ABSTRACT
The development of white phosphors that can be activated in near-ultraviolet light is highly important in the field of LED lighting. In this work, a series of color-tunable Y2(Ti1-xHfx)2O7:Eu phosphors were prepared by adjusting the HfO2 and Eu3+ concentrations. In particular, white Y2(Ti0.8Hf0.2)2O7:Eu phosphors were successfully synthesized and emitted a broad band covering the entire visible light region upon excitation with 340 nm UV light. The white banded materials were composed of Eu2+ and Eu3+ emissions and HfO2 defect emission. The formation of Eu2+ ions was caused by the introduction of HfO2, which causes self-reduction of Eu3+ ions but does not require additional reducing agents. The white Y2(Ti0.8Hf0.2)2O7:Eu phosphors exhibit low color shifting at high temperature, which is very important for LED applications. The chromaticity shift of the Y2(Ti0.8Hf0.2)2O7:0.2Eu phosphor is 2.83 × 10-2 at 503 K, which is only 54.8 % that of commercial three-color white phosphors at the same temperature. The Ra value did not decrease significantly with increasing temperature and reached 90.2 at 383 K. Y2 (Ti0.8Hf0.2)2O7:0.2Eu phosphors were assembled with a 365 nm LED chip to fabricate a WLED device that showed excellent white-colored coordinates (0.345, 0.358) and a high Ra value of 90.1 under a 300 mA current.
ABSTRACT
High-temperature ultrasonic transducer (HTUT) is essential for non-destructive testing (NDT) in harsh environments. In this paper, a HTUT based on BiScO3-PbTiO3 (BS-PT) piezoelectric ceramics was developed, and the effect of different backing layers on its bandwidth were analyzed. The HTUT demonstrates a broad bandwidth and excellent thermal stability with operation temperature up to 400 °C. By using a 10 mm thick porous alumina backing layer, the HTUT achieves a broad -6 dB bandwidth of 100 %, which is about 4 times superior to the transducer with an air backing layer. The center frequency (fc) of the HTUT remains stable with fluctuations of less than 10 % across the temperature range from room temperature to 400 °C. The HTUT successfully detected simulated defects in pulse-echo mode for NDT over 200 °C. This research not only advances high-temperature ultrasonic transducer technology but also expands the NDT applications in harsh environmental conditions.